-
Wetting on Silicone Surfaces
Authors:
Lukas Hauer,
Abhinav Naga,
Rodrique G. M. Badr,
Jonathan T. Pham,
William S. Y. Wong,
Doris Vollmer
Abstract:
Silicone is frequently used as a model system to investigate and tune wetting on soft materials. Silicone is biocompatible and shows excellent thermal, chemical, and UV stability. Moreover, the mechanical properties of the surface can be easily varied by several orders of magnitude in a controlled manner. Polydimethylsiloxane (PDMS) is a popular choice for coating applications such as lubrication,…
▽ More
Silicone is frequently used as a model system to investigate and tune wetting on soft materials. Silicone is biocompatible and shows excellent thermal, chemical, and UV stability. Moreover, the mechanical properties of the surface can be easily varied by several orders of magnitude in a controlled manner. Polydimethylsiloxane (PDMS) is a popular choice for coating applications such as lubrication, self-cleaning, and drag reduction, facilitated by low surface energy. Aiming to understand the underlying interactions and forces, motivated numerous and detailed investigations of the static and dynamic wetting behavior of drops on PDMS-based surfaces. Here, we recognize the three most prevalent PDMS surface variants, namely liquid-infused (SLIPS/LIS), elastomeric, and liquid-like (SOCAL) surfaces. To understand, optimize, and tune the wetting properties of these PDMS surfaces, we review and compare their similarities and differences by discussing (i) the chemical and molecular structure, and (ii) the static and dynamic wetting behavior. We also provide (iii) an overview of methods and techniques to characterize PDMS-based surfaces and their wetting behavior. The static and dynamic wetting ridge is given particular attention, as it dominates energy dissipation, adhesion, and friction of sliding drops and influences the durability of the surfaces. We also discuss special features such as cloaking and wetting-induced phase separation. Key challenges and opportunities of these three surface variants are outlined.
△ Less
Submitted 1 July, 2024; v1 submitted 8 April, 2024;
originally announced April 2024.
-
Cloaking Transition of Droplets on Lubricated Brushes
Authors:
Rodrique G. M. Badr,
Lukas Hauer,
Doris Vollmer,
Friederike Schmid
Abstract:
We study the equilibrium properties and the wetting behavior of a simple liquid on a polymer brush, with and without presence of lubricant by multibody Dissipative Particle Dynamics simulations. The lubricant is modelled as a polymeric liquid consisting of short chains that are chemically identical to the brush polymers. We investigate the behavior of the brush in terms of the grafting density and…
▽ More
We study the equilibrium properties and the wetting behavior of a simple liquid on a polymer brush, with and without presence of lubricant by multibody Dissipative Particle Dynamics simulations. The lubricant is modelled as a polymeric liquid consisting of short chains that are chemically identical to the brush polymers. We investigate the behavior of the brush in terms of the grafting density and the amount of lubricant present. Regarding the wetting behavior, we study a sessile droplet on top of the brush. The droplet consists of non-bonded particles that form a dense phase. Our model and choice of parameters result in the formation of a wetting ridge and in the cloaking of the droplet by the lubricant, i.e. the lubricant chains creep up onto the droplet and eventually cover its surface completely. Cloaking is a phenomenon that is observed experimentally and is of integral importance to the dynamics of sliding droplets. We quantify the cloaking in terms of its thickness, which increases with the amount of lubricant present. The analysis reveals a well-defined transition point where the cloaking sets in. We propose a thermodynamic theory to explain this behavior. In addition we investigate the dependence of the contact angles on the size of the droplet and the possible effect of line tension. We quantify the variation of the contact angle with the curvature of the contact line on a lubricant free brush and find a negative value for the line tension. Finally we investigate the effect of cloaking/lubrication on the contact angles and the wetting ridge. We find that lubrication and cloaking reduce the contact angles by a couple of degrees. The effect on the wetting ridge is a reduction in the extension of the brush chains near the three phase contact line, an effect that was also observed in experiments of droplets on crosslinked gels.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Dynamics of Droplets Moving on Lubricated Polymer Brushes
Authors:
Rodrique G. M. Badr,
Lukas Hauer,
Doris Vollmer,
Friederike Schmid
Abstract:
Understanding the dynamics of drops on polymer-coated surfaces is crucial for optimizing applications such as self-cleaning materials or microfluidic devices. While the static and dynamic properties of deposited drops have been well characterised, a microscopic understanding of the underlying dynamics is missing. In particular, it is unclear how drop dynamics depends on the amount of uncrosslinked…
▽ More
Understanding the dynamics of drops on polymer-coated surfaces is crucial for optimizing applications such as self-cleaning materials or microfluidic devices. While the static and dynamic properties of deposited drops have been well characterised, a microscopic understanding of the underlying dynamics is missing. In particular, it is unclear how drop dynamics depends on the amount of uncrosslinked chains in the brush, because experimental techniques fail to quantify those. Here we use coarse-grained simulations to study droplets moving on a lubricated polymer brush substrate under the influence of an external body force. The simulation model is based on the many body dissipative particle dynamics (mDPD) method and designed to mimic a system of water droplets on polydimethylsiloxane (PDMS) brushes with chemically identical PDMS lubricant. In agreement with experiments, we find a sublinear power law dependence between the external force $F$ and the droplet velocity $v$, $F \propto v^α$ with $α<1$; however, the exponents differ ($α\sim 0.6-0.7$ in simulations versus $α\sim 0.25$ in experiments). With increasing velocity, the droplets elongate and the receding contact angle decreases, whereas the advancing contact angle remains roughly constant. Analyzing the flow profiles inside the droplet reveals that the droplets do not slide, but roll, with vanishing slip at the substrate surface. Surprisingly, adding lubricant has very little effect on the effective friction force between the droplet and the substrate, even though it has a pronounced effect on the size and structure of the wetting ridge, especially above the cloaking transition.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Development of a prototype superconducting radio-frequency cavity for conduction-cooled accelerators
Authors:
G. Ciovati,
J. Anderson,
S. Balachandran,
G. Cheng,
B. Coriton,
E. Daly,
P. Dhakal,
A. Gurevich,
F. Hannon,
K. Harding,
L. Holland,
F. Marhauser,
K. McLaughlin,
D. Packard,
T. Powers,
U. Pudasaini,
J. Rathke,
R. Rimmer,
T. Schultheiss,
H. Vennekate,
D. Vollmer
Abstract:
The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by therm…
▽ More
The higher efficiency of superconducting radio-frequency (SRF) cavities compared to normal-conducting ones enables the development of high-energy continuous-wave linear accelerators (linacs). Recent progress in the development of high-quality Nb$_3$Sn film coatings along with the availability of cryocoolers with high cooling capacity at 4 K makes it feasible to operate SRF cavities cooled by thermal conduction at relevant accelerating gradients for use in accelerators. A possible use of conduction-cooled SRF linacs is for environmental applications, requiring electron beams with energy of $1 - 10$ MeV and 1 MW of power. We have designed a 915 MHz SRF linac for such an application and developed a prototype single-cell cavity to prove the proposed design by operating it with cryocoolers at the accelerating gradient required for 1 MeV energy gain. The cavity has a $\sim 3$ $μ$m thick Nb$_3$Sn film on the inner surface, deposited on a $\sim4$ mm thick bulk Nb substrate and a bulk $\sim7$ mm thick Cu outer shell with three Cu attachment tabs. The cavity was tested up to a peak surface magnetic field of 53 mT in liquid He at 4.3 K. A horizontal test cryostat was designed and built to test the cavity cooled with three Gifford-McMahon cryocoolers. The rf tests of the conduction-cooled cavity, performed at General Atomics, achieved a peak surface magnetic field of 50 mT and stable operation was possible with up to 18.5 W of rf heat load. The peak frequency shift due to microphonics was 23 Hz. These results represent the highest peak surface magnetic field achieved in a conduction-cooled SRF cavity to date and meet the requirements for a 1 MeV energy gain.
△ Less
Submitted 22 March, 2023; v1 submitted 14 February, 2023;
originally announced February 2023.
-
Phase Separation in Wetting Ridges of Sliding Drops on Soft and Swollen Surfaces
Authors:
Lukas Hauer,
Zhuoyun Cai,
Doris Vollmer,
Jonathan T. Pham
Abstract:
Drops in contact with swollen, elastomeric substrates can induce a capillary-mediated phase separation in wetting ridges. Using laser scanning confocal microscopy, we visualize phase separation of oligomeric silicone oil from a crosslinked silicone network during steady-state sliding of water drops. We find an inverse relationship between the oil tip height and the drop sliding speed, which is rat…
▽ More
Drops in contact with swollen, elastomeric substrates can induce a capillary-mediated phase separation in wetting ridges. Using laser scanning confocal microscopy, we visualize phase separation of oligomeric silicone oil from a crosslinked silicone network during steady-state sliding of water drops. We find an inverse relationship between the oil tip height and the drop sliding speed, which is rationalized by competing transport timescales of oil molecules: separation rate and drop-advection speed. Separation rates in highly swollen networks are as fast as diffusion in pure melts.
△ Less
Submitted 23 August, 2022;
originally announced August 2022.
-
Enhancing condensation on soft substrates through bulk lubricant infusion
Authors:
Chander Shekhar Sharma,
Athanasios Milionis,
Abhinav Naga,
Cheuk Wing Edmond Lam,
Gabriel Rodriguez,
Marco Francesco Del Ponte,
Valentina Negri,
Hopf Raoul,
Maria D'Acunzi,
Hans-Jürgen Butt,
Doris Vollmer,
Dimos Poulikakos
Abstract:
Soft substrates such as polydimethylsiloxane (PDMS) enhance droplet nucleation during the condensation of water vapour, because their deformability inherently reduces the energetic threshold for heterogeneous nucleation relative to rigid substrates. However, this enhanced droplet nucleation is counteracted later in the condensation cycle, when the viscoelastic dissipation inhibits condensate dropl…
▽ More
Soft substrates such as polydimethylsiloxane (PDMS) enhance droplet nucleation during the condensation of water vapour, because their deformability inherently reduces the energetic threshold for heterogeneous nucleation relative to rigid substrates. However, this enhanced droplet nucleation is counteracted later in the condensation cycle, when the viscoelastic dissipation inhibits condensate droplet shedding from the substrate. Here, we show that bulk lubricant infusion in the soft substrate is a potential pathway for overcoming this limitation. We demonstrate that even 5% bulk lubricant infusion in PDMS reduces viscoelastic dissipation in the substrate by more than 30 times and more than doubles the droplet nucleation density. We correlate the droplet nucleation and growth rate with the material properties controlled by design, i.e. the fraction and composition of uncrosslinked chains, shear modulus, and viscoelastic dissipation. Through in-situ, microscale condensation on the substrates, we show that the increase in nucleation density and reduction in pre-coalescence droplet growth rate is insensitive to the percentage of lubricant in PDMS. Our results indicate the presence of a lubricant layer on the substrate surface that cloaks the growing condensate droplets. We visualize the cloaking effect and show that lubricant infusion in PDMS significantly increases the rate of cloaking compared to PDMS without any lubricant infusion. Finally, we show that the overall enhanced condensation due to bulk lubricant infusion in PDMS leads to more than 40% increase in dewing on the substrate.
△ Less
Submitted 26 August, 2021;
originally announced August 2021.
-
Lifting a sessile oil drop from a superamphiphobic surface with an impacting one
Authors:
Olinka Ramírez-Soto,
Vatsal Sanjay,
Detlef Lohse,
Jonathan T. Pham,
Doris Vollmer
Abstract:
Colliding drops are widely encountered in everyday technologies and natural processes, from combustion engines and commodity sprays to raindrops and cloud formation. The outcome of a collision depends on many factors, including the impact velocity and the degree of head-on alignment, in addition to intrinsic properties like surface tension. Yet little is known on the binary impact dynamics of low…
▽ More
Colliding drops are widely encountered in everyday technologies and natural processes, from combustion engines and commodity sprays to raindrops and cloud formation. The outcome of a collision depends on many factors, including the impact velocity and the degree of head-on alignment, in addition to intrinsic properties like surface tension. Yet little is known on the binary impact dynamics of low surface tension oil drops on a low-wetting surface. We experimentally and numerically investigate the dynamics of an oil drop impacting an identical sessile drop sitting on a superamphiphobic surface. We observe five rebound scenarios, four of which do not involve coalescence. We describe two previously unexplored cases for sessile oil drop lift-off, resulting from a drop-on-drop impact event. The simulations quantitatively reproduce all rebound scenarios and enable quantification of the velocity profiles, the energy transfer, and the viscous dissipation. Our results illustrate how varying the relative offset and the impact velocity results in controllable rebound dynamics for low surface tension drop collisions on superamphiphobic surfaces.
△ Less
Submitted 19 January, 2021; v1 submitted 5 December, 2019;
originally announced December 2019.
-
The Cassie-Wenzel transition of fluids on nanostructured substrates: Macroscopic force balance versus microscopic density-functional theory
Authors:
Nikita Tretyakov,
Periklis Papadopoulos,
Doris Vollmer,
Hans-Jürgen Butt,
Burkhard Dünweg,
Kostas Ch. Daoulas
Abstract:
Classical density functional theory is applied to investigate the validity of a phenomenological force-balance description of the stability of the Cassie state of liquids on substrates with nanoscale corrugation. A bulk free-energy functional of third order in local density is combined with a square-gradient term, describing the liquid-vapor interface. The bulk free energy is parameterized to repr…
▽ More
Classical density functional theory is applied to investigate the validity of a phenomenological force-balance description of the stability of the Cassie state of liquids on substrates with nanoscale corrugation. A bulk free-energy functional of third order in local density is combined with a square-gradient term, describing the liquid-vapor interface. The bulk free energy is parameterized to reproduce the liquid density and the compressibility of water. The square-gradient term is adjusted to model the width of the water-vapor interface. The substrate is modeled by an external potential, based upon Lennard-Jones interactions. The three-dimensional calculation focuses on substrates patterned with nanostripes and square-shaped nanopillars. Using both the force-balance relation and density-functional theory, we locate the Cassie-to-Wenzel transition as a function of the corrugation parameters. We demonstrate that the force-balance relation gives a qualitatively reasonable description of the transition even on the nanoscale. The force balance utilizes an effective contact angle between the fluid and the vertical wall of the corrugation to parameterize the impalement pressure. This effective angle is found to have values smaller than the Young contact angle. This observation corresponds to an impalement pressure that is smaller than the value predicted by macroscopic theory. Therefore, this effective angle embodies effects specific to nanoscopically corrugated surfaces, including the finite range of the liquid-solid potential (which has both repulsive and attractive parts), line tension, and the finite interface thickness. Consistently with this picture, both patterns (stripes and pillars) yield the same effective contact angles for large periods of corrugation.
△ Less
Submitted 11 October, 2016; v1 submitted 6 July, 2016;
originally announced July 2016.
-
The collapse of linear polyelectrolyte chains in a poor solvent: When does a collapsing polyelectrolyte collect its counter ions?
Authors:
Peter Loh,
G. Roshan Deen,
Doris Vollmer,
Karl Fischer,
Manfred Schmidt,
Arindam Kundagrami,
Murugappan Muthukumar
Abstract:
In order to better understand the collapse of polyions in poor solvent conditions the effective charge and the solvent quality of the hypothetically uncharged polymer backbone need to be known. In the present work this is achieved by utilizing poly-2-vinylpyridine quaternized to 4.3% with ethylbromide. Conductivity and light scattering measurements were utilized to study the polyion collapse in…
▽ More
In order to better understand the collapse of polyions in poor solvent conditions the effective charge and the solvent quality of the hypothetically uncharged polymer backbone need to be known. In the present work this is achieved by utilizing poly-2-vinylpyridine quaternized to 4.3% with ethylbromide. Conductivity and light scattering measurements were utilized to study the polyion collapse in isorefractive solvent/non-solvent mixtures consisting of 1-propanol and 2-pentanone, respectively, at nearly constant dielectric constant. The solvent quality of the uncharged polyion could be quantified which, for the first time, allowed the experimental investigation of the effect of the electrostatic interaction prior and during polyion collapse, by comparing to a newly developed theory. Although the Manning parameter for the investigated system is as low as $l_B/l = 0.6$ ($l_B$ the Bjerrum length and $l$ the mean contour distance between two charges), i.e. no counterion binding should occur, a qualitative interpretation of the conductivity data revealed that the polyion chain already collects its counter ions when the dimensions start to shrink below the good solvent limit but are still well above the $θ$-dimension.
△ Less
Submitted 2 January, 2009;
originally announced January 2009.
-
Time-resolved X-ray microscopy of nanoparticle aggregates under oscillatory shear
Authors:
G. K. Auernhammer,
K. Fauth,
B. Ullrich,
J. Zhao,
M. Weigand,
D. Vollmer
Abstract:
Of all current detection techniques with nanometer resolution, only X-ray microscopy allows imaging nanoparticles in suspension. Can it also be used to investigate structural dynamics? When studying response to mechanical stimuli, the challenge lies in applying them with precision comparable to spatial resolution. In the first shear experiments performed in an X-ray microscope, we accomplished t…
▽ More
Of all current detection techniques with nanometer resolution, only X-ray microscopy allows imaging nanoparticles in suspension. Can it also be used to investigate structural dynamics? When studying response to mechanical stimuli, the challenge lies in applying them with precision comparable to spatial resolution. In the first shear experiments performed in an X-ray microscope, we accomplished this by inserting a piezo actuator driven shear cell into the focal plane of a scanning transmission X-ray microscope (STXM). Thus shear-induced reorganization of magnetite nanoparticle aggregates could be demonstrated in suspension. As X-ray microscopy proves suitable for studying structural change, new prospects open up in physics at small length scales.
△ Less
Submitted 5 December, 2008;
originally announced December 2008.
-
Frequency dependent deformation of liquid crystal droplets in an external electric field
Authors:
Günter K. Auernhammer,
**yu Zhao,
Beate Ullrich,
Doris Vollmer
Abstract:
Nematic drops suspended in the isotropic phase of the same substance were subjected to alternating electrical fields of varying frequency. The system was carefully kept in the isotropic-nematic coexistance region, which was broadened due to small amounts of non-mesogenic additives. Whereas the droplets remained spherical at low (order of 10 Hz) and high frequencies (in the kHz range), at interme…
▽ More
Nematic drops suspended in the isotropic phase of the same substance were subjected to alternating electrical fields of varying frequency. The system was carefully kept in the isotropic-nematic coexistance region, which was broadened due to small amounts of non-mesogenic additives. Whereas the droplets remained spherical at low (order of 10 Hz) and high frequencies (in the kHz range), at intermediate frequencies, we observed a marked flattening of the droplet in the plane perpendicular to the applied field. The deformation of the liquid crystal (LC) droplets occurred both in substances with positive and negative dielectric anisotropy. The experimental data can be quantitatively modelled with a combination of the leaky dielectric model and screening of the applied electric field due to the finite conductivity.
△ Less
Submitted 26 March, 2009; v1 submitted 3 December, 2008;
originally announced December 2008.
-
Phase Separation in Binary Fluid Mixtures with Continuously Ramped Temperature
Authors:
M. E. Cates,
J. Vollmer,
A. Wagner,
D. Vollmer
Abstract:
We consider the demixing of a binary fluid mixture, under gravity, which is steadily driven into a two phase region by slowly ram** the temperature. We assume, as a first approximation, that the system remains spatially isothermal, and examine the interplay of two competing nonlinearities. One of these arises because the supersaturation is greatest far from the meniscus, creating inversion of…
▽ More
We consider the demixing of a binary fluid mixture, under gravity, which is steadily driven into a two phase region by slowly ram** the temperature. We assume, as a first approximation, that the system remains spatially isothermal, and examine the interplay of two competing nonlinearities. One of these arises because the supersaturation is greatest far from the meniscus, creating inversion of the density which can lead to fluid motion; although isothermal, this is somewhat like the Benard problem (a single-phase fluid heated from below). The other is the intrinsic diffusive instability which results either in nucleation or in spinodal decomposition at large supersaturations. Experimental results on a simple binary mixture show interesting oscillations in heat capacity and optical properties for a wide range of ramp parameters. We argue that these oscillations arise under conditions where both nonlinearities are important.
△ Less
Submitted 3 April, 2003;
originally announced April 2003.
