Showing 1–28 of 28 results for author: Vinod, A P

Projection-free computation of robust controllable sets with constrained zonotopes

Authors: Abraham P. Vinod, Avishai Weiss, Stefano Di Cairano

Abstract: We study the problem of computing robust controllable sets for discrete-time linear systems with additive uncertainty. We propose a tractable and scalable approach to inner- and outer-approximate robust controllable sets using constrained zonotopes, when the additive uncertainty set is a symmetric, convex, and compact set. Our least-squares-based approach uses novel closed-form approximations of t… ▽ More We study the problem of computing robust controllable sets for discrete-time linear systems with additive uncertainty. We propose a tractable and scalable approach to inner- and outer-approximate robust controllable sets using constrained zonotopes, when the additive uncertainty set is a symmetric, convex, and compact set. Our least-squares-based approach uses novel closed-form approximations of the Pontryagin difference between a constrained zonotopic minuend and a symmetric, convex, and compact subtrahend. Unlike existing approaches, our approach does not rely on convex optimization solvers, and is projection-free for ellipsoidal and zonotopic uncertainty sets. We also propose a least-squares-based approach to compute a convex, polyhedral outer-approximation to constrained zonotopes, and characterize sufficient conditions under which all these approximations are exact. We demonstrate the computational efficiency and scalability of our approach in several case studies, including the design of abort-safe rendezvous trajectories for a spacecraft in near-rectilinear halo orbit under uncertainty. Our approach can inner-approximate a 20-step robust controllable set for a 100-dimensional linear system in under 15 seconds on a standard computer. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Comments: 22 pages, 6 figures

Safe multi-agent motion planning under uncertainty for drones using filtered reinforcement learning

Authors: Sleiman Safaoui, Abraham P. Vinod, Ankush Chakrabarty, Rien Quirynen, Nobuyuki Yoshikawa, Stefano Di Cairano

Abstract: We consider the problem of safe multi-agent motion planning for drones in uncertain, cluttered workspaces. For this problem, we present a tractable motion planner that builds upon the strengths of reinforcement learning and constrained-control-based trajectory planning. First, we use single-agent reinforcement learning to learn motion plans from data that reach the target but may not be collision-… ▽ More We consider the problem of safe multi-agent motion planning for drones in uncertain, cluttered workspaces. For this problem, we present a tractable motion planner that builds upon the strengths of reinforcement learning and constrained-control-based trajectory planning. First, we use single-agent reinforcement learning to learn motion plans from data that reach the target but may not be collision-free. Next, we use a convex optimization, chance constraints, and set-based methods for constrained control to ensure safety, despite the uncertainty in the workspace, agent motion, and sensing. The proposed approach can handle state and control constraints on the agents, and enforce collision avoidance among themselves and with static obstacles in the workspace with high probability. The proposed approach yields a safe, real-time implementable, multi-agent motion planner that is simpler to train than methods based solely on learning. Numerical simulations and experiments show the efficacy of the approach. △ Less

Submitted 31 October, 2023; originally announced November 2023.

On-the-fly control of unknown nonlinear systems with sublinear regret

Authors: Abraham P. Vinod, Arie Israel, Ufuk Topcu

Abstract: We study the problem of data-driven, constrained control of unknown nonlinear dynamics from a single ongoing and finite-horizon trajectory. We consider a one-step optimal control problem with a smooth, black-box objective, typically a composition of a known cost function and the unknown dynamics. We investigate an on-the-fly control paradigm, i.e., at each time step, the evolution of the dynamics… ▽ More We study the problem of data-driven, constrained control of unknown nonlinear dynamics from a single ongoing and finite-horizon trajectory. We consider a one-step optimal control problem with a smooth, black-box objective, typically a composition of a known cost function and the unknown dynamics. We investigate an on-the-fly control paradigm, i.e., at each time step, the evolution of the dynamics and the first-order information of the cost are provided only for the executed control action. We propose an optimization-based control algorithm that iteratively minimizes a data-driven surrogate function for the unknown objective. We prove that the proposed approach incurs sublinear cumulative regret (step-wise suboptimality with respect to an optimal one-step controller) and is worst-case optimal among a broad class of data-driven control algorithms. We also present tractable reformulations of the approach that can leverage off-the-shelf solvers for efficient implementations. △ Less

Submitted 22 June, 2022; originally announced June 2022.

Comments: 13 pages, 19 figures

Safely: Safe Stochastic Motion Planning Under Constrained Sensing via Duality

Authors: Michael Hibbard, Abraham P. Vinod, Jesse Quattrociocchi, Ufuk Topcu

Abstract: Consider a robot operating in an uncertain environment with stochastic, dynamic obstacles. Despite the clear benefits for trajectory optimization, it is often hard to keep track of each obstacle at every time step due to sensing and hardware limitations. We introduce the Safely motion planner, a receding-horizon control framework, that simultaneously synthesizes both a trajectory for the robot to… ▽ More Consider a robot operating in an uncertain environment with stochastic, dynamic obstacles. Despite the clear benefits for trajectory optimization, it is often hard to keep track of each obstacle at every time step due to sensing and hardware limitations. We introduce the Safely motion planner, a receding-horizon control framework, that simultaneously synthesizes both a trajectory for the robot to follow as well as a sensor selection strategy that prescribes trajectory-relevant obstacles to measure at each time step while respecting the sensing constraints of the robot. We perform the motion planning using sequential quadratic programming, and prescribe obstacles to sense based on the duality information associated with the convex subproblems. We guarantee safety by ensuring that the probability of the robot colliding with any of the obstacles is below a prescribed threshold at every time step of the planned robot trajectory. We demonstrate the efficacy of the Safely motion planner through software and hardware experiments. △ Less

Submitted 5 March, 2022; originally announced March 2022.

Comments: 11 pages, submitted to Transactions on Robotics (T-RO)

An Approach Towards Physics Informed Lung Ultrasound Image Scoring Neural Network for Diagnostic Assistance in COVID-19

Authors: Mahesh Raveendranatha Panicker, Yale Tung Chen, Gayathri M, Madhavanunni A N, Kiran Vishnu Narayan, C Kesavadas, A P Vinod

Abstract: Ultrasound is fast becoming an inevitable diagnostic tool for regular and continuous monitoring of the lung with the recent outbreak of COVID-19. In this work, a novel approach is presented to extract acoustic propagation-based features to automatically highlight the region below pleura, which is an important landmark in lung ultrasound (LUS). Subsequently, a multichannel input formed by using the… ▽ More Ultrasound is fast becoming an inevitable diagnostic tool for regular and continuous monitoring of the lung with the recent outbreak of COVID-19. In this work, a novel approach is presented to extract acoustic propagation-based features to automatically highlight the region below pleura, which is an important landmark in lung ultrasound (LUS). Subsequently, a multichannel input formed by using the acoustic physics-based feature maps is fused to train a neural network, referred to as LUSNet, to classify the LUS images into five classes of varying severity of lung infection to track the progression of COVID-19. In order to ensure that the proposed approach is agnostic to the type of acquisition, the LUSNet, which consists of a U-net architecture is trained in an unsupervised manner with the acoustic feature maps to ensure that the encoder-decoder architecture is learning features in the pleural region of interest. A novel combination of the U-net output and the U-net encoder output is employed for the classification of severity of infection in the lung. A detailed analysis of the proposed approach on LUS images over the infection to full recovery period of ten confirmed COVID-19 subjects shows an average five-fold cross-validation accuracy, sensitivity, and specificity of 97%, 93%, and 98% respectively over 5000 frames of COVID-19 videos. The analysis also shows that, when the input dataset is limited and diverse as in the case of COVID-19 pandemic, an aided effort of combining acoustic propagation-based features along with the gray scale images, as proposed in this work, improves the performance of the neural network significantly and also aids the labelling and triaging process. △ Less

Submitted 13 June, 2021; originally announced June 2021.

Comments: 8 pages, 8 figures, 3 tables, submitted to Springer SIVP Special Issue for COVID19

FBCNet: A Multi-view Convolutional Neural Network for Brain-Computer Interface

Authors: Ravikiran Mane, Effie Chew, Karen Chua, Kai Keng Ang, Neethu Robinson, A. P. Vinod, Seong-Whan Lee, Cuntai Guan

Abstract: Lack of adequate training samples and noisy high-dimensional features are key challenges faced by Motor Imagery (MI) decoding algorithms for electroencephalogram (EEG) based Brain-Computer Interface (BCI). To address these challenges, inspired from neuro-physiological signatures of MI, this paper proposes a novel Filter-Bank Convolutional Network (FBCNet) for MI classification. FBCNet employs a mu… ▽ More Lack of adequate training samples and noisy high-dimensional features are key challenges faced by Motor Imagery (MI) decoding algorithms for electroencephalogram (EEG) based Brain-Computer Interface (BCI). To address these challenges, inspired from neuro-physiological signatures of MI, this paper proposes a novel Filter-Bank Convolutional Network (FBCNet) for MI classification. FBCNet employs a multi-view data representation followed by spatial filtering to extract spectro-spatially discriminative features. This multistage approach enables efficient training of the network even when limited training data is available. More significantly, in FBCNet, we propose a novel Variance layer that effectively aggregates the EEG time-domain information. With this design, we compare FBCNet with state-of-the-art (SOTA) BCI algorithm on four MI datasets: The BCI competition IV dataset 2a (BCIC-IV-2a), the OpenBMI dataset, and two large datasets from chronic stroke patients. The results show that, by achieving 76.20% 4-class classification accuracy, FBCNet sets a new SOTA for BCIC-IV-2a dataset. On the other three datasets, FBCNet yields up to 8% higher binary classification accuracies. Additionally, using explainable AI techniques we present one of the first reports about the differences in discriminative EEG features between healthy subjects and stroke patients. Also, the FBCNet source code is available at https://github.com/ravikiran-mane/FBCNet. △ Less

Submitted 17 March, 2021; originally announced April 2021.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Physical-Layer Security via Distributed Beamforming in the Presence of Adversaries with Unknown Locations

Authors: Yagiz Savas, Abolfazl Hashemi, Abraham P. Vinod, Brian M. Sadler, Ufuk Topcu

Abstract: We study the problem of securely communicating a sequence of information bits with a client in the presence of multiple adversaries at unknown locations in the environment. We assume that the client and the adversaries are located in the far-field region, and all possible directions for each adversary can be expressed as a continuous interval of directions. In such a setting, we develop a periodic… ▽ More We study the problem of securely communicating a sequence of information bits with a client in the presence of multiple adversaries at unknown locations in the environment. We assume that the client and the adversaries are located in the far-field region, and all possible directions for each adversary can be expressed as a continuous interval of directions. In such a setting, we develop a periodic transmission strategy, i.e., a sequence of joint beamforming gain and artificial noise pairs, that prevents the adversaries from decreasing their uncertainty on the information sequence by eavesdrop** on the transmission. We formulate a series of nonconvex semi-infinite optimization problems to synthesize the transmission strategy. We show that the semi-definite program (SDP) relaxations of these nonconvex problems are exact under an efficiently verifiable sufficient condition. We approximate the SDP relaxations, which are subject to infinitely many constraints, by randomly sampling a finite subset of the constraints and establish the probability with which optimal solutions to the obtained finite SDPs and the semi-infinite SDPs coincide. We demonstrate with numerical simulations that the proposed periodic strategy can ensure the security of communication in scenarios in which all stationary strategies fail to guarantee security. △ Less

Submitted 28 February, 2021; originally announced March 2021.

Comments: 5 pages, 3 figures

Constrained, Global Optimization of Functions with Lipschitz Continuous Gradients

Authors: Abraham P. Vinod, Arie Israel, Ufuk Topcu

Abstract: We present two first-order, sequential optimization algorithms to solve constrained optimization problems. We consider a black-box setting with a priori unknown, non-convex objective and constraint functions that have Lipschitz continuous gradients. The proposed algorithms balance the exploration of the a priori unknown feasible space with the pursuit of global optimality within in a pre-specified… ▽ More We present two first-order, sequential optimization algorithms to solve constrained optimization problems. We consider a black-box setting with a priori unknown, non-convex objective and constraint functions that have Lipschitz continuous gradients. The proposed algorithms balance the exploration of the a priori unknown feasible space with the pursuit of global optimality within in a pre-specified finite number of first-order oracle calls. The first algorithm accommodates an infeasible start, and provides either a near-optimal global solution or establishes infeasibility. However, the algorithm may produce infeasible iterates during the search. For a strongly-convex constraint function and a feasible initial solution guess, the second algorithm returns a near-optimal global solution without any constraint violation. In contrast to existing methods, both of the algorithms also compute global suboptimality bounds at every iteration. We also show that the algorithms can satisfy user-specified tolerances in the computed solution with near-optimal complexity in oracle calls for a large class of optimization problems. We propose tractable implementations of the algorithms by exploiting the structure afforded by the Lipschitz continuous gradient property. △ Less

Submitted 17 November, 2020; originally announced November 2020.

On-The-Fly Control of Unknown Systems: From Side Information to Performance Guarantees through Reachability

Authors: Franck Djeumou, Abraham P. Vinod, Eric Goubault, Sylvie Putot, Ufuk Topcu

Abstract: We develop data-driven algorithms for reachability analysis and control of systems with a priori unknown nonlinear dynamics. The resulting algorithms not only are suitable for settings with real-time requirements but also provide provable performance guarantees. To this end, they merge noisy data from only a single finite-horizon trajectory and, if available, various forms of side information. Suc… ▽ More We develop data-driven algorithms for reachability analysis and control of systems with a priori unknown nonlinear dynamics. The resulting algorithms not only are suitable for settings with real-time requirements but also provide provable performance guarantees. To this end, they merge noisy data from only a single finite-horizon trajectory and, if available, various forms of side information. Such side information may include knowledge of the regularity of the dynamics, algebraic constraints on the states, monotonicity, or decoupling in the dynamics between the states. Specifically, we develop two algorithms, $\texttt{DaTaReach}$ and $\texttt{DaTaControl}$, to over-approximate the reachable set and design control signals for the system on the fly. $\texttt{DaTaReach}$ constructs a differential inclusion that contains the unknown dynamics. Then, in a discrete-time setting, it over-approximates the reachable set through interval Taylor-based methods applied to systems with dynamics described as differential inclusions. We provide a bound on the time step size that ensures the correctness and termination of $\texttt{DaTaReach}$. $\texttt{DaTaControl}$ enables convex-optimization-based control using the computed over-approximation and the receding-horizon control framework. Besides, $\texttt{DaTaControl}$ achieves near-optimal control and is suitable for real-time control of such systems. We establish a bound on its suboptimality and the number of primitive operations it requires to compute control values. Then, we theoretically show that $\texttt{DaTaControl}$ achieves tighter suboptimality bounds with an increasing amount of data and richer side information. Finally, experiments on a unicycle, quadrotor, and aircraft systems demonstrate the efficacy of both algorithms over existing approaches. △ Less

Submitted 16 December, 2021; v1 submitted 10 November, 2020; originally announced November 2020.

Comments: Extended version of the initial submission to IEEE TAC. arXiv admin note: substantial text overlap with arXiv:2009.12733

Convexified Open-Loop Stochastic Optimal Control for Linear Non-Gaussian Systems

Authors: Vignesh Sivaramakrishnan, Abraham P. Vinod, Meeko M. K. Oishi

Abstract: We consider stochastic optimal control of linear dynamical systems with additive non-Gaussian disturbance. We propose a novel, sampling-free approach, based on Fourier transformations and convex optimization, to cast the stochastic optimal control problem as a difference-of-convex program. In contrast to existing moment based approaches, our approach invokes higher moments, resulting in less conse… ▽ More We consider stochastic optimal control of linear dynamical systems with additive non-Gaussian disturbance. We propose a novel, sampling-free approach, based on Fourier transformations and convex optimization, to cast the stochastic optimal control problem as a difference-of-convex program. In contrast to existing moment based approaches, our approach invokes higher moments, resulting in less conservatism. We employ piecewise affine approximations and the well-known convex-concave procedure, to efficiently solve the resulting optimization problem via standard conic solvers. We demonstrate that the proposed approach is computationally faster than existing particle based and moment based approaches, without compromising probabilistic safety constraints. △ Less

Submitted 5 October, 2020; originally announced October 2020.

Comments: Initial submission to IEEE Transactions on Automatic Control

On-The-Fly Control of Unknown Smooth Systems from Limited Data

Authors: Franck Djeumou, Abraham P. Vinod, Eric Goubault, Sylvie Putot, Ufuk Topcu

Abstract: We investigate the problem of data-driven, on-the-fly control of systems with unknown nonlinear dynamics where data from only a single finite-horizon trajectory and possibly side information on the dynamics are available. Such side information may include knowledge of the regularity of the dynamics, monotonicity of the states, or decoupling in the dynamics between the states. Specifically, we deve… ▽ More We investigate the problem of data-driven, on-the-fly control of systems with unknown nonlinear dynamics where data from only a single finite-horizon trajectory and possibly side information on the dynamics are available. Such side information may include knowledge of the regularity of the dynamics, monotonicity of the states, or decoupling in the dynamics between the states. Specifically, we develop two algorithms, $\texttt{DaTaReach}$ and $\texttt{DaTaControl}$, to over-approximate the reachable set and design control signals for the system on the fly. $\texttt{DaTaReach}$ constructs a differential inclusion that contains the unknown vector field. Then, it computes an over-approximation of the reachable set based on interval Taylor-based methods applied to systems with dynamics described as differential inclusions. $\texttt{DaTaControl}$ enables convex-optimization-based, near-optimal control using the computed over-approximation and the receding-horizon control framework. We provide a bound on its suboptimality and show that more data and side information enable $\texttt{DaTaControl}$ to achieve tighter suboptimality bounds. Finally, we demonstrate the efficacy of $\texttt{DaTaControl}$ over existing approaches on the problems of controlling a unicycle and quadrotor systems. △ Less

Submitted 22 March, 2021; v1 submitted 26 September, 2020; originally announced September 2020.

Comments: Extended version of the final submission to the American Control Conference (ACC) 2021

Design and Implementation of Low Complexity Reconfigurable Filtered-OFDM based LDACS

Authors: N. Agrawal, A. Ambede, S. J. Darak, A. P. Vinod, A. S. Madhukumar

Abstract: L-band Digital Aeronautical Communication System (LDACS) aims to exploit vacant spectrum in L-band via spectrum sharing, and orthogonal frequency division multiplexing (OFDM) is the currently accepted LDACS waveform. Recently, various works dealing with improving the spectrum utilization of LDACS via filtering/windowing are being explored. In this direction, we propose an improved and low complexi… ▽ More L-band Digital Aeronautical Communication System (LDACS) aims to exploit vacant spectrum in L-band via spectrum sharing, and orthogonal frequency division multiplexing (OFDM) is the currently accepted LDACS waveform. Recently, various works dealing with improving the spectrum utilization of LDACS via filtering/windowing are being explored. In this direction, we propose an improved and low complexity reconfigurable filtered OFDM (LRef-OFDM) based LDACS using novel interpolation and masking based multi-stage digital filter. The proposed filter is designed to meet the stringent non-uniform spectral attenuation requirements of LDACS standard. It offers significantly lower complexity as well as higher transmission bandwidth than state-of-the-art approaches. We also integrate the proposed filter in our end-to-end LDACS testbed realized using Zynq System on Chip and analyze the performance in the presence of $L$-band legacy user interference as well as LDACS specific wireless channels. Via extensive experimental results, we demonstrate the superiority of the proposed LRef-OFDM over OFDM and Filtered-OFDM based LDACS in terms of power spectral density, bit error rate, implementation complexity, and group delay parameters. △ Less

Submitted 17 January, 2021; v1 submitted 21 September, 2020; originally announced September 2020.

Comments: Paper with Appendix

Near-Optimal Reactive Synthesis Incorporating Runtime Information

Authors: Suda Bharadwaj, Abraham P. Vinod, Rayna Dimitrova, Ufuk Topcu

Abstract: We consider the problem of optimal reactive synthesis - compute a strategy that satisfies a mission specification in a dynamic environment, and optimizes a performance metric. We incorporate task-critical information, that is only available at runtime, into the strategy synthesis in order to improve performance. Existing approaches to utilising such time-varying information require online re-synth… ▽ More We consider the problem of optimal reactive synthesis - compute a strategy that satisfies a mission specification in a dynamic environment, and optimizes a performance metric. We incorporate task-critical information, that is only available at runtime, into the strategy synthesis in order to improve performance. Existing approaches to utilising such time-varying information require online re-synthesis, which is not computationally feasible in real-time applications. In this paper, we pre-synthesize a set of strategies corresponding to candidate instantiations (pre-specified representative information scenarios). We then propose a novel switching mechanism to dynamically switch between the strategies at runtime while guaranteeing all safety and liveness goals are met. We also characterize bounds on the performance suboptimality. We demonstrate our approach on two examples - robotic motion planning where the likelihood of the position of the robot's goal is updated in real-time, and an air traffic management problem for urban air mobility. △ Less

Submitted 31 July, 2020; originally announced July 2020.

Comments: Presented at ICRA2020

Blending Controllers via Multi-Objective Bandits

Authors: Parham Gohari, Franck Djeumou, Abraham P. Vinod, Ufuk Topcu

Abstract: Safety and performance are often two competing objectives in sequential decision-making problems. Existing performant controllers, such as controllers derived from reinforcement learning algorithms, often fall short of safety guarantees. On the contrary, controllers that guarantee safety, such as those derived from classical control theory, require restrictive assumptions and are often conservativ… ▽ More Safety and performance are often two competing objectives in sequential decision-making problems. Existing performant controllers, such as controllers derived from reinforcement learning algorithms, often fall short of safety guarantees. On the contrary, controllers that guarantee safety, such as those derived from classical control theory, require restrictive assumptions and are often conservative in performance. Our goal is to blend a performant and a safe controller to generate a single controller that is safer than the performant and accumulates higher rewards than the safe controller. To this end, we propose a blending algorithm using the framework of contextual multi-armed multi-objective bandits. At each stage, the algorithm observes the environment's current context alongside an immediate reward and cost, which is the underlying safety measure. The algorithm then decides which controller to employ based on its observations. We demonstrate that the algorithm achieves sublinear Pareto regret, a performance measure that models coherence with an expert that always avoids picking the controller with both inferior safety and performance. We derive an upper bound on the loss in individual objectives, which imposes no additional computational complexity. We empirically demonstrate the algorithm's success in blending a safe and a performant controller in a safety-focused testbed, the Safety Gym environment. A statistical analysis of the blended controller's total reward and cost reflects two key takeaways: The blended controller shows a strict improvement in performance compared to the safe controller, and it is safer than the performant controller. △ Less

Submitted 30 July, 2020; originally announced July 2020.

Comments: Under review at NeurIPS 2020

Trust-based user-interface design for human-automation systems

Authors: Abraham P. Vinod, Adam J. Thorpe, Philip A. Olaniyi, Tyler H. Summers, Meeko M. K. Oishi

Abstract: We present a method for dynamics-driven, user-interface design for a human-automation system via sensor selection. We define the user-interface to be the output of a MIMO LTI system, and formulate the design problem as one of selecting an output matrix from a given set of candidate output matrices. Sufficient conditions for situation awareness are captured as additional constraints on the selectio… ▽ More We present a method for dynamics-driven, user-interface design for a human-automation system via sensor selection. We define the user-interface to be the output of a MIMO LTI system, and formulate the design problem as one of selecting an output matrix from a given set of candidate output matrices. Sufficient conditions for situation awareness are captured as additional constraints on the selection of the output matrix. These constraints depend upon the level of trust the human has in the automation. We show that the resulting user-interface design problem is a combinatorial, set-cardinality minimization problem with set function constraints. We propose tractable algorithms to compute optimal or sub-optimal solutions with suboptimality bounds. Our approaches exploit monotonicity and submodularity present in the design problem, and rely on constraint programming and submodular maximization. We apply this method to the IEEE 118-bus, to construct correct-by-design interfaces under various operating scenarios. △ Less

Submitted 15 April, 2020; originally announced April 2020.

Comments: 20 pages, 8 figures, 4 tables

Voronoi Partition-based Scenario Reduction for Fast Sampling-based Stochastic Reachability Computation of LTI Systems

Authors: Hossein Sartipizadeh, Abraham P. Vinod, Behcet Acikmese, Meeko Oishi

Abstract: In this paper, we address the stochastic reach-avoid problem for linear systems with additive stochastic uncertainty. We seek to compute the maximum probability that the states remain in a safe set over a finite time horizon and reach a target set at the final time. We employ sampling-based methods and provide a lower bound on the number of scenarios required to guarantee that our estimate provide… ▽ More In this paper, we address the stochastic reach-avoid problem for linear systems with additive stochastic uncertainty. We seek to compute the maximum probability that the states remain in a safe set over a finite time horizon and reach a target set at the final time. We employ sampling-based methods and provide a lower bound on the number of scenarios required to guarantee that our estimate provides an underapproximation. Due to the probabilistic nature of the sampling-based methods, our underapproximation guarantee is probabilistic, and the proposed lower bound can be used to satisfy a prescribed probabilistic confidence level. To decrease the computational complexity, we propose a Voronoi partition-based to check the reach-avoid constraints at representative partitions (cells), instead of the original scenarios. The state constraints arising from the safe and target sets are tightened appropriately so that the solution provides an underapproximation for the original sampling-based method. We propose a systematic approach for selecting these representative cells and provide the flexibility to trade-off the number of cells needed for accuracy with the computational cost. △ Less

Submitted 8 November, 2018; originally announced November 2018.

Comments: Under review at American Control Conference, 2019

Lagrangian Approximations for Stochastic Reachability of a Target Tube

Authors: Joseph D. Gleason, Abraham P. Vinod, Meeko M. K. Oishi

Abstract: In this paper we examine how Lagrangian techniques can be used to compute underapproximations and overapproximation of the finite-time horizon, stochastic reach-avoid level sets for discrete-time, nonlinear systems. This approach is applicable for a generic nonlinear system without any convexity assumptions on the safe and target sets. We examine and apply our methods on the reachability of a targ… ▽ More In this paper we examine how Lagrangian techniques can be used to compute underapproximations and overapproximation of the finite-time horizon, stochastic reach-avoid level sets for discrete-time, nonlinear systems. This approach is applicable for a generic nonlinear system without any convexity assumptions on the safe and target sets. We examine and apply our methods on the reachability of a target tube problem, a more generalized version of the finite-time horizon reach-avoid problem. Because these methods utilize a Lagrangian (set theoretic) approach, we eliminate the necessity to grid the state, input, and disturbance spaces allowing for increased scalability and faster computation. The methods scalability are currently limited by the computational requirements for performing the necessary set operations by current computational geometry tools. The primary trade-off for this improved extensibility is conservative approximations of actual stochastic reach set. We demonstrate these methods on several examples including the standard double-integrator, a chain of integrators, and a 4-dimensional space vehicle rendezvous docking problem. △ Less

Submitted 16 October, 2018; originally announced October 2018.

Stochastic reachability of a target tube: Theory and computation

Authors: Abraham P. Vinod, Meeko M. K. Oishi

Abstract: Probabilistic guarantees of safety and performance are important in constrained dynamical systems with stochastic uncertainty. We consider the stochastic reachability problem, which maximizes the probability that the state remains within time-varying state constraints (i.e., a ``target tube''), despite bounded control authority. This problem subsumes the stochastic viability and terminal hitting-t… ▽ More Probabilistic guarantees of safety and performance are important in constrained dynamical systems with stochastic uncertainty. We consider the stochastic reachability problem, which maximizes the probability that the state remains within time-varying state constraints (i.e., a ``target tube''), despite bounded control authority. This problem subsumes the stochastic viability and terminal hitting-time stochastic reach-avoid problems. Of special interest is the stochastic reach set, the set of all initial states from which it is possible to stay in the target tube with a probability above a desired threshold. We provide sufficient conditions under which the stochastic reach set is closed, compact, and convex, and provide an underapproximative interpolation technique for stochastic reach sets. Utilizing convex optimization, we propose a scalable and grid-free algorithm that computes a polytopic underapproximation of the stochastic reach set and synthesizes an open-loop controller. This algorithm is anytime, i.e., it produces a valid output even on early termination. We demonstrate the efficacy and scalability of our approach on several numerical examples, and show that our algorithm outperforms existing software tools for verification of linear systems. △ Less

Submitted 30 November, 2020; v1 submitted 11 October, 2018; originally announced October 2018.

Comments: Accepted for publication in Automatica

Variable Cutoff Frequency FIR Filters: A Survey

Authors: Sumedh Dhabu, Abhishek Ambede, Smitha K. G., Sumit Darak and, A. P. Vinod

Abstract: Many signal processing applications require digital filters with variable frequency characteristics, especially the filters with variable bandwidth. Due to their linear phase and inherent stability, variable bandwidth finite impulse response (FIR) filters are the popular choice in majority of the applications. Once a variable cutoff frequency (VCF) FIR lowpass filter is designed, variable bandwidt… ▽ More Many signal processing applications require digital filters with variable frequency characteristics, especially the filters with variable bandwidth. Due to their linear phase and inherent stability, variable bandwidth finite impulse response (FIR) filters are the popular choice in majority of the applications. Once a variable cutoff frequency (VCF) FIR lowpass filter is designed, variable bandwidth bandpass / highpass / bandstop filters and reconfigurable filter banks can be realized from the same. In this paper, we present a comprehensive review of the existing variable cutoff frequency FIR filter design techniques, including the developments in the recent two decades. We provide the basic concepts, design and architectural details for each of these techniques and the major developments / incremental works thereof. Qualitative as well as quantitative comparisons are provided to assist the reader in choosing the most suitable VCF filter design technique for a particular application. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Probabilistic Occupancy Function and Sets Using Forward Stochastic Reachability for Rigid-Body Dynamic Obstacles

Authors: Abraham P. Vinod, Meeko M. K. Oishi

Abstract: We present theory and algorithms for the computation of probability-weighted "keep-out" sets to assure probabilistically safe navigation in the presence of multiple rigid body obstacles with stochastic dynamics. Our forward stochastic reachability-based approach characterizes the stochasticity of the future obstacle states in a grid-free and recursion-free manner, using Fourier transforms and comp… ▽ More We present theory and algorithms for the computation of probability-weighted "keep-out" sets to assure probabilistically safe navigation in the presence of multiple rigid body obstacles with stochastic dynamics. Our forward stochastic reachability-based approach characterizes the stochasticity of the future obstacle states in a grid-free and recursion-free manner, using Fourier transforms and computational geometry. We consider discrete-time Markovian switched systems with affine parameter-varying stochastic subsystems (DMSP) as the obstacle dynamics, which includes Markov jump affine systems and discrete-time affine parameter-varying stochastic systems (DPV). We define a probabilistic occupancy function, to describe the probability that a given state is occupied by a rigid body obstacle with stochastic dynamics at a given time; keep-out sets are the super-level sets of this occupancy function. We provide sufficient conditions that ensure convexity and compactness of these keep-out sets for DPV obstacle dynamics. We also propose two computationally efficient algorithms to overapproximate the keep-out sets --- a tight polytopic approximation using projections, and an overapproximation using Minkowski sum. For DMSP obstacle dynamics, we compute a union of convex and compact sets that covers the potentially non-convex keep-out set. Numerical simulations show the efficacy of the proposed algorithms for a modified version of the classical unicycle dynamics, modeled as a DMSP. △ Less

Submitted 19 September, 2018; v1 submitted 19 March, 2018; originally announced March 2018.

Comments: Updated text for submission to IEEE Transactions on Automatic Control

An Efficient Data-aided Synchronization in L-DACS1 for Aeronautical Communications

Authors: Thinh H. Pham, A. P. Vinod, A. S. Madhukumar

Abstract: L-band Digital Aeronautical Communication System type-1 (L-DACS1) is an emerging standard that aims at enhancing air traffic management (ATM) by transitioning the traditional analog aeronautical communication systems to the superior and highly efficient digital domain. L-DACS1 employs modern and efficient orthogonal frequency division multiplexing (OFDM) modulation technique to achieve more effici… ▽ More L-band Digital Aeronautical Communication System type-1 (L-DACS1) is an emerging standard that aims at enhancing air traffic management (ATM) by transitioning the traditional analog aeronautical communication systems to the superior and highly efficient digital domain. L-DACS1 employs modern and efficient orthogonal frequency division multiplexing (OFDM) modulation technique to achieve more efficient and higher data rate in comparison to the existing aeronautical communication systems. However, the performance of OFDM systems is very sensitive to synchronization errors. L-DACS1 transmission is in the L-band aeronautical channels that suffer from large interference and large Doppler shifts, which makes the synchronization for L-DACS more challenging. This paper proposes a novel computationally efficient synchronization method for L-DACS1 systems that offers robust performance. Through simulation, the proposed method is shown to provide accurate symbol timing offset (STO) estimation as well as fractional carrier frequency offset (CFO) estimation in a range of aeronautical channels. In particular, it can yield excellent synchronization performance in the face of a large carrier frequency offset. △ Less

Submitted 17 January, 2018; originally announced January 2018.

Comments: In the proceeding of International Conference on Data Mining, Communications and Information Technology (DMCIT)

Underapproximation of Reach-Avoid Sets for Discrete-Time Stochastic Systems via Lagrangian Methods

Authors: Joseph D. Gleason, Abraham P. Vinod, Meeko. M. K. Oishi

Abstract: We examine Lagrangian techniques for computing underapproximations of finite-time horizon, stochastic reach-avoid level-sets for discrete-time, nonlinear systems. We use the concept of reachability of a target tube in the control literature to define robust reach-avoid sets which are parameterized by the target set, safe set, and the set in which the disturbance is drawn from. We unify two existin… ▽ More We examine Lagrangian techniques for computing underapproximations of finite-time horizon, stochastic reach-avoid level-sets for discrete-time, nonlinear systems. We use the concept of reachability of a target tube in the control literature to define robust reach-avoid sets which are parameterized by the target set, safe set, and the set in which the disturbance is drawn from. We unify two existing Lagrangian approaches to compute these sets and establish that there exists an optimal control policy of the robust reach-avoid sets which is a Markov policy. Based on these results, we characterize the subset of the disturbance space whose corresponding robust reach-avoid set for the given target and safe set is a guaranteed underapproximation of the stochastic reach-avoid level-set of interest. The proposed approach dramatically improves the computational efficiency for obtaining an underapproximation of stochastic reach-avoid level-sets when compared to the traditional approaches based on gridding. Our method, while conservative, does not rely on a grid, implying scalability as permitted by the known computational geometry constraints. We demonstrate the method on two examples: a simple two-dimensional integrator, and a space vehicle rendezvous-docking problem. △ Less

Submitted 11 April, 2017; originally announced April 2017.

Comments: Submitted to CDC 2017

Scalable Underapproximation for the Stochastic Reach-Avoid Problem for High-Dimensional LTI Systems using Fourier Transforms

Authors: Abraham P. Vinod, Meeko M. K. Oishi

Abstract: We present a scalable underapproximation of the terminal hitting time stochastic reach-avoid probability at a given initial condition, for verification of high-dimensional stochastic LTI systems. While several approximation techniques have been proposed to alleviate the curse of dimensionality associated with dynamic programming, these techniques are limited and cannot handle larger, more realisti… ▽ More We present a scalable underapproximation of the terminal hitting time stochastic reach-avoid probability at a given initial condition, for verification of high-dimensional stochastic LTI systems. While several approximation techniques have been proposed to alleviate the curse of dimensionality associated with dynamic programming, these techniques are limited and cannot handle larger, more realistic systems. We present a scalable method that uses Fourier transforms to compute an underapproximation of the reach-avoid probability for systems with disturbances with arbitrary probability densities. We characterize sufficient conditions for Borel-measurability of the value functions. We exploit fixed control sequences parameterized by the initial condition (an open-loop control policy) to generate the underapproximation. For Gaussian disturbances, the underapproximation can be obtained using existing efficient algorithms by solving a convex optimization problem. Our approach produces non-trivial lower bounds and is demonstrated on a chain of integrators with 40 states. △ Less

Submitted 16 May, 2017; v1 submitted 6 March, 2017; originally announced March 2017.

Comments: Extended version (addresses reviewer comments) | Submitted to L-CSS

MSC Class: 93E20 (Primary) 60J05 (Secondary) ACM Class: I.2.8; I.2.9; G.1.6

Forward Stochastic Reachability Analysis for Uncontrolled Linear Systems using Fourier Transforms

Authors: Abraham P. Vinod, Baisravan Homchaudhuri, Meeko M. K. Oishi

Abstract: We propose a scalable method for forward stochastic reachability analysis for uncontrolled linear systems with affine disturbance. Our method uses Fourier transforms to efficiently compute the forward stochastic reach probability measure (density) and the forward stochastic reach set. This method is applicable to systems with bounded or unbounded disturbance sets. We also examine the convexity pro… ▽ More We propose a scalable method for forward stochastic reachability analysis for uncontrolled linear systems with affine disturbance. Our method uses Fourier transforms to efficiently compute the forward stochastic reach probability measure (density) and the forward stochastic reach set. This method is applicable to systems with bounded or unbounded disturbance sets. We also examine the convexity properties of the forward stochastic reach set and its probability density. Motivated by the problem of a robot attempting to capture a stochastically moving, non-adversarial target, we demonstrate our method on two simple examples. Where traditional approaches provide approximations, our method provides exact analytical expressions for the densities and probability of capture. △ Less

Submitted 13 February, 2017; v1 submitted 14 October, 2016; originally announced October 2016.

Comments: V3: HSCC 2017 (camera-ready copy), DOI updated, minor changes | V2: Review comments included | V1: 10 pages, 12 figures

ACM Class: G.1.6; I.2.8; I.2.9

Computation of forward stochastic reach sets: Application to stochastic, dynamic obstacle avoidance

Authors: Baisravan HomChaudhuri, Abraham P. Vinod, Meeko M. K. Oishi

Abstract: We propose a method to efficiently compute the forward stochastic reach (FSR) set and its probability measure for nonlinear systems with an affine disturbance input, that is stochastic and bounded. This method is applicable to systems with an a priori known controller, or to uncontrolled systems, and often arises in problems in obstacle avoidance in mobile robotics. When used as a constraint in fi… ▽ More We propose a method to efficiently compute the forward stochastic reach (FSR) set and its probability measure for nonlinear systems with an affine disturbance input, that is stochastic and bounded. This method is applicable to systems with an a priori known controller, or to uncontrolled systems, and often arises in problems in obstacle avoidance in mobile robotics. When used as a constraint in finite horizon controller synthesis, the FSR set, and its probability measure facilitates probabilistic collision avoidance, in contrast to methods which presume the obstacles act in a worst-case fashion and generate hard constraints that cannot be violated. We tailor our approach to accommodate rigid body constraints, and show convexity is assured so long as the rigid body shape of each obstacle is also convex. We extend methods for multi-obstacle avoidance through mixed integer linear programming (with linear robot and obstacle dynamics) to accommodate chance constraints that represent the FSR set probability measure. We demonstrate our method on a rigid-body obstacle avoidance scenario, in which a receding horizon controller is designed to avoid several stochastically moving obstacles while reaching the desired goal. Our approach can provide solutions when approaches that presume a worst-case action from the obstacle fail. △ Less

Submitted 11 October, 2016; originally announced October 2016.

Comments: 9 pages, 10 figures, submitted to ACC 2017

A Low Complexity Spectrum Sensing Scheme for Estimating Frequency Band Edges in Multi-Standard Military Communication Receivers

Authors: S. J. Darak, A. P. Vinod, E. M-K. Lai

Abstract: In a typical multi-standard military communication receiver, fast and reliable spectrum sensing unit is required to extract the information of multiple channels (frequency bands) present in a wideband input signal. In this paper, an energy detector based on our reconfigurable filter bank, in [5], for detecting the edge frequencies of the channels is proposed. Simulation results are presented to sh… ▽ More In a typical multi-standard military communication receiver, fast and reliable spectrum sensing unit is required to extract the information of multiple channels (frequency bands) present in a wideband input signal. In this paper, an energy detector based on our reconfigurable filter bank, in [5], for detecting the edge frequencies of the channels is proposed. Simulation results are presented to show the trade-off between the time required to calculate edge frequencies of all the channels and the maximum normalized error in estimating the edge frequencies. The proposed method is compared with existing energy detector methods for complexity and performance. It is shown that, for a fixed number of input samples, error decreases with time in the proposed algorithm as compared to other methods where error is constant. Design examples and simulations show that the complexity of the proposed method is lower than the other methods for a given error in estimating the edge frequencies △ Less

Submitted 14 August, 2016; originally announced August 2016.

Comments: nternational Conference on Communication, Science and Information Engineering (CCSIE) , London

Design of Variable Bandpass Filters Using First Order Allpass Transformation And Coefficient Decimation

Authors: S. J. Darak, A. P. Vinod, E. M-K. Lai

Abstract: In this paper, the design of a computationally efficient variable bandpass digital filter is presented. The center frequency and bandwidth of this filter can be changed online without updating the filter coefficients. The warped filters, obtained by replacing each unit delay of a digital filter with an allpass filter, are widely used for various audio processing applications. However, warped filte… ▽ More In this paper, the design of a computationally efficient variable bandpass digital filter is presented. The center frequency and bandwidth of this filter can be changed online without updating the filter coefficients. The warped filters, obtained by replacing each unit delay of a digital filter with an allpass filter, are widely used for various audio processing applications. However, warped filters fail to provide variable bandwidth bandpass responses for a given center frequency using first order allpass transformation. To overcome this drawback, our design is accomplished by combining warped filter with the coefficient decimation technique. The design example shows that the proposed variable digital filter is simple to design and offers a total gate count reduction of 36% and 65% over the warped filters compared to the designs presented in [3] and [1] respectively △ Less

Submitted 14 August, 2016; originally announced August 2016.

Comments: 18th Electronics New Zealand Conference (ENZCON)

Combined Integer and Floating Point Multiplication Architecture(CIFM) for FPGAs and Its Reversible Logic Implementation

Authors: Himanshu Thapliyal, Hamid R. Arabnia, A. P Vinod

Abstract: In this paper, the authors propose the idea of a combined integer and floating point multiplier(CIFM) for FPGAs. The authors propose the replacement of existing 18x18 dedicated multipliers in FPGAs with dedicated 24x24 multipliers designed with small 4x4 bit multipliers. It is also proposed that for every dedicated 24x24 bit multiplier block designed with 4x4 bit multipliers, four redundant 4x4… ▽ More In this paper, the authors propose the idea of a combined integer and floating point multiplier(CIFM) for FPGAs. The authors propose the replacement of existing 18x18 dedicated multipliers in FPGAs with dedicated 24x24 multipliers designed with small 4x4 bit multipliers. It is also proposed that for every dedicated 24x24 bit multiplier block designed with 4x4 bit multipliers, four redundant 4x4 multiplier should be provided to enforce the feature of self repairability (to recover from the faults). In the proposed CIFM reconfigurability at run time is also provided resulting in low power. The major source of motivation for providing the dedicated 24x24 bit multiplier stems from the fact that single precision floating point multiplier requires 24x24 bit integer multiplier for mantissa multiplication. A reconfigurable, self-repairable 24x24 bit multiplier (implemented with 4x4 bit multiply modules) will ideally suit this purpose, making FPGAs more suitable for integer as well floating point operations. A dedicated 4x4 bit multiplier is also proposed in this paper. Moreover, in the recent years, reversible logic has emerged as a promising technology having its applications in low power CMOS, quantum computing, nanotechnology, and optical computing. It is not possible to realize quantum computing without reversible logic. Thus, this paper also paper provides the reversible logic implementation of the proposed CIFM. The reversible CIFM designed and proposed here will form the basis of the completely reversible FPGAs. △ Less

Submitted 14 October, 2006; originally announced October 2006.

Comments: Published in the proceedings of the The 49th IEEE International Midwest Symposium on Circuits and Systems (MWSCAS 2006), Puerto Rico, August 2006. Nominated for the Student Paper Award(12 papers are nominated for Student paper Award among all submissions)