-
A continuum model for the elongation and orientation of Von Willebrand Factor with applications in arterial flow
Authors:
Edwina F. Yeo,
James M. Oliver,
Netanel Korin,
Sarah L. Waters
Abstract:
The blood protein Von Willebrand Factor (VWF) is critical in facilitating arterial thrombosis. At pathologically high shear rates the protein unfolds and binds to the arterial wall, enabling the rapid deposition of platelets from the blood. We present a novel continuum model for VWF dynamics in flow based on a modified viscoelastic fluid model that incorporates a single constitutive relation to de…
▽ More
The blood protein Von Willebrand Factor (VWF) is critical in facilitating arterial thrombosis. At pathologically high shear rates the protein unfolds and binds to the arterial wall, enabling the rapid deposition of platelets from the blood. We present a novel continuum model for VWF dynamics in flow based on a modified viscoelastic fluid model that incorporates a single constitutive relation to describe the propensity of VWF to unfold as a function of the scalar shear rate. Using experimental data of VWF unfolding in pure shear flow, we fix the parameters for VWF's unfolding propensity and the maximum VWF length, so that the protein is half unfolded at a shear rate of approximately 5,000 s$^{-1}$. We then use the theoretical model to predict VWF's behaviour in two complex flows where experimental data is challenging to obtain: pure elongational flow and stenotic arterial flow.
In pure elongational flow, our model predicts that VWF is 50% unfolded at approximately 2,000 s$^{-1}$, matching the established hypothesis that VWF unfolds at lower shear rates in elongational flow than in shear flow. We demonstrate the sensitivity of this elongational flow prediction to the value of maximum VWF length used in the model, which varies significantly across experimental studies, predicting that VWF can unfold between 600 - 3,200 s$^{-1}$ depending on the selected value. Finally, we examine VWF dynamics in a range of idealised arterial stenoses, predicting the relative extension of VWF in elongational flow structures in the centre of the artery compared to high-shear regions near the arterial walls.
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Stokes flows in a two-dimensional bifurcation
Authors:
Yidan Xue,
Stephen J. Payne,
Sarah L. Waters
Abstract:
The flow network model is an established approach to approximate pressure-flow relationships in a bifurcating network, and has been widely used in many contexts. Existing models typically assume unidirectional flow and exploit Poiseuille's law, and thus neglect the impact of bifurcation geometry and finite-sized objects on the flow. We determine the impact of bifurcation geometry and objects by co…
▽ More
The flow network model is an established approach to approximate pressure-flow relationships in a bifurcating network, and has been widely used in many contexts. Existing models typically assume unidirectional flow and exploit Poiseuille's law, and thus neglect the impact of bifurcation geometry and finite-sized objects on the flow. We determine the impact of bifurcation geometry and objects by computing Stokes flows in a two-dimensional (2D) bifurcation using the LARS (Lightning-AAA Rational Stokes) algorithm, a novel mesh-free algorithm for solving 2D Stokes flow problems utilising an applied complex analysis approach based on rational approximation of the Goursat functions. We compute the flow conductances of bifurcations with different channel widths, bifurcation angles, curved boundary geometries, and fixed circular objects. We quantify the difference between the computed conductances and their Poiseuille's law approximations to demonstrate the importance of incorporating detailed bifurcation geometry into existing flow network models. We parameterise the flow conductances of 2D bifurcation as functions of the dimensionless parameters of bifurcation geometry and a fixed object using a machine learning approach, which is simple to use and provides more accurate approximations than Poiseuille's law. Finally, the details of the 2D Stokes flows in bifurcations are presented.
△ Less
Submitted 28 June, 2024; v1 submitted 20 September, 2023;
originally announced September 2023.
-
Computation of 2D Stokes flows via lightning and AAA rational approximation
Authors:
Yidan Xue,
Sarah L. Waters,
Lloyd N. Trefethen
Abstract:
Low Reynolds number fluid flows are governed by the Stokes equations. In two dimensions, Stokes flows can be described by two analytic functions, known as Goursat functions. Brubeck and Trefethen (2022) recently introduced a lightning Stokes solver that uses rational functions to approximate the Goursat functions in polygonal domains. In this paper, we present the "LARS" algorithm (Lightning-AAA R…
▽ More
Low Reynolds number fluid flows are governed by the Stokes equations. In two dimensions, Stokes flows can be described by two analytic functions, known as Goursat functions. Brubeck and Trefethen (2022) recently introduced a lightning Stokes solver that uses rational functions to approximate the Goursat functions in polygonal domains. In this paper, we present the "LARS" algorithm (Lightning-AAA Rational Stokes) for computing 2D Stokes flows in domains with smooth boundaries and multiply-connected domains using lightning and AAA rational approximation (Nakatsukasa et al., 2018). After validating our solver against known analytical solutions, we solve a variety of 2D Stokes flow problems with physical and engineering applications. Using these examples, we show rational approximation can now be used to compute 2D Stokes flows in general domains. The computations take less than a second and give solutions with at least 6-digit accuracy.
△ Less
Submitted 30 November, 2023; v1 submitted 23 June, 2023;
originally announced June 2023.
-
Integral constraints in multiple scales problems with a slowly varying microstructure
Authors:
A. Kent,
S. L. Waters,
J. Oliver,
S. J. Chapman
Abstract:
Asymptotic homogenisation is considered for problems with integral constraints imposed on a slowly-varying microstructure; an insulator with an array of perfectly dielectric inclusions of slowly varying size serves as a paradigm. Although it is well-known how to handle each of these effects (integral constraints, slowly-varying microstructure) independently within multiple scales analysis, additio…
▽ More
Asymptotic homogenisation is considered for problems with integral constraints imposed on a slowly-varying microstructure; an insulator with an array of perfectly dielectric inclusions of slowly varying size serves as a paradigm. Although it is well-known how to handle each of these effects (integral constraints, slowly-varying microstructure) independently within multiple scales analysis, additional care is needed when they are combined. Using the flux transport theorem, the multiple scales form of an integral constraint on a slowly varying domain is identified. The proposed form is applied to obtain a homogenised model for the electric potential in a dielectric composite, where the microstructure slowly varies and the integral constraint arises due to a statement of charge conservation. A comparison with multiple scales analysis of the problem with established approaches provides validation that the proposed form results in the correct homogenised model.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
Role of kidney stones in renal pelvis flow
Authors:
C. R. Constante-Amores,
L. Kahouadji,
J. G. Williams,
D. E. Moulton,
B. W. Turney,
S. Shin,
J. Chergui,
D. Juric,
S. L. Waters
Abstract:
We examine the time-dependent flow dynamics inside an idealised renal pelvis in the context of a surgical procedure for kidney stone removal, extending previous work by Williams et al. (2020,2021), who showed how vortical flow structures can hinder mass transport in a canonical two-dimensional domain. Here, we examine the time-dependent evolution of these vortical flow structures in three-dimensio…
▽ More
We examine the time-dependent flow dynamics inside an idealised renal pelvis in the context of a surgical procedure for kidney stone removal, extending previous work by Williams et al. (2020,2021), who showed how vortical flow structures can hinder mass transport in a canonical two-dimensional domain. Here, we examine the time-dependent evolution of these vortical flow structures in three-dimensions, and incorporate the presence of rigid kidney stones. We perform direct numerical simulations, solving the transient Navier-Stokes equations in a spherical domain. The results shed light on the crucial role of flow circulation in the renal cavity and its effect on the trajectories of rigid stones. We demonstrate that stones can either be washed out of the cavity along with the fluid, or be trapped in the cavity via their interaction with vortical flow structures. Additionally, we study the effect of multiple stones in the flow field within the cavity in terms of the kinetic energy, entrapped fluid volume, and the clearance rate of a passive tracer modelled via an advection--diffusion equation. We demonstrate that the flow in the presence of stones features a higher vorticity production within the cavity compared with the stone-free cases.
△ Less
Submitted 23 November, 2022; v1 submitted 28 March, 2022;
originally announced March 2022.
-
A Homogenised Model of Fluid-String Interaction
Authors:
A. Kent,
S. L. Waters,
J. Oliver,
S. J. Chapman
Abstract:
A homogenised model is developed to describe the interaction between aligned strings and an incompressible, viscous, Newtonian fluid. In the case of many strings, the ratio of string separation to domain width gives a small parameter which can be exploited to simplify the problem. Model derivation using multiscale asymptotics results in a modified Darcy law for fluid flow, with coefficients determ…
▽ More
A homogenised model is developed to describe the interaction between aligned strings and an incompressible, viscous, Newtonian fluid. In the case of many strings, the ratio of string separation to domain width gives a small parameter which can be exploited to simplify the problem. Model derivation using multiscale asymptotics results in a modified Darcy law for fluid flow, with coefficients determined by averaged solutions to microscale problems. Fluid flow is coupled to solid deformation via a homogenised force balance obtained by coarse-graining the balance on each string. This approach offers an alternative method to systematically derive the equations governing the interaction of Stokes flow with many flexible structures. The resulting model of fluid-structure interaction is reduced to a single scalar, linear, partial differential equation by introducing a potential for the pressure. Analytical solutions are presented for a cylindrical geometry subject to time harmonic motion of the string ends. Scaling laws are identified that describe the variation of shear stress exerted on the string surface with the forcing frequency.
△ Less
Submitted 14 February, 2022;
originally announced February 2022.
-
The electric double layer at the interface between a polyelectrolyte gel and salt bath
Authors:
Matthew G. Hennessy,
Giulia L. Celora,
Andreas Münch,
Barbara Wagner,
Sarah L. Waters
Abstract:
The electric double layer (EDL) that forms at the interface between a polyelectrolyte gel and a salt bath is studied using asymptotic and numerical methods. Specifically, matched asymptotic expansions, based on the smallness of the Debye length relative to the typical gel dimensions, are used to construct solutions of the governing equations and derive electroneutral models with consistent jump co…
▽ More
The electric double layer (EDL) that forms at the interface between a polyelectrolyte gel and a salt bath is studied using asymptotic and numerical methods. Specifically, matched asymptotic expansions, based on the smallness of the Debye length relative to the typical gel dimensions, are used to construct solutions of the governing equations and derive electroneutral models with consistent jump conditions across the gel-bath interface. A general approach for solving the equations of incompressible nonlinear elasticity in a curved boundary layer is developed and used to resolve the gel mechanics in the EDL. A critical feature of the model is that it accounts for phase separation within the gel, which gives rise to diffuse interfaces with a characteristic thickness described by the Kuhn length. We show that the solutions of the electroneutral model can only be asymptotically matched to the solutions in the EDL, in general, when the Kuhn length greatly exceeds the Debye length. Conversely, if the Debye length is similar to or larger than the Kuhn length, then the entire gel can self-organise into periodic, electrically charged domains via phase separation. The breakdown of electroneutrality demonstrates that the commonly invoked electroneutral assumption must be used with caution, as it generally only applies when the Debye length is much smaller than the Kuhn length.
△ Less
Submitted 27 January, 2022;
originally announced January 2022.
-
A kinetic model of a polyelectrolyte gel undergoing phase separation
Authors:
Giulia L. Celora,
Matthew G. Hennessy,
Andreas Münch,
Barbara Wagner,
Sarah L. Waters
Abstract:
In this study we use non-equilibrium thermodynamics to systematically derive a phase-field model of a polyelectrolyte gel coupled to a hydrodynamic model for a salt solution surrounding the gel. The governing equations for the gel account for the free energy of the internal interfaces which form upon phase separation, the nonlinear elasticity of the polyelectrolyte network, and multi-component dif…
▽ More
In this study we use non-equilibrium thermodynamics to systematically derive a phase-field model of a polyelectrolyte gel coupled to a hydrodynamic model for a salt solution surrounding the gel. The governing equations for the gel account for the free energy of the internal interfaces which form upon phase separation, the nonlinear elasticity of the polyelectrolyte network, and multi-component diffusive transport following a Stefan--Maxwell approach. The time-dependent model describes the evolution of the gel across multiple time and spatial scales and so is able to capture the large-scale solvent flux and the emergence of long-time pattern formation in the system. We explore the model for the case of a constrained gel undergoing uni-axial deformations. Numerical simulations show that rapid changes in the gel volume occur once the volume phase transition sets in, as well as the triggering of spinodal decomposition that leads to strong inhomogeneities in the lateral stresses, potentially leading to experimentally visible patterns.
△ Less
Submitted 28 May, 2021;
originally announced May 2021.
-
The dynamics of a collapsing polyelectrolyte gel
Authors:
Giulia L. Celora,
Matthew G. Hennessy,
Andreas Münch,
Barbara Wagner,
Sarah L. Waters
Abstract:
We analyse the dynamics of different routes to collapse of a constrained polyelectrolyte gel in contact with an ionic bath. The evolution of the gel is described by a model that incorporates non-linear elasticity, Stefan-Maxwell diffusion and interfacial gradient free energy to account for phase separation of the gel. A bifurcation analysis of the homogeneous equilibrium states reveals three solut…
▽ More
We analyse the dynamics of different routes to collapse of a constrained polyelectrolyte gel in contact with an ionic bath. The evolution of the gel is described by a model that incorporates non-linear elasticity, Stefan-Maxwell diffusion and interfacial gradient free energy to account for phase separation of the gel. A bifurcation analysis of the homogeneous equilibrium states reveals three solution branches at low ion concentrations in the bath, giving way to only one above a critical ion concentration. We present numerical solutions that capture both the spatial heterogeneity and the multiple time-scales involved in the process of collapse. These solutions are complemented by two analytical studies. Firstly, a phase-plane analysis that reveals the existence of a depletion front for the transition from the highly swollen to the new collapsed equilibrium state. This depletion front is initiated after the fast ionic diffusion has set the initial condition for this time regime. Secondly, we perform a linear stability analysis about the homogeneous states that show that for a range of ion concentrations in the bath, spinodal decomposition of the swollen state gives rise to localized solvent-rich(poor) and, due to the electro-neutrality condition, ion-poor(rich) phases that coarsen on the route to collapse. This dynamics of a collapsing polyelectrolyte gel has not been described before.
△ Less
Submitted 13 May, 2021;
originally announced May 2021.
-
Multiscale modelling and homogensation of fibre-reinforced hydrogels for tissue engineering
Authors:
M. J. Chen,
L. S. Kimpton,
J. P. Whiteley,
M. Castilho,
J. Malda,
C. P. Please,
S. L. Waters,
H. M. Byrne
Abstract:
Tissue engineering aims to grow artificial tissues \emph{in vitro} to replace those in the body that have been damaged through age, trauma or disease. A recent approach to engineer artificial cartilage involves seeding cells within a scaffold consisting of an interconnected 3D-printed lattice of polymer fibres combined with a cast or printed hydrogel, and subjecting the construct (cell-seeded scaf…
▽ More
Tissue engineering aims to grow artificial tissues \emph{in vitro} to replace those in the body that have been damaged through age, trauma or disease. A recent approach to engineer artificial cartilage involves seeding cells within a scaffold consisting of an interconnected 3D-printed lattice of polymer fibres combined with a cast or printed hydrogel, and subjecting the construct (cell-seeded scaffold) to an applied load in a bioreactor. A key question is to understand how the applied load is distributed throughout the construct. To address this, we employ homogenisation theory to derive equations governing the effective macroscale material properties of a periodic, elastic-poroelastic composite. We treat the fibres as a linear elastic material and the hydrogel as a poroelastic material, and exploit the disparate length scales (small inter-fibre spacing compared with construct dimensions) to derive macroscale equations governing the response of the composite to an applied load. This homogenised description reflects the orthotropic nature of the composite. To validate the model, solutions from finite element simulations of the macroscale, homogenised equations are compared to experimental data describing the unconfined compression of the fibre-reinforced hydrogels. The model is used to derive the bulk mechanical properties of a cylindrical construct of the composite material for a range of fibre spacings, and to determine the local mechanical environment experienced by cells embedded within the construct.
△ Less
Submitted 28 November, 2017;
originally announced December 2017.
-
Bifurcations and dynamics emergent from lattice and continuum models of bioactive porous media
Authors:
Andrew L. Krause,
Dmitry Beliaev,
Robert A. Van Gorder,
Sarah L. Waters
Abstract:
We study dynamics emergent from a two-dimensional reaction--diffusion process modelled via a finite lattice dynamical system, as well as an analogous PDE system, involving spatially nonlocal interactions. These models govern the evolution of cells in a bioactive porous medium, with evolution of the local cell density depending on a coupled quasi--static fluid flow problem. We demonstrate differenc…
▽ More
We study dynamics emergent from a two-dimensional reaction--diffusion process modelled via a finite lattice dynamical system, as well as an analogous PDE system, involving spatially nonlocal interactions. These models govern the evolution of cells in a bioactive porous medium, with evolution of the local cell density depending on a coupled quasi--static fluid flow problem. We demonstrate differences emergent from the choice of a discrete lattice or a continuum for the spatial domain of such a process. We find long--time oscillations and steady states in cell density in both lattice and continuum models, but that the continuum model only exhibits solutions with vertical symmetry, independent of initial data, whereas the finite lattice admits asymmetric oscillations and steady states arising from symmetry-breaking bifurcations. We conjecture that it is the structure of the finite lattice which allows for more complicated asymmetric dynamics. Our analysis suggests that the origin of both types of oscillations is a nonlocal reaction-diffusion mechanism mediated by quasi-static fluid flow.
△ Less
Submitted 4 June, 2018; v1 submitted 24 February, 2017;
originally announced February 2017.
-
Lattice and Continuum Modelling of a Bioactive Porous Tissue Scaffold
Authors:
Andrew L. Krause,
Dmitry Beliaev,
Robert A. Van Gorder,
Sarah L. Waters
Abstract:
A contemporary procedure to grow artificial tissue is to seed cells onto a porous biomaterial scaffold and culture it within a perfusion bioreactor to facilitate the transport of nutrients to growing cells. Typical models of cell growth for tissue engineering applications make use of spatially homogeneous or spatially continuous equations to model cell growth, flow of culture medium, nutrient tran…
▽ More
A contemporary procedure to grow artificial tissue is to seed cells onto a porous biomaterial scaffold and culture it within a perfusion bioreactor to facilitate the transport of nutrients to growing cells. Typical models of cell growth for tissue engineering applications make use of spatially homogeneous or spatially continuous equations to model cell growth, flow of culture medium, nutrient transport, and their interactions. The network structure of the physical porous scaffold is often incorporated through parameters in these models, either phenomenologically or through techniques like mathematical homogenization. We derive a model on a square grid lattice to demonstrate the importance of explicitly modelling the network structure of the porous scaffold, and compare results from this model with those from a modified continuum model from the literature. We capture two-way coupling between cell growth and fluid flow by allowing cells to block pores, and by allowing the shear stress of the fluid to affect cell growth and death. We explore a range of parameters for both models, and demonstrate quantitative and qualitative differences between predictions from each of these approaches, including spatial pattern formation and local oscillations in cell density present only in the lattice model. These differences suggest that for some parameter regimes, corresponding to specific cell types and scaffold geometries, the lattice model gives qualitatively different model predictions than typical continuum models. Our results inform model selection for bioactive porous tissue scaffolds, aiding in the development of successful tissue engineering experiments and eventually clinically successful technologies.
△ Less
Submitted 29 April, 2018; v1 submitted 24 February, 2017;
originally announced February 2017.
-
On the boundary layer structure near a highly permeable porous interface
Authors:
Mohit P. Dalwadi,
S. Jonathan Chapman,
Sarah L. Waters,
James M. Oliver
Abstract:
The method of matched asymptotic expansions is used to study the canonical problem of steady laminar flow through a narrow two-dimensional channel blocked by a tight-fitting finite-length highly permeable porous obstacle. We investigate the behaviour of the local flow close to the interface between the single-phase and porous regions (governed by the incompressible Navier--Stokes and Darcy flow eq…
▽ More
The method of matched asymptotic expansions is used to study the canonical problem of steady laminar flow through a narrow two-dimensional channel blocked by a tight-fitting finite-length highly permeable porous obstacle. We investigate the behaviour of the local flow close to the interface between the single-phase and porous regions (governed by the incompressible Navier--Stokes and Darcy flow equations, respectively). We solve for the flow in these inner regions in the limits of low and high Reynolds number, facilitating an understanding of the nature of the transition from Poiseuille to plug to Poiseuille flow in each of these limits. Significant analytic progress is made in the high-Reynolds-number limit, and we explore in detail the rich boundary layer structure that occurs. We consider the three-dimensional generalization to unsteady laminar flow through and around a tight-fitting highly permeable cylindrical porous obstacle within a Hele-Shaw cell. For the high-Reynolds-number limit, we give the coupling conditions and interfacial stress in terms of the outer flow variables, allowing information from a nonlinear three-dimensional problem to be obtained by solving a linear two-dimensional problem. Finally, we illustrate the utility of our analysis by considering the specific example of time-dependent forced far-field flow in a Hele-Shaw cell containing a porous cylinder with a circular cross-section. We determine the internal stress within the porous obstacle, which is key for tissue engineering applications, and the interfacial stress on the boundary of the porous obstacle, which has applications to biofilm erosion. In the high-Reynolds-number limit, we demonstrate that the fluid inertia can result in the cylinder experiencing a time-independent net force, even when the far-field forcing is periodic with zero mean.
△ Less
Submitted 2 December, 2016; v1 submitted 14 July, 2015;
originally announced July 2015.
