-
Effect of Helium Ion Implantation on 3C-SiC Nanomechanical String Resonators
Authors:
Philipp Bredol,
Felix David,
Nagesh S. Jagtap,
Yannick S. Klaß,
Georgy V. Astakhov,
Artur Erbe,
Eva M. Weig
Abstract:
Hybrid quantum devices enable novel functionalities by combining the benefits of different subsystems. Particularly, point defects in nanomechanical resonators made of diamond or silicon carbide (SiC) have been proposed for precise magnetic field sensing and as versatile quantum transducers. However, the realization of a hybrid system may involve tradeoffs in the performance of the constituent sub…
▽ More
Hybrid quantum devices enable novel functionalities by combining the benefits of different subsystems. Particularly, point defects in nanomechanical resonators made of diamond or silicon carbide (SiC) have been proposed for precise magnetic field sensing and as versatile quantum transducers. However, the realization of a hybrid system may involve tradeoffs in the performance of the constituent subsystems. In a spin-mechanical system, the mechanical properties of the resonator may suffer from the presence of engineered defects in the crystal lattice. This may severely restrict the performance of the resulting device and needs to be carefully explored. Here, we focus on the impact of defects on high Q nanomechanical string resonators made of pre-stressed 3C-SiC grown on Si(111). We use helium ion implantation to create point defects and study their accumulated effect on the mechanical performance. Using Euler-Bernoulli beam theory, we present a method to determine Young's modulus and the pre-stress of the strings. We find that Young's modulus is not modified by implantation. Under implantation doses relevant for single defect or defect ensemble generation, both tensile stress and dam** rate also remain unaltered. For higher implantation dose, both exhibit a characteristic change.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Shape Optimization of Geometrically Nonlinear Modal Coupling Coefficients: An Application to MEMS Gyroscopes
Authors:
Daniel Schiwietz,
Marian Hörsting,
Eva Maria Weig,
Matthias Wenzel,
Peter Degenfeld-Schonburg
Abstract:
Micro- and nanoelectromechanical system (MEMS and NEMS) resonators can exhibit rich nonlinear dynamics as they are often operated at large amplitudes with high quality factors and possess a high mode density with a variety of nonlinear modal couplings. Their impact is strongly influenced by internal resonance conditions and by the strength of the modal coupling coefficients. On one hand, strong no…
▽ More
Micro- and nanoelectromechanical system (MEMS and NEMS) resonators can exhibit rich nonlinear dynamics as they are often operated at large amplitudes with high quality factors and possess a high mode density with a variety of nonlinear modal couplings. Their impact is strongly influenced by internal resonance conditions and by the strength of the modal coupling coefficients. On one hand, strong nonlinear couplings are of academic interest and promise novel device concepts. On the other hand, however, they have the potential to disturb the linear system behavior on which industrial devices such as gyroscopes and micro mirrors are based on. In either case, being able to optimize the coupling coefficients by design is certainly beneficial. A main source of nonlinear modal couplings are geometric nonlinearities. In this work, we apply node-based shape optimization to tune the geometrically nonlinear 3-wave coupling coefficients of a MEMS gyroscope. We demonstrate that individual coupling coefficients can be tuned over several orders of magnitude by shape optimization, while satisfying typical constraints on manufacturability and operability of the devices. The optimized designs contain unintuitive geometrical features far away from any solution an experienced human MEMS or NEMS designer could have thought of. Thus, this work demonstrates the power of shape optimization for tailoring the complex nonlinear dynamic properties of MEMS and NEMS resonators.
△ Less
Submitted 26 March, 2024;
originally announced March 2024.
-
Shape Optimization of Eigenfrequencies in MEMS Gyroscopes
Authors:
Daniel Schiwietz,
Marian Hörsting,
Eva Maria Weig,
Peter Degenfeld-Schonburg,
Matthias Wenzel
Abstract:
Microelectromechanical systems (MEMS) gyroscopes are widely used in consumer and automotive applications. They have to fulfill a vast number of product requirements which lead to complex mechanical designs of the resonating structure. Arriving at a final design is a cumbersome process that relies heavily on human experience in conjunction with design optimization methods. In this work, we apply no…
▽ More
Microelectromechanical systems (MEMS) gyroscopes are widely used in consumer and automotive applications. They have to fulfill a vast number of product requirements which lead to complex mechanical designs of the resonating structure. Arriving at a final design is a cumbersome process that relies heavily on human experience in conjunction with design optimization methods. In this work, we apply node-based shape optimization to the design of a MEMS gyroscope. For that purpose, we parametrize the coordinates of the nodes of the finite element method (FEM) mesh that discretize the shapes of the springs. We then implement the gradients of the mechanical eigenfrequencies and typical MEMS manufacturability constraints, with respect to the design parameters, in a FEM code. Using gradient-based optimization we tune the gyroscope's frequency split and shift spurious modes away from the first three multiples of the gyroscope's drive frequency while manufacturability constraints are fulfilled. The resulting optimized design exhibits novel geometrical shapes which defy any human intuition. Overall, we demonstrate that shape optimization can not only solve optimization problems in MEMS design without required human intervention, but also explores geometry solutions which can otherwise not be addressed. In this way, node-based shape optimization opens up a much larger space of possible design solutions, which is crucial for facing the ever increasing product requirements. Our approach is generic and applicable to many other types of MEMS resonators.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
Radiation pressure backaction on a hexagonal boron nitride nanomechanical resonator
Authors:
Irene Sánchez Arribas,
Takashi Taniguchi,
Kenji Watanabe,
Eva M. Weig
Abstract:
Hexagonal boron nitride (hBN) is a van der Waals material with excellent mechanical properties hosting quantum emitters and optically active spin defects, several of them being sensitive to strain. Establishing optomechanical control of hBN will enable hybrid quantum devices that combine the spin degree of freedom with the cavity optomechanical toolbox. In this letter, we report the first observat…
▽ More
Hexagonal boron nitride (hBN) is a van der Waals material with excellent mechanical properties hosting quantum emitters and optically active spin defects, several of them being sensitive to strain. Establishing optomechanical control of hBN will enable hybrid quantum devices that combine the spin degree of freedom with the cavity optomechanical toolbox. In this letter, we report the first observation of radiation pressure backaction at telecom wavelengths with a hBN drum-head mechanical resonator. The thermomechanical motion of the resonator is coupled to the optical mode of a high finesse fiber-based Fabry-Pérot microcavity in a membrane-in-the-middle configuration. We are able to resolve the optical spring effect and optomechanical dam** with a single photon coupling strength of $g_0/2π= 1200$ Hz. Our results pave the way for tailoring the mechanical properties of hBN resonators with light.
△ Less
Submitted 21 July, 2023; v1 submitted 8 February, 2023;
originally announced February 2023.
-
Thermoelastic Dam** in MEMS Gyroscopes at High Frequencies
Authors:
Daniel Schiwietz,
Eva M. Weig,
Peter Degenfeld-Schonburg
Abstract:
Microelectromechanical systems (MEMS) gyroscopes are widely used, e.g. in modern automotive and consumer applications, and require signal stability and accuracy in rather harsh environmental conditions. In many use cases, device reliability must be guaranteed under large external loads at high frequencies. The sensitivity of the sensor to such external loads depends strongly on the dam**, or rat…
▽ More
Microelectromechanical systems (MEMS) gyroscopes are widely used, e.g. in modern automotive and consumer applications, and require signal stability and accuracy in rather harsh environmental conditions. In many use cases, device reliability must be guaranteed under large external loads at high frequencies. The sensitivity of the sensor to such external loads depends strongly on the dam**, or rather quality factor, of the high frequency mechanical modes of the structure. In this paper, we investigate the influence of thermoelastic dam** on several high frequency modes by comparing finite element simulations with measurements of the quality factor in an application-relevant temperature range. We measure the quality factors over different temperatures in vacuum, to extract the relevant thermoelastic material parameters of the polycrystalline MEMS device. Our simulation results show a good agreement with the measured quantities, therefore proving the applicability of our method for predictive purposes in the MEMS design process. Overall, we are able to uniquely identify the thermoelastic effects and show their significance for the dam** of the high frequency modes of an industrial MEMS gyroscope. Our approach is generic and therefore easily applicable to any mechanical structure with many possible applications in nano- and micromechanical systems.
△ Less
Submitted 26 January, 2024; v1 submitted 4 August, 2022;
originally announced August 2022.
-
Frequency comb from a single driven nonlinear nanomechanical mode
Authors:
J. S. Ochs,
D. K. J. Boness,
G. Rastelli,
M. Seitner,
W. Belzig,
M. I. Dykman,
E. M. Weig
Abstract:
Phononic frequency combs have been attracting an increasing attention both as a qualitatively new type of nonlinear phenomena in vibrational systems and from the point of view of applications. It is commonly believed that at least two modes must be involved in generating a comb. In this paper we demonstrate that a comb can be generated by a single nanomechanical mode driven by a resonant monochrom…
▽ More
Phononic frequency combs have been attracting an increasing attention both as a qualitatively new type of nonlinear phenomena in vibrational systems and from the point of view of applications. It is commonly believed that at least two modes must be involved in generating a comb. In this paper we demonstrate that a comb can be generated by a single nanomechanical mode driven by a resonant monochromatic drive. The comb emerges where the drive is still weak, so that the anharmonic part of the mode potential energy remains small. We relate the effect to a negative nonlinear friction induced by the resonant drive, which makes the vibrations at the drive frequency unstable. We directly map the trajectories of the emerging oscillations in the rotating frame and show how these oscillations lead to the frequency comb in the laboratory frame. The results go beyond nanomechanics and suggest a qualitatively new approach to generating tunable frequency combs in single-mode vibrational systems.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
Determining Young's modulus via the eigenmode spectrum of a nanomechanical string resonator
Authors:
Yannick S. Klaß,
Juliane Doster,
Maximilian Bückle,
Rémy Braive,
Eva M. Weig
Abstract:
We present a method for the in-situ determination of Young's modulus of a nanomechanical string resonator subjected to tensile stress. It relies on measuring a large number of harmonic eigenmodes and allows to access Young's modulus even for the case of a stress-dominated frequency response. We use the proposed framework to obtain the Young's modulus of four different wafer materials, comprising t…
▽ More
We present a method for the in-situ determination of Young's modulus of a nanomechanical string resonator subjected to tensile stress. It relies on measuring a large number of harmonic eigenmodes and allows to access Young's modulus even for the case of a stress-dominated frequency response. We use the proposed framework to obtain the Young's modulus of four different wafer materials, comprising the three different material platforms amorphous silicon nitride, crystalline silicon carbide and crystalline indium gallium phosphide. The resulting values are compared with theoretical and literature values where available, revealing the need to measure Young's modulus on the sample material under investigation for precise device characterization.
△ Less
Submitted 29 August, 2022; v1 submitted 18 May, 2022;
originally announced May 2022.
-
Iterative Adaptive Spectroscopy of Short Signals
Authors:
Avishek Chowdhury,
Anh Tuan Le,
Eva M. Weig,
Hugo Ribeiro
Abstract:
We develop an iterative, adaptive frequency sensing protocol based on Ramsey interferometry of a two-level system. Our scheme allows one to estimate unknown frequencies with a high precision from short, finite signals. It avoids several issues related to processing of decaying signals and reduces the experimental overhead related to sampling. High precision is achieved by enhancing the Ramsey sequ…
▽ More
We develop an iterative, adaptive frequency sensing protocol based on Ramsey interferometry of a two-level system. Our scheme allows one to estimate unknown frequencies with a high precision from short, finite signals. It avoids several issues related to processing of decaying signals and reduces the experimental overhead related to sampling. High precision is achieved by enhancing the Ramsey sequence to prepare with high fidelity both the sensing and readout state and by using an iterative procedure built to mitigate systematic errors when estimating frequencies from Fourier transforms.
△ Less
Submitted 10 April, 2022;
originally announced April 2022.
-
Optomechanics for quantum technologies
Authors:
Shabir Barzanjeh,
André Xuereb,
Simon Gröblacher,
Mauro Paternostro,
Cindy A Regal,
Eva Weig
Abstract:
The ability to control the motion of mechanical systems through its interaction with light has opened the door to a plethora of applications in fundamental and applied physics. With experiments routinely reaching the quantum regime, the focus has now turned towards creating and exploiting interesting non-classical states of motion and entanglement in optomechanical systems. Quantumness has also sh…
▽ More
The ability to control the motion of mechanical systems through its interaction with light has opened the door to a plethora of applications in fundamental and applied physics. With experiments routinely reaching the quantum regime, the focus has now turned towards creating and exploiting interesting non-classical states of motion and entanglement in optomechanical systems. Quantumness has also shifted from being the very reason why experiments are constructed to becoming a resource for the investigation of fundamental physics and the creation of quantum technologies. Here, by focusing on opto- and electromechanical platforms we review recent progress in quantum state preparation and entanglement of mechanical systems, together with applications to signal processing and transduction, quantum sensing, topological physics, as well as small-scale thermodynamics.
△ Less
Submitted 29 November, 2021;
originally announced November 2021.
-
Microwave optomechanical measurement of non-metallized SiN strings at mK temperatures
Authors:
Sumit Kumar,
Yannick Klaß,
Baptiste Alperin,
Srisaran Venkatachalam,
Xin Zhou,
Eva Weig,
Eddy Collin,
Andrew Fefferman
Abstract:
The mechanical properties of amorphous materials (glasses) at low temperatures are dominated by effects of low energy excitations that are thought to be atomic-scale tunneling two level systems (TTLS). In nanometer-scale glass samples, the temperature dependence of the sound speed and dissipation is modified relative to that of bulk glass samples. In addition to this size effect, the usual presenc…
▽ More
The mechanical properties of amorphous materials (glasses) at low temperatures are dominated by effects of low energy excitations that are thought to be atomic-scale tunneling two level systems (TTLS). In nanometer-scale glass samples, the temperature dependence of the sound speed and dissipation is modified relative to that of bulk glass samples. In addition to this size effect, the usual presence of a polycrystalline metal in nanomechanical resonators leads to a further departure from the well-studied behavior of insulating bulk glass. We report a dual chip optomechanical measurement technique used to characterize non-metallized amorphous SiN strings at low temperatures. A harp consisting of SiN strings of width 350 nm and lengths 40 to 80 $μ$m is coupled to an Al superconducting microwave cavity on a separate chip. The strings are driven dielectrically and their motion is detected via its modulation of the microwave resonance frequency.
△ Less
Submitted 1 October, 2021;
originally announced October 2021.
-
Observing polarization patterns in the collective motion of nanomechanical arrays
Authors:
Juliane Doster,
Tirth Shah,
Thomas Fösel,
Florian Marquardt,
Eva Weig
Abstract:
In recent years, nanomechanics has evolved into a mature field, with wide-ranging impact from sensing applications to fundamental physics, and it has now reached a stage which enables the fabrication and study of ever more elaborate devices. This has led to the emergence of arrays of coupled nanomechanical resonators as a promising field of research, serving as model systems to study collective dy…
▽ More
In recent years, nanomechanics has evolved into a mature field, with wide-ranging impact from sensing applications to fundamental physics, and it has now reached a stage which enables the fabrication and study of ever more elaborate devices. This has led to the emergence of arrays of coupled nanomechanical resonators as a promising field of research, serving as model systems to study collective dynamical phenomena such as synchronization or topological transport. From a general point of view, the arrays investigated so far represent scalar fields on a lattice. Moving to a scenario where these could be extended to vector fields would unlock a whole host of conceptually interesting additional phenomena, including the physics of polarization patterns in wave fields and their associated topology. Here we introduce a new platform, a two-dimensional array of coupled nanomechanical pillar resonators, whose orthogonal vibration directions encode a mechanical polarization degree of freedom. We demonstrate direct optical imaging of the collective dynamics, enabling us to analyze the emerging polarization patterns and follow their evolution with drive frequency.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Resonant nonlinear response of a nanomechanical system with broken symmetry
Authors:
J. S. Ochs,
G. Rastelli,
M. Seitner,
M. I. Dykman,
E. M. Weig
Abstract:
We study the response of a weakly damped vibrational mode of a nanostring resonator to a moderately strong resonant driving force. Because of the geometry of the experiment, the studied flexural vibrations lack inversion symmetry. As we show, this leads to a nontrivial dependence of the vibration amplitude on the force parameters. For a comparatively weak force, the response has the familiar Duffi…
▽ More
We study the response of a weakly damped vibrational mode of a nanostring resonator to a moderately strong resonant driving force. Because of the geometry of the experiment, the studied flexural vibrations lack inversion symmetry. As we show, this leads to a nontrivial dependence of the vibration amplitude on the force parameters. For a comparatively weak force, the response has the familiar Duffing form, but for a somewhat stronger force, it becomes significantly different. Concurrently there emerge vibrations at twice the drive frequency, a signature of the broken symmetry. Their amplitude and phase allow us to establish the cubic nonlinearity of the potential of the mode as the mechanism responsible for both observations. The developed theory goes beyond the standard rotating-wave approximation. It quantitatively describes the experiment and allows us to determine the nonlinearity parameters.
△ Less
Submitted 31 August, 2021;
originally announced August 2021.
-
Dynamical backaction in an ultrahigh-finesse fiber-based microcavity
Authors:
Felix Rochau,
Irene Sánchez Arribas,
Alexandre Brieussel,
Sebastian Stapfner,
David Hunger,
Eva M. Weig
Abstract:
The use of low-dimensional objects in the field of cavity optomechanics is limited by their low scattering cross section compared to the size of the optical cavity mode. Fiber-based Fabry-Pérot microcavities can feature tiny mode cross sections and still maintain a high finesse, boosting the light-matter interaction and thus enabling the sensitive detection of the displacement of minute objects. H…
▽ More
The use of low-dimensional objects in the field of cavity optomechanics is limited by their low scattering cross section compared to the size of the optical cavity mode. Fiber-based Fabry-Pérot microcavities can feature tiny mode cross sections and still maintain a high finesse, boosting the light-matter interaction and thus enabling the sensitive detection of the displacement of minute objects. Here we present such an ultrasensitive microcavity setup with the highest finesse reported so far in loaded fiber cavities, $\mathcal{F} = 195\,000$. We are able to position-tune the static optomechanical coupling to a silicon nitride membrane stripe, reaching frequency pull parameters of up to $\mathrm{\lvert G/2π\rvert=1}\,\mathrm{GHz\, nm^{-1}}$. We also demonstrate radiation pressure backaction in the regime of an ultrahigh finesse up to $\mathcal{F}=165\,000$.
△ Less
Submitted 19 July, 2021;
originally announced July 2021.
-
Room temperature cavity electromechanics in the sideband-resolved regime
Authors:
Anh Tuan Le,
Alexandre Brieusssel,
Eva Maria Weig
Abstract:
We demonstrate a sideband-resolved cavity electromechanical system operating at room temperature. The mechanical resonator, a strongly pre-stressed silicon nitride string, is dielectrically coupled to a three-dimensional microwave cavity made of copper. The electromechanical coupling is characterized by two measurements, the cavity-induced eigenfrequency shift of the mechanical resonator and the o…
▽ More
We demonstrate a sideband-resolved cavity electromechanical system operating at room temperature. The mechanical resonator, a strongly pre-stressed silicon nitride string, is dielectrically coupled to a three-dimensional microwave cavity made of copper. The electromechanical coupling is characterized by two measurements, the cavity-induced eigenfrequency shift of the mechanical resonator and the optomechanically induced transparency. While the former is dominated by dielectric effects, the latter reveals a clear signature of the dynamical backaction of the cavity field on the resonator. This unlocks the field of cavity electromechanics for room temperature applications.
△ Less
Submitted 9 July, 2021; v1 submitted 10 March, 2021;
originally announced March 2021.
-
Universal length dependence of tensile stress in nanomechanical string resonators
Authors:
Maximilian Bückle,
Yannick S. Klaß,
Felix B. Nägele,
Rémy Braive,
Eva M. Weig
Abstract:
We investigate the tensile stress in freely suspended nanomechanical string resonators, and observe a material-independent dependence on the resonator length. We compare strongly stressed sting resonators fabricated from four different material systems based on amorphous silicon nitride, crystalline silicon carbide as well as crystalline indium gallium phosphide. The tensile stress is found to inc…
▽ More
We investigate the tensile stress in freely suspended nanomechanical string resonators, and observe a material-independent dependence on the resonator length. We compare strongly stressed sting resonators fabricated from four different material systems based on amorphous silicon nitride, crystalline silicon carbide as well as crystalline indium gallium phosphide. The tensile stress is found to increase by approximately 50% for shorter resonators. We establish a simple elastic model to describe the observed length dependence of the tensile stress. The model accurately describes our experimental data. This opens a perspective for stress-engineering the mechanical quality factor of nanomechanical string resonators.
△ Less
Submitted 7 April, 2021; v1 submitted 1 December, 2020;
originally announced December 2020.
-
Amplification and spectral evidence of squeezing in the response of a strongly driven nanoresonator to a probe field
Authors:
J. S. Ochs,
M. Seitner,
M. I. Dykman,
E. M. Weig
Abstract:
Because of their small decay rates, nanomechanical modes enable studying strongly nonlinear phenomena for a moderately strong resonant driving. Here we study the response of a driven resonator to an additional probe field. We experimentally demonstrate resonant amplification and resonant absorption of the probe field. The corresponding spectral peaks lie on the opposite sides of the strong-drive f…
▽ More
Because of their small decay rates, nanomechanical modes enable studying strongly nonlinear phenomena for a moderately strong resonant driving. Here we study the response of a driven resonator to an additional probe field. We experimentally demonstrate resonant amplification and resonant absorption of the probe field. The corresponding spectral peaks lie on the opposite sides of the strong-drive frequency. Even though the fluctuation-dissipation theorem does not apply, we show that the response to the probe field allows us to characterize the squeezing of fluctuations about the stable states of forced oscillations. Our two-tone experiment is done in the classical regime, but our findings should equally apply to quantum fluctuations as well. In quantum terms, the observed response is due to multiphoton processes. The squeezing parameter extracted from the spectra of the response is in excellent agreement with the calculated value with no free parameters.
△ Less
Submitted 8 January, 2021; v1 submitted 30 July, 2020;
originally announced July 2020.
-
Persistent response in ultra-strongly driven mechanical membrane resonators
Authors:
Fan Yang,
Felicitas Hellbach,
Felix Rochau,
Wolfgang Belzig,
Eva M. Weig,
Gianluca Rastelli,
Elke Scheer
Abstract:
We study experimentally and theoretically the phenomenon of persistent response in ultra-strongly driven membrane resonators. This term denotes the development of a vibrating state with nearly constant amplitude over an extreme wide frequency range. We reveal the underlying mechanism of the persistent response state by directly imaging the vibrational state using advanced optical interferometry. W…
▽ More
We study experimentally and theoretically the phenomenon of persistent response in ultra-strongly driven membrane resonators. This term denotes the development of a vibrating state with nearly constant amplitude over an extreme wide frequency range. We reveal the underlying mechanism of the persistent response state by directly imaging the vibrational state using advanced optical interferometry. We argue that the persistent state is related to the nonlinear interaction between higher order flexural modes and higher-order overtones of the driven mode. Finally, we propose a stability diagram for the different vibrational states that the membrane can adopt.
△ Less
Submitted 1 April, 2021; v1 submitted 29 March, 2020;
originally announced March 2020.
-
Spontaneous parametric down-conversion induced by optomechanical gradient forces in nanophotonic waveguides
Authors:
Mohamed Ashour,
Jan Niklas Caspers,
Eva M. Weig,
Peter Degenfeld-Schonburg
Abstract:
Optomechanical gradient forces arise from evanescent fields of guided waves in parallel photonic waveguides. When designed to be of attractive nature, they increase exponentially as the gap between the waveguides decreases. Moreover, the amplitude of the gradient force can be well controlled due to its linear dependence on the input laser power. Here, we propose to exploit the intrinsic nonlinear…
▽ More
Optomechanical gradient forces arise from evanescent fields of guided waves in parallel photonic waveguides. When designed to be of attractive nature, they increase exponentially as the gap between the waveguides decreases. Moreover, the amplitude of the gradient force can be well controlled due to its linear dependence on the input laser power. Here, we propose to exploit the intrinsic nonlinear nature of the optomechanical gradient force to induce a tunable 3-wave coupling between the fundamental modes of two doubly clamped nanophotonic beams. For one of the beams having half the width of the other beam, the 1:2 internal resonance between the fundamental modes supports degenerate spontaneous parametric down-conversion (SPDC). We theoretically explore the main feature of the dissipative phase diagram of the underlying degenerate parametric oscillator model to show that the critical point of the SPDC occurs at parameters which are well in reach of state-of-the-art experiments.
△ Less
Submitted 16 February, 2021; v1 submitted 10 February, 2020;
originally announced February 2020.
-
Tuning the nonlinear dispersive coupling of nanomechanical string resonators
Authors:
K. Gajo,
G. Rastelli,
E. M. Weig
Abstract:
We investigate nonlinear dispersive mode coupling between the flexural in- and out-of-plane modes of two doubly clamped, nanomechanical silicon nitride string resonators. As the amplitude of one mode transitions from the linear response regime into the nonlinear regime, we find a frequency shift of two other modes. The resonators are strongly elastically coupled via a shared clam** point and can…
▽ More
We investigate nonlinear dispersive mode coupling between the flexural in- and out-of-plane modes of two doubly clamped, nanomechanical silicon nitride string resonators. As the amplitude of one mode transitions from the linear response regime into the nonlinear regime, we find a frequency shift of two other modes. The resonators are strongly elastically coupled via a shared clam** point and can be tuned in and out of resonance dielectrically, giving rise to multimode avoided crossings. When the modes start hybridizing, their polarization changes. This affects the nonlinear dispersive coupling in a non-trivial way. We propose a theoretical model to describe the dependence of the dispersive coupling on the mode hybridization.
△ Less
Submitted 13 December, 2019; v1 submitted 4 August, 2019;
originally announced August 2019.
-
Resonantly induced friction in driven nanomechanical systems
Authors:
Mark Dykman,
Gianluca Rastelli,
M. L. Roukes,
Eva M. Weig
Abstract:
We propose a new mechanism of friction in resonantly driven vibrational systems. The form of the friction force follows from the time- and spatial-symmetry arguments. We consider a microscopic mechanism of this resonant force in nanomechanical systems. The friction can be negative, leading to an instability of forced vibrations of a nanoresonator and the onset of self-sustained oscillations in the…
▽ More
We propose a new mechanism of friction in resonantly driven vibrational systems. The form of the friction force follows from the time- and spatial-symmetry arguments. We consider a microscopic mechanism of this resonant force in nanomechanical systems. The friction can be negative, leading to an instability of forced vibrations of a nanoresonator and the onset of self-sustained oscillations in the rotating frame.
△ Less
Submitted 20 March, 2019;
originally announced March 2019.
-
Spectral Evidence of Squeezing of a Weakly Damped Driven Nanomechanical Mode
Authors:
J. S. Huber,
G. Rastelli,
M. J. Seitner,
J. Kölbl,
W. Belzig,
M. I. Dykman,
E. M. Weig
Abstract:
Because of the broken time-translation symmetry, in periodically driven vibrational systems fluctuations of different vibration components have different intensities. Fluctuations of one of the components are often squeezed, whereas fluctuations of the other component, which is shifted in phase by π/2, are increased. Squeezing is a multifaceted phenomenon; it attracts much attention from the persp…
▽ More
Because of the broken time-translation symmetry, in periodically driven vibrational systems fluctuations of different vibration components have different intensities. Fluctuations of one of the components are often squeezed, whereas fluctuations of the other component, which is shifted in phase by π/2, are increased. Squeezing is a multifaceted phenomenon; it attracts much attention from the perspective of high-precision measurements. Here we demonstrate a new and hitherto unappreciated side of squeezing: its direct manifestation in the spectra of driven vibrational systems. With a weakly damped nanomechanical resonator, we study the spectrum of thermal fluctuations of a resonantly driven nonlinear mode. In the attained sideband-resolved regime, we show that the asymmetry of the spectrum directly characterizes the squeezing. This opens a way to deduce squeezing of thermal fluctuations in strongly underdamped resonators, for which a direct determination by a standard homodyne measurement is impeded by frequency fluctuations. The experimental and theoretical results are in excellent agreement. We further extend the theory to also describe the spectral manifestation of squeezing of quantum fluctuations.
△ Less
Submitted 25 June, 2020; v1 submitted 18 March, 2019;
originally announced March 2019.
-
Spatial modulation of nonlinear flexural vibrations of membrane resonators
Authors:
Fan Yang,
Felix Rochau,
Jana Huber,
Alexandre Brieussel,
Gianluca Rastelli,
Eva M. Weig,
Elke Scheer
Abstract:
We study the vibrational motion of membrane resonators upon strong drive in the strongly nonlinear regime. By imaging the vibrational state of rectangular siliconnitride membrane resonators and by analyzing the frequency response using optical interferometry, we show that upon increasing the driving strength, the membrane adopts a peculiar deflection pattern formed by concentric rings superimposed…
▽ More
We study the vibrational motion of membrane resonators upon strong drive in the strongly nonlinear regime. By imaging the vibrational state of rectangular siliconnitride membrane resonators and by analyzing the frequency response using optical interferometry, we show that upon increasing the driving strength, the membrane adopts a peculiar deflection pattern formed by concentric rings superimposed onto the drum head shape of the fundamental mode. Such a circular symmetry cannot be described as a superposition of a small number of excited linear eigenmodes. Furthermore, the different parts of the membrane oscillate at different multiples of the drive frequency, an observation that we denominate as 'localization of overtones'. We introduce a phenomenological model that is based on the coupling of a very small number of effective nonlinear oscillators, representing the different parts of the membrane, and that describes the experimental observations.
△ Less
Submitted 4 February, 2019;
originally announced February 2019.
-
Strong Strain-Induced Coupling between Nanomechanical Pillar Resonators
Authors:
Juliane Doster,
Simon Hoenl,
Heribert Lorenz,
Philipp Paulitschke,
Eva M. Weig
Abstract:
Networks of coupled resonators are an ubiquitous concept in physics, forming the basis of synchronization phenomena, metamaterial formation, nonreciprocal behavior and topological effects. Such systems are typically explored using optical or microwave resonators. In recent years, mechanical resonators have entered the stage as universal building block for resonator networks, both for their well-co…
▽ More
Networks of coupled resonators are an ubiquitous concept in physics, forming the basis of synchronization phenomena, metamaterial formation, nonreciprocal behavior and topological effects. Such systems are typically explored using optical or microwave resonators. In recent years, mechanical resonators have entered the stage as universal building block for resonator networks, both for their well-controlled mechanical properties and for their eigenfrequencies conveniently located in the radio-frequency regime. Vertically oriented nanomechanical pillar resonators are ideally suited for the dense integration into large resonator networks. However, to realize the potential of these promising systems, an intrinsic coupling mechanism needs to be established. Here, we demonstrate strain-induced, strong coupling between two adjacent nanomechanical pillar resonators. The coupling is mediated through the strain distribution in the joint substrate caused by the flexural vibration of the pillars, such that the coupling strength can be controlled by the geometric properties of the nanopillars as well as their separation. Both, mode hybridization and the formation of an avoided level crossing in the response of the nanopillar pair are experimentally observed. The coupling mechanism is readily scalable to large arrays of nanopillars, enabling all-mechanical resonator networks for the investigation of a broad range of collective dynamical phenomena.
△ Less
Submitted 20 December, 2018;
originally announced December 2018.
-
Stress control of tensile-strained In$_{1-x}$Ga$_{x}$P nanomechanical string resonators
Authors:
Maximilian Bückle,
Valentin C. Hauber,
Garrett D. Cole,
Claus Gärtner,
Ute Zeimer,
Jörg Grenzer,
Eva M. Weig
Abstract:
We investigate the mechanical properties of freely suspended nanostrings fabricated from tensile-stressed, crystalline In$_{1-x}$Ga$_{x}$P. The intrinsic strain is a consequence of the epitaxial growth given by the lattice mismatch between the thin film and the substrate which is confirmed by x-ray diffraction measurements. The flexural eigenfrequencies of the nanomechanical string resonators reve…
▽ More
We investigate the mechanical properties of freely suspended nanostrings fabricated from tensile-stressed, crystalline In$_{1-x}$Ga$_{x}$P. The intrinsic strain is a consequence of the epitaxial growth given by the lattice mismatch between the thin film and the substrate which is confirmed by x-ray diffraction measurements. The flexural eigenfrequencies of the nanomechanical string resonators reveal an orientation dependent stress with a maximum value of 650 MPa. The angular dependence is explained by a combination of anisotropic Young's modulus and a change of elastic properties caused by defects. As a function of the crystal orientation a stress variation of up to 50 % is observed. This enables fine tuning of the tensile stress for any given Ga content $x$, which implies interesting prospects for the study of high Q nanomechanical systems.
△ Less
Submitted 15 November, 2018; v1 submitted 29 August, 2018;
originally announced August 2018.
-
Strong 4-mode coupling of nanomechanical string resonators
Authors:
Katrin Gajo,
Simon Schüz,
Eva M. Weig
Abstract:
We investigate mechanical mode coupling between the four fundamental flexural modes of two doubly-clamped, high-Q silicon-nitride nanomechanical string resonators. Strong mechanical coupling between the strings is induced by the strain mediated via a shared clam** point, engineered to increase the exchange of oscillatory energy. One of the resonators is controlled dielectrically, which results i…
▽ More
We investigate mechanical mode coupling between the four fundamental flexural modes of two doubly-clamped, high-Q silicon-nitride nanomechanical string resonators. Strong mechanical coupling between the strings is induced by the strain mediated via a shared clam** point, engineered to increase the exchange of oscillatory energy. One of the resonators is controlled dielectrically, which results in strong coupling between its out-of-plane and in-plane flexural modes. We show both, inter-string out-of-plane-in-plane and 3-mode resonance of the four coupled fundamental vibrational modes of a resonator pair, giving rise to a simple and a multimode avoided crossing, respectively.
△ Less
Submitted 2 October, 2017; v1 submitted 10 July, 2017;
originally announced July 2017.
-
Parametric oscillation, frequency mixing and injection locking of strongly coupled nanomechanical resonator modes
Authors:
Maximilian J. Seitner,
Mehdi Abdi,
Alessandro Ridolfo,
Michael J. Hartmann,
Eva M. Weig
Abstract:
We study locking phenomena of two strongly coupled, high-quality factor nanomechanical resonator modes subject to a common parametric drive at a single drive frequency. By controlled dielectric gradient forces we tune the resonance frequencies of the flexural in-plane and out-of-plane oscillation of the high stress silicon nitride string through their mutual avoided crossing. For the case of the s…
▽ More
We study locking phenomena of two strongly coupled, high-quality factor nanomechanical resonator modes subject to a common parametric drive at a single drive frequency. By controlled dielectric gradient forces we tune the resonance frequencies of the flexural in-plane and out-of-plane oscillation of the high stress silicon nitride string through their mutual avoided crossing. For the case of the strong common parametric drive signal-idler generation via parametric oscillation is observed, analogously to the framework of nonlinear optical effects in an optical parametric oscillator. Frequency tuning of the signal and idler resonances is demonstrated. When the resonance frequencies of signal and idler get closer to each other, partial injection locking, injection pulling and complete injection locking to half of the drive frequency occurs depending on the pump strength. Furthermore, satellite resonances, symmetrically off-set from signal and idler by their beat-note, are observed which can be attributed to degenerate four-wave-mixing in the highly nonlinear mechanical oscillations.
△ Less
Submitted 23 December, 2016;
originally announced December 2016.
-
Finite time Stückelberg interferometry with nanomechanical modes
Authors:
Maximilian J. Seitner,
Hugo Ribeiro,
Johannes Kölbl,
Thomas Faust,
Eva M. Weig
Abstract:
Stückelberg interferometry describes the interference of two strongly coupled modes during a double passage through an avoided energy level crossing. In this work, we experimentally investigate finite time effects in Stückelberg interference and provide an exact analytical solution of the Stückelberg problem. Approximating this solution in distinct limits reveals uncharted parameter regimes of Stü…
▽ More
Stückelberg interferometry describes the interference of two strongly coupled modes during a double passage through an avoided energy level crossing. In this work, we experimentally investigate finite time effects in Stückelberg interference and provide an exact analytical solution of the Stückelberg problem. Approximating this solution in distinct limits reveals uncharted parameter regimes of Stückelberg interferometry. Experimentally, we study these regimes using a purely classical, strongly coupled nanomechanical two-mode system of high quality factor. The classical two-mode system consists of the in-plane and out-of-plane fundamental flexural mode of a high stress silicon nitride string resonator, coupled via electric gradient fields. The dielectric control and microwave cavity enhanced universal transduction of the nanoelectromechanical system allows for the experimental access to all theoretically predicted Stückelberg parameter regimes. We exploit our experimental and theoretical findings by studying the onset of Stückelberg interference in dependence of the characteristic system control parameters and obtain characteristic excitation oscillations between the two modes even without the explicit need of traversing the avoided crossing. The presented theory is not limited to classical mechanical two-mode systems but can be applied to every strongly coupled (quantum) two-level system, for example a spin-1/2 system or superconducting qubit.
△ Less
Submitted 16 September, 2016;
originally announced September 2016.
-
Classical Stückelberg interferometry of a nanomechanical two-mode system at room temperature
Authors:
Maximilian J. Seitner,
Hugo Ribeiro,
Johannes Kölbl,
Thomas Faust,
Jörg P. Kotthaus,
Eva M. Weig
Abstract:
The transition from classical to quantum mechanics has intrigued scientists in the past and remains one of the most fundamental conceptual challenges in state-of-the-art physics. Beyond the quantum mechanical correspondence principle, quantum-classical analogies have attracted considerable interest. In this work, we present classical two-mode interference for a nanomechanical two-mode system, real…
▽ More
The transition from classical to quantum mechanics has intrigued scientists in the past and remains one of the most fundamental conceptual challenges in state-of-the-art physics. Beyond the quantum mechanical correspondence principle, quantum-classical analogies have attracted considerable interest. In this work, we present classical two-mode interference for a nanomechanical two-mode system, realizing classical Stückelberg interferometry. In the past, Stückelberg interferometry has been investigated exclusively in quantum mechanical two-level systems. Here, we experimentally demonstrate a classical analog of Stückelberg interferometry taking advantage of coherent energy exchange between two-strongly coupled, high quality factor nanomechanical resonator modes. Furthermore, we provide an exact theoretical solution for the double passage Stückelberg problem which reveals the analogy of the return probabilities in the quantum mechanical and the classical version of the problem. This result qualifies classical two-mode systems at large as a testbed for quantum mechanical interferometry.
△ Less
Submitted 1 July, 2016; v1 submitted 2 February, 2016;
originally announced February 2016.
-
A universal platform for magnetostriction measurements in thin films
Authors:
Matthias Pernpeintner,
Rasmus B. Holländer,
Maximilian J. Seitner,
Eva M. Weig,
Rudolf Gross,
Sebastian T. B. Goennenwein,
Hans Huebl
Abstract:
We present a universal nanomechanical sensing platform for the investigation of magnetostriction in thin films. It is based on a doubly-clamped silicon nitride nanobeam resonator covered with a thin magnetostrictive film. Changing the magnetization direction within the film plane by an applied magnetic field generates a magnetostrictive stress and thus changes the resonance frequency of the nanobe…
▽ More
We present a universal nanomechanical sensing platform for the investigation of magnetostriction in thin films. It is based on a doubly-clamped silicon nitride nanobeam resonator covered with a thin magnetostrictive film. Changing the magnetization direction within the film plane by an applied magnetic field generates a magnetostrictive stress and thus changes the resonance frequency of the nanobeam. A measurement of the resulting resonance frequency shift, e.g. by optical interferometry, allows to quantitatively determine the magnetostriction constants of the thin film. We use this method to determine the magnetostriction constants of a 10nm thick polycrystalline cobalt film, showing very good agreement with literature values. The presented technique can be useful in particular for the precise measurement of magnetostriction in a variety of (conducting and insulating) thin films, which can be deposited by e.g. electron beam deposition, thermal evaporation or sputtering.
△ Less
Submitted 2 September, 2015;
originally announced September 2015.
-
Dam** of metallized bilayer nanomechanical resonators at room temperature
Authors:
Maximilian J. Seitner,
Katrin Gajo,
Eva M. Weig
Abstract:
We investigate the influence of gold thin-films subsequently deposited on a set of initially bare, doubly clamped, high-stress silicon nitride string resonators at room temperature. Analytical expressions for resonance frequency, quality factor and dam** for both in- and out-of-plane flexural modes of the bilayer system are derived, which allows for the determination of effective elastic paramet…
▽ More
We investigate the influence of gold thin-films subsequently deposited on a set of initially bare, doubly clamped, high-stress silicon nitride string resonators at room temperature. Analytical expressions for resonance frequency, quality factor and dam** for both in- and out-of-plane flexural modes of the bilayer system are derived, which allows for the determination of effective elastic parameters of the composite structure from our experimental data. We find the inverse quality factor to scale linearly with the gold film thickness, indicating that the overall dam** is governed by losses in the metal. Correspondingly, the mechanical linewidth increases by more than one order of magnitude compared to the bare silicon nitride string resonator. Furthermore, we extract mechanical quality factors of the gold film for both flexural modes and show that they can be enhanced by complete deposition of the metal in a single step, suggesting that surface and interface losses play a vital role in metal thin-films.
△ Less
Submitted 19 September, 2014;
originally announced September 2014.
-
Circuit Electromechanics with a Non-Metallized Nanobeam
Authors:
Matthias Pernpeintner,
Thomas Faust,
Fredrik Hocke,
Jörg P. Kotthaus,
Eva M. Weig,
Hans Huebl,
Rudolf Gross
Abstract:
We have realized a nano-electromechanical hybrid system consisting of a silicon nitride beam dielectrically coupled to a superconducting microwave resonator. We characterize the sample by making use of the Duffing nonlinearity of the strongly driven beam. In particular, we calibrate the amplitude spectrum of the mechanical motion and determine the electromechanical vacuum coupling. A high quality…
▽ More
We have realized a nano-electromechanical hybrid system consisting of a silicon nitride beam dielectrically coupled to a superconducting microwave resonator. We characterize the sample by making use of the Duffing nonlinearity of the strongly driven beam. In particular, we calibrate the amplitude spectrum of the mechanical motion and determine the electromechanical vacuum coupling. A high quality factor of 480,000 at a resonance frequency of 14 MHz is achieved at 0.5 K. The experimentally determined electromechanical vacuum coupling of 11.5 mHz is quantitatively compared with finite element based model calculations.
△ Less
Submitted 28 July, 2014; v1 submitted 25 July, 2014;
originally announced July 2014.
-
Size-independent Young's modulus of inverted conical GaAs nanowire resonators
Authors:
P. Paulitschke,
N. Seltner,
A. Lebedev,
H. Lorenz,
E. M. Weig
Abstract:
We explore mechanical properties of top down fabricated, singly clamped inverted conical GaAs nanowires. Combining nanowire lengths of 2-9 $μ$m with foot diameters of 36-935 nm yields fundamental flexural eigenmodes spanning two orders of magnitude from 200 kHz to 42 MHz. We extract a size-independent value of Young's modulus of (45$\pm$3) GPa. With foot diameters down to a few tens of nanometers,…
▽ More
We explore mechanical properties of top down fabricated, singly clamped inverted conical GaAs nanowires. Combining nanowire lengths of 2-9 $μ$m with foot diameters of 36-935 nm yields fundamental flexural eigenmodes spanning two orders of magnitude from 200 kHz to 42 MHz. We extract a size-independent value of Young's modulus of (45$\pm$3) GPa. With foot diameters down to a few tens of nanometers, the investigated nanowires are promising candidates for ultra-flexible and ultra-sensitive nanomechanical devices.
△ Less
Submitted 16 January, 2014;
originally announced January 2014.
-
Signatures of two-level defects in the temperature-dependent dam** of nanomechanical silicon nitride resonators
Authors:
Thomas Faust,
Johannes Rieger,
Maximilian J. Seitner,
Jörg P. Kotthaus,
Eva M. Weig
Abstract:
The dam** rates of high quality factor nanomechanical resonators are well beyond intrinsic limits. Here, we explore the underlying microscopic loss mechanisms by investigating the temperature-dependent dam** of the fundamental and third harmonic transverse flexural mode of a doubly clamped silicon nitride string. It exhibits characteristic maxima reminiscent of two-level defects typical for am…
▽ More
The dam** rates of high quality factor nanomechanical resonators are well beyond intrinsic limits. Here, we explore the underlying microscopic loss mechanisms by investigating the temperature-dependent dam** of the fundamental and third harmonic transverse flexural mode of a doubly clamped silicon nitride string. It exhibits characteristic maxima reminiscent of two-level defects typical for amorphous materials. Coupling to those defects relaxes the momentum selection rules, allowing energy transfer from discrete long wavelength resonator modes to the high frequency phonon environment.
△ Less
Submitted 14 October, 2013;
originally announced October 2013.
-
Exploiting the nonlinear impact dynamics of a single-electron shuttle for highly regular current transport
Authors:
Michael J. Moeckel,
Darren R. Southworth,
Eva M. Weig,
Florian Marquardt
Abstract:
The nanomechanical single-electron shuttle is a resonant system in which a suspended metallic island oscillates between and impacts at two electrodes. This setup holds promise for one-by-one electron transport and the establishment of an absolute current standard. While the charge transported per oscillation by the nanoscale island will be quantized in the Coulomb blockade regime, the frequency of…
▽ More
The nanomechanical single-electron shuttle is a resonant system in which a suspended metallic island oscillates between and impacts at two electrodes. This setup holds promise for one-by-one electron transport and the establishment of an absolute current standard. While the charge transported per oscillation by the nanoscale island will be quantized in the Coulomb blockade regime, the frequency of such a shuttle depends sensitively on many parameters, leading to drift and noise. Instead of considering the nonlinearities introduced by the impact events as a nuisance, here we propose to exploit the resulting nonlinear dynamics to realize a highly precise oscillation frequency via synchronization of the shuttle self-oscillations to an external signal.
△ Less
Submitted 20 February, 2013;
originally announced February 2013.
-
Coherent control of a nanomechanical two-level system
Authors:
Thomas Faust,
Johannes Rieger,
Maximilian J. Seitner,
Jörg P. Kotthaus,
Eva M. Weig
Abstract:
The Bloch sphere is a generic picture describing a coupled two-level system and the coherent dynamics of its superposition states under control of electromagnetic fields. It is commonly employed to visualise a broad variety of phenomena ranging from spin ensembles and atoms to quantum dots and superconducting circuits. The underlying Bloch equations describe the state evolution of the two-level sy…
▽ More
The Bloch sphere is a generic picture describing a coupled two-level system and the coherent dynamics of its superposition states under control of electromagnetic fields. It is commonly employed to visualise a broad variety of phenomena ranging from spin ensembles and atoms to quantum dots and superconducting circuits. The underlying Bloch equations describe the state evolution of the two-level system and allow characterising both energy and phase relaxation processes in a simple yet powerful manner.
Here we demonstrate the realisation of a nanomechanical two-level system which is driven by radio frequency signals. It allows to extend the above Bloch sphere formalism to nanoelectromechanical systems. Our realisation is based on the two orthogonal fundamental flexural modes of a high quality factor nanostring resonator which are strongly coupled by a dielectric gradient field. Full Bloch sphere control is demonstrated via Rabi, Ramsey and Hahn echo experiments. This allows manipulating the classical superposition state of the coupled modes in amplitude and phase and enables deep insight into the decoherence mechanisms of nanomechanical systems. We have determined the energy relaxation time T1 and phase relaxation times T2 and T2*, and find them all to be equal. This not only indicates that energy relaxation is the dominating source of decoherence, but also demonstrates that reversible dephasing processes are negligible in such collective mechanical modes. We thus conclude that not only T1 but also T2 can be increased by engineering larger mechanical quality factors. After a series of ground-breaking experiments on ground state cooling and non-classical signatures of nanomechanical resonators in recent years, this is of particular interest in the context of quantum information processing.
△ Less
Submitted 13 December, 2012;
originally announced December 2012.
-
Cavity-enhanced optical detection of carbon nanotube Brownian motion
Authors:
S. Stapfner,
L. Ost,
D. Hunger,
E. M. Weig,
J. Reichel,
I. Favero
Abstract:
Optical cavities with small mode volume are well-suited to detect the vibration of sub-wavelength sized objects. Here we employ a fiber-based, high-finesse optical microcavity to detect the Brownian motion of a freely suspended carbon nanotube at room temperature under vacuum. The optical detection resolves deflections of the oscillating tube down to 50pm/Hz^1/2. A full vibrational spectrum of the…
▽ More
Optical cavities with small mode volume are well-suited to detect the vibration of sub-wavelength sized objects. Here we employ a fiber-based, high-finesse optical microcavity to detect the Brownian motion of a freely suspended carbon nanotube at room temperature under vacuum. The optical detection resolves deflections of the oscillating tube down to 50pm/Hz^1/2. A full vibrational spectrum of the carbon nanotube is obtained and confirmed by characterization of the same device in a scanning electron microscope. Our work successfully extends the principles of high-sensitivity optomechanical detection to molecular scale nanomechanical systems.
△ Less
Submitted 7 November, 2012;
originally announced November 2012.
-
DC voltage-sustained self-oscillation of a nano-mechanical electron shuttle
Authors:
Daniel R. Koenig,
Eva M. Weig
Abstract:
One core challenge of nanoelectromechanical systems (NEMS) is their efficient actuation. A promising concept superseding resonant driving is self-oscillation. Here we demonstrate voltage-sustained self-oscillation of a nanomechanical charge shuttle. Stable transport at 4.2 K is observed for billions of shuttling cycles, giving rise to ohmic current-voltage curves with a sharp dissipation threshold…
▽ More
One core challenge of nanoelectromechanical systems (NEMS) is their efficient actuation. A promising concept superseding resonant driving is self-oscillation. Here we demonstrate voltage-sustained self-oscillation of a nanomechanical charge shuttle. Stable transport at 4.2 K is observed for billions of shuttling cycles, giving rise to ohmic current-voltage curves with a sharp dissipation threshold. With only a few nanowatts of input energy the presented scheme is suitable for operation in the millikelvin regime where Coulomb blockade-controlled single electron shuttling is anticipated.
△ Less
Submitted 18 July, 2012;
originally announced July 2012.
-
Frequency and Q-factor control of nanomechanical resonators
Authors:
Johannes Rieger,
Thomas Faust,
Maximilian J. Seitner,
Jörg P. Kotthaus,
Eva M. Weig
Abstract:
We present an integrated scheme for dielectric drive and read-out of high-Q nanomechanical resonators which enables tuning of both the resonance frequency and quality factor with an applied DC voltage. A simple model for altering these quantities is derived, incorporating the resonator's complex electric polarizability and position in an inhomogeneous electric field, which agrees very well with th…
▽ More
We present an integrated scheme for dielectric drive and read-out of high-Q nanomechanical resonators which enables tuning of both the resonance frequency and quality factor with an applied DC voltage. A simple model for altering these quantities is derived, incorporating the resonator's complex electric polarizability and position in an inhomogeneous electric field, which agrees very well with the experimental findings as well as FEM simulations. By comparing two sample geometries we are able to show that careful electrode design can determine the direction of frequency tuning of flexural in- and out-of-plane modes of a string resonator. Furthermore we demonstrate that the mechanical quality factor can be voltage reduced more than fivefold.
△ Less
Submitted 10 July, 2012;
originally announced July 2012.
-
Non-adiabatic dynamics of two strongly coupled nanomechanical resonator modes
Authors:
Thomas Faust,
Johannes Rieger,
Maximilian J. Seitner,
Peter Krenn,
Jörg P. Kotthaus,
Eva M. Weig
Abstract:
The Landau-Zener transition is a fundamental concept for dynamical quantum systems and has been studied in numerous fields of physics. Here we present a classical mechanical model system exhibiting analogous behaviour using two inversely tuneable, strongly coupled modes of the same nanomechanical beam resonator. In the adiabatic limit, the anticrossing between the two modes is observed and the cou…
▽ More
The Landau-Zener transition is a fundamental concept for dynamical quantum systems and has been studied in numerous fields of physics. Here we present a classical mechanical model system exhibiting analogous behaviour using two inversely tuneable, strongly coupled modes of the same nanomechanical beam resonator. In the adiabatic limit, the anticrossing between the two modes is observed and the coupling strength extracted. Swee** an initialized mode across the coupling region allows map** of the progression from diabatic to adiabatic transitions as a function of the sweep rate.
△ Less
Submitted 4 May, 2012; v1 submitted 19 January, 2012;
originally announced January 2012.
-
Cavity nano-optomechanics: a nanomechanical system in a high finesse optical cavity
Authors:
Sebastian Stapfner,
Ivan Favero,
David Hunger,
Philipp Paulitschke,
Jakob Reichel,
Khaled Karrai,
Eva M. Weig
Abstract:
The coupling of mechanical oscillators with light has seen a recent surge of interest, as recent reviews report.[1, 2] This coupling is enhanced when confining light in an optical cavity where the mechanical oscillator is integrated as back- mirror or movable wall. At the nano-scale, the optomechanical coupling increases further thanks to a smaller optomechanical interaction volume and reduced mas…
▽ More
The coupling of mechanical oscillators with light has seen a recent surge of interest, as recent reviews report.[1, 2] This coupling is enhanced when confining light in an optical cavity where the mechanical oscillator is integrated as back- mirror or movable wall. At the nano-scale, the optomechanical coupling increases further thanks to a smaller optomechanical interaction volume and reduced mass of the mechanical oscillator. In view of realizing such cavity nano- optomechanics experiments, a scheme was proposed where a sub-wavelength sized nanomechanical oscillator is coupled to a high finesse optical microcavity.[3] Here we present such an experiment involving a single nanomechanical rod precisely positioned into the confined mode of a miniature Fabry-Pérot cavity.[4] We describe the employed stabilized cavity set-up and related finesse measurements. We proceed characterizing the nanorod vibration properties using ultrasonic piezo-actuation methods. Using the optical cavity as a transducer of nanomechanical motion, we monitor optically the piezo-driven nanorod vibration. On top of extending cavity quantum electrodynamics concepts to nanomechanical systems, cavity nano-optomechanics should advance into precision displacement measurements near the standard quantum limit [5], investigation of mechanical systems in their quantum regime, non-linear dynamics [6] and sensing applications.
△ Less
Submitted 28 October, 2011;
originally announced October 2011.
-
Microwave cavity-enhanced transduction for plug and play nanomechanics at room temperature
Authors:
Thomas Faust,
Peter Krenn,
Stephan Manus,
Jörg P. Kotthaus,
Eva M. Weig
Abstract:
Nanomechanical resonators with increasingly high quality factors are enabled following recent insights into energy storage and loss mechanisms in nanoelectromechanical systems (NEMS). Consequently, efficient, non-dissipative transduction schemes are required to avoid the dominating influence of coupling losses. We present an integrated NEMS transducer based on a microwave cavity dielectrically cou…
▽ More
Nanomechanical resonators with increasingly high quality factors are enabled following recent insights into energy storage and loss mechanisms in nanoelectromechanical systems (NEMS). Consequently, efficient, non-dissipative transduction schemes are required to avoid the dominating influence of coupling losses. We present an integrated NEMS transducer based on a microwave cavity dielectrically coupled to an array of doubly-clamped pre-stressed silicon nitride beam resonators. This cavity-enhanced detection scheme allows resolving the resonators' Brownian motion at room temperature while preserving their high mechanical quality factor of 290,000 at 6.6 MHz. Furthermore, our approach constitutes an "opto"mechanical system in which backaction effects of the microwave field are employed to alter the effective dam** of the resonators. In particular, cavity-pumped self-oscillation yields a linewidth of only 5 Hz. Thereby, an adjustement-free, all-integrated and self-driven nanoelectromechanical resonator array interfaced by just two microwave connectors is realised, potentially useful for applications in sensing and signal processing.
△ Less
Submitted 27 December, 2011; v1 submitted 6 September, 2011;
originally announced September 2011.
-
Measuring nanomechanical motion with an imprecision far below the standard quantum limit
Authors:
G. Anetsberger,
E. Gavartin,
O. Arcizet,
Q. P. Unterreithmeier,
E. M. Weig,
M. L. Gorodetsky,
J. P. Kotthaus,
T. J. Kippenberg
Abstract:
We demonstrate a transducer of nanomechanical motion based on cavity enhanced optical near-fields capable of achieving a shot-noise limited imprecision more than 10 dB below the standard quantum limit (SQL). Residual background due to fundamental thermodynamical frequency fluctuations allows a total imprecision 3 dB below the SQL at room temperature (corresponding to 600 am/Hz^(1/2) in absolute un…
▽ More
We demonstrate a transducer of nanomechanical motion based on cavity enhanced optical near-fields capable of achieving a shot-noise limited imprecision more than 10 dB below the standard quantum limit (SQL). Residual background due to fundamental thermodynamical frequency fluctuations allows a total imprecision 3 dB below the SQL at room temperature (corresponding to 600 am/Hz^(1/2) in absolute units) and is known to reduce to negligible values for moderate cryogenic temperatures. The transducer operates deeply in the quantum backaction dominated regime, prerequisite for exploring quantum backaction, measurement-induced squeezing and accessing sub-SQL sensitivity using backaction evading techniques.
△ Less
Submitted 19 March, 2010;
originally announced March 2010.
-
Near-field cavity optomechanics with nanomechanical oscillators
Authors:
G. Anetsberger,
O. Arcizet,
Q. P. Unterreithmeier,
R. Rivière,
A. Schliesser,
E. M. Weig,
J. P. Kotthaus,
T. J. Kippenberg
Abstract:
Cavity-enhanced radiation pressure coupling between optical and mechanical degrees of freedom allows quantum-limited position measurements and gives rise to dynamical backaction enabling amplification and cooling of mechanical motion. Here we demonstrate purely dispersive coupling of high Q nanomechanical oscillators to an ultra-high finesse optical microresonator via its evanescent field, exten…
▽ More
Cavity-enhanced radiation pressure coupling between optical and mechanical degrees of freedom allows quantum-limited position measurements and gives rise to dynamical backaction enabling amplification and cooling of mechanical motion. Here we demonstrate purely dispersive coupling of high Q nanomechanical oscillators to an ultra-high finesse optical microresonator via its evanescent field, extending cavity optomechanics to nanomechanical oscillators. Dynamical backaction mediated by the optical dipole force is observed, leading to laser-like coherent nanomechanical oscillations solely due to radiation pressure. Moreover, sub-fm/Hz^(1/2) displacement sensitivity is achieved, with a measurement imprecision equal to the standard quantum limit (SQL), which coincides with the nanomechanical oscillator's zero-point fluctuations. The achievement of an imprecision at the SQL and radiation-pressure dynamical backaction for nanomechanical oscillators may have implications not only for detecting quantum phenomena in mechanical systems, but also for a variety of other precision experiments. Owing to the flexibility of the near-field coupling approach, it can be readily extended to a diverse set of nanomechanical oscillators and particularly provides a route to experiments where radiation pressure quantum backaction dominates at room temperature, enabling ponderomotive squeezing or QND measurements.
△ Less
Submitted 7 September, 2009; v1 submitted 26 April, 2009;
originally announced April 2009.
-
Fluctuating nanomechanical systems in a high finesse optical microcavity
Authors:
I. Favero,
S. Stapfner,
D. Hunger,
P. Paulitschke,
J. Reichel,
H. Lorenz,
E. M. Weig,
K. Karrai
Abstract:
Confining a laser field between two high reflectivity mirrors of a high-finesse cavity can increase the probability of a given cavity photon to be scattered by an atom traversing the confined photon mode. This enhanced coupling between light and atoms is successfully employed in cavity quantum electrodynamics experiments and led to a very prolific research in quantum optics. The idea of extendin…
▽ More
Confining a laser field between two high reflectivity mirrors of a high-finesse cavity can increase the probability of a given cavity photon to be scattered by an atom traversing the confined photon mode. This enhanced coupling between light and atoms is successfully employed in cavity quantum electrodynamics experiments and led to a very prolific research in quantum optics. The idea of extending such experiments to sub-wavelength sized nanomechanical systems has been recently proposed in the context of optical cavity cooling. Here we present an experiment involving a single nanorod consisting of about 10^9 atoms precisely positioned to plunge into the confined mode of a miniature high finesse Fabry-Perot cavity. We show that the optical transmission of the cavity is affected not only by the static position of the nanorod but also by its vibrational fluctuation. While an imprint of the vibration dynamics is directly detected in the optical transmission, back-action of the light field is also anticipated to quench the nanorod Brownian motion. This experiment shows the first step towards optical cavity controlled dynamics of mechanical nanostructures and opens up new perspectives for sensing and manipulation of optomechanical nanosystems.
△ Less
Submitted 14 April, 2009;
originally announced April 2009.
-
Microwave Dielectric Loss at Single Photon Energies and milliKelvin Temperatures
Authors:
Aaron D. O'Connell,
M. Ansmann,
R. C. Bialczak,
M. Hofheinz,
N. Katz,
Erik Lucero,
C. McKenney,
M. Neeley,
H. Wang,
E. M. Weig,
A. N. Cleland,
J. M. Martinis
Abstract:
The microwave performance of amorphous dielectric materials at very low temperatures and very low excitation strengths displays significant excess loss. Here, we present the loss tangents of some common amorphous and crystalline dielectrics, measured at low temperatures (T < 100 mK) with near single-photon excitation energies, using both coplanar waveguide (CPW) and lumped LC resonators. The los…
▽ More
The microwave performance of amorphous dielectric materials at very low temperatures and very low excitation strengths displays significant excess loss. Here, we present the loss tangents of some common amorphous and crystalline dielectrics, measured at low temperatures (T < 100 mK) with near single-photon excitation energies, using both coplanar waveguide (CPW) and lumped LC resonators. The loss can be understood using a two-level state (TLS) defect model. A circuit analysis of the half-wavelength resonators we used is outlined, and the energy dissipation of such a resonator on a multilayered dielectric substrate is considered theoretically.
△ Less
Submitted 17 February, 2008;
originally announced February 2008.
-
State tomography of capacitively shunted phase qubits with high fidelity
Authors:
Matthias Steffen,
M. Ansmann,
R. McDermott,
N. Katz,
Radoslaw C. Bialczak,
Erik Lucero,
Matthew Neeley,
E. M. Weig,
A. N. Cleland,
John M. Martinis
Abstract:
We introduce a new design concept for superconducting quantum bits (qubits) in which we explicitly separate the capacitive element from the Josephson tunnel junction for improved qubit performance. The number of two-level systems (TLS) that couple to the qubit is thereby reduced by an order of magnitude and the measurement fidelity improves to 90%. This improved design enables the first demonstr…
▽ More
We introduce a new design concept for superconducting quantum bits (qubits) in which we explicitly separate the capacitive element from the Josephson tunnel junction for improved qubit performance. The number of two-level systems (TLS) that couple to the qubit is thereby reduced by an order of magnitude and the measurement fidelity improves to 90%. This improved design enables the first demonstration of quantum state tomography with superconducting qubits using single shot measurements.
△ Less
Submitted 17 February, 2006;
originally announced February 2006.
-
Single electron-phonon interaction in a suspended quantum dot phonon cavity
Authors:
E. M. Höhberger,
R. H. Blick,
T. Brandes,
J. Kirschbaum,
W. Wegscheider,
M. Bichler,
J. P. Kotthaus
Abstract:
An electron-phonon cavity consisting of a quantum dot embedded in a free-standing GaAs/AlGaAs membrane is characterized in Coulomb blockade measurements at low temperatures. We find a complete suppression of single electron tunneling around zero bias leading to the formation of an energy gap in the transport spectrum. The observed effect is induced by the excitation of a localized phonon mode co…
▽ More
An electron-phonon cavity consisting of a quantum dot embedded in a free-standing GaAs/AlGaAs membrane is characterized in Coulomb blockade measurements at low temperatures. We find a complete suppression of single electron tunneling around zero bias leading to the formation of an energy gap in the transport spectrum. The observed effect is induced by the excitation of a localized phonon mode confined in the cavity. This phonon blockade of transport is lifted at magnetic fields where higher electronic states with nonzero angular momentum are brought into resonance with the phonon energy.
△ Less
Submitted 6 April, 2003;
originally announced April 2003.