Showing 1–43 of 43 results for author: Viridi, S

Experiment and Modeling of Rice Winnowing: Granular Segregation Method in Ancient Traditions

Authors: Rahmawati Munir, Handika Dany Rahmayanti, Riri Murniati, Dui Yanto Rahman, Sparisoma Viridi, Mikrajuddin Abdullah

Abstract: Rice winnowing is a process of separation of small and large rice grains by air flow practiced since the ancient human history especially in societies where rice is the main source of carbohydrate (in Asia, Africa, and Latin America). Indeed, this process contains rich of scientific rule but has never been documented by the old society. We report here experimental investigation of the rice winnowi… ▽ More Rice winnowing is a process of separation of small and large rice grains by air flow practiced since the ancient human history especially in societies where rice is the main source of carbohydrate (in Asia, Africa, and Latin America). Indeed, this process contains rich of scientific rule but has never been documented by the old society. We report here experimental investigation of the rice winnowing and develop a physical model to explain the process of segregation of rice grains having different size or density. Flap** the tray in the winnowing process, generates a vortex centered at position around the tray free end. We demonstrated numerically that the effectiveness of segregation is strongly depended on the different in grain sizes (for grain from the same material), the initial position of the grain, and the angular velocity of the vortex generated by flap** the tray. We obtained a phase diagram describing different final conditions of winnowing process (either the small grains move towards the tray fee end or move toward the inner end of the tray, able or unable to leave the tray at the free end). The result can be useful to design a new method in separating grains based on size or density. △ Less

Submitted 24 October, 2018; originally announced October 2018.

Comments: 24 pages, 9 figures

Second Order Phase Transition and Universality of Self-Buckled Elastic Slender Columns

Authors: Desyana Olenka Margaretta, Nadya Amalia, Fisca Dian Utami, Sparisoma Viridi, Mikrajuddin Abdullah

Abstract: Self-buckling is an interesting phenomenon that is easily found around us, either in nature or in objects made by human. Palm fronds which initially directed upward when they were short and turned into bending after appreciably longer is an example of the self-buckling phenomenon. We report here that the self-buckling of columns can be treated as a process of second order phase transition by consi… ▽ More Self-buckling is an interesting phenomenon that is easily found around us, either in nature or in objects made by human. Palm fronds which initially directed upward when they were short and turned into bending after appreciably longer is an example of the self-buckling phenomenon. We report here that the self-buckling of columns can be treated as a process of second order phase transition by considering the straight column as disorder state, the bending column as order state, and the temperature as the inverse of column length. The critical temperature corresponds to the inverse of critical length for buckling, 1/Lcr, and the deviation angle made by column free end relative to vertical direction satisfies a scaling relationship with a scaling power of 0.485. Changing of the column geometry from the vertically upward to the bending state can be considered as a transition from disorder state to order state. △ Less

Submitted 30 October, 2019; v1 submitted 11 October, 2018; originally announced October 2018.

Comments: Accepted for publication in Journal of Taibah University for Science 23 pages, 6 figures

Modeling and Characterization of Charged Particle Trajectories in an Oscillating Magnetic Field

Authors: Dani Irawan, Sparisoma Viridi, Siti Nurul Khotimah, Fourier Dzar Eljabbar Latief, Novitrian

Abstract: A constant magnetic field has frequently been discussed and has been known that it can cause a charged particle to form interesting trajectories such as cycloid and helix in presence of electric field, but a changing magnetic field is rarely discussed. In this work, modeling and characterization of charged particle trajectories in oscillating magnetic field is reported. The modeling is performed u… ▽ More A constant magnetic field has frequently been discussed and has been known that it can cause a charged particle to form interesting trajectories such as cycloid and helix in presence of electric field, but a changing magnetic field is rarely discussed. In this work, modeling and characterization of charged particle trajectories in oscillating magnetic field is reported. The modeling is performed using Euler method with speed corrector. The result shows that there are two types of trajectory patterns that will recur for every $180 n T_0$ ($n = 0, 1, 2, ..$) in increasing of magnetic field oscillation period, where $T_0$ is about $6.25\times10^{-7}$ s. △ Less

Submitted 19 November, 2014; originally announced April 2015.

Comments: 6 pages, 13 figures, conference paper

Journal ref: AIP Conference Proceedings 1656, 060009 (2015)

Growth of Smaller Grain Attached on Larger One: Algorithm to Overcome Unphysical Overlap between Grain

Authors: Acep Purqon, Sparisoma Viridi

Abstract: As a smaller grain, which is attached on larger one, is growing, it pushes also the larger one and other grains in its surrounding. In a simulation of similar system, repulsive force such as contact force based on linear spring-dashpot model can not accommodate this situation when cell growing rate is faster than simulation time step, since it produces sudden large overlap between grains that make… ▽ More As a smaller grain, which is attached on larger one, is growing, it pushes also the larger one and other grains in its surrounding. In a simulation of similar system, repulsive force such as contact force based on linear spring-dashpot model can not accommodate this situation when cell growing rate is faster than simulation time step, since it produces sudden large overlap between grains that makes unphysical result. An algorithm that preserves system linear momentum by introducing additional velocity induced by cell growth is presented in this work. It should be performed in an implicit step. The algorithm has successfully eliminated unphysical overlap. △ Less

Submitted 1 November, 2014; originally announced November 2014.

Comments: 6 pages, 4 figures, conference paper (ICMNS 2014, 2-3 November 2014, Bandung, Indonesia)

Report number: 914/AL-J/DIPA/PN/SPK/2014/RIK-ITB

Journal ref: AIP Conference Proceedings 1677, 060017 (2015)

Studying Brazil-Nut Effect History Line using Disk-Formed Objects, Scanner, and Web Browser

Authors: Sparisoma Viridi, Siti Nurul Khotimah, Novitrian, Widayani, Luman Haris, Dimas Praja Purwa Aji

Abstract: Grains configuration snapshots of Brazil-nut effect (BNE) in two-dimension are physically modeled using disk-formed objects, e.g., buttons and magnetic pin. These BNE configurations are artificially designed to mimic the real ones observed in experiments. A computer scanner is used to capture the configurations. Obtained images are then digitized using web browser running a HTML equipped with a Ja… ▽ More Grains configuration snapshots of Brazil-nut effect (BNE) in two-dimension are physically modeled using disk-formed objects, e.g., buttons and magnetic pin. These BNE configurations are artificially designed to mimic the real ones observed in experiments. A computer scanner is used to capture the configurations. Obtained images are then digitized using web browser running a HTML equipped with a JavaScript code, which is built mainly only for this work. From digitization process all grains positions (granular bed and intruder) are obtained, which is later analyzed using the simplest model, i.e., potential energy. Since the minimum energy principle (MEP) suggests that a closed system should go to its state with minimum internal energy, our BNE system must also obey it. Evolution of only the intruder seems to violate MEP but not for the whole system. Grains compaction plays important role, so that the system can achieve its configuration with minimum potential energy. △ Less

Submitted 7 August, 2014; originally announced September 2014.

Comments: 4 pages, 7 figures, submitted to International Conference on Advances in Education Technology (ICAET 2014)

Report number: 876/AL-J/DIPA/PN/SPK/2014/Desentralisasi-DIKTI

Journal ref: Proceedings of International Conference on Advances in Education Technology (ICAET 2014), Bandung, Indonesia, 16-17 October 2014, pp. 162-165

Energy Conversion in Lifting Mass Vertically using a DC Electric Motor by Observing Required Time to Lift Object for a Certain Height

Authors: Sparisoma Viridi, Acep Purqon, Sidik Permana, Wahyu Srigutomo, Anggie Susilawati, Bebeh Wahid Nuryadin, Nurhasan

Abstract: In lifting mass vertically using a DC electric motor energy conversion from electric energy, through intermediate kinetic energy, to gravitation potential energy shows that time required Δt to lift load mass m for height h is dependent quadratically to m. Several approaches to explain the experiment observation are discussed in this work, from ideal energy conversion to numerical solution from dif… ▽ More In lifting mass vertically using a DC electric motor energy conversion from electric energy, through intermediate kinetic energy, to gravitation potential energy shows that time required Δt to lift load mass m for height h is dependent quadratically to m. Several approaches to explain the experiment observation are discussed in this work, from ideal energy conversion to numerical solution from differential equation. △ Less

Submitted 30 July, 2014; originally announced August 2014.

Comments: 4 pages, 5 figures, submitted to Jurnal Pengajaran Fisika Sekolah Menengah

Monte Carlo Based Toy Model for Fission Process

Authors: R. Kurniadi, A. Waris, S. Viridi

Abstract: Fission yield has been calculated notoriously by two calculations approach, macroscopic approach and microscopic approach. This work will proposes another calculation approach which the nucleus is treated as a toy model. The toy model of fission yield is a preliminary method that use random number as a backbone of the calculation. Because of nucleus as a toy model hence the fission process does no… ▽ More Fission yield has been calculated notoriously by two calculations approach, macroscopic approach and microscopic approach. This work will proposes another calculation approach which the nucleus is treated as a toy model. The toy model of fission yield is a preliminary method that use random number as a backbone of the calculation. Because of nucleus as a toy model hence the fission process does not represent real fission process in nature completely. Fission event is modeled by one random number. The number is assumed as width of distribution probability of nucleon position in compound nuclei when fission process is started. The toy model is formed by Gaussian distribution of random number that randomizes distance like between particle and central point. The scission process is started by smashing compound nucleus central point into two parts that are left central and right central points. These three points have different Gaussian distribution parameters such as mean (μCN, μL, μR), and standard deviation (σCN, σL ,σR). By overlaying of three distributions, the number of particles ( NL, NR) that they are trapped by central points is obtained. This process is iterated until ( NL, NR) become constant numbers. The yield is determined from portion of nuclei distribution which is proportional with portion of mass numbers. Smashing process is repeated by changing σL and σR randomly △ Less

Submitted 1 July, 2014; originally announced July 2014.

Comments: 10 pages

Journal ref: AIP Conference Proceedings 1615, 133-136 (2014)

Two-dimension tissue growth model based on circular granular cells for cells with small overlap

Authors: Sparisoma Viridi, Siti Nurul Khotimah, Devi Aprianti, Luman Haris, Freddy Haryanto

Abstract: Tissue growth can be modeled in two dimension by only using circular granular cells, which can grow and produce child. Linear spring-dashpot model is used to bind the cells with a cut-off interaction range of 1.1 times sum of radii of interacted cells. Simulation steps must be divided into explicit and implicit ones due to cell growing stage and cell position rearrangement. This division is aimed… ▽ More Tissue growth can be modeled in two dimension by only using circular granular cells, which can grow and produce child. Linear spring-dashpot model is used to bind the cells with a cut-off interaction range of 1.1 times sum of radii of interacted cells. Simulation steps must be divided into explicit and implicit ones due to cell growing stage and cell position rearrangement. This division is aimed to avoid simulation problem. Only in the explicit steps time changes is performed. Large cells overlap is chosen as termination condition of tissue growth. Only some cells configuration can growth to infinite time without encountering the large cells overlap. These configurations, and the other also, are presented in this work. Simulation time $t$ increases as cell number $N$ increases due to raise of interaction number between two cells. Linear and network configurations tend to aligned with different asymtotic function, that relates $N$ and $t$, for large $N$. △ Less

Submitted 20 May, 2014; v1 submitted 26 March, 2014; originally announced March 2014.

Comments: 17 pages, 12 figures, 2 tables

Lup-Like Cantilever Beam for Small Deflection

Authors: Sparisoma Viridi, Mitra Djamal, Yusaku Fujii

Abstract: A lup-like cantilever beam are discussed in this work. For small deflection it can be approximated as a spring-mass system with certain spring constant whose effective mass is larger than the usual constant rectangular cross section cantilever beam. A new parameter $β$ is introduced to relates some the properties of lup-like cantilever beam to the usual one. Influence of beam witdh $B_0$ and head… ▽ More A lup-like cantilever beam are discussed in this work. For small deflection it can be approximated as a spring-mass system with certain spring constant whose effective mass is larger than the usual constant rectangular cross section cantilever beam. A new parameter $β$ is introduced to relates some the properties of lup-like cantilever beam to the usual one. Influence of beam witdh $B_0$ and head width $B_t$ to value of $β$ is also presented. △ Less

Submitted 23 February, 2014; v1 submitted 19 February, 2014; originally announced February 2014.

Comments: 10 pages, 3 figures

Measuring Quasi-Static and Kinetic Coefficient of Restitution Simultaneously using Levitation Mass Method: Experiment and Simulation

Authors: Mitra Djamal, Irfa Aji Prayogi, Kazuhide Watanabe, Akihiro Takita, Yusaku Fujii, Sparisoma Viridi

Abstract: Observed peaks in a levitation mass method (LMM), which are usually addressed to signal noise, are discussed in this work. This phenomenon arises due to bounce from plate which is collided by moving part in LMM measurement system. Normally, the moving part and the plate stick very good after their first contact. Simulation using molecular dynamics (MD) method is performed to prove the bounce progn… ▽ More Observed peaks in a levitation mass method (LMM), which are usually addressed to signal noise, are discussed in this work. This phenomenon arises due to bounce from plate which is collided by moving part in LMM measurement system. Normally, the moving part and the plate stick very good after their first contact. Simulation using molecular dynamics (MD) method is performed to prove the bounce prognosis. △ Less

Submitted 10 February, 2014; originally announced February 2014.

Comments: 10 pages, 7 figures

Study Of Internal Response Of Epoxy Due To Compressive Load Via Experiment And Simulation Using Abaqus FEA Software

Authors: Irfan Dwi Aditya, Widayani, Sparisoma Viridi, Siti Nurul Khotimah

Abstract: Epoxy is widely used primarily as a matrix material in the manufacture of polymer matrix composite. Epoxy behavior under compression load has to be understood before the mechanical behavior of polymer matrix composite can be accurately predicted. Simulation model combined with experiment and image analysis have been used to investigate internal response of epoxy polymeric materials subjected to co… ▽ More Epoxy is widely used primarily as a matrix material in the manufacture of polymer matrix composite. Epoxy behavior under compression load has to be understood before the mechanical behavior of polymer matrix composite can be accurately predicted. Simulation model combined with experiment and image analysis have been used to investigate internal response of epoxy polymeric materials subjected to compressive loads. In the experiment, small carbon-based material rods are inserted in the epoxy. The samples are held in one side and subjected to compressive load on the other side. All the samples swell at load sides. Image analysis on the carbon-based rods figures out the internal response, which seems to be isotropy in lateral direction. The results are compared to simulation results. The simulation is conducted using Abaqus FEA software. Similar condition is obtained when a brittle thin material is stuck to the top of simulation model. Keywords: Abaqus FEA, compression, epoxy, polymer matrix composites △ Less

Submitted 14 December, 2013; originally announced December 2013.

Comments: 4 pages, 6 figures, conference paper (presented in the 2013 International Conference on Advanced Materials Science and Technology (ICAMST 2013), Yogyakarta, Indonesia, September 17-18, 2013), (submitted to Advanced Materials Research)

Report number: 122.64/AL-J/DIPA/PN/SPK/2013/RIK-ITB-Batch-2

Journal ref: Advanced Materials Research 896 (8), 549-552 (2014)

Molecular Dynamics Simulation of Soft Grains: Malaria-Infected Red Blood Cells Motion within Obstructed 2-D Capillary Vessel

Authors: Luman Haris, Siti Nurul Khotimah, Freddy Haryanto, Sparisoma Viridi

Abstract: Molecular dynamics has been widely used to numerically solve equation of motion of classical many-particle system. It can be used to simulate many systems including biophysics, whose complexity level is determined by the involved elements. Based on this method, a numerical model had been constructed to mimic the behaviour of malaria-infected red blood cells within capillary vessel. The model was g… ▽ More Molecular dynamics has been widely used to numerically solve equation of motion of classical many-particle system. It can be used to simulate many systems including biophysics, whose complexity level is determined by the involved elements. Based on this method, a numerical model had been constructed to mimic the behaviour of malaria-infected red blood cells within capillary vessel. The model was governed by three forces namely Coulomb force, normal force, and Stokes force. By utilizing two dimensional four-cells scheme, theoretical observation was carried out to test its capability. Although the parameters were chosen deliberately, all of the quantities were given arbitrary value. Despite this fact, the results were quite satisfactory. Combined with the previous results, it can be said that the proposed model were sufficient enough to mimic the malaria-infected red blood cells motion within obstructed capillary vessel. Keywords: molecular dynamics, two-dimensional model, red-blood cell motion, malaria △ Less

Submitted 14 December, 2013; originally announced December 2013.

Comments: 4 pages, 4 figures, 3 table, conference paper (presented the International Symposium on BioMathematics (Symomath) 2013, October 27-29, 2013, Bandung, Indonesia)

Report number: 241/I.1.C01/PL/2013/RIK-ITB

Journal ref: AIP Conference Proceedings 1587 (1), 43-46 (2014)

Application of Computational Physics: Blood Vessel Constrictions and Medical Infuses

Authors: Suprijadi, Mohamad Rendi, Petrus Subekti, Sparisoma Viridi

Abstract: Application of computation in many fields are growing fast in last two decades. Increasing on computation performance helps researchers to understand natural phenomena in many fields of science and technology including in life sciences. Computational fluid dynamic is one of numerical methods which is very popular used to describe those phenomena. In this paper we propose moving particle semi-impli… ▽ More Application of computation in many fields are growing fast in last two decades. Increasing on computation performance helps researchers to understand natural phenomena in many fields of science and technology including in life sciences. Computational fluid dynamic is one of numerical methods which is very popular used to describe those phenomena. In this paper we propose moving particle semi-implicit (MPS) and molecular dynamics (MD) to describe different phenomena in blood vessel. The effect of increasing the blood pressure on vessel wall will be calculate using MD methods, while the two fluid blending dynamics will be discussed using MPS. Result from the first phenomenon shows that around 80% of constriction on blood vessel make blood vessel increase and will start to leak on vessel wall, while from the second phenomenon the result shows the visualization of two fluids mixture (drugs and blood) influenced by ratio of drugs debit to blood debit. Keywords: molecular dynamic, blood vessel, fluid dynamic, moving particle semi implicit. △ Less

Submitted 14 December, 2013; originally announced December 2013.

Comments: 4 pages, 7 figures, conference paper (presented in The International Symposium on BioMathematics (Symomath) 2013, October 27-29, 2013, Bandung, Indonesia)

Journal ref: AIP Conference Proceedings 1587 (1), 3-6 (2014)

Study on Antibody-Virus Interaction using Molecular Dynamics: Two Dimensional Simulation on Immunoglobulin Reaction against Human Papillomavirus

Authors: Luman Haris, Sony Suhandono, Siti Nurul Khotimah, Freddy Haryanto, Sparisoma Viridi

Abstract: Human Papillomavirus (HPV) has been known as one of the cause of virus-induced cancer such as cervical cancer and carcinoma. Among other types of cancer, this type has higher chance in being prevented earlier. The main idea is to eradicate the virus as soon as it enters the body by marking it with antibodies; signaling the immune system to dispose of it. However, the antibodies must be trained to… ▽ More Human Papillomavirus (HPV) has been known as one of the cause of virus-induced cancer such as cervical cancer and carcinoma. Among other types of cancer, this type has higher chance in being prevented earlier. The main idea is to eradicate the virus as soon as it enters the body by marking it with antibodies; signaling the immune system to dispose of it. However, the antibodies must be trained to recognize the virus. They can be trained by inserting an object similar to the virus allowing them to learn to recognize and surround the inserted object. In response to this, molecular dynamics simulation was chosen to study the antibody-virus interaction. In this work, two-dimensional case that involves HPV and immunoglobulin (Ig) was studied and observed. Two types of objects will be defined; one stands for HPV while another stands for antibodies. The interaction between the two objects will be governed by two forces; Coulomb force and repulsive contact force. Through the definition of some rules and condition, the antibodies' motion was observed. The influence of antibody concentration, and the antibody's type and their appearance sequence were observed both quantitatively and visually. Keywords: antibody-virus interaction, molecular dynamics, HPV, immunoglobulin. △ Less

Submitted 18 November, 2013; originally announced November 2013.

Comments: 5 pages, 4 figures, 4 table, conference paper (submitted to the 13th Asia-Oceania Congress of Medical Physics (AOCMP) & 11th South-East Asian Congress of Medical Physics (SEACOMP) to be held on 12-14 December 2013 in Singapore)

Report number: 241/I.1.C01/PL/2013/RIK-ITB, 248/I.1.C01/PL/2013/RIK-ITB

Self-Motion Mechanism Of Chained Spherical Grains Cells

Authors: Sparisoma Viridi, Nuning Nuraini

Abstract: Cells are modeled with spherical grains connected each other. Each cell can shrink and swell by transporting its fluid content to other connected neighbor while still maintaining its density at constant value. As a spherical part of a cell swells it gains more pressure from its surrounding, while shrink state gains less pressure. Pressure difference between these two or more parts of cell will cre… ▽ More Cells are modeled with spherical grains connected each other. Each cell can shrink and swell by transporting its fluid content to other connected neighbor while still maintaining its density at constant value. As a spherical part of a cell swells it gains more pressure from its surrounding, while shrink state gains less pressure. Pressure difference between these two or more parts of cell will create motion force for the cell. For simplicity, cell is considered to have same density as its environment fluid and connections between parts of cell are virtually accommodated by a spring force. This model is also limited to 2-d case. Influence of parameters to cell motion will be presented. One grain cell shows no motion, while two and more grains cell can perform a motion. △ Less

Submitted 27 October, 2013; originally announced October 2013.

Comments: 4 pages, 6 figures, 1 table, conference paper (Submitted to The International Symposium on BioMathematics (Symomath) 2013, October 27-29, 2013, Bandung, Indonesia)

Report number: 248/I.1.C01/PL/2013/RIK-ITB

Journal ref: AIP Conference Proceedings 1587 (1), 123-126 (2014)

A Simple Viscometer for High School and First Years Undergraduate Program Students: Theory and Experiment

Authors: Sparisoma Viridi, Sidik Permana, Wahyu Srigutomo, Anggie Susilawati, Acep Purqon

Abstract: A simple viscometer consists of mineral water bottle and trink straw is used to predict vicosity of water. A model is derived from Bernoulli's principle and Poiseulli's law. Value about 0.374 - 0.707 cP is obtained for observation in room temperature. About 10 minutes of observation time is needed to get the data. Keywords: equation of continuity, Bernoulli's equation, viscosity coefficient, Poi… ▽ More A simple viscometer consists of mineral water bottle and trink straw is used to predict vicosity of water. A model is derived from Bernoulli's principle and Poiseulli's law. Value about 0.374 - 0.707 cP is obtained for observation in room temperature. About 10 minutes of observation time is needed to get the data. Keywords: equation of continuity, Bernoulli's equation, viscosity coefficient, Poiseulli flow. △ Less

Submitted 29 January, 2014; v1 submitted 27 October, 2013; originally announced October 2013.

Comments: 4 pages, 6 figures, 1 table, conference paper (Seminar Kontribusi Fisika 2013, 2-3 Desember 2013, Bandung, Indonesia)

Report number: 248/I.1.C01/PL/2013/RIK-ITB

Model and Visualization of Ray Tracing using JavaScript and HTML5 for TIR Measurement System Equipped with Equilateral Right Angle Prism

Authors: Sparisoma Viridi, Hendro

Abstract: Trace of ray deviated by a prism, which is common in a TIR (total internal reflection) measurement system, is sometimes difficult to manage, especially if the prism is an equilateral right angle prism (ERAP). The point where the ray is reflected inside the right-angle prism is also changed as the angle of incident ray changed. In an ATR (attenuated total reflectance) measurement system, range of t… ▽ More Trace of ray deviated by a prism, which is common in a TIR (total internal reflection) measurement system, is sometimes difficult to manage, especially if the prism is an equilateral right angle prism (ERAP). The point where the ray is reflected inside the right-angle prism is also changed as the angle of incident ray changed. In an ATR (attenuated total reflectance) measurement system, range of this point determines size of sample. Using JavaScript and HTML5 model and visualization of ray tracing deviated by an ERAP is perform and reported in this work. Some data are obtained from this visualization and an empirical relations between angle of incident ray source θ_S, angle of ray detector hand θ_D, and angle of ray detector θ'_D are presented for radial position of ray source R_S, radial position of ray detector R_D, height of right-angle prism t, and refractive index of the prism n. Keywords: deviation angle, equilateral right angle prism, total internal reflection, JavaScript, HTML5. △ Less

Submitted 11 October, 2013; originally announced October 2013.

Comments: 10 pages, 5 figures, conference paper

Report number: 248/I.1.C01/PL/2013/RIK-ITB

Novel Giant Magnetoresistance Model using Multiple Barrier Potential

Authors: Christian Naa, Suprijadi, Sparisoma Viridi, Mitra Djamal

Abstract: This paper proposes a new model for Giant Magnetoresistance (GMR) and calculates its typical graph qualitatively. The model foundation is the microscopic mechanism in GMR, where the GMR effect can be explained by intrinsic and extrinsic potential. The potentials are spin-dependent. The potentials determine the transmission probability then it will give conductance value. Here, the multiple barrier… ▽ More This paper proposes a new model for Giant Magnetoresistance (GMR) and calculates its typical graph qualitatively. The model foundation is the microscopic mechanism in GMR, where the GMR effect can be explained by intrinsic and extrinsic potential. The potentials are spin-dependent. The potentials determine the transmission probability then it will give conductance value. Here, the multiple barrier potential model is proposed as the new GMR model. The transmission probability is determined using transfer matrix method. It was found that this model is fit qualitatively with the typical GMR graph. △ Less

Submitted 6 September, 2013; v1 submitted 4 September, 2013; originally announced September 2013.

Comments: 4 pages, 9 figures, Submitted to ARPN Journal of Engineering and Applied Sciences 2013

An Observation of a Circular Motion using Ordinary Appliances: Train Toy, Digital Camera, and Android based Smartphone

Authors: Sparisoma Viridi, Tarex Moghrabi, Meldawati Nasri

Abstract: Using a digital camera (Sony DSC-S75) in its video mode and a smartphone (Samsung GT-N700) equipped with an acceleration sensor, observation of a uniform circular motion of a toy train (Thomas & Friends, Player World, CCF No. 2277-13) is conducted. From the first observation average centripetal acceleration about 0.154 m/s2 is obtained, while the second gives 0.350 m/s2 of average centripetal acce… ▽ More Using a digital camera (Sony DSC-S75) in its video mode and a smartphone (Samsung GT-N700) equipped with an acceleration sensor, observation of a uniform circular motion of a toy train (Thomas & Friends, Player World, CCF No. 2277-13) is conducted. From the first observation average centripetal acceleration about 0.154 m/s2 is obtained, while the second gives 0.350 m/s2 of average centripetal acceleration by assuming ideal condition, where measured accelerations in z direction is not interpreted. △ Less

Submitted 9 July, 2013; originally announced July 2013.

Comments: 7 pages, 3 figures, conference paper (SNIPS 2013)

Report number: 248/I.1.C01/PL/2013/RIK-ITB

Modeling Of Blood Vessel Constriction In 2-D Case Using Molecular Dynamics Method

Authors: Mohamad Rendi, Suprijadi, Sparisoma Viridi

Abstract: Blood vessel constriction is simulated with particle-based method using a molecular dynamics authoring software known as Molecular Workbench (WM). Blood flow and vessel wall, the only components considered in constructing a blood vessel, are all represented in particle form with interaction potentials: Lennard-Jones potential, push-pull spring potential, and bending spring potential. Influence of… ▽ More Blood vessel constriction is simulated with particle-based method using a molecular dynamics authoring software known as Molecular Workbench (WM). Blood flow and vessel wall, the only components considered in constructing a blood vessel, are all represented in particle form with interaction potentials: Lennard-Jones potential, push-pull spring potential, and bending spring potential. Influence of medium or blood plasma is accommodated in plasma viscosity through Stokes drag force. It has been observed that pressure p is increased as constriction c is increased. Leakage of blood vessel starts at 80 % constriction, which shows existence of maximum pressure that can be overcome by vessel wall. △ Less

Submitted 25 June, 2013; originally announced June 2013.

Comments: 3 pages, 4 figure, conference paper of 4th ICMNS, November 8-9, 2012, Bandung, Indonesia

Journal ref: AIP Conference Proceedings 1589 (1), 404-406 (2014)

Measuring Leaf Chlorophyll Concentration from Its Color: A Way in Monitoring Environment Change to Plantations

Authors: Muhammad Abdul Hakim Shibghatallah, Siti Nurul Khotimah, Sony Suhandono, Sparisoma Viridi, Teja Kesuma

Abstract: Leaf colors of a plant can be used to identify stress level due to its adaptation to environmental change. For most leaves green-related colors are sourced from chlorophyll a and b. Chlorophyll concentration is normally measured using a spectrophotometer in laboratory. In some remote observation places, it is impossible to collect the leaves, preserve them, and bring them to laboratory to measure… ▽ More Leaf colors of a plant can be used to identify stress level due to its adaptation to environmental change. For most leaves green-related colors are sourced from chlorophyll a and b. Chlorophyll concentration is normally measured using a spectrophotometer in laboratory. In some remote observation places, it is impossible to collect the leaves, preserve them, and bring them to laboratory to measure their chlorophyll content. Based on this need, measurement of chlorophyll content is observed through its color. Using CIE chromaticity diagram leaf color information in RGB is transformed into wavelength (in nm). Paddy seed with variety name IR-64 is used in observation during its vegetation stage t (age of 0-10 days). Light exposure time τ is chosen as environmental change, which normally should be about 12 hours/day, is varied (0-12 hours/day). Each day sample from different exposure time is taken, its color is recorded using HP Deskjet 1050 scanner with 1200 dpi, and its chlorophyll content is obtained from absorption spectrum measured using Campspec M501 Single Beam UV/Vis Spectrophotometer after it is rinsed in 85 % acetone solution and the information from the spectrum is calculated using Arnon method. It has been observed that average wavelength of leaf color λavg is decreased from 570.55 nm to 566.01 nm as is measured for t = 1 - 10 days with τ = 9 hours/day, but chlorophyll concentration C is increased from 0.015 g/l to 3.250 g/l and from 0.000 g/l to 0.774 g/l for chlorophyll a and b, respectively. Other value of τ gives similar results. Based on these results an empirical relation between concentration of chlorophyll a Cc-a and its wavelength λavg can be formulated. △ Less

Submitted 25 July, 2013; v1 submitted 6 May, 2013; originally announced May 2013.

Comments: 8 pages, 5 figures, conferene paper to be presented in Padjadjaran International Physics Symposium 2013 (PIPS 2013), 7-8 May 2013, Jatinangor, Indonesia

Report number: 241/I.1.C01/PL/2013/RIK-ITB

Journal ref: AIP Conference Proceedings 1554 (1), 210-213 (2013)

SCSPG (Semi-Circle Segmented Path Generator): How to Use and an Example in Calculating Work of Friction along Curved Path

Authors: Sparisoma Viridi, Siti Nurul Khotimah

Abstract: A program called SCSPG (Semi-Circle Segmented Path Generator) is presented in this report. How it works is described and an example of it is illustrated using a case of work of friction along a curved path. As a benchmark for the program, work of friction along straight path is calculated and then compared to theoretical prediction. A program called SCSPG (Semi-Circle Segmented Path Generator) is presented in this report. How it works is described and an example of it is illustrated using a case of work of friction along a curved path. As a benchmark for the program, work of friction along straight path is calculated and then compared to theoretical prediction. △ Less

Submitted 4 March, 2012; originally announced March 2012.

Comments: 8 pages, 5 figures, submitted to Comm. Cotemp. Phys

Journal ref: Jurnal Pengajaran Fisika Sekolah Menengah 5 (1), 11-15 (2013)

Response of a DC RC circuit in series embedded with a rotating varco

Authors: Sparisoma Viridi, Siti Nurul Khotimah

Abstract: Response in electric potensial $U$ from a DC RC circuit in series has been obtained by varying the capacitance of the capacitor $C$. Variation of the capacitance begins at $t_0 > 0$. Alternating response is observed when the periode of change of capacitance in the same order as $τ= RC$, which is held constant for $t < t_0$ and varied in triangle form for $t > t_0$. Response in electric potensial $U$ from a DC RC circuit in series has been obtained by varying the capacitance of the capacitor $C$. Variation of the capacitance begins at $t_0 > 0$. Alternating response is observed when the periode of change of capacitance in the same order as $τ= RC$, which is held constant for $t < t_0$ and varied in triangle form for $t > t_0$. △ Less

Submitted 30 January, 2012; originally announced January 2012.

Comments: 7 pages, 3 figure, conference paper submitted to APS 2012

Induced Electromotive Force (EMF) Profile in a Circular Loop Passing a Limited Rectangular Area with Perpendicular Uniform Constant Magnetic Field

Authors: Sparisoma Viridi, Siti Nurul Khotimah, Khairurrijal

Abstract: Profile of induced eletromotive force (EMF) for a circular loop (CL) entering and leaving a limited rectangular area which has perpendicular uniform magnetic field is reported in this work. The influence of parameters of the sytem to the induced EMF profile is discussed. Profile of induced eletromotive force (EMF) for a circular loop (CL) entering and leaving a limited rectangular area which has perpendicular uniform magnetic field is reported in this work. The influence of parameters of the sytem to the induced EMF profile is discussed. △ Less

Submitted 17 January, 2012; originally announced January 2012.

Comments: 4 pages, 7 figures, submitted to APS 2011

Procedure to produce discretized path composed by semi-circle and straigth sub-paths

Authors: Sparisoma Viridi

Abstract: Some problems founds in teaching physics related to curved paths that are unfortunately only described as illustration. A simple way to introduce the path is presented, which can help students to test their concept numerically. The procedure is limited into semi-circle and straight sub-paths. Smaller discretizing width $Δs$ gives better form of the produced path. Some problems founds in teaching physics related to curved paths that are unfortunately only described as illustration. A simple way to introduce the path is presented, which can help students to test their concept numerically. The procedure is limited into semi-circle and straight sub-paths. Smaller discretizing width $Δs$ gives better form of the produced path. △ Less

Submitted 31 December, 2011; originally announced January 2012.

Comments: 4 pages, 3 figures

MSC Class: 05C38 ACM Class: I.m

Competition between Thickness and Electrical Conditioning Influence in Enhancing Giant Magnetoresistance Ratio for NiCoFe/Alq3/NiCoFe Spin Valve

Authors: Mitra Djamal, Ramli, Sparisoma Viridi, Khairurrijal

Abstract: Spacer thickness and electrical conditioning have their own influence in enhancing giant magnetoresistance (GMR) ratio. At some condition one factor can override the other as reported by experiment results. An empiric model about competition about these two factors is discussed in this work. Comparison from experiment results to validate the model are also shown and explained. A formulation is pro… ▽ More Spacer thickness and electrical conditioning have their own influence in enhancing giant magnetoresistance (GMR) ratio. At some condition one factor can override the other as reported by experiment results. An empiric model about competition about these two factors is discussed in this work. Comparison from experiment results to validate the model are also shown and explained. A formulation is proposed to extend the existing one that now accommodates both spacer thickness and electrical conditioning in one form. △ Less

Submitted 10 October, 2011; originally announced October 2011.

Comments: 4 pages, 9 figures, submitted to ICPAP 2011

2-D Granular Model of Composite Elasticity using Molecular Dynamics Simulation

Authors: Sparisoma Viridi, Widayani, Siti Nurul Khotimah

Abstract: Composite of two kinds of grains is modeled in two-dimension and the elasticity is calculated using molecular dynamics method implementing Gear predictor-corrector of fifth order. It has been observed that same composite concentration can be represented by several configurations of the two kinds of grains. Simulation results show a peak or maximum value of a parameter proportional to Young's modul… ▽ More Composite of two kinds of grains is modeled in two-dimension and the elasticity is calculated using molecular dynamics method implementing Gear predictor-corrector of fifth order. It has been observed that same composite concentration can be represented by several configurations of the two kinds of grains. Simulation results show a peak or maximum value of a parameter proportional to Young's modulus, which quantitatively agrees with reported experiment results. Ratio of used in simulation has influenced average value of the mentioned parameter monotonically, it is increasing as the ratio increasing. △ Less

Submitted 9 October, 2011; originally announced October 2011.

Comments: 4 pages, 7 figures, submitted to ICPAP 2011

Journal ref: AIP Conference Proceedings 1454, 219-222 (2012)

Giant Magnetoresistance Effect in Organic Material and Its Potential for Magnetic Sensor

Authors: Mitra Djamal, Ramli, Sparisoma Viridi, Khairurrijal

Abstract: Giant magnetoresistance (GMR) material has great potential as next generation magnetic field sensing devices, have magnetic properties and high electrical potential to be developed into various applications such as: magnetic field sensor measurements, current measurements, linear and rotational position sensor, data storage, head recording, and non-volatile magnetic random access memory (MRAM). To… ▽ More Giant magnetoresistance (GMR) material has great potential as next generation magnetic field sensing devices, have magnetic properties and high electrical potential to be developed into various applications such as: magnetic field sensor measurements, current measurements, linear and rotational position sensor, data storage, head recording, and non-volatile magnetic random access memory (MRAM). Today, the new GMR materials based on organic material obtained after allowing for Organic Magnetoresistance (OMAR) was found in OLEDs (organic light-emitting diodes). This organic material is used as a spacer layer in GMR devices with spin-valve structures. Traditionally, metals and semiconductors are used as a spacer layer in spin-valve. However, several factors such as spin scattering caused by large atoms of the spacer material and the interface scattering of ferromagnetic with a spacer, will limit the efficiency of spin-valve. In this paper, we describe a new GMR materials based on organic material that we have developed. △ Less

Submitted 5 October, 2011; originally announced October 2011.

Comments: 3 pages, 6 figures, sumbitted to ICICI-BME 2011 "Science and Technology for Health"

Journal ref: Proceeding of 2nd ICICI-BME, 8-9 Nov. 2011, Bandung, Indonesia, pp. 372 - 375

A Classical Approach in Simple Nuclear Fusion Reaction 1H2 + 1H3 using Two-Dimension Granular Molecular Dynamics Model

Authors: Sparisoma Viridi, Rizal Kurniadi, Abdul Waris, Yudha Satya Perkasa

Abstract: Molecular dynamics in 2-D accompanied by granular model provides an opportunity to investigate binding between nuclei particles and its properties that arises during collision in a fusion reaction. A fully classical approach is used to observe the influence of initial angle of nucleus orientation to the product yielded by the reaction. As an example, a simplest fusion reaction between 1H2 and 1H3… ▽ More Molecular dynamics in 2-D accompanied by granular model provides an opportunity to investigate binding between nuclei particles and its properties that arises during collision in a fusion reaction. A fully classical approach is used to observe the influence of initial angle of nucleus orientation to the product yielded by the reaction. As an example, a simplest fusion reaction between 1H2 and 1H3 is observed. Several products of the fusion reaction have been obtained, even the unreported ones, including temporary 2He4 nucleus. △ Less

Submitted 30 September, 2011; v1 submitted 10 September, 2011; originally announced September 2011.

Comments: 3 pages, 2 figures, submitted to International Conference on Advances in Nuclear Science and Engineering (ICANSE) 2011

Journal ref: AIP Conference Proceedings 1448 (1), 170-176 (2012)

Two dimension porous media reconstruction using granular model under influence of gravity

Authors: Pury Sundari, Umar Fauzi, Zaroh Irayani, Sparisoma Viridi

Abstract: Modeling of pores generation in 2-D with granular grains using molecular dynamics method is reported in this work. Grains with certain diameter distribution are let falling due to gravity. Three configurations (larger diameter on top, smaller diameter on top, and mixed) and two kinds of mixture (same grains density and same grains mass) are used in the simulation. Mixture with heterogen density gi… ▽ More Modeling of pores generation in 2-D with granular grains using molecular dynamics method is reported in this work. Grains with certain diameter distribution are let falling due to gravity. Three configurations (larger diameter on top, smaller diameter on top, and mixed) and two kinds of mixture (same grains density and same grains mass) are used in the simulation. Mixture with heterogen density gives higher porosity than the homogen one for higher initial height, but change into opposite condition for lower initial height. △ Less

Submitted 6 January, 2012; v1 submitted 22 August, 2011; originally announced August 2011.

Comments: 4 pages, 4 figures, Submitted to ICPAP 2011

Journal ref: AIP Conference Proceedings 1454 (1), 121-125 (2012)

Failure of Numerical modeling of 3-D Position Reconstruction from 3-Axial Planar Spiral Coil Sensor Sensitivity due to Existence of Quadratic Terms

Authors: Edi Sanjaya, Mitra Djamal, Sparisoma Viridi

Abstract: A sensitivity profile of a planar spiral coil sensor (PSCS) is proposed and is used to generate the relation of 3-D position of object observed using three PSCSs, one in each x, y, and z axis to the sensors response. A numerical procedure using self consistent field-like method to reconstruct the real position of observed object from sensor sensitivity is presented and the results are discussed. U… ▽ More A sensitivity profile of a planar spiral coil sensor (PSCS) is proposed and is used to generate the relation of 3-D position of object observed using three PSCSs, one in each x, y, and z axis to the sensors response. A numerical procedure using self consistent field-like method to reconstruct the real position of observed object from sensor sensitivity is presented and the results are discussed. Unfortunately, the procedure fails to approach the desired results due to the existence of quadratic terms. △ Less

Submitted 6 October, 2011; v1 submitted 21 August, 2011; originally announced August 2011.

Comments: 4 pages, 3 figures

Journal ref: Jurnal Pengajaran Fisika Sekolah Menengah 3 (1), 9-12 (2011)

A simple pendulum: Obtaining motion of pendulum bob from string tension time series

Authors: Sparisoma Viridi, Siti Nurul Khotimah

Abstract: Time series of string tension of a simple pendulum has not yet been a interesting motion information, even nowadays using a force tension sensor can be measured easily. A numerical procedure is presented how to obtain motion of pendulum bob from the string tension. Unfortunately, proposed procedure does not work. A quadratic term of ωloses the sign of ωthat prevents the procedure to work. Applying… ▽ More Time series of string tension of a simple pendulum has not yet been a interesting motion information, even nowadays using a force tension sensor can be measured easily. A numerical procedure is presented how to obtain motion of pendulum bob from the string tension. Unfortunately, proposed procedure does not work. A quadratic term of ωloses the sign of ωthat prevents the procedure to work. Applying sign of string tension into the procedure can produce the time series but only in positive value. The error for reproduced angular displacement is about 7.6%. △ Less

Submitted 17 August, 2011; originally announced August 2011.

Comments: 10 pages, 7 figures, to be submitted to Jurnal Matematika dan Sains

Journal ref: Jurnal Pengajaran Fisika Sekolah Menengah 3 (1), 15-18 (2011)

Energy of one-dimensional diatomic elastic granular gas: Theory and molecular dynamics Simulation

Authors: Siti Nurul Khotimah, Sparisoma Viridi, Widayani, Abdul Waris

Abstract: One-dimensional ideal diatomic gas is simulated through possible types of motion of a molecule. Energy of each type of its motion is calculated from theory and numerical method. Calculation of kinetic energy of an atom in translational-vibrational motion is not analytically simple, but it can be solved by numerical method of molecular dynamic simulation. This paper justifies that kinetic energy of… ▽ More One-dimensional ideal diatomic gas is simulated through possible types of motion of a molecule. Energy of each type of its motion is calculated from theory and numerical method. Calculation of kinetic energy of an atom in translational-vibrational motion is not analytically simple, but it can be solved by numerical method of molecular dynamic simulation. This paper justifies that kinetic energy of a diatomic molecule can be determined by two different approaches. The first is the sum of kinetic energy of each atom and second is the sum of kinetic energy of translational motion and vibrational motion. △ Less

Submitted 3 August, 2011; originally announced August 2011.

Comments: 6 pages, 3 figures, submitted to Indonesian Journal of Physics

Report number: Hibah Kapasitas FMIPA.PN-6-18-2010

Journal ref: Indonesian Journal of Physics 22 (3), 103-106 (2011)

One dimension spring supported ball on top of a sinusoidal vibrating plate: A forced oscillation simulation using molecular dynamics method

Authors: Sparisoma Viridi, Wahyu Srigutomo, Wahyu Hidayat, Alamta Singarimbun, Sitti Balkis

Abstract: A ball supported by a spring is set on top of a plate which is sinusoidal vibrated. The motion is limited to one dimension motion. It is assumed that the spring is an ideal one with zero mass. The vibrating plate is considered much heavier than the ball, so that the ball motion has no influence on the plate motion. Plate vibration frequency is varied around the frequency of ball-spring system. Res… ▽ More A ball supported by a spring is set on top of a plate which is sinusoidal vibrated. The motion is limited to one dimension motion. It is assumed that the spring is an ideal one with zero mass. The vibrating plate is considered much heavier than the ball, so that the ball motion has no influence on the plate motion. Plate vibration frequency is varied around the frequency of ball-spring system. Resonance phenomenon is reported, which needs a phase match condition to occur. △ Less

Submitted 28 July, 2011; originally announced July 2011.

Comments: 4 pages, 4 figures, submitted to Indonesian Journal of Physics

Journal ref: Indonesian Journal of Physics 22 (2), 53-56 (2011)

How to produce discreet Gaussian sequences: Algorithm and code

Authors: Sparisoma Viridi, Veinardi Suendo

Abstract: Algorithm and code to produce sequences whose members obey Gaussian distribution function is reported. Discreet and limited number of groups are defined in the distribution function, where each group is represented only with one value instead of a range of value. The produced sequences are also checked back whether they still fit the discreet distribution function. Increasing of number of particle… ▽ More Algorithm and code to produce sequences whose members obey Gaussian distribution function is reported. Discreet and limited number of groups are defined in the distribution function, where each group is represented only with one value instead of a range of value. The produced sequences are also checked back whether they still fit the discreet distribution function. Increasing of number of particles N increases the value of correlation coefficient R^2, but increasing number of groups M reduces it. Value R^2 = 1 can be found for N = 1000000 at least with M = 5000$ and for M = 10 at least with N = 1000. △ Less

Submitted 17 July, 2011; originally announced July 2011.

Comments: 18 pages, 5 figures

Journal ref: Jurnal Pengajaran Fisika Sekolah Menengah 2 (2), 19-23 (2010)

Molecular Dynamics Simulation of Smaller Granular Particles Deposition on a Larger One Due to Velocity Sequence Dependent Electrical Charge Distribution

Authors: Euis Sustini, Siti Nurul Khotimah, Ferry Iskandar, Sparisoma Viridi

Abstract: Deposition of smaller granular particles on a larger nucleus particle has been simulated in two-dimension using molecular dynamics method. Variation of sequences of velocity of deposited particles is conducted and reported in this work. The sequences obey a normal distribution function of velocity with the same parameters. It has been observed that for velocity in range of 0 to 0.02 the densest de… ▽ More Deposition of smaller granular particles on a larger nucleus particle has been simulated in two-dimension using molecular dynamics method. Variation of sequences of velocity of deposited particles is conducted and reported in this work. The sequences obey a normal distribution function of velocity with the same parameters. It has been observed that for velocity in range of 0 to 0.02 the densest deposited site (15-17 % number of grains) is located at about angle π/4 where location of injection point is π/4. And the less dense is about π/4 + π/2. Different sequences give similar result. △ Less

Submitted 9 September, 2011; v1 submitted 10 July, 2011; originally announced July 2011.

Comments: 4 pages, 7 figures, conference paper in the 4th Nanoscience and Nanotechnology Symposium (NNS2011)

Journal ref: AIP Conference Proceedings 1415 (1), 209-213 (2011)

Automatic Road Lighting System (ARLS) Model Based on Image Processing of Moving Object

Authors: Suprijadi, Thomas Muliawan, Sparisoma Viridi

Abstract: Using a vehicle toy (in next future called vehicle) as a moving object an automatic road lighting system (ARLS) model is constructed. A digital video camera with 25 fps is used to capture the vehicle motion as it moves in the test segment of the road. Captured images are then processed to calculate vehicle speed. This information of the speed together with position of vehicle is then used to contr… ▽ More Using a vehicle toy (in next future called vehicle) as a moving object an automatic road lighting system (ARLS) model is constructed. A digital video camera with 25 fps is used to capture the vehicle motion as it moves in the test segment of the road. Captured images are then processed to calculate vehicle speed. This information of the speed together with position of vehicle is then used to control the lighting system along the path that passes by the vehicle. Length of the road test segment is 1 m, the video camera is positioned about 1.1 m above the test segment, and the vehicle toy dimension is 13 cm \times 9.3 cm. In this model, the maximum speed that ARLS can handle is about 1.32 m/s, and the highest performance is obtained about 91% at speed 0.93 m/s. △ Less

Submitted 26 November, 2013; v1 submitted 5 July, 2011; originally announced July 2011.

Comments: 5 pages, 8 figures, 1 table, submitted to ARPN Journal of Science and Technology

Journal ref: ARPN Journal of Science and Technology 3 (12), 1105-1109 (2013)

Rise or sink: spherical intruder in density frequency dependence static granular fluid

Authors: Sparisoma Viridi, Seramika Ari Wahjoedi, Suparno Satira, Freddy P. Zen

Abstract: A simple model for intruder in vibrating granular bed is constructed by introducing a term that governs frequency dependent granular bed density. Varying the vibrating frequency will drive the buoyant force acting on the intruder by the granular bed. Swapped regions of rising and sinking intruder compared to other reported result have bee found. A simple model for intruder in vibrating granular bed is constructed by introducing a term that governs frequency dependent granular bed density. Varying the vibrating frequency will drive the buoyant force acting on the intruder by the granular bed. Swapped regions of rising and sinking intruder compared to other reported result have bee found. △ Less

Submitted 5 July, 2011; v1 submitted 26 June, 2011; originally announced June 2011.

Comments: 8 pages, 2 figures

Steady energy transfer dependence granular temperature on single bouncing granular particle

Authors: Suparno Satira, Sparisoma Viridi, Freddy P Zen

Abstract: Simulation of a system consisted of free particle bouncing on a vertically vibrated based is performed. Two different states, which are steady and unsteady energy transfer state are found. The vibrating based is hold at constant vibration frequency $f = 0.1$ as the vibration amplitude $A$ varied. Sinusoidal form is used. Granular temperature $T_g$ as function of based velocity and coefficient of r… ▽ More Simulation of a system consisted of free particle bouncing on a vertically vibrated based is performed. Two different states, which are steady and unsteady energy transfer state are found. The vibrating based is hold at constant vibration frequency $f = 0.1$ as the vibration amplitude $A$ varied. Sinusoidal form is used. Granular temperature $T_g$ as function of based velocity and coefficient of restitution is used but shown no role in determining energy transfer state of the system. Peak of free particle trajectory $x_m$ around value 20 seperate region of the two states. △ Less

Submitted 9 June, 2011; originally announced June 2011.

Comments: 6 pages,3 figures, submitted to Physical Review Letters

Partition function of 1-, 2-, and 3-D monatomic ideal gas: A simple and comprehensive review

Authors: Siti Nurul Khotimah, Sparisoma Viridi

Abstract: This article discusses partition function of monatomic ideal gas which is given in Statistical Physisc at Physics Department, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Indonesia. Students in general are not familiar with partition function. This unfamiliarness was detected at a problem of partition function which was re-given in an examination in other dimensions tha… ▽ More This article discusses partition function of monatomic ideal gas which is given in Statistical Physisc at Physics Department, Faculty of Mathematics and Natural Sciences, Institut Teknologi Bandung, Indonesia. Students in general are not familiar with partition function. This unfamiliarness was detected at a problem of partition function which was re-given in an examination in other dimensions that had been previously given in the lecture. Based on this observation, the need of a simple but comprehensive article about partition function in one-, two-, and three-dimensions is a must. For simplicity, a monatomic ideal gas is chosen. △ Less

Submitted 19 August, 2011; v1 submitted 7 June, 2011; originally announced June 2011.

Comments: 4 pages, 1 figure, 4 tables, being reviewed in Jurnal Pengajaran Fisika Sekolah Menengah

Journal ref: Jurnal Pengajaran Fisika Sekolah Menengah 2 (2), 15-18 (2010)

Ab initio calculation of UV-Vis absorption spectra of a single molecule chlorophyll a: Comparison study between RHF/CIS, TDDFT, and semi-empirical methods

Authors: Veinardi Suendo, Sparisoma Viridi

Abstract: Chlorophyll a is one the most abundant pigment on Earth that responsible for trap** the light energy to perform photosynthesis in green plants. This molecule is a metal-complex that consists of a porphyrin ring with high symmetry that acts as ligands with magnesium as the central ion. Chlorophyll a has been studied for many years from different point of views for both experimental and theoretica… ▽ More Chlorophyll a is one the most abundant pigment on Earth that responsible for trap** the light energy to perform photosynthesis in green plants. This molecule is a metal-complex that consists of a porphyrin ring with high symmetry that acts as ligands with magnesium as the central ion. Chlorophyll a has been studied for many years from different point of views for both experimental and theoretical interests. In this study, the restricted Hartree-Fock configuration interaction single (RHF/CIS), time-dependent density functional theory (TDDFT) and some semi-empirical methods (CNDO/s and ZINDO) calculations were carried out and compared to reconstruct the UV-Vis absorption spectra of chlorophyll a. In some extend, the calculation results based on a single molecule calculation were succeeded to reconstruct the absorption spectra but required to be scaling to match the experimental one. Different computational methods (ab initio and semi-empirical) exhibit the differences in the energy correction factor and the presence of transition states, however, still conserve the main spectral features. In general, the semi-empirical methods provide a better energy scaling factor, which means closer to the experimental one. However, they lack of fine features or vertical transitions with respect to the experimental spectra. The ab initio calculations result more complete features than the semi-empirical methods, especially the TDDFT with high level of basis sets that provides a good accuracy in transition energies. The contribution of ground states and excited states orbitals in the main vertical transitions is discussed based on orbital structure. This might gives a new perspective to explain the energy transfer phenomena in the absorption processes that related to the function of chlorophyll a as a light-harvesting antenna. △ Less

Submitted 13 June, 2011; v1 submitted 18 May, 2011; originally announced May 2011.

Comments: 17 pages, 7 figures, being reviewed at Institut Teknologi Bandung Journal of Science

Journal ref: ITB Journal of Science 44A (2), 79-98 (2012)

Rise time of spherical intruder in granular fluid

Authors: Sparisoma Viridi, Nuning Nuraini, Mohammad Samy, Ayu Fitriyanti, Ika Kusuma Adriani, Nurwenda Amini, Ganjar Santoso

Abstract: A model is developed to explain rise time of a spherical intruder placed in a granular bed, which is considered as fluid. Phenomenon of rising intruder in a granular bed is well known as Brazil nut effect. Radius of the intruder is varied with $R_n = R_0 n, n = 1 .. 10$. An approximation for $t << τ$ is chosen in order to simplify the solution of second order differential equation of intruder vert… ▽ More A model is developed to explain rise time of a spherical intruder placed in a granular bed, which is considered as fluid. Phenomenon of rising intruder in a granular bed is well known as Brazil nut effect. Radius of the intruder is varied with $R_n = R_0 n, n = 1 .. 10$. An approximation for $t << τ$ is chosen in order to simplify the solution of second order differential equation of intruder vertical position to obtain the rise time T. A non-physical parameter $α$ and also transformation from $T$ to $T'$ are needed to be introduced in order to control the results to mimic reported experiment qualitatively. Several forms of rise time $T_n$ and also transformed rise time $T_n'$ against $n$ are presented and discussed. △ Less

Submitted 15 May, 2011; originally announced May 2011.

Comments: 7 pages, 4 figures, conference paper

Self-Siphon Simulation Using Molecular Dynamics Method

Authors: Sparisoma Viridi, Suprijadi, Siti Nurul Khotimah, Novitrian, Fannia Masterika

Abstract: A self activated siphon, which is also known as self-siphon or self-priming siphon, is simulated using molecular dynamics (MD) method in order to study its behavior, especially why it has a critical height that prevents fluid from flowing through it. The trajectory of the fluid interface with air in front of the flow or the head is also fitted the trajectory modeled by parametric equations, which… ▽ More A self activated siphon, which is also known as self-siphon or self-priming siphon, is simulated using molecular dynamics (MD) method in order to study its behavior, especially why it has a critical height that prevents fluid from flowing through it. The trajectory of the fluid interface with air in front of the flow or the head is also fitted the trajectory modeled by parametric equations, which is derived from geometry construction of the self-siphon. Numerical equations solved using MD method is derived from equations of motion of the head which is obtained by introducing all considered forces influencing the movement of it. Time duration needed for fluid to pass the entire tube of the self-siphon, τ, obtained from the simulation is compared quantitatively to the observation data from the previous work and it shows inverse behavior. Length of the three vertical segments are varied independently using a parameter for each segment, which are N_5, N_3, and N_1. Room parameters of N_5, N_3, and N_1 are constructed and the dependency of τ to these parameters are discussed. △ Less

Submitted 6 July, 2011; v1 submitted 11 April, 2011; originally announced April 2011.

Comments: 8 pages, 7 figures, conference paper (ISCS 2011)

Journal ref: Recent Development in Computational Science 2 (1), 9-16 (2011)