-
X5G: An Open, Programmable, Multi-vendor, End-to-end, Private 5G O-RAN Testbed with NVIDIA ARC and OpenAirInterface
Authors:
Davide Villa,
Imran Khan,
Florian Kaltenberger,
Nicholas Hedberg,
Rúben Soares da Silva,
Stefano Maxenti,
Leonardo Bonati,
Anupa Kelkar,
Chris Dick,
Eduardo Baena,
Josep M. Jornet,
Tommaso Melodia,
Michele Polese,
Dimitrios Koutsonikolas
Abstract:
As Fifth generation (5G) cellular systems transition to softwarized, programmable, and intelligent networks, it becomes fundamental to enable public and private 5G deployments that are (i) primarily based on software components while (ii) maintaining or exceeding the performance of traditional monolithic systems and (iii) enabling programmability through bespoke configurations and optimized deploy…
▽ More
As Fifth generation (5G) cellular systems transition to softwarized, programmable, and intelligent networks, it becomes fundamental to enable public and private 5G deployments that are (i) primarily based on software components while (ii) maintaining or exceeding the performance of traditional monolithic systems and (iii) enabling programmability through bespoke configurations and optimized deployments. This requires hardware acceleration to scale the Physical (PHY) layer performance, programmable elements in the Radio Access Network (RAN) and intelligent controllers at the edge, careful planning of the Radio Frequency (RF) environment, as well as end-to-end integration and testing. In this paper, we describe how we developed the programmable X5G testbed, addressing these challenges through the deployment of the first 8-node network based on the integration of NVIDIA Aerial RAN CoLab (ARC), OpenAirInterface (OAI), and a near-real-time RAN Intelligent Controller (RIC). The Aerial Software Development Kit (SDK) provides the PHY layer, accelerated on Graphics Processing Unit (GPU), with the higher layers from the OAI open-source project interfaced with the PHY through the Small Cell Forum (SCF) Functional Application Platform Interface (FAPI). An E2 agent provides connectivity to the O-RAN Software Community (OSC) near-real-time RIC. We discuss software integration, the network infrastructure, and a digital twin framework for RF planning. We then profile the performance with up to 4 Commercial Off-the-Shelf (COTS) smartphones for each base station with iPerf and video streaming applications, measuring a cell rate higher than 500 Mbps in downlink and 45 Mbps in uplink.
△ Less
Submitted 22 June, 2024;
originally announced June 2024.
-
YotoR-You Only Transform One Representation
Authors:
José Ignacio Díaz Villa,
Patricio Loncomilla,
Javier Ruiz-del-Solar
Abstract:
This paper introduces YotoR (You Only Transform One Representation), a novel deep learning model for object detection that combines Swin Transformers and YoloR architectures. Transformers, a revolutionary technology in natural language processing, have also significantly impacted computer vision, offering the potential to enhance accuracy and computational efficiency. YotoR combines the robust Swi…
▽ More
This paper introduces YotoR (You Only Transform One Representation), a novel deep learning model for object detection that combines Swin Transformers and YoloR architectures. Transformers, a revolutionary technology in natural language processing, have also significantly impacted computer vision, offering the potential to enhance accuracy and computational efficiency. YotoR combines the robust Swin Transformer backbone with the YoloR neck and head. In our experiments, YotoR models TP5 and BP4 consistently outperform YoloR P6 and Swin Transformers in various evaluations, delivering improved object detection performance and faster inference speeds than Swin Transformer models. These results highlight the potential for further model combinations and improvements in real-time object detection with Transformers. The paper concludes by emphasizing the broader implications of YotoR, including its potential to enhance transformer-based models for image-related tasks.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Colosseum: The Open RAN Digital Twin
Authors:
Michele Polese,
Leonardo Bonati,
Salvatore D'Oro,
Pedram Johari,
Davide Villa,
Sakthivel Velumani,
Rajeev Gangula,
Maria Tsampazi,
Clifton Paul Robinson,
Gabriele Gemmi,
Andrea Lacava,
Stefano Maxenti,
Hai Cheng,
Tommaso Melodia
Abstract:
Recent years have witnessed the Open Radio Access Network (RAN) paradigm transforming the fundamental ways cellular systems are deployed, managed, and optimized. This shift is led by concepts such as openness, softwarization, programmability, interoperability, and intelligence of the network, all of which had never been applied to the cellular ecosystem before. The realization of the Open RAN visi…
▽ More
Recent years have witnessed the Open Radio Access Network (RAN) paradigm transforming the fundamental ways cellular systems are deployed, managed, and optimized. This shift is led by concepts such as openness, softwarization, programmability, interoperability, and intelligence of the network, all of which had never been applied to the cellular ecosystem before. The realization of the Open RAN vision into practical architectures, intelligent data-driven control loops, and efficient software implementations, however, is a multifaceted challenge, which requires (i) datasets to train Artificial Intelligence (AI) and Machine Learning (ML) models; (ii) facilities to test models without disrupting production networks; (iii) continuous and automated validation of the RAN software; and (iv) significant testing and integration efforts. This paper poses itself as a tutorial on how Colosseum - the world's largest wireless network emulator with hardware in the loop - can provide the research infrastructure and tools to fill the gap between the Open RAN vision, and the deployment and commercialization of open and programmable networks. We describe how Colosseum implements an Open RAN digital twin through a high-fidelity Radio Frequency (RF) channel emulator and end-to-end softwarized O-RAN and 5G-compliant protocol stacks, thus allowing users to reproduce and experiment upon topologies representative of real-world cellular deployments. Then, we detail the twinning infrastructure of Colosseum, as well as the automation pipelines for RF and protocol stack twinning. Finally, we showcase a broad range of Open RAN use cases implemented on Colosseum, including the real-time connection between the digital twin and real-world networks, and the development, prototy**, and testing of AI/ML solutions for Open RAN.
△ Less
Submitted 26 April, 2024;
originally announced April 2024.
-
Securing O-RAN Open Interfaces
Authors:
Joshua Groen,
Salvatore D'Oro,
Utku Demir,
Leonardo Bonati,
Davide Villa,
Michele Polese,
Tommaso Melodia,
Kaushik Chowdhury
Abstract:
The next generation of cellular networks will be characterized by openness, intelligence, virtualization, and distributed computing. The Open Radio Access Network (Open RAN) framework represents a significant leap toward realizing these ideals, with prototype deployments taking place in both academic and industrial domains. While it holds the potential to disrupt the established vendor lock-ins, O…
▽ More
The next generation of cellular networks will be characterized by openness, intelligence, virtualization, and distributed computing. The Open Radio Access Network (Open RAN) framework represents a significant leap toward realizing these ideals, with prototype deployments taking place in both academic and industrial domains. While it holds the potential to disrupt the established vendor lock-ins, Open RAN's disaggregated nature raises critical security concerns. Safeguarding data and securing interfaces must be integral to Open RAN's design, demanding meticulous analysis of cost/benefit tradeoffs.
In this paper, we embark on the first comprehensive investigation into the impact of encryption on two pivotal Open RAN interfaces: the E2 interface, connecting the base station with a near-real-time RAN Intelligent Controller, and the Open Fronthaul, connecting the Radio Unit to the Distributed Unit. Our study leverages a full-stack O-RAN ALLIANCE compliant implementation within the Colosseum network emulator and a production-ready Open RAN and 5G-compliant private cellular network. This research contributes quantitative insights into the latency introduced and throughput reduction stemming from using various encryption protocols. Furthermore, we present four fundamental principles for constructing security by design within Open RAN systems, offering a roadmap for navigating the intricate landscape of Open RAN security.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
An Open, Programmable, Multi-vendor 5G O-RAN Testbed with NVIDIA ARC and OpenAirInterface
Authors:
Davide Villa,
Imran Khan,
Florian Kaltenberger,
Nicholas Hedberg,
Ruben Soares da Silva,
Anupa Kelkar,
Chris Dick,
Stefano Basagni,
Josep M. Jornet,
Tommaso Melodia,
Michele Polese,
Dimitrios Koutsonikolas
Abstract:
The transition of fifth generation (5G) cellular systems to softwarized, programmable, and intelligent networks depends on successfully enabling public and private 5G deployments that are (i) fully software-driven and (ii) with a performance at par with that of traditional monolithic systems. This requires hardware acceleration to scale the Physical (PHY) layer performance, end-to-end integration…
▽ More
The transition of fifth generation (5G) cellular systems to softwarized, programmable, and intelligent networks depends on successfully enabling public and private 5G deployments that are (i) fully software-driven and (ii) with a performance at par with that of traditional monolithic systems. This requires hardware acceleration to scale the Physical (PHY) layer performance, end-to-end integration and testing, and careful planning of the Radio Frequency (RF) environment. In this paper, we describe how the X5G testbed at Northeastern University has addressed these challenges through the first 8-node network deployment of the NVIDIA Aerial RAN CoLab (ARC), with the Aerial Software Development Kit (SDK) for the PHY layer, accelerated on Graphics Processing Unit (GPU), and through its integration with higher layers from the OpenAirInterface (OAI) open-source project through the Small Cell Forum (SCF) Functional Application Platform Interface (FAPI). We discuss software integration, the network infrastructure, and a digital twin framework for RF planning. We then profile the performance with up to 4 Commercial Off-the-Shelf (COTS) smartphones for each base station with iPerf and video streaming applications, measuring a cell rate higher than 500 Mbps in downlink and 45 Mbps in uplink.
△ Less
Submitted 14 March, 2024; v1 submitted 25 October, 2023;
originally announced October 2023.
-
Demo: Intelligent Radar Detection in CBRS Band in the Colosseum Wireless Network Emulator
Authors:
Davide Villa,
Daniel Uvaydov,
Leonardo Bonati,
Pedram Johari,
Josep Miquel Jornet,
Tommaso Melodia
Abstract:
The ever-growing number of wireless communication devices and technologies demands spectrum-sharing techniques. Effective coexistence management is crucial to avoid harmful interference, especially with critical systems like nautical and aerial radars in which incumbent radios operate mission-critical communication links. In this demo, we showcase a framework that leverages Colosseum, the world's…
▽ More
The ever-growing number of wireless communication devices and technologies demands spectrum-sharing techniques. Effective coexistence management is crucial to avoid harmful interference, especially with critical systems like nautical and aerial radars in which incumbent radios operate mission-critical communication links. In this demo, we showcase a framework that leverages Colosseum, the world's largest wireless network emulator with hardware-in-the-loop, as a playground to study commercial radar waveforms coexisting with a cellular network in CBRS band in complex environments. We create an ad-hoc high-fidelity spectrum-sharing scenario for this purpose. We deploy a cellular network to collect IQ samples with the aim of training an ML agent that runs at the base station. The agent has the goal of detecting incumbent radar transmissions and vacating the cellular bandwidth to avoid interfering with the radar operations. Our experiment results show an average detection accuracy of 88%, with an average detection time of 137 ms.
△ Less
Submitted 12 October, 2023; v1 submitted 15 September, 2023;
originally announced September 2023.
-
Twinning Commercial Radio Waveforms in the Colosseum Wireless Network Emulator
Authors:
Davide Villa,
Daniel Uvaydov,
Leonardo Bonati,
Pedram Johari,
Josep Miquel Jornet,
Tommaso Melodia
Abstract:
Because of the ever-growing amount of wireless consumers, spectrum-sharing techniques have been increasingly common in the wireless ecosystem, with the main goal of avoiding harmful interference to coexisting communication systems. This is even more important when considering systems, such as nautical and aerial fleet radars, in which incumbent radios operate mission-critical communication links.…
▽ More
Because of the ever-growing amount of wireless consumers, spectrum-sharing techniques have been increasingly common in the wireless ecosystem, with the main goal of avoiding harmful interference to coexisting communication systems. This is even more important when considering systems, such as nautical and aerial fleet radars, in which incumbent radios operate mission-critical communication links. To study, develop, and validate these solutions, adequate platforms, such as the Colosseum wireless network emulator, are key as they enable experimentation with spectrum-sharing heterogeneous radio technologies in controlled environments. In this work, we demonstrate how Colosseum can be used to twin commercial radio waveforms to evaluate the coexistence of such technologies in complex wireless propagation environments. To this aim, we create a high-fidelity spectrum-sharing scenario on Colosseum to evaluate the impact of twinned commercial radar waveforms on a cellular network operating in the CBRS band. Then, we leverage IQ samples collected on the testbed to train a machine learning agent that runs at the base station to detect the presence of incumbent radar transmissions and vacate the bandwidth to avoid causing them harmful interference. Our results show an average detection accuracy of 88%, with accuracy above 90% in SNR regimes above 0 dB and SINR regimes above -20 dB, and with an average detection time of 137 ms.
△ Less
Submitted 12 October, 2023; v1 submitted 8 August, 2023;
originally announced August 2023.
-
Use of Tracker software for teaching distance physics laboratories: Demonstration of error reduction in the simple pendulum
Authors:
Ariatna Zamalloa,
Gerson Cruz,
Juan Camani,
Valery Almanza,
Bryan Gonzales,
Diego Villa,
Bruce Warthon
Abstract:
This study focuses on evaluating three methods used to determine the theoretical gravity in the city of Cusco and their importance in distance education. The first method is based on Newton's law of universal gravitation, obtaining a theoretical gravity value of 9.7836 m/s^2. The second method employs a simple pendulum, which provides an estimation close to the theoretical value. The third method…
▽ More
This study focuses on evaluating three methods used to determine the theoretical gravity in the city of Cusco and their importance in distance education. The first method is based on Newton's law of universal gravitation, obtaining a theoretical gravity value of 9.7836 m/s^2. The second method employs a simple pendulum, which provides an estimation close to the theoretical value. The third method uses the Tracker software to analyze the pendulum's motion, offering higher precision in measurements.
The significance of this research in distance education lies in the need for effective tools and strategies to teach practical subjects like physics. Both the simple pendulum and Tracker software provide viable solutions for conducting experiments and data analysis remotely. These tools allow students to acquire theoretical and practical knowledge, develop measurement and data analysis skills to promote more meaningful learning.
△ Less
Submitted 10 June, 2023;
originally announced June 2023.
-
Accelerating Simulation-Driven Optimisation of Marine Propellers Using Shape-Supervised Dimension Reduction
Authors:
Shahroz Khan,
Stefano Gaggero,
Panagiotis Kaklis,
Giuliano Vernengo,
Diego Villa
Abstract:
Simulation-driven shape optimisation (SDSO) of marine propellers is often obstructed by high-dimensional design spaces stemming from its complex geometry and baseline parameterisation, which leads to the notorious curse of dimensionality. In this study, we propose using the shape-supervised dimension reduction (SSDR) approach to expedite the SDSO of marine propellers by extracting latent features…
▽ More
Simulation-driven shape optimisation (SDSO) of marine propellers is often obstructed by high-dimensional design spaces stemming from its complex geometry and baseline parameterisation, which leads to the notorious curse of dimensionality. In this study, we propose using the shape-supervised dimension reduction (SSDR) approach to expedite the SDSO of marine propellers by extracting latent features for a lower-dimensional subspace. SSDR is different from other dimension reduction approaches as it utilises a shape-signature vector function, which consists of a shape modification function and geometric moments, maximising the retained geometric and physical information in the subspace. The resulting shape-supervised subspace from SSDR enables us to efficiently and effectively find an optimal design in appropriate areas of the design space. The feasibility of the proposed method is tested for the E779A propeller parameterised with 40 design parameters with the objective to maximise efficiency while reducing suction side cavitation. The results demonstrate that the shape-supervised subspace achieved an 87.5% reduction in the original design space's dimensionality, resulting in faster optimisation convergence.
△ Less
Submitted 13 May, 2023;
originally announced May 2023.
-
Colosseum as a Digital Twin: Bridging Real-World Experimentation and Wireless Network Emulation
Authors:
Davide Villa,
Miead Tehrani-Moayyed,
Clifton Paul Robinson,
Leonardo Bonati,
Pedram Johari,
Michele Polese,
Tommaso Melodia
Abstract:
Wireless network emulators are being increasingly used for develo** and evaluating new solutions for Next Generation (NextG) wireless networks. However, the reliability of the solutions tested on emulation platforms heavily depends on the precision of the emulation process, model design, and parameter settings. To address, obviate, or minimize the impact of errors of emulation models, in this wo…
▽ More
Wireless network emulators are being increasingly used for develo** and evaluating new solutions for Next Generation (NextG) wireless networks. However, the reliability of the solutions tested on emulation platforms heavily depends on the precision of the emulation process, model design, and parameter settings. To address, obviate, or minimize the impact of errors of emulation models, in this work, we apply the concept of Digital Twin (DT) to large-scale wireless systems. Specifically, we demonstrate the use of Colosseum, the world's largest wireless network emulator with hardware-in-the-loop, as a DT for NextG experimental wireless research at scale. As proof of concept, we leverage the Channel emulation scenario generator and Sounder Toolchain (CaST) to create the DT of a publicly available over-the-air indoor testbed for sub-6 GHz research, namely, Arena. Then, we validate the Colosseum DT through experimental campaigns on emulated wireless environments, including scenarios concerning cellular networks and jamming of Wi-Fi nodes, on both the real and digital systems. Our experiments show that the DT is able to provide a faithful representation of the real-world setup, obtaining an average similarity of up to 0.987 in throughput and 0.982 in Signal to Interference plus Noise Ratio (SINR).
△ Less
Submitted 23 January, 2024; v1 submitted 29 March, 2023;
originally announced March 2023.
-
Bluetooth Low Energy mesh network for power-limited, robust and reliable IoT services
Authors:
Davide Villa,
Chih-Kuang Lin,
Adam Kuenzi,
Michael Lang
Abstract:
Bluetooth Low Energy (BLE) is an emerging wireless technology created for short-range control and monitoring applications that is becoming increasingly widespread among the Internet of Things (IoT) services because of its low-cost and low-energy consumption. In this paper, we propose a novel neighbor discovery scheme and failure recovery techniques for multi-path and single-path low-power and reli…
▽ More
Bluetooth Low Energy (BLE) is an emerging wireless technology created for short-range control and monitoring applications that is becoming increasingly widespread among the Internet of Things (IoT) services because of its low-cost and low-energy consumption. In this paper, we propose a novel neighbor discovery scheme and failure recovery techniques for multi-path and single-path low-power and reliable BLE networks. By exploiting energy-efficient access control and fast and robust routing ideas with adaptive failure recovery, the proposed methods outperform the well-known flooding approach used by the BLE Mesh standard. We show varying improvements in packet latency and power consumption in event-driven simulations as network topology and traffic changes. The failure recovery approaches proposed are optimized and demonstrated during the simulations, showing the varying of the overall failure recovery latency and node power consumption in different use cases.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
CaST: A Toolchain for Creating and Characterizing Realistic Wireless Network Emulation Scenarios
Authors:
Davide Villa,
Miead Tehrani-Moayyed,
Pedram Johari,
Stefano Basagni,
Tommaso Melodia
Abstract:
Large-scale wireless testbeds are being increasingly used in develo** and evaluating new solutions for next generation wireless networks. Among others, high-fidelity FPGA-based emulation platforms have unique capabilities for faithfully modeling real-world wireless environments in real-time and at scale, while guaranteeing repeatability. However, the reliability of the solutions tested on emulat…
▽ More
Large-scale wireless testbeds are being increasingly used in develo** and evaluating new solutions for next generation wireless networks. Among others, high-fidelity FPGA-based emulation platforms have unique capabilities for faithfully modeling real-world wireless environments in real-time and at scale, while guaranteeing repeatability. However, the reliability of the solutions tested on emulation platforms heavily depends on the precision of the emulation process, which is often overlooked. To address this unmet need in wireless network emulator-based experiments, in this paper we present CaST, a Channel emulation generator and Sounder Toolchain for creating and characterizing realistic wireless network scenarios with high accuracy. CaST consists of (i) a framework for creating mobile wireless scenarios from ray-tracing models for FPGA-based emulation platforms, and (ii) a containerized Software Defined Radio-based channel sounder to precisely characterize the emulated channels. We demonstrate the use of CaST by designing, deploying and validating multi-path mobile scenarios on Colosseum, the world's largest wireless network emulator. Results show that CaST achieves <= 20 ns accuracy in sounding Channel Impulse Response tap delays, and 0.5 dB accuracy in measuring tap gains.
△ Less
Submitted 28 August, 2022; v1 submitted 8 August, 2022;
originally announced August 2022.
-
Colosseum: Large-Scale Wireless Experimentation Through Hardware-in-the-Loop Network Emulation
Authors:
Leonardo Bonati,
Pedram Johari,
Michele Polese,
Salvatore D'Oro,
Subhramoy Mohanti,
Miead Tehrani-Moayyed,
Davide Villa,
Shweta Shrivastava,
Chinenye Tassie,
Kurt Yoder,
Ajeet Bagga,
Paresh Patel,
Ventz Petkov,
Michael Seltser,
Francesco Restuccia,
Abhimanyu Gosain,
Kaushik R. Chowdhury,
Stefano Basagni,
Tommaso Melodia
Abstract:
Colosseum is an open-access and publicly-available large-scale wireless testbed for experimental research via virtualized and softwarized waveforms and protocol stacks on a fully programmable, "white-box" platform. Through 256 state-of-the-art software-defined radios and a massive channel emulator core, Colosseum can model virtually any scenario, enabling the design, development and testing of sol…
▽ More
Colosseum is an open-access and publicly-available large-scale wireless testbed for experimental research via virtualized and softwarized waveforms and protocol stacks on a fully programmable, "white-box" platform. Through 256 state-of-the-art software-defined radios and a massive channel emulator core, Colosseum can model virtually any scenario, enabling the design, development and testing of solutions at scale in a variety of deployments and channel conditions. These Colosseum radio-frequency scenarios are reproduced through high-fidelity FPGA-based emulation with finite-impulse response filters. Filters model the taps of desired wireless channels and apply them to the signals generated by the radio nodes, faithfully mimicking the conditions of real-world wireless environments. In this paper, we introduce Colosseum as a testbed that is for the first time open to the research community. We describe the architecture of Colosseum and its experimentation and emulation capabilities. We then demonstrate the effectiveness of Colosseum for experimental research at scale through exemplary use cases including prevailing wireless technologies (e.g., cellular and Wi-Fi) in spectrum sharing and unmanned aerial vehicle scenarios. A roadmap for Colosseum future updates concludes the paper.
△ Less
Submitted 14 December, 2021; v1 submitted 20 October, 2021;
originally announced October 2021.
-
CardiSort: a convolutional neural network for cross vendor automated sorting of cardiac MR images
Authors:
Ruth P Lim,
Stefan Kachel,
Adriana DM Villa,
Leighton Kearney,
Nuno Bettencourt,
Alistair A Young,
Amedeo Chiribiri,
Cian M Scannell
Abstract:
Objectives: To develop an image-based automatic deep learning method to classify cardiac MR images by sequence type and imaging plane for improved clinical post-processing efficiency. Methods: Multi-vendor cardiac MRI studies were retrospectively collected from 4 centres and 3 vendors. A two-head convolutional neural network ('CardiSort') was trained to classify 35 sequences by imaging sequence (n…
▽ More
Objectives: To develop an image-based automatic deep learning method to classify cardiac MR images by sequence type and imaging plane for improved clinical post-processing efficiency. Methods: Multi-vendor cardiac MRI studies were retrospectively collected from 4 centres and 3 vendors. A two-head convolutional neural network ('CardiSort') was trained to classify 35 sequences by imaging sequence (n=17) and plane (n=10). Single vendor training (SVT) on single centre images (n=234 patients) and multi-vendor training (MVT) with multicentre images (n = 479 patients, 3 centres) was performed. Model accuracy was compared to manual ground truth labels by an expert radiologist on a hold-out test set for both SVT and MVT. External validation of MVT (MVTexternal) was performed on data from 3 previously unseen magnet systems from 2 vendors (n=80 patients). Results: High sequence and plane accuracies were observed for SVT (85.2% and 93.2% respectively), and MVT (96.5% and 98.1% respectively) on the hold-out test set. MVTexternal yielded sequence accuracy of 92.7% and plane accuracy of 93.0%. There was high accuracy for common sequences and conventional cardiac planes. Poor accuracy was observed for underrepresented classes and sequences where there was greater variability in acquisition parameters across centres, such as perfusion imaging. Conclusions: A deep learning network was developed on multivendor data to classify MRI studies into component sequences and planes, with external validation. With refinement, it has potential to improve workflow by enabling automated sequence selection, an important first step in completely automated post-processing pipelines.
△ Less
Submitted 8 April, 2022; v1 submitted 17 September, 2021;
originally announced September 2021.
-
Internet of Robotic Things: Current Technologies, Applications, Challenges and Future Directions
Authors:
Davide Villa,
Xinchao Song,
Matthew Heim,
Liangshe Li
Abstract:
Nowadays, the Internet of Things (IoT) concept is gaining more and more notoriety bringing the number of connected devices to reach the order of billion units. Its smart technology is influencing the research and developments of advanced solutions in many areas. This paper focuses on the merger between the IoT and robotics named the Internet of Robotic Things (IoRT). Allowing robotic systems to co…
▽ More
Nowadays, the Internet of Things (IoT) concept is gaining more and more notoriety bringing the number of connected devices to reach the order of billion units. Its smart technology is influencing the research and developments of advanced solutions in many areas. This paper focuses on the merger between the IoT and robotics named the Internet of Robotic Things (IoRT). Allowing robotic systems to communicate over the internet at a minimal cost is an important technological opportunity. Robots can use the cloud to improve the overall performance and for offloading demanding tasks. Since communicating to the cloud results in latency, data loss, and energy loss, finding efficient techniques is a concern that can be addressed with current machine learning methodologies. Moreover, the use of robotic generates ethical and regulation questions that should be answered for a proper coexistence between humans and robots. This paper aims at providing a better understanding of the new concept of IoRT with its benefits and limitations, as well as guidelines and directions for future research and studies.
△ Less
Submitted 15 January, 2021;
originally announced January 2021.
-
A Near-Ideal Molecule-Based Haldane Spin-Chain
Authors:
Robert C. Williams,
William J. A. Blackmore,
Samuel P. M. Curley,
Martin R. Lees,
Serena M. Birnbaum,
John Singleton,
Benjamin M. Huddart,
Thomas J. Hicken,
Tom Lancaster,
Stephen J. Blundell,
Fan Xiao,
Andrew Ozarowski,
Francis L. Pratt,
David J. Voneshen,
Zurab Guguchia,
Christopher Baines,
John A. Schlueter,
Danielle Y. Villa,
Jamie L. Manson,
Paul A. Goddard
Abstract:
The molecular coordination complex NiI$_2$(3,5-lut)$_4$ [where (3,5-lut) $=$ (3,5-lutidine) $=$ (C$_7$H$_9$N)] has been synthesized and characterized by several techniques including synchrotron X-ray diffraction, ESR, SQUID magnetometry, pulsed-field magnetization, inelastic neutron scattering and muon spin relaxation. Templated by the configuration of 3,5-lut ligands the molecules pack in-registr…
▽ More
The molecular coordination complex NiI$_2$(3,5-lut)$_4$ [where (3,5-lut) $=$ (3,5-lutidine) $=$ (C$_7$H$_9$N)] has been synthesized and characterized by several techniques including synchrotron X-ray diffraction, ESR, SQUID magnetometry, pulsed-field magnetization, inelastic neutron scattering and muon spin relaxation. Templated by the configuration of 3,5-lut ligands the molecules pack in-registry with the Ni--I$\cdots$I--Ni chains aligned along the $c$--axis. This arrangement leads to through-space I$\cdots$I magnetic coupling which is directly measured for the first time in this work. The net result is a near-ideal realization of the $S = 1$ Haldane chain with $J = 17.5~\rm{K}$ and energy gaps of $Δ^{\parallel} = 5.3~{\rm K}$ $Δ^{\perp} =7.7~{\rm K}$, split by the easy-axis single-ion anisotropy $D=-1.2~{\rm K}$. The ratio $D/J = -0.07$ affords one of the most isotropic Haldane systems yet discovered, while the ratio $Δ_0/J = 0.40(1)$ (where $Δ_0$ is the average gap size) is close to its ideal theoretical value, suggesting a very high degree of magnetic isolation of the spin chains in this material. The Haldane gap is closed by orientation-dependent critical fields $μ_0H_{\rm c}^{\parallel} = 5.3~\rm{T}$ and $μ_0H_{\rm c}^{\perp} = 4.3~\rm{T}$, which are readily accessible experimentally and permit investigations across the entirety of the Haldane phase, with the fully polarized state occurring at $μ_0 H_{\rm s}^{\parallel}=46.0~\rm{T}$ and $μ_0 H_{\rm s}^{\perp}=50.7~\rm{T}$. The results are explicable within the so-called fermion model, in contrast to other reported easy-axis Haldane systems. Zero-field magnetic order is absent down to $20~{\rm mK}$ and emergent end-chain effects are observed in the gapped state, as evidenced by detailed low-temperature measurements.
△ Less
Submitted 17 September, 2019;
originally announced September 2019.
-
Determining the anisotropy and exchange parameters of polycrystalline spin-1 magnets
Authors:
William J. A. Blackmore,
Jamie Brambleby,
Tom Lancaster,
Stewart J. Clark,
Roger D. Johnson,
John Singleton,
Andrew Ozarowski,
John A. Schlueter,
Yu-Shen Cheng,
Atta M. Arif,
Saul Lapidus,
Fan Xiao,
Robert C. Williams,
Stephen J. Blundell,
Matthew J. Pearce,
Martin R. Lees,
Pascal Manuel,
Danielle Y. Villa,
Jacqueline A. Villa,
Jamie L. Manson,
Paul A. Goddard
Abstract:
Although low-dimensional $S = 1$ antiferromagnets remain of great interest, difficulty in obtaining high-quality single crystals of the newest materials hinders experimental research in this area. Polycrystalline samples are more readily produced, but there are inherent problems in extracting the magnetic properties of anisotropic systems from powder data. Following a discussion of the effect of p…
▽ More
Although low-dimensional $S = 1$ antiferromagnets remain of great interest, difficulty in obtaining high-quality single crystals of the newest materials hinders experimental research in this area. Polycrystalline samples are more readily produced, but there are inherent problems in extracting the magnetic properties of anisotropic systems from powder data. Following a discussion of the effect of powder-averaging on various measurement techniques, we present a methodology to overcome this issue using thermodynamic measurements. In particular we focus on whether it is possible to characterise the magnetic properties of polycrystalline, anisotropic samples using readily available laboratory equipment. We test the efficacy of our method using the magnets [Ni(H$_{2}$O)$_{2}$(3,5-lutidine)$_{4}$](BF$_{4}$)$_{2}$ and Ni(H$_{2}$O)$_{2}$(acetate)$_{2}$(4-picoline)$_{2}$, which have negligible exchange interactions, as well as the antiferromagnet [Ni(H$_{2}$O)$_{2}$(pyrazine)$_{2}$](BF$_{4}$)$_{2}$, and show that we are able to extract the anisotropy parameters in each case. The results obtained from the thermodynamic measurements are checked against electron-spin resonance and neutron diffraction. We also present a density functional method, which incorporates spin-orbit coupling to estimate the size of the anisotropy in [Ni(H$_{2}$O)$_{2}$(pyrazine)$_{2}$](BF$_{4}$)$_{2}$.
△ Less
Submitted 24 June, 2019;
originally announced June 2019.
-
Hierarchical Bayesian myocardial perfusion quantification
Authors:
Cian M. Scannell,
Amedeo Chiribiri,
Adriana D. M. Villa,
Marcel Breeuwer,
Jack Lee
Abstract:
Purpose: Tracer-kinetic models can be used for the quantitative assessment of contrast-enhanced MRI data. However, the model-fitting can produce unreliable results due to the limited data acquired and the high noise levels. Such problems are especially prevalent in myocardial perfusion MRI leading to the compromise of constrained numerical deconvolutions and segmental signal averaging being common…
▽ More
Purpose: Tracer-kinetic models can be used for the quantitative assessment of contrast-enhanced MRI data. However, the model-fitting can produce unreliable results due to the limited data acquired and the high noise levels. Such problems are especially prevalent in myocardial perfusion MRI leading to the compromise of constrained numerical deconvolutions and segmental signal averaging being commonly used as alternatives to the more complex tracer-kinetic models. Methods: In this work, the use of hierarchical Bayesian inference for the parameter estimation is explored. It is shown that with Bayesian inference it is possible to reliably fit the two-compartment exchange model to perfusion data. The use of prior knowledge on the ranges of kinetic parameters and the fact that neighbouring voxels are likely to have similar kinetic properties combined with a Markov chain Monte Carlo based fitting procedure significantly improves the reliability of the perfusion estimates with compared to the traditional least-squares approach. The method is assessed using both simulated and patient data. Results: The average (standard deviation) normalised mean square error for the distinct noise realisations of a simulation phantom falls from 0.32 (0.55) with the least-squares fitting to 0.13 (0.2) using Bayesian inference. The assessment of the presence of coronary artery disease based purely on the quantitative MBF maps obtained using Bayesian inference matches the visual assessment in all 24 slices. When using the maps obtained by the least-squares fitting, a corresponding assessment is only achieved in 16/24 slices. Conclusion: Bayesian inference allows a reliable, fully automated and user-independent assessment of myocardial perfusion on a voxel-wise level using the two-compartment exchange model.
△ Less
Submitted 21 November, 2019; v1 submitted 6 June, 2019;
originally announced June 2019.
-
Diseño de un espacio semántico sobre la base de la Wikipedia. Una propuesta de análisis de la semántica latente para el idioma español
Authors:
Dalina Aidee Villa,
Igor Barahona,
Luis Javier Álvarez
Abstract:
Latent Semantic Analysis (LSA) was initially conceived by the cognitive psychology at the 90s decade. Since its emergence, the LSA has been used to model cognitive processes, pointing out academic texts, compare literature works and analyse political speeches, among other applications. Taking as starting point multivariate method for dimensionality reduction, this paper propose a semantic space fo…
▽ More
Latent Semantic Analysis (LSA) was initially conceived by the cognitive psychology at the 90s decade. Since its emergence, the LSA has been used to model cognitive processes, pointing out academic texts, compare literature works and analyse political speeches, among other applications. Taking as starting point multivariate method for dimensionality reduction, this paper propose a semantic space for Spanish language. Out results include a document text matrix with dimensions 1.3 x10^6 and 5.9x10^6, which later is decomposed into singular values. Those singular values are used to semantically words or text.
△ Less
Submitted 28 January, 2019;
originally announced February 2019.
