-
The role of excitation vector fields and all-polarisation state control of cavity magnonics
Authors:
Alban Joseph,
Jayakrishnan M. P. Nair,
Mawgan A. Smith,
Rory Holland,
Luke J. McLellan,
Isabella Boventer,
Tim Wolz,
Dmytro A. Bozhko,
Benedetta Flebus,
Martin P. Weides,
Rair Macedo
Abstract:
Recently the field of cavity magnonics, a field focused on controlling the interaction between magnons and confined microwave photons within microwave resonators, has drawn significant attention as it offers a platform for enabling advancements in quantum- and spin-based technologies. Here, we introduce excitation vector fields, whose polarisation and profile can be easily tuned in a two-port cavi…
▽ More
Recently the field of cavity magnonics, a field focused on controlling the interaction between magnons and confined microwave photons within microwave resonators, has drawn significant attention as it offers a platform for enabling advancements in quantum- and spin-based technologies. Here, we introduce excitation vector fields, whose polarisation and profile can be easily tuned in a two-port cavity setup, thus acting as an effective experimental knob to explore the coupled dynamics of cavity magnon-polaritons. Moreover, we develop theoretical models that accurately predict and reproduce the experimental results for any polarisation state and field profile within the cavity resonator. This versatile experimental platform offers a new avenue for controlling spin-photon interactions and as such also delivering a mechanism to readily control the exchange of information between hybrid systems.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Characterizing Niobium Nitride Superconducting Microwave Coplanar Waveguide Resonator Array for Circuit Quantum Electrodynamics in Extreme Conditions
Authors:
Paniz Foshat,
Paul Baity,
Sergey Danilin,
Valentino Seferai,
Shima Poorgholam-Khanjari,
Hua Feng,
Oleg A. Mukhanov,
Matthew Hutchings,
Robert H. Hadfield,
Muhammad Imran,
Martin Weides,
Kaveh Delfanazari
Abstract:
The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material candidate for applications in superconducting quantum technology. However, NbN-based devices and circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplana…
▽ More
The high critical magnetic field and relatively high critical temperature of niobium nitride (NbN) make it a promising material candidate for applications in superconducting quantum technology. However, NbN-based devices and circuits are sensitive to decoherence sources such as two-level system (TLS) defects. Here, we numerically and experimentally investigate NbN superconducting microwave coplanar waveguide resonator arrays, with a 100 nm thickness, capacitively coupled to a common coplanar waveguide on a silicon chip. We observe that the resonators' internal quality factor (Qi) decreases from Qi ~ 1.07*10^6 in a high power regime (< nph > = 27000) to Qi ~ 1.36 *10^5 in single photon regime at temperature T = 100 mK. Data from this study is consistent with the TLS theory, which describes the TLS interactions in resonator substrates and interfaces. Moreover, we study the temperature dependence internal quality factor and frequency tuning of the coplanar waveguide resonators to characterise the quasiparticle density of NbN. We observe that the increase in kinetic inductance at higher temperatures is the main reason for the frequency shift. Finally, we measure the resonators' resonance frequency and internal quality factor at single photon regime in response to in-plane magnetic fields B||. We verify that Qi stays well above 10^4 up to B|| = 240 mT in the photon number < nph > = 1.8 at T = 100 mK. Our results may pave the way for realising robust microwave superconducting circuits for circuit quantum electrodynamics (cQED) at high magnetic fields necessary for fault-tolerant quantum computing, and ultrasensitive quantum sensing.
△ Less
Submitted 4 June, 2023;
originally announced June 2023.
-
Circle fit optimization for resonator quality factor measurements: point redistribution for maximal accuracy
Authors:
Paul G. Baity,
Connor Maclean,
Valentino Seferai,
Joe Bronstein,
Yi Shu,
Tania Hemakumara,
Martin Weides
Abstract:
The control of material loss mechanisms is playing an increasingly important role for improving coherence times of superconducting quantum devices. Such material losses can be characterized through the measurement of planar superconducting resonators, which reflect losses through the resonance's quality factor $Q_l$. The resonance quality factor consists of both internal (material) losses as well…
▽ More
The control of material loss mechanisms is playing an increasingly important role for improving coherence times of superconducting quantum devices. Such material losses can be characterized through the measurement of planar superconducting resonators, which reflect losses through the resonance's quality factor $Q_l$. The resonance quality factor consists of both internal (material) losses as well as coupling losses when resonance photons escape back into the measurement circuit. The combined losses are then described as $Q_l^{-1} = \mathrm{Re}\{Q_c^{-1}\} + Q_i^{-1}$, where $Q_c$ and $Q_i$ reflect the coupling and internal quality factors of the resonator, respectively. To separate the relative contributions of $Q_i$ and $Q_c$ to $Q_l$, diameter-correcting circle fits use algebraic or geometric means to fit the resonance signal on the complex plane. However, such circle fits can produce varied results, so to address this issue, we use a combination of simulation and experiment to determine the reliability of a fitting algorithm across a wide range of quality factor values from $Q_i\ll Q_c$ to $Q_c\ll Q_i$. In addition, we develop a novel measurement protocol that can not only reduce fitting errors by factors $\gtrsim 2$ but also mitigates the influence of the measurement background on the fit results. This technique can be generalized for other resonance systems beyond superconducting resonators.
△ Less
Submitted 24 November, 2023; v1 submitted 16 January, 2023;
originally announced January 2023.
-
Quantum emulation of the transient dynamics in the multistate Landau-Zener model
Authors:
Alexander Stehli,
Jan David Brehm,
Tim Wolz,
Andre Schneider,
Hannes Rotzinger,
Martin Weides,
Alexey V. Ustinov
Abstract:
Quantum simulation is one of the most promising near term applications of quantum computing. Especially, systems with a large Hilbert space are hard to solve for classical computers and thus ideal targets for a simulation with quantum hardware. In this work, we study experimentally the transient dynamics in the multistate Landau-Zener model as a function of the Landau-Zener velocity. The underlyin…
▽ More
Quantum simulation is one of the most promising near term applications of quantum computing. Especially, systems with a large Hilbert space are hard to solve for classical computers and thus ideal targets for a simulation with quantum hardware. In this work, we study experimentally the transient dynamics in the multistate Landau-Zener model as a function of the Landau-Zener velocity. The underlying Hamiltonian is emulated by superconducting quantum circuit, where a tunable transmon qubit is coupled to a bosonic mode ensemble comprising four lumped element microwave resonators. We investigate the model for different initial states: Due to our circuit design, we are not limited to merely exciting the qubit, but can also pump the harmonic modes via a dedicated drive line. Here, the nature of the transient dynamics depends on the average photon number in the excited resonator. The greater effective coupling strength between qubit and higher Fock states results in a quasi-adiabatic transition, where coherent quantum oscillations are suppressed without the introduction of additional loss channels. Our experiments pave the way for more complex simulations with qubits coupled to an engineered bosonic mode spectrum.
△ Less
Submitted 26 November, 2022;
originally announced November 2022.
-
Quantum sensing with tunable superconducting qubits: optimization and speed-up
Authors:
Sergey Danilin,
Nicholas Nugent,
Martin Weides
Abstract:
Sensing and metrology play an important role in fundamental science and applications by fulfilling the ever-present need for more precise data sets and by allowing researchers to make more reliable conclusions on the validity of theoretical models. Sensors are ubiquitous. They are used in applications across a diverse range of fields including gravity imaging, geology, navigation, security, timeke…
▽ More
Sensing and metrology play an important role in fundamental science and applications by fulfilling the ever-present need for more precise data sets and by allowing researchers to make more reliable conclusions on the validity of theoretical models. Sensors are ubiquitous. They are used in applications across a diverse range of fields including gravity imaging, geology, navigation, security, timekee**, spectroscopy, chemistry, magnetometry, healthcare, and medicine. Current progress in quantum technologies has inevitably triggered the exploration of the use of quantum systems as sensors with new and improved capabilities. This article describes the optimization of the quantum-enhanced sensing of external magnetic fluxes with a Kitaev phase estimation algorithm based on a sensor with tunable transmon qubits. It provides the optimal flux biasing point for sensors with different maximal qubit transition frequencies. An estimation of decoherence rates is made for a given design. The use of $2-$ and $3-$qubit entangled states for sensing are compared in simulation with the single qubit case. The flux sensing accuracy reaches $10^{-8}\cdotΦ_0$ and scales with time as $\sim\ 1/t$ which proves the speed-up of sensing with high ultimate accuracy.
△ Less
Submitted 4 March, 2024; v1 submitted 15 November, 2022;
originally announced November 2022.
-
Antiferromagnetic cavity magnon polaritons in collinear and canted phases of hematite
Authors:
I. Boventer,
H. T. Simensen,
B. Brekke,
M. Weides,
A. Anane,
M. Klaui,
A. Brataas,
R. Lebrun
Abstract:
Cavity spintronics explores light matter interactions at the interface between spintronic and quantum phenomena. Until now, studies have focused on the hybridization between ferromagnets and cavity photons.In this article, we realize antiferromagnetic cavity-magnon polaritons. The collective spin motion in single hematite crystals (α-Fe2O3) hybridizes with 18 - 45 GHz microwave cavity photons with…
▽ More
Cavity spintronics explores light matter interactions at the interface between spintronic and quantum phenomena. Until now, studies have focused on the hybridization between ferromagnets and cavity photons.In this article, we realize antiferromagnetic cavity-magnon polaritons. The collective spin motion in single hematite crystals (α-Fe2O3) hybridizes with 18 - 45 GHz microwave cavity photons with required specific symmetries. We show theoretically and experimentally that the photon-magnon coupling in the collinear phase is mediated by the dynamical Neel vector and the weak magnetic moment in the canted phase by measuring across the Morin transition. The coupling strength g is shown to scale with the anisotropy field in the collinear phase and with the Dzyaloshinskii-Moriya field in the canted phase. We achieve a strong coupling regime both in canted (C > 25 at 300 K) and noncolinear phases (C > 4 at 150 K) and thus coherent information exchange with antiferromagnets These results evidence a generic strategy to achieve cavity-magnon polaritons in antiferromagnets for different symmetries, opening the field of cavity spintronics to antiferromagnetic materials.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
Roadmap on Spin-Wave Computing
Authors:
A. V. Chumak,
P. Kabos,
M. Wu,
C. Abert,
C. Adelmann,
A. Adeyeye,
J. Åkerman,
F. G. Aliev,
A. Anane,
A. Awad,
C. H. Back,
A. Barman,
G. E. W. Bauer,
M. Becherer,
E. N. Beginin,
V. A. S. V. Bittencourt,
Y. M. Blanter,
P. Bortolotti,
I. Boventer,
D. A. Bozhko,
S. A. Bunyaev,
J. J. Carmiggelt,
R. R. Cheenikundil,
F. Ciubotaru,
S. Cotofana
, et al. (91 additional authors not shown)
Abstract:
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the…
▽ More
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the academic domain, the scientific and technological challenges of the field are being extensively investigated, and many proof-of-concept prototypes have already been realized in laboratories. This roadmap is a product of the collective work of many authors that covers versatile spin-wave computing approaches, conceptual building blocks, and underlying physical phenomena. In particular, the roadmap discusses the computation operations with Boolean digital data, unconventional approaches like neuromorphic computing, and the progress towards magnon-based quantum computing. The article is organized as a collection of sub-sections grouped into seven large thematic sections. Each sub-section is prepared by one or a group of authors and concludes with a brief description of the current challenges and the outlook of the further development of the research directions.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Engineering the microwave to infrared noise photon flux for superconducting quantum systems
Authors:
Sergey Danilin,
João Barbosa,
Michael Farage,
Zimo Zhao,
Xiaobang Shang,
Jonathan Burnett,
Nick Ridler,
Chong Li,
Martin Weides
Abstract:
Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies -- beyond the pair-breaking energies -- cause decoherence…
▽ More
Electromagnetic filtering is essential for the coherent control, operation and readout of superconducting quantum circuits at milliKelvin temperatures. The suppression of spurious modes around transition frequencies of a few GHz is well understood and mainly achieved by on-chip and package considerations. Noise photons of higher frequencies -- beyond the pair-breaking energies -- cause decoherence and require spectral engineering before reaching the packaged quantum chip. The external wires that pass into the refrigerator and go down to the quantum circuit provide a direct path for these photons. This article contains quantitative analysis and experimental data for the noise photon flux through coaxial, filtered wiring. The attenuation of the coaxial cable at room temperature and the noise photon flux estimates for typical wiring configurations are provided. Compact cryogenic microwave low-pass filters with CR-110 and Esorb-230 absorptive dielectric fillings are presented along with experimental data at room and cryogenic temperatures up to 70 GHz. Filter cut-off frequencies between 1 to 10 GHz are set by the filter length, and the roll-off is material dependent. The relative dielectric permittivity and magnetic permeability for the Esorb-230 material in the pair-breaking frequency range of 75 to 110 GHz are measured, and the filter properties in this frequency range are calculated. The estimated dramatic suppression of the noise photon flux due to the filter proves its usefulness for experiments with superconducting quantum systems.
△ Less
Submitted 19 January, 2022; v1 submitted 20 July, 2021;
originally announced July 2021.
-
Frequency fluctuations of ferromagnetic resonances at milliKelvin temperatures
Authors:
Tim Wolz,
Luke McLellan,
Alexander Stehli,
Andre Schneider,
Jan David Brehm,
Hannes Rotzinger,
Alexey V. Ustinov,
Martin Weides
Abstract:
Unwanted fluctuations over time, in short, noise, are detrimental to device performance, especially for quantum coherent circuits. Recent efforts have demonstrated routes to utilizing magnon systems for quantum technologies, which are based on interfacing single magnons to superconducting qubits. However, the coupling of several components often introduces additional noise to the system, degrading…
▽ More
Unwanted fluctuations over time, in short, noise, are detrimental to device performance, especially for quantum coherent circuits. Recent efforts have demonstrated routes to utilizing magnon systems for quantum technologies, which are based on interfacing single magnons to superconducting qubits. However, the coupling of several components often introduces additional noise to the system, degrading its coherence. Researching the temporal behavior can help to identify the underlying noise sources, which is a vital step in increasing coherence times and the hybrid device performance. Yet, the frequency noise of the ferromagnetic resonance (FMR) has so far been unexplored. Here, we investigate such FMR frequency fluctuations of a YIG sphere down to mK-temperatures, and find them independent of temperature and drive power. This suggests that the measured frequency noise in YIG is dominated by so far undetermined noise sources, which properties are not consistent with the conventional model of two-level systems, despite their effect on the sample linewidth. Moreover, the functional form of the FMR frequency noise power spectral density (PSD) cannot be described by a simple power law. By employing time-series analysis, we find a closed function for the PSD that fits our observations. Our results underline the necessity of coherence improvements to magnon systems for useful applications in quantum magnonics.
△ Less
Submitted 14 July, 2021;
originally announced July 2021.
-
Strong magnon-photon coupling with chip-integrated YIG in the zero-temperature limit
Authors:
Paul G. Baity,
Dmytro A. Bozhko,
Rair Macêdo,
William Smith,
Rory C. Holland,
Sergey Danilin,
Valentino Seferai,
João Barbosa,
Renju R. Peroor,
Sara Goldman,
Umberto Nasti,
Jharna Paul,
Robert H. Hadfield,
Stephen McVitie,
Martin Weides
Abstract:
The cross-integration of spin-wave and superconducting technologies is a promising method for creating novel hybrid devices for future information processing technologies to store, manipulate, or convert data in both classical and quantum regimes. Hybrid magnon-polariton systems have been widely studied using bulk Yttrium Iron Garnet (Y$_{3}$Fe$_{5}$O$_{12}$, YIG) and three-dimensional microwave p…
▽ More
The cross-integration of spin-wave and superconducting technologies is a promising method for creating novel hybrid devices for future information processing technologies to store, manipulate, or convert data in both classical and quantum regimes. Hybrid magnon-polariton systems have been widely studied using bulk Yttrium Iron Garnet (Y$_{3}$Fe$_{5}$O$_{12}$, YIG) and three-dimensional microwave photon cavities. However, limitations in YIG growth have thus far prevented its incorporation into CMOS compatible technology such as high quality factor superconducting quantum technology. To overcome this impediment, we have used Plasma Focused Ion Beam (PFIB) technology -- taking advantage of precision placement down to the micron-scale -- to integrate YIG with superconducting microwave devices. Ferromagnetic resonance has been measured at millikelvin temperatures on PFIB-processed YIG samples using planar microwave circuits. Furthermore, we demonstrate strong coupling between superconducting resonator and YIG ferromagnetic resonance modes by maintaining reasonably low loss while reducing the system down to the micron scale. This achievement of strong coupling on-chip is a crucial step toward fabrication of functional hybrid quantum devices that advantage from spin-wave and superconducting components.
△ Less
Submitted 14 June, 2021; v1 submitted 16 April, 2021;
originally announced April 2021.
-
Quantum sensing with superconducting circuits
Authors:
S. Danilin,
M. Weides
Abstract:
Sensing and metrology play an important role in fundamental science and applications, by fulfilling the ever-present need for more precise data sets, and by allowing to make more reliable conclusions on the validity of theoretical models. Sensors are ubiquitous, they are used in applications across a diverse range of fields including gravity imaging, geology, navigation, security, timekee**, spe…
▽ More
Sensing and metrology play an important role in fundamental science and applications, by fulfilling the ever-present need for more precise data sets, and by allowing to make more reliable conclusions on the validity of theoretical models. Sensors are ubiquitous, they are used in applications across a diverse range of fields including gravity imaging, geology, navigation, security, timekee**, spectroscopy, chemistry, magnetometry, healthcare, and medicine. Current progress in quantum technologies inevitably triggers the exploration of quantum systems to be used as sensors with new and improved capabilities. This perspective initially provides a brief review of existing and tested quantum sensing systems, before discussing future possible directions of superconducting quantum circuits use for sensing and metrology: superconducting sensors including many entangled qubits and schemes employing Quantum Error Correction. The perspective also lists future research directions that could be of great value beyond quantum sensing, e.g. for applications in quantum computation and simulation.
△ Less
Submitted 19 March, 2021;
originally announced March 2021.
-
Quantum computing hardware in the cloud: Should a computational chemist care?
Authors:
A. Rossi,
P. G. Baity,
V. M. Schäfer,
M. Weides
Abstract:
Within the last decade much progress has been made in the experimental realisation of quantum computing hardware based on a variety of physical systems. Rapid progress has been fuelled by the conviction that sufficiently powerful quantum machines will herald enormous computational advantages in many fields, including chemical research. A quantum computer capable of simulating the electronic struct…
▽ More
Within the last decade much progress has been made in the experimental realisation of quantum computing hardware based on a variety of physical systems. Rapid progress has been fuelled by the conviction that sufficiently powerful quantum machines will herald enormous computational advantages in many fields, including chemical research. A quantum computer capable of simulating the electronic structures of complex molecules would be a game changer for the design of new drugs and materials. Given the potential implications of this technology, there is a need within the chemistry community to keep abreast with the latest developments as well as becoming involved in experimentation with quantum prototypes. To facilitate this, here we review the types of quantum computing hardware that have been made available to the public through cloud services. We focus on three architectures, namely superconductors, trapped ions and semiconductors. For each one we summarise the basic physical operations, requirements and performance. We discuss to what extent each system has been used for molecular chemistry problems and highlight the most pressing hardware issues to be solved for a chemistry-relevant quantum advantage to eventually emerge.
△ Less
Submitted 31 May, 2021; v1 submitted 5 February, 2021;
originally announced February 2021.
-
Ultra-strong photon-to-magnon coupling in multilayered heterostructures involving superconducting coherence via ferromagnetic layers
Authors:
I. A. Golovchanskiy,
N. N. Abramov,
V. S. Stolyarov,
M. Weides,
V. V. Ryazanov,
A. A. Golubov,
A. V. Ustinov,
M. Yu. Kupriyanov
Abstract:
The critical step for future quantum industry demands realization of efficient information exchange between different-platform hybrid systems, including photonic and magnonic systems, that can harvest advantages of distinct platforms. The major restraining factor for the progress in certain hybrid systems is the fundamentally weak coupling parameter between the elemental particles. This restrictio…
▽ More
The critical step for future quantum industry demands realization of efficient information exchange between different-platform hybrid systems, including photonic and magnonic systems, that can harvest advantages of distinct platforms. The major restraining factor for the progress in certain hybrid systems is the fundamentally weak coupling parameter between the elemental particles. This restriction impedes the entire field of hybrid magnonics by making realization of scalable on-chip hybrid magnonic systems unattainable. In this work, we propose a general flexible approach for realization of on-chip hybrid magnonic systems with unprecedentedly strong coupling parameters. The approach is based on multilayered micro-structures containing superconducting, insulating and ferromagnetic layers with modified both photon phase velocities and magnon eigen-frequencies. Phenomenologically, the enhanced coupling strength is provided by the radically reduced photon mode volume. The microscopic mechanism of the phonon-to-magnon coupling in studied systems evidences formation of the long-range superconducting coherence via thick strong ferromagnetic layers. This coherence is manifested by coherent superconducting screening of microwave fields by the superconductor/ferromagnet/superconductor three-layers in presence of magnetization precession. This discovery offers new opportunities in microwave superconducting spintronics for quantum technologies.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
An Electromagnetic Approach to Cavity Spintronics
Authors:
Rair Macêdo,
Rory C. Holland,
Paul G. Baity,
Luke J. McLellan,
Karen L. Livesey,
Robert L. Stamps,
Martin P. Weides,
Dmytro A. Bozhko
Abstract:
The fields of cavity quantum electrodynamics and magnetism have recently merged into \textit{`cavity spintronics'}, investigating a quasiparticle that emerges from the strong coupling between standing electromagnetic waves confined in a microwave cavity resonator and the quanta of spin waves, magnons. This phenomenon is now expected to be employed in a variety of devices for applications ranging f…
▽ More
The fields of cavity quantum electrodynamics and magnetism have recently merged into \textit{`cavity spintronics'}, investigating a quasiparticle that emerges from the strong coupling between standing electromagnetic waves confined in a microwave cavity resonator and the quanta of spin waves, magnons. This phenomenon is now expected to be employed in a variety of devices for applications ranging from quantum communication to dark matter detection. To be successful, most of these applications require a vast control of the coupling strength, resulting in intensive efforts to understanding coupling by a variety of different approaches. Here, the electromagnetic properties of both resonator and magnetic samples are investigated to provide a comprehensive understanding of the coupling between these two systems. Because the coupling is a consequence of the excitation vector fields, which directly interact with magnetisation dynamics, a highly-accurate electromagnetic perturbation theory is employed which allows for predicting the resonant hybrid mode frequencies for any field configuration within the cavity resonator, without any fitting parameters. The coupling is shown to be strongly dependent not only on the excitation vector fields and sample's magnetic properties but also on the sample's shape. These findings are illustrated by applying the theoretical framework to two distinct experiments: a magnetic sphere placed in a three-dimensional resonator, and a rectangular, magnetic prism placed on a two-dimensional resonator. The theory provides comprehensive understanding of the overall behaviour of strongly coupled systems and it can be easily modified for a variety of other systems.
△ Less
Submitted 25 October, 2020; v1 submitted 22 July, 2020;
originally announced July 2020.
-
Coherent superconducting qubits from a subtractive junction fabrication process
Authors:
Alexander Stehli,
Jan David Brehm,
Tim Wolz,
Paul Baity,
Sergey Danilin,
Valentino Seferai,
Hannes Rotzinger,
Alexey V. Ustinov,
Martin Weides
Abstract:
Josephson tunnel junctions are the centerpiece of almost any superconducting electronic circuit, including qubits. Typically, the junctions for qubits are fabricated using shadow evaporation techniques to reduce dielectric loss contributions from the superconducting film interfaces. In recent years, however, sub-micron scale overlap junctions have started to attract attention. Compared to shadow m…
▽ More
Josephson tunnel junctions are the centerpiece of almost any superconducting electronic circuit, including qubits. Typically, the junctions for qubits are fabricated using shadow evaporation techniques to reduce dielectric loss contributions from the superconducting film interfaces. In recent years, however, sub-micron scale overlap junctions have started to attract attention. Compared to shadow mask techniques, neither an angle dependent deposition nor free-standing bridges or overlaps are needed, which are significant limitations for wafer-scale processing. This comes at the cost of breaking the vacuum during fabrication, but simplifies integration in multi-layered circuits, implementation of vastly different junction sizes, and enables fabrication on a larger scale in an industrially-standardized process. In this work, we demonstrate the feasibility of a subtractive process for fabrication of overlap junctions. In an array of test contacts, we find low aging of the average normal state resistance of only 1.6\% over 6 months. We evaluate the coherence properties of the junctions by employing them in superconducting transmon qubits. In time domain experiments, we find that both, the qubit life- and coherence time of our best device, are on average greater than $20\,\si{\micro\second}$. Finally, we discuss potential improvements to our technique. This work paves the way towards a more standardized process flow with advanced materials and growth processes, and constitutes an important step for large scale fabrication of superconducting quantum circuits.
△ Less
Submitted 28 September, 2020; v1 submitted 30 June, 2020;
originally announced June 2020.
-
State preparation of a fluxonium qubit with feedback from a custom FPGA-based platform
Authors:
Richard Gebauer,
Nick Karcher,
Daria Gusenkova,
Martin Spiecker,
Lukas Grünhaupt,
Ivan Takmakov,
Patrick Winkel,
Luca Planat,
Nicolas Roch,
Wolfgang Wernsdorfer,
Alexey V. Ustinov,
Marc Weber,
Martin Weides,
Ioan M. Pop,
Oliver Sander
Abstract:
We developed a versatile integrated control and readout instrument for experiments with superconducting quantum bits (qubits), based on a field-programmable gate array (FPGA) platform. Using this platform, we perform measurement-based, closed-loop feedback operations with $428 \, \mathrm{ns}$ platform latency. The feedback capability is instrumental in realizing active reset initialization of the…
▽ More
We developed a versatile integrated control and readout instrument for experiments with superconducting quantum bits (qubits), based on a field-programmable gate array (FPGA) platform. Using this platform, we perform measurement-based, closed-loop feedback operations with $428 \, \mathrm{ns}$ platform latency. The feedback capability is instrumental in realizing active reset initialization of the qubit into the ground state in a time much shorter than its energy relaxation time $T_1$. We show experimental results demonstrating reset of a fluxonium qubit with $99.4\,\%$ fidelity, using a readout-and-drive pulse sequence approximately $1.5 \, \mathrm{μs}$ long. Compared to passive ground state initialization through thermalization, with the time constant given by $T_1 = ~ 80 \, \mathrm{μs}$, the use of the FPGA-based platform allows us to improve both the fidelity and the time of the qubit initialization by an order of magnitude.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
Structural and Nanochemical Properties of AlOx Layers in $Al/AlO_x/Al$-Layer Systems for Josephson Junctions
Authors:
S. Fritz,
L. Radtke,
R. Schneider,
M. Luysberg,
M. Weides,
D. Gerthsen
Abstract:
The structural and nanochemical properties of thin $AlO_x$ layers are decisive for the performance of advanced electronic devices. For example, they are frequently used as tunnel barriers in Josephson junction-based superconducting devices. However, systematic studies of the influence of oxidation parameters on structural and nanochemical properties are rare up to now, as most studies focus on the…
▽ More
The structural and nanochemical properties of thin $AlO_x$ layers are decisive for the performance of advanced electronic devices. For example, they are frequently used as tunnel barriers in Josephson junction-based superconducting devices. However, systematic studies of the influence of oxidation parameters on structural and nanochemical properties are rare up to now, as most studies focus on the electrical properties of $AlO_x$ layers. This study aims to close this gap by applying transmission electron microscopy in combination with electron energy loss spectroscopy to analyze the structural and nanochemical properties of differently fabricated $AlO_x$ layers and correlate them with fabrication parameters. With respect to the application of $AlO_x$ as tunnel barrier in superconducting Josephson junctions, $Al/AlO_x/Al$-layer systems were deposited on Si substrates. We will show that the oxygen content and structure of amorphous $AlO_x$ layers is strongly dependent on the fabrication process and oxidation parameters. Dynamic and static oxidation of Al yields oxygen-deficient amorphous $AlO_x$ layers, where the oxygen content ranges from x = 0.5 to x = 1.3 depending on oxygen pressure and substrate temperature. Thicker layers of stoichiometric crystalline $γ-Al_2O_3$ layers were grown by electron-beam evaporation of $Al_2O_3$ and reactive sputter deposition.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
Amplitude and frequency sensing of microwave fields with a superconducting transmon qudit
Authors:
Maximilian Kristen,
Andre Schneider,
Alexander Stehli,
Tim Wolz,
Sergey Danilin,
Hsiang S. Ku,
Junling Long,
Xian Wu,
Russell E. Lake,
David P. Pappas,
Alexey V. Ustinov,
Martin Weides
Abstract:
Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave signal can be inferred from the…
▽ More
Experiments with superconducting circuits require careful calibration of the applied pulses and fields over a large frequency range. This remains an ongoing challenge as commercial semiconductor electronics are not able to probe signals arriving at the chip due to its cryogenic environment. Here, we demonstrate how the on-chip amplitude and frequency of a microwave signal can be inferred from the ac Stark shifts of higher transmon levels. In our time-resolved measurements we employ Ramsey fringes, allowing us to detect the amplitude of the systems transfer function over a range of several hundreds of MHz with an energy sensitivity on the order of $10^{-4}$. Combined with similar measurements for the phase of the transfer function, our sensing method can facilitate pulse correction for high fidelity quantum gates in superconducting circuits. Additionally, the potential to characterize arbitrary microwave fields promotes applications in related areas of research, such as quantum optics or hybrid microwave systems including photonic, mechanical or magnonic subsystems.
△ Less
Submitted 20 May, 2020; v1 submitted 26 August, 2019;
originally announced August 2019.
-
Steering between Level Repulsion and Attraction: Broad tunability of Two-Port Driven Cavity Magnon-Polaritons
Authors:
Isabella Boventer,
Mathias Kläui,
Rair Macêdo,
Martin Weides
Abstract:
Cavity-magnon polaritons (CMPs) are the associated quasiparticles of the hybridization between cavity photons and magnons in a magnetic sample placed in a microwave resonator. In the strong coupling regime, where the macroscopic coupling strength exceeds the individual dissipation, there is a coherent exchange of information. This renders CMPs as promising candidates for future applications such a…
▽ More
Cavity-magnon polaritons (CMPs) are the associated quasiparticles of the hybridization between cavity photons and magnons in a magnetic sample placed in a microwave resonator. In the strong coupling regime, where the macroscopic coupling strength exceeds the individual dissipation, there is a coherent exchange of information. This renders CMPs as promising candidates for future applications such as in information processing. Recent advances on the study of the CMP now allow not only for creation of CMPs on demand, but also for tuning of the coupling strength - this can be thought of as enhancing or suppressing of information exchange. Here, we go beyond standard single-port driven CMPs and employ a two-port driven CMP. We control the coupling strength by the relative phase $φ$ and amplitude field ratio $δ_0$ between both ports. Specifically, we derive a new expression from Input-Output theory for the study of the two-port driven CMP and discuss the implications on the coupling strength. Furthermore, we examine intermediate cases where the relative phase is tuned between its maximal and minimal value and, in particular, the high $δ_0$ regime, which has not been yet explored.
△ Less
Submitted 23 December, 2019; v1 submitted 15 August, 2019;
originally announced August 2019.
-
Rabi oscillations in a superconducting nanowire circuit
Authors:
Yannick Schön,
Jan Nicolas Voss,
Micha Wildermuth,
Andre Schneider,
Sebastian T. Skacel,
Martin P. Weides,
Jared H. Cole,
Hannes Rotzinger,
Alexey V. Ustinov
Abstract:
We investigate the circuit quantum electrodynamics of anharmonic superconducting nanowire oscillators. The sample circuit consists of a capacitively shunted nanowire with a width of about 20 nm and a varying length up to 350 nm, capacitively coupled to an on-chip resonator. By applying microwave pulses we observe Rabi oscillations, measure coherence times and the anharmonicity of the circuit. Desp…
▽ More
We investigate the circuit quantum electrodynamics of anharmonic superconducting nanowire oscillators. The sample circuit consists of a capacitively shunted nanowire with a width of about 20 nm and a varying length up to 350 nm, capacitively coupled to an on-chip resonator. By applying microwave pulses we observe Rabi oscillations, measure coherence times and the anharmonicity of the circuit. Despite the very compact design, simple top-down fabrication and high degree of disorder in the oxidized (granular) aluminum material used, we observe lifetimes in the microsecond range.
△ Less
Submitted 16 March, 2020; v1 submitted 9 July, 2019;
originally announced July 2019.
-
Introducing coherent time control to cavity-magnon-polariton modes
Authors:
Tim Wolz,
Alexander Stehli,
Andre Schneider,
Isabella Boventer,
Rair Macêdo,
Alexey V. Ustinov,
Mathias Kläui,
Martin Weides
Abstract:
By connecting light to magnetism, cavity-magnon-polaritons (CMPs) can build links from quantum computation to spintronics. As a consequence, CMP-based information processing devices have thrived over the last five years, but almost exclusively been investigated with single-tone spectroscopy. However, universal computing applications will require a dynamic control of the CMP on demand and within na…
▽ More
By connecting light to magnetism, cavity-magnon-polaritons (CMPs) can build links from quantum computation to spintronics. As a consequence, CMP-based information processing devices have thrived over the last five years, but almost exclusively been investigated with single-tone spectroscopy. However, universal computing applications will require a dynamic control of the CMP on demand and within nanoseconds. In this work, we perform fast manipulations of the different CMP modes with independent but coherent pulses to the cavity and magnon system. We change the state of the CMP from the energy exchanging beat mode to its normal modes and further demonstrate two fundamental examples of coherent manipulation: First, a dynamic control over the appearance of magnon-Rabi oscillations, i.e., energy exchange, and second, a complete energy extraction by applying an anti-phase drive to the magnon. Our results show a promising approach to control different building blocks for a quantum internet and pave the way for further magnon-based quantum computing research.
△ Less
Submitted 31 July, 2019; v1 submitted 19 June, 2019;
originally announced June 2019.
-
Control of the Coupling Strength and the Linewidth of a Cavity-Magnon Polariton
Authors:
Isabella Boventer,
Christine Dörflinger,
Tim Wolz,
Rair Macêdo,
Romain Lebrun,
Mathias Kläui,
Martin Weides
Abstract:
The full coherent control of hybridized systems such as strongly coupled cavity photon-magnon states is a crucial step to enable future information processing technologies. Thus, it is particularly interesting to engineer deliberate control mechanisms such as the full control of the coupling strength as a measure for coherent information exchange. In this work, we employ cavity resonator spectrosc…
▽ More
The full coherent control of hybridized systems such as strongly coupled cavity photon-magnon states is a crucial step to enable future information processing technologies. Thus, it is particularly interesting to engineer deliberate control mechanisms such as the full control of the coupling strength as a measure for coherent information exchange. In this work, we employ cavity resonator spectroscopy to demonstrate the complete control of the coupling strength of hybridized cavity photon-magnon states. For this, we use two driving microwave inputs which can be tuned at will. Here, only the first input couples directly to the cavity resonator photons, whilst the second tone exclusively acts as a direct input for the magnons. For these inputs, both the relative phase $φ$ and amplitude $δ_0$ can be independently controlled. We demonstrate that for specific quadratures between both tones, we can increase the coupling strength, close the anticrossing gap, and enter a regime of level merging. At the transition, the total amplitude is enhanced by a factor of 1000 and we observe an additional linewidth decrease of $13\%$ at resonance due to level merging. Such control of the coupling, and hence linewidth, open up an avenue to enable or suppress an exchange of information and bridging the gap between quantum information and spintronics applications.
△ Less
Submitted 31 March, 2019;
originally announced April 2019.
-
Transmon Qubit in a Magnetic Field: Evolution of Coherence and Transition Frequency
Authors:
Andre Schneider,
Tim Wolz,
Marco Pfirrmann,
Martin Spiecker,
Hannes Rotzinger,
Alexey V. Ustinov,
Martin Weides
Abstract:
We report on spectroscopic and time-domain measurements on a fixed-frequency concentric transmon qubit in an applied in-plane magnetic field to explore its limits of magnetic field compatibility. We demonstrate quantum coherence of the qubit up to field values of $B={40}\,\mathrm{mT}$, even without an optimized chip design or material combination of the qubit. The dephasing rate $Γ_\varphi$ is sho…
▽ More
We report on spectroscopic and time-domain measurements on a fixed-frequency concentric transmon qubit in an applied in-plane magnetic field to explore its limits of magnetic field compatibility. We demonstrate quantum coherence of the qubit up to field values of $B={40}\,\mathrm{mT}$, even without an optimized chip design or material combination of the qubit. The dephasing rate $Γ_\varphi$ is shown to be not affected by the magnetic field in a broad range of the qubit transition frequency. For the evolution of the qubit transition frequency, we find the unintended second junction created in the shadow angle evaporation process to be non-negligible and deduce an analytic formula for the field-dependent qubit energies. We discuss the relevant field-dependent loss channels, which can not be distinguished by our measurements, inviting further theoretical and experimental investigation. Using well-known and well-studied standard components of the superconducting quantum architecture, we are able to reach a field regime relevant for quantum sensing and hybrid applications of magnetic spins and spin systems.
△ Less
Submitted 6 September, 2019; v1 submitted 30 March, 2019;
originally announced April 2019.
-
Magnons at low excitations: Observation of incoherent coupling to a bath of two-level-systems
Authors:
Marco Pfirrmann,
Isabella Boventer,
Andre Schneider,
Tim Wolz,
Mathias Kläui,
Alexey V. Ustinov,
Martin Weides
Abstract:
Collective magnetic excitation modes, magnons, can be coherently coupled to microwave photons in the single excitation limit. This allows for access to quantum properties of magnons and opens up a range of applications in quantum information processing, with the intrinsic magnon linewidth representing the coherence time of a quantum resonator. Our measurement system consists of a yttrium iron garn…
▽ More
Collective magnetic excitation modes, magnons, can be coherently coupled to microwave photons in the single excitation limit. This allows for access to quantum properties of magnons and opens up a range of applications in quantum information processing, with the intrinsic magnon linewidth representing the coherence time of a quantum resonator. Our measurement system consists of a yttrium iron garnet (YIG) sphere and a three-dimensional (3D) microwave cavity at temperatures and excitation powers typical for superconducting quantum circuit experiments. We perform spectroscopic measurements to determine the limiting factor of magnon coherence at these experimental conditions. Using the input-output formalism, we extract the magnon linewidth $κ_\mathrm{m}$. We attribute the limitations of the coherence time at lowest temperatures and excitation powers to incoherent losses into a bath of near-resonance two-level systems (TLSs), a generic loss mechanism known from superconducting circuits under these experimental conditions. We find that the TLSs saturate when increasing the excitation power from quantum excitation to multi-photon excitation and their contribution to the linewidth vanishes. At higher temperatures, the TLSs saturate thermally and the magnon linewidth decreases as well.
△ Less
Submitted 25 November, 2019; v1 submitted 10 March, 2019;
originally announced March 2019.
-
Interplay of magnetization dynamics with microwave waveguide at cryogenic temperatures
Authors:
I. A. Golovchanskiy,
N. N. Abramov,
M. Pfirrmann,
T. Piskor,
J. N. Voss,
D. S. Baranov,
R. A. Hovhannisyan,
V. S. Stolyarov,
C. Dubs,
A. A. Golubov,
V. V. Ryazanov,
A. V. Ustinov,
M. Weides
Abstract:
In this work, magnetization dynamics is studied at low temperatures in a hybrid system that consists of thin epitaxial magnetic film coupled with superconducting planar microwave waveguide. The resonance spectrum was observed in a wide magnetic field range, including low fields below the saturation magnetization and both polarities. Analysis of the spectrum via a developed fitting routine allowed…
▽ More
In this work, magnetization dynamics is studied at low temperatures in a hybrid system that consists of thin epitaxial magnetic film coupled with superconducting planar microwave waveguide. The resonance spectrum was observed in a wide magnetic field range, including low fields below the saturation magnetization and both polarities. Analysis of the spectrum via a developed fitting routine allowed to derive all magnetic parameters of the film at cryogenic temperatures, to detect waveguide-induced uniaxial magnetic anisotropies of the first and the second order, and to uncover a minor misalignment of magnetic field. A substantial influence of the superconducting critical state on resonance spectrum is observed and discussed.
△ Less
Submitted 28 March, 2019; v1 submitted 20 February, 2019;
originally announced February 2019.
-
Optimization of $Al/AlO_x/Al$-Layer Systems for Josephson Junctions from a Microstructure Point of View
Authors:
S. Fritz,
L. Radtke,
R. Schneider,
M. Weides,
D. Gerthsen
Abstract:
$Al/AlO_x/Al…
▽ More
$Al/AlO_x/Al$-layer systems are frequently used for Josephson junction-based superconducting devices. Although much work has been devoted to the optimization of the superconducting properties of these devices, systematic studies on influence of deposition conditions combined with structural analyses on the nanoscale are rare up to now. We have focused on the optimization of the structural properties of $Al/AlO_x/Al$-layer systems deposited on Si(111) substrates with a particular focus on the thickness homogeneity of the $AlO_x$-tunnel barrier. A standard high-vacuum electron-beam deposition system was used and the effect of substrate pretreatment, different Al-deposition temperatures and Al-deposition rates was studied. Transmission electron microscopy was applied to analyze the structural properties of the $Al/AlO_x/Al$-layer systems to determine the thickness homogeneity of the $AlO_x$ layer, grain size distribution in the Al layers, Al-grain boundary types and the morphology of the $Al/AlO_x$ interface. We show that the structural properties of the lower Al layer are decisive for the structural quality of the whole $Al/AlO_x/Al$-layer system. Optimum conditions yield an epitaxial Al(111) layer on a Si(111) substrate with an Al-layer thickness variation of only 1.6 nm over more than 10 $μm$ and large lateral grain sizes up to 1 $μm$. Thickness fluctuations of the $AlO_x$-tunnel barrier are minimized on such an Al layer which is essential for the homogeneity of the tunnel current. Systematic variation of the Al-deposition rate and deposition temperature allows to develop an understanding of the growth mechanisms.
△ Less
Submitted 8 March, 2019; v1 submitted 28 January, 2019;
originally announced January 2019.
-
Correlating decoherence in transmon qubits: Low frequency noise by single fluctuators
Authors:
Steffen Schlör,
Jürgen Lisenfeld,
Clemens Müller,
Alexander Bilmes,
Andre Schneider,
David P. Pappas,
Alexey V. Ustinov,
Martin Weides
Abstract:
We report on long-term measurements of a highly coherent, non-tunable superconducting transmon qubit, revealing low-frequency burst noise in coherence times and qubit transition frequency. We achieve this through a simultaneous measurement of the qubit's relaxation and dephasing rate as well as its resonance frequency. The analysis of correlations between these parameters yields information about…
▽ More
We report on long-term measurements of a highly coherent, non-tunable superconducting transmon qubit, revealing low-frequency burst noise in coherence times and qubit transition frequency. We achieve this through a simultaneous measurement of the qubit's relaxation and dephasing rate as well as its resonance frequency. The analysis of correlations between these parameters yields information about the microscopic origin of the intrinsic decoherence mechanisms in Josephson qubits. Our results are consistent with a small number of microscopic two-level systems located at the edges of the superconducting film, which is further confirmed by a spectral noise analysis.
△ Less
Submitted 27 June, 2019; v1 submitted 16 January, 2019;
originally announced January 2019.
-
Probing the Tavis-Cummings level splitting with intermediate-scale superconducting circuits
Authors:
** Yang,
Jan David Brehm,
Juha Leppäkangas,
Lingzhen Guo,
Michael Marthaler,
Isabella Boventer,
Alexander Stehli,
Tim Wolz,
Alexey V. Ustinov,
Martin Weides
Abstract:
We demonstrate the local control of up to eight two-level systems interacting strongly with a microwave cavity. Following calibration, the frequency of each individual two-level system (qubit) is tunable without influencing the others. Bringing the qubits one by one on resonance with the cavity, we observe the collective coupling strength of the qubit ensemble. The splitting scales up with the squ…
▽ More
We demonstrate the local control of up to eight two-level systems interacting strongly with a microwave cavity. Following calibration, the frequency of each individual two-level system (qubit) is tunable without influencing the others. Bringing the qubits one by one on resonance with the cavity, we observe the collective coupling strength of the qubit ensemble. The splitting scales up with the square root of the number of the qubits, which is the hallmark of the Tavis-Cummings model. The local control circuitry causes a bypass shunting the resonator, and a Fano interference in the microwave readout, whose contribution can be calibrated away to recover the pure cavity spectrum. The simulator's attainable size of dressed states with up to five qubits is limited by reduced signal visibility, and -- if uncalibrated -- by off-resonance shifts of sub-components. Our work demonstrates control and readout of quantum coherent mesoscopic multi-qubit system of intermediate scale under conditions of noise.
△ Less
Submitted 7 June, 2020; v1 submitted 1 October, 2018;
originally announced October 2018.
-
Resonance inversion in a superconducting cavity coupled to artificial atoms and a microwave background
Authors:
Juha Leppäkangas,
Jan David Brehm,
** Yang,
Lingzhen Guo,
Michael Marthaler,
Alexey V. Ustinov,
Martin Weides
Abstract:
We demonstrate how heating of an environment can invert the line shape of a driven cavity. We consider a superconducting coplanar cavity coupled to multiple artificial atoms. The measured cavity transmission is characterized by Fano-type resonances with a shape that is continuously tunable by bias current through nearby (magnetic flux) control lines. In particular, the same dispersive shift of the…
▽ More
We demonstrate how heating of an environment can invert the line shape of a driven cavity. We consider a superconducting coplanar cavity coupled to multiple artificial atoms. The measured cavity transmission is characterized by Fano-type resonances with a shape that is continuously tunable by bias current through nearby (magnetic flux) control lines. In particular, the same dispersive shift of the microwave cavity can be observed as a peak or a dip. We find that this Fano-peak inversion is possible due to a tunable interference between a microwave transmission through a background, with reactive and dissipative properties, and through the cavity, affected by bias-current induced heating. The background transmission occurs due to crosstalk between the control and transmission lines. We show how such background can be accounted for by Jaynes-Cummings type models via modified boundary conditions between the cavity and transmission lines. We find generally that whereas resonance positions determine system energy levels, resonance shapes give information on system fluctuations and dissipation.
△ Less
Submitted 4 June, 2019; v1 submitted 25 July, 2018;
originally announced July 2018.
-
Nonreciprocity realized with quantum nonlinearity
Authors:
Andrés Rosario Hamann,
Clemens Müller,
Markus Jerger,
Maximilian Zanner,
Joshua Combes,
Mikhail Pletyukhov,
Martin Weides,
Thomas M. Stace,
Arkady Fedorov
Abstract:
Nonreciprocal devices are a key element for signal routing and noise isolation. Rapid development of quantum technologies has boosted the demand for a new generation of miniaturized and low-loss nonreciprocal components. Here we use a pair of tunable superconducting artificial atoms in a 1D waveguide to experimentally realize a minimal passive nonreciprocal device. Taking advantage of the quantum…
▽ More
Nonreciprocal devices are a key element for signal routing and noise isolation. Rapid development of quantum technologies has boosted the demand for a new generation of miniaturized and low-loss nonreciprocal components. Here we use a pair of tunable superconducting artificial atoms in a 1D waveguide to experimentally realize a minimal passive nonreciprocal device. Taking advantage of the quantum nonlinear behavior of artificial atoms, we achieve nonreciprocal transmission through the waveguide in a wide range of powers. Our results are consistent with theoretical modeling showing that nonreciprocity is associated with the population of the two-qubit nonlocal entangled quasi-dark state, which responds asymmetrically to incident fields from opposing directions. Our experiment highlights the role of quantum correlations in enabling nonreciprocal behavior and opens a path to building passive quantum nonreciprocal devices without magnetic fields.
△ Less
Submitted 8 June, 2018; v1 submitted 1 June, 2018;
originally announced June 2018.
-
Local Sensing with the Multi-Level AC Stark Effect
Authors:
Andre Schneider,
Jochen Braumüller,
Lingzhen Guo,
Patrizia Stehle,
Hannes Rotzinger,
Michael Marthaler,
Alexey V. Ustinov,
Martin Weides
Abstract:
Analyzing weak microwave signals in the GHz regime is a challenging task if the signal level is very low and the photon energy widely undefined. A superconducting qubit can detect signals in the low photon regime, but due to its discrete level structure, it is only sensitive to photons of certain energies. With a multi-level quantum system (qudit) in contrast, the unknown signal frequency and ampl…
▽ More
Analyzing weak microwave signals in the GHz regime is a challenging task if the signal level is very low and the photon energy widely undefined. A superconducting qubit can detect signals in the low photon regime, but due to its discrete level structure, it is only sensitive to photons of certain energies. With a multi-level quantum system (qudit) in contrast, the unknown signal frequency and amplitude can be deduced from the higher level AC Stark shift. The measurement accuracy is given by the signal amplitude, its detuning from the discrete qudit energy level structure and the anharmonicity. We demonstrate an energy sensitivity in the order of $10^{-3}$ with a measurement range of more than $1\,\mathrm{GHz}$. Here, using a transmon qubit, we experimentally observe shifts in the transition frequencies involving up to three excited levels. These shifts are in good agreement with an analytic circuit model and master equation simulations. For large detunings, we find the shifts to scale linearly with the power of the applied microwave drive. Exploiting the effect, we demonstrated a power meter which makes it possible to characterize the microwave transmission from source to sample.
△ Less
Submitted 8 May, 2018; v1 submitted 16 January, 2018;
originally announced January 2018.
-
Complex temperature dependence of coupling and dissipation of cavity-magnon polaritons from milliKelvin to room temperature
Authors:
Isabella Boventer,
Marco Pfirrmann,
Julius Krause,
Yannick Schön,
Mathias Kläui,
Martin Weides
Abstract:
Hybridized magnonic-photonic systems are key components for future information processing technologies such as storage, manipulation or conversion of data both in the classical (mostly at room temperature) and quantum (cryogenic) regime. In this work, we investigate a YIG sphere coupled strongly to a microwave cavity over the full temperature range from $290\,\mathrm{K}$ down to $30\,\mathrm{mK}$.…
▽ More
Hybridized magnonic-photonic systems are key components for future information processing technologies such as storage, manipulation or conversion of data both in the classical (mostly at room temperature) and quantum (cryogenic) regime. In this work, we investigate a YIG sphere coupled strongly to a microwave cavity over the full temperature range from $290\,\mathrm{K}$ down to $30\,\mathrm{mK}$. The cavity-magnon polaritons are studied from the classical to the quantum regime where the thermal energy is less than one resonant microwave quanta, i.e. at temperatures below $1\,\mathrm{K}$. We compare the temperature dependence of the coupling strength $g_{\rm{eff}}(T)$, describing the strength of coherent energy exchange between spin ensemble and cavity photon, to the temperature behavior of the saturation magnetization evolution $M_{\rm{s}}(T)$ and find strong deviations at low temperatures. The temperature dependence of magnonic disspation is governed at intermediate temperatures by rare earth impurity scattering leading to a strong peak at $40\,$K. The linewidth $κ_{\rm{m}}$ decreases to $1.2\,$MHz at $30\,$mK, making this system suitable as a building block for quantum electrodynamics experiments. We achieve an electromagnonic cooperativity in excess of $20$ over the entire temperature range, with values beyond $100$ in the milliKelvin regime as well as at room temperature. With our measurements, spectroscopy on strongly coupled magnon-photon systems is demonstrated as versatile tool for spin material studies over large temperature ranges. Key parameters are provided in a single measurement, thus simplifying investigations significantly.
△ Less
Submitted 4 January, 2018;
originally announced January 2018.
-
Correlating the nanostructure of Al-oxide with deposition conditions and dielectric contributions of two-level systems in perspective of superconducting quantum circuits
Authors:
S. Fritz,
A. Seiler,
L. Radtke,
R. Schneider,
M. Weides,
G. Weiß,
D. Gerthsen
Abstract:
This work is concerned with Al/Al-oxide(AlO$_{x}$)/Al-layer systems which are important for Josephson-junction-based superconducting devices such as quantum bits. The device performance is limited by noise, which has been to a large degree assigned to the presence and properties of two-level tunneling systems in the amorphous AlO$_{x}$ tunnel barrier. The study is focused on the correlation of the…
▽ More
This work is concerned with Al/Al-oxide(AlO$_{x}$)/Al-layer systems which are important for Josephson-junction-based superconducting devices such as quantum bits. The device performance is limited by noise, which has been to a large degree assigned to the presence and properties of two-level tunneling systems in the amorphous AlO$_{x}$ tunnel barrier. The study is focused on the correlation of the fabrication conditions, nanostructural and nanochemical properties and the occurrence of two-level tunneling systems with particular emphasis on the AlO$_{x}$-layer. Electron-beam evaporation with two different processes and sputter deposition were used for structure fabrication, and the effect of illumination by ultraviolet light during Al-oxide formation is elucidated. Characterization was performed by analytical transmission electron microscopy and low-temperature dielectric measurements. We show that the fabrication conditions have a strong impact on the nanostructural and nanochemical properties of the layer systems and the properties of two-level tunneling systems. Based on the understanding of the observed structural characteristics, routes are derived towards the fabrication of Al/AlO$_{x}$/Al-layers systems with improved properties.
△ Less
Submitted 5 December, 2017;
originally announced December 2017.
-
Quantum simulation of the spin-boson model with a microwave circuit
Authors:
Juha Leppäkangas,
Jochen Braumüller,
Melanie Hauck,
Jan-Michael Reiner,
Iris Schwenk,
Sebastian Zanker,
Lukas Fritz,
Alexey V. Ustinov,
Martin Weides,
Michael Marthaler
Abstract:
We consider superconducting circuits for the purpose of simulating the spin-boson model. The spin-boson model consists of a single two-level system coupled to bosonic modes. In most cases, the model is considered in a limit where the bosonic modes are sufficiently dense to form a continuous spectral bath. A very well known case is the ohmic bath, where the density of states grows linearly with the…
▽ More
We consider superconducting circuits for the purpose of simulating the spin-boson model. The spin-boson model consists of a single two-level system coupled to bosonic modes. In most cases, the model is considered in a limit where the bosonic modes are sufficiently dense to form a continuous spectral bath. A very well known case is the ohmic bath, where the density of states grows linearly with the frequency. In the limit of weak coupling or large temperature, this problem can be solved numerically. If the coupling is strong, the bosonic modes can become sufficiently excited to make a classical simulation impossible. Here, we discuss how a quantum simulation of this problem can be performed by coupling a superconducting qubit to a set of microwave resonators. We demonstrate a possible implementation of a continuous spectral bath with individual bath resonators coupling strongly to the qubit. Applying a microwave drive scheme potentially allows us to access the strong-coupling regime of the spin-boson model. We discuss how the resulting spin relaxation dynamics with different initialization conditions can be probed by standard qubit-readout techniques from circuit quantum electrodynamics.
△ Less
Submitted 24 May, 2018; v1 submitted 20 November, 2017;
originally announced November 2017.
-
An argon ion beam milling process for native $\text{AlO}_\text{x}$ layers enabling coherent superconducting contacts
Authors:
Lukas Grünhaupt,
Uwe von Lüpke,
Daria Gusenkova,
Sebastian T. Skacel,
Nataliya Maleeva,
Steffen Schlör,
Alexander Bilmes,
Hannes Rotzinger,
Alexey V. Ustinov,
Martin Weides,
Ioan M. Pop
Abstract:
We present an argon ion beam milling process to remove the native oxide layer forming on aluminum thin films due to their exposure to atmosphere in between lithographic steps. Our cleaning process is readily integrable with conventional fabrication of Josephson junction quantum circuits. From measurements of the internal quality factors of superconducting microwave resonators with and without cont…
▽ More
We present an argon ion beam milling process to remove the native oxide layer forming on aluminum thin films due to their exposure to atmosphere in between lithographic steps. Our cleaning process is readily integrable with conventional fabrication of Josephson junction quantum circuits. From measurements of the internal quality factors of superconducting microwave resonators with and without contacts, we place an upper bound on the residual resistance of an ion beam milled contact of 50$\,\mathrm{m}Ω\cdot μ\mathrm{m}^2$ at a frequency of 4.5 GHz. Resonators for which only $6\%$ of the total foot-print was exposed to the ion beam milling, in areas of low electric and high magnetic field, showed quality factors above $10^6$ in the single photon regime, and no degradation compared to single layer samples. We believe these results will enable the development of increasingly complex superconducting circuits for quantum information processing.
△ Less
Submitted 16 June, 2017;
originally announced June 2017.
-
Analog quantum simulation of the Rabi model in the ultra-strong coupling regime
Authors:
Jochen Braumüller,
Michael Marthaler,
Andre Schneider,
Alexander Stehli,
Hannes Rotzinger,
Martin Weides,
Alexey V. Ustinov
Abstract:
The quantum Rabi model describes the fundamental mechanism of light-matter interaction. It consists of a two-level atom or qubit coupled to a quantized harmonic mode via a transversal interaction. In the weak coupling regime, it reduces to the well-known Jaynes-Cummings model by applying a rotating wave approximation (RWA). The RWA breaks down in the ultra-strong coupling (USC) regime, where the e…
▽ More
The quantum Rabi model describes the fundamental mechanism of light-matter interaction. It consists of a two-level atom or qubit coupled to a quantized harmonic mode via a transversal interaction. In the weak coupling regime, it reduces to the well-known Jaynes-Cummings model by applying a rotating wave approximation (RWA). The RWA breaks down in the ultra-strong coupling (USC) regime, where the effective coupling strength $g$ is comparable to the energy $ω$ of the bosonic mode, and remarkable features in the system dynamics are revealed. We demonstrate an analog quantum simulation of an effective quantum Rabi model in the USC regime, achieving a relative coupling ratio of $g/ω\sim 0.6$. The quantum hardware of the simulator is a superconducting circuit embedded in a cQED setup. We observe fast and periodic quantum state collapses and revivals of the initial qubit state, being the most distinct signature of the synthesized model.
△ Less
Submitted 4 October, 2017; v1 submitted 25 November, 2016;
originally announced November 2016.
-
Tunable $\varphi$ Josephson Junction ratchet
Authors:
R. Menditto,
H. Sickinger,
M. Weides,
H. Kohlstedt,
D. Koelle,
R. Kleiner,
E. Goldobin
Abstract:
We demonstrate experimentally the operation of a deterministic Josephson ratchet with tunable asymmetry. The ratchet is based on a $\varphi$ Josephson junction with a ferromagnetic barrier operating in the underdamped regime. The system is probed also under the action of an additional dc current, which acts as a counter force trying to stop the ratchet. Under these conditions the ratchet works aga…
▽ More
We demonstrate experimentally the operation of a deterministic Josephson ratchet with tunable asymmetry. The ratchet is based on a $\varphi$ Josephson junction with a ferromagnetic barrier operating in the underdamped regime. The system is probed also under the action of an additional dc current, which acts as a counter force trying to stop the ratchet. Under these conditions the ratchet works against the counter force, thus producing a non-zero output power. Finally, we estimate the efficiency of the $\varphi$ Josephson junction ratchet.
△ Less
Submitted 26 July, 2016;
originally announced July 2016.
-
Emulating the one-dimensional Fermi-Hubbard model by a double chain of qubits
Authors:
Jan-Michael Reiner,
Michael Marthaler,
Jochen Braumüller,
Martin Weides,
Gerd Schön
Abstract:
The Jordan-Wigner transformation maps a one-dimensional spin-1/2 system onto a fermionic model without spin degree of freedom. A double chain of quantum bits with XX and ZZ couplings of neighboring qubits along and between the chains, respectively, can be mapped on a spin-full 1D Fermi-Hubbard model. The qubit system can thus be used to emulate the quantum properties of this model. We analyze phys…
▽ More
The Jordan-Wigner transformation maps a one-dimensional spin-1/2 system onto a fermionic model without spin degree of freedom. A double chain of quantum bits with XX and ZZ couplings of neighboring qubits along and between the chains, respectively, can be mapped on a spin-full 1D Fermi-Hubbard model. The qubit system can thus be used to emulate the quantum properties of this model. We analyze physical implementations of such analog quantum simulators, including one based on transmon qubits, where the ZZ interaction arises due to an inductive coupling and the XX interaction due to a capacitive interaction. We propose protocols to gain confidence in the results of the simulation through measurements of local operators.
△ Less
Submitted 8 February, 2018; v1 submitted 17 February, 2016;
originally announced February 2016.
-
Concentric transmon qubit featuring fast tunability and an anisotropic magnetic dipole moment
Authors:
Jochen Braumüller,
Martin Sandberg,
Michael R. Vissers,
Andre Schneider,
Steffen Schlör,
Lukas Grünhaupt,
Hannes Rotzinger,
Michael Marthaler,
Alexander Lukashenko,
Amadeus Dieter,
Alexey V. Ustinov,
Martin Weides,
David P. Pappas
Abstract:
We present a planar qubit design based on a superconducting circuit that we call concentric transmon. While employing a straightforward fabrication process using Al evaporation and lift-off lithography, we observe qubit lifetimes and coherence times in the order of 10us. We systematically characterize loss channels such as incoherent dielectric loss, Purcell decay and radiative losses. The impleme…
▽ More
We present a planar qubit design based on a superconducting circuit that we call concentric transmon. While employing a straightforward fabrication process using Al evaporation and lift-off lithography, we observe qubit lifetimes and coherence times in the order of 10us. We systematically characterize loss channels such as incoherent dielectric loss, Purcell decay and radiative losses. The implementation of a gradiometric SQUID loop allows for a fast tuning of the qubit transition frequency and therefore for full tomographic control of the quantum circuit. Due to the large loop size, the presented qubit architecture features a strongly increased magnetic dipole moment as compared to conventional transmon designs. This renders the concentric transmon a promising candidate to establish a site-selective passive direct Z coupling between neighboring qubits, being a pending quest in the field of quantum simulation.
△ Less
Submitted 8 February, 2018; v1 submitted 26 September, 2015;
originally announced September 2015.
-
Multi-photon dressing of an anharmonic superconducting many-level quantum circuit
Authors:
Jochen Braumüller,
Joel Cramer,
Steffen Schlör,
Hannes Rotzinger,
Lucas Radtke,
Alexander Lukashenko,
** Yang,
Sebastian T. Skacel,
Sebastian Probst,
Michael Marthaler,
Lingzhen Guo,
Alexey V. Ustinov,
Martin Weides
Abstract:
We report on the investigation of a superconducting anharmonic multi-level circuit that is coupled to a harmonic readout resonator. We observe multi-photon transitions via virtual energy levels of our system up to the fifth excited state. The back-action of these higher-order excitations on our readout device is analyzed quantitatively and demonstrated to be in accordance with theoretical expect…
▽ More
We report on the investigation of a superconducting anharmonic multi-level circuit that is coupled to a harmonic readout resonator. We observe multi-photon transitions via virtual energy levels of our system up to the fifth excited state. The back-action of these higher-order excitations on our readout device is analyzed quantitatively and demonstrated to be in accordance with theoretical expectation. By applying a strong microwave drive we achieve multi-photon dressing within our anharmonic circuit which is dynamically coupled by a weak probe tone. The emerging higher-order Rabi sidebands and associated Autler-Townes splittings involving up to five levels of the investigated anharmonic circuit are observed. Experimental results are in good agreement with master equation simulations.
△ Less
Submitted 5 March, 2015; v1 submitted 13 October, 2014;
originally announced October 2014.
-
Efficient and robust analysis of complex scattering data under noise in microwave resonators
Authors:
S. Probst,
F. B. Song,
P. A. Bushev,
A. V. Ustinov,
M. Weides
Abstract:
Superconducting microwave resonators are reliable circuits widely used for detection and as test devices for material research. A reliable determination of their external and internal quality factors is crucial for many modern applications, which either require fast measurements or operate in the single photon regime with small signal to noise ratios. Here, we use the circle fit technique with dia…
▽ More
Superconducting microwave resonators are reliable circuits widely used for detection and as test devices for material research. A reliable determination of their external and internal quality factors is crucial for many modern applications, which either require fast measurements or operate in the single photon regime with small signal to noise ratios. Here, we use the circle fit technique with diameter correction and provide a step by step guide for implementing an algorithm for robust fitting and calibration of complex resonator scattering data in the presence of noise. The speedup and robustness of the analysis are achieved by employing an algebraic rather than an iterative fit technique for the resonance circle.
△ Less
Submitted 26 October, 2014; v1 submitted 13 October, 2014;
originally announced October 2014.
-
Aluminium-oxide wires for superconducting high kinetic inductance circuits
Authors:
H. Rotzinger,
S. T. Skacel,
M. Pfirrmann,
J. N. Voss,
J. Münzberg,
S. Probst,
P. Bushev,
M. P. Weides,
A. V. Ustinov,
J. E. Mooij
Abstract:
We investigate thin films of conducting aluminium-oxide, also known as granular aluminium, as a material for superconducting high quality, high kinetic inductance circuits. The films are deposited by an optimised reactive DC magnetron sputter process and characterised using microwave measurement techniques at milli-Kelvin temperatures. We show that, by precise control of the reactive sputter condi…
▽ More
We investigate thin films of conducting aluminium-oxide, also known as granular aluminium, as a material for superconducting high quality, high kinetic inductance circuits. The films are deposited by an optimised reactive DC magnetron sputter process and characterised using microwave measurement techniques at milli-Kelvin temperatures. We show that, by precise control of the reactive sputter conditions, a high room temperature sheet resistance and therefore high kinetic inductance at low temperatures can be obtained. For a coplanar waveguide resonator with 1.5\,k$Ω$ sheet resistance and a kinetic inductance fraction close to unity, we measure a quality factor in the order of 700\,000 at 20\,mK. Furthermore, we observe a sheet resistance reduction by gentle heat treatment in air. This behaviour is exploited to study the kinetic inductance change using the microwave response of a coplanar wave guide resonator. We find the correlation between the kinetic inductance and the sheet resistance to be in good agreement with theoretical expectations.
△ Less
Submitted 15 June, 2016; v1 submitted 19 August, 2014;
originally announced August 2014.
-
Advanced superconducting circuits and devices
Authors:
Martin Weides,
Hannes Rotzinger
Abstract:
Short review on advanced superconducting circuits and devices.
Short review on advanced superconducting circuits and devices.
△ Less
Submitted 2 April, 2014; v1 submitted 27 February, 2014;
originally announced February 2014.
-
The effect of normal metal layers in ferromagnetic Josephson junctions
Authors:
D. M. Heim,
N. G. Pugach,
M. Yu. Kupriyanov,
E. Goldobin,
D. Koelle,
R. Kleiner,
N. Ruppelt,
M. Weides,
H. Kohlstedt
Abstract:
Using the Usadel equation approach, we provide a compact formalism to calculate the critical current density of 21 different types of ferromagnetic (F) Josephson junctions containing insulating (I) and normal metal (N) layers in the weak link regions. In particular, we obtain that even a thin additional N layer may shift the 0-$π$ transitions to larger or smaller values of the thickness $d_F$ of t…
▽ More
Using the Usadel equation approach, we provide a compact formalism to calculate the critical current density of 21 different types of ferromagnetic (F) Josephson junctions containing insulating (I) and normal metal (N) layers in the weak link regions. In particular, we obtain that even a thin additional N layer may shift the 0-$π$ transitions to larger or smaller values of the thickness $d_F$ of the ferromagnet, depending on its conducting properties. For certain values of $d_F$, a 0-$π$ transition can even be achieved by changing only the N layer thickness. We use our model to fit experimental data of SIFS and SINFS tunnel junctions, where S is a superconducting electrode.
△ Less
Submitted 27 July, 2014; v1 submitted 2 October, 2013;
originally announced October 2013.
-
Memory cell based on a $\varphi$ Josephson junction
Authors:
E. Goldobin,
H. Sickinger,
M. Weides,
N. Ruppelt,
H. Kohlstedt,
R. Kleiner,
D. Koelle
Abstract:
The $\varphi$ Josephson junction has a doubly degenerate ground state with the Josephson phases $\pm\varphi$. We demonstrate the use of such a $\varphi$ Josephson junction as a memory cell (classical bit), where writing is done by applying a magnetic field and reading by applying a bias current. In the "store" state, the junction does not require any bias or magnetic field, but just needs to stay…
▽ More
The $\varphi$ Josephson junction has a doubly degenerate ground state with the Josephson phases $\pm\varphi$. We demonstrate the use of such a $\varphi$ Josephson junction as a memory cell (classical bit), where writing is done by applying a magnetic field and reading by applying a bias current. In the "store" state, the junction does not require any bias or magnetic field, but just needs to stay cooled for permanent storage of the logical bit. Straightforward integration with Rapid Single Flux Quantum logic is possible.
△ Less
Submitted 7 June, 2013;
originally announced June 2013.
-
Long-lived, radiation-suppressed superconducting quantum bit in a planar geometry
Authors:
Martin Sandberg,
Michael R. Vissers,
Tom Ohki,
Jiansong Gao,
Jose Aumentado,
Martin Weides,
David P. Pappas
Abstract:
We present a superconducting qubit design that is fabricated in a 2D geometry over a superconducting ground plane to enhance the lifetime. The qubit is coupled to a microstrip resonator for readout. The circuit is fabricated on a silicon substrate using low loss, stoichiometric titanium nitride for capacitor pads and small, shadow-evaporated aluminum/aluminum-oxide junctions. We observe qubit rela…
▽ More
We present a superconducting qubit design that is fabricated in a 2D geometry over a superconducting ground plane to enhance the lifetime. The qubit is coupled to a microstrip resonator for readout. The circuit is fabricated on a silicon substrate using low loss, stoichiometric titanium nitride for capacitor pads and small, shadow-evaporated aluminum/aluminum-oxide junctions. We observe qubit relaxation and coherence times ($T_1$ and $T_2$) of 11.7 $\pm$ 0.2 $μ$s and 8.7 $\pm$ 0.3 $μ$s, respectively. Calculations show that the proximity of the superconducting plane suppresses the otherwise high radiation loss of the qubit. A significant increase in $T_1$ is projected for a reduced qubit-to-superconducting plane separation.
△ Less
Submitted 8 November, 2012;
originally announced November 2012.
-
Characterization and In-situ Monitoring of Sub-stoichiometric Adjustable Tc Titanium Nitride Growth
Authors:
Michael R. Vissers,
Jiansong Gao,
Jeffrey S. Kline,
Martin Sandberg,
Martin P. Weides,
David S. Wisbey,
David P. Pappas
Abstract:
The structural and electrical properties of Ti-N films deposited by reactive sputtering depend on their growth parameters, in particular the Ar:N2 gas ratio. We show that the nitrogen percentage changes the crystallographic phase of the film progressively from pure α-Ti, through an α-Ti phase with interstitial nitrogen, to stoichiometric Ti2N, and through a substoichiometric TiNX to stoichiometric…
▽ More
The structural and electrical properties of Ti-N films deposited by reactive sputtering depend on their growth parameters, in particular the Ar:N2 gas ratio. We show that the nitrogen percentage changes the crystallographic phase of the film progressively from pure α-Ti, through an α-Ti phase with interstitial nitrogen, to stoichiometric Ti2N, and through a substoichiometric TiNX to stoichiometric TiN. These changes also affect the superconducting transition temperature, Tc, allowing, the superconducting properties to be tailored for specific applications. After decreasing from a Tc of 0.4 K for pure Ti down to below 50 mK at the Ti2N point, the Tc then increases rapidly up to nearly 5 K over a narrow range of nitrogen incorporation. This very sharp increase of Tc makes it difficult to control the properties of the film from wafer-to-wafer as well as across a given wafer to within acceptable margins for device fabrication. Here we show that the nitrogen composition and hence the superconductive properties are related to, and can be determined by, spectroscopic ellipsometry. Therefore, this technique may be used for process control and wafer screening prior to investing time in processing devices.
△ Less
Submitted 20 September, 2012;
originally announced September 2012.
-
$T_1$-Echo Sequence - Protecting the state of a qubit in the presence of coherent interaction
Authors:
Clemens Müller,
Alexander Shnirman,
Martin Weides
Abstract:
We propose a sequence of pulses intended to preserve the state of a qubit in the presence of strong, coherent coupling to another quantum system. The sequence can be understood as a generalized SWAP and works in formal analogy to the well-known spin echo. Since the resulting effective decoherence rate of the qubits state is strongly influenced by the additional system, this sequence might serve to…
▽ More
We propose a sequence of pulses intended to preserve the state of a qubit in the presence of strong, coherent coupling to another quantum system. The sequence can be understood as a generalized SWAP and works in formal analogy to the well-known spin echo. Since the resulting effective decoherence rate of the qubits state is strongly influenced by the additional system, this sequence might serve to protect its quantum state as well as negating the effects of the coherent coupling. A possible area of application are large scale quantum computing architectures, where spectral crowding of the resources might necessitate a method to mitigate residual couplings.
△ Less
Submitted 26 September, 2012; v1 submitted 16 July, 2012;
originally announced July 2012.
-
Experimental evidence of a φ Josephson junction
Authors:
H. Sickinger,
A. Lipman,
M. Weides,
R. G. Mints,
H. Kohlstedt,
D. Koelle,
R. Kleiner,
E. Goldobin
Abstract:
We demonstrate experimentally the existence of Josephson junctions having a doubly degenerate ground state with an average Josephson phase ψ=\pmφ. The value of φ can be chosen by design in the interval 0<φ<π. The junctions used in our experiments are fabricated as 0-π Josephson junctions of moderate normalized length with asymmetric 0 and π regions. We show that (a) these φ Josephson junctions hav…
▽ More
We demonstrate experimentally the existence of Josephson junctions having a doubly degenerate ground state with an average Josephson phase ψ=\pmφ. The value of φ can be chosen by design in the interval 0<φ<π. The junctions used in our experiments are fabricated as 0-π Josephson junctions of moderate normalized length with asymmetric 0 and π regions. We show that (a) these φ Josephson junctions have two critical currents, corresponding to the escape of the phase ψ from -φ and +φ states; (b) the phase ψ can be set to a particular state by tuning an external magnetic field or (c) by using a proper bias current sweep sequence. The experimental observations are in agreement with previous theoretical predictions.
△ Less
Submitted 12 July, 2012;
originally announced July 2012.
-
Etch Induced Microwave Losses in Titanium Nitride Superconducting Resonators
Authors:
Martin Sandberg,
Michael R. Vissers,
Jeffrey S. Kline,
Martin Weides,
Jiansong Gao,
David S. Wisbey,
David P. Pappas
Abstract:
We have investigated the correlation between the microwave loss and patterning method for coplanar waveguide titanium nitride resonators fabricated on Si wafers. Three different methods were investigated: fluorine- and chlorine-based reactive ion etches and an argon-ion mill. At high microwave probe powers the reactive etched resonators showed low internal loss, whereas the ion-milled samples show…
▽ More
We have investigated the correlation between the microwave loss and patterning method for coplanar waveguide titanium nitride resonators fabricated on Si wafers. Three different methods were investigated: fluorine- and chlorine-based reactive ion etches and an argon-ion mill. At high microwave probe powers the reactive etched resonators showed low internal loss, whereas the ion-milled samples showed dramatically higher loss. At single-photon powers we found that the fluorine-etched resonators exhibited substantially lower loss than the chlorine-etched ones. We interpret the results by use of numerically calculated filling factors and find that the silicon surface exhibits a higher loss when chlorine-etched than when fluorine-etched. We also find from microscopy that re-deposition of silicon onto the photoresist and side walls is the probable cause for the high loss observed for the ion-milled resonators
△ Less
Submitted 14 May, 2012;
originally announced May 2012.