-
Designing optimal loop, saddle, and ellipse-based magnetic coils by spherical harmonic map**
Authors:
Peter James Hobson,
Noah Louis Hardwicke,
Alister Davis,
Thomas Smith,
Chris Morley,
Michael Packer,
Niall Holmes,
Max Alain Weil,
Matthew Brookes,
Richard Bowtell,
Mark Fromhold
Abstract:
Adaptable, low-cost, coils designed by carefully selecting the arrangements and geometries of simple primitive units are used to generate magnetic fields for diverse applications. These extend from magnetic resonance and fundamental physics experiments to active shielding of quantum devices including magnetometers, interferometers, clocks, and computers. However, finding optimal arrangements and g…
▽ More
Adaptable, low-cost, coils designed by carefully selecting the arrangements and geometries of simple primitive units are used to generate magnetic fields for diverse applications. These extend from magnetic resonance and fundamental physics experiments to active shielding of quantum devices including magnetometers, interferometers, clocks, and computers. However, finding optimal arrangements and geometries of multiple primitive structures is time-intensive and it is challenging to account for additional constraints, e.g. optical access, during the design process. Here, we demonstrate a general method to find these optimal arrangements. We encode specific symmetries into sets of loops, saddles, and cylindrical ellipses and then solve exactly for the magnetic field harmonics generated by each set. By combining these analytic solutions using computer algebra, we can use numerical techniques to efficiently map the landscape of parameters and geometries which the coils must satisfy. Sets of solutions may be found which generate desired target fields accurately while accounting for complexity and size restrictions. We demonstrate this approach by employing simple configurations of loops, saddles, and cylindrical ellipses to design target linear field gradients and compare their performance with designs obtained using conventional methods. A case study is presented where three optimized arrangements of loops, designed to generate a uniform axial field, a linear axial field gradient, and a quadratic axial field gradient, respectively, are hand-wound around a low-cost, 3D-printed coil former. These coils are used to null the background in a typical laboratory environment, reducing the magnitude of the axial field along the central half of the former's axis from $\left(7.8\pm0.3\right)$ $μ$T (mean $\pm$ st. dev.) to $\left(0.11\pm0.04\right)$ $μ$T.
△ Less
Submitted 14 July, 2023; v1 submitted 30 April, 2023;
originally announced May 2023.
-
Large-scale optical compression of free-space using an experimental three-lens spaceplate
Authors:
Nicholas J. Sorensen,
Michael T. Weil,
Jeff S. Lundeen
Abstract:
Recently introduced, spaceplates achieve the propagation of light for a distance greater than their thickness. In this way, they compress optical space, reducing the required distance between optical elements in an imaging system. Here we introduce a spaceplate based on conventional optics in a 4-$f$ arrangement, mimicking the transfer function of free-space in a thinner system - we term this devi…
▽ More
Recently introduced, spaceplates achieve the propagation of light for a distance greater than their thickness. In this way, they compress optical space, reducing the required distance between optical elements in an imaging system. Here we introduce a spaceplate based on conventional optics in a 4-$f$ arrangement, mimicking the transfer function of free-space in a thinner system - we term this device a three-lens spaceplate. It is broadband, polarization-independent, and can be used for meter-scale space compression. We experimentally measure compression ratios up to 15.6, replacing up to 4.4 meters of free-space, three orders of magnitude greater than current optical spaceplates. We demonstrate that three-lens spaceplates reduce the length of a full-color imaging system, albeit with reductions in resolution and contrast. We present theoretical limits on the numerical aperture and the compression ratio. Our design presents a simple, accessible, cost-effective method for optically compressing large amounts of space.
△ Less
Submitted 30 May, 2023; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Multi-Objective Latent Space Optimization of Generative Molecular Design Models
Authors:
A N M Nafiz Abeer,
Nathan Urban,
M Ryan Weil,
Francis J. Alexander,
Byung-Jun Yoon
Abstract:
Molecular design based on generative models, such as variational autoencoders (VAEs), has become increasingly popular in recent years due to its efficiency for exploring high-dimensional molecular space to identify molecules with desired properties. While the efficacy of the initial model strongly depends on the training data, the sampling efficiency of the model for suggesting novel molecules wit…
▽ More
Molecular design based on generative models, such as variational autoencoders (VAEs), has become increasingly popular in recent years due to its efficiency for exploring high-dimensional molecular space to identify molecules with desired properties. While the efficacy of the initial model strongly depends on the training data, the sampling efficiency of the model for suggesting novel molecules with enhanced properties can be further enhanced via latent space optimization. In this paper, we propose a multi-objective latent space optimization (LSO) method that can significantly enhance the performance of generative molecular design (GMD). The proposed method adopts an iterative weighted retraining approach, where the respective weights of the molecules in the training data are determined by their Pareto efficiency. We demonstrate that our multi-objective GMD LSO method can significantly improve the performance of GMD for jointly optimizing multiple molecular properties.
△ Less
Submitted 22 December, 2023; v1 submitted 1 March, 2022;
originally announced March 2022.
-
Environmental assessment of a new generation battery: The magnesium-sulfur system
Authors:
Claudia Tomasini Montenegro,
Jens F. Peters,
Manuel Baumann,
Zhirong Zhao-Karger,
Christopher Wolter,
Marcel Weil
Abstract:
As environmental concerns mostly drive the electrification of our economy and the corresponding increase in demand for battery storage systems, information about the potential environmental impacts of the different battery systems is required. However, this kind of information is scarce for emerging post-lithium systems such as the magnesium-sulfur (MgS) battery. Therefore, we use life cycle asses…
▽ More
As environmental concerns mostly drive the electrification of our economy and the corresponding increase in demand for battery storage systems, information about the potential environmental impacts of the different battery systems is required. However, this kind of information is scarce for emerging post-lithium systems such as the magnesium-sulfur (MgS) battery. Therefore, we use life cycle assessment following a cradle-to-gate perspective to quantify the cumulative energy demand and potential environmental impacts per Wh of the storage capacity of a hypothetical MgS battery (46 Wh/kg). Furthermore, we also estimate global warming potential (0.33 kg CO2 eq/Wh) , fossil depletion potential (0.09 kg oil eq / Wh), ozone depletion potential (2.5E-08 kg CFC-11/Wh) and metal depletion potential (0.044 kg Fe eq/Wh), associated with the MgS battery production. The battery is modelled based on an existing prototype MgS pouch cell and hypothetically optimised according to the current state of the art in lithium-ion batteries (LIB), exploring future improvement potentials. It turns out that the initial (non-optimised) prototype cell cannot compete with current LIB in terms of energy density or environmental performance, mainly due to the high share of non-active components, decreasing its performance substantially. Therefore, if the assumed evolutions of the MgS cell composition are achieved to overcome current design hurdles and reach a comparable lifespan, efficiency, cost and safety levels to that of existing LIB; then the MgS battery has significant potential to outperform both existing LIB, and lithium-sulfur batteries.
△ Less
Submitted 11 April, 2021; v1 submitted 8 April, 2021;
originally announced April 2021.
-
Chemical pressure effects on structural, dielectric and magnetic properties of solid solutions Mn3-xCoxTeO6
Authors:
S. A. Ivanov,
R. Mathieu,
P. Nordblad,
C. Ritter,
R. Tellgren,
N. Golubko,
A. Mosunov,
E. D. Politova,
M. Weil
Abstract:
The effects of Co2+ do** on the structural, magnetic and dielectric properties of the multiferroic frustrated antiferromagnet Mn3TeO6 have been investigated. Ceramic samples of the solid solution series Mn3-xCoxTeO6 were prepared by a solid-state reaction route. X-ray and neutron powder diffraction and electron microscopy techniques were combined with calorimetric, dielectric and magnetic measur…
▽ More
The effects of Co2+ do** on the structural, magnetic and dielectric properties of the multiferroic frustrated antiferromagnet Mn3TeO6 have been investigated. Ceramic samples of the solid solution series Mn3-xCoxTeO6 were prepared by a solid-state reaction route. X-ray and neutron powder diffraction and electron microscopy techniques were combined with calorimetric, dielectric and magnetic measurements to investigate the dependence of the crystal structure and physical properties on temperature and composition. It is shown that the compounds with x up to 2.4 all adopt the trigonal corundum-related structure of pure Mn3TeO6 (space group R-3) in the temperature range 5-295 K and that the lattice parameters a and c and the unit-cell volume V decrease linearly with increasing Co2+ concentration. The low- temperature magnetic susceptibility and heat capacity data evidence the antiferromagnetic ordering of all samples. The Neel temperature linearly increases with Co2+ concentration x. Curie-Weiss fits of the high temperature susceptibility indicate that the magnetic frustration decreases with x. The derived magnetic structure of Mn3TeO6 can be described as an incommensurately modulated magnetic spin state with k = [0, 0, kz] and an elliptical spin- spiral order of spins within the chains of MnO6 octahedra. With increasing Co2+ concentration the propagation vector kz changes from 0.453 (x = 0) to 0.516 (x = 2.4). The magnetic anisotropy changes as well, leading to a reorientation of the spiral-basal plane. A possible coexistence of long-range order of electrical dipoles and magnetic moments in Mn3-xCoxTeO6 is discussed.
△ Less
Submitted 11 October, 2013;
originally announced October 2013.
-
Enhancement of antiferromagnetic interaction and transition temperature in M3TeO6 systems (M = Mn, Co, Ni, Cu)
Authors:
R. Mathieu,
S. A. Ivanov,
P. Nordblad,
M. Weil
Abstract:
Several M3 TeO6 (M = Mn, Co, Ni, Cu) oxides order antiferromagnetically at low temperatures (near or below 60 K), while displaying interesting dielectric properties at high temperatures (ferroelectricity below 1000 K in M = Ni case). We have investigated and analyzed the structural and magnetic properties of Mn-doped Co3 TeO6 and Ni3 TeO6, which order antiferromagnetically at temperatures higher t…
▽ More
Several M3 TeO6 (M = Mn, Co, Ni, Cu) oxides order antiferromagnetically at low temperatures (near or below 60 K), while displaying interesting dielectric properties at high temperatures (ferroelectricity below 1000 K in M = Ni case). We have investigated and analyzed the structural and magnetic properties of Mn-doped Co3 TeO6 and Ni3 TeO6, which order antiferromagnetically at temperatures higher than their undoped counterparts.
△ Less
Submitted 26 August, 2013;
originally announced August 2013.
-
Spin and Dipole Ordering in Ni_2InSbO_6 and Ni_2ScSbO_6 with corundum-related structure
Authors:
S. A. Ivanov,
R. Mathieu,
P. Nordblad,
R. Tellgren,
C. Ritter,
E. Politova,
G. Kaleva,
A. Mosunov,
S. Stefanovich,
M. Weil
Abstract:
The complex metal oxides Ni2InSbO6 (NISO) and Ni2ScSbO6 (NSSO) have been prepared in form of polycrystalline powders by a solid state reaction route. The crystal structure and magnetic properties of the compounds were investigated using a combination of X-ray and neutron powder diffraction, electron microscopy, calorimetric and magnetic measurements. The compounds adopt a trigonal structure, space…
▽ More
The complex metal oxides Ni2InSbO6 (NISO) and Ni2ScSbO6 (NSSO) have been prepared in form of polycrystalline powders by a solid state reaction route. The crystal structure and magnetic properties of the compounds were investigated using a combination of X-ray and neutron powder diffraction, electron microscopy, calorimetric and magnetic measurements. The compounds adopt a trigonal structure, space group R3, of the corundum related Ni3TeO6 (NTO) type. Only one of the octahedral Ni positions (Ni(2)) of the NTO structure was found to be occupied by In (Sc). NTO has non-centrosymmetric structure and is ferroelectric below 1000 K, dielectric and second harmonic measurements suggest that also NISO and NSSO are correspondingly ferroelectric. Magnetization measurements signified antiferromagnetic ordering below TN=60 K (NSSO) and 76 K (NISO). The magnetic structure is formed by two antiferromagnetically coupled incommensurate helices with the spiral axis along the b-axis and propagation vector k = [0, ky,0] with ky= 0.036(1) (NSSO) and ky= 0.029(1) (NISO). The observed structural and magnetic properties of NISO and NSSO are discussed and compared with those of NTO.
△ Less
Submitted 1 April, 2013;
originally announced April 2013.
-
Temperature-dependent multi-k magnetic structure in multiferroic Co3TeO6
Authors:
S. A. Ivanov,
R. Tellgren,
C. Ritter,
P. Nordblad,
R. Mathieu,
G. Andre,
N. V. Golubko,
E. D. Politova,
M. Weil
Abstract:
A complex magnetic order of the multiferroic compound Co3TeO6 has been revealed by neutron powder diffraction studies on ceramics and crushed single crystals. The compound adopts a monoclinic structure (s.g. C2/c) in the studied temperature range 2 K - 300 K but exhibits successive antiferromagnetic transitions at low temperature. Incommensurate antiferromagnetic order with the propagation vector…
▽ More
A complex magnetic order of the multiferroic compound Co3TeO6 has been revealed by neutron powder diffraction studies on ceramics and crushed single crystals. The compound adopts a monoclinic structure (s.g. C2/c) in the studied temperature range 2 K - 300 K but exhibits successive antiferromagnetic transitions at low temperature. Incommensurate antiferromagnetic order with the propagation vector k1 = (0, 0.485, 0.055) sets in at 26 K. A transition to a second antiferromagnetic structure with k2 = (0, 0, 0) takes place at 21.1 K. Moreover, a transition to a commensurate antiferromagnetic structure with k3 = (0, 0.5, 0.25) occurs at 17.4 K. The magnetic structures have been determined by neutron powder diffraction using group theory analysis as a preliminary tool. Different coordinations of the Co2+ ions involved in the low-symmetry C2/c structure of Co3TeO6 render the exchange-interaction network very complex by itself. The observed magnetic phase transformations are interpreted as an evidence of competing magnetic interactions. The temperature dependent changes in the magnetic structure, derived from refinements of high-resolution neutron data, are discussed and possible mechanisms connected with the spin reorientations are described.
△ Less
Submitted 31 October, 2011;
originally announced October 2011.
-
Magnetic properties of the low-dimensional spin-1/2 magnet α-Cu_2As_2O_7
Authors:
Y. C. Arango,
E. Vavilova,
M. Abdel-Hafiez,
O. Janson,
A. A. Tsirlin,
H. Rosner,
S. -L. Drechsler,
M. Weil,
G. Nénert,
R. Klingeler,
O. Volkova,
A. Vasiliev,
V. Kataev,
B. Büchner
Abstract:
In this work we study the interplay between the crystal structure and magnetism of the pyroarsenate α-Cu_2As_2O_7 by means of magnetization, heat capacity, electron spin resonance and nuclear magnetic resonance measurements as well as density functional theory (DFT) calculations and quantum Monte Carlo (QMC) simulations. The data reveal that the magnetic Cu-O chains in the crystal structure repres…
▽ More
In this work we study the interplay between the crystal structure and magnetism of the pyroarsenate α-Cu_2As_2O_7 by means of magnetization, heat capacity, electron spin resonance and nuclear magnetic resonance measurements as well as density functional theory (DFT) calculations and quantum Monte Carlo (QMC) simulations. The data reveal that the magnetic Cu-O chains in the crystal structure represent a realization of a quasi-one dimensional (1D) coupled alternating spin-1/2 Heisenberg chain model with relevant pathways through non-magnetic AsO_4 tetrahedra. Owing to residual 3D interactions antiferromagnetic long range ordering at T_N\simeq10K takes place. Application of external magnetic field B along the magnetically easy axis induces the transition to a spin-flop phase at B_{SF}~1.7T (2K). The experimental data suggest that substantial quantum spin fluctuations take place at low magnetic fields in the ordered state. DFT calculations confirm the quasi-one-dimensional nature of the spin lattice, with the leading coupling J_1 within the structural dimers. QMC fits to the magnetic susceptibility evaluate J_1=164K, the weaker intrachain coupling J'_1/J_1 = 0.55, and the effective interchain coupling J_{ic1}/J_1 = 0.20.
△ Less
Submitted 3 October, 2011;
originally announced October 2011.
-
Complex magnetism and magnetic field-driven electrical polarization in Co$_3$TeO$_6$
Authors:
M. Hudl,
R. Mathieu,
S. A. Ivanov,
M. Weil,
V. Carolus,
Th. Lottermoser,
M. Fiebig,
Y. Tokunaga,
Y. Taguchi,
Y. Tokura,
P. Nordblad
Abstract:
The magnetic and electrical properties of Co$_3$TeO$_6$ single-crystals with corundum related structure reveal a magnetic-field induced polarization below 21 K. A sharp peak in the specific heat at \approx 18 K indicates a reconstructive-type first-order phase transition. From second-harmonic generation (SHG) measurements breaking of inversion symmetry is evident and the point-group symmetry was d…
▽ More
The magnetic and electrical properties of Co$_3$TeO$_6$ single-crystals with corundum related structure reveal a magnetic-field induced polarization below 21 K. A sharp peak in the specific heat at \approx 18 K indicates a reconstructive-type first-order phase transition. From second-harmonic generation (SHG) measurements breaking of inversion symmetry is evident and the point-group symmetry was determined as m. The temperature and magnetic-field dependence of the magnetic and electrical polarizations are discussed in the light of the SHG results.
△ Less
Submitted 21 August, 2011;
originally announced August 2011.
-
New type of incommensurate magnetic ordering in Mn3TeO6
Authors:
S. A. Ivanov,
P. Nordblad,
R. Mathieu,
R. Tellgren,
C. Ritter,
N. Golubko,
E. D. Politova,
M. Weil
Abstract:
The complex metal oxide Mn3TeO6 exhibits a corundum related structure and has been prepared both in forms of single crystals by chemical transport reactions and of polycrystalline powders by a solid state reaction route. The crystal structure and magnetic properties have been investigated using a combination of X-ray and neutron powder diffraction, electron microscopy, calorimetric and magnetic me…
▽ More
The complex metal oxide Mn3TeO6 exhibits a corundum related structure and has been prepared both in forms of single crystals by chemical transport reactions and of polycrystalline powders by a solid state reaction route. The crystal structure and magnetic properties have been investigated using a combination of X-ray and neutron powder diffraction, electron microscopy, calorimetric and magnetic measurements. At room temperature this compound adopts a trigonal structure, space group R3 with a = 8.8679(1) Å, c = 10.6727(2) Å. A long-range magnetically ordered state is identified below 23 K. An unexpected feature of this magnetic structure is several types of Mn-chains. Under the action of the incommensurate magnetic propagation vector k = [0, 0, 0.4302(1)] the unique Mn site is split into two magnetically different orbits. One orbit forms a perfect helix with the spiral axis along the c-axis while the other orbit has a sine wave character along the c-axis.
△ Less
Submitted 29 April, 2011;
originally announced April 2011.
-
Cosmological Evolution of Supergiant Star-Forming Clouds
Authors:
Melinda L. Weil,
Ralph E. Pudritz
Abstract:
In an exploration of the birthplaces of globular clusters, we present a careful examination of the formation of self-gravitating gas clouds within assembling dark matter haloes in a hierarchical cosmological model. Our high-resolution smoothed particle hydrodynamical simulations are designed to determine whether or not hypothesized supergiant molecular clouds (SGMCs) form and, if they do, to det…
▽ More
In an exploration of the birthplaces of globular clusters, we present a careful examination of the formation of self-gravitating gas clouds within assembling dark matter haloes in a hierarchical cosmological model. Our high-resolution smoothed particle hydrodynamical simulations are designed to determine whether or not hypothesized supergiant molecular clouds (SGMCs) form and, if they do, to determine their physical properties and mass spectra. It was suggested in earlier work that clouds with a median mass of several 10^8 M_sun are expected to assemble during the formation of a galaxy, and that globular clusters form within these SGMCs. Our simulations show that clouds with the predicted properties are indeed produced as smaller clouds collide and agglomerate within the merging dark matter haloes of our cosmological model. We find that the mass spectrum of these clouds obeys the same power-law form observed for globular clusters, molecular clouds, and their internal clumps in galaxies, and predicted for the supergiant clouds in which globular clusters may form. We follow the evolution and physical properties of gas clouds within small dark matter haloes up to z = 1, after which prolific star formation is expected to occur. Finally, we discuss how our results may lead to more physically motivated "rules" for star formation in cosmological simulations of galaxy formation.
△ Less
Submitted 15 March, 2001;
originally announced March 2001.
-
A Comparison of Simple Galaxy Mass Estimators
Authors:
Melinda L. Weil
Abstract:
The virial, projected and spherical Jeans equation galaxy mass estimators are compared. High-resolution models of elliptical galaxies from N-body simulations are used to compare predicted mass profiles. Averages over eight models and directions in the three intrinsic projections show that all the mass estimators are comparably poor for r<4 kpc but that, with the exception of the projected mass e…
▽ More
The virial, projected and spherical Jeans equation galaxy mass estimators are compared. High-resolution models of elliptical galaxies from N-body simulations are used to compare predicted mass profiles. Averages over eight models and directions in the three intrinsic projections show that all the mass estimators are comparably poor for r<4 kpc but that, with the exception of the projected mass estimator, errors are within approximately 10 - 20% out to r=40 kpc. Because kinematic data for elliptical galaxies are now available out to several effective radii, mass estimation techniques which are simple to apply can provide mass profiles and mass-to-light ratios at large radii.
△ Less
Submitted 2 November, 1998;
originally announced November 1998.
-
Formation of Disc Galaxies
Authors:
M. L. Weil,
V. R. Eke,
G. Efstathiou
Abstract:
We investigate the influence of the cooling epoch on the formation of galaxies in a cold dark matter dominated universe. Isolated haloes, with circular speeds typical of spiral galaxies, have been selected from a low resolution numerical simulation for re-simulation at higher resolution with dark matter and gas components. The initial conditions are evolved with two smoothed particle hydrodynami…
▽ More
We investigate the influence of the cooling epoch on the formation of galaxies in a cold dark matter dominated universe. Isolated haloes, with circular speeds typical of spiral galaxies, have been selected from a low resolution numerical simulation for re-simulation at higher resolution with dark matter and gas components. The initial conditions are evolved with two smoothed particle hydrodynamics codes, TREESPH and GRAPESPH. In previous SPH simulations, strong outward transport of angular momentum has led to the formation of disc-like systems with much smaller angular momenta than observed in real disc galaxies. Here we investigate whether this problem can be circumvented if feedback processes prevent disc formation until late epochs. The results of varying the cooling epoch for each of five different haloes are analysed. When cooling and star formation occur at early times, stellar discs are destroyed during merger events and we observe similar catastrophic transport of angular momentum as seen in previous work. With cooling suppressed until z=1, discs can form by the present day with angular momenta comparable to those of observed disc galaxies. We conclude that feedback processes, which prevent gas from collapsing until late epochs, are an essential ingredient in disc galaxy formation.
△ Less
Submitted 24 February, 1998;
originally announced February 1998.
-
Diffuse Stellar Light at 100 kpc Scales in M87
Authors:
Melinda L. Weil,
Jonathan Bland-Hawthorn,
David F. Malin
Abstract:
In a new survey of nearby galaxies from stacked photographic images, M87 shows a diffuse fan of stellar material which extends along the projected SE (major) axis out to about 100 kpc at a limiting (B) surface brightness of $28 \hbox{mag arcsec}^{-2}$. We suggest that disruption of a small spheroidal galaxy within a larger potential is the most likely explanation for the diffuse structure. Our s…
▽ More
In a new survey of nearby galaxies from stacked photographic images, M87 shows a diffuse fan of stellar material which extends along the projected SE (major) axis out to about 100 kpc at a limiting (B) surface brightness of $28 \hbox{mag arcsec}^{-2}$. We suggest that disruption of a small spheroidal galaxy within a larger potential is the most likely explanation for the diffuse structure. Our simulations include a rigid primary potential with characteristics similar to those derived for M87 and a populated intruder. The orbit is required to pass close to the center of the potential to produce a fan which nearly aligns with the major axis and has a large opening angle, as seen in M87. The structure of the dark matter at large galactic radii is investigated by representing M87 with different potentials. The morphology and luminosity of the fan and the kinematics of debris in the center of the primary potential are analyzed and compared with substructure in M87. The short lifetimes (t_fan < 5 10^8 years) of the simulated diffuse fans indicate that several accretion events could be hidden in galaxies.
△ Less
Submitted 7 July, 1997;
originally announced July 1997.
-
Global Properties of Multiple Merger Remnants
Authors:
Melinda L. Weil,
Lars Hernquist
Abstract:
Merger remnants of small groups of galaxies are contrasted with relics of mergers of pairs of galaxies to determine which process produces objects that best compare to real ellipticals. In both cases, the progenitors consist of self-gravitating disks, halos, and, sometimes, bulges. Pairs of galaxies merge from orbits that initially have zero--energy. The systems that produce multiple merger remn…
▽ More
Merger remnants of small groups of galaxies are contrasted with relics of mergers of pairs of galaxies to determine which process produces objects that best compare to real ellipticals. In both cases, the progenitors consist of self-gravitating disks, halos, and, sometimes, bulges. Pairs of galaxies merge from orbits that initially have zero--energy. The systems that produce multiple merger remnants are dense, six--member groups in virial equilibrium with low velocity dispersions. Multiple and pair mergers produce remnants which differ in both their spatial and kinematic properties. Multiple merger remnants have small triaxialities and are most likely to appear nearly round from most viewing angles. They possess cores, with sizes of a few tenths of an effective radius, that are more extended than pair remnant cores, even when bulges are included in the progenitors. In multiple mergers, the spin of all components -- halo, disk, and bulge -- increases and, while velocity dispersion dominates in the central regions, $v_r/σ\approx 1$ outside an effective radius in some projections. The angular momentum and minor axis vectors are aligned for multiple merger remnants. During merging of multiple progenitors, about half of the orbital angular momentum in each luminous component is converted into internal rotation in that component. Material is prevented from accumulating in the center of multiple merger remnants as efficiently as it does in pair mergers. In pair mergers that include gas, unrealistically steep surface brightness profiles have been produced in center of the remnants; in multiple mergers the formation of overdense nuclei may be impeded, thus allowing more successful comparison with real elliptical galaxies.
△ Less
Submitted 16 August, 1995;
originally announced August 1995.
