Showing 1–6 of 6 results for author: Weidemann, A W

The Physics of the B Factories

Authors: A. J. Bevan, B. Golob, Th. Mannel, S. Prell, B. D. Yabsley, K. Abe, H. Aihara, F. Anulli, N. Arnaud, T. Aushev, M. Beneke, J. Beringer, F. Bianchi, I. I. Bigi, M. Bona, N. Brambilla, J. B rodzicka, P. Chang, M. J. Charles, C. H. Cheng, H. -Y. Cheng, R. Chistov, P. Colangelo, J. P. Coleman, A. Drutskoy , et al. (2009 additional authors not shown)

Abstract: This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary… ▽ More This work is on the Physics of the B Factories. Part A of this book contains a brief description of the SLAC and KEK B Factories as well as their detectors, BaBar and Belle, and data taking related issues. Part B discusses tools and methods used by the experiments in order to obtain results. The results themselves can be found in Part C. Please note that version 3 on the archive is the auxiliary version of the Physics of the B Factories book. This uses the notation alpha, beta, gamma for the angles of the Unitarity Triangle. The nominal version uses the notation phi_1, phi_2 and phi_3. Please cite this work as Eur. Phys. J. C74 (2014) 3026. △ Less

Submitted 31 October, 2015; v1 submitted 24 June, 2014; originally announced June 2014.

Comments: 928 pages, version 3 (arXiv:1406.6311v3) corresponds to the alpha, beta, gamma version of the book, the other versions use the phi1, phi2, phi3 notation

Report number: SLAC-PUB-15968, KEK Preprint 2014-3

Journal ref: Eur. Phys. J. C74 (2014) 3026

Using Geant4 in the BaBar Simulation

Authors: BaBar Collaboration, D. H. Wright, D. Aston, M. L. Kocian, H. Marsiske, W. S. Lockman, D. C. Williams, A. W. Weidemann, J. R. Wilson, T. B. Moore, A. J. Lyon

Abstract: Babar was the first large experiment to incorporate Geant4 into its detector simulation. Since July 2001, 1.5 billion Babar events have been produced using this simulation. In a typical e+e- -> Upsilon(4s) -> B0 B0bar event, between 30 and 60 tracks are produced in the generator and propagated through the detector, using decay, electromagnetic and hadronic processes provided by the Geant4 toolki… ▽ More Babar was the first large experiment to incorporate Geant4 into its detector simulation. Since July 2001, 1.5 billion Babar events have been produced using this simulation. In a typical e+e- -> Upsilon(4s) -> B0 B0bar event, between 30 and 60 tracks are produced in the generator and propagated through the detector, using decay, electromagnetic and hadronic processes provided by the Geant4 toolkit. The material model of the detector is very detailed and a special particle transportation module was developed so that minute features (on the few micron scale) would be sampled in the propagation without sacrificing performance. The propagation phase for such an event requires 5 CPU seconds on an 866 MHz processor. Execution speeds for other Babar event types will also be presented. Validation of simulated events with Babar data is ongoing, and results of Monte Carlo/data comparisons will be shown. A discussion of the design of the simulation code, how the Geant4 toolkit is used, and ongoing efforts to improve the agreement between data and Monte Carlo will also be presented. △ Less

Submitted 21 May, 2003; originally announced May 2003.

Comments: 2003 Computing in High Energy and Nuclear Physics Conference (CHEP03), SLAC-PUB-9862, 7 pages, 6 figures

A Resonant Cavity for Single-Shot Emittance Measurement

Authors: J. S. Kim, C. D. Nantista, D. H. Whittum, R. H. Miller, S. G. Tantawi, A. W. Weidemann

Abstract: We present a non-invasive, resonant cavity based approach to beam emittance measurement of a shot-to-shot non-circular beam pulse of multi-bunches. In a resonant cavity, desired field components can be enhanced up to Q_L_lambda/pi, where Q_L_lambda is the loaded Q of the resonance mode lambda, when the cavity resonant mode matches with the beam operating frequency. In particular, a Quad-cavity,… ▽ More We present a non-invasive, resonant cavity based approach to beam emittance measurement of a shot-to-shot non-circular beam pulse of multi-bunches. In a resonant cavity, desired field components can be enhanced up to Q_L_lambda/pi, where Q_L_lambda is the loaded Q of the resonance mode lambda, when the cavity resonant mode matches with the beam operating frequency. In particular, a Quad-cavity, with its quadrupole mode at beam operating frequency, extracts the beam quad-moment exclusively, utilizing the symmetry of the cavity and some simple networks to suppress common modes. Six successive beam quadrupole moment measurements, performed at different betatron phases in a linear transport system, allow us to determine the beam emittance, i.e., the beam size and shape in the beam's phase space. One measurement alone provides the rms-beam size if the beam position is given, for instance, by nearby beam-position-monitors. This paper describes the basic design and analysis of a Quad-cavity beam monitoring system. △ Less

Submitted 18 September, 2002; originally announced September 2002.

Comments: 3 pages, 6 figures, presented at the IEEE Particle Accelerator Conference (PAC2001), Chicago, IL, June 18-22, 2001

Report number: SLAC-PUB-9420

Journal ref: Conf.Proc.C0106181:1345-1347,2001

Plasma Lens Backgrounds at a Future Linear Collider

Authors: Achim W. Weidemann, Pisin Chen, Cho-Kuen Ng

Abstract: A 'plasma lens' might be used to enhance the luminosity of future linear colliders. However, its utility for this purpose depends largely on the potential backgrounds that may be induced by the insertion of such a device in the interaction region of the detector. In this note we identify different sources of such backgrounds, calculate their event rates from the elementary interaction processes,… ▽ More A 'plasma lens' might be used to enhance the luminosity of future linear colliders. However, its utility for this purpose depends largely on the potential backgrounds that may be induced by the insertion of such a device in the interaction region of the detector. In this note we identify different sources of such backgrounds, calculate their event rates from the elementary interaction processes, and evaluate their effects on the major parts of a hypothetical Next Linear Collider (NLC) detector. For plasma lens parameters which give a factor of seven enhancement of the luminosity, and using the NLC design for beam parameters as a reference, we find that the background yields are fairly high, and require further study and improvements in detector technology to avoid their impact. △ Less

Submitted 30 April, 2002; originally announced May 2002.

Comments: 14 pages incl. 3 figures; contributed to the 4th International Workshop, Electron-Electron Interactions at TeV Energies, Santa Cruz, California, Dec. 7 - 9, 2001. To be published in Int.Journ. Mod. Phys. A

Report number: SLAC-PUB-9207

Journal ref: Int.J.Mod.Phys. A18 (2003) 2857-2870

Observation of Plasma Focusing of a 28.5 GeV Positron Beam

Authors: J. S. T. Ng, P. Chen, H. Baldis, P. Bolton, D. Cline, W. Craddock, C. Crawford, F. J. Decker, C. Field, Y. Fukui, V. Kumar, R. Iverson, F. King, R. E. Kirby, K. Nakajima, R. Noble, A. Ogata, P. Raimondi, D. Walz, A. W. Weidemann

Abstract: The observation of plasma focusing of a 28.5 GeV positron beam is reported. The plasma was formed by ionizing a nitrogen jet only 3 mm thick. Simultaneous focusing in both transverse dimensions was observed with effective focusing strengths of order Tesla per micron. The minimum area of the beam spot was reduced by a factor of 2.0 +/- 0.3 by the plasma. The longitudinal beam envelope was measure… ▽ More The observation of plasma focusing of a 28.5 GeV positron beam is reported. The plasma was formed by ionizing a nitrogen jet only 3 mm thick. Simultaneous focusing in both transverse dimensions was observed with effective focusing strengths of order Tesla per micron. The minimum area of the beam spot was reduced by a factor of 2.0 +/- 0.3 by the plasma. The longitudinal beam envelope was measured and compared with numerical calculations. △ Less

Submitted 4 October, 2001; originally announced October 2001.

Report number: SLAC-PUB-8975

Journal ref: Phys.Rev.Lett. 87 (2001) 244801

Results on Plasma Focusing of High Energy Density Electron and Positron Beams

Authors: J. S. T. Ng, P. Chen, W. Craddock, F. J. Decker, R. C. Field, M. J. Hogan, R. Iverson, F. King, R. E. Kirby, T. Kotseroglou, P. Raimondi, D. Walz, H. A. Baldis, P. Bolton, D. Cline, Y. Fukui, V. Kumar, C. Crawford, R. Noble, K. Nakajima, A. Ogata, A. W. Weidemann

Abstract: We present results from the SLAC E-150 experiment on plasma focusing of high energy density electron and, for the first time, positron beams. We also discuss measurements on plasma lens-induced synchrotron radiation, longitudinal dynamics of plasma focusing, and laser- and beam-plasma interactions. We present results from the SLAC E-150 experiment on plasma focusing of high energy density electron and, for the first time, positron beams. We also discuss measurements on plasma lens-induced synchrotron radiation, longitudinal dynamics of plasma focusing, and laser- and beam-plasma interactions. △ Less

Submitted 18 August, 2000; originally announced August 2000.

Comments: LINAC 2000 paper No. THC13, Monterey, CA. Aug.21-25,2000, 3 pages, 2 figures

Report number: SLAC-PUB-8567

Journal ref: eConf C000821 (2000) THc13