-
Chondrule survivability in the solar nebula
Authors:
Tetsuo Taki,
Shigeru Wakita
Abstract:
The lifetime of mm size dust grains, such as chondrules, in the nominal solar nebula model is limited to $\sim 10^{5}$ yr due to an inward drift driven by gas drag. However, isotopic and petrological studies on primitive meteorites indicate a discrepancy of $\gtrsim 10^{6}$ yr between the formation time of chondrules and that of chondritic parent bodies. Therefore chondrules should survive for…
▽ More
The lifetime of mm size dust grains, such as chondrules, in the nominal solar nebula model is limited to $\sim 10^{5}$ yr due to an inward drift driven by gas drag. However, isotopic and petrological studies on primitive meteorites indicate a discrepancy of $\gtrsim 10^{6}$ yr between the formation time of chondrules and that of chondritic parent bodies. Therefore chondrules should survive for $\gtrsim 10^{6}$ yr in the solar nebula against the inward drift without subsequent growth (i.e., planetesimal formation). Here we investigate the conditions of the solar nebula that are suitable for the long lifetime of chondrule-sized dust particles. We take the turbulent strength, the radial pressure gradient force, and the disk metallicity of the solar nebula as free parameters. For 1 mm-radius-chondrules to survive and keep their size for $\gtrsim 10^{6}$ yr, the suitable condition is a weak turbulence ($α\sim 10^{-6}$), a flat radial profile ($η\lesssim 10^{-3}$), and a high metallicity ($Z\sim 0.1$). This condition is qualitatively consistent with the characteristics of protoplanetary disks suggested by recent observations. We eventually propose that planetesimal formation may be induced by the disk evolution, e.g., the inside-out dispersal of the gas component due to the disk wind.
△ Less
Submitted 4 January, 2024;
originally announced January 2024.
-
Survivability of Amorphous Ice in Comets Depends on the Latent Heat of Crystallization of Impure Water Ice
Authors:
Sota Arakawa,
Shigeru Wakita
Abstract:
Comets would have amorphous ice rather than crystalline one at the epoch of their accretion. Cometary ice contains some impurities that govern the latent heat of ice crystallization, $L_{\rm cry}$. However, it is still controversial whether the crystallization process is exothermic or endothermic. In this study, we perform one-dimensional simulations of the thermal evolution of km-sized comets and…
▽ More
Comets would have amorphous ice rather than crystalline one at the epoch of their accretion. Cometary ice contains some impurities that govern the latent heat of ice crystallization, $L_{\rm cry}$. However, it is still controversial whether the crystallization process is exothermic or endothermic. In this study, we perform one-dimensional simulations of the thermal evolution of km-sized comets and investigate the effect of the latent heat. We find that the depth where amorphous ice can survive significantly depends on the latent heat of ice crystallization. Assuming the cometary radius of 2 km, the depth of the amorphous ice mantle is approximately 100 m when the latent heat is positive (i.e., the exothermic case with $L_{\rm cry} = + 9 \times 10^{4}$ J/kg). In contrast, when we consider the impure ice representing the endothermic case with $L_{\rm cry} = - 9 \times 10^{4}$ J/kg, the depth of the amorphous ice mantle could exceed 1 km. Although our numerical results indicate that these depths depend on the size and the accretion age of comets, the depth in a comet with the negative latent heat is a few to several times larger than the positive case for a given comet size. This work suggests that the spatial distribution of the ice crystallinity in a comet nucleus depends on the latent heat, which can be different from the previous estimates assuming pure water ice.
△ Less
Submitted 30 December, 2023;
originally announced January 2024.
-
Modeling the formation of Selk impact crater on Titan: Implications for Dragonfly
Authors:
Shigeru Wakita,
Brandon C. Johnson,
Jason M. Soderblom,
Jahnavi Shah,
Catherine D. Neish,
Jordan K. Steckloff
Abstract:
Selk crater is an $\sim$ 80 km diameter impact crater on the Saturnian icy satellite, Titan. Melt pools associated with impact craters like Selk provide environments where liquid water and organics can mix and produce biomolecules like amino acids. It is partly for this reason that the Selk region has been selected as the area that NASA's Dragonfly mission will explore and address one of its prima…
▽ More
Selk crater is an $\sim$ 80 km diameter impact crater on the Saturnian icy satellite, Titan. Melt pools associated with impact craters like Selk provide environments where liquid water and organics can mix and produce biomolecules like amino acids. It is partly for this reason that the Selk region has been selected as the area that NASA's Dragonfly mission will explore and address one of its primary goals: to search for biological signatures on Titan. Here we simulate Selk-sized impact craters on Titan to better understand the formation of Selk and its melt pool. We consider several structures for the icy target material by changing the thickness of the methane clathrate layer, which has a substantial effect on the target thermal structure and crater formation. Our numerical results show that a 4 km-diameter-impactor produces a Selk-sized crater when 5-15 km thick methane clathrate layers are considered. We confirm the production of melt pools in these cases and find that the melt volumes are similar regardless of methane clathrate layer thickness. The distribution of the melted material, however, is sensitive to the thickness of the methane clathrate layer. The melt pool appears as a torus-like shape with a few km depth in the case of 10-15 km thick methane clathrate layer, and as a shallower layer in the case of a 5 km thick clathrate layer. Melt pools of this thickness may take tens of thousands of years to freeze, allowing more time for complex organics to form.
△ Less
Submitted 22 February, 2023;
originally announced February 2023.
-
Effect of impact velocity and angle on deformational heating and post-impact temperature
Authors:
Shigeru Wakita,
Hidenori Genda,
Kosuke Kurosawa,
Thomas M. Davison,
Brandon C. Johnson
Abstract:
The record of impact induced shock-heating in meteorites is an important key for understanding the collisional history of the solar system. Material strength is important for impact heating, but the effect of impact angle and impact velocity on shear heating remains poorly understood. Here, we report three-dimensional oblique impact simulations, which confirm the enhanced heating due to material s…
▽ More
The record of impact induced shock-heating in meteorites is an important key for understanding the collisional history of the solar system. Material strength is important for impact heating, but the effect of impact angle and impact velocity on shear heating remains poorly understood. Here, we report three-dimensional oblique impact simulations, which confirm the enhanced heating due to material strength and explore the effects of impact angle and impact velocity. We find that oblique impacts with an impact angle that is steeper than 45 degree produce a similar amount of heated mass as vertical impacts. On the other hand, grazing impacts produce less heated mass and smaller heated regions compared to impacts at steeper angles. We derive an empirical formula of the heated mass, as a function of the impact angle and velocity. This formula can be used to estimate the impact conditions (velocity and angle) that had occurred and caused Ar loss in the meteoritic parent bodies. Furthermore, our results indicate that grazing impacts at higher impact velocities could generate a similar amount of heated material as vertical impacts at lower velocities. As the heated material produced by grazing impacts has experienced lower pressure than the material heated by vertical impacts, our results imply that grazing impacts may produce weakly shock-heated meteorites.
△ Less
Submitted 16 August, 2022;
originally announced August 2022.
-
Methane-saturated layers limit the observability of impact craters on Titan
Authors:
Shigeru Wakita,
Brandon C. Johnson,
Jason M. Soderblom,
Jahnavi Shah,
Catherine D. Neish
Abstract:
As the only icy satellite with a thick atmosphere and liquids on its surface, Titan represents a unique end-member to study the impact cratering process. Unlike craters on other Saturnian satellites, Titan's craters are preferentially located in high-elevation regions near the equator. This led to the hypothesis that the presence of liquid methane in Titan's lowlands affects crater morphology, mak…
▽ More
As the only icy satellite with a thick atmosphere and liquids on its surface, Titan represents a unique end-member to study the impact cratering process. Unlike craters on other Saturnian satellites, Titan's craters are preferentially located in high-elevation regions near the equator. This led to the hypothesis that the presence of liquid methane in Titan's lowlands affects crater morphology, making them difficult to identify. This is because surfaces covered by weak fluid-saturated sediment limit the topographic expression of impact craters, as sediment moves into the crater cavity shortly after formation. Here we simulate crater-forming impacts on Titan's surface, exploring how a methane-saturated layer overlying a methane-clathrate layer affects crater formation. Our numerical results show that impacts form smaller craters in a methane-clathrate basement than a water-ice basement, due to the differences in strength. We find that the addition of a methane-saturated layer atop this basement reduces crater depths and influences crater morphology. The morphology of impact craters formed in a thin methane-saturated layer are similar to those in a "dry" target, but a thick saturated layer produces an impact structure with little to no topography. A thick methane-saturated layer (thicker than 40% of the impactor diameter) could explain the dearth of craters in the low-elevation regions on Titan.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Jetting during oblique impacts of spherical impactors
Authors:
Shigeru Wakita,
Brandon Johnson,
C. Adeene Denton,
Thomas M. Davison
Abstract:
During the early stages of an impact a small amount material may be jetted and ejected at speeds exceeding the impact velocity. Jetting is an important process for producing melt during relatively low velocity impacts. How impact angle affects the jetting process has yet to be fully understood. Here, we simulate jetting during oblique impacts using the iSALE shock physics code. Assuming both the t…
▽ More
During the early stages of an impact a small amount material may be jetted and ejected at speeds exceeding the impact velocity. Jetting is an important process for producing melt during relatively low velocity impacts. How impact angle affects the jetting process has yet to be fully understood. Here, we simulate jetting during oblique impacts using the iSALE shock physics code. Assuming both the target and impactor have the same composition (dunite), we examine the jetted material which exceeds the impact velocity. Our results show that oblique impacts always produce more jetted ejecta than vertical impacts, except for grazing impacts with impact angles $< 15^{\circ}$. A 45$^{\circ}$ impact with an impact velocity of 3 km/s produces jetted material equal to $\sim$ 7 \% of the impactor mass. This is 6 times the jetted mass produced by a vertical impact with similar impact conditions. We also find that the origin of jetted ejecta depends on impact angle; for impact angles less than 45$^{\circ}$, most of the jet is composed of impactor material, while at higher impact angles the jet is dominated by target material. Our findings are consistent with previous experimental work. In all cases, jetted materials are preferentially distributed downrange of the impactor.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Enhancement of impact heating in pressure-strengthened rocks in oblique impacts
Authors:
Shigeru Wakita,
Hidenori Genda,
Kosuke Kurosawa,
Thomas M Davison
Abstract:
Shock-induced metamorphism in meteorites informs us about the collisional environment and history of our solar system. Recently the importance of material strength in impact heating was reported from head-on impact simulations. Here, we perform three-dimensional oblique impact simulations, and confirm the additional heating due to material strength for oblique impacts. Despite a large difference i…
▽ More
Shock-induced metamorphism in meteorites informs us about the collisional environment and history of our solar system. Recently the importance of material strength in impact heating was reported from head-on impact simulations. Here, we perform three-dimensional oblique impact simulations, and confirm the additional heating due to material strength for oblique impacts. Despite a large difference in the peak pressure at the impact point at a given impact velocity, we find that the heated mass for an oblique impact is nearly the same as that for a head-on impact. Thus, our results differ from the previous finding that the heated mass decreases as the impact becomes more oblique, and show that the additional shear heating is more effective for oblique impacts than for head-on impacts. This also indicates that material ejected during oblique impact tends to experience lower shock pressures but higher temperatures.
△ Less
Submitted 1 December, 2019;
originally announced December 2019.
-
Aggregate Growth and Internal structures of Chondrite Parent Bodies Forming from Dense Clumps
Authors:
Yuji Matsumoto,
Shigeru Wakita,
Yasuhiro Hasegawa,
Shoichi Oshino
Abstract:
Major components of chondrites are chondrules and matrix. Measurements of the volatile abundance in Semarkona chondrules suggest that chondrules formed in a dense clump that had a higher solid density than the gas density in the solar nebula. We investigate collisions between chondrules and matrix in the surface region of dense clumps using fluffy aggregate growth models. Our simulations show that…
▽ More
Major components of chondrites are chondrules and matrix. Measurements of the volatile abundance in Semarkona chondrules suggest that chondrules formed in a dense clump that had a higher solid density than the gas density in the solar nebula. We investigate collisions between chondrules and matrix in the surface region of dense clumps using fluffy aggregate growth models. Our simulations show that the collisional growth of aggregates composed of chondrules and matrix takes place in the clumps well before they experience gravitational collapse. The internal structure of chondrite parent bodies (CPBs) can be thereby determined by aggregate growth. We find that the aggregate growth generates two scales within CPBs. The first scale is involved with the small scale distribution of chondrules and determined by the early growth stage, where chondrules accrete aggregates composed of matrix grains. This accretion can reproduce the thickness of the matrix layer around chondrules found in chondrites. The other scale is related to the large scale distribution of chondrules. Its properties (e.g., the abundance of chondrules and the overall size) depend on the gas motion within the clump, which is parameterized in this work. Our work thus suggests that the internal structure of CPBs may provide important clues about their formation conditions and mechanisms.
△ Less
Submitted 24 November, 2019;
originally announced November 2019.
-
The Properties of Planetesimal Collisions under Jupiter's Perturbation and the Application to Chondrule Formation via Impact Jetting
Authors:
Shoichi Oshino,
Yasuhiro Hasegawa,
Shigeru Wakita,
Yuji Matsumoto
Abstract:
Understanding chondrule formation provides invaluable clues about the origin of the solar system. Recent studies suggest that planetesimal collisions and the resulting impact melts are promising for forming chondrules. Given that the dynamics of planetesimals is a key in impact-based chondrule formation scenarios, we here perform direct $N$-body simulations to examine how the presence of Jupiter a…
▽ More
Understanding chondrule formation provides invaluable clues about the origin of the solar system. Recent studies suggest that planetesimal collisions and the resulting impact melts are promising for forming chondrules. Given that the dynamics of planetesimals is a key in impact-based chondrule formation scenarios, we here perform direct $N$-body simulations to examine how the presence of Jupiter affects the properties of chondrule-forming collisions. Our results show that the absence/presence of Jupiter considerably changes the properties of high velocity collisions whose impact velocities are higher than 2.5 km s$^{-1}$; high velocity collisions occur due to impacts between protoplanets and planetesimals for the case without Jupiter; for the case with Jupiter, eccentricities of planetesimals are pumped up by the secular and resonant perturbations from Jupiter. We also categorize the resulting planetesimal collisions and find that most of high velocity collisions are classified as grazing ones for both cases. To examine the effect of Jupiter on chondrule formation directly, we adopt the impact jetting scenario and compute the resulting abundance of chondrules. Our results show that for the case without Jupiter, chondrule formation proceeds in the inside-out manner, following the growth of protoplanets. If Jupiter is present, the location and timing of chondrule formation are determined by Jupiter's eccentricity, which is treated as a free parameter in our simulations. Thus, the existence of Jupiter is the key parameter for specifying when and where chondrule formation occurs for impact-based scenarios.
△ Less
Submitted 9 September, 2019; v1 submitted 9 September, 2019;
originally announced September 2019.
-
Fates of hydrous materials during planetesimal collisions
Authors:
Shigeru Wakita,
Hidenori Genda
Abstract:
Hydrous minerals are found on the surfaces of asteroids, but their origin is not clear. If their origin is endogenic, the hydrous minerals that were formed in the inner part of a planetesimal (or parent body) should come out on to the surface without dehydration. If their origin is exogenic, the source of hydrous minerals accreting onto asteroids is needed. Collisions in the asteroid belt would be…
▽ More
Hydrous minerals are found on the surfaces of asteroids, but their origin is not clear. If their origin is endogenic, the hydrous minerals that were formed in the inner part of a planetesimal (or parent body) should come out on to the surface without dehydration. If their origin is exogenic, the source of hydrous minerals accreting onto asteroids is needed. Collisions in the asteroid belt would be related to both origins because collisions excavate the surface and eject the materials. However, the fate of hydrous minerals in large planetesimals during the collisional process has not been well investigated. Here, we explore planetesimal collisions by using the iSALE-2D code, and investigate the effect of an impact for the target planetesimal containing hydrous minerals. Our numerical results for the fiducial case (5 km/s of the impact velocity) show that hydrous minerals are slightly heated during the collisions. This moderate heating indicates that they can avoid the dehydration reaction and keep their original composition. Some hydrous minerals have larger velocity than the escape velocity of the collision system. This means that hydrous minerals can escape from the planetesimal and support the theory of exogenic origin for the hydrous minerals on asteroids. Meanwhile, the velocity of other hydrous minerals is smaller than the escape velocity of the system. This also indicates the possibility of an endogenic origin for the hydrous minerals on asteroids. Our results suggest that hydrous minerals on asteroids can be provided by planetesimal collisions.
△ Less
Submitted 11 March, 2019;
originally announced March 2019.
-
Interplay of Inhomogeneous Electrochemical Reactions with Mechanical Responses in Silicon-Graphite Anode and its Impacts on Degradation
Authors:
Junhyuk Moon,
Shinya Wakita,
Heechul Jung,
Sungnim Cho,
Jaegu Yoon,
Joowook Lee,
Sihyung Lee,
Kimihiko Ito,
Yoshimi Kubo,
Heung Chan Lee,
Young-Gyoon Ryu
Abstract:
Enhanced EV market penetration requires durability of the battery with high energy throughput. For long-term cycle stability of silicon-graphite anode capable of high energy density, the reversible redox reactions are crucial. Here, we unveil intriguing electrochemical phenomena such as crosstalk of lithium ion ($Li^{+}$) between silicon and graphite, $Li^{+}$ accumulation in silicon, and capacity…
▽ More
Enhanced EV market penetration requires durability of the battery with high energy throughput. For long-term cycle stability of silicon-graphite anode capable of high energy density, the reversible redox reactions are crucial. Here, we unveil intriguing electrochemical phenomena such as crosstalk of lithium ion ($Li^{+}$) between silicon and graphite, $Li^{+}$ accumulation in silicon, and capacity depression of graphite under high pressure, which engender the irreversible redox reactions. Active material properties, i.e. the size of silicon and the hardness of graphite, silicon-graphite anode, are modified based on the unveiled results to enhance the reaction homogeneity and reduce subsequent degradation. Owing to the property change of the anode active materials, silicon-graphite anode paired with high nickel cathode allows the prismatic cell with 8.7 Ah to reach cycling performance over 750 cycles with volumetric energy density of 665 $Whl^{-1}$, which is corresponding to 800 $Whl^{-1}$ in the prismatic cell with 87 Ah. Finally, the cycling performance can be tailored by the design of electrode regulating $Li^{+}$ crosstalk. Our findings provide electrochemical insights into degradation mechanisms and a promising direction on the progressive improvement of materials and the design of electrodes in silicon-graphite anode.
△ Less
Submitted 10 June, 2019; v1 submitted 5 January, 2019;
originally announced January 2019.
-
Abundances of ordinary chondrites in thermally evolving planetesimals
Authors:
S. Wakita,
Y. Hasegawa,
T. Nozawa
Abstract:
Chondrites are one of the most primitive objects in the solar system, and keep the record of the degree of thermal metamorphism experienced in their parent bodies. This thermal history can be classified by the petrologic type. We investigate the thermal evolution of planetesimals to account for the current abundances (known as the fall statistics) of petrologic types 3 - 6 ordinary chondrites. We…
▽ More
Chondrites are one of the most primitive objects in the solar system, and keep the record of the degree of thermal metamorphism experienced in their parent bodies. This thermal history can be classified by the petrologic type. We investigate the thermal evolution of planetesimals to account for the current abundances (known as the fall statistics) of petrologic types 3 - 6 ordinary chondrites. We carry out a number of numerical calculations in which formation times and sizes of planetesimals are taken as parameters. We find that planetesimals that form within 2.0 Myr after the formation of Ca-Al-rich inclusions (CAIs) can contain all petrologic types of ordinary chondrites. Our results also indicate that plausible scenarios of planetesimal formation, which are consistent with the fall statistics, are that planetesimals with radii larger than 60 km start to form around 2.0 Myr after CAIs and/or that ones with radii less than 50 km should be formed within 1.5 Myr after CAIs. Thus, thermal modelling of planetesimals is important for revealing the occurrence and amount of metamorphosed chondrites, and for providing invaluable insights into planetesimal formation.
△ Less
Submitted 28 June, 2018;
originally announced June 2018.
-
Strategy to Nonlinearly Deplete Irreversible Li Consumption in Si-rich Li-Ion Batteries
Authors:
K. Ogata,
K. Takei,
S. Saito,
S. Wakita,
M. Koh,
SG. Doo,
S. Han,
S. Jeon
Abstract:
Despite recent significant developments of Si composites, use of silicon with significance in the anodes for Li-ion batteries is still limited. In fact, nominal energy density is to be saturated around ~750 Wh/L regardless of cell-types under the current material strategies. Use of Si-rich anode can push the limit; however, the prolonged irreversible Li consumption becomes more prominent. We previ…
▽ More
Despite recent significant developments of Si composites, use of silicon with significance in the anodes for Li-ion batteries is still limited. In fact, nominal energy density is to be saturated around ~750 Wh/L regardless of cell-types under the current material strategies. Use of Si-rich anode can push the limit; however, the prolonged irreversible Li consumption becomes more prominent. We previously showed that repeating c-Li3.75(+δ)Si formation/decomposition, typically recognized to degrade the anodes, can improve the irreversibility and accumulatively minimize the gross consumption. Utilizing the insights combined with prelithiation techniques, here we provide prototypic cell designs that can nonlinearly deplete the consumption.
△ Less
Submitted 27 December, 2017;
originally announced December 2017.
-
Chondrule Accretion with a Growing Protoplanet
Authors:
Yuji Matsumoto,
Shoichi Oshino,
Yasuhiro Hasegawa,
Shigeru Wakita
Abstract:
Chondrules are primitive materials in the Solar System. They are formed in the first about 3 Myr of the Solar System's history. This timescale is longer than that of Mars formation, and it is conceivable that protoplanets, planetesimals and chondrules might have existed simultaneously in the solar nebula. Due to protoplanets perturbation on the planetesimal dynamics and chondrule accretion on them…
▽ More
Chondrules are primitive materials in the Solar System. They are formed in the first about 3 Myr of the Solar System's history. This timescale is longer than that of Mars formation, and it is conceivable that protoplanets, planetesimals and chondrules might have existed simultaneously in the solar nebula. Due to protoplanets perturbation on the planetesimal dynamics and chondrule accretion on them, all the formed chondrules are unlikely to be accreted by planetesimals. We investigate the amount of chondrules accreted by planetesimals in such a condition. We assume that a protoplanet is in oligarchic growth, and we perform analytical calculations of chondrule accretion both by a protoplanet and by planetesimals. Through the oligarchic growth stage, planetesimals accrete about half of the formed chondrules. The smallest planetesimals get the largest amount of the chondrules, compared with the amount accreted by more massive planetesimals. We perform a parameter study and find that this fraction is not largely changed for a wide range of parameter sets.
△ Less
Submitted 25 February, 2017;
originally announced February 2017.
-
Diffusion of Oxygen Isotopes in Thermally Evolving Planetesimals and Size Ranges of Presolar Silicate Grains
Authors:
S. Wakita,
T. Nozawa,
Y. Hasegawa
Abstract:
Presolar grains are small particles found in meteorites through their isotopic compositions which are considerably different from those of materials in the Solar System. If some isotopes in presolar grains diffused out beyond their grain sizes when they were embedded in parent bodies of meteorites, their isotopic compositions could be washed out, and hence the grains cannot be identified as presol…
▽ More
Presolar grains are small particles found in meteorites through their isotopic compositions which are considerably different from those of materials in the Solar System. If some isotopes in presolar grains diffused out beyond their grain sizes when they were embedded in parent bodies of meteorites, their isotopic compositions could be washed out, and hence the grains cannot be identified as presolar grains any more. We explore this possibility for the first time by self-consistently simulating the thermal evolution of planetesimals and the diffusion length of $^{18}$O in presolar silicate grains. Our results show that presolar silicate grains smaller than $\sim$ 0.03 $μm$ cannot keep their original isotopic compositions even if the host planetesimals experienced maximum temperature as low as 600 $^{\circ}$C. Since this temperature corresponds to the one experienced by petrologic type 3 chondrites, the isotopic diffusion can constrain the size of presolar silicate grains discovered in such chondrites to be larger than $\sim$ 0.03 $μm$. We also find that the diffusion lengths of $^{18}$O reach $\sim$ 0.3-2 $μm$ in planetesimals that were heated up to 700-800 $^{\circ}$C. This indicates that, if the original size of presolar grains spans a range from $\sim$ 0.001 $μm$ to $\sim$ 0.3 $μm$ like that in the interstellar medium, the isotopic records of the presolar grains may be almost completely lost in such highly thermalized parent bodies. We propose that isotopic diffusion could be a key process to control the size distribution and abundance of presolar grains in some types of chondrites.
△ Less
Submitted 23 January, 2017;
originally announced January 2017.
-
Planetesimal collisions as a chondrule forming event
Authors:
Shigeru Wakita,
Yuji Matsumoto,
Shoichi Oshino,
Yasuhiro Hasegawa
Abstract:
Chondritic meteorites contain unique spherical materials named chondrules: sub-mm sized silicate grains once melted in a high temperature condition in the solar nebula. We numerically explore one of chondrule forming processes, planetesimal collisions. Previous studies found that impact jetting via protoplanet-planetesimal collisions make chondrules with an amount of 1 % of impactors' mass, when i…
▽ More
Chondritic meteorites contain unique spherical materials named chondrules: sub-mm sized silicate grains once melted in a high temperature condition in the solar nebula. We numerically explore one of chondrule forming processes, planetesimal collisions. Previous studies found that impact jetting via protoplanet-planetesimal collisions make chondrules with an amount of 1 % of impactors' mass, when impact velocity exceeds 2.5 km s$^{-1}$. Based on the mineralogical data of chondrules, undifferentiated planetesimals would be more suitable for chondrule-forming collisions than potentially differentiated protoplanets. We examine planetesimal-planetesimal collisions using a shock physics code and find two things: one is that planetesimal-planetesimal collisions produce the nearly same amount of chondrules as protoplanet-planetesimal collisions ($\sim$ 1 %). The other is that the amount of produced chondrules becomes larger as the impact velocity increases when two planetesimals collide with each other. We also find that progenitors of chondrules can be ejected from deeper regions of large targets (planetesimals or protoplanets) than small impactors (planetesimals). The composition of targets is therefore important to fully account for the mineralogical data of currently sampled chondrules.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
-
Forming Chondrites in a Solar Nebula with Magnetically Induced Turbulence
Authors:
Yasuhiro Hasegawa,
Neal J. Turner,
Joseph Masiero,
Shigeru Wakita,
Yuji Matsumoto,
Shoichi Oshino
Abstract:
Chondritic meteorites provide valuable opportunities to investigate the origins of the solar system. We explore impact jetting as a mechanism of chondrule formation and subsequent pebble accretion as a mechanism of accreting chondrules onto parent bodies of chondrites, and investigate how these two processes can account for the currently available meteoritic data. We find that when the solar nebul…
▽ More
Chondritic meteorites provide valuable opportunities to investigate the origins of the solar system. We explore impact jetting as a mechanism of chondrule formation and subsequent pebble accretion as a mechanism of accreting chondrules onto parent bodies of chondrites, and investigate how these two processes can account for the currently available meteoritic data. We find that when the solar nebula is $\le 5$ times more massive than the minimum-mass solar nebula at $a \simeq 2-3$ AU and parent bodies of chondrites are $\le 10^{24}$ g ($\le$ 500 km in radius) in the solar nebula, impact jetting and subsequent pebble accretion can reproduce a number of properties of the meteoritic data. The properties include the present asteroid belt mass, the formation timescale of chondrules, and the magnetic field strength of the nebula derived from chondrules in Semarkona. Since this scenario requires a first generation of planetesimals that trigger impact jetting and serve as parent bodies to accrete chondrules, the upper limit of parent bodies' masses leads to the following implications: primordial asteroids that were originally $\ge 10^{24}$ g in mass were unlikely to contain chondrules, while less massive primordial asteroids likely had a chondrule-rich surface layer. The scenario developed from impact jetting and pebble accretion can therefore provide new insights into the origins of the solar system.
△ Less
Submitted 11 March, 2016; v1 submitted 29 February, 2016;
originally announced March 2016.
-
Chondrule Formation via Impact Jetting Triggered by Planetary Accretion
Authors:
Yasuhiro Hasegawa,
Shigeru Wakita,
Yuji Matsumoto,
Shoichi Oshino
Abstract:
Chondrules are one of the most primitive elements that can serve as a fundamental clue as to the origin of our Solar system. We investigate a formation scenario of chondrules that involves planetesimal collisions and the resultant impact jetting. Planetesimal collisions are the main agent to regulate planetary accretion that corresponds to the formation of terrestrial planets and cores of gas gian…
▽ More
Chondrules are one of the most primitive elements that can serve as a fundamental clue as to the origin of our Solar system. We investigate a formation scenario of chondrules that involves planetesimal collisions and the resultant impact jetting. Planetesimal collisions are the main agent to regulate planetary accretion that corresponds to the formation of terrestrial planets and cores of gas giants. The key component of this scenario is that ejected materials can melt when the impact velocity between colliding planetesimals exceeds about 2.5 km s$^{-1}$. The previous simulations show that the process is efficient enough to reproduce the primordial abundance of chondrules. We examine this scenario carefully by performing semi-analytical calculations that are developed based on the results of direct $N$-body simulations. As found by the previous work, we confirm that planetesimal collisions that occur during planetary accretion can play an important role in forming chondrules. This arises because protoplanet-planetesimal collisions can achieve the impact velocity of about 2.5 km s$^{-1}$ or higher, as protoplanets approach the isolation mass ($M_{p,iso}$). Assuming that the ejected mass is a fraction ($F_{ch}$) of colliding planetesimals' mass, we show that the resultant abundance of chondrules is formulated well by $F_{ch}M_{p,iso}$, as long as the formation of protoplanets is completed within a given disk lifetime. We perform a parameter study and examine how the abundance of chondrules and their formation timing change. We find that the impact jetting scenario generally works reasonably well for a certain range of parameters, while more dedicated work would be needed to include other physical processes that are neglected in this work and to examine their effects on chondrule formation.
△ Less
Submitted 10 November, 2015;
originally announced November 2015.
-
Probing the Physical Conditions of Supernova Ejecta with the Measured Sizes of Presolar Al2O3 Grains
Authors:
Takaya Nozawa,
Shigeru Wakita,
Yasuhiro Hasegawa,
Takashi Kozasa
Abstract:
A few particles of presolar Al2O3 grains with sizes above 0.5 mum are believed to have been produced in the ejecta of core-collapse supernovae (SNe). In order to clarify the formation condition of such large Al2O3 grains, we investigate the condensation of Al2O3 grains for wide ranges of the gas density and cooling rate. We first show that the average radius and condensation efficiency of newly fo…
▽ More
A few particles of presolar Al2O3 grains with sizes above 0.5 mum are believed to have been produced in the ejecta of core-collapse supernovae (SNe). In order to clarify the formation condition of such large Al2O3 grains, we investigate the condensation of Al2O3 grains for wide ranges of the gas density and cooling rate. We first show that the average radius and condensation efficiency of newly formed Al2O3 grains are successfully described by a non-dimensional quantity "Lambda_on" defined as the ratio of the timescale with which the supersaturation ratio increases to the collision timescale of reactant gas species at dust formation. Then, we find that the formation of submicron-sized Al2O3 grains requires at least ten times higher gas densities than those presented by one-dimensional SN models. This indicates that presolar Al2O3 grains identified as a SN origin might be formed in dense gas clumps, allowing us to propose that the measured sizes of presolar grains can be a powerful tool to constrain the physical conditions in which they formed. We also briefly discuss the survival of newly formed Al2O3 grains against the destruction in the shocked gas within the SN remnants.
△ Less
Submitted 7 September, 2015;
originally announced September 2015.
-
Thermal and Impact History of the H Chondrite Parent Asteroid during Metamorphism: Constraints from Metallic Fe-Ni
Authors:
Edward R. D. Scott,
Tatiana V. Krot,
Joseph I. Goldstein,
Shigeru Wakita
Abstract:
We have studied cloudy taenite, metallographic cooling rates, and shock effects in 30 H3-6 chondrites to elucidate the thermal and early impact history of the H chondrite parent body. We focused on H chondrites with Ar-Ar ages greater than 4.4 Gyr and unshocked and mildly shocked H chondrites, as strongly shocked chondrites with such old ages are very rare. Cooling rates for most H chondrites at 5…
▽ More
We have studied cloudy taenite, metallographic cooling rates, and shock effects in 30 H3-6 chondrites to elucidate the thermal and early impact history of the H chondrite parent body. We focused on H chondrites with Ar-Ar ages greater than 4.4 Gyr and unshocked and mildly shocked H chondrites, as strongly shocked chondrites with such old ages are very rare. Cooling rates for most H chondrites at 500 C are 10-50 C/Myr and do not decrease systematically with increasing petrologic type as predicted by the onion-shell model in which types 3 to 5 are arranged in concentric layers around a type 6 core. Some type 4 chondrites cooled slower than some type 6 chondrites and type 3 chondrites did not cool faster than other types, contrary to the onion-shell model. Cloudy taenite particle sizes, which range from 40 to 120 nm, are inversely correlated with metallographic cooling rates and show that the latter were not compromised by shock heating. The three H4 chondrites that were used to develop the onion-shell model, Ste. Marguerite, Beaver Creek, and Forest Vale, cooled through 500 C at ~5000 C/Myr. Our thermal modeling shows that these rates are 50 times higher than could be achieved in a body that was heated by 26Al and cooled without disturbance by impact. Published Ar-Ar ages do not decrease systematically with increasing petrologic type but do correlate inversely with cloudy taenite particle size suggesting that impact mixing decreased during metamorphism. Metal and silicate compositions in regolith breccias show that impacts mixed material after metamorphism without causing significant heating. Impacts during metamorphism created Portales Valley and two other H6 chondrites with large metallic veins, excavated the fast-cooled H4 chondrites around 3-4 Myr after accretion, and mixed petrologic types.
△ Less
Submitted 1 April, 2014;
originally announced April 2014.