Showing 51–100 of 118 results for author: Viswanathan, V

Cell-Level State of Charge Estimation for Battery Packs Under Minimal Sensing

Authors: Dong Zhang, Luis D. Couto, Ross Drummond, Shashank Sripad, Venkatasubramanian Viswanathan

Abstract: This manuscript presents an algorithm for individual Lithium-ion (Li-ion) battery cell state of charge (SOC) estimation in a large-scale battery pack under minimal sensing, where only pack-level voltage and current are measured. For battery packs consisting of up to thousands of cells in electric vehicle or stationary energy storage applications, it is desirable to estimate individual cell SOCs wi… ▽ More This manuscript presents an algorithm for individual Lithium-ion (Li-ion) battery cell state of charge (SOC) estimation in a large-scale battery pack under minimal sensing, where only pack-level voltage and current are measured. For battery packs consisting of up to thousands of cells in electric vehicle or stationary energy storage applications, it is desirable to estimate individual cell SOCs without cell local measurements in order to reduce sensing costs. Mathematically, pure series connected cells yield dynamics given by ordinary differential equations under classical full voltage sensing. In contrast, parallel--series connected battery packs are evidently more challenging because the dynamics are governed by a nonlinear differential--algebraic equations (DAE) system. The majority of the conventional studies on SOC estimation for battery packs benefit from idealizing the pack as a lumped single cell which ultimately lose track of cell-level conditions and are blind to potential risks of cell-level over-charge and over-discharge. This work explicitly models a battery pack with high fidelity cell-by-cell resolution based on the interconnection of single cell models, and examines the observability of cell-level state with only pack-level measurements. A DAE-based state observer with linear output error injection is formulated, where the individual cell SOC and current can be reconstructed from minimal number of pack sensing. The mathematically guaranteed asymptotic convergence of differential and algebraic state estimates is established by considering local Lipschitz continuity property of system nonlinearities. Simulation results for Graphite/NMC cells illustrate convergence for cell SOCs, currents, and voltages. △ Less

Submitted 16 September, 2021; originally announced September 2021.

Differentiable Physics: A Position Piece

Authors: Bharath Ramsundar, Dilip Krishnamurthy, Venkatasubramanian Viswanathan

Abstract: Differentiable physics provides a new approach for modeling and understanding the physical systems by pairing the new technology of differentiable programming with classical numerical methods for physical simulation. We survey the rapidly growing literature of differentiable physics techniques and highlight methods for parameter estimation, learning representations, solving differential equations,… ▽ More Differentiable physics provides a new approach for modeling and understanding the physical systems by pairing the new technology of differentiable programming with classical numerical methods for physical simulation. We survey the rapidly growing literature of differentiable physics techniques and highlight methods for parameter estimation, learning representations, solving differential equations, and develo** what we call scientific foundation models using data and inductive priors. We argue that differentiable physics offers a new paradigm for modeling physical phenomena by combining classical analytic solutions with numerical methodology using the bridge of differentiable programming. △ Less

Submitted 14 September, 2021; originally announced September 2021.

Comments: 12 pages, 1 figure

Principles of the Battery Data Genome

Authors: Logan Ward, Susan Babinec, Eric J. Dufek, David A. Howey, Venkatasubramanian Viswanathan, Muratahan Aykol, David A. C. Beck, Ben Blaiszik, Bor-Rong Chen, George Crabtree, Valerio de Angelis, Philipp Dechent, Matthieu Dubarry, Erica E. Eggleton, Donal P. Finegan, Ian Foster, Chirranjeevi Gopal, Patrick Herring, Victor W. Hu, Noah H. Paulson, Yuliya Preger, Dirk Uwe Sauer, Kandler Smith, Seth Snyder, Shashank Sripad , et al. (2 additional authors not shown)

Abstract: Electrochemical energy storage is central to modern society -- from consumer electronics to electrified transportation and the power grid. It is no longer just a convenience but a critical enabler of the transition to a resilient, low-carbon economy. The large pluralistic battery research and development community serving these needs has evolved into diverse specialties spanning materials discover… ▽ More Electrochemical energy storage is central to modern society -- from consumer electronics to electrified transportation and the power grid. It is no longer just a convenience but a critical enabler of the transition to a resilient, low-carbon economy. The large pluralistic battery research and development community serving these needs has evolved into diverse specialties spanning materials discovery, battery chemistry, design innovation, scale-up, manufacturing and deployment. Despite the maturity and the impact of battery science and technology, the data and software practices among these disparate groups are far behind the state-of-the-art in other fields (e.g. drug discovery), which have enjoyed significant increases in the rate of innovation. Incremental performance gains and lost research productivity, which are the consequences, retard innovation and societal progress. Examples span every field of battery research , from the slow and iterative nature of materials discovery, to the repeated and time-consuming performance testing of cells and the mitigation of degradation and failures. The fundamental issue is that modern data science methods require large amounts of data and the battery community lacks the requisite scalable, standardized data hubs required for immediate use of these approaches. Lack of uniform data practices is a central barrier to the scale problem. In this perspective we identify the data- and software-sharing gaps and propose the unifying principles and tools needed to build a robust community of data hubs, which provide flexible sharing formats to address diverse needs. The Battery Data Genome is offered as a data-centric initiative that will enable the transformative acceleration of battery science and technology, and will ultimately serve as a catalyst to revolutionize our approach to innovation. △ Less

Submitted 3 December, 2021; v1 submitted 14 September, 2021; originally announced September 2021.

Comments: corrected author list

Model Explanations via the Axiomatic Causal Lens

Authors: Gagan Biradar, Vignesh Viswanathan, Yair Zick

Abstract: Explaining the decisions of black-box models is a central theme in the study of trustworthy ML. Numerous measures have been proposed in the literature; however, none of them take an axiomatic approach to causal explainability. In this work, we propose three explanation measures which aggregate the set of all but-for causes -- a necessary and sufficient explanation -- into feature importance weight… ▽ More Explaining the decisions of black-box models is a central theme in the study of trustworthy ML. Numerous measures have been proposed in the literature; however, none of them take an axiomatic approach to causal explainability. In this work, we propose three explanation measures which aggregate the set of all but-for causes -- a necessary and sufficient explanation -- into feature importance weights. Our first measure is a natural adaptation of Chockler and Halpern's notion of causal responsibility, whereas the other two correspond to existing game-theoretic influence measures. We present an axiomatic treatment for our proposed indices, showing that they can be uniquely characterized by a set of desirable properties. We also extend our approach to derive a new method to compute the Shapley-Shubik and Banzhaf indices for black-box model explanations. Finally, we analyze and compare the necessity and sufficiency of all our proposed explanation measures in practice using the Adult-Income dataset. Thus, our work is the first to formally bridge the gap between model explanations, game-theoretic influence, and causal analysis. △ Less

Submitted 15 February, 2024; v1 submitted 8 September, 2021; originally announced September 2021.

Comments: Withdrawing because this paper was re-written and resubmitted at arXiv:2310.03131. Please see arXiv:2310.03131 for the most recent version of this work

Chemomechanics: friend or foe of the "AND problem" of solid-state batteries?

Authors: Zeeshan Ahmad, Victor Venturi, Shashank Sripad, Venkatasubramanian Viswanathan

Abstract: Solid electrolytes are widely considered as the enabler of lithium metal anodes for safe, durable, and high energy density rechargeable lithium-ion batteries. Despite the promise, failure mechanisms associated with solid-state batteries are not well-established, largely due to limited understanding of the chemomechanical factors governing them. We focus on the recent developments in understanding… ▽ More Solid electrolytes are widely considered as the enabler of lithium metal anodes for safe, durable, and high energy density rechargeable lithium-ion batteries. Despite the promise, failure mechanisms associated with solid-state batteries are not well-established, largely due to limited understanding of the chemomechanical factors governing them. We focus on the recent developments in understanding solid-state aspects including the effects of mechanical stresses, constitutive relations, fracture, and void formation, and outline the gaps in the literature. We also provide an overview of the manufacturing and processing of solid-state batteries in relation to chemomechanics. The gaps identified provide concrete directions towards the rational design and development of failure-resistant solid-state batteries. △ Less

Submitted 27 March, 2022; v1 submitted 19 August, 2021; originally announced August 2021.

Comments: 49 pages, 10 figures

Rotation Equivariant Operators for Machine Learning on Scalar and Vector Fields

Authors: Paul Shen, Michael Herbst, Venkat Viswanathan

Abstract: We develop theory and software for rotation equivariant operators on scalar and vector fields, with diverse applications in simulation, optimization and machine learning. Rotation equivariance (covariance) means all fields in the system rotate together, implying spatially invariant dynamics that preserve symmetry. Extending the convolution theorems of linear time invariant systems, we theorize tha… ▽ More We develop theory and software for rotation equivariant operators on scalar and vector fields, with diverse applications in simulation, optimization and machine learning. Rotation equivariance (covariance) means all fields in the system rotate together, implying spatially invariant dynamics that preserve symmetry. Extending the convolution theorems of linear time invariant systems, we theorize that linear equivariant operators are characterized by tensor field convolutions using an appropriate product between the input field and a radially symmetric kernel field. Most Green's functions and differential operators are in fact equivariant operators, which can also fit unknown symmetry preserving dynamics by parameterizing the radial function. We implement the Julia package EquivariantOperators.jl for fully differentiable finite difference equivariant operators on scalar, vector and higher order tensor fields in 2d/3d. It can run forwards for simulation or image processing, or be back propagated for computer vision, inverse problems and optimal control. Code at https://aced-differentiate.github.io/EquivariantOperators.jl/ △ Less

Submitted 4 August, 2022; v1 submitted 21 August, 2021; originally announced August 2021.

Tunable electrochemistry with moiré flat bands and topological defects at twisted bilayer graphene

Authors: Yun Yu, Kaidi Zhang, Holden Parks, Mohammad Babar, Stephen Carr, Isaac M. Craig, Madeline Van Winkle, Artur Lyssenko, Takashi Taniguchi, Kenji Watanabe, Venkatasubramanian Viswanathan, D. Kwabena Bediako

Abstract: Tailoring electron transfer dynamics across solid-liquid interfaces is fundamental to the interconversion of electrical and chemical energy. Stacking atomically thin layers with a very small azimuthal misorientation to produce moiré superlattices enables the controlled engineering of electronic band structures and the formation of extremely flat electronic bands. Here, we report a strong twist ang… ▽ More Tailoring electron transfer dynamics across solid-liquid interfaces is fundamental to the interconversion of electrical and chemical energy. Stacking atomically thin layers with a very small azimuthal misorientation to produce moiré superlattices enables the controlled engineering of electronic band structures and the formation of extremely flat electronic bands. Here, we report a strong twist angle dependence of heterogeneous charge transfer kinetics at twisted bilayer graphene electrodes with the greatest enhancement observed near the 'magic angle' (~1.1 degrees). This effect is driven by the angle-dependent tuning of moiré-derived flat bands that modulate electron transfer processes with the solution-phase redox couple. Combined experimental and computational analysis reveals that the variation in electrochemical activity with moiré angle is controlled by atomic reconstruction of the moiré superlattice at twist angles <2 degrees, and topological defect AA stacking regions produce a large anomalous local electrochemical enhancement that cannot be accounted for by the elevated local density of states alone. Our results introduce moiré flat band materials as a distinctively tunable paradigm for mediating electrochemical transformations. △ Less

Submitted 15 August, 2021; originally announced August 2021.

Comments: 21 pages, 5 figures

Journal ref: Nature Chemistry (2022)

Rethinking End-to-End Evaluation of Decomposable Tasks: A Case Study on Spoken Language Understanding

Authors: Siddhant Arora, Alissa Ostapenko, Vijay Viswanathan, Siddharth Dalmia, Florian Metze, Shinji Watanabe, Alan W Black

Abstract: Decomposable tasks are complex and comprise of a hierarchy of sub-tasks. Spoken intent prediction, for example, combines automatic speech recognition and natural language understanding. Existing benchmarks, however, typically hold out examples for only the surface-level sub-task. As a result, models with similar performance on these benchmarks may have unobserved performance differences on the oth… ▽ More Decomposable tasks are complex and comprise of a hierarchy of sub-tasks. Spoken intent prediction, for example, combines automatic speech recognition and natural language understanding. Existing benchmarks, however, typically hold out examples for only the surface-level sub-task. As a result, models with similar performance on these benchmarks may have unobserved performance differences on the other sub-tasks. To allow insightful comparisons between competitive end-to-end architectures, we propose a framework to construct robust test sets using coordinate ascent over sub-task specific utility functions. Given a dataset for a decomposable task, our method optimally creates a test set for each sub-task to individually assess sub-components of the end-to-end model. Using spoken language understanding as a case study, we generate new splits for the Fluent Speech Commands and Snips SmartLights datasets. Each split has two test sets: one with held-out utterances assessing natural language understanding abilities, and one with held-out speakers to test speech processing skills. Our splits identify performance gaps up to 10% between end-to-end systems that were within 1% of each other on the original test sets. These performance gaps allow more realistic and actionable comparisons between different architectures, driving future model development. We release our splits and tools for the community. △ Less

Submitted 28 June, 2021; originally announced June 2021.

Comments: INTERSPEECH 2021

The promise of energy-efficient battery-powered urban aircraft

Authors: Shashank Sripad, Venkatasubramanian Viswanathan

Abstract: Improvements in rechargeable batteries are enabling several electric urban air mobility (UAM) aircraft designs with up to 300 miles of range with payload equivalents of up to 7 passengers. We find that novel UAM aircraft consume between 130 Wh/passenger-mile up to ~1,200 Wh/passenger-mile depending on the design and utilization, relative to an expected consumption of over 220 Wh/passenger-mi for t… ▽ More Improvements in rechargeable batteries are enabling several electric urban air mobility (UAM) aircraft designs with up to 300 miles of range with payload equivalents of up to 7 passengers. We find that novel UAM aircraft consume between 130 Wh/passenger-mile up to ~1,200 Wh/passenger-mile depending on the design and utilization, relative to an expected consumption of over 220 Wh/passenger-mi for terrestrial electric vehicles and 1,000 Wh/passenger-mile for combustion engine vehicles. We also find that several UAM aircraft designs are approaching technological viability with current Li-ion batteries, based on the specific power-and-energy while rechargeability and lifetime performance remain uncertain. These aspects highlight the technological readiness of a new segment of transportation. △ Less

Submitted 16 June, 2021; originally announced June 2021.

Comments: 3 pages, 2 figures, 1 supplementary information file

Journal ref: Proceedings of the National Academy of Sciences, 2021 118 (45) e2111164118

CitationIE: Leveraging the Citation Graph for Scientific Information Extraction

Authors: Vijay Viswanathan, Graham Neubig, Pengfei Liu

Abstract: Automatically extracting key information from scientific documents has the potential to help scientists work more efficiently and accelerate the pace of scientific progress. Prior work has considered extracting document-level entity clusters and relations end-to-end from raw scientific text, which can improve literature search and help identify methods and materials for a given problem. Despite th… ▽ More Automatically extracting key information from scientific documents has the potential to help scientists work more efficiently and accelerate the pace of scientific progress. Prior work has considered extracting document-level entity clusters and relations end-to-end from raw scientific text, which can improve literature search and help identify methods and materials for a given problem. Despite the importance of this task, most existing works on scientific information extraction (SciIE) consider extraction solely based on the content of an individual paper, without considering the paper's place in the broader literature. In contrast to prior work, we augment our text representations by leveraging a complementary source of document context: the citation graph of referential links between citing and cited papers. On a test set of English-language scientific documents, we show that simple ways of utilizing the structure and content of the citation graph can each lead to significant gains in different scientific information extraction tasks. When these tasks are combined, we observe a sizable improvement in end-to-end information extraction over the state-of-the-art, suggesting the potential for future work along this direction. We release software tools to facilitate citation-aware SciIE development. △ Less

Submitted 2 June, 2021; originally announced June 2021.

Comments: ACL-IJCNLP 2021 camera-ready (long paper in main conference)

DSLR: Dynamic to Static LiDAR Scan Reconstruction Using Adversarially Trained Autoencoder

Authors: Prashant Kumar, Sabyasachi Sahoo, Vanshil Shah, Vineetha Kondameedi, Abhinav Jain, Akshaj Verma, Chiranjib Bhattacharyya, Vinay Viswanathan

Abstract: Accurate reconstruction of static environments from LiDAR scans of scenes containing dynamic objects, which we refer to as Dynamic to Static Translation (DST), is an important area of research in Autonomous Navigation. This problem has been recently explored for visual SLAM, but to the best of our knowledge no work has been attempted to address DST for LiDAR scans. The problem is of critical impor… ▽ More Accurate reconstruction of static environments from LiDAR scans of scenes containing dynamic objects, which we refer to as Dynamic to Static Translation (DST), is an important area of research in Autonomous Navigation. This problem has been recently explored for visual SLAM, but to the best of our knowledge no work has been attempted to address DST for LiDAR scans. The problem is of critical importance due to wide-spread adoption of LiDAR in Autonomous Vehicles. We show that state-of the art methods developed for the visual domain when adapted for LiDAR scans perform poorly. We develop DSLR, a deep generative model which learns a map** between dynamic scan to its static counterpart through an adversarially trained autoencoder. Our model yields the first solution for DST on LiDAR that generates static scans without using explicit segmentation labels. DSLR cannot always be applied to real world data due to lack of paired dynamic-static scans. Using Unsupervised Domain Adaptation, we propose DSLR-UDA for transfer to real world data and experimentally show that this performs well in real world settings. Additionally, if segmentation information is available, we extend DSLR to DSLR-Seg to further improve the reconstruction quality. DSLR gives the state of the art performance on simulated and real-world datasets and also shows at least 4x improvement. We show that DSLR, unlike the existing baselines, is a practically viable model with its reconstruction quality within the tolerable limits for tasks pertaining to autonomous navigation like SLAM in dynamic environments. △ Less

Submitted 26 May, 2021; originally announced May 2021.

Comments: 17 pages, 15 figures, Accepted at AAAI 2021

Thermodynamics of Lithium Strip** and Limits for Fast Discharge in Lithium Metal Batteries

Authors: Victor Venturi, Venkatasubramanian Viswanathan

Abstract: Lithium metal batteries are seen as a critical piece towards electrifying aviation. During charging, plating of lithium metal, a critical failure mechanism, has been studied and mitigation strategies have been proposed. For electric aircraft, high discharge power requirements necessitate strip** of lithium metal in an uniform way and recent studies have identified the evolution of surface voids… ▽ More Lithium metal batteries are seen as a critical piece towards electrifying aviation. During charging, plating of lithium metal, a critical failure mechanism, has been studied and mitigation strategies have been proposed. For electric aircraft, high discharge power requirements necessitate strip** of lithium metal in an uniform way and recent studies have identified the evolution of surface voids and pits as a potential failure mechanism. In this work, using density functional theory calculations and thermodynamic analysis, we investigate the discharge process on lithium metal surfaces. In particular, we calculate the tendency for vacancy congregation on lithium metal surfaces, which constitutes the first step in the formation of voids and pits. We find that among the low Miller index surfaces, the (111) surface is the least likely to exhibit pitting issues. Our analysis suggests that faceting control during electrodeposition could be a key pathway towards simultaneously enabling both fast charge and fast discharge. △ Less

Submitted 11 February, 2021; originally announced March 2021.

The Price is (Probably) Right: Learning Market Equilibria from Samples

Authors: Vignesh Viswanathan, Omer Lev, Neel Patel, Yair Zick

Abstract: Equilibrium computation in markets usually considers settings where player valuation functions are known. We consider the setting where player valuations are unknown; using a PAC learning-theoretic framework, we analyze some classes of common valuation functions, and provide algorithms which output direct PAC equilibrium allocations, not estimates based on attempting to learn valuation functions.… ▽ More Equilibrium computation in markets usually considers settings where player valuation functions are known. We consider the setting where player valuations are unknown; using a PAC learning-theoretic framework, we analyze some classes of common valuation functions, and provide algorithms which output direct PAC equilibrium allocations, not estimates based on attempting to learn valuation functions. Since there exist trivial PAC market outcomes with an unbounded worst-case efficiency loss, we lower-bound the efficiency of our algorithms. While the efficiency loss under general distributions is rather high, we show that in some cases (e.g., unit-demand valuations), it is possible to find a PAC market equilibrium with significantly better utility. △ Less

Submitted 9 September, 2021; v1 submitted 29 December, 2020; originally announced December 2020.

AutoMat: Accelerated Computational Electrochemical systems Discovery

Authors: Emil Annevelink, Rachel Kurchin, Eric Muckley, Lance Kavalsky, Vinay I. Hegde, Valentin Sulzer, Shang Zhu, Jiankun Pu, David Farina, Matthew Johnson, Dhairya Gandhi, Adarsh Dave, Hongyi Lin, Alan Edelman, Bharath Ramsundar, James Saal, Christopher Rackauckas, Viral Shah, Bryce Meredig, Venkatasubramanian Viswanathan

Abstract: Large-scale electrification is vital to addressing the climate crisis, but several scientific and technological challenges remain to fully electrify both the chemical industry and transportation. In both of these areas, new electrochemical materials will be critical, but their development currently relies heavily on human-time-intensive experimental trial and error and computationally expensive fi… ▽ More Large-scale electrification is vital to addressing the climate crisis, but several scientific and technological challenges remain to fully electrify both the chemical industry and transportation. In both of these areas, new electrochemical materials will be critical, but their development currently relies heavily on human-time-intensive experimental trial and error and computationally expensive first-principles, meso-scale and continuum simulations. We present an automated workflow, AutoMat, that accelerates these computational steps by introducing both automated input generation and management of simulations across scales from first principles to continuum device modeling. Furthermore, we show how to seamlessly integrate multi-fidelity predictions such as machine learning surrogates or automated robotic experiments "in-the-loop". The automated framework is implemented with design space search techniques to dramatically accelerate the overall materials discovery pipeline by implicitly learning design features that optimize device performance across several metrics. We discuss the benefits of AutoMat using examples in electrocatalysis and energy storage and highlight lessons learned. △ Less

Submitted 13 May, 2022; v1 submitted 3 November, 2020; originally announced November 2020.

Comments: v1-3:4 pages, 1 figure, accepted to NeurIPS Climate Change and AI Workshop 2020, updating acknowledgements and citations v4: substantially updated content and author list, accepted to MRS Bulletin

Interfacial Effects on Solid Electrolyte Interphase in Lithium-ion Batteries

Authors: Zeeshan Ahmad, Victor Venturi, Hasnain Hafiz, Venkatasubramanian Viswanathan

Abstract: The existence of passivating layers at the interfaces is a major factor enabling modern lithium-ion (Li-ion) batteries. Their properties determine the cycle life, performance, and safety of batteries. A special case is the solid electrolyte interphase (SEI), a heterogeneous multi-component film formed due to the instability and subsequent decomposition of the electrolyte at the surface of the anod… ▽ More The existence of passivating layers at the interfaces is a major factor enabling modern lithium-ion (Li-ion) batteries. Their properties determine the cycle life, performance, and safety of batteries. A special case is the solid electrolyte interphase (SEI), a heterogeneous multi-component film formed due to the instability and subsequent decomposition of the electrolyte at the surface of the anode. The SEI acts as a passivating layer that hinders further electrolyte disintegration, which is detrimental to the Coulombic efficiency. In this work, we use first-principles simulations to investigate the kinetic and electronic properties of the interface between lithium fluoride (LiF) and lithium carbonate (Li$_2$CO$_3$), two common SEI components present in Li-ion batteries with organic liquid electrolytes. We find a coherent interface between these components that restricts the strain in each of them to below 3%. We find that the interface causes a large increase in the formation energy of the Frenkel defect, generating Li vacancies in LiF and Li interstitials in Li$_2$CO$_3$ responsible for transport. On the other hand, the Li interstitial hop** barrier is reduced from $0.3$ eV in bulk Li$_2$CO$_3$ to $0.10$ or $0.22$ eV in the interfacial structure considered, demonstrating the favorable role of the interface. Controlling these two effects in a heterogeneous SEI is crucial for maintaining fast ion transport in the SEI. We further perform Car-Parrinello molecular dynamics simulations to explore Li ion conduction in our interfacial structure, which reveal an enhanced Li ion diffusion in the vicinity of the interface. Understanding the interfacial properties of the multiphase SEI represents an important frontier to enable next-generation batteries. △ Less

Submitted 4 December, 2020; v1 submitted 26 October, 2020; originally announced October 2020.

Comments: 24 + 6 + 1 pages, 7 figures, 6 pages of Supporting Information. v2: more detailed explanation of defective structure, added references etc

Journal ref: J. Phys. Chem. C 125, 11301 (2021)

MeltNet: Predicting alloy melting temperature by machine learning

Authors: Pin-Wen Guan, Venkatasubramanian Viswanathan

Abstract: Thermodynamics is fundamental for understanding and synthesizing multi-component materials, while efficient and accurate prediction of it still remain urgent and challenging. As a demonstration of the "Divide and conquer" strategy decomposing a phase diagram into different learnable features, quantitative prediction of melting temperature of binary alloys is made by constructing the machine learni… ▽ More Thermodynamics is fundamental for understanding and synthesizing multi-component materials, while efficient and accurate prediction of it still remain urgent and challenging. As a demonstration of the "Divide and conquer" strategy decomposing a phase diagram into different learnable features, quantitative prediction of melting temperature of binary alloys is made by constructing the machine learning (ML) model "MeltNet" in the present work. The influences of model hyperparameters on the prediction accuracy is systematically studied, and the optimal hyperparameters are obtained by Bayesian optimization. A comprehensive error analysis is made on various aspects including training duration, chemistry and input features. It is found that except a few discrepancies mainly caused by less satisfactory treatment of metalloid/semimetal elements and large melting point difference with poor liquid mixing ability between constituent elements, MeltNet achieves overall success in prediction, especially capturing subtle composition-dependent features in the unseen chemical systems for the first time. The reliability, robustness and accuracy of MeltNet is further largely boosted by introducing the ensemble method with uncertainty quantification. Based on the state-of-the-art underlying techniques, MeltNet achieves a prediction mean average error (MAE) as low as about 120 K, at a minimal computational cost. We believe the present work has a general value for significant acceleration of predicting thermodynamics of complicated multi-component systems. △ Less

Submitted 27 October, 2020; originally announced October 2020.

Next-Generation Geodesy at the Lunar South Pole: An Opportunity Enabled by the Artemis III Crew

Authors: Vishnu Viswanathan, Erwan Mazarico, Stephen Merkowitz, Xiaoli Sun, Thomas Marshall Eubanks, David Edmund Smith

Abstract: Lunar retro-reflector arrays (LRAs) consisting of corner-cube reflectors (CCRs) placed on the nearside of the Moon during the Apollo era have demonstrated their longevity, cost-effectiveness, ease of deployment, and most importantly their interdisciplinary scientific impact through the ongoing lunar laser ranging (LLR) experiment. The human exploration of the lunar south polar region provides a un… ▽ More Lunar retro-reflector arrays (LRAs) consisting of corner-cube reflectors (CCRs) placed on the nearside of the Moon during the Apollo era have demonstrated their longevity, cost-effectiveness, ease of deployment, and most importantly their interdisciplinary scientific impact through the ongoing lunar laser ranging (LLR) experiment. The human exploration of the lunar south polar region provides a unique opportunity to build on this legacy and contribute to the scientific return of the Artemis, for many decades to come. Here we outline the extended science objectives realizable with the deployment of geodetic tracking devices by the Artemis III crew. △ Less

Submitted 8 September, 2020; originally announced September 2020.

Comments: 2 pages, 1 figure, A white paper submitted to the Artemis III Science Definition Team of NASA's Science Mission Directorate

Extending Science from Lunar Laser Ranging

Authors: Vishnu Viswanathan, Erwan Mazarico, Stephen Merkowitz, James G. Williams, Slava G. Turyshev, Douglas G. Currie, Anton I. Ermakov, Nicolas Rambaux, Agnès Fienga, Clément Courde, Julien Chabé, Jean-Marie Torre, Adrien Bourgoin, Ulrich Schreiber, Thomas M. Eubanks, Chensheng Wu, Daniele Dequal, Simone Dell'Agnello, Liliane Biskupek, Jürgen Müller, Sergei Kopeikin

Abstract: The Lunar Laser Ranging (LLR) experiment has accumulated 50 years of range data of improving accuracy from ground stations to the laser retroreflector arrays (LRAs) on the lunar surface. The upcoming decade offers several opportunities to break new ground in data precision through the deployment of the next generation of single corner-cube lunar retroreflectors and active laser transponders. This… ▽ More The Lunar Laser Ranging (LLR) experiment has accumulated 50 years of range data of improving accuracy from ground stations to the laser retroreflector arrays (LRAs) on the lunar surface. The upcoming decade offers several opportunities to break new ground in data precision through the deployment of the next generation of single corner-cube lunar retroreflectors and active laser transponders. This is likely to expand the LLR station network. Lunar dynamical models and analysis tools have the potential to improve and fully exploit the long temporal baseline and precision allowed by millimetric LLR data. Some of the model limitations are outlined for future efforts. Differential observation techniques will help mitigate some of the primary limiting factors and reach unprecedented accuracy. Such observations and techniques may enable the detection of several subtle signatures required to understand the dynamics of the Earth-Moon system and the deep lunar interior. LLR model improvements would impact multi-disciplinary fields that include lunar and planetary science, Earth science, fundamental physics, celestial mechanics and ephemerides. △ Less

Submitted 21 August, 2020; originally announced August 2020.

Comments: 8 pages, 1 figure, A white paper submitted to the Committee on the Planetary Science Decadal Survey (2023-2032) of The National Academies of Sciences

Report number: NTRS-ID:20205004484

Journal ref: Bulletin of the AAS (2021), 53(4)

Closed-Loop Design of Proton Donors for Lithium-Mediated Ammonia Synthesis with Interpretable Models and Molecular Machine Learning

Authors: Dilip Krishnamurthy, Nikifar Lazouski, Michal L. Gala, Karthish Manthiram, Venkatasubramanian Viswanathan

Abstract: In this work, we experimentally determined the efficacy of several classes of proton donors for lithium-mediated electrochemical nitrogen reduction in a tetrahydrofuran-based electrolyte, an attractive alternative method for producing ammonia. We then built an interpretable data-driven classification model which identified solvatochromic Kamlet-Taft parameters as important for distinguishing betwe… ▽ More In this work, we experimentally determined the efficacy of several classes of proton donors for lithium-mediated electrochemical nitrogen reduction in a tetrahydrofuran-based electrolyte, an attractive alternative method for producing ammonia. We then built an interpretable data-driven classification model which identified solvatochromic Kamlet-Taft parameters as important for distinguishing between active and inactive proton donors. After curating a dataset for the Kamlet-Taft parameters, we trained a deep learning model to predict the Kamlet-Taft parameters. The combination of classification model and deep learning model provides a predictive map** from a given proton donor to the ability to produce ammonia. We demonstrate that this combination of classification model with deep learning is superior to a purely mechanistic or data-driven approach in accuracy and experimental data efficiency. △ Less

Submitted 19 August, 2020; v1 submitted 18 August, 2020; originally announced August 2020.

Comments: 27 pages, 6 figures, 30 pages of Supporting Information

A Recipe for Geophysical Exploration of Enceladus

Authors: Anton I. Ermakov, Ryan S. Park, Javier Roa, Julie C. Castillo-Rogez, James T. Keane, Francis Nimmo, Edwin S. Kite, Christophe Sotin, T. Joseph W. Lazio, Gregor Steinbrügge, Samuel M. Howell, Bruce G. Bills, Douglas J. Hemingway, Vishnu Viswanathan, Gabriel Tobie, Valery Lainey

Abstract: Orbital geophysical investigations of Enceladus are critical to understanding its energy balance. We identified key science questions for the geophysical exploration of Enceladus, answering which would support future assessment of Enceladus' astrobiological potential. Using a Bayesian framework, we explored how science requirements map to measurement requirements. We performed mission simulations… ▽ More Orbital geophysical investigations of Enceladus are critical to understanding its energy balance. We identified key science questions for the geophysical exploration of Enceladus, answering which would support future assessment of Enceladus' astrobiological potential. Using a Bayesian framework, we explored how science requirements map to measurement requirements. We performed mission simulations to study the sensitivity of a single spacecraft and dual spacecraft configurations to static gravity and tidal Love numbers of Enceladus. We find that map** Enceladus' gravity field, improving the accuracy of the physical libration amplitude, and measuring Enceladus' tidal response would provide critical constraints on the internal structure, and establish a framework for assessing Enceladus' long-term habitability. This kind of investigation could be carried out as part of a life search mission at little additional resource requirements. △ Less

Submitted 6 May, 2021; v1 submitted 6 August, 2020; originally announced August 2020.

Comments: 21 pages, 6 figures. A paper submitted to PSJ, which is an extension of the white paper previously submitted to the decadal survey

Universal Battery Performance and Degradation Model for Electric Aircraft

Authors: Alexander Bills, Shashank Sripad, William L. Fredericks, Matthew Guttenberg, Devin Charles, Evan Frank, Venkatasubramanian Viswanathan

Abstract: Development of Urban Air Mobility (UAM) concepts has been primarily focused on electric vertical takeoff and landing aircraft (eVTOLs), small aircraft which can land and takeoff vertically, and which are powered by rechargeable (typically lithium-ion) batteries. Design, analysis, and operation of eVTOLs requires fast and accurate prediction of Li-ion battery performance throughout the lifetime of… ▽ More Development of Urban Air Mobility (UAM) concepts has been primarily focused on electric vertical takeoff and landing aircraft (eVTOLs), small aircraft which can land and takeoff vertically, and which are powered by rechargeable (typically lithium-ion) batteries. Design, analysis, and operation of eVTOLs requires fast and accurate prediction of Li-ion battery performance throughout the lifetime of the battery. eVTOL battery performance modeling must be particularly accurate at high discharge rates to ensure accurate simulation of the high power takeoff and landing portions of the flight. In this work, we generate a battery performance and thermal behavior dataset specific to eVTOL duty cycles. We use this dataset to develop a battery performance and degradation model (Cellfit) which employs physics-informed machine learning in the form of Universal Ordinary Differential Equations (U-ODE's) combined with an electrochemical cell model and degradation models which include solid electrolyte interphase (SEI) growth, lithium plating, and charge loss. We show that Cellfit with U-ODE's is better able to predict battery degradation than a mechanistic battery degradation model. We show that the improved accuracy of the degradation model improves the accuracy of the performance model. We believe that Cellfit will prove to be a valuable tool for eVTOL designers. △ Less

Submitted 16 March, 2021; v1 submitted 6 July, 2020; originally announced August 2020.

Comments: 38 pages, 5 figures, 8 pages of Supplementary information

Kinetics of lithium electrodeposition and strip**

Authors: Shashank Sripad, Daniel Korff, Steven C. DeCaluwe, Venkatasubramanian Viswanathan

Abstract: Electrodeposition and strip** are fundamental electrochemical processes for metals and have gained importance in rechargeable Li-ion batteries due to lithium metal electrodes. The electrode kinetics associated with lithium metal electrodeposition and strip** is crucial in determining performance at fast discharge and charge which is important for electric vertical take-off and landing (eVTOL)… ▽ More Electrodeposition and strip** are fundamental electrochemical processes for metals and have gained importance in rechargeable Li-ion batteries due to lithium metal electrodes. The electrode kinetics associated with lithium metal electrodeposition and strip** is crucial in determining performance at fast discharge and charge which is important for electric vertical take-off and landing (eVTOL) aircraft and electric vehicles (EV). In this work, we show the use of Marcus-Hush-Chidsey (MHC) kinetics to accurately predict the Tafel curve data from the work of Boyle et al. We discuss the differences in predictions of reorganization energies from the Marcus-Hush and the MHC models for lithium metal electrodes in four solvents. The MHC kinetic model is implemented and open-sourced within Cantera. Using the reaction kinetic model in a pseudo-2D battery model with a lithium anode paired with a LiFePO$_4$ cathode, we show the importance of accounting for the MHC kinetics and compare it to the use of Butler-Volmer (BV) and Marcus-Hush kinetic models. We find that significant deviation in the overpotentials associated with reaction kinetics for the two different rate laws for conditions of fast discharge and charge relevant for eVTOL and EV respectively. △ Less

Submitted 31 July, 2020; originally announced August 2020.

Comments: 10 pages, 5 figures, 2 pages of Supplementary Information

Journal ref: J. Chem. Phys. 153, 194701 (2020)

Marcus-Hush-Chidsey Kinetics at Electrode-Electrolyte Interfaces

Authors: Rachel Kurchin, Venkatasubramanian Viswanathan

Abstract: Electrochemical kinetics at electrode-electrolyte interfaces limit performance of devices including fuel cells and batteries. While the importance of moving beyond Butler-Volmer kinetics and incorporating the effect of electronic density of states of the electrode have been recognized, a unified framework that incorporates these aspects directly into electrochemical performance models is still lac… ▽ More Electrochemical kinetics at electrode-electrolyte interfaces limit performance of devices including fuel cells and batteries. While the importance of moving beyond Butler-Volmer kinetics and incorporating the effect of electronic density of states of the electrode have been recognized, a unified framework that incorporates these aspects directly into electrochemical performance models is still lacking. In this work, we explicitly account for the DFT-calculated density of states numerically in calculating electrochemical reaction rates for a variety of electrode-electrolyte interfaces. We first show the utility of this for two cases related to Li metal electrodeposition and strip** on a Li surface and a Cu surface (anode-free configuration). The deviation in reaction rates is minor for cases with flat densities of states such as Li, but is significant for Cu due to nondispersive d-bands creating large variation. Finally, we consider a semiconducting case of a solid-electrolyte interphase (SEI) consisting of LiF and Li$_2$CO$_3$ and note the importance of the Fermi level at the interface, pinned by the redox reaction occuring there. We identify the asymmetry in reaction rates as a function of discharge/charge naturally within this approach. The analysis code used in this work is available open-source on Github. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Comments: 5 pages, 4 figures

Journal ref: J. Chem. Phys. 153, 134706 (2020)

$\mathcal{P}^2$: Combining pressure and electrochemistry to synthesize superhydrides

Authors: Pin-Wen Guan, Russell J. Hemley, Venkatasubramanian Viswanathan

Abstract: Recently, superhydrides have been computationally identified and subsequently synthesized with a variety of metals at very high pressures. In this work, we evaluate the possibility of synthesizing superhydrides by uniquely combining electrochemistry and applied pressure. We perform computational searches for palladium superhydrides using density functional theory and particle swarm optimization ca… ▽ More Recently, superhydrides have been computationally identified and subsequently synthesized with a variety of metals at very high pressures. In this work, we evaluate the possibility of synthesizing superhydrides by uniquely combining electrochemistry and applied pressure. We perform computational searches for palladium superhydrides using density functional theory and particle swarm optimization calculations over a broad range of pressures and electrode potentials. We incorporate exchange-correlation functional uncertainty using the Bayesian error estimation formalism to quantify the uncertainty associated with the identified stable phases. Based on a thermodynamic analysis, we construct pressure-potential phase diagrams and provide an alternate synthesis concept, $\mathcal{P}^2$ (pressure-potential), to accessing novel phases having high hydrogen content. Palladium-hydrogen is a widely-studied material system with the highest hydride phase being Pd$_3$H$_4$. Most strikingly for this system, at potentials above hydrogen evolution and $\sim$300 MPa pressure, we find the possibility to make palladium superhydrides (e.g., PdH$_{10}$). We demonstrate the generalizability of this approach for La-H, Y-H and Mg-H with 10-100 fold reduction in required pressure for stabilizing phases. In addition, the $\mathcal{P}^2$ strategy allows stabilizing new phases that cannot be done purely by either pressure or potential and is a general approach that is likely to work for synthesizing other superhydrides at modest pressures. △ Less

Submitted 20 October, 2020; v1 submitted 30 July, 2020; originally announced July 2020.

Comments: 30 pages, 7 figures, 13 pages of Supplementary Material

Journal ref: PNAS November 16, 2021 118 (46) e2110470118

Robust Active Site Design of Single Atom Catalysts for Electrochemical Ammonia Synthesis

Authors: Lance Kavalsky, Venkatasubramanian Viswanathan

Abstract: In this work, we provide a computational methodological framework using the single-atom systems as an example material class for ammonia synthesis that is robust towards parameter selection. Applying this to Pt$_1$/g-C$_3$N$_4$, Ru$_1$/g-C$_3$N$_4$, and Fe$_1$/g-C$_3$N$_4$, we generate ensembles of limiting potentials, using the ensemble of functionals collected via Bayesian Error Estimation Funct… ▽ More In this work, we provide a computational methodological framework using the single-atom systems as an example material class for ammonia synthesis that is robust towards parameter selection. Applying this to Pt$_1$/g-C$_3$N$_4$, Ru$_1$/g-C$_3$N$_4$, and Fe$_1$/g-C$_3$N$_4$, we generate ensembles of limiting potentials, using the ensemble of functionals collected via Bayesian Error Estimation Functionals (BEEF), to robustly predict catalytic activity. We then extend this to study the scaling between NRR reaction intermediates and use it to identify that NNH* as the best descriptor for these relations. In addition, a procedure to investigate selectivity is outlined, and a more robust way to analyze the selectivity-activity trade-off is presented. For this single-atom material class, we find choosing catalysts that lie on the strong binding leg of the activity volcano are worth further exploration. Given the ease of integration of the proposed method with minimal additional computational cost, we believe this should become a routine part of analysis workflow for multi-electron electrochemical reactions. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Comments: 38 pages, 8 figures, 12 pages of Supporting Information

Uncertainty quantification in first-principles predictions of phonon properties and lattice thermal conductivity

Authors: Holden L. Parks, Hyun-Young Kim, Venkatasubramanian Viswanathan, Alan J. H. McGaughey

Abstract: We present a framework for quantifying the uncertainty that results from the choice of exchange-correlation (XC) functional in predictions of phonon properties and thermal conductivity that use density functional theory (DFT) to calculate the atomic force constants. The energy ensemble capabilities of the BEEF-vdW XC functional are first applied to determine an ensemble of interatomic force consta… ▽ More We present a framework for quantifying the uncertainty that results from the choice of exchange-correlation (XC) functional in predictions of phonon properties and thermal conductivity that use density functional theory (DFT) to calculate the atomic force constants. The energy ensemble capabilities of the BEEF-vdW XC functional are first applied to determine an ensemble of interatomic force constants, which are then used as inputs to lattice dynamics calculations and a solution of the Boltzmann transport equation. The framework is applied to isotopically-pure silicon. We find that the uncertainty estimates bound property predictions (e.g., phonon dispersions, specific heat, thermal conductivity) from other XC functionals and experiments. We distinguish between properties that are correlated with the predicted thermal conductivity [e.g., the transverse acoustic branch sound speed ($R^2=0.89$) and average Grüneisen parameter ($R^2=0.85$)] and those that are not [e.g., longitudinal acoustic branch sound speed ($R^2=0.23$) and specific heat ($R^2=0.00$)]. We find that differences in ensemble predictions of thermal conductivity are correlated with the behavior of phonons with mean free paths between $100$ and $300$ nm. The framework systematically accounts for XC uncertainty in phonon calculations and should be used whenever it is suspected that the choice of XC functional is influencing physical interpretations. △ Less

Submitted 11 May, 2020; originally announced May 2020.

Comments: 20 pages, 5 figures, 13 pages of Supplemental Material

Journal ref: Phys. Rev. Materials 4, 083805 (2020)

Machine Learning Enabled Discovery of Application Dependent Design Principles for Two-dimensional Materials

Authors: Victor Venturi, Holden Parks, Zeeshan Ahmad, Venkatasubramanian Viswanathan

Abstract: The large-scale search for high-performing candidate 2D materials is limited to calculating a few simple descriptors, usually with first-principles density functional theory calculations. In this work, we alleviate this issue by extending and generalizing crystal graph convolutional neural networks to systems with planar periodicity, and train an ensemble of models to predict thermodynamic, mechan… ▽ More The large-scale search for high-performing candidate 2D materials is limited to calculating a few simple descriptors, usually with first-principles density functional theory calculations. In this work, we alleviate this issue by extending and generalizing crystal graph convolutional neural networks to systems with planar periodicity, and train an ensemble of models to predict thermodynamic, mechanical, and electronic properties. To demonstrate the utility of this approach, we carry out a screening of nearly 45,000 structures for two largely disjoint applications: namely, mechanically robust composites and photovoltaics. An analysis of the uncertainty associated with our methods indicates the ensemble of neural networks is well-calibrated and has errors comparable with those from accurate first-principles density functional theory calculations. The ensemble of models allows us to gauge the confidence of our predictions, and to find the candidates most likely to exhibit effective performance in their applications. Since the datasets used in our screening were combinatorically generated, we are also able to investigate, using an innovative method, structural and compositional design principles that impact the properties of the structures surveyed and which can act as a generative model basis for future material discovery through reverse engineering. Our approach allowed us to recover some well-accepted design principles: for instance, we find that hybrid organic-inorganic perovskites with lead and tin tend to be good candidates for solar cell applications. △ Less

Submitted 19 March, 2020; originally announced March 2020.

Comments: 31 pages, 7 figures, 6 pages of Supporting Information

Journal ref: Machine Learning: Science and Technology, (2020)

Uncertainty Quantification of First Principles Computational Phase Diagram Predictions of Li-Si System Via Bayesian Sampling

Authors: Ying Yuan, Gregory Houchins, Pin-Wen Guan, Venkatasubramanian Viswanathan

Abstract: In this work, an assessment of the CALPHAD method trained on only density functional theory (DFT) data is performed for the Li-Si binary system, as a case study. Using a parameter sampling approach based on the Bayesian Error Estimation Functional (BEEF-vdW) exchange-correlation potential. By using built-in ensemble of functionals from BEEF-vdW, the uncertainties of the Gibbs Free Energy fitting p… ▽ More In this work, an assessment of the CALPHAD method trained on only density functional theory (DFT) data is performed for the Li-Si binary system, as a case study. Using a parameter sampling approach based on the Bayesian Error Estimation Functional (BEEF-vdW) exchange-correlation potential. By using built-in ensemble of functionals from BEEF-vdW, the uncertainties of the Gibbs Free Energy fitting parameters are obtained and can be propagated to the resulting phase diagram. To find the best fitting form of the CALPHAD model, we implement a model selection step using the Bayesian information criterion (BIC). Applying the best selected CALPHAD model from the DFT calculation, to other sampled BEEF functionals, an ensemble of CALPHAD models is generated leading to an ensemble of phase diagram predictions. The resulting phase diagrams are then compiled into a single-phase diagram representing the most probable phase predicted as well as a quantitative metric of confidence for the prediction. This treatment of uncertainty resulting from DFT provides a rigorous way to ensure the correlated errors of DFT is accounted for in the estimation of uncertainty. From the phase diagram, we have determined intercalation voltages for lithiated silicon. In combination, we can generate a better understanding of the phase transitions and voltage profile to make a more analysis-informed prediction for experiments and the performance of Si-anodes within batteries. △ Less

Submitted 23 February, 2020; originally announced March 2020.

Comments: 10 pages, 5 figures with Supplementary Materials of 7 pages, 13 figures

Autonomous discovery of battery electrolytes with robotic experimentation and machine-learning

Authors: Adarsh Dave, Jared Mitchell, Kirthevasan Kandasamy, Sven Burke, Biswajit Paria, Barnabas Poczos, Jay Whitacre, Venkatasubramanian Viswanathan

Abstract: Innovations in batteries take years to formulate and commercialize, requiring extensive experimentation during the design and optimization phases. We approached the design and selection of a battery electrolyte through a black-box optimization algorithm directly integrated into a robotic test-stand. We report here the discovery of a novel battery electrolyte by this experiment completely guided by… ▽ More Innovations in batteries take years to formulate and commercialize, requiring extensive experimentation during the design and optimization phases. We approached the design and selection of a battery electrolyte through a black-box optimization algorithm directly integrated into a robotic test-stand. We report here the discovery of a novel battery electrolyte by this experiment completely guided by the machine-learning software without human intervention. Motivated by the recent trend toward super-concentrated aqueous electrolytes for high-performance batteries, we utilize Dragonfly - a Bayesian machine-learning software package - to search mixtures of commonly used lithium and sodium salts for super-concentrated aqueous electrolytes with wide electrochemical stability windows. Dragonfly autonomously managed the robotic test-stand, recommending electrolyte designs to test and receiving experimental feedback in real time. In 40 hours of continuous experimentation over a four-dimensional design space with millions of potential candidates, Dragonfly discovered a novel, mixed-anion aqueous sodium electrolyte with a wider electrochemical stability window than state-of-the-art sodium electrolyte. A human-guided design process may have missed this optimal electrolyte. This result demonstrates the possibility of integrating robotics with machine-learning to rapidly and autonomously discover novel battery materials. △ Less

Submitted 22 October, 2019; originally announced January 2020.

Comments: 23 pages, 4 figures, 10 pages of Extended Data

Journal ref: Cell Reports Physical Science, 1, (2020) 100264

Uncertainty Quantification of DFT-predicted Finite Temperature Thermodynamic Properties within the Debye Model

Authors: Pinwen Guan, Gregory Houchins, Venkatasubramanian Viswanathan

Abstract: Finite-temperature effects can be included by calculating the vibrations properties and this can greatly improve the fidelity of computational screening. An important challenge for DFT-based screening is the sensitivity of the predictions to the choice of the exchange correlation function. In this work, we rigorously explore the sensitivity of finite temperature thermodynamic properties to the cho… ▽ More Finite-temperature effects can be included by calculating the vibrations properties and this can greatly improve the fidelity of computational screening. An important challenge for DFT-based screening is the sensitivity of the predictions to the choice of the exchange correlation function. In this work, we rigorously explore the sensitivity of finite temperature thermodynamic properties to the choice of the exchange correlation functional using the built-in error estimation capabilities within the Bayesian Error Estimation Functional. The vibrational properties are estimated using the Debye model and we quantify the uncertainty associated with finite-temperature properties for a diverse collection of materials. We find good agreement with experiment and small spread in predictions over different exchange correlation functionals for Mg, Al$_2$O$_3$, Al, Ca, and GaAs. In the case of Li, Li$_2$O, and NiO, however, we find a large spread in predictions as well as disagreement between experiment and functionals due to complex bonding environments. While the energetics generated by BEEF-vdW ensemble is typically normal, the complex map** through the Debye model leads to the derived finite temperature properties having non-Gaussian behavior. We test a wide variety of probability distributions that best represent the finite temperature distribution and find that properties such as specific heat, Gibbs free energy, entropy, and the thermal expansion coefficient are well described by normal or transformed normal distributions, while the prediction spread of volume at a given temperature does not appear to be drawn from a single distribution. △ Less

Submitted 4 October, 2019; originally announced October 2019.

Comments: 19 pages, 6 figures, 16 pages of Supporting Information

Journal ref: J. Chem. Phys. 151, 244702 (2019)

Computational Screening of Current Collectors for Enabling Anode-free Lithium Metal Batteries

Authors: Vikram Pande, Venkatasubramanian Viswanathan

Abstract: Lithium metal cells are key towards achieving high specific energy and energy density for electrification of transportation and aviation. Anode-free cells are the limiting case of lithium metal cells involving no excess lithium and the highest possible specific energy. In addition, anode-free cells are easier, cheaper and safer as they avoid handling and manufacturing of lithium metal foils. Issue… ▽ More Lithium metal cells are key towards achieving high specific energy and energy density for electrification of transportation and aviation. Anode-free cells are the limiting case of lithium metal cells involving no excess lithium and the highest possible specific energy. In addition, anode-free cells are easier, cheaper and safer as they avoid handling and manufacturing of lithium metal foils. Issues related to dendrite growth and poor cycling are magnified in anode-free cells due to lack of excess lithium. Electrolyte and current collector surface play a crucial role in affecting the cycling performance of anode-free cells. In this work, we have computationally screened for candidate current collectors that can nucleate lithium effectively and allow uniform growth. These are determined by the free energy of lithium adsorption and lithium surface diffusion barrier on candidate current collectors. Using density functional theory calculations, we show that Li-alloys possess ideal characteristics for Li nucleation and growth. These can lead to vastly improved specific energy compared to current transition metal current collectors. △ Less

Submitted 21 August, 2019; originally announced September 2019.

Comments: 21 pages, 5 figures, 1 table, 7 pages of Supporting Information

Journal ref: ACS Energy Lett., 2019, 4, 2952-2959

Automation is no barrier to light vehicle electrification

Authors: Aniruddh Mohan, Shashank Sripad, Parth Vaishnav, Venkatasubramanian Viswanathan

Abstract: Weight, computational load, sensor load, and possibly higher drag may increase the energy use of automated electric vehicles (AEVs) relative to human-driven electric vehicles (EVs), although this increase may be offset by smoother driving. We use a vehicle dynamics model to show that automation is likely to impose a minor penalty on EV range and have negligible effect on battery longevity. As such… ▽ More Weight, computational load, sensor load, and possibly higher drag may increase the energy use of automated electric vehicles (AEVs) relative to human-driven electric vehicles (EVs), although this increase may be offset by smoother driving. We use a vehicle dynamics model to show that automation is likely to impose a minor penalty on EV range and have negligible effect on battery longevity. As such, while some commentators have suggested that the power and energy requirements of automation mean that the first automated vehicles (AVs) will be gas-electric hybrids, we conclude that this need not be the case. We also find that drivers need to place only a modest value on the time saved by automation for its benefits to exceed direct costs. △ Less

Submitted 6 February, 2020; v1 submitted 7 August, 2019; originally announced August 2019.

Comments: 25 pages, 4 figures, 14 pages of Supporting Information

Journal ref: Nature Energy, (2020). Direct access link: https://rdcu.be/b5iR6

Descriptors for Electrolyte-Renormalized Oxidative Stability of Solvents in Lithium-ion Batteries

Authors: Vikram Pande, Venkatasubramanian Viswanathan

Abstract: Electrolyte stability against oxidation is one of the important factors limiting the development of high energy density batteries. HOMO level of solvent molecules has been successfully used for understanding trends in their oxidative stability but assumes a non-interacting environment. However, solvent HOMO levels are renormalized due to molecules in their solvation shells. In this work, we first… ▽ More Electrolyte stability against oxidation is one of the important factors limiting the development of high energy density batteries. HOMO level of solvent molecules has been successfully used for understanding trends in their oxidative stability but assumes a non-interacting environment. However, solvent HOMO levels are renormalized due to molecules in their solvation shells. In this work, we first demonstrate an inexpensive and accurate method to determine the HOMO level of solvent followed by simple descriptors for renormalization of HOMO level due to different electrolyte components. The descriptors are based on Gutmann Donor and Acceptor numbers of solvent and other components. The method uses fast GGA-level DFT calculations compared to previously used expensive, experimental data dependent methods. This method can be used to screen for unexplored stable solvents among the large number of known organic compounds to design novel high voltage stable electrolytes. △ Less

Submitted 8 August, 2019; originally announced August 2019.

Comments: 17 pages, 4 figures, 3 pages of Supporting Information

Journal ref: J. Phys. Chem. Lett., 2019, 10, 7031-7036

Design rules for liquid crystalline electrolytes for enabling dendrite-free lithium metal batteries

Authors: Zeeshan Ahmad, Zijian Hong, Venkatasubramanian Viswanathan

Abstract: Dendrite free electrodeposition of lithium metal is necessary for the adoption of high energy density rechargeable lithium metal batteries. Here, we demonstrate a new mechanism of using a liquid crystalline electrolyte to suppress dendrite growth with a lithium metal anode. A nematic liquid crystalline electrolyte modifies the kinetics of electrodeposition by introducing additional overpotential d… ▽ More Dendrite free electrodeposition of lithium metal is necessary for the adoption of high energy density rechargeable lithium metal batteries. Here, we demonstrate a new mechanism of using a liquid crystalline electrolyte to suppress dendrite growth with a lithium metal anode. A nematic liquid crystalline electrolyte modifies the kinetics of electrodeposition by introducing additional overpotential due to its bulk distortion and anchoring free energy. By extending the phase-field model, we simulate the morphological evolution of the metal anode and explore the role of bulk distortion and anchoring strengths on the electrodeposition process. We find that adsorption energy of liquid crystalline molecules on lithium surface can be a good descriptor for the anchoring energy and obtain it using first-principles density functional theory calculations. Unlike other extrinsic mechanisms, we find that liquid crystals with high anchoring strengths can ensure smooth electrodeposition of lithium metal, thus paving the way for practical applications in rechargeable batteries based on metal anodes. △ Less

Submitted 23 April, 2020; v1 submitted 9 July, 2019; originally announced July 2019.

Comments: 28 pages, 5 figures, 1 table, 18 pages of Supporting Information. v2: added molecular level calculations and design rules

Journal ref: Proc. Natl. Acad. Sci. U.S.A. 117, 26672 (2020)

Benchmarking conductivity predictions of the Advanced Electrolyte Model (AEM) for aqueous systems

Authors: Adarsh Dave, Kevin L. Gering, Jared M. Mitchell, Jay Whitacre, Venkatasubramanian Viswanathan

Abstract: High-concentration aqueous electrolytes have shown promise as candidates for a safer, lower-cost battery system. Ionic conductivity is a key property required in high performing electrolytes; the Advanced Electrolyte Model (AEM) has previously shown great accuracy in predicting ionic conductivity in highly-concentrated non-aqueous electrolytes. This work provides extensive experimental data for mi… ▽ More High-concentration aqueous electrolytes have shown promise as candidates for a safer, lower-cost battery system. Ionic conductivity is a key property required in high performing electrolytes; the Advanced Electrolyte Model (AEM) has previously shown great accuracy in predicting ionic conductivity in highly-concentrated non-aqueous electrolytes. This work provides extensive experimental data for mixed and highly concentrated aqueous electrolyte systems, rapidly generated via a robotic electrolyte testing apparatus. These data demonstrate exceptional accuracy from AEM in predicting conductivity in aqueous systems, with the accuracy being maintained even in highly-concentrated and mixed-salt regimes. △ Less

Submitted 14 June, 2019; originally announced June 2019.

Comments: 13 pages, 2 figures

Journal ref: Journal of The Electrochemical Society, (2020) 167 013514

Engineering Three-Dimensional (3D) Out-of-Plane Graphene Edge Sites for Highly-Selective Two-Electron Oxygen Reduction Electrocatalysis

Authors: Daniel San Roman, Dilip Krishnamurthy, Raghav Garg, Hasnain Hafiz, Noel Nuhfer, Venkatasubramanian Viswanathan, Tzahi Cohen-Karni

Abstract: Selective two-electron oxygen reduction reaction (ORR) offers a promising route for hydrogen peroxide synthesis, and defective sp2 carbon-based materials are attractive, low-cost electrocatalysts for this process. However, due to a wide range of possible defect structures formed during material synthesis, identification and fabrication of precise active sites remain a challenge. Here, we report a… ▽ More Selective two-electron oxygen reduction reaction (ORR) offers a promising route for hydrogen peroxide synthesis, and defective sp2 carbon-based materials are attractive, low-cost electrocatalysts for this process. However, due to a wide range of possible defect structures formed during material synthesis, identification and fabrication of precise active sites remain a challenge. Here, we report a graphene edgebased electrocatalyst for two-electron ORR - nanowire-templated three-dimensional fuzzy graphene (NT3DFG). NT-3DFG exhibits excellent efficiency (onset potential of 0.79 $\pm$ 0.01 V versus RHE), selectivity (93 $\pm$ 3 % H2O2), and tunable ORR activity as a function of graphene edge site density. Using spectroscopic surface characterization and density functional theory calculations, we find that NT-3DFG edge sites are readily functionalized by carbonyl (C=O) and hydroxyl (C-OH) groups under alkaline ORR conditions. Our calculations indicate that multiple site configurations at both armchair and zigzag edges may achieve a local coordination environment that allows selective, two-electron ORR. We derive a general geometric descriptor based on the local coordination environment that provides activity predictions of graphene surface sites within ~0.1 V of computed values. Herein we combine synthesis, spectroscopy, and simulations to improve active site characterization and accelerate carbon-based electrocatalyst discovery. △ Less

Submitted 19 September, 2019; v1 submitted 9 April, 2019; originally announced April 2019.

Comments: 33 pages, 36 pages of Supporting Information

Journal ref: ACS Catalysis (2020), 10, 1993-2008

Design Principles for Self-forming Interfaces Enabling Stable Lithium Metal Anodes

Authors: Yingying Zhu, Vikram Pande, Linsen Li, Sam Pan, Bohua Wen, David Wang, Venkatasubramanian Viswanathan, Yet-Ming Chiang

Abstract: The path toward Li-ion batteries with higher energy-densities will likely involve use of thin lithium metal (Li) anode (<50 $μ$m in thickness), whose cyclability today remains limited by dendrite formation and low Coulombic efficiency. Previous studies have shown that the solid-electrolyte-interface (SEI) of Li metal plays a crucial role in Li electrodeposition and strip**. However, design rules… ▽ More The path toward Li-ion batteries with higher energy-densities will likely involve use of thin lithium metal (Li) anode (<50 $μ$m in thickness), whose cyclability today remains limited by dendrite formation and low Coulombic efficiency. Previous studies have shown that the solid-electrolyte-interface (SEI) of Li metal plays a crucial role in Li electrodeposition and strip**. However, design rules for optimal SEIs on lithium metal are not well-established. Here, using integrated experimental and modeling studies on a series of structurally-similar SEI-modifying compounds as model systems, we reveal the relationship between SEI compositions, Li deposition morphology and coulombic efficiency, and identify two key descriptors (ionicity and compactness) for high performance SEIs through integrated experimental and modeling studies. Using this understanding, we design a highly ionic and compact SEI that shows excellent cycling performance in LiCoO$_2$-Li full cells at practical current densities. Our results provide guidance for the rational selection and optimization of SEI modifiers to further improve Li metal anodes. △ Less

Submitted 22 March, 2019; originally announced March 2019.

Comments: 21 pages, 6 figures and Supplementary Information

Observational constraint on the radius and oblateness of the lunar core-mantle boundary

Authors: Vishnu Viswanathan, Nicolas Rambaux, Agnes Fienga, Jacques Laskar, Mickael Gastineau

Abstract: Lunar laser ranging (LLR) data and Apollo seismic data analyses, revealed independent evidence for the presence of a fluid lunar core. However, the size of the lunar fluid core remained uncertain by $\pm55$ km (encompassing two contrasting 2011 Apollo seismic data analyses). Here we show that a new description of the lunar interior's dynamical model provides a determination of the radius and geome… ▽ More Lunar laser ranging (LLR) data and Apollo seismic data analyses, revealed independent evidence for the presence of a fluid lunar core. However, the size of the lunar fluid core remained uncertain by $\pm55$ km (encompassing two contrasting 2011 Apollo seismic data analyses). Here we show that a new description of the lunar interior's dynamical model provides a determination of the radius and geometry of the lunar core-mantle boundary (CMB) from the LLR observations. We compare the present-day lunar core oblateness obtained from LLR analysis with the expected hydrostatic model values, over a range of previously expected CMB radii. The findings suggest a core oblateness ($f_c=(2.2\pm0.6)\times10^{-4}$) that satisfies the assumption of hydrostatic equilibrium over a tight range of lunar CMB radii ($\mathcal{R}_{CMB}=381\pm12$ km). Our estimates of a presently-relaxed lunar CMB translates to a core mass fraction in the range of $1.59-1.77\%$ with a present-day Free Core Nutation (FCN) within $(367\pm100)$ years. △ Less

Submitted 21 June, 2019; v1 submitted 17 March, 2019; originally announced March 2019.

Comments: Accepted for publication in Geophysical Research Letters

Journal ref: Geophysical Research Letters (2019), 46, 7295-7303

Theoretical Characterization of Structural Disorder in the Tetramer Model Structure of Eumelanin

Authors: Oleg Sapunkov, Abhishek Khetan, Vikram Pande, Venkatasubramanian Viswanathan

Abstract: Eumelanin is regarded to be an attractive candidate material for biomedical applications. Despite many theoretical studies exploring the structure of eumelanin, an exact map** of the energetic landscape of the very large phase space of eumelanin is still elusive. In this work, we implement a piecewise Ising Model to predict formation enthalpies of Eumelanin single and double tetramers, and demon… ▽ More Eumelanin is regarded to be an attractive candidate material for biomedical applications. Despite many theoretical studies exploring the structure of eumelanin, an exact map** of the energetic landscape of the very large phase space of eumelanin is still elusive. In this work, we implement a piecewise Ising Model to predict formation enthalpies of Eumelanin single and double tetramers, and demonstrate its superior predictive and generalizable capabilities. We believe this model will prove very useful in theoretically characterizing the many unique properties attributed to its disorder. The modular nature of the predictive Ising model built up in this work is well-suited for analysis and characterization of a larger phase space of eumelanin polymers, including hexamers and octomers, as well as larger stacked structures, such as potential triple and quadruple eumelanin tetramers. Absorbance data can be incorporated with population-wide predictions of polymer abundance to produce weighted-average predictions of broadband absorbance of bulk eumelanin. △ Less

Submitted 25 February, 2019; originally announced February 2019.

Comments: 8 pages, 4 pages of Supporting Information

Journal ref: Phys. Rev. Materials 3, 105403 (2019)

Universal Chemomechanical Design Rules for Solid-Ion Conductors to Prevent Dendrite Formation in Lithium Metal Batteries

Authors: Chengyin Fu, Victor Venturi, Zeeshan Ahmad, Andrew W. Ells, Venkatasubramanian Viswanathan, Brett A. Helms

Abstract: Dendrite formation during electrodeposition while charging lithium metal batteries compromises their safety. While high shear modulus solid-ion conductors (SICs) have been prioritized to resolve pressure-driven instabilities that lead to dendrite propagation and cell shorting, it is unclear whether these or alternatives are needed to guide uniform lithium electrodeposition, which is intrinsically… ▽ More Dendrite formation during electrodeposition while charging lithium metal batteries compromises their safety. While high shear modulus solid-ion conductors (SICs) have been prioritized to resolve pressure-driven instabilities that lead to dendrite propagation and cell shorting, it is unclear whether these or alternatives are needed to guide uniform lithium electrodeposition, which is intrinsically density-driven. Here, we show that SICs can be designed within a universal chemomechanical paradigm to access either pressure-driven dendrite-blocking or density-driven dendrite-suppressing properties, but not both. This dichotomy reflects the competing influence of the SICs mechanical properties and partial molar volume of Li+ relative to those of the lithium anode on plating outcomes. Within this paradigm, we explore SICs in a previously unrecognized dendrite-suppressing regime that are concomitantly soft, as is typical of polymer electrolytes, but feature atypically low Li+ partial molar volume, more reminiscent of hard ceramics. Li plating mediated by these SICs is uniform, as revealed using synchrotron hard x-ray microtomography. As a result, cell cycle-life is extended, even when assembled with thin Li anodes and high-voltage NMC-622 cathodes, where 20 percent of the Li inventory is reversibly cycled. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Journal ref: Nature Materials, 19, 758-766 (2020)

Uncertainty Quantification in First-Principles Predictions of Harmonic Vibrational Frequencies of Molecules and Molecular Complexes

Authors: Holden L. Parks, Alan. J. H. McGaughey, Venkatasubramanian Viswanathan

Abstract: Accurate prediction of molecular vibrational frequencies is important to identify spectroscopic signatures and reaction thermodynamics. In this work, we develop a method to quantify uncertainty associated with density functional theory predicted harmonic vibration frequencies utilizing the built-in error estimation capabilities of the BEEF-vdW exchange-correlation functional. The method is computa… ▽ More Accurate prediction of molecular vibrational frequencies is important to identify spectroscopic signatures and reaction thermodynamics. In this work, we develop a method to quantify uncertainty associated with density functional theory predicted harmonic vibration frequencies utilizing the built-in error estimation capabilities of the BEEF-vdW exchange-correlation functional. The method is computationally efficiency by estimating the uncertainty at nearly the same computational cost as a single vibrational frequency calculation. We demonstrate the utility and robustness of the method by showing that the uncertainty estimates bounds the self-consistent calculations of six exchange correlation functionals for small molecules, rare gas dimers, and molecular complexes from the S22 dataset. Ten rare-gas dimers and the S22 dataset of molecular complexes provide a rigorous test as they are systems with complicated vibrational motion and non-covalent interactions. Using coefficient of variation as a uncertainty metric, we find that modes involving bending or torsional motion and those dominated by non-covalent interactions are found to have higher uncertainty in their predicted frequencies than covalent stretching modes. Given the simplicity of the method, we believe that this method can be easily adopted and should form a routine part of DFT-predicted harmonic frequency analysis. △ Less

Submitted 3 December, 2018; originally announced December 2018.

Comments: 32 pages, 40 pages of Supporting Information

Journal ref: J. Phys. Chem. C, 2019, 123 (7), pp 4072-4084

Towards Ultra Low Cobalt Cathodes: A High Fidelity Computational Phase Search of Layered Li-Ni-Mn-Co Oxides

Authors: Gregory Houchins, Venkatasubramanian Viswanathan

Abstract: Layered Li(Ni,Mn,Co,)O$_2$ (NMC) presents an intriguing ternary alloy design space for optimization as a cathode material in Li-ion batteries. Recently, the high cost and resource limitations of Co have added a new design constraint and high Ni-containing NMC alloys have gained enormous attention despite possible performance trade-offs. It is not fully understood if this material space is a disord… ▽ More Layered Li(Ni,Mn,Co,)O$_2$ (NMC) presents an intriguing ternary alloy design space for optimization as a cathode material in Li-ion batteries. Recently, the high cost and resource limitations of Co have added a new design constraint and high Ni-containing NMC alloys have gained enormous attention despite possible performance trade-offs. It is not fully understood if this material space is a disordered solid solution at room temperature and any arbitrary combination can be used or if there exist distinct transition metal orderings to which meta-stable solid solutions will decay during cycling and affect performance. Here, we present a high fidelity computational search of the ternary phase diagram with an emphasis on high-Ni, and thus low Co, containing compositional phases to understand the room temperature stability of the ordered and disordered solid solution phases. This is done through the use of density functional theory training data fed into a reduced order model Hamiltonian that accounts for effective electronic and spin interactions of neighboring transition metal atoms at various lengths in a background of fixed composition and position lithium and oxygen atoms. This model can then be solved to include finite temperature thermodynamics into a convex hull analysis to understand the regions of ordered and disordered solid solution as well the transition metal orderings within the ordered region of the phase diagram. We find that for the majority of transition metal compositions of the layered material, specifically medium to high-Ni content, prefer transition metal ordering and predict the collection of preferred compositions in the ordered region. △ Less

Submitted 21 August, 2019; v1 submitted 21 May, 2018; originally announced May 2018.

Comments: 30 pages, 8 figures, 7 pages of Supporting Information

Journal ref: J. Electrochem. Soc. (2020) 167, 070506

Phase-field simulations of lithium dendrite growth with open-source software

Authors: Zijian Hong, Venkatasubramanian Viswanathan

Abstract: Dendrite growth is a long-standing challenge that has limited the applications of rechargeable lithium metal electrodes. Here, we developed a grand potential based nonlinear phase-field model to study the electrodeposition of lithium as relevant for a lithium metal anode, using open-source software package MOOSE. The dynamic morphological evolution under large/small overpotential is studied in 2-d… ▽ More Dendrite growth is a long-standing challenge that has limited the applications of rechargeable lithium metal electrodes. Here, we developed a grand potential based nonlinear phase-field model to study the electrodeposition of lithium as relevant for a lithium metal anode, using open-source software package MOOSE. The dynamic morphological evolution under large/small overpotential is studied in 2-dimensions, revealing important dendrite growth/stable deposition patterns. The corresponding temporal-spatial distributions of ion concentration, overpotential and driving force are studied, which demonstrate an intimate, dynamic competition between ion transport and electrochemical reactions, resulting in vastly different growth patterns. Given the importance of morphological evolution for lithium metal electrodes, wide-spread applications of phase-field models have been limited in part due to in-house or proprietary software. In order to spur growth of this field, we utilize an open-source software package and make all files available to enable future studies to study the many unsolved aspects related to morphology evolution for lithium metal electrodes. △ Less

Submitted 8 May, 2018; originally announced May 2018.

Comments: 16 pages, 4 figures, 11 pages of Supporting Information

Journal ref: ACS Energy Letters, 2018, 3, 1737-1743

Quantifying the Economic Case for Electric Semi-Trucks

Authors: Shashank Sripad, Venkatasubramanian Viswanathan

Abstract: There has been considerable interest in the electrification of freight transport, particularly heavy-duty trucks to downscale the greenhouse-gas (GHG) emissions from the transportation sector. However, the economic competitiveness of electric semi-trucks is uncertain as there are substantial additional initial costs associated with the large battery packs required. In this work, we analyze the tra… ▽ More There has been considerable interest in the electrification of freight transport, particularly heavy-duty trucks to downscale the greenhouse-gas (GHG) emissions from the transportation sector. However, the economic competitiveness of electric semi-trucks is uncertain as there are substantial additional initial costs associated with the large battery packs required. In this work, we analyze the trade-off between the initial investment and the operating cost for realistic usage scenarios to compare a fleet of electric semi-trucks with a range of 500 miles with a fleet of diesel trucks. For the baseline case with 30% of fleet requiring battery pack replacements and a price differential of US\$50,000, we find a payback period of about 3 years. Based on sensitivity analysis, we find that the fraction of the fleet that requires battery pack replacements is a major factor. For the case with 100% replacement fraction, the payback period could be as high as 5-6 years. We identify the price of electricity as the second most important variable, where a price of US$0.14/kWh, the payback period could go up to 5 years. Electric semi-trucks are expected to lead to savings due to reduced repairs and magnitude of these savings could play a crucial role in the payback period as well. With increased penetration of autonomous vehicles, the annual mileage of semi-trucks could substantially increase and this heavily sways in favor of electric semi-trucks, bringing down the payback period to around 2 years at an annual mileage of 120,000 miles. There is an undeniable economic case for electric semi-trucks and develo** battery packs with longer cycle life and higher specific energy would make this case even stronger. △ Less

Submitted 16 April, 2018; originally announced April 2018.

Comments: 12 pages, 3 figures, 1 table, 5 pages of SI

Journal ref: ACS Energy Lett., 2019, 4, 149-155

Machine Learning Enabled Computational Screening of Inorganic Solid Electrolytes for Dendrite Suppression with Li Metal Anode

Authors: Zeeshan Ahmad, Tian Xie, Chinmay Maheshwari, Jeffrey C. Grossman, Venkatasubramanian Viswanathan

Abstract: Next generation batteries based on lithium (Li) metal anodes have been plagued by the dendritic electrodeposition of Li metal on the anode during cycling, resulting in short circuit and capacity loss. Suppression of dendritic growth through the use of solid electrolytes has emerged as one of the most promising strategies for enabling the use of Li metal anodes. We perform a computational screening… ▽ More Next generation batteries based on lithium (Li) metal anodes have been plagued by the dendritic electrodeposition of Li metal on the anode during cycling, resulting in short circuit and capacity loss. Suppression of dendritic growth through the use of solid electrolytes has emerged as one of the most promising strategies for enabling the use of Li metal anodes. We perform a computational screening of over 12,000 inorganic solids based on their ability to suppress dendrite initiation in contact with Li metal anode. Properties for mechanically isotropic and anisotropic interfaces that can be used in stability criteria for determining the propensity of dendrite initiation are usually obtained from computationally expensive first-principles methods. In order to obtain a large dataset for screening, we use machine learning models to predict the mechanical properties of several new solid electrolytes. We train a convolutional neural network on the shear and bulk moduli purely on structural features of the material. We use AdaBoost, Lasso and Bayesian ridge regression to train the elastic constants, where the choice of the model depended on the size of the training data and the noise that it can handle. Our models give us direct interpretability by revealing the dominant structural features affecting the elastic constants. The stiffness is found to increase with a decrease in volume per atom, increase in minimum anion-anion separation, and increase in sublattice (all but Li) packing fraction. Cross-validation/test performance suggests our models generalize well. We predict over 20 mechanically anisotropic interfaces between Li metal and 6 solid electrolytes which can be used to suppress dendrite growth. Our screened candidates are generally soft and highly anisotropic, and present opportunities for simultaneously obtaining dendrite suppression and high ionic conductivity in solid electrolytes. △ Less

Submitted 12 April, 2018; originally announced April 2018.

Comments: 34 pages, 4 Figures, 3 Table, 7 pages of Supporting Information

Journal ref: ACS Cent. Sci., 2018, 4 (8), 996-1006

Quantifying Confidence in DFT Predicted Surface Pourbaix Diagrams and Associated Reaction Pathways for Chlorine Evolution

Authors: Vaidish Sumaria, Dilip Krishnamurthy, Venkatasubramanian Viswanathan

Abstract: Density functional theory calculations can be used to identify dominant reaction mechanisms. However, the dominant reaction mechanism is sensitive to choice of the exchange correlation functional. Here, we demonstrate using the example case of chlorine evolution reaction on rutile oxides, which can occur through at least three reaction mechanisms each mediated by different surface intermediates an… ▽ More Density functional theory calculations can be used to identify dominant reaction mechanisms. However, the dominant reaction mechanism is sensitive to choice of the exchange correlation functional. Here, we demonstrate using the example case of chlorine evolution reaction on rutile oxides, which can occur through at least three reaction mechanisms each mediated by different surface intermediates and active sites. We utilize Bayesian error estimation capabilities within the BEEF-vdW exchange correlation (XC) functional to quantify the uncertainty associated with predictions of the operative reaction mechanism by systematically propagating the uncertainty originating from DFT-computed adsorption free energies. We construct surface Pourbaix diagrams based on the calculated adsorption free energies for rutile oxides of Ru, Ir, Ti, Pt, V, Sn and Rh. We utilize confidence-value (c-value) to determine the degree of confidence in the predicted surface phase diagrams. Using the scaling relations between the adsorption energies of intermediates we construct a generalized Pourbaix diagram showing the stable surface composition as a function of potential and the oxygen binding energy on the cus site. This is used to consistently determine activity volcano relationships. We incorporate the uncertainty in linear scaling relations to quantify the confidence in generalized Pourbaix diagram and the associated activity. This allows us to compute the expectation limiting potential as a function of $ΔE_{O^c}$, which provides a more appropriate activity measure incorporating DFT uncertainty. We show that the confidence in the classification problem of identifying the active reaction mechanism is much better than the prediction problem of determining catalytic activity. △ Less

Submitted 8 April, 2018; originally announced April 2018.

Comments: 19 pages, 5 figures, 15 pages of Supporting Information

Journal ref: ACS Catal., 2018, 8, 9034-9042

Understanding Ion Pairing in High Salt Concentration Electrolytes using Classical Molecular Dynamics Simulations and its Implications for Nonaqueous Li-O$_2$ Batteries

Authors: Abhishek Khetan, Hamid Arjmandi, Vikram Pande, Heinz Pitsch, Venkatasubramanian Viswanathan

Abstract: A precise understanding of solvation is essential for rational search and design of electrolytes that can meet performance demands in Li-ion and beyond Li-ion batteries. In the context of Li-O$_2$ batteries, ion pairing is decisive in determining battery capacity via the solution mediated discharge mechanism without compromising heavily on electrolyte stability. We argue that models based on coord… ▽ More A precise understanding of solvation is essential for rational search and design of electrolytes that can meet performance demands in Li-ion and beyond Li-ion batteries. In the context of Li-O$_2$ batteries, ion pairing is decisive in determining battery capacity via the solution mediated discharge mechanism without compromising heavily on electrolyte stability. We argue that models based on coordination numbers of the counterion in the first solvation shell are inadequate at describing the extent of ion pairing, especially at higher salt concentrations, and are often not consistent with experimental observations. In this study, we use classical molecular dynamics simulations for several salt anions (NO$_3^-$, BF$_4^-$, CF$_3$SO$_3^-$, (CF$_3$SO$_2$)$_2$N$^-$) and nonaqueous solvent (DMSO, DME, ACN, THF, DMA) combinations to improve the understanding of ion paring with the help of a new metric of ion-pairing. We proposed a metric that defines the degree of clustering of a cation by its counterions and solvent molecules on a continuous scale, the limits if which are based on a simple and intuitive condition of charge neutrality. Using these metrics, we identify the extent of ion pairing in good agreement with experimental solvation phase diagrams and further discuss its usefulness in understanding commonly employed measures of salt and solvent donicity such as the Gutmann donor number. △ Less

Submitted 27 January, 2018; originally announced January 2018.

Comments: 26 pages, 8 figures, 26 pages of supporting information

Vulnerabilities of Electric Vehicle Battery Packs to Cyberattacks

Authors: Shashank Sripad, Sekar Kulandaivel, Vikram Pande, Vyas Sekar, Venkatasubramanian Viswanathan

Abstract: Electric Vehicles (EVs), like all modern vehicles, are entirely controlled by electronic devices embedded within networks that are exposed to the threat of cyberattacks. Cyber vulnerabilities are magnified with EVs due to unique risks associated with EV battery packs. Current batteries have well-known issues with specific energy, cost and fire-related safety risks. In this study, we develop a syst… ▽ More Electric Vehicles (EVs), like all modern vehicles, are entirely controlled by electronic devices embedded within networks that are exposed to the threat of cyberattacks. Cyber vulnerabilities are magnified with EVs due to unique risks associated with EV battery packs. Current batteries have well-known issues with specific energy, cost and fire-related safety risks. In this study, we develop a systematic framework to assess the impact of cyberattacks on EVs. While the current focus of automotive cyberattacks is on short-term physical safety, it is crucial to consider long-term cyberattacks that aim to cause financial losses through accrued impact, especially in the context of EVs. Faulty components of battery management systems such as a compromised voltage regulator could lead to cyberattacks that can overdischarge or overcharge the battery. Overdischarge could lead to failures such as internal shorts in the timescale of minutes through cyberattacks that compromise energy-intensive EV subsystems like auxiliary components. Attacks that overcharge the pack could shorten the lifetime of a new battery pack to less than a year. Further, such attacks also pose physical safety risks via the triggering of thermal (fire) events. Attacks on auxiliary components lead to battery drain, which could be up to 20% of the state-of-charge per hour. Lastly, we develop a heuristic for the stealthiness of a cyberattack to augment traditional threat models. The methodology presented here will help in building the foundational principles of electric vehicle cybersecurity: a nascent but critical topic in the coming years. △ Less

Submitted 8 September, 2019; v1 submitted 1 November, 2017; originally announced November 2017.

Comments: 23 pages, 3 figures, 1 table, 9 pages of Supporting Information

The new lunar ephemeris INPOP17a and its application to fundamental physics

Authors: V. Viswanathan, A. Fienga, O. Minazzoli, L. Bernus, J. Laskar, M. Gastineau

Abstract: We present here the new INPOP lunar ephemeris, INPOP17a. This ephemeris is obtained through the numerical integration of the equations of motion and of rotation of the Moon, fitted over 48 years of Lunar Laser Ranging (LLR) data. We also include the 2 years of infrared (IR) LLR data acquired at the Grasse station between 2015 and 2017. Tests of the universality of free fall are performed. We find… ▽ More We present here the new INPOP lunar ephemeris, INPOP17a. This ephemeris is obtained through the numerical integration of the equations of motion and of rotation of the Moon, fitted over 48 years of Lunar Laser Ranging (LLR) data. We also include the 2 years of infrared (IR) LLR data acquired at the Grasse station between 2015 and 2017. Tests of the universality of free fall are performed. We find no violation of the principle of equivalence at the 10-14 level. A new interpretation in the frame of dilaton theories is also proposed. △ Less

Submitted 25 October, 2017; originally announced October 2017.

Comments: 13 pages, 8 figures; Submitted to MNRAS: MN-17-3735-MJ

Journal ref: MNRAS, 476 (2018) 1877-1888

Quantifying Confidence in DFT Predicted Surface Pourbaix Diagrams of Transition Metal Electrode-Electrolyte Interfaces

Authors: Olga Vinogradova, Dilip Krishnamurthy, Vikram Pande, Venkatasubramanian Viswanathan

Abstract: Density Functional Theory (DFT) calculations have been widely used to predict the activity of catalysts based on the free energies of reaction intermediates. The incorporation of the state of the catalyst surface under the electrochemical operating conditions while constructing the free energy diagram is crucial, without which even trends in activity predictions could be imprecisely captured. Surf… ▽ More Density Functional Theory (DFT) calculations have been widely used to predict the activity of catalysts based on the free energies of reaction intermediates. The incorporation of the state of the catalyst surface under the electrochemical operating conditions while constructing the free energy diagram is crucial, without which even trends in activity predictions could be imprecisely captured. Surface Pourbaix diagrams indicate the surface state as a function of the pH and the potential. In this work, we utilize error-estimation capabilities within the BEEF-vdW exchange correlation functional as an ensemble approach to propagate the uncertainty associated with the adsorption energetics in the construction of Pourbaix diagrams. Within this approach, surface-transition phase boundaries are no longer sharp and are therefore associated with a finite width. We determine the surface phase diagram for several transition metals under reaction conditions and electrode potentials relevant for the Oxygen Reduction Reaction (ORR). We observe that our surface phase predictions for most predominant species are in good agreement with cyclic voltammetry experiments and prior DFT studies. We use the OH$^*$ intermediate for comparing adsorption characteristics on Pt(111), Pt(100), Pd(111), Ir(111), Rh(111), and Ru(0001) since it has been shown to have a higher prediction efficiency relative to O$^*$, and find the trend Ru>Rh>Ir>Pt>Pd for (111) metal facets, where Ru binds OH$^*$ the strongest. We robustly predict the likely surface phase as a function of reaction conditions by associating c-values to quantifying the confidence in predictions within the Pourbaix diagram. We define a confidence quantifying metric using which certain experimentally observed surface phases and peak assignments can be better rationalized. △ Less

Submitted 5 July, 2018; v1 submitted 23 October, 2017; originally announced October 2017.

Comments: 21 pages, 8 figures and Supporting Information