Showing 1–50 of 142 results for author: Wall, A

Bayesian Windkessel calibration using optimized 0D surrogate models

Authors: Jakob Richter, Jonas Nitzler, Luca Pegolotti, Karthik Menon, Jonas Biehler, Wolfgang A. Wall, Daniele E. Schiavazzi, Alison L. Marsden, Martin R. Pfaller

Abstract: Boundary condition (BC) calibration to assimilate clinical measurements is an essential step in any subject-specific simulation of cardiovascular fluid dynamics. Bayesian calibration approaches have successfully quantified the uncertainties inherent in identified parameters. Yet, routinely estimating the posterior distribution for all BC parameters in 3D simulations has been unattainable due to th… ▽ More Boundary condition (BC) calibration to assimilate clinical measurements is an essential step in any subject-specific simulation of cardiovascular fluid dynamics. Bayesian calibration approaches have successfully quantified the uncertainties inherent in identified parameters. Yet, routinely estimating the posterior distribution for all BC parameters in 3D simulations has been unattainable due to the infeasible computational demand. We propose an efficient method to identify Windkessel parameter posteriors using results from a single high-fidelity three-dimensional (3D) model evaluation. We only evaluate the 3D model once for an initial choice of BCs and use the result to create a highly accurate zero-dimensional (0D) surrogate. We then perform Sequential Monte Carlo (SMC) using the optimized 0D model to derive the high-dimensional Windkessel BC posterior distribution. We validate this approach in a publicly available dataset of N=72 subject-specific vascular models. We found that optimizing 0D models to match 3D data a priori lowered their median approximation error by nearly one order of magnitude. In a subset of models, we confirm that the optimized 0D models still generalize to a wide range of BCs. Finally, we present the high-dimensional Windkessel parameter posterior for different measured signal-to-noise ratios in a vascular model using SMC. We further validate that the 0D-derived posterior is a good approximation of the 3D posterior. The minimal computational demand of our method using a single 3D simulation, combined with the open-source nature of all software and data used in this work, will increase access and efficiency of Bayesian Windkessel calibration in cardiovascular fluid dynamics simulations. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Adaptive integration of history variables in constrained mixture models for organ-scale growth and remodeling

Authors: Amadeus M. Gebauer, Martin R. Pfaller, Jason M. Szafron, Wolfgang A. Wall

Abstract: In the last decades, many computational models have been developed to predict soft tissue growth and remodeling (G&R). The constrained mixture theory describes fundamental mechanobiological processes in soft tissue G&R and has been widely adopted in cardiovascular models of G&R. However, even after two decades of work, large organ-scale models are rare, mainly due to high computational costs (mode… ▽ More In the last decades, many computational models have been developed to predict soft tissue growth and remodeling (G&R). The constrained mixture theory describes fundamental mechanobiological processes in soft tissue G&R and has been widely adopted in cardiovascular models of G&R. However, even after two decades of work, large organ-scale models are rare, mainly due to high computational costs (model evaluation and memory consumption), especially in long-range simulations. We propose two strategies to adaptively integrate history variables in constrained mixture models to enable large organ-scale simulations of G&R. Both strategies exploit that the influence of deposited tissue on the current mixture decreases over time through degradation. One strategy is independent of external loading, allowing the estimation of the computational resources ahead of the simulation. The other adapts the history snapshots based on the local mechanobiological environment so that the additional integration errors can be controlled and kept negligibly small, even in G&R scenarios with severe perturbations. We analyze the adaptively integrated constrained mixture model on a tissue patch for a parameter study and show the performance under different G&R scenarios. To confirm that adaptive strategies enable large organ-scale examples, we show simulations of different hypertension conditions with a real-world example of a biventricular heart discretized with a finite element mesh. In our example, adaptive integrations sped up simulations by a factor of three and reduced memory requirements to one-sixth. The reduction of the computational costs gets even more pronounced for simulations over longer periods. Adaptive integration of the history variables allows studying more finely resolved models and longer G&R periods while computational costs are drastically reduced and largely constant in time. △ Less

Submitted 11 July, 2024; v1 submitted 15 April, 2024; originally announced April 2024.

High-performance matrix-free unfitted finite element operator evaluation

Authors: Maximilian Bergbauer, Peter Munch, Wolfgang A. Wall, Martin Kronbichler

Abstract: Unfitted finite element methods, like CutFEM, have traditionally been implemented in a matrix-based fashion, where a sparse matrix is assembled and later applied to vectors while solving the resulting linear system. With the goal of increasing performance and enabling algorithms with polynomial spaces of higher degrees, this contribution chooses a more abstract approach by matrix-free evaluation o… ▽ More Unfitted finite element methods, like CutFEM, have traditionally been implemented in a matrix-based fashion, where a sparse matrix is assembled and later applied to vectors while solving the resulting linear system. With the goal of increasing performance and enabling algorithms with polynomial spaces of higher degrees, this contribution chooses a more abstract approach by matrix-free evaluation of the operator action on vectors instead. The proposed method loops over cells and locally evaluates the cell, face, and interface integrals, including the contributions from cut cells and the different means of stabilization. The main challenge is the efficient numerical evaluation of terms in the weak form with unstructured quadrature points arising from the unfitted discretization in cells cut by the interface. We present design choices and performance optimizations for tensor-product elements and demonstrate the performance by means of benchmarks and application examples. We demonstrate a speedup of more than one order of magnitude for the operator evaluation of a discontinuous Galerkin discretization with polynomial degree three compared to a sparse matrix-vector product and develop performance models to quantify the performance properties over a wide range of polynomial degrees. △ Less

Submitted 12 April, 2024; v1 submitted 11 April, 2024; originally announced April 2024.

MSC Class: 65N30; 65Y20; 65Y05; 68W10

A highly efficient computational approach for part-scale microstructure predictions in Ti-6Al-4V additive manufacturing

Authors: Sebastian D. Proell, Julian Brotz, Martin Kronbichler, Wolfgang A. Wall, Christoph Meier

Abstract: Fast and efficient simulations of metal additive manufacturing (AM) processes are highly relevant to exploring the full potential of this promising manufacturing technique. The microstructure composition plays an important role in characterizing the part quality and deriving mechanical properties. When complete parts are simulated, one often needs to resort to strong simplifications such as layer-… ▽ More Fast and efficient simulations of metal additive manufacturing (AM) processes are highly relevant to exploring the full potential of this promising manufacturing technique. The microstructure composition plays an important role in characterizing the part quality and deriving mechanical properties. When complete parts are simulated, one often needs to resort to strong simplifications such as layer-wise heating due to the large number of simulated time steps compared to the small time step sizes. This article proposes a scan-resolved approach to the coupled thermo-microstructural problem. Building on a highly efficient thermal model, we discuss the implementation of a phenomenological microstructure model for the evolution of the three main constituents of Ti-6Al-4V: stable $α_s$-phase, martensite $α_m$-phase and $β$-phase. The implementation is tailored to modern hardware features using vectorization and fast approximations of transcendental functions. A performance model and numerical examples verify the high degree of optimization. We demonstrate the applicability and predictive power of the approach and the influence of scan strategy and geometry. Depending on the specific example, results can be obtained with moderate computational resources in a few hours to days. The numerical examples include a prediction of the microstructure on the full NIST AM Benchmark cantilever specimen. △ Less

Submitted 27 February, 2024; originally announced February 2024.

Linearised Second Law for Higher Curvature Gravity and Non-Minimally Coupled Vector Fields

Authors: Aron C. Wall, Zihan Yan

Abstract: Expanding the work of arXiv:1504.08040, we show that black holes obey a second law for linear perturbations to bifurcate Killing horizons, in any covariant higher curvature gravity coupled to scalar and vector fields. The vector fields do not need to be gauged, and (like the scalars) can have arbitrary non-minimal couplings to the metric. The increasing entropy has a natural expression in covarian… ▽ More Expanding the work of arXiv:1504.08040, we show that black holes obey a second law for linear perturbations to bifurcate Killing horizons, in any covariant higher curvature gravity coupled to scalar and vector fields. The vector fields do not need to be gauged, and (like the scalars) can have arbitrary non-minimal couplings to the metric. The increasing entropy has a natural expression in covariant phase space language, which makes it manifestly invariant under JKM ambiguities. An explicit entropy formula is given for f(Riemann) gravity coupled to vectors, where at most one derivative acts on each vector. Besides the previously known curvature terms, there are three extra terms involving differentiating the Lagrangian by the symmetric vector derivative (which therefore vanish for gauge fields). △ Less

Submitted 28 April, 2024; v1 submitted 8 February, 2024; originally announced February 2024.

Comments: 38 pages, 2 figures, 2 tables; references and comments added in v2

Improved accuracy of continuum surface flux models for metal additive manufacturing melt pool simulations

Authors: Nils Much, Magdalena Schreter-Fleischhacker, Peter Munch, Martin Kronbichler, Wolfgang A. Wall, Christoph Meier

Abstract: Computational modeling of the melt pool dynamics in laser-based powder bed fusion metal additive manufacturing (PBF-LB/M) promises to shed light on fundamental mechanisms of defect generation. These processes are accompanied by rapid evaporation so that the evaporation-induced recoil pressure and cooling arise as major driving forces for fluid dynamics and temperature evolution. The magnitude of t… ▽ More Computational modeling of the melt pool dynamics in laser-based powder bed fusion metal additive manufacturing (PBF-LB/M) promises to shed light on fundamental mechanisms of defect generation. These processes are accompanied by rapid evaporation so that the evaporation-induced recoil pressure and cooling arise as major driving forces for fluid dynamics and temperature evolution. The magnitude of these interface fluxes depends exponentially on the melt pool surface temperature, which, therefore, has to be predicted with high accuracy. The present work utilizes a diffuse interface finite element model based on a continuum surface flux (CSF) description of interface fluxes to study dimensionally reduced thermal two-phase problems representative for PBF-LB/M in a finite element framework. It is demonstrated that the extreme temperature gradients combined with the high ratios of material properties between metal and ambient gas lead to significant errors in the interface temperatures and fluxes when classical CSF approaches, along with typical interface thicknesses and discretizations, are applied. It is expected that this finding is also relevant for other types of diffuse interface PBF-LB/M melt pool models. A novel parameter-scaled CSF approach is proposed, which is constructed to yield a smoother temperature field in the diffuse interface region, significantly increasing the solution accuracy. The interface thickness required to predict the temperature field with a given level of accuracy is less restrictive by at least one order of magnitude for the proposed parameter-scaled approach compared to classical CSF, drastically reducing computational costs. Finally, we showcase the general applicability of the parameter-scaled CSF to a 3D simulation of stationary laser melting of PBF-LB/M considering the fully coupled thermo-hydrodynamic multi-phase problem, including phase change. △ Less

Submitted 12 July, 2024; v1 submitted 22 January, 2024; originally announced January 2024.

A consistent diffuse-interface model for two-phase flow problems with rapid evaporation

Authors: Magdalena Schreter-Fleischhacker, Peter Munch, Nils Much, Martin Kronbichler, Wolfgang A. Wall, Christoph Meier

Abstract: We present accurate and mathematically consistent formulations of a diffuse-interface model for two-phase flow problems involving rapid evaporation. The model addresses challenges including discontinuities in the density field by several orders of magnitude, leading to high velocity and pressure jumps across the liquid-vapor interface, along with dynamically changing interface topologies. To this… ▽ More We present accurate and mathematically consistent formulations of a diffuse-interface model for two-phase flow problems involving rapid evaporation. The model addresses challenges including discontinuities in the density field by several orders of magnitude, leading to high velocity and pressure jumps across the liquid-vapor interface, along with dynamically changing interface topologies. To this end, we integrate an incompressible Navier--Stokes solver combined with a conservative level-set formulation and a regularized, i.e., diffuse, representation of discontinuities into a matrix-free adaptive finite element framework. The achievements are three-fold: First, this work proposes mathematically consistent definitions for the level-set transport velocity in the diffuse interface region by extrapolating the velocity from the liquid or gas phase, which exhibit superior prediction accuracy for the evaporated mass and the resulting interface dynamics compared to a local velocity evaluation, especially for highly curved interfaces. Second, we show that accurate prediction of the evaporation-induced pressure jump requires a consistent, namely a reciprocal, density interpolation across the interface, which satisfies local mass conservation. Third, the combination of diffuse interface models for evaporation with standard Stokes-type constitutive relations for viscous flows leads to significant pressure artifacts in the diffuse interface region. To mitigate these, we propose a modification for such constitutive model types. Through selected analytical and numerical examples, the aforementioned properties are validated. The presented model promises new insights in simulation-based prediction of melt-vapor interactions in thermal multiphase flows such as in laser-based powder bed fusion of metals. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Comments: 52 pages, 19 figures

A conservative and efficient model for grain boundaries of solid electrolytes in a continuum model for solid-state batteries

Authors: Stephan Sinzig, Christoph P. Schmidt, Wolfgang A. Wall

Abstract: A formulation is presented to efficiently model ionic conduction inside, i.e. across and along, grain boundaries. Efficiency and accuracy is achieved by reducing it to a two-dimensional manifold while guaranteeing the conservation of mass and charge at the intersection of multiple grain boundaries. The formulation treats the electric field and the electric current as independent solution variables… ▽ More A formulation is presented to efficiently model ionic conduction inside, i.e. across and along, grain boundaries. Efficiency and accuracy is achieved by reducing it to a two-dimensional manifold while guaranteeing the conservation of mass and charge at the intersection of multiple grain boundaries. The formulation treats the electric field and the electric current as independent solution variables. We elaborate on the numerical challenges this formulation implies and compare the computed solution with results from an analytical solution by quantifying the convergence towards the exact solution. Towards the end of this work, the model is firstly applied to setups with extreme values of crucial parameters of grain boundaries to study the influence of the ionic conduction in the grain boundary on the overall battery cell voltage and, secondly, to a realistic microstructure to show the capabilities of the formulation. △ Less

Submitted 12 January, 2024; originally announced January 2024.

Binary Endogenous Treatment in Stochastic Frontier Models with an Application to Soil Conservation in El Salvador

Authors: Samuele Centorrino, Maria Pérez-Urdiales, Boris Bravo-Ureta, Alan J. Wall

Abstract: Improving the productivity of the agricultural sector is part of one of the Sustainable Development Goals set by the United Nations. To this end, many international organizations have funded training and technology transfer programs that aim to promote productivity and income growth, fight poverty and enhance food security among smallholder farmers in develo** countries. Stochastic production fr… ▽ More Improving the productivity of the agricultural sector is part of one of the Sustainable Development Goals set by the United Nations. To this end, many international organizations have funded training and technology transfer programs that aim to promote productivity and income growth, fight poverty and enhance food security among smallholder farmers in develo** countries. Stochastic production frontier analysis can be a useful tool when evaluating the effectiveness of these programs. However, accounting for treatment endogeneity, often intrinsic to these interventions, only recently has received any attention in the stochastic frontier literature. In this work, we extend the classical maximum likelihood estimation of stochastic production frontier models by allowing both the production frontier and inefficiency to depend on a potentially endogenous binary treatment. We use instrumental variables to define an assignment mechanism for the treatment, and we explicitly model the density of the first and second-stage composite error terms. We provide empirical evidence of the importance of controlling for endogeneity in this setting using farm-level data from a soil conservation program in El Salvador. △ Less

Submitted 21 December, 2023; originally announced December 2023.

Journal ref: Journal of Applied Econometrics, 2023

Solving Bayesian Inverse Problems With Expensive Likelihoods Using Constrained Gaussian Processes and Active Learning

Authors: Maximilian Dinkel, Carolin M. Geitner, Gil Robalo Rei, Jonas Nitzler, Wolfgang A. Wall

Abstract: Solving inverse problems using Bayesian methods can become prohibitively expensive when likelihood evaluations involve complex and large scale numerical models. A common approach to circumvent this issue is to approximate the forward model or the likelihood function with a surrogate model. But also there, due to limited computational resources, only a few training points are available in many prac… ▽ More Solving inverse problems using Bayesian methods can become prohibitively expensive when likelihood evaluations involve complex and large scale numerical models. A common approach to circumvent this issue is to approximate the forward model or the likelihood function with a surrogate model. But also there, due to limited computational resources, only a few training points are available in many practically relevant cases. Thus, it can be advantageous to model the additional uncertainties of the surrogate in order to incorporate the epistemic uncertainty due to limited data. In this paper, we develop a novel approach to approximate the log likelihood by a constrained Gaussian process based on prior knowledge about its boundedness. This improves the accuracy of the surrogate approximation without increasing the number of training samples. Additionally, we introduce a formulation to integrate the epistemic uncertainty due to limited training points into the posterior density approximation. This is combined with a state of the art active learning strategy for selecting training points, which allows to approximate posterior densities in higher dimensions very efficiently. We demonstrate the fast convergence of our approach for a benchmark problem and infer a random field that is discretized by 30 parameters using only about 1000 model evaluations. In a practically relevant example, the parameters of a reduced lung model are calibrated based on flow observations over time and voltage measurements from a coupled electrical impedance tomography simulation. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Comments: 21 pages, 15 figures

What if Quantum Gravity is "just'' Quantum Information Theory?

Authors: Aron C. Wall

Abstract: I suggest the possibility that holographic quantum gravity is, in some sense, equivalent to quantum information theory. Some radical implications would follow. First, the theory of quantum gravity should have no adjustable coupling constants, similar to string theory. Thus, all complete bulk theories of quantum gravity are dual to each other. By setting up an appropriately entangled state, it shou… ▽ More I suggest the possibility that holographic quantum gravity is, in some sense, equivalent to quantum information theory. Some radical implications would follow. First, the theory of quantum gravity should have no adjustable coupling constants, similar to string theory. Thus, all complete bulk theories of quantum gravity are dual to each other. By setting up an appropriately entangled state, it should be possible to find wormholes connecting any two quantum gravity theories (e.g. string theory and loop quantum gravity). Secondly, if we represent space at one time as a tensor network, then dynamics is automatically encoded via gauge-equivalent descriptions of the boundary state. This would appear to imply, contrary to semiclassical expectations, that a closed universe should have only one state. △ Less

Submitted 4 October, 2023; originally announced October 2023.

Comments: 6 pages, 2 figures. Additional references added to arxiv version

Journal ref: Proc. 28th Solvay Conf. Phys., ed. D. Gross, A. Sevrin, P. Zoller, World Scientific Publishing Co., Singapore, 2023

An efficient computational model of the in-flow capturing of magnetic nanoparticles by a cylindrical magnet for cancer nanomedicine

Authors: Barbara Wirthl, Vitaly Wirthl, Wolfgang A. Wall

Abstract: Magnetic nanoparticles have emerged as a promising approach to improving cancer treatment. However, many novel nanoparticle designs fail in clinical trials due to a lack of understanding of how to overcome the in vivo transport barriers. To address this shortcoming, we develop a novel computational model aimed at the study of magnetic nanoparticles in vitro and in vivo. In this paper, we present a… ▽ More Magnetic nanoparticles have emerged as a promising approach to improving cancer treatment. However, many novel nanoparticle designs fail in clinical trials due to a lack of understanding of how to overcome the in vivo transport barriers. To address this shortcoming, we develop a novel computational model aimed at the study of magnetic nanoparticles in vitro and in vivo. In this paper, we present an important building block for this overall goal, namely an efficient computational model of the in-flow capture of magnetic nanoparticles by a cylindrical permanent magnet in an idealised test setup. We use a continuum approach based on the Smoluchowski advection-diffusion equation, combined with a simple approach to consider the capture at an impenetrable boundary, and derive an analytical expression for the magnetic force of a cylindrical magnet of finite length on the nanoparticles. This provides a simple and numerically efficient way to study different magnet configurations and their influence on the nanoparticle distribution in three dimensions. Such an in silico model can increase insight into the underlying physics, help to design novel prototypes and serve as a precursor to more complex systems in vivo and in silico. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Journal ref: Physical Review E, 109 (2024), 065309

A novel mesh regularization approach based on finite element distortion potentials: Application to material expansion processes with extreme volume change

Authors: Abhiroop Satheesh, Christoph P. Schmidt, Wolfgang A. Wall, Christoph Meier

Abstract: The accuracy of finite element solutions is closely tied to the mesh quality. In particular, geometrically nonlinear problems involving large and strongly localized deformations often result in prohibitively large element distortions. In this work, we propose a novel mesh regularization approach allowing to restore a non-distorted high-quality mesh in an adaptive manner without the need for expens… ▽ More The accuracy of finite element solutions is closely tied to the mesh quality. In particular, geometrically nonlinear problems involving large and strongly localized deformations often result in prohibitively large element distortions. In this work, we propose a novel mesh regularization approach allowing to restore a non-distorted high-quality mesh in an adaptive manner without the need for expensive re-meshing procedures. The core idea of this approach lies in the definition of a finite element distortion potential considering contributions from different distortion modes such as skewness and aspect ratio of the elements. The regularized mesh is found by minimization of this potential. Moreover, based on the concept of spatial localization functions, the method allows to specify tailored requirements on mesh resolution and quality for regions with strongly localized mechanical deformation and mesh distortion. In addition, while existing mesh regularization schemes often keep the boundary nodes of the discretization fixed, we propose a mesh-sliding algorithm based on variationally consistent mortar methods allowing for an unrestricted tangential motion of nodes along the problem boundary. Especially for problems involving significant surface deformation (e.g., frictional contact), this approach allows for an improved mesh relaxation as compared to schemes with fixed boundary nodes. To transfer data such as tensor-valued history variables of the material model from the old (distorted) to the new (regularized) mesh, a structure-preserving invariant interpolation scheme for second-order tensors is employed, which has been proposed in our previous work and is designed to preserve important mechanical properties of tensor-valued data such as objectivity and positive definiteness... {continued see pdf} △ Less

Submitted 29 May, 2024; v1 submitted 14 July, 2023; originally announced July 2023.

In silico high-resolution whole lung model to predict the locally delivered dose of inhaled drugs

Authors: Maximilian J. Grill, Jonas Biehler, Karl-Robert Wichmann, David Rudlstorfer, Maximilian Rixner, Marie Brei, Jakob Richter, Joshua Bügel, Nina Pischke, Wolfgang A. Wall, Kei W. Müller

Abstract: The big crux with drug delivery to human lungs is that the delivered dose at the local site of action is unpredictable and very difficult to measure, even a posteriori. It is highly subject-specific as it depends on lung morphology, disease, breathing, and aerosol characteristics. Given these challenges, computational approaches have shown potential, but have so far failed due to fundamental metho… ▽ More The big crux with drug delivery to human lungs is that the delivered dose at the local site of action is unpredictable and very difficult to measure, even a posteriori. It is highly subject-specific as it depends on lung morphology, disease, breathing, and aerosol characteristics. Given these challenges, computational approaches have shown potential, but have so far failed due to fundamental methodical limitations. We present and validate a novel in silico model that enables the subject-specific prediction of local aerosol deposition throughout the entire lung. Its unprecedented spatiotemporal resolution allows to track each aerosol particle anytime during the breathing cycle, anywhere in the complete system of conducting airways and the alveolar region. Predictions are shown to be in excellent agreement with in vivo SPECT/CT data for a healthy human cohort. We further showcase the model's capabilities to represent strong heterogeneities in diseased lungs by studying an IPF patient. Finally, high computational efficiency and automated model generation and calibration ensure readiness to be applied at scale. We envision our method not only to improve inhalation therapies by informing and accelerating all stages of (pre-)clinical drug and device development, but also as a more-than-equivalent alternative to nuclear imaging of the lungs. △ Less

Submitted 11 July, 2023; v1 submitted 7 July, 2023; originally announced July 2023.

An efficient approach to include transport effects in thin coating layers in electrochemo-mechanical models for all-solid-state batteries

Authors: Stephan Sinzig, Christoph P. Schmidt, Wolfgang A. Wall

Abstract: A novel approach is presented to efficiently include transport effects in thin active material coating layers of all-solid-state batteries using a dimensionally reduced formulation embedded into a three-dimensionally resolved coupled electrochemo-mechanical continuum model. In the literature, the effect of coating layers is so far captured by additional zero-dimensional resistances to circumvent t… ▽ More A novel approach is presented to efficiently include transport effects in thin active material coating layers of all-solid-state batteries using a dimensionally reduced formulation embedded into a three-dimensionally resolved coupled electrochemo-mechanical continuum model. In the literature, the effect of coating layers is so far captured by additional zero-dimensional resistances to circumvent the need for an extremely fine mesh resolution. However, a zero-dimensional resistance cannot capture transport phenomena along the coating layer, which can become significant, as we will show in this work. Thus, we propose a model which resolves the thin coating layer in a two-dimensional manifold based on model assumptions in the direction of the thickness. This two-dimensional formulation is monolithically coupled with a three-dimensional model representing the other components of a battery cell. The approach is validated by showing conservation properties and convergence and by comparing the results with those computed with a fully resolved model. Results for realistic microstructures of a battery cell, including coating layers as well as design recommendations for a preferred coating layer, are presented. Based on those results, we show that existing modeling approaches feature remarkable errors when transport along the coating layer is significant, whereas the novel approach resolves this. △ Less

Submitted 5 July, 2023; originally announced July 2023.

Exploration of improved, roller-based spreading strategies for cohesive powders in additive manufacturing via coupled DEM-FEM simulations

Authors: Reimar Weissbach, Patrick M. Praegla, Wolfgang A. Wall, A. John Hart, Christoph Meier

Abstract: Spreading of fine (D50 <=20um) powders into thin layers typically requires a mechanism such as a roller to overcome the cohesive forces between particles. Roller-based spreading requires careful optimization and can result in low density and/or inconsistent layers depending on the characteristics of the powder feedstock. Here, we explore improved, roller-based spreading strategies for highly cohes… ▽ More Spreading of fine (D50 <=20um) powders into thin layers typically requires a mechanism such as a roller to overcome the cohesive forces between particles. Roller-based spreading requires careful optimization and can result in low density and/or inconsistent layers depending on the characteristics of the powder feedstock. Here, we explore improved, roller-based spreading strategies for highly cohesive powders using an integrated discrete element-finite element (DEM-FEM) framework. Powder characteristics are emulated using a self-similarity approach based on experimental calibration for a Ti-6Al-4V 0-20um powder. We find that optimal roller-based spreading relies on a combination of surface friction of the roller and roller kinematics that impart sufficient kinetic energy to break cohesive bonds between powder particles. However, excess rotation can impart excessive kinetic energy, causing ejection of particles and a non-uniform layer. Interestingly, the identified optimal surface velocities for counter-rotation as well as rotational oscillation are very similar, suggesting this quantity as the critical kinematic parameter. When these conditions are chosen appropriately, layers with packing fractions beyond 50% are predicted for layer thicknesses as small as ~2 times D90 of the exemplary powder, and the layer quality is robust with respect to substrate adhesion over a 10-fold range. The latter is an important consideration given the spatially varying substrate conditions in AM due to the combination of fused/bound and bare powder regions. As compared to counter-rotation, the proposed rotational oscillation is particularly attractive because it can overcome practical issues with mechanical runout of roller mechanisms. In particular, the application to rubber-coated rollers, which promises to reduce the risk of tool damage and particle streaking, is recommended for future investigation. △ Less

Submitted 2 April, 2024; v1 submitted 9 June, 2023; originally announced June 2023.

Pressure- and time-dependent alveolar recruitment/derecruitment in a spatially resolved patient-specific computational model for injured human lungs

Authors: Carolin M. Geitner, Lea J. Köglmeier, Inéz Frerichs, Patrick Langguth, Matthias Lindner, Dirk Schädler, Norbert Weiler, Tobias Becher, Wolfgang A. Wall

Abstract: We present a novel computational model for the dynamics of alveolar recruitment/derecruitment (RD), which reproduces the underlying characteristics typically observed in injured lungs. The basic idea is a pressure- and time-dependent variation of the stress-free reference volume in reduced dimensional viscoelastic elements representing the acinar tissue. We choose a variable reference volume trigg… ▽ More We present a novel computational model for the dynamics of alveolar recruitment/derecruitment (RD), which reproduces the underlying characteristics typically observed in injured lungs. The basic idea is a pressure- and time-dependent variation of the stress-free reference volume in reduced dimensional viscoelastic elements representing the acinar tissue. We choose a variable reference volume triggered by critical opening and closing pressures in a time-dependent manner from a straightforward mechanical point of view. In the case of (partially and progressively) collapsing alveolar structures, the volume available for expansion during breathing reduces and vice versa, eventually enabling consideration of alveolar collapse and reopening in our model. We further introduce a method for patient-specific determination of the underlying critical parameters of the new alveolar RD dynamics when integrated into the tissue elements, referred to as terminal units, of a spatially resolved physics-based lung model that simulates the human respiratory system in an anatomically correct manner. Relevant patient-specific parameters of the terminal units are herein determined based on medical image data and the macromechanical behavior of the lung during artificial ventilation. We test the whole modeling approach for a real-life scenario by applying it to the clinical data of a mechanically ventilated patient. The generated lung model is capable of reproducing clinical measurements such as tidal volume and pleural pressure during various ventilation maneuvers. We conclude that this new model is an important step toward personalized treatment of ARDS patients by considering potentially harmful mechanisms - such as cyclic RD and overdistension - and might help in the development of relevant protective ventilation strategies to reduce ventilator-induced lung injury (VILI). △ Less

Submitted 15 September, 2023; v1 submitted 23 May, 2023; originally announced May 2023.

Towards Additively Manufactured Metamaterials with Powder Inclusions for Controllable Dissipation: The Critical Influence of Packing Density

Authors: Patrick M. Praegla, Thomas Mair, Andreas Wimmer, Sebastian L. Fuchs, Niklas Fehn, Michael F. Zaeh, Wolfgang A. Wall, Christoph Meier

Abstract: Particle dampers represent a simple yet effective means to reduce unwanted oscillations when attached to structural components. Powder bed fusion additive manufacturing of metals allows to integrate particle inclusions of arbitrary shape, size and spatial distribution directly into bulk material, giving rise to novel metamaterials with controllable dissipation without the need for additional exter… ▽ More Particle dampers represent a simple yet effective means to reduce unwanted oscillations when attached to structural components. Powder bed fusion additive manufacturing of metals allows to integrate particle inclusions of arbitrary shape, size and spatial distribution directly into bulk material, giving rise to novel metamaterials with controllable dissipation without the need for additional external dam** devices. At present, however, it is not well understood how the degree of dissipation is influenced by the properties of the enclosed powder packing. In the present work, a two-way coupled discrete element - finite element model is proposed allowing for the first time to consistently describe the interaction between oscillating deformable structures and enclosed powder packings. As fundamental test case, the free oscillations of a hollow cantilever beam filled with various powder packings differing in packing density, particle size, and surface properties are considered to systematically study these factors of influence. Critically, it is found that the dam** characteristics strongly depend on the packing density of the enclosed powder and that an optimal packing density exists at which the dissipation is maximized. Moreover, it is found that the influence of (absolute) particle size on dissipation is rather small. First-order analytical models for different deformation modes of such powder cavities are derived to shed light on this observation. △ Less

Submitted 16 February, 2023; originally announced February 2023.

A highly efficient computational framework for fast scan-resolved simulations of metal additive manufacturing processes on the scale of real parts

Authors: Sebastian D. Proell, Peter Munch, Martin Kronbichler, Wolfgang A. Wall, Christoph Meier

Abstract: This article proposes a novel high-performance computing approach for the prediction of the temperature field in powder bed fusion (PBF) additive manufacturing processes. In contrast to many existing approaches to part-scale simulations, the underlying computational model consistently resolves physical scan tracks without additional heat source scaling, agglomeration strategies or any other heuris… ▽ More This article proposes a novel high-performance computing approach for the prediction of the temperature field in powder bed fusion (PBF) additive manufacturing processes. In contrast to many existing approaches to part-scale simulations, the underlying computational model consistently resolves physical scan tracks without additional heat source scaling, agglomeration strategies or any other heuristic modeling assumptions. A growing, adaptively refined mesh accurately captures all details of the laser beam motion. Critically, the fine spatial resolution required for resolved scan tracks in combination with the high scan velocities underlying these processes mandates the use of comparatively small time steps to resolve the underlying physics. Explicit time integration schemes are well-suited for this setting, while unconditionally stable implicit time integration schemes are employed for the interlayer cool down phase governed by significantly larger time scales. These two schemes are combined and implemented in an efficient fast operator evaluation framework providing significant performance gains and optimization opportunities. The capabilities of the novel framework are demonstrated through realistic AM examples on the centimeter scale including the first scan-resolved simulation of the entire NIST AM Benchmark cantilever specimen, with a computation time of less than one day. Apart from physical insights gained through these simulation examples, also numerical aspects are thoroughly studied on basis of weak and strong parallel scaling tests. As potential applications, the proposed thermal PBF simulation framework can serve as a basis for microstructure and thermo-mechanical predictions on the part-scale, but also to assess the influence of scan pattern and part geometry on melt pool shape and temperature, which are important indicators for well-known process instabilities. △ Less

Submitted 15 September, 2023; v1 submitted 10 February, 2023; originally announced February 2023.

A Finite Element Formulation to Three-Dimensionally Resolve Space-Charge Layers in Solid Electrolytes

Authors: Stephan Sinzig, Thomas Hollweck, Christoph P. Schmidt, Wolfgang A. Wall

Abstract: All-solid-state batteries are seen as promising candidates to replace conventional batteries with liquid electrolytes in many applications. However, they are not yet feasible for many relevant applications. One particular question of interest is the identification of physical effects inside all-solid-state batteries and their quantitative influence on the performance of the entire battery cell. Si… ▽ More All-solid-state batteries are seen as promising candidates to replace conventional batteries with liquid electrolytes in many applications. However, they are not yet feasible for many relevant applications. One particular question of interest is the identification of physical effects inside all-solid-state batteries and their quantitative influence on the performance of the entire battery cell. Simulation models can contribute to answering the aforementioned question by systematical studies, e.g. enabling or disabling certain physical effects. Especially the influence of space-charge layers (SCLs) is heavily discussed in the scientific community. So far, the different length scales of SCLs and the microstructure of a battery cell made a spatial discretization of realistic microstructures with resolved SCLs infeasible. However, thermodynamically consistent continuum models which are applied to simplified geometries are already established in the literature. In this work, we propose a model that enables the prediction of the spatial development of SCLs within geometrically resolved microstructures by exploiting that effects in SCLs are predominantly one-dimensional. With the proposed approach it is possible to quantify the geometric influence of realistic microstructures on the formation process of SCLs. SCLs in realistic microstructures remarkably differ from SCLs computed with simplified one-dimensional models which are already established in the literature. △ Less

Submitted 14 January, 2023; originally announced January 2023.

An approach to study recruitment/derecruitment dynamics in a patient-specific computational model of an injured human lung

Authors: Carolin M. Geitner, Tobias Becher, Inéz Frerichs, Norbert Weiler, Jason H. T. Bates, Wolfgang A. Wall

Abstract: We present a new approach for physics-based computational modeling of diseased human lungs. Our main object is the development of a model that takes the novel step of incorporating the dynamics of airway recruitment/de-recruitment into an anatomically accurate, spatially resolved model of respiratory system mechanics, and the relation of these dynamics to airway dimensions and the biophysical prop… ▽ More We present a new approach for physics-based computational modeling of diseased human lungs. Our main object is the development of a model that takes the novel step of incorporating the dynamics of airway recruitment/de-recruitment into an anatomically accurate, spatially resolved model of respiratory system mechanics, and the relation of these dynamics to airway dimensions and the biophysical properties of the lining fluid. The importance of our approach is that it potentially allows for more accurate predictions of where mechanical stress foci arise in the lungs, since it is at these locations that injury is thought to arise and propagate from. We match the model to data from a patient with Acute Respiratory Distress Syndrome (ARDS) to demonstrate the potential of the model for revealing the underlying derangements in ARDS in a patient-specific manner. To achieve this, the specific geometry of the lung and its heterogeneous pattern of injury are extracted from medical CT images. The mechanical behavior of the model is tailored to the patient's respiratory mechanics using measured ventilation data. In retrospective simulations of various clinically performed, pressure-driven ventilation profiles, the model adequately reproduces clinical quantities measured in the patient such as tidal volume and change in pleural pressure. The model also exhibits physiologically reasonable lung recruitment dynamics and has the spatial resolution to allow the study of local mechanical quantities such as alveolar strains. This modeling approach advances our ability to perform patient-specific studies in silico, opening the way to personalized therapies that will optimize patient outcomes. △ Less

Submitted 9 May, 2023; v1 submitted 2 December, 2022; originally announced December 2022.

Structure-Preserving Invariant Interpolation Schemes for Invertible Second-Order Tensors

Authors: Abhiroop Satheesh, Christoph P. Schmidt, Wolfgang A. Wall, Christoph Meier

Abstract: Tensor interpolation is an essential step for tensor data analysis in various fields of application and scientific disciplines. In the present work, novel interpolation schemes for general, i.e., symmetric or non-symmetric, invertible square tensors are proposed. Critically, the proposed schemes rely on a combined polar and spectral decomposition of the tensor data… ▽ More Tensor interpolation is an essential step for tensor data analysis in various fields of application and scientific disciplines. In the present work, novel interpolation schemes for general, i.e., symmetric or non-symmetric, invertible square tensors are proposed. Critically, the proposed schemes rely on a combined polar and spectral decomposition of the tensor data $\boldsymbol{T}\!\!=\!\!\boldsymbol{R}\boldsymbol{Q}^T \!\! \boldsymbolΛ \boldsymbol{Q}$, followed by an individual interpolation of the two rotation tensors $\boldsymbol{R}$ and $\boldsymbol{Q}$ and the positive definite diagonal eigenvalue tensor $\boldsymbolΛ$ resulting from this decomposition. Two different schemes are considered for a consistent rotation interpolation within the special orthogonal group $\mathbb{SO}(3)$, either based on relative rotation vectors or quaternions. For eigenvalue interpolation, three different schemes, either based on the logarithmic weighted average, moving least squares or logarithmic moving least squares, are considered. It is demonstrated that the proposed interpolation procedure preserves the structure of a tensor, i.e., $\boldsymbol{R}$ and $\boldsymbol{Q}$ remain orthogonal tensors and $\boldsymbolΛ$ remains a positive definite diagonal tensor during interpolation, as well as scaling and rotational invariance (objectivity). Based on selected numerical examples considering the interpolation of either symmetric or non-symmetric tensors, the proposed schemes are compared to existing approaches such as Euclidean, Log-Euclidean, Cholesky and Log-Cholesky interpolation. In contrast to these existing methods, the proposed interpolation schemes result in smooth and monotonic evolutions of tensor invariants such as determinant, trace, fractional anisotropy (FA), and Hilbert's anisotropy (HA)...{continued see pdf} △ Less

Submitted 28 November, 2022; originally announced November 2022.

Off-Shell Strings II: Black Hole Entropy

Authors: Amr Ahmadain, Aron C. Wall

Abstract: In 1994, Susskind and Uglum argued that it is possible to derive the Bekenstein-Hawking entropy $A/4G_N$ from string theory. In this article we explain the conceptual underpinnings of this argument, while elucidating its relationship to induced gravity and ER=EPR. Following an off-shell calculation by Tseytlin, we explicitly derive the classical closed string effective action from sphere diagrams… ▽ More In 1994, Susskind and Uglum argued that it is possible to derive the Bekenstein-Hawking entropy $A/4G_N$ from string theory. In this article we explain the conceptual underpinnings of this argument, while elucidating its relationship to induced gravity and ER=EPR. Following an off-shell calculation by Tseytlin, we explicitly derive the classical closed string effective action from sphere diagrams at leading order in $α^{\prime}$. We then show how to use this to obtain black hole entropy from the RG flow of the NLSM on conical manifolds. (We also briefly discuss the more problematic ``open string picture'' of Susskind and Uglum, in which strings end on the horizon.) We then compare these off-shell results with the rival ``orbifold replica trick'' using the on-shell $\mathbb{C}/Z_{N}$ background, which does not account for the leading order Bekenstein-Hawking entropy -- unless perhaps tachyons are allowed to condense on the orbifold. Possible connections to the ER=EPR conjecture are explored. Finally, we discuss prospects for various extensions, including prospects for deriving holographic entanglement entropy in the bulk of AdS. △ Less

Submitted 23 July, 2023; v1 submitted 29 November, 2022; originally announced November 2022.

Comments: 24 pages, 6 figures. v2: edited for clarity, added figure 6, corrected typos, and added references

Off-Shell Strings I: S-matrix and Action

Authors: Amr Ahmadain, Aron C. Wall

Abstract: We explain why Tseytlin's off-shell formulation of string theory is well-defined. Although quantizing strings on an off-shell background requires an arbitrary choice of Weyl frame, this choice is not physically significant since it can be absorbed into a field redefinition of the target space fields. The off-shell formalism is particularly subtle at tree-level, due to the treatment of the noncompa… ▽ More We explain why Tseytlin's off-shell formulation of string theory is well-defined. Although quantizing strings on an off-shell background requires an arbitrary choice of Weyl frame, this choice is not physically significant since it can be absorbed into a field redefinition of the target space fields. The off-shell formalism is particularly subtle at tree-level, due to the treatment of the noncompact conformal Killing group SL(2,$\mathbb{C}$) of the sphere. We prove that Tseytlin's sphere prescriptions recover the standard tree-level Lorentzian S-matrix, and show how to extract the stringy $i\varepsilon$ prescription from the UV cutoff on the worldsheet. We also demonstrate that the correct tree-level equations of motion are obtained to all orders in perturbation theory in $g_s$ and $α^{\prime}$, and illuminate the close connection between the string action and the c-theorem. △ Less

Submitted 23 July, 2023; v1 submitted 15 November, 2022; originally announced November 2022.

Comments: 38 pages, 9 figures. v2: edited for clarity especially in section 3.B., added figure 9, corrected typos, and added references

Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Blade-based spreading approaches

Authors: Ryan W. Penny, Daniel Oropeza, Patrick M. Praegla, Reimar Weissbach, Christoph Meier, Wolfgang A. Wall, A. John Hart

Abstract: Spreading uniform and dense layers is of paramount importance to creating high-quality components using powder bed additive manufacturing (AM). Blade-like tools are often employed for spreading powder metal feedstocks, especially in laser powder bed fusion and electron beam melting, where powders are characterized by a D50 of 30 microns or greater. Along with variations in boundary conditions intr… ▽ More Spreading uniform and dense layers is of paramount importance to creating high-quality components using powder bed additive manufacturing (AM). Blade-like tools are often employed for spreading powder metal feedstocks, especially in laser powder bed fusion and electron beam melting, where powders are characterized by a D50 of 30 microns or greater. Along with variations in boundary conditions introduced by the layer-wise geometry and surface topography of the printed component, stochastic interactions between the spreading tool and powder result in spatial variations of layer quality that are still not well understood. Here, to study powder spreading under conditions representative of powder bed AM, we employ a modular, mechanized apparatus to create powder layers from moderately and highly cohesive powders with a selection of blade-like spreading tools. Powder layer effective depth is spatially mapped using transmission X-ray imaging, and uniformity is quantified via a statistical approach. We first compare layer density, or the effective depth of powder layer, and show that blade geometries with a curved profile lead to increased material deposition. Second, this approach enables quantification of local fluctuations, or layer defect severity. For example, we observe that the primary benefit of a V-shaped rubber blade, as compared to a 45 degree rigid blade, lies in enabling local deflection of the blade edge to eliminate streaking from large particles, while also increasing deposition. Additionally, we employ a custom DEM simulation to elucidate the opposing roles of particle density and surface energy with a pseudo-material approach, where the balance of inertial and cohesive forces determine macro-scale powder flowability. For specific alloy densities, we find a critical surface energy beyond which layer density is greatly impaired when powder spreading is performed using a blade. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Quantitative analysis of thin metal powder layers via transmission X-ray imaging and discrete element simulation: Roller-based spreading approaches

Authors: Ryan W. Penny, Daniel Oropeza, Reimar Weissbach, Patrick M. Praegla, Christoph Meier, Wolfgang A. Wall, A. John Hart

Abstract: A variety of tools can be used for spreading metal, ceramic, and polymer feedstocks in powder bed additive manufacturing methods. Rollers are often employed when spreading powders with limited flowability, as arises in powders comprising fine particle sizes or high surface energy materials. Here, we study roller-based powder spreading for powder bed AM using the unique combination of a purpose-bui… ▽ More A variety of tools can be used for spreading metal, ceramic, and polymer feedstocks in powder bed additive manufacturing methods. Rollers are often employed when spreading powders with limited flowability, as arises in powders comprising fine particle sizes or high surface energy materials. Here, we study roller-based powder spreading for powder bed AM using the unique combination of a purpose-built powder spreading testbed with a proven method for X-ray map** of powder layer depth. We focus on the density and uniformity of nominally 100 micrometer thick layers of roller-spread Ti-6Al-4V and Al-10Si-Mg powders. Our results indicate that when rotation is too rapid, roller-applied shear force impedes the creation of dense and uniform layers from powders of high innate flowability, or where inertial forces driven by particle density dominate cohesive forces. Roller counter-rotation augments the uniformity of cohesive powder layers, primarily though reducing the influence of particle clusters in the flowing powder, which are otherwise shown to cause deep, trench-like streaks. Companion discrete element method (DEM) simulations further contextualize the experiments through isolation of the effects of cohesion on layer attributes. Results suggest that roller motion parameters could apply a strategic level of additional shear force to the flowing powder, thereby mitigating the clum** behavior characteristic of highly cohesive feedstocks while maintaining high layer uniformity. △ Less

Submitted 9 September, 2022; originally announced September 2022.

Asymptotically consistent and computationally efficient modeling of short-ranged molecular interactions between curved slender fibers undergoing large 3D deformations

Authors: Maximilian J. Grill, Wolfgang A. Wall, Christoph Meier

Abstract: This article proposes a novel computational modeling approach for short-ranged molecular interactions between curved slender fibers undergoing large 3D deformations, and gives a detailed overview how it fits into the framework of existing fiber or beam interaction models, either considering microscale molecular or macroscale contact effects. The direct evaluation of a molecular interaction potenti… ▽ More This article proposes a novel computational modeling approach for short-ranged molecular interactions between curved slender fibers undergoing large 3D deformations, and gives a detailed overview how it fits into the framework of existing fiber or beam interaction models, either considering microscale molecular or macroscale contact effects. The direct evaluation of a molecular interaction potential between two general bodies in 3D space would require to integrate molecule densities over two 3D volumes, leading to a sixfold integral to be solved numerically. By exploiting the short-range nature of the considered class of interaction potentials as well as the fundamental kinematic assumption of undeformable fiber cross-sections, as typically applied in mechanical beam theories, a recently derived, closed-form analytical solution is applied for the interaction potential between a given section of the first fiber (slave beam) and the entire second fiber (master beam). This novel approach based on a pre-defined section-beam interaction potential (SBIP) requires only one single integration step along the slave beam length to be performed numerically. In terms of accuracy, the total beam-beam interaction potential resulting from this approach is shown to exhibit an asymptotically consistent angular and distance scaling behavior. In addition to elementary two-fiber systems, carefully chosen to verify accuracy and asymptotic consistence of the proposed SBIP approach, a potential practical application in form of adhesive nanofiber-grafted surfaces is studied. Involving a large number of helicoidal fibers undergoing large 3D deformations, arbitrary mutual fiber orientations as well as frequent local fiber pull-off and snap-into-contact events, this example demonstrates the robustness and computational efficiency of the new approach. △ Less

Submitted 18 August, 2022; v1 submitted 5 August, 2022; originally announced August 2022.

Analytical disk-cylinder interaction potential laws for the computational modeling of adhesive, deformable (nano)fibers

Authors: Maximilian J. Grill, Wolfgang A. Wall, Christoph Meier

Abstract: The analysis of complex fibrous systems or materials on the micro- and nanoscale, which have a high practical relevance for many technical or biological systems, requires accurate analytical descriptions of the adhesive and repulsive forces acting on the fiber surfaces. While such analytical expressions are generally needed both for theoretical studies and for computer-based simulations, the latte… ▽ More The analysis of complex fibrous systems or materials on the micro- and nanoscale, which have a high practical relevance for many technical or biological systems, requires accurate analytical descriptions of the adhesive and repulsive forces acting on the fiber surfaces. While such analytical expressions are generally needed both for theoretical studies and for computer-based simulations, the latter motivates us here to derive disk-cylinder interaction potential laws that are valid for arbitrary mutual orientations in the decisive regime of small surface separations. The chosen type of fundamental point-pair interaction follows the simple Lennard-Jones model with inverse power laws for both the adhesive van der Waals part and the steric, repulsive part. We present three different solutions, ranging from highest accuracy to the best trade-off between simplicity of the expression and sufficient accuracy for our intended use. The validity of simplifying approximations and the accuracy of the derived potential laws is thoroughly analyzed, using both numerical and analytical reference solutions for specific interaction cases. Most importantly, the correct asymptotic scaling behavior in the decisive regime of small separations is achieved, and also the theoretically predicted $(1\!/\!\sin\!α)$-angle dependence (for non-parallel cylinders) is obtained by the proposed analytical solutions. As we show in the outlook to our current research, the derived analytical disk-cylinder interaction potential laws may be used to formulate highly efficient computational models for the interaction of arbitrarily curved fibers, such that the disk represents the cross-section of the first and the cylinder a local approximation to the shape of the second fiber. △ Less

Submitted 18 August, 2022; v1 submitted 5 August, 2022; originally announced August 2022.

Bayesian calibration of coupled computational mechanics models under uncertainty based on interface deformation

Authors: Harald Willmann, Jonas Nitzler, Sebastian Brandstaeter, Wolfgang A. Wall

Abstract: Calibration or parameter identification is used with computational mechanics models related to observed data of the modeled process to find model parameters such that good similarity between model prediction and observation is achieved. We present a Bayesian calibration approach for surface coupled problems in computational mechanics based on measured deformation of an interface when no displaceme… ▽ More Calibration or parameter identification is used with computational mechanics models related to observed data of the modeled process to find model parameters such that good similarity between model prediction and observation is achieved. We present a Bayesian calibration approach for surface coupled problems in computational mechanics based on measured deformation of an interface when no displacement data of material points is available. The interpretation of such a calibration problem as a statistical inference problem, in contrast to deterministic model calibration, is computationally more robust and allows the analyst to find a posterior distribution over possible solutions rather than a single point estimate. The proposed framework also enables the consideration of unavoidable uncertainties that are present in every experiment and are expected to play an important role in the model calibration process. To mitigate the computational costs of expensive forward model evaluations, we propose to learn the log-likelihood function from a controllable amount of parallel simulation runs using Gaussian process regression. We introduce and specifically study the effect of three different discrepancy measures for deformed interfaces between reference data and simulation. We show that a statistically based discrepancy measure results in the most expressive posterior distribution. We further apply the approach to numerical examples in higher model parameter dimensions and interpret the resulting posterior under uncertainty. In the examples, we investigate coupled multi-physics models of fluid-structure interaction effects in biofilms and find that the model parameters affect the results in a coupled manner. △ Less

Submitted 10 June, 2022; originally announced June 2022.

Cauchy Slice Holography: A New AdS/CFT Dictionary

Authors: Goncalo Araujo-Regado, Rifath Khan, Aron C. Wall

Abstract: We investigate a new approach to holography in asymptotically AdS spacetimes, in which time rather than space is the emergent dimension. By making a sufficiently large T^2-deformation of a Euclidean CFT, we define a holographic theory that lives on Cauchy slices of the Lorentzian bulk. (More generally, for an arbitrary Hamiltonian constraint equation that closes, we show how to obtain it by an irr… ▽ More We investigate a new approach to holography in asymptotically AdS spacetimes, in which time rather than space is the emergent dimension. By making a sufficiently large T^2-deformation of a Euclidean CFT, we define a holographic theory that lives on Cauchy slices of the Lorentzian bulk. (More generally, for an arbitrary Hamiltonian constraint equation that closes, we show how to obtain it by an irrelevant deformation from a CFT with suitable anomalies.) The partition function of this theory defines a natural map between the bulk canonical quantum gravity theory Hilbert space, and the Hilbert space of the usual (undeformed) boundary CFT. We argue for the equivalence of the ADM and CFT Hamiltonians. We also explain how bulk unitarity emerges naturally, even though the boundary theory is not reflection-positive. This allows us to reformulate the holographic principle in the language of Wheeler-DeWitt canonical quantum gravity. Along the way, we outline a procedure for obtaining a bulk Hilbert space from the gravitational path integral with Dirichlet boundary conditions. Following previous conjectures, we postulate that this finite-cutoff gravitational path integral agrees with the T^2-deformed theory living on an arbitrary boundary manifold -- at least near the semiclassical regime. However, the T^2-deformed theory may be easier to UV complete, in which case it would be natural to take it as the definition of nonperturbative quantum gravity. △ Less

Submitted 26 December, 2022; v1 submitted 1 April, 2022; originally announced April 2022.

Comments: 63 pages, 13 figures, final version submitted to JHEP

A homogenized constrained mixture model of cardiac growth and remodeling: Analyzing mechanobiological stability and reversal

Authors: Amadeus M. Gebauer, Martin R. Pfaller, Fabian A. Braeu, Christian J. Cyron, Wolfgang A. Wall

Abstract: Cardiac growth and remodeling (G&R) patterns change ventricular size, shape, and function both globally and locally. Biomechanical, neurohormonal, and genetic stimuli drive these patterns through changes in myocyte dimension and fibrosis. We propose a novel microstructure-motivated model that predicts organ-scale G&R in the heart based on the homogenized constrained mixture theory. Previous models… ▽ More Cardiac growth and remodeling (G&R) patterns change ventricular size, shape, and function both globally and locally. Biomechanical, neurohormonal, and genetic stimuli drive these patterns through changes in myocyte dimension and fibrosis. We propose a novel microstructure-motivated model that predicts organ-scale G&R in the heart based on the homogenized constrained mixture theory. Previous models, based on the kinematic growth theory, reproduced consequences of G&R in bulk myocardial tissue by prescribing the direction and extent of growth but neglected underlying cellular mechanisms. In our model, the direction and extent of G&R emerge naturally from intra- and extra cellular turnover processes in myocardial tissue constituents and their preferred homeostatic stretch state. We additionally propose a method to obtain a mechanobiologically equilibrated reference configuration. We test our model on an idealized 3D left ventricular geometry and demonstrate that our model aims to maintain tensional homeostasis in hypertension conditions. In a stability map, we identify regions of stable and unstable G&R from an identical parameter set with varying systolic pressures and growth factors. Furthermore, we show the extent of G&R reversal after returning the systolic pressure to baseline following stage 1 and 2 hypertension. A realistic model of organ-scale cardiac G&R has the potential to identify patients at risk of heart failure, enable personalized cardiac therapies, and facilitate the optimal design of medical devices. △ Less

Submitted 3 May, 2023; v1 submitted 23 March, 2022; originally announced March 2022.

Global sensitivity analysis based on Gaussian-process metamodelling for complex biomechanical problems

Authors: Barbara Wirthl, Sebastian Brandstaeter, Jonas Nitzler, Bernhard A. Schrefler, Wolfgang A. Wall

Abstract: Biomechanical models often need to describe very complex systems, organs or diseases, and hence also include a large number of parameters. One of the attractive features of physics-based models is that in those models (most) parameters have a clear physical meaning. Nevertheless, the determination of these parameters is often very elaborate and costly and shows a large scatter within the populatio… ▽ More Biomechanical models often need to describe very complex systems, organs or diseases, and hence also include a large number of parameters. One of the attractive features of physics-based models is that in those models (most) parameters have a clear physical meaning. Nevertheless, the determination of these parameters is often very elaborate and costly and shows a large scatter within the population. Hence, it is essential to identify the most important parameter for a particular problem at hand. In order to distinguish parameters which have a significant influence on a specific model output from non-influential parameters, we use sensitivity analysis, in particular the Sobol method as a global variance-based method. However, the Sobol method requires a large number of model evaluations, which is prohibitive for computationally expensive models. We therefore employ Gaussian processes as a metamodel for the underlying full model. Metamodelling introduces further uncertainty, which we also quantify. We demonstrate the approach by applying it to two different problems: nanoparticle-mediated drug delivery in a multiphase tumour-growth model, and arterial growth and remodelling. Even relatively small numbers of evaluations of the full model suffice to identify the influential parameters in both cases and to separate them from non-influential parameters. The approach also allows the quantification of higher-order interaction effects. We thus show that a variance-based global sensitivity analysis is feasible for computationally expensive biomechanical models. Different aspects of sensitivity analysis are covered including a transparent declaration of the uncertainties involved in the estimation process. Such a global sensitivity analysis not only helps to massively reduce costs for experimental determination of parameters but is also highly beneficial for inverse analysis of such complex models. △ Less

Submitted 21 June, 2022; v1 submitted 3 February, 2022; originally announced February 2022.

Journal ref: Int J Numer Meth Biomed Engng. 2023;e3675

A Versatile SPH Modeling Framework for Coupled Microfluid-Powder Dynamics in Additive Manufacturing: Binder Jetting, Material Jetting, Directed Energy Deposition and Powder Bed Fusion

Authors: Sebastian L. Fuchs, Patrick M. Praegla, Christian J. Cyron, Wolfgang A. Wall, Christoph Meier

Abstract: Many additive manufacturing (AM) technologies rely on powder feedstock, which is fused to form the final part either by melting or by chemical binding with subsequent sintering. In both cases, process stability and resulting part quality depend on dynamic interactions between powder particles and a fluid phase, i.e., molten metal or liquid binder. The present work proposes a versatile computationa… ▽ More Many additive manufacturing (AM) technologies rely on powder feedstock, which is fused to form the final part either by melting or by chemical binding with subsequent sintering. In both cases, process stability and resulting part quality depend on dynamic interactions between powder particles and a fluid phase, i.e., molten metal or liquid binder. The present work proposes a versatile computational modeling framework for simulating such coupled microfluid-powder dynamics problems involving thermo-capillary flow and reversible phase transitions. In particular, a liquid and a gas phase are interacting with a solid phase that consists of a substrate and mobile powder particles while simultaneously considering temperature-dependent surface tension and wetting effects. In case of laser-metal interactions, the effect of rapid evaporation is incorporated through additional mechanical and thermal interface fluxes. All phase domains are spatially discretized using smoothed particle hydrodynamics. The method's Lagrangian nature is beneficial in the context of dynamically changing interface topologies. Special care is taken in the formulation of phase transitions, which is crucial for the robustness of the computational scheme. While the underlying model equations are of a very general nature, the proposed framework is especially suitable for the mesoscale modeling of various AM processes. To this end, the generality and robustness of the computational modeling framework is demonstrated by several application-motivated examples representing the specific AM processes binder jetting, material jetting, directed energy deposition, and powder bed fusion. Among others, it is shown how the dynamic impact of droplets in binder jetting or the evaporation-induced recoil pressure in powder bed fusion leads to powder motion, distortion of the powder packing structure, and powder particle ejection. △ Less

Submitted 22 January, 2022; v1 submitted 5 January, 2022; originally announced January 2022.

A Mortar Finite Element Formulation for Large Deformation Lubricated Contact Problems with Smooth Transition Between Mixed, Elasto-Hydrodynamic and Full Hydrodynamic Lubrication

Authors: Mostafa Faraji, Alexander Seitz, Christoph Meier, Wolfgang A. Wall

Abstract: This work proposes a novel model and numerical formulation for lubricated contact problems describing the mutual interaction between two deformable 3D solid bodies and an interposed fluid film. The solid bodies are consistently described based on nonlinear continuum mechanics allowing for finite deformations and arbitrary constitutive laws. The fluid film is modelled as a quasi-2D flow problem on… ▽ More This work proposes a novel model and numerical formulation for lubricated contact problems describing the mutual interaction between two deformable 3D solid bodies and an interposed fluid film. The solid bodies are consistently described based on nonlinear continuum mechanics allowing for finite deformations and arbitrary constitutive laws. The fluid film is modelled as a quasi-2D flow problem on the interface between the solids governed by the averaged Reynolds equation. The averaged Reynolds equation accounts for surface roughness utilizing spatially homogenized, effective fluid parameters and for cavitation through a positivity constraint imposed on the pressure field. In contrast to existing approaches, the proposed model accounts for the co-existence of frictional contact tractions and hydrodynamic fluid tractions at every local point on the contact surface of the interacting bodies and covers the entire range from boundary lubrication to mixed, elastohydrodynamic, and eventually to full film hydrodynamic lubrication in one unified modelling framework with smooth transition between these different regimes. Critically, the model relies on a recently proposed regularization scheme for the mechanical contact constraint combining the advantages of classical penalty and Lagrange multiplier approaches by expressing the mechanical contact pressure as a function of the effective gap between the solid bodies while at the same time limiting the minimal gap value occurring at the (theoretical) limit of infinitely high contact pressures. From a physical point of view, this approach can be considered as a model for the elastic deformation of surface asperities, with a bounded magnitude depending on the interacting solids' surface roughness. A consistent and accurate model behavior is demonstrated and validated by employing several challenging and practically relevant benchmark test cases. △ Less

Submitted 4 January, 2022; originally announced January 2022.

Comments: 31 pages, 15 figures

Inverse analysis of material parameters in coupled multi-physics biofilm models

Authors: Harald Willmann, Wolfgang A. Wall

Abstract: In this article we propose an inverse analysis algorithm to find the best fit of multiple material parameters in different coupled multi-physics biofilm models. We use a nonlinear continuum mechanical approach to model biofilm deformation that occurs in flow cell experiments. The objective function is based on a simple geometrical measurement of the distance of the fluid biofilm interface between… ▽ More In this article we propose an inverse analysis algorithm to find the best fit of multiple material parameters in different coupled multi-physics biofilm models. We use a nonlinear continuum mechanical approach to model biofilm deformation that occurs in flow cell experiments. The objective function is based on a simple geometrical measurement of the distance of the fluid biofilm interface between model and experiments. A Levenberg-Marquardt algorithm based on finite difference approximation is used as an optimizer. The proposed method uses a moderate to low amount of model evaluations. For a first presentation and evaluation the algorithm is applied and tested on different numerical examples based on generated numerical results and the addition of Gaussian noise. Achieved numerical results show that the proposed method serves well for different physical effects investigated and numerical approaches chosen for the model. Presented examples show the inverse analysis for multiple parameters in biofilm models including fluid-solid interaction effects, poroelasticity, heterogeneous material properties and growth. △ Less

Submitted 14 October, 2021; originally announced October 2021.

A simple yet consistent constitutive law and mortar-based layer coupling schemes for thermomechanical macroscale simulations of metal additive manufacturing processes

Authors: Sebastian D. Proell, Wolfgang A. Wall, Christoph Meier

Abstract: This article proposes a coupled thermomechanical finite element model tailored to the macroscale simulation of metal additive manufacturing processes such as selective laser melting. A first focus lies on the derivation of a consistent constitutive law on basis of a Voigt-type spatial homogenization procedure across the relevant phases, powder, melt and solid. The proposed constitutive law account… ▽ More This article proposes a coupled thermomechanical finite element model tailored to the macroscale simulation of metal additive manufacturing processes such as selective laser melting. A first focus lies on the derivation of a consistent constitutive law on basis of a Voigt-type spatial homogenization procedure across the relevant phases, powder, melt and solid. The proposed constitutive law accounts for the irreversibility of phase change and consistently represents thermally induced residual stresses. In particular, the incorporation of a reference strain term, formulated in rate form, allows to consistently enforce a stress-free configuration for newly solidifying material at melt temperature. Application to elementary test cases demonstrates the validity of the proposed constitutive law and allows for a comparison with analytical and reference solutions. Moreover, these elementary solidification scenarios give detailed insights and foster understanding of basic mechanisms of residual stress generation in melting and solidification problems with localized, moving heat sources. As a second methodological aspect, dual mortar mesh tying strategies are proposed for the coupling of successively applied powder layers. This approach allows for very flexible mesh generation for complex geometries. As compared to collocation-type coupling schemes, e.g., based on hanging nodes, these mortar methods enforce the coupling conditions between non-matching meshes in an $L^2$-optimal manner. The combination of the proposed constitutive law and mortar mesh tying approach is validated on realistic three-dimensional examples, representing a first step towards part-scale predictions. △ Less

Submitted 6 September, 2021; v1 submitted 23 July, 2021; originally announced July 2021.

Generalized Section-Section Interaction Potentials in the Geometrically Exact Beam Theory: Modeling of Intermolecular Forces, Asymptotic Limit as Strain-Energy Function, and Formulation of Rotational Constraints

Authors: Christoph Meier, Maximilian J. Grill, Wolfgang A. Wall

Abstract: The present contribution proposes a universal framework to formulate generalized section-section interaction potentials (SSIP) within the geometrically exact beam theory. By exploiting the fundamental kinematic assumption of undeformable cross-sections, an objective (i.e., frame-invariant) description of SSIPs via a minimal set of six (translational and rotational) relative coordinates, either in… ▽ More The present contribution proposes a universal framework to formulate generalized section-section interaction potentials (SSIP) within the geometrically exact beam theory. By exploiting the fundamental kinematic assumption of undeformable cross-sections, an objective (i.e., frame-invariant) description of SSIPs via a minimal set of six (translational and rotational) relative coordinates, either in spatial or in material form, is proposed. Based on work-pairing, work-conjugated section-section interaction forces and moments, either in spatial or in material form, are identified that can be consistently derived from a variational principle. Interestingly, it is shown that hyperelastic stored-energy functions relating the deformation measures and stress-resultants of the well-known geometrically exact Simo-Reissner beam theory can also be identified as SSIPs when considering the asymptotic limit of small relative distances and rotations between the interacting cross-sections. Moreover, the proposed variational problem formulation is demonstrated to be of a very general nature, thus allowing for the formulation of translational and rotational constraints between arbitrarily oriented cross-sections based on either a penalty or a Lagrange multiplier potential. Possible applications include fiber-based structures and materials in technical and biological systems, where the proposed approach allows to model short- or long-ranged inter-molecular (e.g., electrostatic, van der Waals or repulsive steric) interactions between fibers in geometrically complex arrangements and to formulate translational and rotational coupling constraints between different fibers (e.g., cross-linked polymer chains) or between fibers and a matrix phase (e.g., fiber-reinforced composites). △ Less

Submitted 17 August, 2022; v1 submitted 20 May, 2021; originally announced May 2021.

BigEarthNet-MM: A Large Scale Multi-Modal Multi-Label Benchmark Archive for Remote Sensing Image Classification and Retrieval

Authors: Gencer Sumbul, Arne de Wall, Tristan Kreuziger, Filipe Marcelino, Hugo Costa, Pedro Benevides, Mário Caetano, Begüm Demir, Volker Markl

Abstract: This paper presents the multi-modal BigEarthNet (BigEarthNet-MM) benchmark archive made up of 590,326 pairs of Sentinel-1 and Sentinel-2 image patches to support the deep learning (DL) studies in multi-modal multi-label remote sensing (RS) image retrieval and classification. Each pair of patches in BigEarthNet-MM is annotated with multi-labels provided by the CORINE Land Cover (CLC) map of 2018 ba… ▽ More This paper presents the multi-modal BigEarthNet (BigEarthNet-MM) benchmark archive made up of 590,326 pairs of Sentinel-1 and Sentinel-2 image patches to support the deep learning (DL) studies in multi-modal multi-label remote sensing (RS) image retrieval and classification. Each pair of patches in BigEarthNet-MM is annotated with multi-labels provided by the CORINE Land Cover (CLC) map of 2018 based on its thematically most detailed Level-3 class nomenclature. Our initial research demonstrates that some CLC classes are challenging to be accurately described by only considering (single-date) BigEarthNet-MM images. In this paper, we also introduce an alternative class-nomenclature as an evolution of the original CLC labels to address this problem. This is achieved by interpreting and arranging the CLC Level-3 nomenclature based on the properties of BigEarthNet-MM images in a new nomenclature of 19 classes. In our experiments, we show the potential of BigEarthNet-MM for multi-modal multi-label image retrieval and classification problems by considering several state-of-the-art DL models. We also demonstrate that the DL models trained from scratch on BigEarthNet-MM outperform those pre-trained on ImageNet, especially in relation to some complex classes, including agriculture and other vegetated and natural environments. We make all the data and the DL models publicly available at https://bigearth.net, offering an important resource to support studies on multi-modal image scene classification and retrieval problems in RS. △ Less

Submitted 17 June, 2021; v1 submitted 17 May, 2021; originally announced May 2021.

Comments: Accepted at the IEEE Geoscience and Remote Sensing Magazine. Our code is available online at https://git.tu-berlin.de/rsim/BigEarthNet-MM_19-classes_models. arXiv admin note: substantial text overlap with arXiv:2001.06372

What do cells regulate in soft tissues on short time scales?

Authors: Jonas F. Eichinger, Daniel Paukner, Roland C. Aydin, Wolfgang A. Wall, Jay D. Humphrey, Christian J. Cyron

Abstract: Cells within living soft biological tissues seem to promote the maintenance of a mechanical state within a defined range near a so-called set-point. This mechanobiological process is often referred to as mechanical homeostasis. During this process, cells intimately interact with the fibers of the surrounding extracellular matrix (ECM). It remains poorly understood, however, what individual cells a… ▽ More Cells within living soft biological tissues seem to promote the maintenance of a mechanical state within a defined range near a so-called set-point. This mechanobiological process is often referred to as mechanical homeostasis. During this process, cells intimately interact with the fibers of the surrounding extracellular matrix (ECM). It remains poorly understood, however, what individual cells actually regulate during these interactions, and how these micromechanical regulations are translated to tissue level to lead to what we macroscopically call mechanical homeostasis. Herein, we examine this question by a combination of experiments, theoretical analysis and computational modeling. We demonstrate that on short time scales (hours) - during which deposition and degradation of ECM fibers can largely be neglected - cells appear to regulate neither the stress / strain in the ECM nor their own shape, but rather only the contractile forces that they exert on the surrounding ECM. △ Less

Submitted 9 April, 2021; originally announced April 2021.

Violation of Unitarity in Gravitational Subregions

Authors: Aron C. Wall

Abstract: This essay contends that in quantum gravity, some spatial regions do not admit a unitary Hilbert space. Because the gravitational path integral spontaneously breaks CPT symmetry, "states" with negative probability can be identified on either side of trapped surfaces. I argue that these negative norm states are tolerable, by analogy to quantum mechanics. This viewpoint suggests a resolution of the… ▽ More This essay contends that in quantum gravity, some spatial regions do not admit a unitary Hilbert space. Because the gravitational path integral spontaneously breaks CPT symmetry, "states" with negative probability can be identified on either side of trapped surfaces. I argue that these negative norm states are tolerable, by analogy to quantum mechanics. This viewpoint suggests a resolution of the firewall paradox, similar to black hole complementarity. Implications for cosmology are briefly discussed. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Comments: 8 pages, 3 figs. Submitted to the Gravity Research Foundation 2021 Essay Competition

Journal ref: Int. J. Mod. Phys. D 30, 2142014 (2021)

Physics-Based Modeling and Predictive Simulation of Powder Bed Fusion Additive Manufacturing Across Length Scales

Authors: Christoph Meier, Sebastian L. Fuchs, Nils Much, Jonas Nitzler, Ryan W. Penny, Patrick M. Praegla, Sebastian D. Pröll, Yushen Sun, Reimar Weissbach, Magdalena Schreter, Neil E. Hodge, A. John Hart, Wolfgang A. Wall

Abstract: Powder bed fusion additive manufacturing (PBFAM) of metals has the potential to enable new paradigms of product design, manufacturing and supply chains while accelerating the realization of new technologies in the medical, aerospace, and other industries. Currently, wider adoption of PBFAM is held back by difficulty in part qualification, high production costs and low production rates, as extensiv… ▽ More Powder bed fusion additive manufacturing (PBFAM) of metals has the potential to enable new paradigms of product design, manufacturing and supply chains while accelerating the realization of new technologies in the medical, aerospace, and other industries. Currently, wider adoption of PBFAM is held back by difficulty in part qualification, high production costs and low production rates, as extensive process tuning, post-processing, and inspection are required before a final part can be produced and deployed. Physics-based modeling and predictive simulation of PBFAM offers the potential to advance fundamental understanding of physical mechanisms that initiate process instabilities and cause defects. In turn, these insights can help link process and feedstock parameters with resulting part and material properties, thereby predicting optimal processing conditions and inspiring the development of improved processing hardware, strategies and materials. This work presents recent developments of our research team in the modeling of metal PBFAM processes spanning length scales, namely mesoscale powder modeling, mesoscale melt pool modeling, macroscale thermo-solid-mechanical modeling and microstructure modeling. Ongoing work in experimental validation of these models is also summarized. In conclusion, we discuss the interplay of these individual submodels within an integrated overall modeling approach, along with future research directions. △ Less

Submitted 29 July, 2021; v1 submitted 31 March, 2021; originally announced March 2021.

Spatial Map** of Powder Layer Density for Metal Additive Manufacturing via X-ray Microscopy

Authors: Ryan W. Penny, Patrick M. Praegla, Marvin Ochsenius, Daniel Oropeza, Christoph Meier, Wolfgang A. Wall, A. John Hart

Abstract: Uniform powder spreading is a requisite for creating consistent, high-quality components via powder bed additive manufacturing (AM), wherein layer density and uniformity are complex functions of powder characteristics, spreading kinematics, and mechanical boundary conditions. High spatial variation in particle packing density, driven by the stochastic nature of the spreading process, impedes optic… ▽ More Uniform powder spreading is a requisite for creating consistent, high-quality components via powder bed additive manufacturing (AM), wherein layer density and uniformity are complex functions of powder characteristics, spreading kinematics, and mechanical boundary conditions. High spatial variation in particle packing density, driven by the stochastic nature of the spreading process, impedes optical interrogation of these layer attributes. Thus, we present transmission X-ray imaging as a method for directly map** the effective depth of powder layers at process-relevant scale and resolution. Specifically, we study layers of nominal 50-250 micrometer thickness, created by spreading a selection of commercially obtained Ti-6Al-4V, 316 SS, and Al-10Si-Mg powders into precision-depth templates. We find that powder layer packing fraction may be predicted from a combination of the relative thickness of the layer as compared to mean particle size, and flowability assessed by macroscale powder angle of repose. Power spectral density analysis is introduced as a tool for quantification of defect severity as a function of morphology, and enables separate consideration of layer uniformity and sparsity. Finally, spreading is studied using multi-layer templates, providing insight into how particles interact with both previously deposited material and abrupt changes in boundary condition. Experimental results are additionally compared to a purpose-built discrete element method (DEM) powder spreading simulation framework, clarifying the competing role of adhesive and gravitational forces in layer uniformity and density, as well as particle motion within the powder bed during spreading. △ Less

Submitted 24 March, 2021; originally announced March 2021.

A computational framework for modeling cell-matrix interactions in soft biological tissues

Authors: Jonas F. Eichinger, Maximilian J. Grill, Iman Davoodi Kermani, Roland C. Aydin, Wolfgang A. Wall, Jay D. Humphrey, Christian J. Cyron

Abstract: Living soft tissues appear to promote the development and maintenance of a preferred mechanical state within a defined tolerance around a so-called set-point. This phenomenon is often referred to as mechanical homeostasis. In contradiction to the prominent role of mechanical homeostasis in various (patho)physiological processes, its underlying micromechanical mechanisms acting on the level of indi… ▽ More Living soft tissues appear to promote the development and maintenance of a preferred mechanical state within a defined tolerance around a so-called set-point. This phenomenon is often referred to as mechanical homeostasis. In contradiction to the prominent role of mechanical homeostasis in various (patho)physiological processes, its underlying micromechanical mechanisms acting on the level of individual cells and fibers remain poorly understood, especially, how these mechanisms on the microscale lead to what we macroscopically call mechanical homeostasis. Here, we present a novel finite element based computational framework that is constructed bottom up, that is, it models key mechanobiological mechanisms such as actin cytoskeleton contraction and molecular clutch behavior of individual cells interacting with a reconstructed three-dimensional extracellular fiber matrix. The framework reproduces many experimental observations regarding mechanical homeostasis on short time scales (hours), in which the deposition and degradation of extracellular matrix can largely be neglected. This model can serve as a systematic tool for future in silico studies of the origin of the numerous still unexplained experimental observations about mechanical homeostasis. △ Less

Submitted 24 March, 2021; originally announced March 2021.

An SPH framework for fluid-solid and contact interaction problems including thermo-mechanical coupling and reversible phase transitions

Authors: Sebastian L. Fuchs, Christoph Meier, Wolfgang A. Wall, Christian J. Cyron

Abstract: The present work proposes an approach for fluid-solid and contact interaction problems including thermo-mechanical coupling and reversible phase transitions. The solid field is assumed to consist of several arbitrarily-shaped, undeformable but mobile rigid bodies, that are evolved in time individually and allowed to get into mechanical contact with each other. The fluid field generally consists of… ▽ More The present work proposes an approach for fluid-solid and contact interaction problems including thermo-mechanical coupling and reversible phase transitions. The solid field is assumed to consist of several arbitrarily-shaped, undeformable but mobile rigid bodies, that are evolved in time individually and allowed to get into mechanical contact with each other. The fluid field generally consists of multiple liquid or gas phases. All fields are spatially discretized using the method of smoothed particle hydrodynamics (SPH). This approach is especially suitable in the context of continually changing interface topologies and dynamic phase transitions without the need for additional methodological and computational effort for interface tracking as compared to mesh- or grid-based methods. Proposing a concept for the parallelization of the computational framework, in particular concerning a computationally efficient evaluation of rigid body motion, is an essential part of this work. Finally, the accuracy and robustness of the proposed framework is demonstrated by several numerical examples in two and three dimensions, involving multiple rigid bodies, two-phase flow, and reversible phase transitions, with a focus on two potential application scenarios in the fields of engineering and biomechanics: powder bed fusion additive manufacturing (PBFAM) and disintegration of food boluses in the human stomach. The efficiency of the parallel computational framework is demonstrated by a strong scaling analysis. △ Less

Submitted 14 March, 2021; originally announced March 2021.

Validation and parameter optimization of a hybrid embedded/homogenized solid tumor perfusion model

Authors: Johannes Kremheller, Sebastian Brandstaeter, Bernhard A. Schrefler, Wolfgang A. Wall

Abstract: The goal of this paper is to investigate the validity of a hybrid embedded/homogenized in-silico approach for modeling perfusion through solid tumors. The rationale behind this novel idea is that only the larger blood vessels have to be explicitly resolved while the smaller scales of the vasculature are homogenized. As opposed to typical discrete or fully-resolved 1D-3D models, the required data c… ▽ More The goal of this paper is to investigate the validity of a hybrid embedded/homogenized in-silico approach for modeling perfusion through solid tumors. The rationale behind this novel idea is that only the larger blood vessels have to be explicitly resolved while the smaller scales of the vasculature are homogenized. As opposed to typical discrete or fully-resolved 1D-3D models, the required data can be obtained with in-vivo imaging techniques since the morphology of the smaller vessels is not necessary. By contrast, the larger vessels, whose topology and structure is attainable non-invasively, are resolved and embedded as one-dimensional inclusions into the three-dimensional tissue domain which is modeled as a porous medium. A sound mortar-type formulation is employed to couple the two representations of the vasculature. We validate the hybrid model and optimize its parameters by comparing its results to a corresponding fully-resolved model based on several well-defined metrics. These tests are performed on a complex data set of three different tumor types with heterogeneous vascular architectures. The correspondence of the hybrid model in terms of mean representative elementary volume blood and interstitial fluid pressures is excellent with relative errors of less than 4%. Larger, but less important and explicable errors are present in terms of blood flow in the smaller, homogenized vessels. We finally discuss and demonstrate how the hybrid model can be further improved to apply it for studies on tumor perfusion and the efficacy of drug delivery. △ Less

Submitted 14 July, 2021; v1 submitted 17 February, 2021; originally announced February 2021.

A Novel Modeling and Simulation Approach for the Hindered Mobility of Charged Particles in Biological Hydrogels

Authors: Maximilian J. Grill, Jonas F. Eichinger, Jonas Koban, Christoph Meier, Oliver Lieleg, Wolfgang A. Wall

Abstract: This article presents a novel computational model to study the selective filtering of biological hydrogels due to the surface charge and size of diffusing particles. It is the first model that includes the random 3D fiber orientation and connectivity of the biopolymer network and that accounts for elastic deformations of the fibers by means of beam theory. As a key component of the model, novel fo… ▽ More This article presents a novel computational model to study the selective filtering of biological hydrogels due to the surface charge and size of diffusing particles. It is the first model that includes the random 3D fiber orientation and connectivity of the biopolymer network and that accounts for elastic deformations of the fibers by means of beam theory. As a key component of the model, novel formulations are proposed both for the electrostatic and repulsive steric interactions between a spherical particle and a beam. In addition to providing a thorough validation of the model, the presented computational studies yield new insights into the underlying mechanisms of hindered particle mobility, especially regarding the influence of the aforementioned aspects that are unique to this model. It is found that the precise distribution of fiber and thus charge agglomerations in the network have a crucial influence on the mobility of oppositely charged particles and gives rise to distinct motion patterns. Considering the high practical significance for instance with respect to targeted drug release or infection defense, the provided proof of concept motivates further advances of the model toward a truly predictive computational tool that allows a case- and patient-specific assessment for real (biological) systems. △ Less

Submitted 17 January, 2021; originally announced January 2021.

A Novel Physics-Based and Data-Supported Microstructure Model for Part-Scale Simulation of Laser Powder Bed Fusion of Ti-6Al-4V

Authors: Jonas Nitzler, Christoph Meier, Kei W. Müller, Wolfgang A. Wall, Neil E. Hodge

Abstract: The elasto-plastic material behavior, material strength and failure modes of metals fabricated by additive manufacturing technologies are significantly determined by the underlying process-specific microstructure evolution. In this work a novel physics-based and data-supported phenomenological microstructure model for Ti-6Al-4V is proposed that is suitable for the part-scale simulation of selectiv… ▽ More The elasto-plastic material behavior, material strength and failure modes of metals fabricated by additive manufacturing technologies are significantly determined by the underlying process-specific microstructure evolution. In this work a novel physics-based and data-supported phenomenological microstructure model for Ti-6Al-4V is proposed that is suitable for the part-scale simulation of selective laser melting processes. The model predicts spatially homogenized phase fractions of the most relevant microstructural species, namely the stable $β$-phase, the stable $α_{\text{s}}$-phase as well as the metastable Martensite $α_{\text{m}}$-phase, in a physically consistent manner. In particular, the modeled microstructure evolution, in form of diffusion-based and non-diffusional transformations, is a pure consequence of energy and mobility competitions among the different species, without the need for heuristic transformation criteria as often applied in existing models. The mathematically consistent formulation of the evolution equations in rate form renders the model suitable for the practically relevant scenario of temperature- or time-dependent diffusion coefficients, arbitrary temperature profiles, and multiple coexisting phases. Due to its physically motivated foundation, the proposed model requires only a minimal number of free parameters, which are determined in an inverse identification process considering a broad experimental data basis in form of time-temperature transformation diagrams. Subsequently, the predictive ability of the model is demonstrated by means of continuous cooling transformation diagrams, showing that experimentally observed characteristics such as critical cooling rates emerge naturally from the proposed microstructure model, instead of being enforced as heuristic transformation criteria. △ Less

Submitted 29 June, 2021; v1 submitted 14 January, 2021; originally announced January 2021.

Comments: 32 pages, 14 figures

A novel smoothed particle hydrodynamics formulation for thermo-capillary phase change problems with focus on metal additive manufacturing melt pool modeling

Authors: Christoph Meier, Sebastian L. Fuchs, A. John Hart, Wolfgang A. Wall

Abstract: Laser-based metal processing including welding and three dimensional printing, involves localized melting of solid or granular raw material, surface tension-driven melt flow and significant evaporation of melt due to the applied very high energy densities. The present work proposes a weakly compressible smoothed particle hydrodynamics formulation for thermo-capillary phase change problems involvin… ▽ More Laser-based metal processing including welding and three dimensional printing, involves localized melting of solid or granular raw material, surface tension-driven melt flow and significant evaporation of melt due to the applied very high energy densities. The present work proposes a weakly compressible smoothed particle hydrodynamics formulation for thermo-capillary phase change problems involving solid, liquid and gaseous phases with special focus on selective laser melting, an emerging metal additive manufacturing technique. Evaporation-induced recoil pressure, temperature-dependent surface tension and wetting forces are considered as mechanical interface fluxes, while a Gaussian laser beam heat source and evaporation-induced heat losses are considered as thermal interface fluxes. A novel interface stabilization scheme is proposed, which is shown to allow for a stable and smooth liquid-gas interface by effectively dam** spurious interface flows as typically occurring in continuum surface force approaches. Moreover, discretization strategies for the tangential projection of the temperature gradient, as required for the discrete Marangoni forces, are critically reviewed. The proposed formulation is deemed especially suitable for modeling of the melt pool dynamics in metal additive manufacturing because the full range of relevant interface forces is considered and the explicit resolution of the atmospheric gas phase enables a consistent description of pore formation by gas inclusion. The accuracy and robustness of the individual model and method building blocks is verified by means of several selected examples in the context of the selective laser melting process. △ Less

Submitted 19 April, 2021; v1 submitted 16 December, 2020; originally announced December 2020.

Disordered biopolymer filament bundles: Topological defects and kinks

Authors: Valentin M. Slepukhin, Maximilian J. Grill, Qingda Hu, Elliot L. Botvinick, Wolfgang A. Wall, Alex J. Levine

Abstract: Bundles of stiff filaments are ubiquitous in the living world, found both in the cytoskeleton and in the extracellular medium. These bundles are typically held together by smaller cross-linking molecules. We demonstrate analytically, numerically and experimentally that such bundles can be kinked, i.e., have localized regions of high curvature that are long-lived metastable states. We propose three… ▽ More Bundles of stiff filaments are ubiquitous in the living world, found both in the cytoskeleton and in the extracellular medium. These bundles are typically held together by smaller cross-linking molecules. We demonstrate analytically, numerically and experimentally that such bundles can be kinked, i.e., have localized regions of high curvature that are long-lived metastable states. We propose three possible mechanisms of kink stabilization: a difference in trapped length of the filament segments between two cross links; a dislocation where the endpoint of a filament occurs within the bundle, and the braiding of the filaments in the bundle. At a high concentration of cross links, the last two effects lead to the topologically protected kinked states. Finally, we explore numerically and analytically the transition of the metastable kinked state to the stable straight bundle. △ Less

Submitted 23 November, 2020; originally announced November 2020.

Comments: 9 pages, 6 figures

A novel smoothed particle hydrodynamics and finite element coupling scheme for fluid-structure interaction: the sliding boundary particle approach

Authors: Sebastian L. Fuchs, Christoph Meier, Wolfgang A. Wall, Christian J. Cyron

Abstract: A novel numerical formulation for solving fluid-structure interaction (FSI) problems is proposed where the fluid field is spatially discretized using smoothed particle hydrodynamics (SPH) and the structural field using the finite element method (FEM). As compared to fully mesh- or grid-based FSI frameworks, due to the Lagrangian nature of SPH this framework can be easily extended to account for mo… ▽ More A novel numerical formulation for solving fluid-structure interaction (FSI) problems is proposed where the fluid field is spatially discretized using smoothed particle hydrodynamics (SPH) and the structural field using the finite element method (FEM). As compared to fully mesh- or grid-based FSI frameworks, due to the Lagrangian nature of SPH this framework can be easily extended to account for more complex fluids consisting of multiple phases and dynamic phase transitions. Moreover, this approach facilitates the handling of large deformations of the fluid domain respectively the fluid-structure interface without additional methodological and computational efforts. In particular, to achieve an accurate representation of interaction forces between fluid particles and structural elements also for strongly curved interface geometries, the novel sliding boundary particle approach is proposed to ensure full support of SPH particles close to the interface. The coupling of the fluid and the structural field is based on a Dirichlet-Neumann partitioned approach, where the fluid field is the Dirichlet partition with prescribed interface displacements and the structural field is the Neumann partition subject to interface forces. To overcome instabilities inherent to weakly coupled schemes an iterative fixed-point coupling scheme is employed. Several numerical examples in form of well-known benchmark tests are considered to validate the accuracy, stability, and robustness of the proposed formulation. Finally, the filling process of a highly flexible thin-walled balloon-like container is studied, representing a model problem close to potential application scenarios of the proposed scheme in the field of biomechanics. △ Less

Submitted 18 May, 2021; v1 submitted 19 October, 2020; originally announced October 2020.