-
Thermal and electrostatic tuning of surface phonon-polaritons in LaAlO3/SrTiO3 heterostructures
Authors:
Yixi Zhou,
Adrien Waelchli,
Margherita Boselli,
Iris Crassee,
Adrien Bercher,
Weiwei Luo,
Jiahua Duan,
J. L. M. van Mechelen,
Dirk van der Marel,
Jérémie Teyssier,
Carl Willem Rischau,
Lukas Korosec,
Stefano Gariglio,
Jean-Marc Triscone,
Alexey B. Kuzmenko
Abstract:
Phonon polaritons are promising for infrared applications due to a strong light-matter coupling and subwavelength energy confinement they offer. Yet, the spectral narrowness of the phonon bands and difficulty to tune the phonon polariton properties hinder further progress in this field. SrTiO3 - a prototype perovskite oxide - has recently attracted attention due to two prominent far-infrared phono…
▽ More
Phonon polaritons are promising for infrared applications due to a strong light-matter coupling and subwavelength energy confinement they offer. Yet, the spectral narrowness of the phonon bands and difficulty to tune the phonon polariton properties hinder further progress in this field. SrTiO3 - a prototype perovskite oxide - has recently attracted attention due to two prominent far-infrared phonon polaritons bands, albeit without any tuning reported so far. Here we show, using cryogenic infrared near-field microscopy, that long-propagating surface phonon polaritons are present both in bare SrTiO3 and in LaAlO3/SrTiO3 heterostructures hosting a two-dimensional electron gas. The presence of the two-dimensional electron gas increases dramatically the thermal variation of the upper limit of the surface phonon polariton band due to temperature dependent polaronic screening of the surface charge carriers. Furthermore, we demonstrate a tunability of the upper surface phonon polariton frequency in LaAlO3/SrTiO3 via electrostatic gating. Our results suggest that oxide interfaces are a new platform bridging unconventional electronics and long-wavelength nanophotonics.
△ Less
Submitted 13 November, 2023;
originally announced December 2023.
-
Optical Flow Dataset Synthesis from Unpaired Images
Authors:
Adrian Wälchli,
Paolo Favaro
Abstract:
The estimation of optical flow is an ambiguous task due to the lack of correspondence at occlusions, shadows, reflections, lack of texture and changes in illumination over time. Thus, unsupervised methods face major challenges as they need to tune complex cost functions with several terms designed to handle each of these sources of ambiguity. In contrast, supervised methods avoid these challenges…
▽ More
The estimation of optical flow is an ambiguous task due to the lack of correspondence at occlusions, shadows, reflections, lack of texture and changes in illumination over time. Thus, unsupervised methods face major challenges as they need to tune complex cost functions with several terms designed to handle each of these sources of ambiguity. In contrast, supervised methods avoid these challenges altogether by relying on explicit ground truth optical flow obtained directly from synthetic or real data. In the case of synthetic data, the ground truth provides an exact and explicit description of what optical flow to assign to a given scene. However, the domain gap between synthetic data and real data often limits the ability of a trained network to generalize. In the case of real data, the ground truth is obtained through multiple sensors and additional data processing, which might introduce persistent errors and contaminate it. As a solution to these issues, we introduce a novel method to build a training set of pseudo-real images that can be used to train optical flow in a supervised manner. Our dataset uses two unpaired frames from real data and creates pairs of frames by simulating random warps, occlusions with super-pixels, shadows and illumination changes, and associates them to their corresponding exact optical flow. We thus obtain the benefit of directly training on real data while having access to an exact ground truth. Training with our datasets on the Sintel and KITTI benchmarks is straightforward and yields models on par or with state of the art performance compared to much more sophisticated training approaches.
△ Less
Submitted 2 April, 2021;
originally announced April 2021.
-
Sampling Optimized Code for Type Feedback
Authors:
Olivier Flückiger,
Andreas Wälchli,
Sebastián Krynski,
Jan Vitek
Abstract:
To efficiently execute dynamically typed languages, many language implementations have adopted a two-tier architecture. The first tier aims for low-latency startup times and collects dynamic profiles, such as the dynamic types of variables. The second tier provides high-throughput using an optimizing compiler that specializes code to the recorded type information. If the program behavior changes t…
▽ More
To efficiently execute dynamically typed languages, many language implementations have adopted a two-tier architecture. The first tier aims for low-latency startup times and collects dynamic profiles, such as the dynamic types of variables. The second tier provides high-throughput using an optimizing compiler that specializes code to the recorded type information. If the program behavior changes to the point that not previously seen types occur in specialized code, that specialized code becomes invalid, it is deoptimized, and control is transferred back to the first tier execution engine which will start specializing anew. However, if the program behavior becomes more specific, for instance, if a polymorphic variable becomes monomorphic, nothing changes. Once the program is running optimized code, there are no means to notice that an opportunity for optimization has been missed.
We propose to employ a sampling-based profiler to monitor native code without any instrumentation. The absence of instrumentation means that when the profiler is not active, no overhead is incurred. We present an implementation is in the context of the Ř just-in-time, optimizing compiler for the R language. Based on the sampled profiles, we are able to detect when the native code produced by Ř is specialized for stale type feedback and recompile it to more type-specific code. We show that sampling adds an overhead of less than 3% in most cases and up to 9% in few cases and that it reliably detects stale type feedback within milliseconds.
△ Less
Submitted 5 October, 2020;
originally announced October 2020.
-
Electronic transport in sub-micrometric channels at the LaAlO$_{3}$/SrTiO$_{3}$ interface
Authors:
Margherita Boselli,
Gernot Scheerer,
Michele Filippone,
Weiwei Luo,
Adrien Waelchli,
Alexey B. Kuzmenko,
Stefano Gariglio,
Thierry Giamarchi,
Jean-Marc Triscone
Abstract:
Nanoscale channels realized at the conducting interface between LaAlO$_{3}$ and SrTiO$_{3}$ provide a perfect playground to explore the effect of dimensionality on the electronic properties of complex oxides. Here we compare the electric transport properties of devices realized using the AFM-writing technique and conventional photo-lithography. We find that the lateral size of the conducting paths…
▽ More
Nanoscale channels realized at the conducting interface between LaAlO$_{3}$ and SrTiO$_{3}$ provide a perfect playground to explore the effect of dimensionality on the electronic properties of complex oxides. Here we compare the electric transport properties of devices realized using the AFM-writing technique and conventional photo-lithography. We find that the lateral size of the conducting paths has a strong effect on their transport behavior at low temperature. We observe a crossover from metallic to insulating regime occurring at about 50 K for channels narrower than 100 nm. The insulating upturn can be suppressed by the application of a positive backgate. We compare the behavior of nanometric constrictions in lithographically patterned channels with the result of model calculations and we conclude that the experimental observations are compatible with the physics of a quantum point contact.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
Learning to Take Directions One Step at a Time
Authors:
Qiyang Hu,
Adrian Wälchli,
Tiziano Portenier,
Matthias Zwicker,
Paolo Favaro
Abstract:
We present a method to generate a video sequence given a single image. Because items in an image can be animated in arbitrarily many different ways, we introduce as control signal a sequence of motion strokes. Such control signal can be automatically transferred from other videos, e.g., via bounding box tracking. Each motion stroke provides the direction to the moving object in the input image and…
▽ More
We present a method to generate a video sequence given a single image. Because items in an image can be animated in arbitrarily many different ways, we introduce as control signal a sequence of motion strokes. Such control signal can be automatically transferred from other videos, e.g., via bounding box tracking. Each motion stroke provides the direction to the moving object in the input image and we aim to train a network to generate an animation following a sequence of such directions. To address this task we design a novel recurrent architecture, which can be trained easily and effectively thanks to an explicit separation of past, future and current states. As we demonstrate in the experiments, our proposed architecture is capable of generating an arbitrary number of frames from a single image and a sequence of motion strokes. Key components of our architecture are an autoencoding constraint to ensure consistency with the past and a generative adversarial scheme to ensure that images look realistic and are temporally smooth. We demonstrate the effectiveness of our approach on the MNIST, KTH, Human3.6M, Push and Weizmann datasets.
△ Less
Submitted 14 August, 2020; v1 submitted 5 December, 2018;
originally announced December 2018.
-
Hole Transport in Exfoliated Monolayer MoS$_2$
Authors:
Evgeniy Ponomarev,
Árpád Pásztor,
Adrien Waelchli,
Alessandro Scarfato,
Nicolas Ubrig,
Christoph Renner,
Alberto F. Morpurgo
Abstract:
Ideal monolayers of common semiconducting transition metal dichalcogenides (TMDCs) such as MoS$_2$, WS$_2$, MoSe$_2$, and WSe$_2$ possess many similar electronic properties. As it is the case for all semiconductors, however, the physical response of these systems is strongly determined by defects in a way specific to each individual compound. Here we investigate the ability of exfoliated monolayer…
▽ More
Ideal monolayers of common semiconducting transition metal dichalcogenides (TMDCs) such as MoS$_2$, WS$_2$, MoSe$_2$, and WSe$_2$ possess many similar electronic properties. As it is the case for all semiconductors, however, the physical response of these systems is strongly determined by defects in a way specific to each individual compound. Here we investigate the ability of exfoliated monolayers of these TMDCs to support high-quality, well-balanced ambipolar conduction, which has been demonstrated for WS$_2$, MoSe$_2$, and WSe$_2$, but not for MoS$_2$. Using ionic-liquid gated transistors we show that, contrary to WS$_2$, MoSe$_2$, and WSe$_2$, hole transport in exfoliated MoS$_2$ monolayers is systematically anomalous, exhibiting a maximum in conductivity at negative gate voltage (V$_G$) followed by a suppression of up to 100 times upon further increasing V$_G$. To understand the origin of this difference we have performed a series of experiments including the comparison of hole transport in MoS$_2$ monolayers and thicker multilayers, in exfoliated and CVD-grown monolayers, as well as gate-dependent optical measurements (Raman and photoluminescence) and scanning tunneling imaging and spectroscopy. In agreement with existing {\it ab-initio} calculations, the results of all these experiments are consistently explained in terms of defects associated to chalcogen vacancies that only in MoS$_2$ monolayers -- but not in thicker MoS$_2$ multilayers nor in monolayers of the other common semiconducting TMDCs -- create in-gap states near the top of the valence band that act as strong hole traps. Our results demonstrate the importance of studying systematically how defects determine the properties of 2D semiconducting materials and of develo** methods to control them.
△ Less
Submitted 24 April, 2018;
originally announced April 2018.