-
5G Wireless and Wired Convergence in a Passive Optical Network using UF-OFDM and GFDM
Authors:
Colm Browning,
Arman Farhang,
Arsalan Saljoghei,
Nicola Marchetti,
Vidak Vujicic,
Linda Doyle,
Liam Barry
Abstract:
The provision of both wireless and wired services in the optical access domain will be an important function for future passive optical networks (PON). With the emergence of 5th generation (5G) mobile communications, a move toward a dense deployment of small cell antenna sites, in conjunction with a cloud radio access network (C-RAN) architecture, is foreseen. This type of network architecture gre…
▽ More
The provision of both wireless and wired services in the optical access domain will be an important function for future passive optical networks (PON). With the emergence of 5th generation (5G) mobile communications, a move toward a dense deployment of small cell antenna sites, in conjunction with a cloud radio access network (C-RAN) architecture, is foreseen. This type of network architecture greatly increases the requirement for high capacity mobile fronthaul and backhaul links. An efficient way of achieving such connectivity is to make use of wavelength division multiplexed (WDM) PON infrastructure where wireless and wired services may be converged for distribution. In this work, for the first time, the convergence of 5G wireless candidate waveforms with a single-carrier wired signal is demonstrated in a PON. Three bands of universally filtered orthogonal frequency division multiplexing (UF-OFDM) and generalized frequency division multiplexing (GFDM), are transmitted at an intermediate frequency in conjunction with a digital 10Gb/s pulse amplitude modulation (PAM) signal in the downlink direction. Orthogonal frequency division multiplexing (OFDM) is also evaluated as a benchmark. Results show, for each waveform, how performance varies due to the 5G channel spacing - indicating UF-OFDM's superiority in terms of PON convergence. Successful transmission over 25km of fibre is also demonstrated for all waveforms.
△ Less
Submitted 6 March, 2017;
originally announced March 2017.
-
Software-Defined Silicon Photonics based Metro Node for Spatial and Wavelength Superchannel Switching
Authors:
Vidak Vujicic,
Aravind P. Anthur,
Alexander Gazman,
Colm Browning,
M. Deseada Gutierrez Pascual,
Ziyi Zhu,
Keren Bergman,
Liam P. Barry
Abstract:
Due to the growing popularity of optical superchannels and software defined networking, reconfigurable optical add-drop multiplexer (ROADM) architectures for superchannel switching have recently attracted significant attention. ROADMs based on micro electro-mechanical system (MEMS) and liquid crystal-on-silicon (LCoS) technologies are predominantly used. Motivated by requirements for low power, hi…
▽ More
Due to the growing popularity of optical superchannels and software defined networking, reconfigurable optical add-drop multiplexer (ROADM) architectures for superchannel switching have recently attracted significant attention. ROADMs based on micro electro-mechanical system (MEMS) and liquid crystal-on-silicon (LCoS) technologies are predominantly used. Motivated by requirements for low power, high-speed, small area footprint and compact switching solutions, we propose and demonstrate spatial and wavelength flexible superchannel switching using monolithically integrated silicon photonics (SiP) micro-ring resonators (MRR). We demonstrate the MRRs capabilities and potential to be used as a fundamental building block in ROADMs. Unicast and multicast switching operation of an entire superchannel is demonstrated after transmission over 50 km of standard single mode fiber. The performance of each sub-channel from the 120 Gb/s QPSK Nyquist superchannel is analyzed and degradation in error vector magnitude performance was observed for outer sub-channels due to the 3-dB bandwidth of the MRRs, which is comparable with the superchannel bandwidth. However, all sub-channels for all switching cases (unicast, multicast and bi-directional operation) exhibit performance far below the 7% FEC limit. The switching time of the SiP MRR chip is such that high capacity superchannel interconnects between users can be setup and reconfigured on the microsecond timescale.
△ Less
Submitted 9 February, 2017; v1 submitted 29 November, 2016;
originally announced December 2016.
-
Mitigation of relative intensity noise of Quantum Dash mode-locked lasers for PAM4 based optical interconnects using encoding techniques
Authors:
Vidak Vujicic,
Aravind P. Anthur,
Arsalan Saljoghei,
Vivek Panapakkam,
Rui Zhou,
Quentin Gaimard,
Ramel Merghem,
Francois Lelarge,
Abderrahi Ramdane,
Liam P. Barry
Abstract:
Quantum Dash (Q-Dash) Passively Mode-Locked Lasers (PMLLs) exhibit significant low frequency Relative Intensity Noise (RIN), due to the high Mode Partition Noise (MPN), which prevents the implementation of multilevel amplitude modulation formats such as PAM4. The authors demonstrate low frequency RIN mitigation by employing 8B/10B and Manchester encoding with PAM4 modulation format. These encoding…
▽ More
Quantum Dash (Q-Dash) Passively Mode-Locked Lasers (PMLLs) exhibit significant low frequency Relative Intensity Noise (RIN), due to the high Mode Partition Noise (MPN), which prevents the implementation of multilevel amplitude modulation formats such as PAM4. The authors demonstrate low frequency RIN mitigation by employing 8B/10B and Manchester encoding with PAM4 modulation format. These encoding techniques reduce the overlap between the modulation spectral content and the low-frequency RIN of the Q-Dash devices, at the expense of increased overhead. The RIN of the 33.6 GHz free spectral range Q-Dash PMLL was characterized, and the results obtained show very high levels of RIN from DC to 4 GHz, but low levels for higher frequencies. The performance improvement for 28 GBaud 8B/10B and Manchester encoded PAM4 signal has been demonstrated compared to the case when no encoding is used. Finally, the effect of RIN on the system performance was demonstrated by comparing the Bit Error Rate (BER) performance of the PAM4 signaling obtained with an External Cavity Laser (ECL) to those obtained with Q-Dash PMLL.
△ Less
Submitted 29 November, 2016;
originally announced December 2016.
-
Reply to 'Comments on Integer SEC-DED codes for low power communications'
Authors:
Aleksandar Radonjic,
Vladimir Vujicic
Abstract:
This paper is a reply to the comments on 'Integer SEC-DED codes for low power communications'.
This paper is a reply to the comments on 'Integer SEC-DED codes for low power communications'.
△ Less
Submitted 5 September, 2012;
originally announced September 2012.
