Showing 1–34 of 34 results for author: Weber, K

Evidence of the quantum-optical nature of high-harmonic generation

Authors: David Theidel, Viviane Cotte, René Sondenheimer, Viktoriia Shiriaeva, Marie Froidevaux, Vladislav Severin, Philip Mosel, Adam Merdji-Larue, Sven Fröhlich, Kim-Alessandro Weber, Uwe Morgner, Milutin Kovacev, Jens Biegert, Hamed Merdji

Abstract: High-harmonic generation is a light up-conversion process occurring in a strong laser field, leading to coherent bursts of extreme ultrashort broadband radiation [1]. As a new perspective, we propose that ultrafast strong-field electronic or photonic processes such as high-harmonic generation can potentially generate non-classical states of light well before the decoherence of the system occurs [2… ▽ More High-harmonic generation is a light up-conversion process occurring in a strong laser field, leading to coherent bursts of extreme ultrashort broadband radiation [1]. As a new perspective, we propose that ultrafast strong-field electronic or photonic processes such as high-harmonic generation can potentially generate non-classical states of light well before the decoherence of the system occurs [2, 3]. This could address fundamental challenges in quantum technology such as scalability, decoherence or the generation of massively entangled states [4]. Here, we report experimental evidence of the non-classical nature of the harmonic emission in several semiconductors excited by a femtosecond infrared laser. By investigating single- and double beam intensity cross-correlation [5], we measure characteristic, non-classical features in the single photon statistics. We observe two-mode squeezing in the generated harmonic radiation, which depends on the laser intensity that governs the transition from Super-Poissonian to Poissonian photon statistics. The measured violation of the Cauchy-Schwarz inequality realizes a direct test of multipartite entanglement in high-harmonic generation [6]. This result is supported by the theory of multimodal detection and the Hamiltonian from which the effective squeezing modes of the harmonics can be derived [7, 8]. With this work, we show experimentally that high-harmonic generation is a new quantum bosonic platform that intrinsically produces non-classical states of light with unique features such as multipartite broadband entanglement or multimode squeezing. The source operates at room temperature using standard semiconductors and a standard commercial fiber laser, opening new routes for the quantum industry, such as optical quantum computing, communication and imaging. △ Less

Submitted 6 June, 2024; v1 submitted 23 May, 2024; originally announced May 2024.

Comments: 39 pages, 11 figures

A compact and open-source microcontroller-based rapid auto-alignment system

Authors: Yanda Geng, Alan Tsidilkovski, Kevin Weber, Shouvik Mukherjee, Alessandro Restelli, Sarthak Subhankar

Abstract: Maintaining stable and precise alignment of a laser beam is crucial in many optical setups. In this work, we present a microcontroller-based rapid auto-alignment system that detects and corrects for drifts in a laser beam trajectory using a pair of two-dimensional duo-lateral position sensing detectors (PSDs) and a pair of mirror mounts with piezoelectric actuators. We develop hardware and softwar… ▽ More Maintaining stable and precise alignment of a laser beam is crucial in many optical setups. In this work, we present a microcontroller-based rapid auto-alignment system that detects and corrects for drifts in a laser beam trajectory using a pair of two-dimensional duo-lateral position sensing detectors (PSDs) and a pair of mirror mounts with piezoelectric actuators. We develop hardware and software for interfacing with the PSDs and for controlling the motion of the piezoelectric mirrors mounts. Our auto-alignment strategy -- implemented as a state machine on the microcontroller by a FreeRTOS kernel -- is based on a simple linearized geometrical optical model. We benchmark our system using the standard case of coupling laser light efficiently into the guided mode of a single-mode fiber optic patch cable. We can recover the maximum fiber coupling efficiency in $\sim10$ seconds, even for a laser beam that was misaligned to the point of zero fiber coupling. △ Less

Submitted 22 March, 2024; originally announced May 2024.

Comments: 6 pages, 5 figures

Physics-based material parameters extraction from perovskite experiments via Bayesian optimization

Authors: Hualin Zhan, Viqar Ahmad, Azul Mayon, Grace Tabi, Anh Dinh Bui, Zhuofeng Li, Daniel Walter, Hieu Nguyen, Klaus Weber, Thomas White, Kylie Catchpole

Abstract: The ability to extract material parameters of perovskite from quantitative experimental analysis is essential for rational design of photovoltaic and optoelectronic applications. However, the difficulty of this analysis increases significantly with the complexity of the theoretical model and the number of material parameters for perovskite. Here we use Bayesian optimization to develop an analysis… ▽ More The ability to extract material parameters of perovskite from quantitative experimental analysis is essential for rational design of photovoltaic and optoelectronic applications. However, the difficulty of this analysis increases significantly with the complexity of the theoretical model and the number of material parameters for perovskite. Here we use Bayesian optimization to develop an analysis platform that can extract up to 8 fundamental material parameters of an organometallic perovskite semiconductor from a transient photoluminescence experiment, based on a complex full physics model that includes drift-diffusion of carriers and dynamic defect occupation. An example study of thermal degradation reveals that the carrier mobility and trap-assisted recombination coefficient are reduced noticeably, while the defect energy level remains nearly unchanged. The reduced carrier mobility can dominate the overall effect on thermal degradation of perovskite solar cells by reducing the fill factor, despite the opposite effect of the reduced trap-assisted recombination coefficient on increasing the fill factor. In future, this platform can be conveniently applied to other experiments or to combinations of experiments, accelerating materials discovery and optimization of semiconductor materials for photovoltaics and other applications. △ Less

Submitted 29 May, 2024; v1 submitted 16 February, 2024; originally announced February 2024.

Comments: The work is published in Energy & Environmental Science (DOI: 10.1039/D4EE00911H). This work is supported by the Australian Centre for Advanced Photovoltaics (ACAP) and received funding from the Australian Renewable Energy Agency (ARENA). H.Z. acknowledges the support of the ACAP Fellowship. H.Z. thanks Pawsey for providing the Nimbus Research Cloud Service

Beamfit: Algorithmic Wavefront Reconstruction of Laser Beams Using Multiple Intensity Images and Laguerre- or Hermite-Gaussian Basis

Authors: Kevin Weber, Jonathan Joseph Carter, Sina Maria Koehlenbeck, Gudrun Wanner, Gerhard Heinzel

Abstract: Wavefront errors are a common artifact in laser light generation and imaging. They can be described as an aberration from the spherical wavefront of an ideal Gaussian beam by combinations of higher-order Hermite- or Laguerre-Gaussian terms. Here, we present an algorithm called Beamfit to estimate the mode composition from a series of CCD images taken over the Rayleigh range of a laser beam. The al… ▽ More Wavefront errors are a common artifact in laser light generation and imaging. They can be described as an aberration from the spherical wavefront of an ideal Gaussian beam by combinations of higher-order Hermite- or Laguerre-Gaussian terms. Here, we present an algorithm called Beamfit to estimate the mode composition from a series of CCD images taken over the Rayleigh range of a laser beam. The algorithm uses a user-defined set of Hermite- or Laguerre-Gaussian modes as the basis of its theoretical model. A novel method reduces the number of calculations needed to compute the model's intensity profiles. For a given model containing $N$ modes, the number of Hermite-Gaussian complex amplitudes needed to calculate are reduced from orders of $\mathcal{O}(N^2)$ to $\mathcal{O}(N)$ and replaced by simple multiplications. Additionally, non-beam parameters are pre-calculated to further reduce the search space dimension and its resulting calculation time. It is planned to release the Beamfit software to the public under an open-source license. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Comments: 13 pages, 5 figures

Towards contrast-agnostic soft segmentation of the spinal cord

Authors: Sandrine Bédard, Naga Karthik Enamundram, Charidimos Tsagkas, Emanuele Pravatà, Cristina Granziera, Andrew Smith, Kenneth Arnold Weber II, Julien Cohen-Adad

Abstract: Spinal cord segmentation is clinically relevant and is notably used to compute spinal cord cross-sectional area (CSA) for the diagnosis and monitoring of cord compression or neurodegenerative diseases such as multiple sclerosis. While several semi and automatic methods exist, one key limitation remains: the segmentation depends on the MRI contrast, resulting in different CSA across contrasts. This… ▽ More Spinal cord segmentation is clinically relevant and is notably used to compute spinal cord cross-sectional area (CSA) for the diagnosis and monitoring of cord compression or neurodegenerative diseases such as multiple sclerosis. While several semi and automatic methods exist, one key limitation remains: the segmentation depends on the MRI contrast, resulting in different CSA across contrasts. This is partly due to the varying appearance of the boundary between the spinal cord and the cerebrospinal fluid that depends on the sequence and acquisition parameters. This contrast-sensitive CSA adds variability in multi-center studies where protocols can vary, reducing the sensitivity to detect subtle atrophies. Moreover, existing methods enhance the CSA variability by training one model per contrast, while also producing binary masks that do not account for partial volume effects. In this work, we present a deep learning-based method that produces soft segmentations of the spinal cord. Using the Spine Generic Public Database of healthy participants ($\text{n}=267$; $\text{contrasts}=6$), we first generated participant-wise soft ground truth (GT) by averaging the binary segmentations across all 6 contrasts. These soft GT, along with a regression-based loss function, were then used to train a UNet model for spinal cord segmentation. We evaluated our model against state-of-the-art methods and performed ablation studies involving different GT mask types, loss functions, and contrast-specific models. Our results show that using the soft average segmentations along with a regression loss function reduces CSA variability ($p < 0.05$, Wilcoxon signed-rank test). The proposed spinal cord segmentation model generalizes better than the state-of-the-art contrast-specific methods amongst unseen datasets, vendors, contrasts, and pathologies (compression, lesions), while accounting for partial volume effects. △ Less

Submitted 23 October, 2023; originally announced October 2023.

Comments: Submitted to Medical Image Analysis

The DECam Ecliptic Exploration Project (DEEP): V. The Absolute Magnitude Distribution of the Cold Classical Kuiper Belt

Authors: Kevin J. Napier, Hsing-Wen Lin, David W. Gerdes, Fred C. Adams, Anna M. Simpson, Matthew W. Porter, Katherine G. Weber, Larissa Markwardt, Gabriel Gowman, Hayden Smotherman, Pedro H. Bernardinelli, Mario Jurić, Andrew J. Connolly, J. Bryce Kalmbach, Stephen K. N. Portillo, David E. Trilling, Ryder Strauss, William J. Oldroyd, Chadwick A. Trujillo, Colin Orion Chandler, Matthew J. Holman, Hilke E. Schlichting, Andrew McNeill, the DEEP Collaboration

Abstract: The DECam Ecliptic Exploration Project (DEEP) is a deep survey of the trans-Neptunian solar system being carried out on the 4-meter Blanco telescope at Cerro Tololo Inter-American Observatory in Chile using the Dark Energy Camera (DECam). By using a shift-and-stack technique to achieve a mean limiting magnitude of $r \sim 26.2$, DEEP achieves an unprecedented combination of survey area and depth,… ▽ More The DECam Ecliptic Exploration Project (DEEP) is a deep survey of the trans-Neptunian solar system being carried out on the 4-meter Blanco telescope at Cerro Tololo Inter-American Observatory in Chile using the Dark Energy Camera (DECam). By using a shift-and-stack technique to achieve a mean limiting magnitude of $r \sim 26.2$, DEEP achieves an unprecedented combination of survey area and depth, enabling quantitative leaps forward in our understanding of the Kuiper Belt populations. This work reports results from an analysis of twenty 3 sq.\ deg.\ DECam fields along the invariable plane. We characterize the efficiency and false-positive rates for our moving-object detection pipeline, and use this information to construct a Bayesian signal probability for each detected source. This procedure allows us to treat all of our Kuiper Belt Object (KBO) detections statistically, simultaneously accounting for efficiency and false positives. We detect approximately 2300 candidate sources with KBO-like motion at S/N $>6.5$. We use a subset of these objects to compute the luminosity function of the Kuiper Belt as a whole, as well as the Cold Classical (CC) population. We also investigate the absolute magnitude ($H$) distribution of the CCs, and find consistency with both an exponentially tapered power-law, which is predicted by streaming instability models of planetesimal formation, and a rolling power law. Finally, we provide an updated mass estimate for the Cold Classical Kuiper Belt of $M_{CC}(H_r < 12) = 0.0017^{+0.0010}_{-0.0004} M_{\oplus}$, assuming albedo $p = 0.15$ and density $ρ= 1$ g cm$^{-3}$. △ Less

Submitted 18 September, 2023; originally announced September 2023.

Comments: Accepted by PSJ

Cavity-mediated long-range interactions in levitated optomechanics

Authors: Jayadev Vijayan, Johannes Piotrowski, Carlos Gonzalez-Ballestero, Kevin Weber, Oriol Romero-Isart, Lukas Novotny

Abstract: The ability to engineer cavity-mediated interactions has emerged as a powerful tool for the generation of non-local correlations and the investigation of non-equilibrium phenomena in many-body systems. Levitated optomechanical systems have recently entered the multi-particle regime, with promise for using arrays of massive strongly coupled oscillators for exploring complex interacting systems and… ▽ More The ability to engineer cavity-mediated interactions has emerged as a powerful tool for the generation of non-local correlations and the investigation of non-equilibrium phenomena in many-body systems. Levitated optomechanical systems have recently entered the multi-particle regime, with promise for using arrays of massive strongly coupled oscillators for exploring complex interacting systems and sensing. Here, by combining advances in multi-particle optical levitation and cavity-based quantum control, we demonstrate, for the first time, programmable cavity-mediated interactions between nanoparticles in vacuum. The interaction is mediated by photons scattered by spatially separated particles in a cavity, resulting in strong coupling ($G_\text{zz}/Ω_\text{z} = 0.238\pm0.005$) that does not decay with distance within the cavity mode volume. We investigate the scaling of the interaction strength with cavity detuning and inter-particle separation, and demonstrate the tunability of interactions between different mechanical modes. Our work paves the way towards exploring many-body effects in nanoparticle arrays with programmable cavity-mediated interactions, generating entanglement of motion, and using interacting particle arrays for optomechanical sensing. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Comments: 7 pages, 4 figures, 4 pages in Supplementary, 3 figures in Supplementary

Fostering User Engagement in the Critical Reflection of Arguments

Authors: Klaus Weber, Annalena Aicher, Wolfang Minker, Stefan Ultes, Elisabeth André

Abstract: A natural way to resolve different points of view and form opinions is through exchanging arguments and knowledge. Facing the vast amount of available information on the internet, people tend to focus on information consistent with their beliefs. Especially when the issue is controversial, information is often selected that does not challenge one's beliefs. To support a fair and unbiased opinion-b… ▽ More A natural way to resolve different points of view and form opinions is through exchanging arguments and knowledge. Facing the vast amount of available information on the internet, people tend to focus on information consistent with their beliefs. Especially when the issue is controversial, information is often selected that does not challenge one's beliefs. To support a fair and unbiased opinion-building process, we propose a chatbot system that engages in a deliberative dialogue with a human. In contrast to persuasive systems, the envisioned chatbot aims to provide a diverse and representative overview - embedded in a conversation with the user. To account for a reflective and unbiased exploration of the topic, we enable the system to intervene if the user is too focused on their pre-existing opinion. Therefore we propose a model to estimate the users' reflective engagement (RUE), defined as their critical thinking and open-mindedness. We report on a user study with 58 participants to test our model and the effect of the intervention mechanism, discuss the implications of the results, and present perspectives for future work. The results show a significant effect on both user reflection and total user focus, proving our proposed approach's validity. △ Less

Submitted 17 August, 2023; originally announced August 2023.

Comments: 16 pages, 5 figures

Interplay of structure and magnetism in LuFe4Ge2 tuned by hydrostatic pressure

Authors: M. O. Ajeesh, P. Materne, R. D. dos Reis, K. Weber, S. Dengre, R. Sarkar, R. Khasanov, I. Kraft, A. M. León, W. Bi, J. Zhao, E. E. Alp, S. Medvedev, V. Ksenofontov, H. Rosner, H. -H. Klauss, C. Geibel, M. Nicklas

Abstract: LuFe$_4$Ge$_2$ crystallizes in the ZrFe$_4$Si$_2$-type structure, hosting chains of Fe-tetrahedra giving rise to geometric frustration and low-dimensionality. The compound orders antiferromagnetically at around 36 K accompanied by a simultaneous structural transition from a tetragonal to an orthorhombic phase. The hydrostatic pressure dependence of the magnetic and structural transitions is invest… ▽ More LuFe$_4$Ge$_2$ crystallizes in the ZrFe$_4$Si$_2$-type structure, hosting chains of Fe-tetrahedra giving rise to geometric frustration and low-dimensionality. The compound orders antiferromagnetically at around 36 K accompanied by a simultaneous structural transition from a tetragonal to an orthorhombic phase. The hydrostatic pressure dependence of the magnetic and structural transitions is investigated using electrical-transport, ac magnetic-susceptibility, ac calorimetry, M$\ddot{\rm o}$ssbauer, muon-spin relaxation ($μ$SR), and x-ray diffraction measurements. External pressure suppresses the first-order transition to the antiferromagnetic phase (AFM1) around 1.8 GPa. The structural transition is largely unaffected by pressure and remains between 30 to 35 K for pressures up to 2 GPa. A second antiferromagnetic phase (AFM2) is observed at higher pressures. The transition from the paramagnetic to the AFM2 phase is of second-order nature and appears to be connected to the structural transition. The magnetic volume fraction obtained from $μ$SR and M$\ddot{\rm o}$ssbauer measurements reveal that the entire sample undergoes magnetic ordering in both magnetic phases. In addition, similar low-temperature muon-precession frequencies in AFM1 and AFM2 phases point at similar ordered moments and magnetic structures in both phases. Our results further indicate enhanced magnetic fluctuations in the pressure induced AFM2 phase. The experimental observations together with density functional theory calculations suggest that the magnetic and structural order parameters in LuFe$_4$Ge$_2$ are linked by magnetic frustration, causing the simultaneous magneto-structural transition. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: 9 pages, 8 figures

Journal ref: Phys. Rev. B 107, 125136 (2023)

Laser written mirror profiles for open-access fiber Fabry-Pérot microcavities

Authors: Jannis Hessenauer, Ksenia Weber, Julia Benedikter, Timo Gissibl, Johannes Höfer, Harald Giessen, David Hunger

Abstract: We demonstrate laser-written concave hemispherical structures produced on the endfacets of optical fibers that serve as mirror substrates for tunable open-access microcavities. We achieve finesse values of up to 250, and a mostly constant performance across the entire stability range. This enables cavity operation also close to the stability limit, where a peak quality factor of $1.5\times 10^4$ i… ▽ More We demonstrate laser-written concave hemispherical structures produced on the endfacets of optical fibers that serve as mirror substrates for tunable open-access microcavities. We achieve finesse values of up to 250, and a mostly constant performance across the entire stability range. This enables cavity operation also close to the stability limit, where a peak quality factor of $1.5\times 10^4$ is reached. Together with a small mode waist of $2.3\; \mathrm{μm}$, the cavity achieves a Purcell factor of $C \sim 2.5$, which is useful for experiments that require good lateral optical access or otherwise large separation of the mirrors. Laser-written mirror profiles can be produced with a tremendous flexibility in shape and on various surfaces, opening new possibilities for microcavities. △ Less

Submitted 25 November, 2022; originally announced November 2022.

Comments: 8 pages, 3 figures

Method comparison for simulating non-Gaussian Beams and Diffraction for Precision Interferometry

Authors: Mengyuan Zhao, Yazheng Tao, Kevin Weber, Tim Haase, Sönke Schuster, Zhenxiang Hao, Gudrun Wanner

Abstract: In the context of simulating precision laser interferometers, we compare via several examples two wavefront decomposition methods: the Mode Expansion Method (MEM) and the Gaussian beam decomposition (GBD) for their precision and applicability. To judge the performance of these methods, we define different types of errors and study their properties. We specify how the two methods can be fairly comp… ▽ More In the context of simulating precision laser interferometers, we compare via several examples two wavefront decomposition methods: the Mode Expansion Method (MEM) and the Gaussian beam decomposition (GBD) for their precision and applicability. To judge the performance of these methods, we define different types of errors and study their properties. We specify how the two methods can be fairly compared and based on that, the quality of the MEM and GBD are compared in several examples. We test here cases for which analytic results are available, i.e., non-clipped circular and general astigmatic Gaussian beams, as well as clipped circular Gaussian beams, in the near-, far-, and extreme far-field of millions of kilometers occurring in space-gravitational wave detectors. Additionally, we compare the methods for aberrated wavefronts and the interaction with optical components by testing reflections from differently curved mirrors. We find that both methods can be generally used for decomposing non-Gaussian beams. However, which method is more accurate depends on the optical system and simulation settings. In the given examples, the MEM more accurately describes non-clipped Gaussian beams, while for clipped Gaussian beams and the interaction with surfaces, the GBD is more precise. △ Less

Submitted 16 June, 2023; v1 submitted 13 October, 2022; originally announced October 2022.

The Future Quantum Workforce: Competences, Requirements and Forecasts

Authors: Franziska Greinert, Rainer Müller, Philipp Bitzenbauer, Malte S. Ubben, Kim-Alessandro Weber

Abstract: With the increasing industrial relevance of new quantum technologies, a well educated quantum workforce becomes increasingly crucial. The foreseeable lack of workforce raises important questions. What are the expectations regarding the future relevance of second generation quantum technologies? What are the requirements for the workforce in the coming quantum industry? Which competences, knowledge… ▽ More With the increasing industrial relevance of new quantum technologies, a well educated quantum workforce becomes increasingly crucial. The foreseeable lack of workforce raises important questions. What are the expectations regarding the future relevance of second generation quantum technologies? What are the requirements for the workforce in the coming quantum industry? Which competences, knowledge and skills should the future employees have? In this paper, we report the results of our study that was aimed at map** requirements and forecasts for the future quantum workforce. Our study consisted of three consecutive survey rounds. In total, we gathered $188$ responses from industry and academic experts across Europe. Our study results served as an input for the development of the European Competence Framework for Quantum Technologies, delivered by the project QTEdu CSA for the European Quantum Flagship. In addition, we will discuss predictions from experts related to the future quantum workforce, including the expected industrial relevance of the main areas of quantum technologies, the need for educational efforts, and the expected influence of quantum technologies on everyday life. △ Less

Submitted 13 April, 2023; v1 submitted 17 August, 2022; originally announced August 2022.

Comments: 19 pages, 10 figures; reviewed version to be published in Phys. Rev. Phys. Educ. Res

Journal ref: Phys. Rev. Phys. Educ. Res. 19, 010137, 5 June 2023

In-Pocket 3D Graphs Enhance Ligand-Target Compatibility in Generative Small-Molecule Creation

Authors: Seung-gu Kang, Jeffrey K. Weber, Joseph A. Morrone, Leili Zhang, Tien Huynh, Wendy D. Cornell

Abstract: Proteins in complex with small molecule ligands represent the core of structure-based drug discovery. However, three-dimensional representations are absent from most deep-learning-based generative models. We here present a graph-based generative modeling technology that encodes explicit 3D protein-ligand contacts within a relational graph architecture. The models combine a conditional variational… ▽ More Proteins in complex with small molecule ligands represent the core of structure-based drug discovery. However, three-dimensional representations are absent from most deep-learning-based generative models. We here present a graph-based generative modeling technology that encodes explicit 3D protein-ligand contacts within a relational graph architecture. The models combine a conditional variational autoencoder that allows for activity-specific molecule generation with putative contact generation that provides predictions of molecular interactions within the target binding pocket. We show that molecules generated with our 3D procedure are more compatible with the binding pocket of the dopamine D2 receptor than those produced by a comparable ligand-based 2D generative method, as measured by docking scores, expected stereochemistry, and recoverability in commercial chemical databases. Predicted protein-ligand contacts were found among highest-ranked docking poses with a high recovery rate. This work shows how the structural context of a protein target can be used to enhance molecule generation. △ Less

Submitted 5 April, 2022; originally announced April 2022.

Comments: 5 pages, 3 figures

Numerical optimization of single-mode fiber-coupled single-photon sources based on semiconductor quantum dots

Authors: Lucas Bremer, Carlos Jimenez, Simon Thiele, Ksenia Weber, Tobias Huber, Sven Rodt, Alois Herkommer, Sven Burger, Sven Höfling, Harald Giessen, Stephan Reitzenstein

Abstract: We perform extended numerical studies to maximize the overall photon coupling efficiency of fiber-coupled quantum dot single-photon sources emitting in the near-infrared and telecom regime. Using the finite element method, we optimize the photon extraction and fiber-coupling efficiency of quantum dot single-photon sources based on micromesas, microlenses, circular Bragg grating cavities and microp… ▽ More We perform extended numerical studies to maximize the overall photon coupling efficiency of fiber-coupled quantum dot single-photon sources emitting in the near-infrared and telecom regime. Using the finite element method, we optimize the photon extraction and fiber-coupling efficiency of quantum dot single-photon sources based on micromesas, microlenses, circular Bragg grating cavities and micropillars. The numerical simulations which consider the entire system consisting of the quantum dot source itself, the coupling lens, and the single-mode fiber yield overall photon coupling efficiencies of up to 83%. Our work provides objectified comparability of different fiber-coupled single-photon sources and proposes optimized geometries for the realization of practical and highly efficient quantum dot single-photon sources. △ Less

Submitted 19 February, 2022; originally announced February 2022.

Journal ref: Opt. Express 30, 15913 (2022)

Evaluation of histological findings with severity grade, to analyze toxicology in-vivo studies

Authors: Ludwig A. Hothorn, Klaus Weber

Abstract: In-vivo toxicological studies are characterized by multiple primary endpoints with quite different scales. Whereas guidelines and publications provide various statistical tests for normally distributed endpoints (such as organ weights) and proportions (such as tumor rates), few approaches are available for graded histopathological findings, such as 0, +, ++, +++. This represents a basic contradict… ▽ More In-vivo toxicological studies are characterized by multiple primary endpoints with quite different scales. Whereas guidelines and publications provide various statistical tests for normally distributed endpoints (such as organ weights) and proportions (such as tumor rates), few approaches are available for graded histopathological findings, such as 0, +, ++, +++. This represents a basic contradiction of the statistical analysis because these graded findings sometimes show a high predictive value for potential toxic effects. Here we discuss different methods comparatively, especially from the viewpoints of i) designs for very small sample sizes and ii) interpretability by toxicologists. A new approach is recommended where a simultaneous test is performed over all class combinations of score levels, such as (0, +) vs (++, +++). Corresponding R code is provided by way of a data example. △ Less

Submitted 8 January, 2022; originally announced January 2022.

Comments: 1 Figure

CryptoMiniSat Switches-Optimization for Solving Cryptographic Instances

Authors: A. -M. Leventi-Peetz, O. Zendel, W. Lennartz, K. Weber

Abstract: Performing hundreds of test runs and a source-code analysis, we empirically identified improved parameter configurations for the CryptoMiniSat (CMS) 5 for solving cryptographic CNF instances originating from algebraic known-plaintext attacks on 3 rounds encryption of the Small AES-64 model cipher SR$(3, 4, 4, 4)$. We finally became able to reconstruct 64-bit long keys in under an hour real time wh… ▽ More Performing hundreds of test runs and a source-code analysis, we empirically identified improved parameter configurations for the CryptoMiniSat (CMS) 5 for solving cryptographic CNF instances originating from algebraic known-plaintext attacks on 3 rounds encryption of the Small AES-64 model cipher SR$(3, 4, 4, 4)$. We finally became able to reconstruct 64-bit long keys in under an hour real time which, to our knowledge, has never been achieved so far. Especially, not without any assumptions or previous knowledge of key-bits (for instance in the form of side-channels, as in \cite{Mohamed2012algebraicSCA}). A statistical analysis of the non-deterministic solver runtimes was carried out and command line parameter combinations were defined to yield best runtimes which ranged from under an hour to a few hours in median at the beginning. We proceeded using an Automatic Algorithm Configuration (AAC) tool to systematically extend the search for even better solver configurations with success to deliver even shorter solving times. In this work we elaborate on the systematics we followed to reach our results in a traceable and reproducible way. The ultimate focus of our investigations is to find out if CMS, when appropriately tuned, is indeed capable to attack even bigger and harder problems than the here solved ones. For the domain of cryptographic research, the duration of the solving time plays an inferior role as compared to the practical feasibility of finding a solution to the problem. The perspective scalability of the here presented results is the object of further investigations. △ Less

Submitted 21 December, 2021; originally announced December 2021.

Journal ref: Daniel Le Berre, Matti Järvisalo (eds). Proceedings of Pragmatics of SAT 2015 and 2018. EPiC Series in Computing, vol. 59, pp. 79--93, 2019

Scope and Sense of Explainability for AI-Systems

Authors: A. -M. Leventi-Peetz, T. Östreich, W. Lennartz, K. Weber

Abstract: Certain aspects of the explainability of AI systems will be critically discussed. This especially with focus on the feasibility of the task of making every AI system explainable. Emphasis will be given to difficulties related to the explainability of highly complex and efficient AI systems which deliver decisions whose explanation defies classical logical schemes of cause and effect. AI systems ha… ▽ More Certain aspects of the explainability of AI systems will be critically discussed. This especially with focus on the feasibility of the task of making every AI system explainable. Emphasis will be given to difficulties related to the explainability of highly complex and efficient AI systems which deliver decisions whose explanation defies classical logical schemes of cause and effect. AI systems have provably delivered unintelligible solutions which in retrospect were characterized as ingenious (for example move 37 of the game 2 of AlphaGo). It will be elaborated on arguments supporting the notion that if AI-solutions were to be discarded in advance because of their not being thoroughly comprehensible, a great deal of the potentiality of intelligent systems would be wasted. △ Less

Submitted 22 December, 2021; v1 submitted 20 December, 2021; originally announced December 2021.

Comments: Version 2 : Improved hyphenations in references

Journal ref: Arai K. (eds) Intelligent Systems and Applications. IntelliSys 2021. Lecture Notes in Networks and Systems, vol 294. Springer, Cham

Analysis of training and seed bias in small molecules generated with a conditional graph-based variational autoencoder -- Insights for practical AI-driven molecule generation

Authors: Seung-gu Kang, Joseph A. Morrone, Jeffrey K. Weber, Wendy D. Cornell

Abstract: The application of deep learning to generative molecule design has shown early promise for accelerating lead series development. However, questions remain concerning how factors like training, dataset, and seed bias impact the technology's utility to medicine and computational chemists. In this work, we analyze the impact of seed and training bias on the output of an activity-conditioned graph-bas… ▽ More The application of deep learning to generative molecule design has shown early promise for accelerating lead series development. However, questions remain concerning how factors like training, dataset, and seed bias impact the technology's utility to medicine and computational chemists. In this work, we analyze the impact of seed and training bias on the output of an activity-conditioned graph-based variational autoencoder (VAE). Leveraging a massive, labeled dataset corresponding to the dopamine D2 receptor, our graph-based generative model is shown to excel in producing desired conditioned activities and favorable unconditioned physical properties in generated molecules. We implement an activity swap** method that allows for the activation, deactivation, or retention of activity of molecular seeds, and we apply independent deep learning classifiers to verify the generative results. Overall, we uncover relationships between noise, molecular seeds, and training set selection across a range of latent-space sampling procedures, providing important insights for practical AI-driven molecule generation. △ Less

Submitted 3 September, 2021; v1 submitted 19 July, 2021; originally announced July 2021.

Comments: 17 pages, 8 figures

Quantum Euler relation for local measurements

Authors: Akram Touil, Kevin Weber, Sebastian Deffner

Abstract: In classical thermodynamics the Euler relation is an expression for the internal energy as a sum of the products of canonical pairs of extensive and intensive variables. For quantum systems the situation is more intricate, since one has to account for the effects of the measurement back action. To this end, we derive a quantum analog of the Euler relation, which is governed by the information retr… ▽ More In classical thermodynamics the Euler relation is an expression for the internal energy as a sum of the products of canonical pairs of extensive and intensive variables. For quantum systems the situation is more intricate, since one has to account for the effects of the measurement back action. To this end, we derive a quantum analog of the Euler relation, which is governed by the information retrieved by local quantum measurements. The validity of the relation is demonstrated for the collective dissipation model, where we find that thermodynamic behavior is exhibited in the weak-coupling regime. △ Less

Submitted 8 June, 2021; originally announced June 2021.

Comments: 13 pages, 4 figures

Journal ref: Entropy 2021, 23(7), 889

3D printed micro-optics for quantum technology: Optimized coupling of single quantum dot emission into a single mode fiber

Authors: Marc Sartison, Ksenia Weber, Simon Thiele, Lucas Bremer, Sarah Fischbach, Thomas Herzog, Sascha Kolatschek, Stephan Reitzenstein, Alois Herkommer, Peter Michler, Simone Luca Portalupi, Harald Giessen

Abstract: Future quantum technology relies crucially on building quantum networks with high fidelity. To achieve this challenging goal, it is of utmost importance to connect single quantum systems in a way such that their emitted single-photons overlap with the highest possible degree of coherence. This requires perfect mode overlap of the emitted light of different emitters, which necessitates the use of s… ▽ More Future quantum technology relies crucially on building quantum networks with high fidelity. To achieve this challenging goal, it is of utmost importance to connect single quantum systems in a way such that their emitted single-photons overlap with the highest possible degree of coherence. This requires perfect mode overlap of the emitted light of different emitters, which necessitates the use of single mode fibers. Here we present an advanced manufacturing approach to accomplish this task: we combine 3D printed complex micro-optics such as hemispherical and Weierstrass solid immersion lenses as well as total internal reflection solid immersion lenses on top of single InAs quantum dots with 3D printed optics on single mode fibers and compare their key features. Interestingly, the use of hemispherical solid immersion lenses further increases the localization accuracy of the emitters to below 1 nm when acquiring micro-photoluminescence maps. The system can be joined together and permanently fixed. This integrated system can be cooled by dip** into liquid helium, by a Stirling cryocooler or by a closed-cycle helium cryostat without the necessity for optical windows, as all access is through the integrated single mode fiber. We identify the ideal optical designs and present experiments that prove excellent high-rate single-photon emission by high-contrast Hanbury Brown and Twiss experiments. △ Less

Submitted 13 July, 2020; originally announced July 2020.

Comments: 26 pages, 27 figures, submitted to Light:Advanced Manufacturing

Frozen Pipes: Lattice Models for Grothendieck Polynomials

Authors: Ben Brubaker, Claire Frechette, Andrew Hardt, Emily Tibor, Katherine Weber

Abstract: We introduce families of two-parameter multivariate polynomials indexed by pairs of partitions $v,w$ -- biaxial double $(β,q)$-Grothendieck polynomials -- which specialize at $q=0$ and $v=1$ to double $β$-Grothendieck polynomials from torus-equivariant connective K-theory. Initially defined recursively via divided difference operators, our main result is that these new polynomials arise as partiti… ▽ More We introduce families of two-parameter multivariate polynomials indexed by pairs of partitions $v,w$ -- biaxial double $(β,q)$-Grothendieck polynomials -- which specialize at $q=0$ and $v=1$ to double $β$-Grothendieck polynomials from torus-equivariant connective K-theory. Initially defined recursively via divided difference operators, our main result is that these new polynomials arise as partition functions of solvable lattice models. Moreover, the associated quantum group of the solvable model for polynomials in $n$ pairs of variables is a Drinfeld twist of the $U_q(\widehat{\mathfrak{sl}}_{n+1})$ $R$-matrix. By leveraging the resulting Yang-Baxter equations of the lattice model, we show that these polynomials simultaneously generalize double $β$-Grothendieck polynomials and dual double $β$-Grothendieck polynomials for arbitrary permutations. We then use properties of the model and Yang-Baxter equations to reprove Fomin-Kirillov's Cauchy identity for $β$-Grothendieck polynomials, generalize it to a new Cauchy identity for biaxial double $β$-Grothendieck polynomials, and prove a new branching rule for double $β$-Grothendieck polynomials. △ Less

Submitted 10 September, 2021; v1 submitted 8 July, 2020; originally announced July 2020.

Comments: 43 pages, 21 figures; added an extra "quantum" parameter q to model

MSC Class: 05E14

Putative quantum critical point in the itinerant magnet ZrFe$_4$Si$_2$ with a frustrated quasi-one-dimensional structure

Authors: M. O. Ajeesh, K. Weber, C. Geibel, M. Nicklas

Abstract: The Fe sublattice in the compound ZrFe$_4$Si$_2$ features geometrical frustration and quasi-one-dimensionality. We therefore investigated the magnetic behavior in ZrFe$_4$Si$_2$ and its evolution upon substituting Ge for Si and under the application of hydrostatic pressure using structural, magnetic, thermodynamic, and electrical-transport probes. Magnetic measurements reveal that ZrFe$_4$Si$_2$ h… ▽ More The Fe sublattice in the compound ZrFe$_4$Si$_2$ features geometrical frustration and quasi-one-dimensionality. We therefore investigated the magnetic behavior in ZrFe$_4$Si$_2$ and its evolution upon substituting Ge for Si and under the application of hydrostatic pressure using structural, magnetic, thermodynamic, and electrical-transport probes. Magnetic measurements reveal that ZrFe$_4$Si$_2$ holds paramagnetic Fe moments with an effective moment $μ_{\rm eff}= 2.18~μ_{B}$. At low temperatures the compound shows a weak short-range magnetic order below 6 K. Our studies demonstrate that substituting Ge for Si increases the unit-cell volume and stabilizes the short-range order into a long-range spin-density wave type magnetic order. On the other hand, hydrostatic pressure studies using electrical-resistivity measurements on ZrFe$_4$(Si$_{0.88}$Ge$_{0.12}$)$_2$ indicate a continuous suppression of the magnetic ordering upon increasing pressure. Therefore, our combined chemical substitution and hydrostatic pressure studies suggest the existence of a lattice-volume-controlled quantum critical point in ZrFe$_4$Si$_2$. △ Less

Submitted 18 November, 2020; v1 submitted 4 July, 2020; originally announced July 2020.

Comments: 9 pages, 7 figures, Published version with new title and extended discussion

Journal ref: Phys. Rev. B 102, 184403 (2020)

Quantum dot single-photon emission coupled into single-mode fibers with 3D printed micro-objectives

Authors: Lucas Bremer, Ksenia Weber, Sarah Fischbach, Simon Thiele, Marco Schmidt, Arsenty Kakganskiy, Sven Rodt, Alois Herkommer, Marc Sartison, Simone Luca Portalupi, Peter Michler, Harald Giessen, Stephan Reitzenstein

Abstract: User-friendly single-photon sources with high photon-extraction efficiency are crucial building blocks for photonic quantum applications. For many of these applications, such as long-distance quantum key distribution, the use of single-mode optical fibers is mandatory, which leads to stringent requirements regarding the device design and fabrication. We report on the on-chip integration of a quant… ▽ More User-friendly single-photon sources with high photon-extraction efficiency are crucial building blocks for photonic quantum applications. For many of these applications, such as long-distance quantum key distribution, the use of single-mode optical fibers is mandatory, which leads to stringent requirements regarding the device design and fabrication. We report on the on-chip integration of a quantum dot microlens with a 3D-printed micro-objective in combination with a single-mode on-chip fiber coupler. The practical quantum device is realized by deterministic fabrication of the QD-microlens via in-situ electron-beam lithography and 3D two-photon laser writing of the on-chip micro-objective and fiber-holder. The QD with microlens is an efficient single-photon source, whose emission is collimated by the on-chip micro-objective. A second polymer microlens is located at the end facet of the single-mode fiber and ensures that the collimated light is efficiently coupled into the fiber core. For this purpose, the fiber is placed in the on-chip fiber chuck, which is precisely aligned to the QD-microlens thanks to the sub-$μ$m processing accuracy of high-resolution two-photon direct laser writing. This way, we obtain a fully integrated high-quality quantum device with broadband photon extraction efficiency, a single-mode fiber-coupling efficiency of 26%, a single-photon flux of 1.5 MHz at single-mode fibre output and a multi-photon probability of 13 % under pulsed optical excitation. In addition, the stable design of the developed fiber-coupled quantum device makes it highly attractive for integration into user-friendly plug-and-play quantum applications. △ Less

Submitted 22 May, 2020; originally announced May 2020.

Combining docking pose rank and structure with deep learning improves protein-ligand binding mode prediction

Authors: Joseph A. Morrone, Jeffrey K. Weber, Tien Huynh, Heng Luo, Wendy D. Cornell

Abstract: We present a simple, modular graph-based convolutional neural network that takes structural information from protein-ligand complexes as input to generate models for activity and binding mode prediction. Complex structures are generated by a standard docking procedure and fed into a dual-graph architecture that includes separate sub-networks for the ligand bonded topology and the ligand-protein co… ▽ More We present a simple, modular graph-based convolutional neural network that takes structural information from protein-ligand complexes as input to generate models for activity and binding mode prediction. Complex structures are generated by a standard docking procedure and fed into a dual-graph architecture that includes separate sub-networks for the ligand bonded topology and the ligand-protein contact map. This network division allows contributions from ligand identity to be distinguished from effects of protein-ligand interactions on classification. We show, in agreement with recent literature, that dataset bias drives many of the promising results on virtual screening that have previously been reported. However, we also show that our neural network is capable of learning from protein structural information when, as in the case of binding mode prediction, an unbiased dataset is constructed. We develop a deep learning model for binding mode prediction that uses docking ranking as input in combination with docking structures. This strategy mirrors past consensus models and outperforms the baseline docking program in a variety of tests, including on cross-docking datasets that mimic real-world docking use cases. Furthermore, the magnitudes of network predictions serve as reliable measures of model confidence △ Less

Submitted 7 October, 2019; originally announced October 2019.

Colored five-vertex models and Lascoux polynomials and atoms

Authors: Valentin Buciumas, Travis Scrimshaw, Katherine Weber

Abstract: We construct an integrable colored five-vertex model whose partition function is a Lascoux atom based on the five-vertex model of Motegi and Sakai [arXiv:1305.3030] and the colored five-vertex model of Brubaker, the first author, Bump, and Gustafsson [arXiv:1902.01795]. We then modify this model in two different ways to construct a Lascoux polynomial, yielding the first known combinatorial interpr… ▽ More We construct an integrable colored five-vertex model whose partition function is a Lascoux atom based on the five-vertex model of Motegi and Sakai [arXiv:1305.3030] and the colored five-vertex model of Brubaker, the first author, Bump, and Gustafsson [arXiv:1902.01795]. We then modify this model in two different ways to construct a Lascoux polynomial, yielding the first known combinatorial interpretation of a Lascoux polynomial and atom. Using this, we prove a conjectured combinatorial interpretation in terms of set-valued tableaux of a Lascoux polynomial and atom due to Pechenik and the second author [arXiv:1904.09674]. We also prove the combinatorial interpretation of the Lascoux atom using set-valued skyline tableaux of Monical [arXiv:1611.08777]. △ Less

Submitted 31 March, 2020; v1 submitted 20 August, 2019; originally announced August 2019.

Comments: 23 pages, 7 figures; added examples and other changes from referee report

MSC Class: 05E05; 82B23; 14M15; 05A19

Substrate-Modulated Reductive Graphene Functionalization

Authors: Ricarda A. Schäfer, Konstantin Weber, Frank Hauke, Vojislav Krstic, Bernd Meyer, Andreas Hirsch

Abstract: Covalently functionalizing mechanical exfoliated monolayer and bilayer graphenides with λ-iodanes led to the discovery that the monolayers supported on a SiO2 substrate are considerably more reactive than bilayers as demonstrated by statistical Raman spectroscopy/microscopy. Supported by DFT calculations we show that ditopic addend binding leads to much more stable products than the corresponding… ▽ More Covalently functionalizing mechanical exfoliated monolayer and bilayer graphenides with λ-iodanes led to the discovery that the monolayers supported on a SiO2 substrate are considerably more reactive than bilayers as demonstrated by statistical Raman spectroscopy/microscopy. Supported by DFT calculations we show that ditopic addend binding leads to much more stable products than the corresponding monotopic reactions due to much lower lattice strain of the reactions products. The chemical nature of the substrate (graphene versus SiO2) plays a crucial role.14858-14862. △ Less

Submitted 4 May, 2018; originally announced May 2018.

Journal ref: Angew. Chem. Int. Ed. 2016, 55, 14858-14862

Folding and Stabilization of Native-Sequence-Reversed Proteins

Authors: Yuanzhao Zhang, Jeffrey K Weber, Ruhong Zhou

Abstract: Though the problem of sequence-reversed protein folding is largely unexplored, one might speculate that reversed native protein sequences should be significantly more foldable than purely random heteropolymer sequences. In this article, we investigate how the reverse-sequences of native proteins might fold by examining a series of small proteins of increasing structural complexity (α-helix, \b{eta… ▽ More Though the problem of sequence-reversed protein folding is largely unexplored, one might speculate that reversed native protein sequences should be significantly more foldable than purely random heteropolymer sequences. In this article, we investigate how the reverse-sequences of native proteins might fold by examining a series of small proteins of increasing structural complexity (α-helix, \b{eta}-hairpin, α-helix bundle, and α/\b{eta}-protein). Employing a tandem protein structure prediction algorithmic and molecular dynamics simulation approach, we find that the ability of reverse sequences to adopt native-like folds is strongly in influenced by protein size and the flexibility of the native hydrophobic core. For \b{eta}-hairpins with reverse-sequences that fail to fold, we employ a simple mutational strategy for guiding stable hairpin formation that involves the insertion of amino acids into the \b{eta}-turn region. This systematic look at reverse sequence duality sheds new light on the problem of protein sequence-structure map** and may serve to inspire new protein design and protein structure prediction protocols. △ Less

Submitted 16 June, 2016; originally announced June 2016.

Comments: 7 pages, 5 figures

Journal ref: Scientific Reports 6 (2016)

Meter-scale spark X-ray spectrumstatistics

Authors: B. E. Carlson, N. Østgaard, P. Kochkin, Ø. Grondahl, R. Nisi, K. Weber, Z. Scherrer, K. LeCaptain

Abstract: X-ray emission by sparks implies bremsstrahlung from a population of energetic electrons, but the details of this process remain a mystery. We present detailed statistical analysis of X-ray spectra detected by multiple detectors during sparks produced by 1 MV negative high-voltage pulses with 1 $μ$s risetime. With over 900 shots, we statistically analyze the signals, assuming that the distribution… ▽ More X-ray emission by sparks implies bremsstrahlung from a population of energetic electrons, but the details of this process remain a mystery. We present detailed statistical analysis of X-ray spectra detected by multiple detectors during sparks produced by 1 MV negative high-voltage pulses with 1 $μ$s risetime. With over 900 shots, we statistically analyze the signals, assuming that the distribution of spark X-ray fluence behaves as a power law and that the energy spectrum of X-rays detectable after traversing $\sim$2 m of air and a thin aluminum shield is exponential. We then determine the parameters of those distributions by fitting cumulative distribution functions to the observations. The fit results match the observations very well if the mean of the exponential X-ray energy distribution is 86 $\pm$ 7 keV and the spark X-ray fluence power law distribution has index -1.29 $\pm$ 0.04 and spans at least 3 orders of magnitude in fluence. △ Less

Submitted 18 May, 2016; originally announced May 2016.

Self-gravitating systems of ideal gases in the 1PN approximation

Authors: G. M. Kremer, Martín G. Richarte, Karla Weber

Abstract: We obtain the Maxwell-Jüttner distribution function at first order in the post-Newtonian approximation within the framework of general relativity. Taking into account the aforesaid distribution function, we compute the particle four-flow and energy-momentum tensor. We focus on the search of static solutions for the gravitational potentials with spherical symmetry. In doing so, we obtain the densit… ▽ More We obtain the Maxwell-Jüttner distribution function at first order in the post-Newtonian approximation within the framework of general relativity. Taking into account the aforesaid distribution function, we compute the particle four-flow and energy-momentum tensor. We focus on the search of static solutions for the gravitational potentials with spherical symmetry. In doing so, we obtain the density, pressure and gravitational potential energy profiles in terms of dimensionless radial coordinate by solving the aforesaid equations numerically. In particular, we find the parametric profile for the equation of state $p/ρ$ in terms of the dimensionless radial coordinate. Due to its physical relevance, we also find the galaxy rotation curves using the post-Newtonian approximation. We join two different kinds of static solutions in order to account for the linear regime near the center and the typical flatten behavior at large radii as well. △ Less

Submitted 30 March, 2016; v1 submitted 16 March, 2016; originally announced March 2016.

Comments: 11 pages, 6 figures. Phys. Rev. D 93, 064073 (2016)

Journal ref: Phys. Rev. D 93, 064073 (2016)

Absence of Differential Correlations Between the Wave Equations for Upper-Lower One-Index Twistor Fields Borne by the Infeld-van der Waerden Spinor Formalisms for General Relativity

Authors: Karla Weber, J. G. Cardoso

Abstract: It is pointed out that the wave equations for any upper-lower one-index twistor fields which take place in the frameworks of the Infeld-van der Waerden γε-formalisms must be formally the same. The only reason for the occurrence of this result seems to be directly related to the fact that the spinor translation of the traditional conformal Killing equation yields twistor equations of the same form.… ▽ More It is pointed out that the wave equations for any upper-lower one-index twistor fields which take place in the frameworks of the Infeld-van der Waerden γε-formalisms must be formally the same. The only reason for the occurrence of this result seems to be directly related to the fact that the spinor translation of the traditional conformal Killing equation yields twistor equations of the same form. It thus appears that the conventional torsionless devices for kee** track in the γ-formalism of valences of spinor differential configurations turn out not to be useful for sorting out the typical patterns of the equations at issue. △ Less

Submitted 23 November, 2013; originally announced November 2013.

Comments: About 7 pages, 18 references

Journal ref: Advances in Applied Clifford Algebras (ISSN 0188-7009) 2014 (Online First)

Quantum teleportation and entanglement swap** with linear optics logic gates

Authors: Christian Schmid, Nikolai Kiesel, Ulrich K. Weber, Rupert Ursin, Anton Zeilinger, Harald Weinfurter

Abstract: We report on the usage of a linear optics phase gate for distinguishing all four Bell states simultaneously in a quantum teleportation and entanglement swap** protocol. This is demonstrated by full state tomography of the one and two qubit output states of the two protocols, yielding average state fidelities of about 0.83 and 0.77, respectively. In addition, the performance of the teleportatio… ▽ More We report on the usage of a linear optics phase gate for distinguishing all four Bell states simultaneously in a quantum teleportation and entanglement swap** protocol. This is demonstrated by full state tomography of the one and two qubit output states of the two protocols, yielding average state fidelities of about 0.83 and 0.77, respectively. In addition, the performance of the teleportation channel is characterised by quantum process tomography. The non classical properties of the entanglement swap** output states are further confirmed by the violation of a CHSH-type Bell inequality of 2.14 on average. △ Less

Submitted 22 September, 2008; originally announced September 2008.

Comments: 11 pages, 3 figures

Journal ref: 2009 New Journal of Physics Vol. 11(3), pp. 033008

Deriving molecular bonding from macromolecular self-assembly

Authors: Fabien Silly, Ulrich K. Weber, Adam Q. Shaw, Victor M. Burlakov, Martin R. Castell, G. A. D. Briggs, David G. Pettifor

Abstract: Macromolecules can form regular structures on inert surfaces. We have developed a combined empirical and modeling approach to derive the bonding. From experimental scanning tunneling microscopy (STM) images of structures formed on Au(111) by melamine, by PTCDA, and by a 2:3 mixture of the two, we determine the molecular bonding morphologies. Within these bonding morphologies and recognizing the… ▽ More Macromolecules can form regular structures on inert surfaces. We have developed a combined empirical and modeling approach to derive the bonding. From experimental scanning tunneling microscopy (STM) images of structures formed on Au(111) by melamine, by PTCDA, and by a 2:3 mixture of the two, we determine the molecular bonding morphologies. Within these bonding morphologies and recognizing the distinction between cohesive and adhesive molecular interactions we simultaneously simulated different molecular structures using a lattice Monte Carlo method. Within these bonding morphologies there is a distinction between cohesive and adhesive molecular interactions. We have simulated different molecular structures using a lattice Monte Carlo method. △ Less

Submitted 3 March, 2008; originally announced March 2008.

Fundamental noise limitations to supercontinuum generation in microstructure fiber

Authors: K. L. Corwin, N. R. Newbury, J. M. Dudley, S. Coen, S. A. Diddams, K. Weber, R. S. Windeler

Abstract: Broadband noise on supercontinuum spectra generated in microstructure fiber is shown to lead to amplitude fluctuations as large as 50 % for certain input laser pulse parameters. We study this noise using both experimental measurements and numerical simulations with a generalized stochastic nonlinear Schroedinger equation, finding good quantitative agreement over a range of input pulse energies a… ▽ More Broadband noise on supercontinuum spectra generated in microstructure fiber is shown to lead to amplitude fluctuations as large as 50 % for certain input laser pulse parameters. We study this noise using both experimental measurements and numerical simulations with a generalized stochastic nonlinear Schroedinger equation, finding good quantitative agreement over a range of input pulse energies and chirp values. This noise is shown to arise from nonlinear amplification of two quantum noise inputs: the input pulse shot noise and the spontaneous Raman scattering down the fiber. △ Less

Submitted 6 December, 2002; originally announced December 2002.

Comments: 16 pages with 6 figures

Study of High Energy Heavy-Ion Collisions in a Relativistic BUU-Approach with Momentum-Dependent Mean-Fields

Authors: Tomoyuki Maruyama, Wolfgang Cassing, Ulrich Mosel, Stefan Teis, Klaus Weber

Abstract: We introduce momentum-dependent scalar and vector fields into the Lorentz covariant relativistic BUU- (RBUU-) approach employing a polynomial ansatz for the relativistic nucleon-nucleon interaction. The momentum-dependent parametrizations are shown to be valid up to about 1 GeV/u for the empirical proton-nucleus optical potential. We perform numerical simulations for heavy-ion collisions within… ▽ More We introduce momentum-dependent scalar and vector fields into the Lorentz covariant relativistic BUU- (RBUU-) approach employing a polynomial ansatz for the relativistic nucleon-nucleon interaction. The momentum-dependent parametrizations are shown to be valid up to about 1 GeV/u for the empirical proton-nucleus optical potential. We perform numerical simulations for heavy-ion collisions within the RBUU-approach adopting momentum-dependent and momentum-independent mean-fields and calculate the transverse flow in and perpendicular to the reaction plane, the directivity distribution as well as subthreshold K+-production. By means of these observables we discuss the particular role of the momentum-dependent forces and their implications on the nuclear equation of state. We find that only a momentum-dependent parameter-set can explain the experimental data on the transverse flow in the reaction plane from 150 - 1000 MeV/u and the differential K+-production cross sections at 1 GeV/u at the same time. △ Less

Submitted 23 July, 1993; originally announced July 1993.

Comments: 27 pages, figures can be obtained from the authors, UGI-93-06

Journal ref: Nucl.Phys. A573 (1994) 653-675