-
Physics-informed Graphical Neural Network for Power System State Estimation
Authors:
Quang-Ha Ngo,
Bang L. H. Nguyen,
Tuyen V. Vu,
Jianhua Zhang,
Tuan Ngo
Abstract:
State estimation is highly critical for accurately observing the dynamic behavior of the power grids and minimizing risks from cyber threats. However, existing state estimation methods encounter challenges in accurately capturing power system dynamics, primarily because of limitations in encoding the grid topology and sparse measurements. This paper proposes a physics-informed graphical learning s…
▽ More
State estimation is highly critical for accurately observing the dynamic behavior of the power grids and minimizing risks from cyber threats. However, existing state estimation methods encounter challenges in accurately capturing power system dynamics, primarily because of limitations in encoding the grid topology and sparse measurements. This paper proposes a physics-informed graphical learning state estimation method to address these limitations by leveraging both domain physical knowledge and a graph neural network (GNN). We employ a GNN architecture that can handle the graph-structured data of power systems more effectively than traditional data-driven methods. The physics-based knowledge is constructed from the branch current formulation, making the approach adaptable to both transmission and distribution systems. The validation results of three IEEE test systems show that the proposed method can achieve lower mean square error more than 20% than the conventional methods.
△ Less
Submitted 29 December, 2023;
originally announced December 2023.
-
Power Converter Topologies for Electrolyzer Applications to Enable Electric Grid Services
Authors:
Bang L. H. Nguyen,
Mayank Panwar,
Rob Hovsapian,
Kazunori Nagasawa,
Tuyen V. Vu
Abstract:
Hydrogen electrolyzers, with their operational flexibility, can be configured as smart dynamic loads which can provide grid services and facilitate the integration of more renewable energy sources into the electrical grid. However, to enable this ability, the electrolyzer system should be able to control both active and reactive power in coordination with the low-level controller of the electrolyz…
▽ More
Hydrogen electrolyzers, with their operational flexibility, can be configured as smart dynamic loads which can provide grid services and facilitate the integration of more renewable energy sources into the electrical grid. However, to enable this ability, the electrolyzer system should be able to control both active and reactive power in coordination with the low-level controller of the electrolyzer via the power electronics system interface between the utility grid and electrolyzer. This paper discusses power converter topologies and the control scheme of this power electronics interface for electrolyzer applications to enable electricity grid services. For the sake of unity, in this paper, we consider the power converter system interfacing the utility grid at the line-to-line root mean square RMS value of 480 VAC 60 Hz and supplying to the 3500 A 750 kW PEM electrolyzer stack.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Distributed Dynamic State Estimation for Microgrids
Authors:
Bang L. H. Nguyen,
Tuyen V. Vu,
Thomas H. Ortmeyer,
Tuan Ngo
Abstract:
Conventionally, the dynamic state estimation of variables in power networks is performed based on the forecasting-aided model of bus voltages. This approach is effective in the stiff grids at the transmission level, where the bus voltages are less sensitive to variations of the load. However, in microgrids, bus voltages can fluctuate significantly under load changes, the forecasting-aided model ma…
▽ More
Conventionally, the dynamic state estimation of variables in power networks is performed based on the forecasting-aided model of bus voltages. This approach is effective in the stiff grids at the transmission level, where the bus voltages are less sensitive to variations of the load. However, in microgrids, bus voltages can fluctuate significantly under load changes, the forecasting-aided model may not sufficiently accurate. To resolve this problem, this paper proposes a dynamic state estimation scheme for microgrids using the state-space model derived from differential equations of power networks. In the proposed scheme, the branch currents are the state variables, whereas the bus voltages become the inputs which can vary freely with loads. As a result, the entire microgrids system can be partitioned into local areas, where neighbor areas share the common inputs. The proposed estimation scheme then can be implemented in a distributed manner. A novel Kalman-based filtering method is derived to estimate both states and inputs simultaneously. Only information of common inputs is exchanged between neighboring estimators. Simulation results of the 13-bus Potsdam microgrid (New York State) are provided to prove the feasibility and performances of the proposed scheme.
△ Less
Submitted 23 October, 2021;
originally announced October 2021.
-
Distributed Dynamic State-Input Estimation for Power Networks of Microgrids and Active Distribution Systems with Unknown Inputs
Authors:
Bang L. H. Nguyen,
Tuyen V. Vu,
Joseph M. Guerrero,
Mischael Steurer,
Karl Schoder,
Tuan Ngo
Abstract:
This paper proposes a joint input and state dynamic estimation scheme for power networks in microgrids and active distribution systems with unknown inputs. The conventional dynamic state estimation of power networks in the transmission system relies on the forecasting methods to obtain the state-transition model of state variables. However, under highly dynamic conditions in the operation of micro…
▽ More
This paper proposes a joint input and state dynamic estimation scheme for power networks in microgrids and active distribution systems with unknown inputs. The conventional dynamic state estimation of power networks in the transmission system relies on the forecasting methods to obtain the state-transition model of state variables. However, under highly dynamic conditions in the operation of microgrids and active distribution networks, this approach may become ineffective as the forecasting accuracy is not guaranteed. To overcome such drawbacks, this paper employs the power networks model derived from the physical equations of branch currents. Specifically, the power network model is a linear state-space model, in which the state vector consists of branch currents, and the input vector consists of bus voltages. To estimate both state and input variables, we propose linear Kalman-based dynamic filtering algorithms in batch-mode regression form, considering the cross-correlation between states and inputs. For the scalability of the proposed scheme, the distributed implementation is also presented. Complementarily, the predicted state and input vectors are leveraged for bad data detection. Results carried out on a 13-bus microgrid system in real-time Opal-RT platform demonstrate the effectiveness of the proposed method in comparison with the traditional weighted least square and tracking state estimation methods.
△ Less
Submitted 3 August, 2021;
originally announced August 2021.
-
Induced Ferromagnetism in bilayer Hexagonal Boron Nitride (h-BN) on vacancy defects at B and N sites
Authors:
B. Chettri,
P. K. Patra,
Tuan V. Vu,
Lalrinkima,
Abu Yaya,
Kingsley O. Obodo,
Ngoc Thanh Thuy Tran,
A. Laref,
D. P. Rai
Abstract:
We investigated the electronic and optical properties of bilayer AB stacked Boron and Nitrogen vacancies in hexagonal Boron Nitride (h-BN) using density functional theory (DFT). The density of states (DOS) and electronic band structure showed that Boron vacancy in bilayer h-BN results in a magnetic and conducting ground state. The band gap energy ranges from 4.56 eV for the pristine BN bilayer to…
▽ More
We investigated the electronic and optical properties of bilayer AB stacked Boron and Nitrogen vacancies in hexagonal Boron Nitride (h-BN) using density functional theory (DFT). The density of states (DOS) and electronic band structure showed that Boron vacancy in bilayer h-BN results in a magnetic and conducting ground state. The band gap energy ranges from 4.56 eV for the pristine BN bilayer to 0.12 eV for a single Nitrogen vacancy in the bilayer. Considering the presence of 1,3,4-Boron vacancy, half metallic character is observed. However, the 2-boron vacancy configuration resulted in metallic character. The bilayers with 1,2,3,4- Nitrogen vacancy has a band gap of 0.39, 0.33, 0.28 and 0.12eV respectively, which is significantly less than the pristine band gap. Also B and N vacancy induces ferromagnetism in the h-BN bilayer. The maximum total magnetic moment for the Boron vacant system is 6.583uB in case of 4-Boron vacancy configuration. In case of Nitrogen vacancy system it is 3.926uB for 4-Nitrogen vacancy configuration. The optical response of the system is presented in terms of the absorption coefficient, refractive index and dielectric constant for pristine as well as the defective configurations. Negative value of dielectric constant for Boron vacant system in the energy range 0.9-1.4 eV and for Nitrogen vacant system in the energy range 0.5-0.8 eV opens an opportunity for it to be utilized for negative index optical materials. The current study shows that B and N vacancies in bilayer h-BN could have potential applications in nano-structure based electronics, optoelectronics and spintronic devices.
△ Less
Submitted 21 March, 2020;
originally announced March 2020.
-
Decentralized Dynamic State Estimation in Microgrids
Authors:
Bang L. H. Nguyen,
Tuyen V. Vu,
Tuan A. Ngo
Abstract:
This paper proposes a decentralized dynamic state estimation scheme for microgrids. The approach employs the voltage and current measurements in the dq0 reference frame through phasor synchronization to be able to exclude orthogonal functions from their relationship formulas. Based on that premise, we utilize a Kalman filter to dynamically estimate states of microgrids. The decoupling of measureme…
▽ More
This paper proposes a decentralized dynamic state estimation scheme for microgrids. The approach employs the voltage and current measurements in the dq0 reference frame through phasor synchronization to be able to exclude orthogonal functions from their relationship formulas. Based on that premise, we utilize a Kalman filter to dynamically estimate states of microgrids. The decoupling of measurement values to state and input vectors reduces the computational complexity. The Kalman filter considers the process noise covariances, which are modified with respect to the covariance of measured input values. Theoretical analysis and simulation results are provided for validation.
△ Less
Submitted 6 July, 2019;
originally announced July 2019.
-
Predictive Control for Energy Management in Ship Power Systems under High-power Ramp Rate Loads
Authors:
Tuyen V. Vu,
David Gonsoulin,
Fernand Diaz,
Chris S. Edrington,
Touria El-Mezyani
Abstract:
Electrical weapons and combat systems integrated into ships create challenges for their power systems. The main challenge is operation under high-power ramp rate loads, such as rail-guns and radar systems. When operated, these load devices may exceed the ships generators in terms of power ramp rate, which may drive the system to instability. Thus, electric ships require integration of energy stora…
▽ More
Electrical weapons and combat systems integrated into ships create challenges for their power systems. The main challenge is operation under high-power ramp rate loads, such as rail-guns and radar systems. When operated, these load devices may exceed the ships generators in terms of power ramp rate, which may drive the system to instability. Thus, electric ships require integration of energy storage devices in coordination with the power generators to maintain the power balance between distributed resources and load devices. In order to support the generators by using energy storage systems, an energy management scheme must be deployed to ensure load demand is met. This paper proposes and implements an energy management scheme based on model predictive control to optimize the coordination between the energy storage and the power generators under high-power ramp rate conditions. The simulation and experimental results validate the proposed technique in a reduced scale, notional electric ship power system.
△ Less
Submitted 7 April, 2017; v1 submitted 6 April, 2017;
originally announced April 2017.
-
Robust adaptive droop control for DC microgrids
Authors:
Tuyen V. Vu,
Dallas Perkins,
Fernand Diaz,
David Gonsoulin,
Chris S. Edrington,
Touria El-Mezyani
Abstract:
There are tradeoffs between current sharing among distributed resources and DC bus voltage stability when conventional droop control is used in DC microgrids. As current sharing approaches the setpoint, bus voltage deviation increases. Previous studies have suggested using secondary control utilizing linear controllers to overcome drawbacks of droop control. However, linear control design depends…
▽ More
There are tradeoffs between current sharing among distributed resources and DC bus voltage stability when conventional droop control is used in DC microgrids. As current sharing approaches the setpoint, bus voltage deviation increases. Previous studies have suggested using secondary control utilizing linear controllers to overcome drawbacks of droop control. However, linear control design depends on an accurate model of the system. The derivation of such a model is challenging because the noise and disturbances caused by the coupling between sources, loads, and switches in microgrids are under-represented. This under-representation makes linear modeling and control insufficient. Hence, in this paper, we propose a robust adaptive control to adjust droop characteristics to satisfy both current sharing and bus voltage stability. First, the time-varying models of DC microgrids are derived. Second, the improvements for the adaptive control method are presented. Third, the application of the enhanced adaptive method to DC microgrids is presented to satisfy the system objective. Fourth, simulation and experimental results on a microgrid show that the adaptive method precisely shares current between two distributed resources and maintains the nominal bus voltage. Last, the comparative study validates the effectiveness of the proposed method over the conventional method.
△ Less
Submitted 22 January, 2017; v1 submitted 16 January, 2017;
originally announced January 2017.
-
An Alternative Distributed Control Architecture for Improvement in the Transient Response of DC Microgrids
Authors:
T. V. Vu,
S. Paran,
F. Diaz,
T. E. Meyzani,
C. S. Edrington
Abstract:
Distributed secondary control plays an important role in DC microgrids, since it ensures system control objectives, which are power sharing and DC bus voltage stability. Previous studies have suggested using a control architecture that utilizes a parallel secondary bus voltage and current sharing compensation. However, the parallel controllers have a mutual impact on each other, which degrades the…
▽ More
Distributed secondary control plays an important role in DC microgrids, since it ensures system control objectives, which are power sharing and DC bus voltage stability. Previous studies have suggested using a control architecture that utilizes a parallel secondary bus voltage and current sharing compensation. However, the parallel controllers have a mutual impact on each other, which degrades the transient performance of the system. This paper reports on an alternative distributed secondary control architecture and controller design process, based on small signal analysis to alleviate the mutual effect of the current sharing and bus voltage compensation, and to improve the transient response of the system. Experimental results confirm the improved transient performance in the current sharing control and DC bus voltage stability utilizing the proposed control architecture.
△ Less
Submitted 17 August, 2016;
originally announced August 2016.
