-
Efficient and robust second-harmonic generation in thin-film lithium niobate using modal phase matching
Authors:
Mikkel T. Hansen,
Emil Z. Ulsig,
Fabien Labbe,
Magnus L. Madsen,
Yunhong Ding,
Karsten Rottwitt,
Nicolas Volet
Abstract:
A double-ridge waveguide is designed for efficient and robust second-harmonic generation (SHG) using the thin-film lithium-niobate-on-insulator (LNOI) platform. Perfect phase matching (PhM) is achieved between the fundamental waveguide mode at 1550 nm and a higher-order mode at the second harmonic. The fabrication tolerances of the PhM condition are simulated using a finite-difference method mode…
▽ More
A double-ridge waveguide is designed for efficient and robust second-harmonic generation (SHG) using the thin-film lithium-niobate-on-insulator (LNOI) platform. Perfect phase matching (PhM) is achieved between the fundamental waveguide mode at 1550 nm and a higher-order mode at the second harmonic. The fabrication tolerances of the PhM condition are simulated using a finite-difference method mode solver, and conversion efficiencies as high as 3.92/W are obtained for a 1-cm long waveguide. This design allows access to the largest element of the second-order nonlinear susceptibility tensor, and represents a scalable alternative to waveguides based on periodically-poled lithium niobate (PPLN). The design has the potential for generating pairs of entangled photons in the infrared C-band by spontaneous parametric down-conversion (SPDC).
△ Less
Submitted 24 November, 2023;
originally announced November 2023.
-
Continuous-wave second-harmonic generation in the far-UVC pumped by a blue laser diode
Authors:
Eric J. Stanton,
Peter Tønning,
Emil Z. Ulsig,
Stig Calmar,
Maiya A. Bourland,
Simon T. Thomsen,
Kevin B. Gravesen,
Peter Johansen,
Nicolas Volet
Abstract:
Far-UVC light in the wavelength range of 200-230 nm has attracted renewed interest because of its safety for human exposure and effectiveness in inactivating pathogens. Here we present a compact solid-state far-UVC laser source based on second-harmonic generation (SHG) using a low-cost commercially-available blue laser diode pump. Leveraging the high intensity of light in a nanophotonic waveguide…
▽ More
Far-UVC light in the wavelength range of 200-230 nm has attracted renewed interest because of its safety for human exposure and effectiveness in inactivating pathogens. Here we present a compact solid-state far-UVC laser source based on second-harmonic generation (SHG) using a low-cost commercially-available blue laser diode pump. Leveraging the high intensity of light in a nanophotonic waveguide and heterogeneous integration, our approach achieves Cherenkov phase-matching across a bonded interface consisting of a silicon nitride (SiN) waveguide and a beta barium borate (BBO) nonlinear crystal. Through systematic investigations of waveguide dimensions and pump power, we analyze the dependencies of Cherenkov emission angle, conversion efficiency, and output power. Experimental results confirm the feasibility of generating far-UVC, paving the way for mass production in a compact form factor. This solid-state far-UVC laser source shows significant potential for applications in human-safe disinfection, non-line-of-sight free-space communication, and deep-UV Raman spectroscopy.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Deterministic photon source interfaced with a programmable silicon-nitride integrated circuit
Authors:
Ying Wang,
Carlos F. D. Faurby,
Fabian Ruf,
Patrik I. Sund,
Kasper H. Nielsen,
Nicolas Volet,
Martijn J. R. Heck,
Nikolai Bart,
Andreas D. Wieck,
Arne Ludwig,
Leonardo Midolo,
Stefano Paesani,
Peter Lodahl
Abstract:
We develop a quantum photonic platform that interconnects a high-quality quantum dot single-photon source and a low-loss photonic integrated circuit made in silicon nitride. The platform is characterized and programmed to demonstrate various multiphoton applications, including bosonic suppression laws and photonic entanglement generation. The results show a promising technological route forward to…
▽ More
We develop a quantum photonic platform that interconnects a high-quality quantum dot single-photon source and a low-loss photonic integrated circuit made in silicon nitride. The platform is characterized and programmed to demonstrate various multiphoton applications, including bosonic suppression laws and photonic entanglement generation. The results show a promising technological route forward to scale-up photonic quantum hardware.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Dynamics and stability conditions of semiconductor lasers under external optical feedback from both sides of the laser cavity
Authors:
Mónica Far Brusatori,
Nicolas Volet
Abstract:
To increase the spectral efficiency of coherent communication systems, lasers with ever-narrower linewidths are required as they enable higher-order modulation formats with lower bit-error rates. In particular, semiconductor lasers are a key component due to their compactness, low power consumption, and potential for mass production. In field-testing scenarios their output is coupled to a fiber, m…
▽ More
To increase the spectral efficiency of coherent communication systems, lasers with ever-narrower linewidths are required as they enable higher-order modulation formats with lower bit-error rates. In particular, semiconductor lasers are a key component due to their compactness, low power consumption, and potential for mass production. In field-testing scenarios their output is coupled to a fiber, making them susceptible to external optical feedback (EOF). This has a detrimental effect on its stability, thus it is traditionally countered by employing, for example, optical isolators and angled output waveguides. In this work, EOF is explored in a novel way with the aim to reduce and stabilize the laser linewidth. EOF has been traditionally studied in the case where it is applied to only one side of the laser cavity. In contrast, this work gives a generalization to the case of feedback on both sides. It is implemented using photonic components available via generic foundry platforms, thus creating a path towards devices with high technology-readiness level. Numerical results shows an improvement in performance of the double-feedback case with respect to the single-feedback case. In particularly, by appropriately selecting the phase of the feedback from both sides, a broad stability regime is discovered. This work paves the way towards low-cost, integrated and stable narrow-linewidth integrated lasers.
△ Less
Submitted 27 December, 2021;
originally announced December 2021.
-
Refined method to extract frequency-noise components of lasers by delayed self-heterodyne
Authors:
Niklas Hedegaard Arent,
Mónica Brusatori Far,
Nicolas Volet
Abstract:
An essential metric to quantify the stability of a laser is its frequency noise (FN). This metric yields information on the linewidth and on noise components which limit its usage for high precision purposes such as coherent communication. Its experimental determination relies on challenging optical phase measurements, for which dedicated commercial instruments have been developed. In contrast, th…
▽ More
An essential metric to quantify the stability of a laser is its frequency noise (FN). This metric yields information on the linewidth and on noise components which limit its usage for high precision purposes such as coherent communication. Its experimental determination relies on challenging optical phase measurements, for which dedicated commercial instruments have been developed. In contrast, this work presents a simple and cost-effective method for extracting FN features employing a delayed self-heterodyne (DSH) setup. Using delay lengths much shorter than the coherence length of the laser, the DSH trace reveals a correspondence with the FN power spectral density (PSD) measured with commercial instruments. Results are found for multiple lasers, with discrepancies in intense dither tone frequencies below 0.2 percent
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
Efficient second harmonic generation in nanophotonic GaAs-on-insulator waveguides
Authors:
Eric J. Stanton,
Jeff Chiles,
Nima Nader,
Galan Moody,
Nicolas Volet,
Lin Chang,
John E. Bowers,
Sae Woo Nam,
Richard P. Mirin
Abstract:
Nonlinear frequency conversion plays a crucial role in advancing the functionality of next-generation optical systems. Portable metrology references and quantum networks will demand highly efficient second-order nonlinear devices, and the intense nonlinear interactions of nanophotonic waveguides can be leveraged to meet these requirements. Here we demonstrate second harmonic generation (SHG) in Ga…
▽ More
Nonlinear frequency conversion plays a crucial role in advancing the functionality of next-generation optical systems. Portable metrology references and quantum networks will demand highly efficient second-order nonlinear devices, and the intense nonlinear interactions of nanophotonic waveguides can be leveraged to meet these requirements. Here we demonstrate second harmonic generation (SHG) in GaAs-on-insulator waveguides with unprecedented efficiency of 40 W$^{-1}$ for a single-pass device. This result is achieved by minimizing the propagation loss and optimizing phase-matching. We investigate surface-state absorption and design the waveguide geometry for modal phase-matching with tolerance to fabrication variation. A 2.0 $μ$m pump is converted to a 1.0 $μ$m signal in a length of 2.9 mm with a wide signal bandwidth of 148 GHz. Tunable and efficient operation is demonstrated over a temperature range of 45 $^{\circ}$C with a slope of 0.24 nm/$^{\circ}$C. Wafer-bonding between GaAs and SiO$_2$ is optimized to minimize waveguide loss, and the devices are fabricated on 76 mm wafers with high uniformity. We expect this device to enable fully integrated self-referenced frequency combs and high-rate entangled photon pair generation.
△ Less
Submitted 14 February, 2020; v1 submitted 27 December, 2019;
originally announced December 2019.
-
Packaged photonic chip-based soliton microcomb using an ultralow-noise laser
Authors:
Arslan S. Raja,
Junqiu Liu,
Nicolas Volet,
Rui Ning Wang,
Jijun He,
Erwan Lucas,
Romain Bouchand,
Paul Morton,
John Bowers,
Tobias J. Kippenberg
Abstract:
Photonic chip-based soliton microcombs have shown rapid progress and have already been used in many system-level applications, including coherent communications, astrophysical spectrometer calibration and ultrafast ranging. While there has been substantial progress in realizing soliton microcombs that rely on compact laser diodes, culminating in devices that only utilize a semiconductor amplifier…
▽ More
Photonic chip-based soliton microcombs have shown rapid progress and have already been used in many system-level applications, including coherent communications, astrophysical spectrometer calibration and ultrafast ranging. While there has been substantial progress in realizing soliton microcombs that rely on compact laser diodes, culminating in devices that only utilize a semiconductor amplifier or a self-injection-locked laser as a pump source, accessing and generating single soliton states with electronically detectable line rates from a compact laser module has remained challenging. Here we demonstrate a current-initiated, $\mathrm{Si_3N_4}$ chip-based, 99-GHz soliton microcomb driven directly by an ultra-compact, low-noise laser. This approach does not require any fast laser tuning mechanism, and single soliton states can be accessed by changing the current of the laser diode. A simple, yet reliable, packaging technique has been developed to demonstrate the viability of such a microcomb system in field-deployable applications.
△ Less
Submitted 4 June, 2019;
originally announced June 2019.
-
Heterogeneously integrated GaAs waveguides on insulator for efficient frequency conversion
Authors:
Lin Chang,
Andreas Boes,
Xiaowen Guo,
Daryl T. Spencer,
MJ. Kennedy,
Jon D. Peters,
Nicolas Volet,
Jeff Chiles,
Abijith Kowligy,
Nima Nader,
Daniel D. Hickstein,
Eric J. Stanton,
Scott A. Diddams,
Scott B. Papp,
John E. Bowers
Abstract:
Tremendous scientific progress has been achieved through the development of nonlinear integrated photonics. Prominent examples are Kerr-frequency-comb generation in micro-resonators, and supercontinuum generation and frequency conversion in nonlinear photonic waveguides. High conversion efficiency is enabling for applications of nonlinear optics, including such broad directions as high-speed optic…
▽ More
Tremendous scientific progress has been achieved through the development of nonlinear integrated photonics. Prominent examples are Kerr-frequency-comb generation in micro-resonators, and supercontinuum generation and frequency conversion in nonlinear photonic waveguides. High conversion efficiency is enabling for applications of nonlinear optics, including such broad directions as high-speed optical signal processing, metrology, and quantum communication and computation. In this work, we demonstrate a gallium-arsenide-on-insulator (GaAs) platform for nonlinear photonics. GaAs has among the highest second- and third-order nonlinear optical coefficients, and use of a silica cladding results in waveguides with a large refractive index contrast and low propagation loss for expanded design of nonlinear processes. By harnessing these properties and develo** nanofabrication with GaAs, we report a record normalized second-harmonic efficiency of 13,000% W-1cm-2 at a fundamental wavelength of 2 um. This work paves the way for high performance nonlinear photonic integrated circuits (PICs), which not only can transition advanced functionalities outside the lab through fundamentally reduced power consumption and footprint, but also enables future optical sources and detectors.
△ Less
Submitted 29 May, 2018; v1 submitted 23 May, 2018;
originally announced May 2018.
-
Micro-resonator soliton generated directly with a diode laser
Authors:
Nicolas Volet,
Xu Yi,
Qi-Fan Yang,
Eric J. Stanton,
Paul A. Morton,
Ki Youl Yang,
Kerry J. Vahala,
John E. Bowers
Abstract:
An external-cavity diode laser is reported with ultralow noise, high power coupled to a fiber, and fast tunability. These characteristics enable the generation of an optical frequency comb in a silica micro-resonator with a single-soliton state. Neither an optical modulator nor an amplifier was used in the experiment. This demonstration greatly simplifies the soliton generation setup and represent…
▽ More
An external-cavity diode laser is reported with ultralow noise, high power coupled to a fiber, and fast tunability. These characteristics enable the generation of an optical frequency comb in a silica micro-resonator with a single-soliton state. Neither an optical modulator nor an amplifier was used in the experiment. This demonstration greatly simplifies the soliton generation setup and represents a significant step forward to a fully integrated soliton comb system.
△ Less
Submitted 16 November, 2017;
originally announced November 2017.
-
An Integrated-Photonics Optical-Frequency Synthesizer
Authors:
Daryl T. Spencer,
Tara Drake,
Travis C. Briles,
Jordan Stone,
Laura C. Sinclair,
Connor Fredrick,
Qing Li,
Daron Westly,
B. Robert Ilic,
Aaron Bluestone,
Nicolas Volet,
Tin Komljenovic,
Lin Chang,
Seung Hoon Lee,
Dong Yoon Oh,
Myoung-Gyun Suh,
Ki Youl Yang,
Martin H. P. Pfeiffer,
Tobias J. Kippenberg,
Erik Norberg,
Luke Theogarajan,
Kerry Vahala,
Nathan R. Newbury,
Kartik Srinivasan,
John E. Bowers
, et al. (2 additional authors not shown)
Abstract:
Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated…
▽ More
Integrated-photonics microchips now enable a range of advanced functionalities for high-coherence applications such as data transmission, highly optimized physical sensors, and harnessing quantum states, but with cost, efficiency, and portability much beyond tabletop experiments. Through high-volume semiconductor processing built around advanced materials there exists an opportunity for integrated devices to impact applications cutting across disciplines of basic science and technology. Here we show how to synthesize the absolute frequency of a lightwave signal, using integrated photonics to implement lasers, system interconnects, and nonlinear frequency comb generation. The laser frequency output of our synthesizer is programmed by a microwave clock across 4 THz near 1550 nm with 1 Hz resolution and traceability to the SI second. This is accomplished with a heterogeneously integrated III/V-Si tunable laser, which is guided by dual dissipative-Kerr-soliton frequency combs fabricated on silicon chips. Through out-of-loop measurements of the phase-coherent, microwave-to-optical link, we verify that the fractional-frequency instability of the integrated photonics synthesizer matches the $7.0*10^{-13}$ reference-clock instability for a 1 second acquisition, and constrain any synthesis error to $7.7*10^{-15}$ while step** the synthesizer across the telecommunication C band. Any application of an optical frequency source would be enabled by the precision optical synthesis presented here. Building on the ubiquitous capability in the microwave domain, our results demonstrate a first path to synthesis with integrated photonics, leveraging low-cost, low-power, and compact features that will be critical for its widespread use.
△ Less
Submitted 15 August, 2017;
originally announced August 2017.
