-
Large-Scale Bottom-Up Fabricated 3D Nonlinear Photonic Crystals
Authors:
Viola Valentina Vogler-Neuling,
Ülle-Linda Talts,
Rebecca Ferraro,
Helena Weigand,
Giovanni Finco,
Joel Winiger,
Peter Benedek,
Justine Kusch,
Artemios Karvounis,
Vanessa Wood,
Jürg Leuthold,
Rachel Grange
Abstract:
Nonlinear optical effects are used to generate coherent light at wavelengths difficult to reach with lasers. Materials periodically poled or nanostructured in the nonlinear susceptibility in three spatial directions are called 3D nonlinear photonic crystals (NPhCs). They enable enhanced nonlinear optical conversion efficiencies, emission control, and simultaneous generation of nonlinear wavelength…
▽ More
Nonlinear optical effects are used to generate coherent light at wavelengths difficult to reach with lasers. Materials periodically poled or nanostructured in the nonlinear susceptibility in three spatial directions are called 3D nonlinear photonic crystals (NPhCs). They enable enhanced nonlinear optical conversion efficiencies, emission control, and simultaneous generation of nonlinear wavelengths. The chemical inertness of efficient second-order nonlinear materials ($χ^{(2)}$) prohibited their nanofabrication until 2018. The current method is restricted to top-down laser-based techniques limiting the periodicity along z-axis to 10 um. We demonstrate the first bottom-up fabricated 3D NPhC in sol-gel derived barium titanate by soft-nanoimprint lithography: a woodpile with eight layers and periodicities of 1 um (xy-plane) and 300 nm (z-plane). The surface areas exceed $5.3\cdot 10^4$ um^2, which is two orders of magnitude larger than the state-of-the-art. This study is expected to initiate bottom-up fabrication of 3D NPhCs with a supremely strong and versatile nonlinear response.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
Sol-gel Barium Titanate Nanohole Array as a Nonlinear Metasurface and a Photonic Crystal
Authors:
Ülle-Linda Talts,
Helena C. Weigand,
Grégoire Saerens,
Peter Benedek,
Joel Winiger,
Vanessa Wood,
Jürg Leuthold,
Viola Vogler-Neuling,
Rachel Grange
Abstract:
The quest of a nonlinear optical material that can be easily nanostructured over a large surface area is still ongoing. Here, we demonstrate a nanoimprinted nonlinear barium titanate 2D nanohole array that shows optical properties of a 2D photonic crystal and metasurface, depending on the direction of the optical axis. The challenge of nanostructuring the inert metal-oxide is resolved by direct so…
▽ More
The quest of a nonlinear optical material that can be easily nanostructured over a large surface area is still ongoing. Here, we demonstrate a nanoimprinted nonlinear barium titanate 2D nanohole array that shows optical properties of a 2D photonic crystal and metasurface, depending on the direction of the optical axis. The challenge of nanostructuring the inert metal-oxide is resolved by direct soft nanoimprint lithography with sol-gel derived barium titanate enabling critical dimensions of 120 nm with aspect ratios of 5. The nanohole array exhibits a photonic bandgap in the infrared range when probed along the slab axis while lattice resonant states are observed in out-of-plane transmission configuration. The enhanced light-matter interaction from the resonant structure enables to increase the second-harmonic generation in the near-UV by a factor of 18 illustrating the potential in the flexible fabrication technique for barium titanate photonic devices.
△ Less
Submitted 21 July, 2023;
originally announced July 2023.
-
Second-harmonic generation tuning by stretching arrays of GaAs nanowires
Authors:
Grégoire Saerens,
Esther Bloch,
Kristina Frizyuk,
Olga Sergaeva,
Viola V. Vogler-Neuling,
Elizaveta Semenova,
Elizaveta Lebedkina,
Mihail Petrov,
Rachel Grange,
Maria Timofeeva
Abstract:
We present a wearable device with III-V nanowires in a flexible polymer, which is used for active mechanical tuning of the second-harmonic generation intensity. An array of vertical GaAs nanowires was grown with metalorganic vapour-phase epitaxy, then embedded in polydimethylsiloxane and detached from the rigid substrate with mechanical peel off. Experimental results show a tunability of the secon…
▽ More
We present a wearable device with III-V nanowires in a flexible polymer, which is used for active mechanical tuning of the second-harmonic generation intensity. An array of vertical GaAs nanowires was grown with metalorganic vapour-phase epitaxy, then embedded in polydimethylsiloxane and detached from the rigid substrate with mechanical peel off. Experimental results show a tunability of the second-harmonic generation intensity by a factor of two for 30% stretching which matches the simulations including the distribution of sizes. We studied the impact of different parameters on the band dispersion and tunability of the second-harmonic generation, such as the pitch, the length, and the diameter. We predict at least three orders of magnitude active mechanical tuning of the nonlinear signal intensity for nanowire arrays. The flexibility of the array together with the resonant wavelength engineering make such structures perspective platforms for future bendable or stretchable nanophotonic devices as light sources or sensors.
△ Less
Submitted 27 January, 2022;
originally announced January 2022.
-
Enhanced electro-optic modulation in resonant metasurfaces of lithium niobate
Authors:
Helena Weigand,
Viola V. Vogler-Neuling,
Marc Reig Escalé,
David Pohl,
Felix Richter,
Artemios Karvounis,
Flavia Timpu,
Rachel Grange
Abstract:
In display technologies or data processing, planar and subwavelength free-space components suited for flat photonic devices are needed. Metasurfaces, which shape the optical wavefront within hundreds of nanometers, can provide a solution for thin and portable photonic devices, e.g. as CMOS-compatible modules. While conventional electro-optic modulators are inconvenient to operate in free space con…
▽ More
In display technologies or data processing, planar and subwavelength free-space components suited for flat photonic devices are needed. Metasurfaces, which shape the optical wavefront within hundreds of nanometers, can provide a solution for thin and portable photonic devices, e.g. as CMOS-compatible modules. While conventional electro-optic modulators are inconvenient to operate in free space configurations, its principle can largely be applied to the development of active metasurfaces with the prospect of modulation speeds up to the GHz region. Here, we use this concept to realize fast and continuous modulation of light at low voltage and MHz speed with a lithium niobate metasurface tuned by the linear electro-optic effect. Furthermore, we exploit the resonance in the visible to enhance the modulation of the transmitted light by two orders of magnitude, namely by a factor of 80, compared to the unstructured substrate. This proof-of-concept work is a first important step towards the use of lithium niobate metasurfaces for free space modulation.
△ Less
Submitted 21 July, 2021; v1 submitted 23 June, 2021;
originally announced June 2021.