Showing 1–5 of 5 results for author: Voy, D

A Modern Ethernet Data Acquisition Architecture for Fermilab Beam Instrumentation

Authors: R. Santucci, J. Diamond, N. Eddy, A. Semenov, D. Voy

Abstract: The Fermilab Accelerator Division, Instrumentation Department is adopting an open-source framework to replace our embedded VME-based data acquisition systems. Utilizing an iterative methodology, we first moved to embedded Linux, removing the need for VxWorks. Next, we adopted Ethernet on each data acquisition module eliminating the need for the VME backplane in addition to communicating with a rac… ▽ More The Fermilab Accelerator Division, Instrumentation Department is adopting an open-source framework to replace our embedded VME-based data acquisition systems. Utilizing an iterative methodology, we first moved to embedded Linux, removing the need for VxWorks. Next, we adopted Ethernet on each data acquisition module eliminating the need for the VME backplane in addition to communicating with a rack mount server. Development of DDCP (Distributed Data Communications Protocol), allowed for an abstraction between the firmware and software layers. Each data acquisition module was adapted to read out using 1 GbE and aggregated at a switch which up linked to a 10 GbE network. Current development includes scaling the system to aggregate more modules, to increase bandwidth to support multiple systems and to adopt MicroTCA as a crate technology. The architecture was utilized on various beamlines around the Fermilab complex including PIP2IT, FAST/IOTA and the Muon Delivery Ring. In summary, we were able to develop a data acquisition framework which incrementally replaces VxWorks & VME hardware as well as increases our total bandwidth to 10 Gbit/s using off the shelf Ethernet technology. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Report number: FERMILAB-PUB-22-698-AD

Tevatron Beam Position Monitor Upgrade

Authors: G. Annala, B. Banerjee, B. Barker, T. Boes, M. Bowden, C. Briegel, G. Cancelo, G. Duerling, B. Forster, S. Foulkes, B. Haynes, B. Hendricks, T. Kasza, R. Kutschke, R. Mahlum, M. Martens, M. Olson, V. Pavlicek, L. Piccoli, P. Prieto, J. Steimel, K. Treptow, M. Votava, D. Voy, M. Wendt , et al. (2 additional authors not shown)

Abstract: This paper describes the development of a digital-based Beam Position System which was designed, developed, and adapted for the Tevatron during Collider Run II. This paper describes the development of a digital-based Beam Position System which was designed, developed, and adapted for the Tevatron during Collider Run II. △ Less

Submitted 26 September, 2012; originally announced September 2012.

Comments: 20 pp

Report number: FERMILAB-PUB-11-588-AD

Journal ref: JINST 6 (2011) T11005

A Wire Position Monitor System for the 1.3 GHZ Tesla-Style Cryomodule at the Fermilab New-Muon-Lab Accelerator

Authors: N. Eddy, B. Fellenz, P. Prieto, A. Semenov, D. C. Voy, M. Wendt

Abstract: The first cryomodule for the beam test facility at the Fermilab New-Muon-Lab building is currently under RF commissioning. Among other diagnostics systems, the transverse position of the helium gas return pipe with the connected 1.3 GHz SRF accelerating cavities is measured along the ~15 m long module using a stretched-wire position monitoring system. An overview of the wire position monitor syste… ▽ More The first cryomodule for the beam test facility at the Fermilab New-Muon-Lab building is currently under RF commissioning. Among other diagnostics systems, the transverse position of the helium gas return pipe with the connected 1.3 GHz SRF accelerating cavities is measured along the ~15 m long module using a stretched-wire position monitoring system. An overview of the wire position monitor system technology is given, along with preliminary results taken at the initial module cool down, and during further testing. As the measurement system offers a high resolution, we also discuss options for use as a vibration detector. △ Less

Submitted 21 September, 2012; originally announced September 2012.

Comments: 4 pp. 15th International Conference on RF Superconductivity (SRF2011). 25-29 Jul 2011. Chicago, Illinois, USA

Report number: FERMILAB-CONF-11-382-AD

High Resolution BPM Upgrade for the ATF Dam** Ring at KEK

Authors: N. Eddy, C. Briegel, B. Fellenz, E. Gianfelice-Wendt, P. Prieto, R. Rechenmacher, A. Semenov, D. Voy, M. Wendt, D. Zhang, N. Terunuma, J. Urakawa

Abstract: A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) dam** ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The techni… ▽ More A beam position monitor (BPM) upgrade at the KEK Accelerator Test Facility (ATF) dam** ring has been accomplished, carried out by a KEK/FNAL/SLAC collaboration under the umbrella of the global ILC R&D effort. The upgrade consists of a high resolution, high reproducibility read-out system, based on analog and processing, and also implements a new automatic gain error correction schema. The technical concept and realization as well as results of beam studies are presented. △ Less

Submitted 20 September, 2012; originally announced September 2012.

Comments: 3 pp. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators DIPAC 2011, 16-18 May 2011. Hamburg, Germany

Report number: FERMILAB-CONF-11-383-AD

Instrument Front-Ends at Fermilab During Run II

Authors: Thomas Meyer, David Slimmer, Duane Voy

Abstract: The optimization of an accelerator relies on the ability to monitor the behavior of the beam in an intelligent and timely fashion. The use of processor-driven front-ends allowed for the deployment of smart systems in the field for improved data collection and analysis during Run II. This paper describes the implementation of the two main systems used: National Instruments LabVIEW running on PCs, a… ▽ More The optimization of an accelerator relies on the ability to monitor the behavior of the beam in an intelligent and timely fashion. The use of processor-driven front-ends allowed for the deployment of smart systems in the field for improved data collection and analysis during Run II. This paper describes the implementation of the two main systems used: National Instruments LabVIEW running on PCs, and WindRiver's VxWorks real-time operating system running in a VME crate processor. △ Less

Submitted 12 September, 2012; originally announced September 2012.

Comments: 8 pp

Report number: FERMILAB-PUB-11-321-AD

Journal ref: JINST 6 (2011) T11004