Showing 1–50 of 62 results for author: Visser, J

Minimally Interactive Segmentation of Soft-Tissue Tumors on CT and MRI using Deep Learning

Authors: Douwe J. Spaanderman, Martijn P. A. Starmans, Gonnie C. M. van Erp, David F. Hanff, Judith H. Sluijter, Anne-Rose W. Schut, Geert J. L. H. van Leenders, Cornelis Verhoef, Dirk J. Grunhagen, Wiro J. Niessen, Jacob J. Visser, Stefan Klein

Abstract: Segmentations are crucial in medical imaging to obtain morphological, volumetric, and radiomics biomarkers. Manual segmentation is accurate but not feasible in the radiologist's clinical workflow, while automatic segmentation generally obtains sub-par performance. We therefore developed a minimally interactive deep learning-based segmentation method for soft-tissue tumors (STTs) on CT and MRI. The… ▽ More Segmentations are crucial in medical imaging to obtain morphological, volumetric, and radiomics biomarkers. Manual segmentation is accurate but not feasible in the radiologist's clinical workflow, while automatic segmentation generally obtains sub-par performance. We therefore developed a minimally interactive deep learning-based segmentation method for soft-tissue tumors (STTs) on CT and MRI. The method requires the user to click six points near the tumor's extreme boundaries. These six points are transformed into a distance map and serve, with the image, as input for a Convolutional Neural Network. For training and validation, a multicenter dataset containing 514 patients and nine STT types in seven anatomical locations was used, resulting in a Dice Similarity Coefficient (DSC) of 0.85$\pm$0.11 (mean $\pm$ standard deviation (SD)) for CT and 0.84$\pm$0.12 for T1-weighted MRI, when compared to manual segmentations made by expert radiologists. Next, the method was externally validated on a dataset including five unseen STT phenotypes in extremities, achieving 0.81$\pm$0.08 for CT, 0.84$\pm$0.09 for T1-weighted MRI, and 0.88\pm0.08 for previously unseen T2-weighted fat-saturated (FS) MRI. In conclusion, our minimally interactive segmentation method effectively segments different types of STTs on CT and MRI, with robust generalization to previously unseen phenotypes and imaging modalities. △ Less

Submitted 12 February, 2024; originally announced February 2024.

Geometry dependence of TLS noise and loss in a-SiC:H parallel plate capacitors for superconducting microwave resonators

Authors: K. Kouwenhoven, G. P. J. van Doorn, B. T. Buijtendorp, S. A. H. de Rooij, D. Lamers, D. J. Thoen, V. Murugesan, J. J. A. Baselmans, P. J. de Visser

Abstract: Parallel plate capacitors (PPC) significantly reduce the size of superconducting microwave resonators, reducing the pixel pitch for arrays of single photon energy-resolving kinetic inductance detectors (KIDs). The frequency noise of KIDs is typically limited by tunneling Two-Level Systems (TLS), which originate from lattice defects in the dielectric materials required for PPCs. How the frequency n… ▽ More Parallel plate capacitors (PPC) significantly reduce the size of superconducting microwave resonators, reducing the pixel pitch for arrays of single photon energy-resolving kinetic inductance detectors (KIDs). The frequency noise of KIDs is typically limited by tunneling Two-Level Systems (TLS), which originate from lattice defects in the dielectric materials required for PPCs. How the frequency noise level depends on the PPC's dimensions has not been experimentally addressed. We measure the frequency noise of 56 resonators with a-SiC:H PPCs, which cover a factor 44 in PPC area and a factor 4 in dielectric thickness. To support the noise analysis, we measure the TLS-induced, power-dependent, intrinsic loss and temperature-dependent resonance frequency shift of the resonators. From the TLS models, we expect a geometry-independent microwave loss and resonance frequency shift, set by the TLS properties of the dielectric. However, we observe a thickness-dependent microwave loss and resonance frequency shift, explained by surface layers that limit the performance of PPC-based resonators. For a uniform dielectric, the frequency noise level should scale directly inversely with the PPC area and thickness. We observe that an increase in PPC size reduces the frequency noise, but the exact scaling is, in some cases, weaker than expected. Finally, we derive an engineering guideline for the design of KIDs based on PPC-based resonators. △ Less

Submitted 8 May, 2024; v1 submitted 21 November, 2023; originally announced November 2023.

Comments: 13 pages, 11 figures

Journal ref: Phys.Rev.Appl. 21 (2024) 044036

A Study of Adoption and Effects of DevOps Practices

Authors: Tyron Offerman, Robert Blinde, Christoph Johann Stettina, Joost Visser

Abstract: Many organizations adopt DevOps practices and tools in order to break down silos within the organization, improve software quality and delivery, and increase customer satisfaction. However, the impact of the individual practices on the performance of the organization is not well known. In this paper, we collect evidence on the effects of DevOps practices and tools on organizational performance. In… ▽ More Many organizations adopt DevOps practices and tools in order to break down silos within the organization, improve software quality and delivery, and increase customer satisfaction. However, the impact of the individual practices on the performance of the organization is not well known. In this paper, we collect evidence on the effects of DevOps practices and tools on organizational performance. In an extensive literature search we identified 14 DevOps practices, consisting of 47 subpractices. Based on these practices, we conducted a global survey to study their effects in practice, and measure DevOps maturity. Across 123 respondents, working in 11 different industries, we found that 13 of the 14 DevOps practices are adopted, determined by 50\% of the participants indicating that practices are `always', `most of the time', and 'about half of the time' applied. There is a positive correlation between the adoption of all practices and independently measured maturity. In particular, practices concerning sandboxes for minimum deployment, test-driven development, and trunk based development show the lowest correlations in our data. Effects of software delivery and organizational performance are mainly perceived positive. Yet, DevOps is also considered by some to have a negative impact such as respondents mentioning the predictability of product delivery has decreased and work is less fun. Concluding, our detailed overview of DevOps practices allows more targeted application of DevOps practices to obtain its positive effects while minimizing any negative effects. △ Less

Submitted 17 November, 2022; originally announced November 2022.

Comments: to be published in conference proceedings of 28th IEEE ICE/ITMC & 31st IAMOT Conference IEEE

Resolving Power of Visible to Near-Infrared Hybrid $β$-Ta/NbTiN Kinetic Inductance Detectors

Authors: Kevin Kouwenhoven, Daniel Fan, Enrico Biancalani, Steven A. H. de Rooij, Tawab Karim, Carlas S. Smith, Vignesh Murugesan, David J. Thoen, Jochem J. A. Baselmans, Pieter J. de Visser

Abstract: Kinetic Inductance Detectors (KIDs) are superconducting energy-resolving detectors, sensitive to single photons from the near-infrared to ultraviolet. We study a hybrid KID design consisting of a beta phase tantalum ($β$-Ta) inductor and a NbTiN interdigitated capacitor (IDC). The devices show an average intrinsic quality factor $Q_i$ of 4.3$\times10^5$ $\pm$ 1.3 $\times10^5$. To increase the powe… ▽ More Kinetic Inductance Detectors (KIDs) are superconducting energy-resolving detectors, sensitive to single photons from the near-infrared to ultraviolet. We study a hybrid KID design consisting of a beta phase tantalum ($β$-Ta) inductor and a NbTiN interdigitated capacitor (IDC). The devices show an average intrinsic quality factor $Q_i$ of 4.3$\times10^5$ $\pm$ 1.3 $\times10^5$. To increase the power captured by the light sensitive inductor, we 3D-print an array of 150$\times$150 $μ$m resin micro lenses on the backside of the sapphire substrate. The shape deviation between design and printed lenses is smaller than 1$μ$m, and the alignment accuracy of this process is $δ_x = +5.8 \pm 0.5$ $μ$m and $δ_y = +8.3 \pm 3.3$ $μ$m. We measure a resolving power for 1545-402 nm that is limited to 4.9 by saturation in the KID's phase response. We can model the saturation in the phase response with the evolution of the number of quasiparticles generated by a photon event. An alternative coordinate system that has a linear response raises the resolving power to 5.9 at 402 nm. We verify the measured resolving power with a two-line measurement using a laser source and a monochromator. We discuss several improvements that can be made to the devices on a route towards KID arrays with high resolving powers. △ Less

Submitted 13 February, 2023; v1 submitted 12 July, 2022; originally announced July 2022.

Comments: 13 pages, 11 Figures, Journal Paper

Journal ref: Phys. Rev. Appl. 19 (2023) 034007

Model and Measurements of an Optical Stack for Broadband Visible to Near-IR Absorption in TiN KIDs

Authors: K. Kouwenhoven, I. Elwakil, J. van Wingerden, V. Murugesan, D. J. Thoen, J. J. A. Baselmans, P. J. de Visser

Abstract: Typical materials for optical Kinetic Inductance Detetectors (KIDs) are metals with a natural absorption of 30-50% in the visible and near-infrared. To reach high absorption efficiencies (90-100%) the KID must be embedded in an optical stack. We show an optical stack design for a 60 nm TiN film. The optical stack is modeled as sections of transmission lines, where the parameters for each section a… ▽ More Typical materials for optical Kinetic Inductance Detetectors (KIDs) are metals with a natural absorption of 30-50% in the visible and near-infrared. To reach high absorption efficiencies (90-100%) the KID must be embedded in an optical stack. We show an optical stack design for a 60 nm TiN film. The optical stack is modeled as sections of transmission lines, where the parameters for each section are related to the optical properties of each layer. We derive the complex permittivity of the TiN film from a spectral ellipsometry measurement. The designed optical stack is optimised for broadband absorption and consists of, from top (illumination side) to bottom: 85 nm SiOx, 60 nm TiN, 23 nm of SiOx, and a 100 nm thick Al mirror. We show the modeled absorption and reflection of this stack, which has >80% absorption from 400 nm to 1550 nm and near-unity absorption for 500 nm to 800 nm. We measure transmission and reflection of this stack with a commercial spectrophotometer. The results are in good agreement with the model. △ Less

Submitted 15 August, 2022; v1 submitted 12 October, 2021; originally announced October 2021.

Comments: 8 pages, 5 figures (color), Journal of Low Temperature Physics (2022)

Journal ref: Low.Temp.Phys 209 (2022) 1249-1257

Two Many Cooks: Understanding Dynamic Human-Agent Team Communication and Perception Using Overcooked 2

Authors: Andres Rosero, Faustina Dinh, Ewart J. de Visser, Tyler Shaw, Elizabeth Phillips

Abstract: This paper describes a research study that aims to investigate changes in effective communication during human-AI collaboration with special attention to the perception of competence among team members and varying levels of task load placed on the team. We will also investigate differences between human-human teamwork and human-agent teamwork. Our project will measure differences in the communicat… ▽ More This paper describes a research study that aims to investigate changes in effective communication during human-AI collaboration with special attention to the perception of competence among team members and varying levels of task load placed on the team. We will also investigate differences between human-human teamwork and human-agent teamwork. Our project will measure differences in the communication quality, team perception and performance of a human actor playing a Commercial Off - The Shelf game (COTS) with either a human teammate or a simulated AI teammate under varying task load. We argue that the increased cognitive workload associated with increases task load will be negatively associated with team performance and have a negative impact on communication quality. In addition, we argue that positive team perceptions will have a positive impact on the communication quality between a user and teammate in both the human and AI teammate conditions. This project will offer more refined insights on Human - AI relationship dynamics in collaborative tasks by considering communication quality, team perception, and performance under increasing cognitive workload. △ Less

Submitted 6 October, 2021; originally announced October 2021.

Comments: Presented at AI-HRI symposium as part of AAAI-FSS 2021 (arXiv:2109.10836)

Report number: AIHRI/2021/28

Reproducible radiomics through automated machine learning validated on twelve clinical applications

Authors: Martijn P. A. Starmans, Sebastian R. van der Voort, Thomas Phil, Milea J. M. Timbergen, Melissa Vos, Guillaume A. Padmos, Wouter Kessels, David Hanff, Dirk J. Grunhagen, Cornelis Verhoef, Stefan Sleijfer, Martin J. van den Bent, Marion Smits, Roy S. Dwarkasing, Christopher J. Els, Federico Fiduzi, Geert J. L. H. van Leenders, Anela Blazevic, Johannes Hofland, Tessa Brabander, Renza A. H. van Gils, Gaston J. H. Franssen, Richard A. Feelders, Wouter W. de Herder, Florian E. Buisman , et al. (21 additional authors not shown)

Abstract: Radiomics uses quantitative medical imaging features to predict clinical outcomes. Currently, in a new clinical application, finding the optimal radiomics method out of the wide range of available options has to be done manually through a heuristic trial-and-error process. In this study we propose a framework for automatically optimizing the construction of radiomics workflows per application. To… ▽ More Radiomics uses quantitative medical imaging features to predict clinical outcomes. Currently, in a new clinical application, finding the optimal radiomics method out of the wide range of available options has to be done manually through a heuristic trial-and-error process. In this study we propose a framework for automatically optimizing the construction of radiomics workflows per application. To this end, we formulate radiomics as a modular workflow and include a large collection of common algorithms for each component. To optimize the workflow per application, we employ automated machine learning using a random search and ensembling. We evaluate our method in twelve different clinical applications, resulting in the following area under the curves: 1) liposarcoma (0.83); 2) desmoid-type fibromatosis (0.82); 3) primary liver tumors (0.80); 4) gastrointestinal stromal tumors (0.77); 5) colorectal liver metastases (0.61); 6) melanoma metastases (0.45); 7) hepatocellular carcinoma (0.75); 8) mesenteric fibrosis (0.80); 9) prostate cancer (0.72); 10) glioma (0.71); 11) Alzheimer's disease (0.87); and 12) head and neck cancer (0.84). We show that our framework has a competitive performance compared human experts, outperforms a radiomics baseline, and performs similar or superior to Bayesian optimization and more advanced ensemble approaches. Concluding, our method fully automatically optimizes the construction of radiomics workflows, thereby streamlining the search for radiomics biomarkers in new applications. To facilitate reproducibility and future research, we publicly release six datasets, the software implementation of our framework, and the code to reproduce this study. △ Less

Submitted 29 July, 2022; v1 submitted 19 August, 2021; originally announced August 2021.

Comments: 33 pages, 4 figures, 4 tables, 2 supplementary figures, 3 supplementary table, submitted to Medical Image Analysis; revision;

A Checklist for Explainable AI in the Insurance Domain

Authors: Olivier Koster, Ruud Kosman, Joost Visser

Abstract: Artificial intelligence (AI) is a powerful tool to accomplish a great many tasks. This exciting branch of technology is being adopted increasingly across varying sectors, including the insurance domain. With that power arise several complications. One of which is a lack of transparency and explainability of an algorithm for experts and non-experts alike. This brings into question both the usefulne… ▽ More Artificial intelligence (AI) is a powerful tool to accomplish a great many tasks. This exciting branch of technology is being adopted increasingly across varying sectors, including the insurance domain. With that power arise several complications. One of which is a lack of transparency and explainability of an algorithm for experts and non-experts alike. This brings into question both the usefulness as well as the accuracy of the algorithm, coupled with an added difficulty to assess potential biases within the data or the model. In this paper, we investigate the current usage of AI algorithms in the Dutch insurance industry and the adoption of explainable artificial intelligence (XAI) techniques. Armed with this knowledge we design a checklist for insurance companies that should help assure quality standards regarding XAI and a solid foundation for cooperation between organisations. This checklist extends an existing checklist of SIVI, the standardisation institute for digital cooperation and innovation in Dutch insurance. △ Less

Submitted 18 July, 2021; originally announced July 2021.

Comments: Preprint of short paper for QUATIC 2021 conference

ACM Class: D.2

Deep Repulsive Prototypes for Adversarial Robustness

Authors: Alex Serban, Erik Poll, Joost Visser

Abstract: While many defences against adversarial examples have been proposed, finding robust machine learning models is still an open problem. The most compelling defence to date is adversarial training and consists of complementing the training data set with adversarial examples. Yet adversarial training severely impacts training time and depends on finding representative adversarial samples. In this pape… ▽ More While many defences against adversarial examples have been proposed, finding robust machine learning models is still an open problem. The most compelling defence to date is adversarial training and consists of complementing the training data set with adversarial examples. Yet adversarial training severely impacts training time and depends on finding representative adversarial samples. In this paper we propose to train models on output spaces with large class separation in order to gain robustness without adversarial training. We introduce a method to partition the output space into class prototypes with large separation and train models to preserve it. Experimental results shows that models trained with these prototypes -- which we call deep repulsive prototypes -- gain robustness competitive with adversarial training, while also preserving more accuracy on natural samples. Moreover, the models are more resilient to large perturbation sizes. For example, we obtained over 50% robustness for CIFAR-10, with 92% accuracy on natural samples and over 20% robustness for CIFAR-100, with 71% accuracy on natural samples without adversarial training. For both data sets, the models preserved robustness against large perturbations better than adversarially trained models. △ Less

Submitted 26 May, 2021; originally announced May 2021.

Adapting Software Architectures to Machine Learning Challenges

Authors: Alex Serban, Joost Visser

Abstract: Unique developmental and operational characteristics of ML components as well as their inherent uncertainty demand robust engineering principles are used to ensure their quality. We aim to determine how software systems can be (re-) architected to enable robust integration of ML components. Towards this goal, we conducted a mixed-methods empirical study consisting of (i) a systematic literature re… ▽ More Unique developmental and operational characteristics of ML components as well as their inherent uncertainty demand robust engineering principles are used to ensure their quality. We aim to determine how software systems can be (re-) architected to enable robust integration of ML components. Towards this goal, we conducted a mixed-methods empirical study consisting of (i) a systematic literature review to identify the challenges and their solutions in software architecture for ML, (ii) semi-structured interviews with practitioners to qualitatively complement the initial findings and (iii) a survey to quantitatively validate the challenges and their solutions. We compiled and validated twenty challenges and solutions for (re-) architecting systems with ML components. Our results indicate, for example, that traditional software architecture challenges (e.g., component coupling) also play an important role when using ML components; along with new ML specific challenges (e.g., the need for continuous retraining). Moreover, the results indicate that ML heightened decision drivers, such as privacy, play a marginal role compared to traditional decision drivers, such as scalability. Using the survey we were able to establish a link between architectural solutions and software quality attributes, which enabled us to provide twenty architectural tactics used to satisfy individual quality requirements of systems with ML components. Altogether, the results of the study can be interpreted as an empirical framework that supports the process of (re-) architecting software systems with ML components. △ Less

Submitted 8 January, 2022; v1 submitted 26 May, 2021; originally announced May 2021.

Comments: Published at the 29th IEEE International Conference on Software Analysis, Evolution and Reengineering (SANER 2022)

Phonon-trap** enhanced energy resolution in superconducting single photon detectors

Authors: Pieter J. de Visser, Steven A. H. de Rooij, Vignesh Murugesan, David J. Thoen, Jochem J. A. Baselmans

Abstract: A noiseless, photon counting detector, which resolves the energy of each photon, could radically change astronomy, biophysics and quantum optics. Superconducting detectors promise an intrinsic resolving power at visible wavelengths of $R=E/δE\approx100$ due to their low excitation energy. We study superconducting energy-resolving Microwave Kinetic Inductance Detectors (MKIDs), which hold particula… ▽ More A noiseless, photon counting detector, which resolves the energy of each photon, could radically change astronomy, biophysics and quantum optics. Superconducting detectors promise an intrinsic resolving power at visible wavelengths of $R=E/δE\approx100$ due to their low excitation energy. We study superconducting energy-resolving Microwave Kinetic Inductance Detectors (MKIDs), which hold particular promise for larger cameras. A visible/near-infrared photon absorbed in the superconductor creates a few thousand quasiparticles through several stages of electron-phonon interaction. Here we demonstrate experimentally that the resolving power of MKIDs at visible to near-infrared wavelengths is limited by the loss of hot phonons during this process. We measure the resolving power of our aluminum-based detector as a function of photon energy using four lasers with wavelengths between $1545-402$ nm. For detectors on thick SiN/Si and sapphire substrates the resolving power is limited to $10-21$ for the respective wavelengths, consistent with the loss of hot phonons. When we suspend the sensitive part of the detector on a 110 nm thick SiN membrane, the measured resolving power improves to $19-52$ respectively. The improvement is equivalent to a factor $8\pm2$ stronger phonon trap** on the membrane, which is consistent with a geometrical phonon propagation model for these hot phonons. We discuss a route towards the Fano limit by phonon engineering. △ Less

Submitted 11 March, 2021; originally announced March 2021.

Comments: 14 pages, 8 figures, including appendices

Journal ref: Phys. Rev. Applied 16, 034051 (2021)

Strong Reduction of Quasiparticle Fluctuations in a Superconductor due to Decoupling of the Quasiparticle Number and Lifetime

Authors: Steven A. H. de Rooij, Jochem J. A. Baselmans, Vignesh Murugesan, David J. Thoen, Pieter J. de Visser

Abstract: We measure temperature dependent quasiparticle fluctuations in a small Al volume, embedded in a NbTiN superconducting microwave resonator. The resonator design allows for read-out close to equilibrium. By placing the Al film on a membrane, we enhance the fluctuation level and separate quasiparticle from phonon effects. When lowering the temperature, the recombination time saturates and the fluctua… ▽ More We measure temperature dependent quasiparticle fluctuations in a small Al volume, embedded in a NbTiN superconducting microwave resonator. The resonator design allows for read-out close to equilibrium. By placing the Al film on a membrane, we enhance the fluctuation level and separate quasiparticle from phonon effects. When lowering the temperature, the recombination time saturates and the fluctuation level reduces a factor $\sim$100. From this we deduce that the number of free quasiparticles is still thermal. Therefore, the theoretical, inverse relation between quasiparticle number and recombination time is invalid in this experiment. This is consistent with quasiparticle trap**, where on-trap recombination limits the observed quasiparticle lifetime. △ Less

Submitted 24 November, 2021; v1 submitted 8 March, 2021; originally announced March 2021.

Comments: Main text: 5 pages, 3 figures; Supplemental material: 11 pages, 8 figures

Journal ref: Phys. Rev. B 104, L180506 (2021)

Practices for Engineering Trustworthy Machine Learning Applications

Authors: Alex Serban, Koen van der Blom, Holger Hoos, Joost Visser

Abstract: Following the recent surge in adoption of machine learning (ML), the negative impact that improper use of ML can have on users and society is now also widely recognised. To address this issue, policy makers and other stakeholders, such as the European Commission or NIST, have proposed high-level guidelines aiming to promote trustworthy ML (i.e., lawful, ethical and robust). However, these guidelin… ▽ More Following the recent surge in adoption of machine learning (ML), the negative impact that improper use of ML can have on users and society is now also widely recognised. To address this issue, policy makers and other stakeholders, such as the European Commission or NIST, have proposed high-level guidelines aiming to promote trustworthy ML (i.e., lawful, ethical and robust). However, these guidelines do not specify actions to be taken by those involved in building ML systems. In this paper, we argue that guidelines related to the development of trustworthy ML can be translated to operational practices, and should become part of the ML development life cycle. Towards this goal, we ran a multi-vocal literature review, and mined operational practices from white and grey literature. Moreover, we launched a global survey to measure practice adoption and the effects of these practices. In total, we identified 14 new practices, and used them to complement an existing catalogue of ML engineering practices. Initial analysis of the survey results reveals that so far, practice adoption for trustworthy ML is relatively low. In particular, practices related to assuring security of ML components have very low adoption. Other practices enjoy slightly larger adoption, such as providing explanations to users. Our extended practice catalogue can be used by ML development teams to bridge the gap between high-level guidelines and actual development of trustworthy ML systems; it is open for review and contribution △ Less

Submitted 1 March, 2021; originally announced March 2021.

Comments: Published at WAIN'21 - 1st Workshop on AI Engineering - Software Engineering for AI

Direct evidence for Cooper pairing without a spectral gap in a disordered superconductor above $T_{C}$

Authors: Koen M. Bastiaans, Damianos Chatzopoulos, Jian-Feng Ge, Doohee Cho, Willem O. Tromp, Jan M. van Ruitenbeek, Mark H. Fischer, Pieter J. de Visser, David J. Thoen, Eduard F. C. Driessen, Teunis M. Klapwijk, Milan P. Allan

Abstract: The idea that preformed Cooper pairs could exist in a superconductor above its zero-resistance state has been explored for unconventional, interface, and disordered superconductors, yet direct experimental evidence is lacking. Here, we use scanning tunneling noise spectroscopy to unambiguously show that preformed Cooper pairs exist up to temperatures much higher than the zero-resistance critical t… ▽ More The idea that preformed Cooper pairs could exist in a superconductor above its zero-resistance state has been explored for unconventional, interface, and disordered superconductors, yet direct experimental evidence is lacking. Here, we use scanning tunneling noise spectroscopy to unambiguously show that preformed Cooper pairs exist up to temperatures much higher than the zero-resistance critical temperature $T_{C}$ in the disordered superconductor titanium nitride, by observing a clear enhancement in the shot noise that is equivalent to a change of the effective charge from 1 to 2 electron charges. We further show that spectroscopic gap fills up rather than closes when increasing temperature. Our results thus demonstrate the existence of a novel state above $T_{C}$ that, much like an ordinary metal, has no (pseudo)gap, but carries charge via paired electrons. △ Less

Submitted 21 January, 2021; originally announced January 2021.

Journal ref: Science 374, 608 (2021)

Differential diagnosis and molecular stratification of gastrointestinal stromal tumors on CT images using a radiomics approach

Authors: Martijn P. A. Starmans, Milea J. M. Timbergen, Melissa Vos, Michel Renckens, Dirk J. Grünhagen, Geert J. L. H. van Leenders, Roy S. Dwarkasing, François E. J. A. Willemssen, Wiro J. Niessen, Cornelis Verhoef, Stefan Sleijfer, Jacob J. Visser, Stefan Klein

Abstract: Distinguishing gastrointestinal stromal tumors (GISTs) from other intra-abdominal tumors and GISTs molecular analysis is necessary for treatment planning, but challenging due to its rarity. The aim of this study was to evaluate radiomics for distinguishing GISTs from other intra-abdominal tumors, and in GISTs, predict the c-KIT, PDGFRA,BRAF mutational status and mitotic index (MI). All 247 include… ▽ More Distinguishing gastrointestinal stromal tumors (GISTs) from other intra-abdominal tumors and GISTs molecular analysis is necessary for treatment planning, but challenging due to its rarity. The aim of this study was to evaluate radiomics for distinguishing GISTs from other intra-abdominal tumors, and in GISTs, predict the c-KIT, PDGFRA,BRAF mutational status and mitotic index (MI). All 247 included patients (125 GISTS, 122 non-GISTs) underwent a contrast-enhanced venous phase CT. The GIST vs. non-GIST radiomics model, including imaging, age, sex and location, had a mean area under the curve (AUC) of 0.82. Three radiologists had an AUC of 0.69, 0.76, and 0.84, respectively. The radiomics model had an AUC of 0.52 for c-KIT, 0.56 for c-KIT exon 11, and 0.52 for the MI. Hence, our radiomics model was able to distinguish GIST from non-GISTS with a performance similar to three radiologists, but was not able to predict the c-KIT mutation or MI. △ Less

Submitted 15 October, 2020; v1 submitted 14 October, 2020; originally announced October 2020.

Comments: Martijn P.A. Starmans and Milea J.M. Timbergen contributed equally

Journal ref: J Digit Imaging (2022)

Extracting Implicitly Asserted Propositions in Argumentation

Authors: Yohan Jo, Jacky Visser, Chris Reed, Eduard Hovy

Abstract: Argumentation accommodates various rhetorical devices, such as questions, reported speech, and imperatives. These rhetorical tools usually assert argumentatively relevant propositions rather implicitly, so understanding their true meaning is key to understanding certain arguments properly. However, most argument mining systems and computational linguistics research have paid little attention to im… ▽ More Argumentation accommodates various rhetorical devices, such as questions, reported speech, and imperatives. These rhetorical tools usually assert argumentatively relevant propositions rather implicitly, so understanding their true meaning is key to understanding certain arguments properly. However, most argument mining systems and computational linguistics research have paid little attention to implicitly asserted propositions in argumentation. In this paper, we examine a wide range of computational methods for extracting propositions that are implicitly asserted in questions, reported speech, and imperatives in argumentation. By evaluating the models on a corpus of 2016 U.S. presidential debates and online commentary, we demonstrate the effectiveness and limitations of the computational models. Our study may inform future research on argument mining and the semantics of these rhetorical devices in argumentation. △ Less

Submitted 6 October, 2020; originally announced October 2020.

Comments: EMNLP 2020

Learning to Learn from Mistakes: Robust Optimization for Adversarial Noise

Authors: Alex Serban, Erik Poll, Joost Visser

Abstract: Sensitivity to adversarial noise hinders deployment of machine learning algorithms in security-critical applications. Although many adversarial defenses have been proposed, robustness to adversarial noise remains an open problem. The most compelling defense, adversarial training, requires a substantial increase in processing time and it has been shown to overfit on the training data. In this paper… ▽ More Sensitivity to adversarial noise hinders deployment of machine learning algorithms in security-critical applications. Although many adversarial defenses have been proposed, robustness to adversarial noise remains an open problem. The most compelling defense, adversarial training, requires a substantial increase in processing time and it has been shown to overfit on the training data. In this paper, we aim to overcome these limitations by training robust models in low data regimes and transfer adversarial knowledge between different models. We train a meta-optimizer which learns to robustly optimize a model using adversarial examples and is able to transfer the knowledge learned to new models, without the need to generate new adversarial examples. Experimental results show the meta-optimizer is consistent across different architectures and data sets, suggesting it is possible to automatically patch adversarial vulnerabilities. △ Less

Submitted 12 August, 2020; originally announced August 2020.

Comments: Published at ICANN 2020

GraphRepo: Fast Exploration in Software Repository Mining

Authors: Alex Serban, Magiel Bruntink, Joost Visser

Abstract: Mining and storage of data from software repositories is typically done on a per-project basis, where each project uses a unique combination of data schema, extraction tools, and (intermediate) storage infrastructure. We introduce GraphRepo, a tool that enables a unified approach to extract data from Git repositories, store it, and share it across repository mining projects. GraphRepo usesNeo4j, a… ▽ More Mining and storage of data from software repositories is typically done on a per-project basis, where each project uses a unique combination of data schema, extraction tools, and (intermediate) storage infrastructure. We introduce GraphRepo, a tool that enables a unified approach to extract data from Git repositories, store it, and share it across repository mining projects. GraphRepo usesNeo4j, an ACID-compliant graph database management system, and allows modular plug-in of components for repository extraction (drillers), analysis (miners), and export (mappers). The graph enables a natural way to query the data by removing the need for data normalisation. GraphRepo is built in Python and offers multiple ways to interface with the rich Python ecosystem and with big data solutions. The schema of the graph database is generic and extensible. Using GraphRepo for software repository mining offers several advantages versus creating project-specific infrastructure: (i) high performance for short-iteration exploration and scalability to large data sets (ii) easy distribution of extracted data(e.g., for replication) or sharing of extracted data among projects, and (iii) extensibility and interoperability. A set of benchmarks on four open source projects demonstrate that GraphRepo allows very fast querying of repository data, once extracted and indexed. More information can be found in the project's documentation (available at https://tinyurl.com/grepodoc) and in the project's repository (available at https://tinyurl.com/grrepo). A video demonstration isalso available online (https://tinyurl.com/grrepov) △ Less

Submitted 14 August, 2020; v1 submitted 11 August, 2020; originally announced August 2020.

Adversarial Examples on Object Recognition: A Comprehensive Survey

Authors: Alex Serban, Erik Poll, Joost Visser

Abstract: Deep neural networks are at the forefront of machine learning research. However, despite achieving impressive performance on complex tasks, they can be very sensitive: Small perturbations of inputs can be sufficient to induce incorrect behavior. Such perturbations, called adversarial examples, are intentionally designed to test the network's sensitivity to distribution drifts. Given their surprisi… ▽ More Deep neural networks are at the forefront of machine learning research. However, despite achieving impressive performance on complex tasks, they can be very sensitive: Small perturbations of inputs can be sufficient to induce incorrect behavior. Such perturbations, called adversarial examples, are intentionally designed to test the network's sensitivity to distribution drifts. Given their surprisingly small size, a wide body of literature conjectures on their existence and how this phenomenon can be mitigated. In this article we discuss the impact of adversarial examples on security, safety, and robustness of neural networks. We start by introducing the hypotheses behind their existence, the methods used to construct or protect against them, and the capacity to transfer adversarial examples between different machine learning models. Altogether, the goal is to provide a comprehensive and self-contained survey of this growing field of research. △ Less

Submitted 3 September, 2020; v1 submitted 7 August, 2020; originally announced August 2020.

Comments: Published in ACM CSUR. arXiv admin note: text overlap with arXiv:1810.01185

Towards Using Probabilistic Models to Design Software Systems with Inherent Uncertainty

Authors: Alex Serban, Erik Poll, Joost Visser

Abstract: The adoption of machine learning (ML) components in software systems raises new engineering challenges. In particular, the inherent uncertainty regarding functional suitability and the operation environment makes architecture evaluation and trade-off analysis difficult. We propose a software architecture evaluation method called Modeling Uncertainty During Design (MUDD) that explicitly models the… ▽ More The adoption of machine learning (ML) components in software systems raises new engineering challenges. In particular, the inherent uncertainty regarding functional suitability and the operation environment makes architecture evaluation and trade-off analysis difficult. We propose a software architecture evaluation method called Modeling Uncertainty During Design (MUDD) that explicitly models the uncertainty associated to ML components and evaluates how it propagates through a system. The method supports reasoning over how architectural patterns can mitigate uncertainty and enables comparison of different architectures focused on the interplay between ML and classical software components. While our approach is domain-agnostic and suitable for any system where uncertainty plays a central role, we demonstrate our approach using as example a perception system for autonomous driving. △ Less

Submitted 7 August, 2020; originally announced August 2020.

Comments: Published at the European Conference on Software Architecture (ECSA)

Adoption and Effects of Software Engineering Best Practices in Machine Learning

Authors: Alex Serban, Koen van der Blom, Holger Hoos, Joost Visser

Abstract: The increasing reliance on applications with machine learning (ML) components calls for mature engineering techniques that ensure these are built in a robust and future-proof manner. We aim to empirically determine the state of the art in how teams develop, deploy and maintain software with ML components. We mined both academic and grey literature and identified 29 engineering best practices for M… ▽ More The increasing reliance on applications with machine learning (ML) components calls for mature engineering techniques that ensure these are built in a robust and future-proof manner. We aim to empirically determine the state of the art in how teams develop, deploy and maintain software with ML components. We mined both academic and grey literature and identified 29 engineering best practices for ML applications. We conducted a survey among 313 practitioners to determine the degree of adoption for these practices and to validate their perceived effects. Using the survey responses, we quantified practice adoption, differentiated along demographic characteristics, such as geography or team size. We also tested correlations and investigated linear and non-linear relationships between practices and their perceived effect using various statistical models. Our findings indicate, for example, that larger teams tend to adopt more practices, and that traditional software engineering practices tend to have lower adoption than ML specific practices. Also, the statistical models can accurately predict perceived effects such as agility, software quality and traceability, from the degree of adoption for specific sets of practices. Combining practice adoption rates with practice importance, as revealed by statistical models, we identify practices that are important but have low adoption, as well as practices that are widely adopted but are less important for the effects we studied. Overall, our survey and the analysis of responses received provide a quantitative basis for assessment and step-wise improvement of practice adoption by ML teams. △ Less

Submitted 29 July, 2020; v1 submitted 28 July, 2020; originally announced July 2020.

Comments: Accepted and published at the ACM/IEEE International Symposium on Empirical Software Engineering and Measurement (ESEM) 2020

DESHIMA on ASTE: On-sky Responsivity Calibration of the Integrated Superconducting Spectrometer

Authors: Tatsuya Takekoshi, Kenichi Karatsu, Junya Suzuki, Yoichi Tamura, Tai Oshima, Akio Taniguchi, Shin'ichiro Asayama, Tom J. L. C. Bakx, Jochem J. A. Baselmans, Sjoerd Bosma, Juan Bueno, Kah Wuy Chin, Yasunori Fujii, Kazuyuki Fujita, Robert Huiting, Soh Ikarashi, Tsuyoshi Ishida, Shun Ishii, Ryohei Kawabe, Teun M. Klapwijk, Kotaro Kohno, Akira Kouchi, Nuria Llombart, Jun Maekawa, Vignesh Murugesan , et al. (14 additional authors not shown)

Abstract: We are develo** an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope.… ▽ More We are develo** an ultra-wideband spectroscopic instrument, DESHIMA (DEep Spectroscopic HIgh-redshift MApper), based on the technologies of an on-chip filter-bank and Microwave Kinetic Inductance Detector (MKID) to investigate dusty star-burst galaxies in the distant universe at millimeter and submillimeter wavelength. An on-site experiment of DESHIMA was performed using the ASTE 10-m telescope. We established a responsivity model that converts frequency responses of the MKIDs to line-of-sight brightness temperature. We estimated two parameters of the responsivity model using a set of skydip data taken under various precipitable water vapor (PWV, 0.4-3.0 mm) conditions for each MKID. The line-of-sight brightness temperature of sky is estimated using an atmospheric transmission model and the PWVs. As a result, we obtain an average temperature calibration uncertainty of $1σ=4$%, which is smaller than other photometric biases. In addition, the average forward efficiency of 0.88 in our responsivity model is consistent with the value expected from the geometrical support structure of the telescope. We also estimate line-of-sight PWVs of each skydip observation using the frequency response of MKIDs, and confirm the consistency with PWVs reported by the Atacama Large Millimeter/submillimeter Array. △ Less

Submitted 15 January, 2020; originally announced January 2020.

Comments: Accepted for publication in the Journal of Low Temperature Physics for LTD-18 special issue

Modern Antennas and Microwave Circuits -- A complete master-level course

Authors: A. B. Smolders, H. J. Visser, U. Johannsen

Abstract: Modern antenna systems include passive antenna structures, passive microwave circuits and interconnections to electronics. Therefore, the antenna engineer should have a deep understanding of antenna theory and should be able to apply microwave engineering concepts. This textbook provides all relevant material for Master-level courses in the domain of antenna systems. The book includes comprehensiv… ▽ More Modern antenna systems include passive antenna structures, passive microwave circuits and interconnections to electronics. Therefore, the antenna engineer should have a deep understanding of antenna theory and should be able to apply microwave engineering concepts. This textbook provides all relevant material for Master-level courses in the domain of antenna systems. The book includes comprehensive material on antennas and provides a solid introduction into microwave engineering, ranging from passive components to active circuits. We believe that this is the perfect mixture of know-how for a junior antenna expert. The theoretical material in this textbook can be supplemented by labs in which the students learn how to use state-of-the-art antenna and microwave design tools and test equipment, such as a vector network analyzer or a near-field scanner. Several chapters in this book can be used quite independent from each other. For example, chapter 6 can be used in a dedicated phased-array antenna course without the need to use Maxwell-based antenna theory from chapter 4. Similarly, chapter 3 on transmission lines and microwave circuits does not require deep back-ground knowledge in electromagnetics or antenna theory. △ Less

Submitted 18 February, 2022; v1 submitted 19 November, 2019; originally announced November 2019.

Comments: Updated version January 2022, Improved formulation of equations in section 2.1. In addition, an old version of chapter 3 was included in the previous release

Report number: ISBN 978-90-386-4943-6

The discovery, disappearance and re-emergence of radiation-stimulated superconductivity

Authors: T. M. Klapwijk, P. J. de Visser

Abstract: We trace the historical fate of experiment and theory of microwave-stimulated superconductivity as originally reported for constriction-type superconducting weak links. It is shown that the observed effect disappeared by improving weak links to obtain the desired Josephson-properties. Separate experiments were carried out to evaluate the validity of the proposed theory of Eliash'berg for… ▽ More We trace the historical fate of experiment and theory of microwave-stimulated superconductivity as originally reported for constriction-type superconducting weak links. It is shown that the observed effect disappeared by improving weak links to obtain the desired Josephson-properties. Separate experiments were carried out to evaluate the validity of the proposed theory of Eliash'berg for $\textit{energy-gap-enhancement}$ in superconducting films in a microwave field, without reaching a full quantitatively reliable measurement of the stimulated energy gap in a microwave-field, but convincing enough to understand the earlier deviations from the Josephson-effect. Over the same time-period microwave-stimulated superconductivity continued to be present in superconductor-normal metal-superconductor Josephson weak links. This experimental body of work was left unexplained for several decades and could only be understood properly after the microscopic theory of the proximity-effect had matured enough, including its non-equilibrium aspects. It implies that the increase in critical current in weak-link Josephson-junctions is due to an $\textit{enhancement of the phase-coherence}$ rather than to an $\textit{enhancement of the energy-gap}$ as proposed by Eliash'berg. The complex interplay between proximity-effect and the occupation of states continuous to be, in a variety of ways, at the core of the ongoing research on hybrid Josephson-junctions. The subject of radiation-enhanced superconductivity has re-emerged in the study of the power-dependence of superconducting microwave resonators, but also in the light-induced emergence of superconductivity in complex materials. △ Less

Submitted 10 February, 2020; v1 submitted 7 November, 2019; originally announced November 2019.

Comments: Comments welcome. Submitted to the Annals of Physics special issue dedicated to the 90th birthday of Eliash'berg

Journal ref: Annals of Physics, 168104 (2020)

A Composite Phononic Crystal Design for Quasiparticle Lifetime Enhancement in Kinetic Inductance Detectors

Authors: Tuomas A. Puurtinen, Karwan Rostem, Pieter J. de Visser, Ilari J. Maasilta

Abstract: A nanoscale phononic crystal filter (reflector) is designed for a kinetic inductance detector where the reflection band is matched to the quasiparticle recombination phonons with the aim to increase quasiparticle lifetime in the superconducting resonator. The inductor is enclosed by a 1 um wide phononic crystal membrane section with two simple hole patterns that each contain a partial spectral gap… ▽ More A nanoscale phononic crystal filter (reflector) is designed for a kinetic inductance detector where the reflection band is matched to the quasiparticle recombination phonons with the aim to increase quasiparticle lifetime in the superconducting resonator. The inductor is enclosed by a 1 um wide phononic crystal membrane section with two simple hole patterns that each contain a partial spectral gap for various high frequency phonon modes. The phononic crystal is narrow enough for low frequency thermal phonons to propagate unimpeded. With 3D phonon scattering simulations over a 40 dB attenuation in transmitted power is found for the crystal, which was previously estimated to give a lifetime enhancement of nearly two orders of magnitude. △ Less

Submitted 23 September, 2019; originally announced September 2019.

Comments: 7 pages, 3 figures, 18th International Workshop on Low Temperature Detectors (Milan, 2019)

First light demonstration of the integrated superconducting spectrometer

Authors: Akira Endo, Kenichi Karatsu, Yoichi Tamura, Tai Oshima, Akio Taniguchi, Tatsuya Takekoshi, Shin'ichiro Asayama, Tom J. L. C. Bakx, Sjoerd Bosma, Juan Bueno, Kah Wuy Chin, Yasunori Fujii, Kazuyuki Fujita, Robert Huiting, Soh Ikarashi, Tsuyoshi Ishida, Shun Ishii, Ryohei Kawabe, Teun M. Klapwijk, Kotaro Kohno, Akira Kouchi, Nuria Llombart, Jun Maekawa, Vignesh Murugesan, Shunichi Nakatsubo , et al. (14 additional authors not shown)

Abstract: Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pix… ▽ More Ultra-wideband 3D imaging spectrometry in the millimeter-submillimeter (mm-submm) band is an essential tool for uncovering the dust-enshrouded portion of the cosmic history of star formation and galaxy evolution. However, it is challenging to scale up conventional coherent heterodyne receivers or free-space diffraction techniques to sufficient bandwidths ($\geq$1 octave) and numbers of spatial pixels (>$10^2$). Here we present the design and first astronomical spectra of an intrinsically scalable, integrated superconducting spectrometer, which covers 332-377 GHz with a spectral resolution of $F/ΔF \sim 380$. It combines the multiplexing advantage of microwave kinetic inductance detectors (MKIDs) with planar superconducting filters for dispersing the signal in a single, small superconducting integrated circuit. We demonstrate the two key applications for an instrument of this type: as an efficient redshift machine, and as a fast multi-line spectral mapper of extended areas. The line detection sensitivity is in excellent agreement with the instrument design and laboratory performance, reaching the atmospheric foreground photon noise limit on sky. The design can be scaled to bandwidths in excess of an octave, spectral resolution up to a few thousand and frequencies up to $\sim$1.1 THz. The miniature chip footprint of a few $\mathrm{cm^2}$ allows for compact multi-pixel spectral imagers, which would enable spectroscopic direct imaging and large volume spectroscopic surveys that are several orders of magnitude faster than what is currently possible. △ Less

Submitted 18 September, 2019; v1 submitted 24 June, 2019; originally announced June 2019.

Comments: Published in Nature Astronomy. SharedIt Link to the full published paper: https://rdcu.be/bM2FN

StampNet: unsupervised multi-class object discovery

Authors: Joost Visser, Alessandro Corbetta, Vlado Menkovski, Federico Toschi

Abstract: Unsupervised object discovery in images involves uncovering recurring patterns that define objects and discriminates them against the background. This is more challenging than image clustering as the size and the location of the objects are not known: this adds additional degrees of freedom and increases the problem complexity. In this work, we propose StampNet, a novel autoencoding neural network… ▽ More Unsupervised object discovery in images involves uncovering recurring patterns that define objects and discriminates them against the background. This is more challenging than image clustering as the size and the location of the objects are not known: this adds additional degrees of freedom and increases the problem complexity. In this work, we propose StampNet, a novel autoencoding neural network that localizes shapes (objects) over a simple background in images and categorizes them simultaneously. StampNet consists of a discrete latent space that is used to categorize objects and to determine the location of the objects. The object categories are formed during the training, resulting in the discovery of a fixed set of objects. We present a set of experiments that demonstrate that StampNet is able to localize and cluster multiple overlap** shapes with varying complexity including the digits from the MNIST dataset. We also present an application of StampNet in the localization of pedestrians in overhead depth-maps. △ Less

Submitted 7 February, 2019; originally announced February 2019.

Journal ref: IEEE International Conference on Image Processing (ICIP 2019), pp. 2951-2955, 2019

Wideband on-chip terahertz spectrometer based on a superconducting filterbank

Authors: Akira Endo, Kenichi Karatsu, Alejandro Pascual Laguna, Behnam Mirzaei, Robert Huiting, David J. Thoen, Vignesh Murugesan, Stephen J. C. Yates, Juan Bueno, Nuri van Marrewijk, Sjoerd Bosma, Ozan Yurduseven, Nuria Llombart, Junya Suzuki, Masato Naruse, Pieter J. de Visser, Paul P. van der Werf, Teun M. Klapwijk, Jochem J. A. Baselmans

Abstract: Terahertz spectrometers with a wide instantaneous frequency coverage for passive remote sensing are enormously attractive for many terahertz applications, such as astronomy, atmospheric science and security. Here we demonstrate a wide-band terahertz spectrometer based on a single superconducting chip. The chip consists of an antenna coupled to a transmission line filterbank, with a microwave kinet… ▽ More Terahertz spectrometers with a wide instantaneous frequency coverage for passive remote sensing are enormously attractive for many terahertz applications, such as astronomy, atmospheric science and security. Here we demonstrate a wide-band terahertz spectrometer based on a single superconducting chip. The chip consists of an antenna coupled to a transmission line filterbank, with a microwave kinetic inductance detector behind each filter. Using frequency division multiplexing, all detectors are read-out simultaneously creating a wide-band spectrometer with an instantaneous bandwidth of 45 GHz centered around 350 GHz. The spectrometer has a spectral resolution of $F/ΔF=380$ and reaches photon-noise limited sensitivity. We discuss the chip design and fabrication, as well as the system integration and testing. We confirm full system operation by the detection of an emission line spectrum of methanol gas. The proposed concept allows for spectroscopic radiation detection over large bandwidths and resolutions up to $F/ΔF\sim1000$, all using a chip area of a few $\mathrm{cm^2}$. This will allow the construction of medium resolution imaging spectrometers with unprecedented speed and sensitivity. △ Less

Submitted 21 June, 2019; v1 submitted 21 January, 2019; originally announced January 2019.

Comments: 21 pages, 7 figures

Journal ref: Journal of Astronomical Telescopes, Instruments, and Systems, 5(3), 035004 (2019). (Open Access)

Mitigation of Cosmic Ray Effect on Microwave Kinetic Inductance Detector Arrays

Authors: K. Karatsu, A. Endo, J. Bueno, P. J. de Visser, R. Barends, D. J. Thoen, V. Murugesan, N. Tomita, J. J. A. Baselmans

Abstract: For space observatories, the glitches caused by high energy phonons created by the interaction of cosmic ray particles with the detector substrate lead to dead time during observation. Mitigating the impact of cosmic rays is therefore an important requirement for detectors to be used in future space missions. In order to investigate possible solutions, we carry out a systematic study by testing fo… ▽ More For space observatories, the glitches caused by high energy phonons created by the interaction of cosmic ray particles with the detector substrate lead to dead time during observation. Mitigating the impact of cosmic rays is therefore an important requirement for detectors to be used in future space missions. In order to investigate possible solutions, we carry out a systematic study by testing four large arrays of Microwave Kinetic Inductance Detectors (MKIDs), each consisting of $\sim$960 pixels and fabricated on monolithic 55 mm $\times$ 55 mm $\times$ 0.35 mm Si substrates. We compare the response to cosmic ray interactions in our laboratory for different detector arrays: A standard array with only the MKID array as reference; an array with a low $T_c$ superconducting film as phonon absorber on the opposite side of the substrate; and arrays with MKIDs on membranes. The idea is that the low $T_c$ layer down-converts the phonon energy to values below the pair breaking threshold of the MKIDs, and the membranes isolate the sensitive part of the MKIDs from phonons created in the substrate. We find that the dead time can be reduced up to a factor of 40 when compared to the reference array. Simulations show that the dead time can be reduced to below 1 % for the tested detector arrays when operated in a spacecraft in an L2 or a similar far-Earth orbit. The technique described here is also applicable and important for large superconducting qubit arrays for future quantum computers. △ Less

Submitted 10 January, 2019; v1 submitted 8 January, 2019; originally announced January 2019.

Comments: 5 pages, 4 figures; accepted to APL

Journal ref: Appl. Phys. Lett. 114, 032601 (2019)

Adversarial Examples - A Complete Characterisation of the Phenomenon

Authors: Alexandru Constantin Serban, Erik Poll, Joost Visser

Abstract: We provide a complete characterisation of the phenomenon of adversarial examples - inputs intentionally crafted to fool machine learning models. We aim to cover all the important concerns in this field of study: (1) the conjectures on the existence of adversarial examples, (2) the security, safety and robustness implications, (3) the methods used to generate and (4) protect against adversarial exa… ▽ More We provide a complete characterisation of the phenomenon of adversarial examples - inputs intentionally crafted to fool machine learning models. We aim to cover all the important concerns in this field of study: (1) the conjectures on the existence of adversarial examples, (2) the security, safety and robustness implications, (3) the methods used to generate and (4) protect against adversarial examples and (5) the ability of adversarial examples to transfer between different machine learning models. We provide ample background information in an effort to make this document self-contained. Therefore, this document can be used as survey, tutorial or as a catalog of attacks and defences using adversarial examples. △ Less

Submitted 17 February, 2019; v1 submitted 2 October, 2018; originally announced October 2018.

Enhanced quasiparticle lifetime in a superconductor by selective blocking of recombination phonons with a phononic crystal

Authors: K. Rostem, P. J. de Visser, E. J. Wollack

Abstract: When quasiparticles in a BCS superconductor recombine into Cooper pairs, phonons are emitted within a narrow band of energies above the pairing energy at 2$Δ$. We show that a phonon bandgap restricting the escape of recombination phonons from a superconductor can increase the quasiparticle recombination lifetime by more than an order of magnitude. A phonon bandgap can be realized and matched to th… ▽ More When quasiparticles in a BCS superconductor recombine into Cooper pairs, phonons are emitted within a narrow band of energies above the pairing energy at 2$Δ$. We show that a phonon bandgap restricting the escape of recombination phonons from a superconductor can increase the quasiparticle recombination lifetime by more than an order of magnitude. A phonon bandgap can be realized and matched to the recombination energy with a phononic crystal, a periodically-patterned dielectric membrane. We discuss in detail the non-equilibrium quasiparticle and phonon distributions that arise in a superconductor due to a phonon bandgap and a pair-breaking photon signal. Although intrinsically a non-equilibrium effect, the lifetime enhancement in the small-signal regime is remarkably similar to an estimate from an equilibrium formulation. The equilibrium estimate closely follows $\exp(Ω_{bg}/k_BT_b)$, where $Ω_{bg}$ is the phonon bandgap energy bandwidth above 2$Δ$, and $T_b$ is the phonon bath temperature of the coupled electron-phonon system. We discuss the impact of a phononic bandgap on the performance of superconducting devices, and propose a superconducting microwave resonator circuit to measure the enhancement in the quasiparticle lifetime. △ Less

Submitted 22 May, 2018; v1 submitted 17 May, 2018; originally announced May 2018.

Journal ref: Phys. Rev. B 98, 014522 (2018)

Coincidence velocity map imaging using Tpx3Cam, a time stam** optical camera with 1.5 ns timing resolution

Authors: Arthur Zhao, Martin van Beuzekom, Bram Bouwens, Dmitry Byelov, Irakli Chakaberia, Chuan Cheng, Erik Maddox, Andrei Nomerotski, Peter Svihra, Jan Visser, Vaclav Vrba, Thomas Weinacht

Abstract: We demonstrate a coincidence velocity map imaging apparatus equipped with a novel time stam** fast optical camera, Tpx3Cam, whose high sensitivity and ns timing resolution allow for simultaneous position and time-of-flight detection. This single detector design is simple, flexible and capable of highly differential measurements. We show detailed characterization of the camera and its application… ▽ More We demonstrate a coincidence velocity map imaging apparatus equipped with a novel time stam** fast optical camera, Tpx3Cam, whose high sensitivity and ns timing resolution allow for simultaneous position and time-of-flight detection. This single detector design is simple, flexible and capable of highly differential measurements. We show detailed characterization of the camera and its application in strong field ionization experiments. △ Less

Submitted 13 October, 2017; v1 submitted 19 July, 2017; originally announced July 2017.

Comments: 18 pages, 12 figures

Mutation supply and the repeatability of selection for antibiotic resistance

Authors: Thomas van Dijk, Sungmin Hwang, Joachim Krug, J. Arjan G. M. de Visser, Mark P. Zwart

Abstract: Whether evolution can be predicted is a key question in evolutionary biology. Here we set out to better understand the repeatability of evolution. We explored experimentally the effect of mutation supply and the strength of selective pressure on the repeatability of selection from standing genetic variation. Different sizes of mutant libraries of an antibiotic resistance gene, TEM-1 $β$-lactamase… ▽ More Whether evolution can be predicted is a key question in evolutionary biology. Here we set out to better understand the repeatability of evolution. We explored experimentally the effect of mutation supply and the strength of selective pressure on the repeatability of selection from standing genetic variation. Different sizes of mutant libraries of an antibiotic resistance gene, TEM-1 $β$-lactamase in Escherichia coli, were subjected to different antibiotic concentrations. We determined whether populations went extinct or survived, and sequenced the TEM gene of the surviving populations. The distribution of mutations per allele in our mutant libraries- generated by error-prone PCR- followed a Poisson distribution. Extinction patterns could be explained by a simple stochastic model that assumed the sampling of beneficial mutations was key for survival. In most surviving populations, alleles containing at least one known large-effect beneficial mutation were present. These genotype data also support a model which only invokes sampling effects to describe the occurrence of alleles containing large-effect driver mutations. Hence, evolution is largely predictable given cursory knowledge of mutational fitness effects, the mutation rate and population size. There were no clear trends in the repeatability of selected mutants when we considered all mutations present. However, when only known large-effect mutations were considered, the outcome of selection is less repeatable for large libraries, in contrast to expectations. Furthermore, we show experimentally that alleles carrying multiple mutations selected from large libraries confer higher resistance levels relative to alleles with only a known large-effect mutation, suggesting that the scarcity of high-resistance alleles carrying multiple mutations may contribute to the decrease in repeatability at large library sizes. △ Less

Submitted 6 March, 2017; originally announced March 2017.

Comments: 31pages, 9 figures

Journal ref: Physical Biology Volume 14, Number 5 2017

The Influence of Teamwork Quality on Software Team Performance

Authors: Emily Weimar, Ariadi Nugroho, Joost Visser, Aske Plaat, Martijn Goudbeek, Alexander P. Schouten

Abstract: Traditionally, software quality is thought to depend on sound software engineering and development methodologies such as structured programming and agile development. However, high quality software depends just as much on high quality collaboration within the team. Since the success rate of software development projects is low (Wateridge, 1995; The Standish Group, 2009), it is important to underst… ▽ More Traditionally, software quality is thought to depend on sound software engineering and development methodologies such as structured programming and agile development. However, high quality software depends just as much on high quality collaboration within the team. Since the success rate of software development projects is low (Wateridge, 1995; The Standish Group, 2009), it is important to understand which characteristics of interactions within software development teams significantly influence performance. Hoegl and Gemuenden (2001) reported empirical evidence for the relation between teamwork quality and software quality, using a six-factor teamwork quality (TWQ) model. This article extends the work of Hoegl and Gemuenden (2001) with the aim of finding additional factors that may influence software team performance. We introduce three new TWQ factors: trust, value sharing, and coordination of expertise. The relationship between TWQ and team performance and the improvement of the model are tested using data from 252 team members and stakeholders. Results show that teamwork quality is significantly related to team performance, as rated by both team members and stakeholders: TWQ explains 81% of the variance of team performance as rated by team members and 61% as rated by stakeholders. This study shows that trust, shared values, and coordination of expertise are important factors for team leaders to consider in order to achieve high quality software team work. △ Less

Submitted 22 January, 2017; originally announced January 2017.

Circular spectropolarimetric sensing of chiral photosystems in decaying leaves

Authors: C. H. Lucas Patty, Luuk J. J. Visser, Freek Ariese, Wybren Jan Buma, William B. Sparks, Rob J. M. van Spanning, Wilfred F. M. Röling, Frans Snik

Abstract: Circular polarization spectroscopy has proven to be an indispensable tool in photosynthesis research and (bio)-molecular research in general. Oxygenic photosystems typically display an asymmetric Cotton effect around the chlorophyll absorbance maximum with a signal $\leq 1 \%$. In vegetation, these signals are the direct result of the chirality of the supramolecular aggregates. The circular polari… ▽ More Circular polarization spectroscopy has proven to be an indispensable tool in photosynthesis research and (bio)-molecular research in general. Oxygenic photosystems typically display an asymmetric Cotton effect around the chlorophyll absorbance maximum with a signal $\leq 1 \%$. In vegetation, these signals are the direct result of the chirality of the supramolecular aggregates. The circular polarization is thus directly influenced by the composition and architecture of the photosynthetic macrodomains, and is thereby linked to photosynthetic functioning. Although ordinarily measured only on a molecular level, we have developed a new spectropolarimetric instrument, TreePol, that allows for both laboratory and in-the-field measurements. Through spectral multiplexing, TreePol is capable of fast measurements with a sensitivity of $\sim 1*10^{-4}$ and is therefore suitable of non-destructively probing the molecular architecture of whole plant leaves. We have measured the chiroptical evolution of \textit{Hedera helix} leaves for a period of 22 days. Spectrally resolved circular polarization measurements (450-900 nm) on whole leaves in transmission exhibit a strong decrease in the polarization signal over time after plucking, which we accredit to the deterioration of chiral macro-aggregates. Chlorophyll \textit{a} levels measured over the same period by means of UV-Vis absorption and fluorescence spectroscopy showed a much smaller decrease. With these results we are able to distinguish healthy from deteriorating leaves. Hereby we indicate the potency of circular polarization spectroscopy on whole and intact leaves as a nondestructive tool for structural and plant stress assessment. Additionally, we underline the establishment of circular polarization signals as remotely accessible means of detecting the presence of extraterrestrial life. △ Less

Submitted 5 January, 2017; originally announced January 2017.

Comments: 29 pages, 6 figures

Journal ref: Journal of Quantitative Spectroscopy and Radiative Transfer 189 (2017): 303-311

Detecting functional decline from normal ageing to dementia: development and validation of a short version of the Amsterdam IADL Questionnaire

Authors: Roos J. Jutten, Carel F. W. Peeters, Sophie M. J. Leijdesdorff, Pieter Jelle Visser, Andrea B. Maier, Caroline B. Terwee, Philip Scheltens, Sietske A. M. Sikkes

Abstract: INTRODUCTION: Detecting functional decline from normal ageing to dementia is relevant for diagnostic and prognostic purposes. Therefore, the Amsterdam IADL Questionnaire (A-IADL-Q) was developed: a 70-item proxy-based tool with good psychometric properties. We aimed to design a short version whilst preserving its psychometric quality. METHODS: Study partners of subjects (n=1355), ranging from cogn… ▽ More INTRODUCTION: Detecting functional decline from normal ageing to dementia is relevant for diagnostic and prognostic purposes. Therefore, the Amsterdam IADL Questionnaire (A-IADL-Q) was developed: a 70-item proxy-based tool with good psychometric properties. We aimed to design a short version whilst preserving its psychometric quality. METHODS: Study partners of subjects (n=1355), ranging from cognitively normal to dementia subjects, completed the original A-IADL-Q. We selected the short version items using a stepwise procedure combining missing data, Item Response Theory and input from respondents and experts. We investigated internal consistency of the short version as well as concordance with the original version. To assess its construct validity, we additionally investigated concordance between the short version and the Mini-Mental State Examination (MMSE) and Disability Assessment for Dementia (DAD). Lastly, we investigated differences in IADL scores between diagnostic groups across the dementia spectrum. RESULTS: We selected 30 items covering the entire spectrum of IADL functioning. Internal consistency (.98) and concordance with the original version (.97) were very high. Concordance with the MMSE (.72) and DAD (.87) scores was high. IADL impairment scores increased across the spectrum from normal cognition to dementia. DISCUSSION: The A-IADL-Q Short Version (A-IADL-Q-SV) consists of 30 items. The A-IADL-Q-SV has maintained the psychometric quality of the original A-IADL-Q. As such, it is a concise measure of functional decline. △ Less

Submitted 21 March, 2017; v1 submitted 21 October, 2016; originally announced October 2016.

Comments: 14 pages, 3 tables, 4 figures

Journal ref: Alzheimer's & Dementia: Diagnosis, Assessment & Disease Monitoring, 8 (2017): 26-35

A kilo-pixel imaging system for future space based far-infrared observatories using microwave kinetic inductance detectors

Authors: J. J. A. Baselmans, J. Bueno, S. J. C. Yates, O. Yurduseven, N. Llombart, K. Karatsu, A. M. Baryshev, L. Ferrari, A. Endo, D. J. Thoen, P. J. de Visser, R. M. J. Janssen, V. Murugesan, E. F. C. Driessen, G. Coiffard, J. Martin-Pintado, P. Hargrave, M. Griffin

Abstract: Future astrophysics and cosmic microwave background space missions operating in the far-infrared to millimetre part of the spectrum will require very large arrays of ultra-sensitive detectors in combination with high multiplexing factors and efficient low-noise and low-power readout systems. We have developed a demonstrator system suitable for such applications. The system combines a 961 pixel ima… ▽ More Future astrophysics and cosmic microwave background space missions operating in the far-infrared to millimetre part of the spectrum will require very large arrays of ultra-sensitive detectors in combination with high multiplexing factors and efficient low-noise and low-power readout systems. We have developed a demonstrator system suitable for such applications. The system combines a 961 pixel imaging array based upon Microwave Kinetic Inductance Detectors (MKIDs) with a readout system capable of reading out all pixels simultaneously with only one readout cable pair and a single cryogenic amplifier. We evaluate, in a representative environment, the system performance in terms of sensitivity, dynamic range, optical efficiency, cosmic ray rejection, pixel-pixel crosstalk and overall yield at at an observation centre frequency of 850 GHz and 20% fractional bandwidth. The overall system has an excellent sensitivity, with an average detector sensitivity NEPdet=3x10^-19 W/rt(Hz) measured using a thermal calibration source. At a loading power per pixel of 50fW we demonstrate white, photon noise limited detector noise down to 300 mHz. The dynamic range would allow the detection of 1 Jy bright sources within the field of view without tuning the readout of the detectors. The expected dead time due to cosmic ray interactions, when operated in an L2 or a similar far-Earth orbit, is found to be <4%. Additionally, the achieved pixel yield is 83% and the crosstalk between the pixels is <-30dB. This demonstrates that MKID technology can provide multiplexing ratios on the order of a 1000 with state-of-the-art single pixel performance, and that the technology is now mature enough to be considered for future space based observatories and experiments. △ Less

Submitted 1 March, 2017; v1 submitted 7 September, 2016; originally announced September 2016.

Comments: Resubmitted manuscript after review A&A (2016) 16 pages, 10 figures

Journal ref: A&A 601, A89 (2017)

Suppressed magnetic circular dichroism and valley-selective magneto-absorption due to the effective mass anisotropy in bismuth

Authors: Pieter J. de Visser, Julien Levallois, Michaël K. Tran, Jean-Marie Poumirol, Ievgeniia O. Nedoliuk, Jérémie Teyssier, Ctirad Uher, Dirk van der Marel, Alexey B. Kuzmenko

Abstract: We have measured the far-infrared reflectivity and Kerr angle spectra on a high-quality crystal of pure semimetallic bismuth as a function of magnetic field, from which we extract the conductivity for left- and right handed circular polarisations. The high spectral resolution allows us to separate the intraband Landau level transitions for electrons and holes. The hole transition exhibits 100% mag… ▽ More We have measured the far-infrared reflectivity and Kerr angle spectra on a high-quality crystal of pure semimetallic bismuth as a function of magnetic field, from which we extract the conductivity for left- and right handed circular polarisations. The high spectral resolution allows us to separate the intraband Landau level transitions for electrons and holes. The hole transition exhibits 100% magnetic circular dichroism, it appears only for one polarisation as expected for a circular cyclotron orbit. However the dichroism for electron transitions is reduced to only $13\pm 1$%, which is quantitatively explained by the large effective mass anisotropy of the electron pockets of the Fermi surface. This observation is a signature of the mismatch between the metric experienced by the photons and the electrons. It allows for a contactless measurement of the effective mass anisotropy and provides a direction towards valley polarised magneto-optical pum** with elliptically polarised light. △ Less

Submitted 2 August, 2016; v1 submitted 30 May, 2016; originally announced May 2016.

Journal ref: Phys. Rev. Lett. 117, 017402 (2016)

Spatial conductivity map** of unprotected and capped black phosphorus using microwave microscopy

Authors: Pieter J. de Visser, Rebekah Chua, Joshua O. Island, Matvey Finkel, Allard J. Katan, Holger Thierschmann, Herre S. J. van der Zant, Teun M. Klapwijk

Abstract: Thin layers of black phosphorus present an ideal combination of a 2D material with a tunable direct bandgap and high carrier mobility. However the material suffers from degradation in ambient conditions due to an oxidation reaction which involves water, oxygen and light. We have measured the spatial profile of the conductivity on flakes of black phosphorus as a function of time using scanning micr… ▽ More Thin layers of black phosphorus present an ideal combination of a 2D material with a tunable direct bandgap and high carrier mobility. However the material suffers from degradation in ambient conditions due to an oxidation reaction which involves water, oxygen and light. We have measured the spatial profile of the conductivity on flakes of black phosphorus as a function of time using scanning microwave impedance microscopy. A microwave excitation (3 GHz) allows to image a conducting sample even when covered with a dielectric layer. We observe that on bare black phosphorus, the conductivity changes drastically over the whole surface within a day. We demonstrate that the degradation process is slowed down considerably by covering the material with a 10 nm layer of hafnium oxide. It is stable for more than a week, opening up a route towards stable black phosphorus devices in which the high dielectric constant of hafnium oxide can be exploited. Covering black phosphorus with a 15 nm boron nitride flake changes the degradation process qualitatively, it is dominated by the edges of the flake indicating a diffusive process and happens on the scale of days. △ Less

Submitted 8 March, 2016; originally announced March 2016.

Comments: Accepted for publication in 2D Materials

Journal ref: 2D Materials 3, 021002 (2016)

Coherent excited states in superconductors due to a microwave field

Authors: A. V. Semenov, I. A. Devyatov, P. J. de Visser, T. M. Klapwijk

Abstract: We describe theoretically the depairing effect of a microwave field on diffusive s-wave superconductors. The ground state of the superconductor is altered qualitatively in analogy to the depairing due to a dc current. In contrast to dc-depairing the density of states acquires, for microwaves with frequency $ω_0$, steps at multiples of the photon energy $Δ\pm n\hbarω_0$ and shows an exponential-lik… ▽ More We describe theoretically the depairing effect of a microwave field on diffusive s-wave superconductors. The ground state of the superconductor is altered qualitatively in analogy to the depairing due to a dc current. In contrast to dc-depairing the density of states acquires, for microwaves with frequency $ω_0$, steps at multiples of the photon energy $Δ\pm n\hbarω_0$ and shows an exponential-like tail in the subgap regime. We show that this ac-depairing explains the measured frequency shift of a superconducting resonator with microwave power at low temperatures. △ Less

Submitted 20 July, 2016; v1 submitted 8 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. Lett. 117, 047002 (2016)

Proton radiography to improve proton radiotherapy: Simulation study at different proton beam energies

Authors: A. K. Biegun, Jun Takatsu, M-J. van Goethem, E. R. van der Graaf, M. van Beuzekom, J. Visser, S. Brandenburg

Abstract: To improve the quality of cancer treatment with protons, a translation of X-ray Computed Tomography (CT) images into a map of the proton stop** powers needs to be more accurate. Proton stop** powers determined from CT images have systematic uncertainties in the calculated proton range in a patient of typically 3-4\% and even up to 10\% in region containing bone~\cite{USchneider1995,USchneider1… ▽ More To improve the quality of cancer treatment with protons, a translation of X-ray Computed Tomography (CT) images into a map of the proton stop** powers needs to be more accurate. Proton stop** powers determined from CT images have systematic uncertainties in the calculated proton range in a patient of typically 3-4\% and even up to 10\% in region containing bone~\cite{USchneider1995,USchneider1996,WSchneider2000,GCirrone2007,HPaganetti2012,TPlautz2014,GLandry2013,JSchuemann2014}. As a consequence, part of a tumor may receive no dose, or a very high dose can be delivered in healthy ti\-ssues and organs at risks~(e.g. brain stem)~\cite{ACKnopf2013}. A transmission radiograph of high-energy protons measuring proton stop** powers directly will allow to reduce these uncertainties, and thus improve the quality of treatment. The best way to obtain a sufficiently accurate radiograph is by tracking individual protons traversing the phantom (patient)~\cite{GCirrone2007,TPlautz2014,VSipala2013}. In our simulations we have used an ideal position sensitive detectors measuring a single proton before and after a phantom, while the residual energy of a proton was detected by a BaF$_{2}$ crystal. To obtain transmission radiographs, diffe\-rent phantom materials have been irradiated with a 3x3~cm$^{2}$ scattered proton beam, with various beam energies. The simulations were done using the Geant4 simulation package~\cite{SAgostinelli2003}. In this study we focus on the simulations of the energy loss radiographs for various proton beam energies that are clinically available in proton radiotherapy. △ Less

Submitted 29 January, 2016; originally announced January 2016.

Comments: 6 pages, 6 figures, Presented at Jagiellonian Symposium on Fundamental and Applied Subatomic Physics, 7-12 June, 2015, Kraków, Poland

The non-equilibrium response of a superconductor to pair-breaking radiation measured over a broad frequency band

Authors: P. J. de Visser, S. J. C. Yates, T. Guruswamy, D. J. Goldie, S. Withington, A. Neto, N. Llombart, A. M. Baryshev, T. M. Klapwijk, J. J. A. Baselmans

Abstract: We have measured the absorption of terahertz radiation in a BCS superconductor over a broad range of frequencies from 200 GHz to 1.1 THz, using a broadband antenna-lens system and a tantalum microwave resonator. From low frequencies, the response of the resonator rises rapidly to a maximum at the gap edge of the superconductor. From there on the response drops to half the maximum response at twice… ▽ More We have measured the absorption of terahertz radiation in a BCS superconductor over a broad range of frequencies from 200 GHz to 1.1 THz, using a broadband antenna-lens system and a tantalum microwave resonator. From low frequencies, the response of the resonator rises rapidly to a maximum at the gap edge of the superconductor. From there on the response drops to half the maximum response at twice the pair-breaking energy. At higher frequencies, the response rises again due to trap** of pair-breaking phonons in the superconductor. In practice this is the first measurement of the frequency dependence of the quasiparticle creation efficiency due to pair-breaking in a superconductor. The efficiency, calculated from the different non-equilibrium quasiparticle distribution functions at each frequency, is in agreement with the measurements. △ Less

Submitted 22 May, 2015; originally announced May 2015.

Journal ref: Applied Physics Letters 106, 252602 (2015)

Equivalence of Optical and Electrical Noise Equivalent Power of Hybrid NbTiN-Al Microwave Kinetic Inductance Detectors

Authors: R. M. J. Janssen, A. Endo, P. J. de Visser, T. M. Klapwijk, J. J. A. Baselmans

Abstract: We have measured and compared the response of hybrid NbTiN-Al Microwave Kinetic Inductance Detectors (MKIDs) to changes in bath temperature and illumination by sub-mm radiation. We show that these two stimulants have an equivalent effect on the resonance feature of hybrid MKIDs. We determine an electrical NEP from the measured temperature responsivity, quasiparticle recombination time, superconduc… ▽ More We have measured and compared the response of hybrid NbTiN-Al Microwave Kinetic Inductance Detectors (MKIDs) to changes in bath temperature and illumination by sub-mm radiation. We show that these two stimulants have an equivalent effect on the resonance feature of hybrid MKIDs. We determine an electrical NEP from the measured temperature responsivity, quasiparticle recombination time, superconducting transition temperature and noise spectrum, all of which can be measured in a dark environment. For the two hybrid NbTiN-Al MKIDs studied in detail the electrical NEP is within a factor of two of the optical NEP, which is measured directly using a blackbody source. △ Less

Submitted 17 November, 2014; v1 submitted 14 August, 2014; originally announced August 2014.

Comments: 5 pages, 3 figures

Journal ref: Applied Physics Letters 105, 193504 (2014)

Anomalous response of superconducting titanium nitride resonators to terahertz radiation

Authors: J. Bueno, P. C. J. J. Coumou, G. Zheng, P. J. de Visser, T. M. Klapwijk, E. F. C. Driessen, S. Doyle, J. J. A Baselmans

Abstract: We present an experimental study of KIDs fabricated of atomic layer deposited TiN films, and characterized at radiation frequencies of $350$~GHz. The responsivity to radiation is measured and found to increase with increasing radiation powers, opposite to what is expected from theory and observed for hybrid niobium titanium nitride / aluminium (NbTiN/Al) and all-aluminium (all-Al) KIDs. The noise… ▽ More We present an experimental study of KIDs fabricated of atomic layer deposited TiN films, and characterized at radiation frequencies of $350$~GHz. The responsivity to radiation is measured and found to increase with increasing radiation powers, opposite to what is expected from theory and observed for hybrid niobium titanium nitride / aluminium (NbTiN/Al) and all-aluminium (all-Al) KIDs. The noise is found to be independent of the level of the radiation power. The noise equivalent power (NEP) improves with higher radiation powers, also opposite to what is observed and well understood for hybrid NbTiN/Al and all-Al KIDs. We suggest that an inhomogeneous state of these disordered superconductors should be used to explain these observations. △ Less

Submitted 20 August, 2014; v1 submitted 1 August, 2014; originally announced August 2014.

Evidence of a nonequilibrium distribution of quasiparticles in the microwave response of a superconducting aluminium resonator

Authors: P. J. de Visser, D. J. Goldie, P. Diener, S. Withington, J. J. A. Baselmans, T. M. Klapwijk

Abstract: In a superconductor absorption of photons with an energy below the superconducting gap leads to redistribution of quasiparticles over energy and thus induces a strong non-equilibrium quasiparticle energy distribution. We have measured the electrodynamic response, quality factor and resonant frequency, of a superconducting aluminium microwave resonator as a function of microwave power and temperatu… ▽ More In a superconductor absorption of photons with an energy below the superconducting gap leads to redistribution of quasiparticles over energy and thus induces a strong non-equilibrium quasiparticle energy distribution. We have measured the electrodynamic response, quality factor and resonant frequency, of a superconducting aluminium microwave resonator as a function of microwave power and temperature. Below 200 mK, both the quality factor and resonant frequency decrease with increasing microwave power, consistent with the creation of excess quasiparticles due to microwave absorption. Counterintuitively, above 200 mK, the quality factor and resonant frequency increase with increasing power. We demonstrate that the effect can only be understood by a non-thermal quasiparticle distribution. △ Less

Submitted 9 January, 2014; v1 submitted 20 June, 2013; originally announced June 2013.

Journal ref: Phys. Rev. Lett. 112, 047004 (2014)

Fluctuations in the electron system of a superconductor exposed to a photon flux

Authors: P. J. de Visser, J. J. A. Baselmans, J. Bueno, N. Llombart, T. M. Klapwijk

Abstract: We report on fluctuations in the electron system, Cooper pairs and quasiparticles, of a superconducting aluminium film. The superconductor is exposed to pair-breaking photons (1.54 THz), which are coupled through an antenna. The change in the complex conductivity of the superconductor upon a change in the quasiparticle number is read out by a microwave resonator. A large range in radiation power c… ▽ More We report on fluctuations in the electron system, Cooper pairs and quasiparticles, of a superconducting aluminium film. The superconductor is exposed to pair-breaking photons (1.54 THz), which are coupled through an antenna. The change in the complex conductivity of the superconductor upon a change in the quasiparticle number is read out by a microwave resonator. A large range in radiation power can be chosen by carefully filtering the radiation from a blackbody source. We identify two regimes. At high radiation power, fluctuations in the electron system caused by the random arrival rate of the photons are resolved, giving a straightforward measure of the optical efficiency (48%). At low radiation power fluctuations are dominated by excess quasiparticles, the number of which is measured through their recombination lifetime. △ Less

Submitted 18 June, 2013; originally announced June 2013.

Journal ref: Nature Communications 5, 3130 (2014)

Biological Tissue Imaging with a Position and Time Sensitive Pixelated Detector

Authors: Julia H. Jungmann, Donald F. Smith, Luke MacAleese, Ivo Klinkert, Jan Visser, Ron M. A. Heeren

Abstract: We demonstrate the capabilities of a highly parallel, active pixel detector for large-area, mass spectrometric imaging of biological tissue sections. A bare Timepix assembly (512x512 pixels) is combined with chevron microchannel plates on an ion microscope matrix-assisted laser desorption time-of-flight mass spectrometer (MALDI TOF-MS). The detector assembly registers position- and time-resolved i… ▽ More We demonstrate the capabilities of a highly parallel, active pixel detector for large-area, mass spectrometric imaging of biological tissue sections. A bare Timepix assembly (512x512 pixels) is combined with chevron microchannel plates on an ion microscope matrix-assisted laser desorption time-of-flight mass spectrometer (MALDI TOF-MS). The detector assembly registers position- and time-resolved images of multiple m/z species in every measurement frame. We prove the applicability of the detection system to bio-molecular mass spectrometry imaging on biologically relevant samples by mass-resolved images from Timepix measurements of a peptide-grid benchmark sample and mouse testis tissue slices. Mass-spectral and localization information of analytes at physiological concentrations are measured in MALDI-TOF-MS imaging experiments. We show a high spatial resolution (pixel size down to 740x740 nm2 on the sample surface) and a spatial resolving power of 6 μm with a microscope mode laser field of view of 100-335 μm. Automated, large-area imaging is demonstrated and the Timepix' potential for fast, large-area image acquisition is highlighted. △ Less

Submitted 23 May, 2013; originally announced May 2013.

Journal ref: Journal of the American Society for Mass Spectrometry, 23, 10, 1679-1688, 2012

Microwave properties of superconducting atomic-layer deposited TiN films

Authors: P. C. J. J. Coumou, M. R. Zuiddam, E. F. C. Driessen, P. J. de Visser, J. J. A. Baselmans, T. M. Klapwijk

Abstract: We have grown superconducting TiN films by atomic layer deposition with thicknesses ranging from 6 to 89 nm. This deposition method allows us to tune the resistivity and critical temperature by controlling the film thickness. The microwave properties are measured, using a coplanar-waveguide resonator, and we find internal quality factors above a million, high sheet inductances (5.2-620 pH), and pu… ▽ More We have grown superconducting TiN films by atomic layer deposition with thicknesses ranging from 6 to 89 nm. This deposition method allows us to tune the resistivity and critical temperature by controlling the film thickness. The microwave properties are measured, using a coplanar-waveguide resonator, and we find internal quality factors above a million, high sheet inductances (5.2-620 pH), and pulse response times up to 100 μs. The high normal state resistivity of the films (> 100 μΩcm) affects the superconducting state and thereby the electrodynamic response. The microwave response is modeled using a quasiparticle density of states modified with an effective pair-breaker,consistently describing the measured temperature dependence of the quality factor and the resonant frequency. △ Less

Submitted 18 December, 2012; originally announced December 2012.

Comments: This manuscript is submitted to ASC 2012 Special Issue

Journal ref: IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, VOL. 23, NO. 3, JUNE 2013

Governance of Spreadsheets through Spreadsheet Change Reviews

Authors: Miguel A. Ferreira, Joost Visser

Abstract: We present a pragmatic method for management of risks that arise due to spreadsheet use in large organizations. We combine peer-review, tool-assisted evaluation and other pre-existing approaches into a single organization-wide approach that reduces spreadsheet risk without overly restricting spreadsheet use. The method was developed in the course of several spreadsheet evaluation assignments for a… ▽ More We present a pragmatic method for management of risks that arise due to spreadsheet use in large organizations. We combine peer-review, tool-assisted evaluation and other pre-existing approaches into a single organization-wide approach that reduces spreadsheet risk without overly restricting spreadsheet use. The method was developed in the course of several spreadsheet evaluation assignments for a corporate customer. Our method addresses a number of issues pertinent to spreadsheet risks that were raised by the Sarbanes-Oxley act. △ Less

Submitted 29 November, 2012; originally announced November 2012.

Comments: 13 Pages, 1 Figure, 1 Table; Proc. European Spreadsheet Risks Int. Grp. (EuSpRIG) 2012, ISBN: 978-0-9569258-6-2

Power Handling and Responsivity of Submicron Wide Superconducting Coplanar Waveguide Resonators

Authors: R. M. J. Janssen, A. Endo, J. J. A. Baselmans, P. J. de Visser, R. Barends, T. M. Klapwijk

Abstract: The sensitivity of microwave kinetic inductance detectors (MKIDs) based on coplanar waveguides (CPWs) needs to be improved by at least an order of magnitude to satisfy the requirements for space-based terahertz astronomy. Our aim is to investigate if this can be achieved by reducing the width of the CPW to much below what has typically been made using optical lithography (> 1 μm). CPW resonators w… ▽ More The sensitivity of microwave kinetic inductance detectors (MKIDs) based on coplanar waveguides (CPWs) needs to be improved by at least an order of magnitude to satisfy the requirements for space-based terahertz astronomy. Our aim is to investigate if this can be achieved by reducing the width of the CPW to much below what has typically been made using optical lithography (> 1 μm). CPW resonators with a central line width as narrow as 300 nm were made in NbTiN using electron beam lithography and reactive ion etching. In a systematic study of quarter-wave CPW resonators with varying widths it is shown that the behavior of responsivity, noise and power handling as a function of width continues down to 300 nm. This encourages the development of narrow KIDs using Al in order to improve their sensitivity. △ Less

Submitted 4 June, 2012; originally announced June 2012.

Comments: 6 pages, 3 figures

Journal ref: J. Low Temp. Phys. 167, 354-359 (2012)