Showing 1–39 of 39 results for author: Vilatela, J J

Gas-to-nanotextile: high-performance materials from floating 1D nanoparticles

Authors: Isabel Gómez-Palos, Miguel Vazquez-Pufleau, Richard S Schäufele, Anastasiia Mikhalchan, Afshin Pendashteh, Álvaro Ridruejo, Juan J. Vilatela

Abstract: Suspended in the gas phase, 1D inorganic nanoparticles (nanotubes and nanowires) grow to hundreds of microns in a second and can be thus directly assembled into freestanding network materials. The corresponding process continuously transforms gas precursors into aerosols into aerogels into macroscopic nanotextiles. By enabling the assembly of very high aspect ratio nanoparticles, this processing r… ▽ More Suspended in the gas phase, 1D inorganic nanoparticles (nanotubes and nanowires) grow to hundreds of microns in a second and can be thus directly assembled into freestanding network materials. The corresponding process continuously transforms gas precursors into aerosols into aerogels into macroscopic nanotextiles. By enabling the assembly of very high aspect ratio nanoparticles, this processing route has translated into high-performance structural materials, transparent conductors and battery anodes, amongst other embodiments. This paper reviews progress in the application of such manufacturing process to nanotubes and nanowires. It analyses 1D nanoparticle growth through floating catalyst chemical vapour deposition (FCCVD), in terms of reaction selectivity, scalability and its inherently ultra-fast growth rates (107-108 atoms per second) up to 1000 times faster than for substrate CVD. We summarise emerging descriptions of the formation of aerogels through percolation theory and multi-scale models for the collision and aggregation of 1D nanoparticles. The paper shows that macroscopic ensembles of 1D nanoparticles resemble textiles in their porous network structure, high flexibility and damage-tolerance. Their bulk properties depend strongly on inter-particle properties and are dominated by alignment and volume fraction. Selected examples of nanotextiles that surpass granular and monolithic materials include structural fibres with polymer-like toughness, transparent conductors, and slurry-free composite electrodes for energy storage. △ Less

Submitted 10 April, 2023; originally announced April 2023.

Comments: 36 pages, 25 figures

Journal ref: I. Gómez-Palos, M. Vazquez-Pufleau, R. S. Schäufele, A. Mikhalchan, A. Pendashteh, Á. Ridruejo and J. J. Vilatela, Nanoscale, 2023, 15, 6052-6074

Spark Discharge Generator as a Stable and Reliable Nanoparticle Synthesis Device: Analysis of the Impact of Process and Circuit Variables on the Characteristics of Synthesized Nanoparticles

Authors: Miguel Vazquez-Pufleau, Isabel Gomez-Palos, Luis Arevalo, Javier Garcia-Labanda, Juan Jose Vilatela

Abstract: Nanotechnology offers the promise of harnessing quantum properties not available in the bulk phase. These desirable properties are highly dependent on size and composition. Generators that control these variables are therefore essential for progress in the field. The spark discharge generator (SDG) is an outstanding aerosol route for nanoparticle synthesis, which stands out due to its fast kinetic… ▽ More Nanotechnology offers the promise of harnessing quantum properties not available in the bulk phase. These desirable properties are highly dependent on size and composition. Generators that control these variables are therefore essential for progress in the field. The spark discharge generator (SDG) is an outstanding aerosol route for nanoparticle synthesis, which stands out due to its fast kinetics, scalability, high purity, accuracy and reproducibility with the added advantage of allowing the synthesis of nanoparticles of any conducting material. These advantages are a consequence of its vast heating and cooling rates, its intrinsic and easily controllable electronic variables at the reach of a click. However, the mechanistic impact of these variables on the actual aerosol generated is still not fully understood. In this work, we constructed an SDG and systematically studied its behavior with particular interest in the effect that resistance, capacitance, inductance, flow rate, gap separation and current have on the electrical behavior of the spark. Our model system produced primarily Fe and Cu nanoparticles with measured concentrations. We discuss how the spark influences particle size and number concentration and provide useful correlations that link dependent with independent variables. Remarkably, a finite resistance produces a maximum in the output of the generated aerosols. This suggests a direct link between RLC properties of the circuit and cabling into the frequency of the spark, and nanoparticle number concentration, indicating potential for exploiting such behavior towards maximizing nanoparticle generation. Furthermore, we discuss a link between spark oscillations and energy release with its consequent aerosol generation. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Comments: SI included at the end

Journal ref: Advanced Powder Technology 34.3 (2023): 103955

Ultrafast synthesis of SiC nanowire webs by floating catalysts rationalised through in-situ measurements and thermodynamic calculations

Authors: Isabel Gómez-Palos, Miguel Vazquez-Pufleau, Jorge Valilla, Álvaro Ridruejo, Damien Tourret, Juan J. Vilatela

Abstract: This work presents the synthesis of SiC nanowires floating in a gas stream through the vapour-liquid-solid (VLS) mechanism using an aerosol of catalyst nanoparticles. These conditions lead to ultrafast growth at 8.5 μm/s (maximum of 50 μm/s), which is up to 3 orders of magnitude above conventional substrate-based chemical vapour deposition. The high aspect ratio of the nanowires (up to 2200) favou… ▽ More This work presents the synthesis of SiC nanowires floating in a gas stream through the vapour-liquid-solid (VLS) mechanism using an aerosol of catalyst nanoparticles. These conditions lead to ultrafast growth at 8.5 μm/s (maximum of 50 μm/s), which is up to 3 orders of magnitude above conventional substrate-based chemical vapour deposition. The high aspect ratio of the nanowires (up to 2200) favours their entanglement and the formation of freestanding network materials consisting entirely of SiCNWs. The floating catalyst chemical vapour deposition growth process is rationalised through in-situ sampling of reaction products and catalyst aerosol from the gas phase, and thermodynamic calculations of the bulk ternary Si-C-Fe phase diagram. The phase diagram suggests a description of the mechanistic path for the selective growth of SiCNWs, consistent with the observation that no other types of nanowires (Si or C) are grown by the catalyst. SiCNW growth occurs at 1130 °C, close to the calculated eutectic. According to the calculated phase diagram, upon addition of Si and C, the Fe-rich liquid segregates a carbon shell, and later enrichment of the liquid in Si leads to the formation of SiC. The exceptionally fast growth rate relative to substrate-based processes is attributed to the increased availability of precursors for incorporation into the catalyst due to the high collision rate inherent to this new synthesis mode. △ Less

Submitted 6 December, 2022; originally announced December 2022.

Comments: 23 pages, 19 Figures, main manuscript and supporting information

Eliminating solvents and polymers in high-performance Si anodes by gas-phase assembly of nanowire fabrics

Authors: Moumita Rana, Afshin Pendashteh, Richard Schäufele, Joaquim Gispert, Juan J. Vilatela

Abstract: Develo** sustainable battery electrode manufacturing methods is particularly pressing for alloying-type active materials, such as silicon, which often require additional energy-intensive and solvent-based processing to reinforce them with a buffer matrix. This work introduces a new method to fabricate Si anodes as continuous, tough fabrics of arbitrary thickness, without processing solvents, pol… ▽ More Develo** sustainable battery electrode manufacturing methods is particularly pressing for alloying-type active materials, such as silicon, which often require additional energy-intensive and solvent-based processing to reinforce them with a buffer matrix. This work introduces a new method to fabricate Si anodes as continuous, tough fabrics of arbitrary thickness, without processing solvents, polymeric binders, carbon additive, or any reinforcing matrix. The anodes consist of percolated networks of long Si nanowires directly assembled from suspension in the gas phase, where they are grown via floating catalyst chemical vapour deposition. A high Si content above 75 wt.% in a textile-like network structure leads to high-performance electrode properties. Their gravimetric capacity is 2330 mAh g-1 at C/20 for all thicknesses produced, reaching areal capacities above 9.3 mAh cm-2 at C/20 and 3.4 mAh cm-2 at 1C (with 3.4 mg cm-2). Analysis of rating data gives a high transport coefficient (6.6x10-12 m2 s-1) due to a high out-of-plane electrical conductivity (0.6 S m-1) and short solid-state diffusion length. Si remains a percolated network of elongated elements after extended cycling, preserving electrical conductivity and leading to a capacity retention of 80% after 100 cycles at C/5 and ~60% after 500 cycles at C/2. When integrated with NMC111 cathode, a full cell gravimetric energy density of 480 Wh kg-1 is demonstrated. △ Less

Submitted 23 June, 2022; originally announced June 2022.

Pore structure and electrochemical properties of CNT-based electrodes studied by in situ small/wide angle X-ray scattering

Authors: Cleis Santos, Evgeny Senokos, Juan Carlos Fernández-Toribio, Álvaro Ridruejo, Rebeca Marcilla, Juan José Vilatela

Abstract: Macroscopic ensembles of nanocarbons, such as fibres of carbon nanotubes (CNT), are characterised by a complex hierarchical structure combining coherent crystalline regions with a large porosity arising from imperfect packing of the large rigid building blocks. Such structure is at the centre of a wide range of charge storage and transfer processes when CNT fibres are used as electrodes and/or cur… ▽ More Macroscopic ensembles of nanocarbons, such as fibres of carbon nanotubes (CNT), are characterised by a complex hierarchical structure combining coherent crystalline regions with a large porosity arising from imperfect packing of the large rigid building blocks. Such structure is at the centre of a wide range of charge storage and transfer processes when CNT fibres are used as electrodes and/or current collectors. This work introduces a method based on wide and small-angle X-ray scattering (WAXS/SAXS) to obtain structural descriptors of CNT fibres and which enables in situ characterisation during electrochemical processes. It enables accurate determination of parameters such as specific surface area, average pore size and average bundle size from SAXS data after correction for scattering from density fluctuations arising from imperfect packing of graphitic planes. In situ and ex situ WAXS/SAXS measurements during electrochemical swelling of CNT fibre electrodes in ionic liquid provide continuous monitoring of the increase in effective surface area caused by electrostatic separation of CNT bundles in remarkable agreement with capacitance changes measured independently. Relative contributions from quantum and Helmholtz capacitance to total capacitance remaining fairly constant. The WAXS/SAXS analysis is demonstrated for fibres of either multi- and single-walled CNTs, and is expected to be generally applicable to operando studies on nanocarbon-based electrodes used in batteries, actuators and other applications △ Less

Submitted 27 July, 2021; originally announced July 2021.

Origin of the electrocatalytic activity in carbon nanotube fiber counter-electrodes for solar-energy conversion

Authors: Alba Martínez-Muíño, Moumita Rana, Juan J. Vilatela, Rubén D. Costa

Abstract: However, their electrocatalytic activity is still poorly understood. This work deciphers the origin of the catalytic activity of counter-electrodes (CEs)/current collectors made of self-standing carbon nanotubes fibers (CNTfs) using Co$^(+2)$/Co$^(+3)$ redox couple electrolytes. This is based on comprehensive electrochemical and spectroscopic characterizations of fresh and used electrodes applied… ▽ More However, their electrocatalytic activity is still poorly understood. This work deciphers the origin of the catalytic activity of counter-electrodes (CEs)/current collectors made of self-standing carbon nanotubes fibers (CNTfs) using Co$^(+2)$/Co$^(+3)$ redox couple electrolytes. This is based on comprehensive electrochemical and spectroscopic characterizations of fresh and used electrodes applied to symmetric electrochemical cells using platinum-based CEs as a reference. As the most relevant findings, two straight relationships were established: i) the limiting current and stability increase rapidly with surface concentration of oxygen-containing functional groups, and ii) the catalytic potential is inversily related to the amount of residual metallic Fe catalyst nanoparticles interspersed in the CNTf network. Finally, the fine tune of the metallic nanoparticle content and the degree of functionalization enabled fabrication of efficient and stable dye-sensitized solar cells with cobalt electrolytes and CNTf-CE outperforming those with reference Pt-CEs. △ Less

Submitted 27 July, 2021; originally announced July 2021.

Composite fabrics of conformal MoS2 grown on CNT fibers: tough battery anodes without metals or binders

Authors: Moumita Rana, Nicola Boaretto, Anastasiia Mikhalchan, Maria Vila Santos, Rebeca Marcilla, Juan Jose Vilatela

Abstract: In the quest to increase battery performance, nanostructuring battery electrodes gives access to architectures with electrical conductivity and solid-state diffusion regimes not accessible with traditional electrodes based on aggregated spherical microparticles, while often also contributing to the cyclability of otherwise unstable active materials. This work describes electrodes where active mate… ▽ More In the quest to increase battery performance, nanostructuring battery electrodes gives access to architectures with electrical conductivity and solid-state diffusion regimes not accessible with traditional electrodes based on aggregated spherical microparticles, while often also contributing to the cyclability of otherwise unstable active materials. This work describes electrodes where active material and current collector are formed as a single nanostructured composite network, consisting of macroscopic fabrics of carbon nanotube fibers covered with conformal MoS2 grown preferentially aligned over the graphitic layers, without metallic current collector or any conductive or polymeric additives. The composite fabric of CNTF/MoS2 retain high toughness and show out-of-plane electrical conductivity as high as 1.2 S/m, above the threshold to avoid electrical transport-limited performance of electrodes (1 S/m), and above control nanocomposite LIB electrodes (0.1 S/m) produced from dispersed nanocarbons. Cycled against Li, they show specific capacity as high as 0.7 Ah/g along with appreciable rate capability and cycling stability in low (108% capacity retention after 50 cycles at 0.1 A/g) as well as high current density (89 % capacity retention after 250 cycles at 1 A/g). The composite fabrics are flexible, with high tensile toughness up to 0.7 J/g, over two orders of magnitude higher than conventional electrodes or regular MoS2 material, and full-electrode capacity above state of the art at different current densities. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Comments: 31 pages, 6 figures

Journal ref: ACS Applied Energy Materials, 2021, 4, 6, 5668

Low-energy consumption, free-form capacitive deionisation through nanostructured networks

Authors: Cleis Santos, Inés V. Rodríguez, Julio J. Lado, María Vila, Enrique García-Quismondo, Marc A. Anderson, Jesús Palma, Juan J. Vilatela

Abstract: Capacitive Deionization (CDI) is a non-energy intensive water treatment technology. To harness the enormous potential of CDI requires improving performance, while offering industrially feasible solutions. Following this idea, the replacement of costly metallic components has been proposed as a mean of limiting corrosion problems. This work explores the use of nanostructured hybrid networks to enab… ▽ More Capacitive Deionization (CDI) is a non-energy intensive water treatment technology. To harness the enormous potential of CDI requires improving performance, while offering industrially feasible solutions. Following this idea, the replacement of costly metallic components has been proposed as a mean of limiting corrosion problems. This work explores the use of nanostructured hybrid networks to enable free-form and metal-free CDI devices. The strategy consists of producing interpenetrated networks of highly conductive flexible carbon nanotube (CNT) fibre fabrics and nanostructured metal oxides, γAl2O3 and TiO2, through ultrasound-assisted nanoparticle infiltration and sintering. In the resulting hybrids, a uniform distribution of porous metal oxide is firmly attached to the nanocarbon network while the flexibility, high conductivity and low-dimensional properties of the CNTs are preserved. These electrodes present a high porosity ($105 - 118 m^{2} g^{1}$), notably low electrical ($< 0,1 k Ωcm^{2}$) and low charge transfer resistance (4 Ω), thus enabling the infiltration of aqueous electrolytes and serving as current collector. In this work we built a large asymmetrical cylindrical CDI device solely made of these electrodes and conventional plastics. The cell provides, high average salt adsorption rates of $1.16 mg /g_{AM} min$ ($0.23 mg/g_{CDIunit} min$, low energy consumption ($0.18 Wh/g_{salt}$) and stable electrochemical performance above 50 cycles for brackish water desalination. △ Less

Submitted 19 July, 2021; originally announced July 2021.

Controlled Nucleation and Growth of Carbon Nitride Films on CNT Fiber Fabric for Photoelectrochemical Applications

Authors: Neeta Karjule, Moumita Rana, Menny Shalom, Jesús Barrio, Juan Jos'{e} Vilatela

Abstract: The controlled growth of carbon nitride (CN) films with tailored electronic properties and surface area is quite challenging due to the solid-state reaction and the lack of efficient interaction between C-N monomers and substrates. Herein, controlled growth of CN films over robust carbon nanotubes (CNT) fiber fabric is reported, which is obtained by either direct calcination of melamine on their s… ▽ More The controlled growth of carbon nitride (CN) films with tailored electronic properties and surface area is quite challenging due to the solid-state reaction and the lack of efficient interaction between C-N monomers and substrates. Herein, controlled growth of CN films over robust carbon nanotubes (CNT) fiber fabric is reported, which is obtained by either direct calcination of melamine on their surface, that yields a bulk material, or by its chemical vapor deposition resulting in hybrid films. These materials are effective electrodes consisting of high surface-area CN containing CNT fiber fabrics acting as a scaffold and a highly conducting built-in current collector. The results confirm that CNTs act as nucleation centers for the formation of CN films, forming close contact at the CN/CNT interphase, and resulting in efficient charge transfer upon illumination and enhanced electrochemical surface area. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Photoelectrocatalytic detection of NADH on n-type silicon semiconductors facilitated by carbon nanotube fibers

Authors: Melisa del Barrio, Moumita Rana, Juan José Vilatela, Encarnación Lorenzo, Antonio L. De Lacey, Marcos Pita

Abstract: NADH is a key biomolecule involved in many biocatalytic processes as cofactor and its quantification can be correlated to specific enzymatic activity. Many efforts have been taken to obtain clean electrochemical signals related to NADH presence and lower its redox overpotential to avoid interferences. Suppression of background and secondary signals can be achieved by including a switchable electro… ▽ More NADH is a key biomolecule involved in many biocatalytic processes as cofactor and its quantification can be correlated to specific enzymatic activity. Many efforts have been taken to obtain clean electrochemical signals related to NADH presence and lower its redox overpotential to avoid interferences. Suppression of background and secondary signals can be achieved by including a switchable electroactive surface, for instance, by using semiconductors able to harvest light energy and drive the excited electrons only when irradiated. Here we present the combination of a n-type Si semiconductor with fibers made of carbon nanotubes as electroactive surface for NADH quantification at low potentials only upon irradiation. The resulting photoelectrode responded linearly to NADH concentrations from 50 μ M to 1.6 mM with high sensitivity (54 $μ$ A cm$^{-2}$ mM${-1}$). This system may serve as a biosensing platform for detection and quantification of dehydrogenases activity. △ Less

Submitted 16 July, 2021; originally announced July 2021.

Identification of Collapsed Carbon Nanotubes in High-Strength Fibres Spun from Compositionally Polydisperse Aerogels

Authors: Maria Vila, Seungki Hong, Seunggyu Park, Anastasiia Mikhalchan, Bon-Cheol Ku, Jun Yeon Hwang, Juan J. Vilatela

Abstract: Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer by shear makes collapsed CNTs ideal building blocks in macroscopic fibers of CNTs with high-performance longitudinal properties, particularly high tensile prope… ▽ More Carbon Nanotubes (CNTs) of sufficiently large diameter and a few layers self-collapse into flat ribbons at atmospheric pressure, forming bundles of stacked CNTs that maximize packing and thus CNT interaction. Their improved stress transfer by shear makes collapsed CNTs ideal building blocks in macroscopic fibers of CNTs with high-performance longitudinal properties, particularly high tensile properties as reinforcing fibres. This work introduces cross-sectional transmission electron microscopy of FIB-milled samples as a way to univocally identify collapsed CNTs and to determine the full population of different CNTs in macroscopic fibers produced by spinning from floating catalyst chemical vapour deposition. We show that close proximity in bundles is a major driver for collapse and that CNT stoutness (number of layers/diameter), which dominates the collapse onset, is controlled by the growth promotor. Despite differences in decomposition route, different C precursors lead to similar distributions of the ratio layers/diameter. The synthesis conditions in this study give a maximum fraction of collapsed CNTs of 70$\%$ when using selenium as promotor, corresponding to an average of $0.25 layer/nm$. △ Less

Submitted 14 July, 2021; originally announced July 2021.

Simultaneous improvements in conversion and properties of molecularly controlled CNT fibres

Authors: Anastasiia Mikhalchan, María Vila, Luis Arévalo, Juan J. Vilatela

Abstract: Fibres of ultralong and aligned carbon nanotubes (CNT) have axial properties above reference engineering materials, proving to be exceptional materials for application in structural composites, energy storage and other devices. For CNT fibres produced by direct spinning from floating catalyst chemical vapor deposition (FCCVD), a scaled-up method, the challenge is to simultaneously achieve high pro… ▽ More Fibres of ultralong and aligned carbon nanotubes (CNT) have axial properties above reference engineering materials, proving to be exceptional materials for application in structural composites, energy storage and other devices. For CNT fibres produced by direct spinning from floating catalyst chemical vapor deposition (FCCVD), a scaled-up method, the challenge is to simultaneously achieve high process conversion and high-performance properties. This work presents a parametric study of the CNT fibre spinning process by establishing the relation between synthesis conditions, molecular composition (i.e. CNT type), fibre mechanical and electrical properties, and conversion. It demonstrates tensile properties (strength 2.1 N/tex, modulus 107 N/tex) above some carbon fibres, combined with carbon conversion about 5%, significantly above literature on similar materials. The combined improvement in conversion and properties is obtained by conducing the reaction at high temperature (1300 °C), using toluene as a carbon source, and through adjustment of the promotor to carbon ratio (S/C) to favor formation of few-layer, collapsed CNTs that maximize packing at relatively high conversions. Lower S/C ratios produce low-defect single-wall CNT, but weaker fibres. An increase in electrical conductivity to 3 x 10^5 S/m is also observed, with the data suggesting a correlation with longitudinal modulus. △ Less

Submitted 6 May, 2021; originally announced May 2021.

Comments: 19 pages, 8 figures, 1 table

Journal ref: Carbon 179 (2021) 417-424

Transparent and flexible high-power supercapacitor based on carbon nanotube fibre aerogels

Authors: Evgeny Senokos, Moumita Rana, Maria Vila, Julio Fernández-Cestau, Rubén D. Costa, Rebeca Marcilla, Juan Jose Vilatela

Abstract: In this work, we report on the fabrication of continuous transparent and flexible supercapacitors by depositing a CNT network onto a polymer electrolyte membrane directly from an aerogel of ultra-long CNTs produced floating in the gas phase. The supercapacitors combine record power density of $1370 kW kg^{-1}$ at high transmittance ($ca. 70%$), high electrochemical stability during extended cyclin… ▽ More In this work, we report on the fabrication of continuous transparent and flexible supercapacitors by depositing a CNT network onto a polymer electrolyte membrane directly from an aerogel of ultra-long CNTs produced floating in the gas phase. The supercapacitors combine record power density of $1370 kW kg^{-1}$ at high transmittance ($ca. 70%$), high electrochemical stability during extended cycling ($>94%$ capacitance retention over $20 000 cycles$) as well as against repeated $180°$ flexural deformation. They represent a significant enhancement of 1-3 orders of magnitude compared to the prior-art transparent supercapacitors based on graphene, CNTs, and rGO. These features mainly arise from the exceptionally long length of the CNTs, which makes the material behave as a bulk conductor instead of an aspect ratio-limited percolating network, even for electrodes with $>90%$ transparency. The electrical and capacitive figures-of-merit for the transparent conductor are $FoMe = 2.7$, and $FoMc = 0.46 F S^{-1} cm^{-2}$ respectively △ Less

Submitted 28 January, 2021; originally announced January 2021.

Macroscopic yarns of FeCl$_{3}$-intercalated collapsed carbon nano-tubes with high do** and stability

Authors: Cristina Madrona, María Vila, Freddy E. Oropeza, Víctor A. de la Peña ÓShea, Juan J. Vilatela

Abstract: Macroscopic arrays of highly crystalline nanocarbons offer the possibility of modifying the electronic structure of their low dimensional constituents, for example through do**, and studying the resulting collective bulk behaviour. Insertion of electron donors or acceptors between graphitic layers is an attractive method to reversibly increase charge carrier concentra-tion without disruption of… ▽ More Macroscopic arrays of highly crystalline nanocarbons offer the possibility of modifying the electronic structure of their low dimensional constituents, for example through do**, and studying the resulting collective bulk behaviour. Insertion of electron donors or acceptors between graphitic layers is an attractive method to reversibly increase charge carrier concentra-tion without disruption of the sp$2$-conjugated system. This work demonstrates FeCl$_{3}$ intercalation into fibres made up of collapsed (flattened) carbon nanotubes. The bundles of collapsed CNTs, similar to crystallites of graphitic nanoribbons, host elongated layered FeCl$_{3}$ crystals of hundreds of $nm$ long, much longer than previous reports on graphitic materials and directly observable by transmission electron microscopy and X-ray diffraction. Intercalated CNT fibres remain stable after months of exposure to ambient conditions, partly due to the spontaneous formation of passivating monolayers of FeClO at the crystal edge, preventing both desorption of intercalant and further hydrolysis. Raman spectroscopy shows substantial electron transfer from the CNTs to FeCl$_{3}$, a well-known acceptor, as observed by G band upshifts as large as $25 cm^{-1}$. After resolving Raman features for the inner and outer layers of the collapsed CNTs, strain and dynamic effect contributions of charge transfer to the Raman upshift could be decoupled, giving a Fermi level downshift of $- 0.72 eV$ and a large average free carrier concentration of $5.3X10^{13}$ $cm^{-2}$ ($0.014$ electrons per carbon atom) in the intercalated system. Four-probe resistivity measurements show an increase in conductivity by a factor of six upon intercalation △ Less

Submitted 28 January, 2021; originally announced January 2021.

Interfacial studies in CNT fibre/TiO$_{2}$ photoelectrodes for efficient H$_{2}$ production

Authors: Alicia Moya, Mariam Barawi, Belén Alemán, Patrick Zeller, Matteo Amati, Alfonso Monreal-Bernal, Luca Gregoratti, Víctor A. de la Peña O'Shea, Juan J. Vilatela

Abstract: An attractive class of materials for photo(electro)chemical reactions are hybrids based on semiconducting metal oxides and nanocarbons (e.g. carbon nanotubes (CNT), graphene), where the nanocarbon acts as a highly-stable conductive scaffold onto which the nanostructured inorganic phase can be immobilised; an architecture that maximises surface area and minimises charge transport/transfer resistanc… ▽ More An attractive class of materials for photo(electro)chemical reactions are hybrids based on semiconducting metal oxides and nanocarbons (e.g. carbon nanotubes (CNT), graphene), where the nanocarbon acts as a highly-stable conductive scaffold onto which the nanostructured inorganic phase can be immobilised; an architecture that maximises surface area and minimises charge transport/transfer resistance. TiO$_{2}$/CNT photoanodes produced by atomic layer deposition on CNT fabrics are shown to be efficient for H$_{2}$ production ($0.07 μmol/min$ $H_{2}$ at $0.2V$ $vs Ag/AgCl$), nearly doubling the performance of TiO$_{2}$ deposited on planar substrates, with $100 \%$ Faradaic efficiency. The results are rationalised based on electrochemical impedance spectroscopy measurements showing a large reduction in photoelectron transport resistance compared to control samples and a higher surface area. The low TiO$_{2}$/CNT interfacial charge transfer resistance ($10 Ω$) is consistent with the presence of an interfacial Ti-O-C bond and corresponding electronic hybridisation determined by spatially-resolved Scanning Photoelectron Microscopy (SPEM) using synchrotron radiation. △ Less

Submitted 2 December, 2020; originally announced December 2020.

Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils

Authors: Yunfu Ou, Carlos González, Juan José Vilatela

Abstract: The introduction of nanostructured interlayers is one of the most promising strategies for interlaminar reinforcement in structural composites. In this work, we study the failure mechanism and interlayer microstructure of aerospace-grade structural composites reinforced with thin veils of carbon nanotube produced using an industrialised spinning process. Samples of unidirectional carbon fibre/epox… ▽ More The introduction of nanostructured interlayers is one of the most promising strategies for interlaminar reinforcement in structural composites. In this work, we study the failure mechanism and interlayer microstructure of aerospace-grade structural composites reinforced with thin veils of carbon nanotube produced using an industrialised spinning process. Samples of unidirectional carbon fibre/epoxy matrix composites interleaved with different composition CNT veils were prepared using hot press method and tested for interlaminar fracture toughness (IFT), measured in Mode-I (opening) and Mode-II (in-plane shear), and for interlaminar shear strength (ILSS), evaluated by the short beam shear (SBS) test. The crack propagation mode could be directly determined through fractography analysis by electron microscopy and resin/CNT spatial discrimination by Raman spectroscopy, showing a clear correlation between interlaminar reinforcement and the balance between cohesive/adhesive failure mode at the interlayer region. Composites with full resin infiltration of the CNT veils give a large increase of Mode II IFT (88%) to 1500 J/m2 and a slight enhancement of apparent interlaminar shear strength (6.5%), but a decrease of Mode I IFT (-21%). The results help establish the role of interlayer infiltration, interlaminar crossings and formation of a carbon fibre bridgings, for interlaminar reinforcement with interleaves. △ Less

Submitted 30 November, 2020; originally announced December 2020.

Comments: 27 pages, 10 figures, 1 table

Journal ref: Composites Part B: Engineering , 201: 108372, 2020

Tough sheets of nanowires produced floating in the gas phase

Authors: Richard S. Schäufele, Miguel Vazquez-Pufleau, Juan J. Vilatela

Abstract: Assembling nanostructured building blocks into network materials unlocks macroscopic properties inaccessible with monolithic solids, notably toughness and tolerance to electrochemical alloying. A method is reported for large-scale, continuous synthesis of silicon nanowires (SiNWs) suspended in the gas phase and their direct assembly into macroscopic sheets. Performing gas-phase growth of SiNWs thr… ▽ More Assembling nanostructured building blocks into network materials unlocks macroscopic properties inaccessible with monolithic solids, notably toughness and tolerance to electrochemical alloying. A method is reported for large-scale, continuous synthesis of silicon nanowires (SiNWs) suspended in the gas phase and their direct assembly into macroscopic sheets. Performing gas-phase growth of SiNWs through floating catalyst chemical vapor deposition using an aerosol of gold nanoparticles eliminates the need for substrates, increasing the growth rate by a factor of 500, reaching 1.4 $μ$m s$^{-1}$ and leading to very long SiNWs. The combined high aspect ratio ($>$210) and large concentration of SiNWs in the gas-phase (1.5 x 107 cm$^{-3}$) enable the formation of macroscopic solids solely composed of percolated SiNWs, such as free-standing sheets and continuous metre-long SiNW tapes. Sheet samples of small diameter SiNWs ($<$25 nm) combine extraordinary flexibility in bending, tensile ductility around 3%, and over 50-fold higher toughness than Si-based anodes (fracture energy 0.18 $\pm$ 0.1 J g$^{-1}$). This synthesis and assembly process should be applicable to virtually any one-dimensional inorganic nanomaterial producible by thermochemical methods. △ Less

Submitted 30 November, 2020; originally announced November 2020.

Comments: 12 pages, 4 figure, 1 table

Journal ref: Mater. Horiz., 2020, 7, 2978-2984

Carbon nanotube synthesis and spinning as macroscopic fibers assisted by the ceramic reactor tube

Authors: X. Rodiles, V. Reguero, M. Vila, B. Alemán, L. Arévalo, F. Fresno, V. A. de la Peña O Shea, J. J. Vilatela

Abstract: Macroscopic fibers of carbon nanotubes (CNT) have emerged as an ideal architecture to exploit the exceptional properties of CNT building blocks in applications ranging from energy storage to reinforcement in structural composites. Controlled synthesis and scalability are amongst the most pressing challenges to further materialize the potential of CNT fibers. This workshows that under floating cata… ▽ More Macroscopic fibers of carbon nanotubes (CNT) have emerged as an ideal architecture to exploit the exceptional properties of CNT building blocks in applications ranging from energy storage to reinforcement in structural composites. Controlled synthesis and scalability are amongst the most pressing challenges to further materialize the potential of CNT fibers. This workshows that under floating catalyst chemical vapor conditions in the direct spinning method, used both in research and industry,the ceramic reactor tube plays an unsuspected active role in CNT growth, leading for example to doubling of reaction yield when mullite (Al4+2xSi2-2xO10-x(x = 0.4)) is used instead of alumina (Al2O3), but without affecting CNT morphology in terms of number of layers, purity or degree of graphitization. This behaviour has been confirmed for different carbon sources andwhen growing either predominantly single-walled or multi-walled CNTs by adjusting promotor concentration. Analysis of large Si-based impurities occasionally found in CNT fiber fabric samples, attributed to reactor tube fragments that end up trapped inthe porous fibers, indicate that the role of the reactor tube is in catalyzing the thermal decomposition of hydrocarbons, which subsequently react with floating Fe catalyst nanoparticles and produce extrusion of the CNTs and formation of an aerogel. Reactor gas analysis confirms that extensive thermal decomposition of the carbon source occurs in the absence of Fe catalystparticles, and that the concentration of different carbon species (e.g. carbon dioxide and ethylene) is sensitive to the reactor tube type. These finding open new avenues for controlled synthesis of CNT fibers by decoupling precursor decomposition from CNT extrusion at the catalyst particle. △ Less

Submitted 19 November, 2020; originally announced November 2020.

Comments: 12 pages, Figure 6

Journal ref: Scientific Reports, 2019

Damage-tolerant, laminated structural supercapacitor composites enabled by integration of carbon nanotube fibres

Authors: Moumita Rana, Yunfu Ou, Chenchen Meng, Federico Sket, Carlos González, Juan J. Vilatela

Abstract: A natural embodiment for multifunctional materials combining energy-storing capabilities and structural mechanical properties are layered structures, similar to both laminate structural composites and electrochemical energy storage devices. A structural composite with integrated electric double layer capacitive storage is produced by resin infusion of a lay up including woven glass fabric used as… ▽ More A natural embodiment for multifunctional materials combining energy-storing capabilities and structural mechanical properties are layered structures, similar to both laminate structural composites and electrochemical energy storage devices. A structural composite with integrated electric double layer capacitive storage is produced by resin infusion of a lay up including woven glass fabric used as mechanical reinforcement, carbon nanotube non-woven fabrics as electrodes/current collectors and a polymer electrolyte. The energy-storing layer is patterned with holes, which after integration form resin plugs for mechanical interconnection between layers, similar to rivets. Finite element modelling is used to optimise rivet shape and areal density on interlaminar shear properties. Galvanostatic charge discharge tests during three point bending show no degradation of properties after large deflections or repeated load/unload cycling at 3.5 V.This mechanical tolerance is a consequence of the elimination of metallic current collectors and the effective integration of multifunctional materials, as observed by electron microscopy and X-ray computed tomography. In contrast, control samples with metallic current collectors, analogous to embedded devices, rapidly degrade upon repeated bending. △ Less

Submitted 12 August, 2020; originally announced August 2020.

Comments: 27 pages, 20 figures

Journal ref: Multifunctional Materials 2020, 3 (1), 015001

Revealing the Mechanism of Electrochemical Lithiation of Carbon Nanotube Fibers

Authors: Nicola Boaretto, Moumita Rana, Rebeca Marcilla, Juan José Vilatela

Abstract: Fabrics of continuous fibers of carbon nanotubes (CNTFs) are attractive materials for multifunctional energy storage devices, either as current collector, or as active material. Despite a similar chemical composition, lithiation/delithiation in CNTFs is substantially different from traditional graphite electrodes. In CNTFs this process is dominated by surface processes, insertion in the bundles in… ▽ More Fabrics of continuous fibers of carbon nanotubes (CNTFs) are attractive materials for multifunctional energy storage devices, either as current collector, or as active material. Despite a similar chemical composition, lithiation/delithiation in CNTFs is substantially different from traditional graphite electrodes. In CNTFs this process is dominated by surface processes, insertion in the bundles interstices, electrochemical do** and often-overlooked partial degradation of the sp2 lattice upon cycling. Through extensive electrochemical analysis, together with in situ Raman spectroscopy measurements, we analyzed the complex lithiation behavior of highly crystalline fibers of CNTs. CNTF can store lithium reversibly with high specific capacity and rate capability, thanks to a large capacitive contribution. Upon lithiation, they undergo electrochemical do**, with longitudinal conductivity increasing by as much as 100 %, concomitant with large downshifts in Raman spectra. However, CNTF are also affected by high first-cycle irreversible capacity, voltage hysteresis and amorphization upon cycling. Electrochemical analysis confirms that SEI formation is responsible for the first-cycle irreversible capacity. Voltage hysteresis is attributed primarily to the trap** of lithium ions in the interstices between stacked nanotubes. Another dominant feature is pre-existing defects, which promote capacitive storage but lead to progressive amorphization of the CNTFs. Indeed, it is evidenced that undesired amorphization is hindered in ultra-pure CNTF without pre-existing defects. △ Less

Submitted 20 August, 2020; v1 submitted 12 August, 2020; originally announced August 2020.

Comments: 27 pages, 9 figures

Journal ref: ACS Appl. Energy Mater. 2020

Controlled electrochemical functionalization of CNT fibers: structure-chemistry relations and application in current collector-free all-solid supercapacitors

Authors: Evgeny Senokosa, Moumita Ranaa, Cleis Santosa, Rebeca Marcilla, Juan J. Vilatela

Abstract: Chemical functionalization of nanocarbons is an important strategy to produce electrochemical systems with higher energy/power density by generating surface functional groups with additional faradaic contribution, by increasing their surface area and correspondent capacitive contribution and by improving compatibility with aqueous electrolytes and other active materials, such as pseudocapacitive m… ▽ More Chemical functionalization of nanocarbons is an important strategy to produce electrochemical systems with higher energy/power density by generating surface functional groups with additional faradaic contribution, by increasing their surface area and correspondent capacitive contribution and by improving compatibility with aqueous electrolytes and other active materials, such as pseudocapacitive metal-oxides. Here we present an electrochemical method to simultaneously swell and functionalize large electrodes consisting of fabrics of macroscopic fibers of carbon nanotubes that renders the material hydrophilic and produces a substantial increase of specific capacitance and energy density in aqueous electrolytes. Through in-depth characterization of the carbon nanotube fibres (CNTF) by Raman spectroscopy, transmission electron microscopy, X-ray photoelectrocn spectroscopy (XPS) and small-angle X-ray scattering (SAXS) we identify various contributions to such improvements, including surface oxidation, tubular unzip**, debundling and inter-bundle swelling. Changes in hydrophilicity of functionalized CNTF are determined by analyzing the dynamics of spreading of polar and nonpolar liquids in the electrode. The extracted contact angles and polar and dispersive surface energy components for different treatment conditions are in agreement with changes in dipole-moment obtained by XPS. Finally, functionalized CNTF electrodes were employed in current collector-free solid flexible supercapacitors, which show enhanced electrochemical properties compared to as-produced hydrophobic ones. △ Less

Submitted 12 August, 2020; originally announced August 2020.

Comments: 23 pages, 9 figures

Journal ref: Carbon 2019, 142, 599-609

High Rate Hybrid MnO2@CNT Fabric Anode for Li-Ion Batteries: Properties and Lithium Storage Mechanism by In-Situ Synchrotron X-Ray Scattering

Authors: Moumita Rana, Venkata Sai Avvaru, Nicola Boaretto, Víctor A. de la Peña Ò Shea, Rebeca Marcill, Vinodkumar Etacheri, Juan J. Vilatela

Abstract: High-performance anodes for rechargeable Li-ion battery are produced by nanostructuring of the transition metal oxides on a conductive support. Here, we demonstrate a hybrid material of MnO2 directly grown onto fabrics of carbon nanotube fibres, which exhibits notable specific capacity over 1100 and 500 mAh/g at a discharge current density of 25 mA/g and 5 A/g, respectively, with coulombic efficie… ▽ More High-performance anodes for rechargeable Li-ion battery are produced by nanostructuring of the transition metal oxides on a conductive support. Here, we demonstrate a hybrid material of MnO2 directly grown onto fabrics of carbon nanotube fibres, which exhibits notable specific capacity over 1100 and 500 mAh/g at a discharge current density of 25 mA/g and 5 A/g, respectively, with coulombic efficiency of 97.5 %. Combined with 97 % capacity retention after 1500 cycles at a current density of 5 A/g, both capacity and stability are significantly above literature data. Detailed investigations involving electrochemical and in situ synchrotron X-ray scattering study reveal that during galvanostatic cycling, MnO2 undergoes an irreversible phase transition to LiMnO2, which stores lithium through an intercalation process, followed by conversion mechanism and pseudocapacitive processes. This mechanism is further confirmed by Raman spectroscopy and X-ray photoelectron spectroscopy. The fraction of pseudocapacitive charge storage ranges from 27% to 83%, for current densities from 25 mA/g to 5 A/g. Firm attachment of the active material to the built-in current collector makes the electrodes flexible and mechanically robust, and ensures that the low charge transfer resistance and the high electrode surface area remain after irreversible phase transition of the active material and extensive cycling. △ Less

Submitted 12 August, 2020; originally announced August 2020.

Comments: 28 pages,7 figures

Journal ref: Journal of Materials Chemistry A 2019, 7 (46), 26596-26606

Understanding cooperative loading in carbon nanotube fibres through in-situ structural studies during stretching

Authors: J. C. Fernández-Toribio, A. Mikhalchan, C. Santos, A. Ridruejo, J. J. Vilatela

Abstract: Carbon nanotube (CNT) fibres are firmly established as a new high-performance fibre, but their tensile mechanical properties remain a relatively small fraction of those of the constituent CNTs. Clear structure-property relations and accurate mechanical models are pressing requirements to bridge this gap. In this work we analyse the structural evolution and molecular stress transfer in CNT fibres b… ▽ More Carbon nanotube (CNT) fibres are firmly established as a new high-performance fibre, but their tensile mechanical properties remain a relatively small fraction of those of the constituent CNTs. Clear structure-property relations and accurate mechanical models are pressing requirements to bridge this gap. In this work we analyse the structural evolution and molecular stress transfer in CNT fibres by performing in-situ synchrotron wide- and small-angle X-ray scattering and Raman spectroscopy during tensile deformation. The results show that CNT fibres can be accurately described as network of bundles that slide progressively according to the initial orientation distribution function of the material following a Weibull distribution. This model decouples the effects of CNT alignment and degree of cooperative loading, as demonstrated for fibres produced at different draw ratios. It also helps explain the unusually high toughness (fracture energy) of CNT fibres produced by the direct spinning method, a key property for impact resistance in structural materials, for example. △ Less

Submitted 4 August, 2020; v1 submitted 7 May, 2020; originally announced May 2020.

Comments: 23 pages, 6 figures; corrected Acknowledgements, other text and results unchanged

Journal ref: Carbon 156 (2020) 430-437

A Perspective on High-performance CNT fibres for Structural Composites

Authors: A. Mikhalchan, J. J. Vilatela

Abstract: This review summarizes progress on structural composites with carbon nanotube fibres. It starts by analyzing their development towards a macroscopic ensemble of elongated and aligned crystalline domains, alongside the evolution of the structure of traditional high-performance fibres. Literature on tensile properties suggests that there are two emerging grades: highly aligned fibres spun from liqui… ▽ More This review summarizes progress on structural composites with carbon nanotube fibres. It starts by analyzing their development towards a macroscopic ensemble of elongated and aligned crystalline domains, alongside the evolution of the structure of traditional high-performance fibres. Literature on tensile properties suggests that there are two emerging grades: highly aligned fibres spun from liquid crystalline solutions, with high modulus and strength, and spun from aerogels of ultra long-nanotubes, combining high strength and fracture energy. The fabrication of large unidirectional fabrics with similar properties as the fibres is presently a challenge, which CNT alignment remaining a key factor. A promising approach is to produce fabrics directly from aerogel filaments without having to densify and handle individual CNT fibres. Structural composites of CNT fibres have reached high longitudinal properties, however, on relatively small samples. In general, there is need to demonstrate fabrication of large CNT fibre laminate composites using standard fabrication routes and to study longitudinal and transverse mechanical properties in tension and compression. Complementary areas of development are interlaminar reinforcement with CNT fabric interleaves, and multifunctional structural composites with energy storage or harvesting functions. △ Less

Submitted 28 April, 2020; originally announced April 2020.

Comments: 79 pages, 26 figures

Journal ref: Carbon 150 (2019) 191-215

A Route to High-Toughness Battery Electrodes

Authors: N. Boaretto, J. Almenara, A. Mikhalchan, R. Marcilla, J. J. Vilatela

Abstract: There is increasing interest in materials that combine energy-storing functions with augmented mechanical properties, ranging from flexibility in bending to stretchability to structural properties. In the case of lithium-ion batteries, these mechanical functions could enable their integration in emerging technologies such as wearable, free-form electronics and ultimately as structural elements, fo… ▽ More There is increasing interest in materials that combine energy-storing functions with augmented mechanical properties, ranging from flexibility in bending to stretchability to structural properties. In the case of lithium-ion batteries, these mechanical functions could enable their integration in emerging technologies such as wearable, free-form electronics and ultimately as structural elements, for example, in transport applications. This work presents a method to produce flexible LiFePO4 LFP electrodes with an extraordinary combination of electrochemical and mechanical performance. Such electrodes exhibit an exceptionally high specific toughness, combined with superior rate capability and energy density, with respect to reference electrodes with typical metallic current collectors. These properties are a result of the strong adhesion of the active material particles to the high surface area carbon nanotube fiber fabric, used as a lightweight, tough, and highly conducting current collector. This strong adherence minimizes electrical resistance, mitigates interfacial failure, and increases ductility through heterogeneous strain after cohesive failure of the inorganic phase. As a result, these electrodes can withstand large deformations before fracture, and, even after fracture, they retain excellent electrochemical performance, approximately double that of unstretched, Al-supported LFP electrodes with equivalent loading. △ Less

Submitted 28 April, 2020; originally announced April 2020.

Comments: 31 pages, 7 figures

Journal ref: ACS Appl. Energy Mater. 2(8) (2019) 5889-5899

Molecular characterization of macroscopic aerogels of single-walled carbon nanotubes

Authors: Belén Alemán, Juan J. Vilatela

Abstract: Single-walled carbon nanotubes (SWCNT) can be assembled into various macroscopic architectures, most notably continuous fibers and films, produced currently on a kilometer per day scale by floating catalyst chemical vapor depositionand spinning from an aerogel of CNTs. An attractive challenge is to produce continuous fibers with controlled molecular structure with respect to the diameter, chiral a… ▽ More Single-walled carbon nanotubes (SWCNT) can be assembled into various macroscopic architectures, most notably continuous fibers and films, produced currently on a kilometer per day scale by floating catalyst chemical vapor depositionand spinning from an aerogel of CNTs. An attractive challenge is to produce continuous fibers with controlled molecular structure with respect to the diameter, chiral angle and ultimately(n,m)indices of the constituent SWCNT molecules. This work presents an extensive Raman spectroscopy and high resolution transmission electron microscopy study of SWCNT aerogels produced by the direct spinning method. By retaining the open structure of the SWCNT aerogel, we reveal the presence of both semiconducting and metallic SWCNTs and determine a full distribution of families of SWCNT grouped by optical transitions. The resulting distribution matches the chiral angle distribution obtained by electron microscopy and electron diffraction. The effect of SWCNT bundling on the Raman spectra, such as the G line shape due to plasmons activated in the far-infrared and semiconductor quenching, are also discussed. By avoiding full aggregation of the aerogel and applying the methodology introduced, rapid screening of molecular features can be achieved in large samples, making this protocol a useful analysis tool for engineered SWCNT fibers and related systems. △ Less

Submitted 22 August, 2019; originally announced August 2019.

Comments: 7 pages, 7 figures

Journal ref: Carbon, Volume 149, 2019, 512 - 518

Interlaminar toughening in structural carbon fiber/epoxy composites interleaved with carbon nanotube veils

Authors: Yunfu Ou, Carlos González, Juan José Vilatela

Abstract: The susceptibility to delamination is one of the main concerns in fiber reinforced polymer composites (FRPs). This work demonstrates improvements of 60% in Mode-I fracture toughness after integration of thin (~30 micron), continuous veils of carbon nanotubes (CNTs) directly deposited onto carbon fiber fabric as the CNT are drawn from the gas-phase using a semi-industrial process. A combination of… ▽ More The susceptibility to delamination is one of the main concerns in fiber reinforced polymer composites (FRPs). This work demonstrates improvements of 60% in Mode-I fracture toughness after integration of thin (~30 micron), continuous veils of carbon nanotubes (CNTs) directly deposited onto carbon fiber fabric as the CNT are drawn from the gas-phase using a semi-industrial process. A combination of optical imaging, scanning electron microscopy and a Raman spectroscopy provide a new rapid tool to unambiguously determine the crack propagation path by simple visual inspection of fracture surface. The results show that interlaminar crossing between CNT veil/CF interfaces is of paramount importance. The crack front alternatingly propagates above and below the CNT-toughened interlayer, significantly improving the fracture toughness of resultant laminates. This mechanism is strongly influenced by the method used to integrate the veils onto the CF. CNT veils directly deposited onto the fabrics as a low-density layer lead to large improvements in interlaminar properties, whereas compact CNT veils densified by solvent exposure prior to their integration in the lay-up act as defects. △ Less

Submitted 12 July, 2019; v1 submitted 22 May, 2019; originally announced May 2019.

Comments: 29 pages, 8 figures

Tensile properties of carbon nanotube fibres described by the fibrillar crystallite model

Authors: J. C. Fernández-Toribio, B. Alemán, A. Ridruejo, J. J. Vilatela

Abstract: This work presents a model that successfully describes the tensile properties of macroscopic fibres of carbon nanotubes (CNTs). The core idea is to treat such a fibre as a network of CNT bundles, similar to the structure of high-performance polymer fibres, with tensile properties defined by the CNT bundle orientation distribution function (ODF), shear modulus and shear strength. Synchrotron small-… ▽ More This work presents a model that successfully describes the tensile properties of macroscopic fibres of carbon nanotubes (CNTs). The core idea is to treat such a fibre as a network of CNT bundles, similar to the structure of high-performance polymer fibres, with tensile properties defined by the CNT bundle orientation distribution function (ODF), shear modulus and shear strength. Synchrotron small-angle X-ray scattering measurements on individual fibres are used to determine the initial ODF and its evolution during in-situ tensile testing. This enables prediction of tensile modulus, strength and fracture envelope, with remarkable agreement with experimental data for fibres produced in-house with different constituent CNTs and for different draw ratios, as well as with literature data. The parameters extracted from the model include: CNT bundle shear strength, shear modulus and tensile strength. These are in agreement with data for commercial high-performance fibres, although high compared with values for single-crystal graphite and short individual CNTs. The manuscript also discusses the unusually high fracture energy of CNT fibres and exceptionally high figure of merit for ballistic protection. The model predicts that small improvements in orientation would lead to superior ballistic peformance than any synthetic high-peformance fiber, with values of strain wave velocity ($U^{1/3}$) exceeding $1000 m/s$. △ Less

Submitted 27 February, 2019; originally announced February 2019.

Advanced Surface Chemistry Analysis of Carbon Nanotube Fibers by X-ray Photoelectron Spectroscopy

Authors: Belén Alemán, María Vila, Juan J. Vilatela

Abstract: Carbon nanotube fibers are materials with an exceptional combination of properties, including higher toughness than carbon fibers, electrical conductivity above metals, large specific surface area (250 $\frac{m^2}{g}$) and high electrochemical stability. As such, they are a key component in various multifunctional structures combining augmented mechanical properties with efficient interfacial ener… ▽ More Carbon nanotube fibers are materials with an exceptional combination of properties, including higher toughness than carbon fibers, electrical conductivity above metals, large specific surface area (250 $\frac{m^2}{g}$) and high electrochemical stability. As such, they are a key component in various multifunctional structures combining augmented mechanical properties with efficient interfacial energy storage/transfer processes. This work presents a thorough XPS study of CNT fibers subjected to different purification and chemical treatments, including spatially-resolved micro XPS synchrotron measurements. The dominant feature is an inherently high degree of $sp^2$ conjugation, leading to a strong plasmonic band and a semi-metallic valence band lineshape. This high degree of CNT perfection in terms of longitudinal graphitization helps to explain reported bulk properties including the high electrical and thermal conductivity, and accessible quantum capacitance. There is also presence of organic impurities, mostly heavy carbonaceous molecules formed as by-products during fiber synthesis and which are adsorbed on the CNTs. Sulfur, a promoter used in the CNT growth reaction, is found both in these surface impurities and associated with the Fe catalyst. The observation of strongly-adsorbed surface impurities is consistent with the high ductility of CNT fibers, attributed to interfacial lubricity. △ Less

Submitted 19 February, 2019; originally announced February 2019.

Comments: 24 pages, 8 figures

Journal ref: Volume215, Issue19 Special Issue: Electronic and Nanostructured Functional Materials Physica Status Solidi a, Vol 215, Issue 19, 2018

Gas-phase functionalization of macroscopic carbon nanotube fiber fabrics: reaction control, electrochemical properties and use for flexible supercapacitors

Authors: Daniel Iglesias, Evgeny Senokos, Belén Alemán, Laura Cabana, Cristina Navío, Rebeca Marcilla, Maurizio Prato, Juan J. Vilatela, Silvia Marchesan

Abstract: The assembly of aligned carbon nanotubes (CNT) into fibers (CNTF) is a convenient approach to exploit and apply the unique physico-chemical properties of CNTs in many fields. CNT functionalization has been extensively used for their implementation into composites and devices. However, CNTF functionalization is still in its infancy, due to the challenges associated with preservation of CNTF morphol… ▽ More The assembly of aligned carbon nanotubes (CNT) into fibers (CNTF) is a convenient approach to exploit and apply the unique physico-chemical properties of CNTs in many fields. CNT functionalization has been extensively used for their implementation into composites and devices. However, CNTF functionalization is still in its infancy, due to the challenges associated with preservation of CNTF morphology. Here, we report a thorough study of the gas-phase functionalization of CNTF fabrics using ozone that was generated in situ from a UV-source. By contrast with liquid-based oxidation methods, this gas-phase approach preserves CNTF morphology, whilst notably increasing its hydrophilicity. The functionalized material is thoroughly characterized by Raman, XPS, TEM and SEM. Its newly acquired hydrophilicity enables CNTF electrochemical characterization in aqueous media, which was not possible for the pristine material. Through comparison of electrochemical measurements in aqueous electrolyte and ionic liquid we decouple the effects of functionalization on pseudocapacitive reactions and quantum capacitance. The functionalized CNTF fabric is successfully used as active material and current collector in all-solid supercapacitor flexible devices with ionic liquid-based polymer electrolyte. △ Less

Submitted 13 February, 2019; originally announced February 2019.

Journal ref: ACS Applied Materials & Interfaces; 2018, 10 (6), 5760-5770 ;

Large area photoelectrodes based on hybrids of CNT fibres and ALD grown TiO2

Authors: A. Moya, N. Kemnade, M. R. Osorio, A. Cherevan, D. Granados, D. Eder, J. J. Vilatela

Abstract: Hybridisation is a powerful strategy towards the next generation of multifunctional materials for environmental and sustainable energy applications. Here, we report a new inorganic nanocarbon hybrid material prepared with atomically controlled deposition of a monocrystalline TiO2 layer that conformally coats a macroscopic carbon nanotube (CNT) fiber. Through X-ray diffraction, Raman spectroscopy a… ▽ More Hybridisation is a powerful strategy towards the next generation of multifunctional materials for environmental and sustainable energy applications. Here, we report a new inorganic nanocarbon hybrid material prepared with atomically controlled deposition of a monocrystalline TiO2 layer that conformally coats a macroscopic carbon nanotube (CNT) fiber. Through X-ray diffraction, Raman spectroscopy and photoemission spectroscopy we detect the formation of a covalent Ti-O-C bond at the TiO2/CNT interface and a residual strain of approximately 0.7-2 \%, which is tensile in TiO2 and compressive in the CNT. It arises after deposition of the amorphous oxide onto the CNT surface previously functionalized by the oxygen plasma used in ALD. These features are observed in samples of different TiO2 thickness, in the range from 10 to 80 nm. Ultraviolet photoemission spectroscopy on a 20 nm-thick TiO2 coated sample gives a work function of 4.27 eV, between that of TiO2 (4.23 eV) and the CNT fiber (4.41 eV), and the presence of new interband gap states that shift the valence band maximum to 1.05 eV below the Fermi level. Photoelectrochemical measurements demonstrate electron transfer from TiO2 to the CNT fiber network under UV irradiation. Electrochemical impedance spectroscopy measurements reveal a low resistance for charge transfer and transport, as well as a large capacitance. Our results point to the fact that these hybrids, in which each phase has nanometric thickness and the current collector is integrated into the material, are very different from conventional electrodes and can provide a number of superior properties. △ Less

Submitted 11 February, 2019; originally announced February 2019.

Journal ref: Journal of Materials Chemistry A; 2017,5(47), 24695-24706;

Manganese Dioxide Decoration of Macroscopic Carbon Nanotube Fibers: From High-Performance Liquid-Based to All-Solid-State Supercapacitors

Authors: Afshin Pendashteh, Evgeny Senokos, Jesus Palma, Marc Anderson, Juan J. Vilatela, Rebeca Marcilla

Abstract: Supercapacitors capable of providing high voltage, energy and power density but yet light, low volume occupying, flexible and mechanically robust are highly interesting and demanded for portable applications. Herein, freestanding flexible hybrid electrodes based on MnO2 nanoparticles grown on macroscopic carbon nanotube fibers (CNTf-MnO2) were fabricated, without the need of any metallic current c… ▽ More Supercapacitors capable of providing high voltage, energy and power density but yet light, low volume occupying, flexible and mechanically robust are highly interesting and demanded for portable applications. Herein, freestanding flexible hybrid electrodes based on MnO2 nanoparticles grown on macroscopic carbon nanotube fibers (CNTf-MnO2) were fabricated, without the need of any metallic current collector. The CNTf, a support with excellent electrical conductivity, mechanical stability, and appropriate pore structure, was homogeneously decorated with porous akhtenskite ε-MnO2 nanoparticles produced via electrodeposition in an optimized organic-aqueous mixture. Electrochemical properties of these decorated fibers were evaluated in different electrolytes including a neutral aqueous solution and a pure 1-butyl-3-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquid (PYR14TFSI). This comparison helps discriminate the various contributions to the total capacitance: (surface) Faradaic and non-Faradaic processes, improved wetting by aqueous electrolytes. Accordingly, symmetric supercapacitors with PYR14TFSI led to a high specific energy of 36 Whkg_(MnO_2)^(-1) (16 Whkg-1 including the weight of CNTf) and real specific power of 17 kWkg_(MnO_2)^(-1) (7.5 kWkg-1) at 3.0 V with excellent cycling stability. Moreover, flexible all solid-state supercapacitors were fabricated using PYR14TFSI-based polymer electrolyte, exhibiting maximum energy density of 21 Whkg-1 and maximum power density of 8 kWkg-1 normalized by total active material. △ Less

Submitted 11 February, 2019; originally announced February 2019.

Journal ref: Journal of Power Sources; 2017, 372, 64-73;

Fractal carbon nanotube fibers with mesoporous crystalline structure

Authors: H. Yue, V. Reguero, E. Senokos, A. Monreal-Bernal, B. Mas, J. P. Fernández-Blázquez, R. Marcilla, J. J. Vilatela

Abstract: Macroscopic fibres of carbon nanotubes are hierarchical structures combining long building blocks preferentially oriented along the fibre axis and a large porosity arising from the imperfect packing of bundles. Synchrotron small-angle X-ray scattering SAXS measurements show that such structure is a surface fractal with fractal dimension (Ds) of 2.5 for MWCNT fibres and 2.8 for SWCNT fibres. N2 ads… ▽ More Macroscopic fibres of carbon nanotubes are hierarchical structures combining long building blocks preferentially oriented along the fibre axis and a large porosity arising from the imperfect packing of bundles. Synchrotron small-angle X-ray scattering SAXS measurements show that such structure is a surface fractal with fractal dimension (Ds) of 2.5 for MWCNT fibres and 2.8 for SWCNT fibres. N2 adsorption measurements give similar values of 2.54 and 2.50, respectively. The fractal dimension and deviation from Porods law are related to density fluctuations associated with the wide distribution of separations between CNTs. These fluctuations are also evident as diffuse wide-angle X-ray scattering (WAXS) from CNTs at distances above turbostratic separation. The structure of CNT fibres produced at different draw ratios is compared in terms of degree of orientation and characteristic lengths parallel and perpendicular to the fibre. Drawing not only increases alignment but also the fraction of graphitic planes forming coherent domains capable of taking part in stress transfer by shear; thus increasing both tensile modulus and strength. The invariant-normalized intensity of the (002) equatorial reflection thus takes the form of a degree of crystallinity closely related to tensile properties. △ Less

Submitted 11 February, 2019; originally announced February 2019.

Journal ref: Carbon; 2017,122, 47-53;

Large-area, all-solid and flexible electric double layer capacitors based on CNT fiber electrodes and polymer electrolytes

Authors: Evgeny Senokos, Víctor Reguero, Laura Cabana, Jesus Palma, Rebeca Marcilla, Juan Jose Vilatela

Abstract: This work presents a scalable method to produce robust all-solid electric double layer capacitors (EDLCs), compatible with roll-to-roll processes and structural laminate composite fabrication. It consists in sandwiching and pressing an ionic liquid (IL) based polymer electrolyte membrane between two CNT fiber sheet electrodes at room temperature, and laminating with ordinary plastic film. This fab… ▽ More This work presents a scalable method to produce robust all-solid electric double layer capacitors (EDLCs), compatible with roll-to-roll processes and structural laminate composite fabrication. It consists in sandwiching and pressing an ionic liquid (IL) based polymer electrolyte membrane between two CNT fiber sheet electrodes at room temperature, and laminating with ordinary plastic film. This fabrication method is demonstrated by assembling large area devices of up to 100 cm2 with electrodes fabricated in-house, as well as with commercial CNT fiber sheets. Free-standing flexible devices operating at 3.5 V exhibited 28 F g-1 of specific capacitance, 11.4 Wh kg-1 of energy density and 46 kW kg-1 of power density. These values are nearly identical to control samples with pure ionic liquid. The solid EDLC could be repeatedly bent and folded 180° without degradation of their properties, with a reversible 25% increase in energy density in the bent state. Devices produced using CNT fiber electrodes with a higher degree of orientation and therefore better mechanical properties showed similar electrochemical properties combined with composite specific strength and modulus of 39 MPa/SG and 577 MPa/SG for a fiber mass fraction of 11 wt.%, similar to a structural thermoplastic and with higher specific strength than copper. △ Less

Submitted 11 February, 2019; originally announced February 2019.

Journal ref: Advanced Materials Technologies; 2017, 2(7), 1600290

Do** of Self-Standing CNT Fibers: Promising Flexible Air-Cathodes for High Energy Density Structural Zn-air batteries

Authors: Afshin Pendashteh, Jesus Palma, Marc Anderson, Juan J. Vilatela, Rebeca Marcilla

Abstract: Finding proper electrocatalysts capable of efficient catalyzing both ORR and OER is of great importance for metal-air batteries. With increasing inclination towards structural and flexible devices, develo** a high-performance self-standing air-cathode is highly demanded and challenging, as most of oxygen catalysts are powder and need to be further processed. Here, we construct highly bifunctiona… ▽ More Finding proper electrocatalysts capable of efficient catalyzing both ORR and OER is of great importance for metal-air batteries. With increasing inclination towards structural and flexible devices, develo** a high-performance self-standing air-cathode is highly demanded and challenging, as most of oxygen catalysts are powder and need to be further processed. Here, we construct highly bifunctional air catalyst from macroscopic CNT fibers (CNTf) through direct CVD spinning followed by hydrothermal method. The electrocatalytic properties of the samples were tuned by altering nitrogen-do** and defect densities readily adjusted at different hydrothermal reaction temperatures. The treated CNTfs showed excellent bifunctional activity (ΔE=Ej=10-E1/2=0.81 V) and demonstrated exceptional performance as carbon-based self-standing air-cathodes in liquid and solid-state rechargeable Zn-air batteries, with high capacity of 698 mAh g-1 and ultrahigh energy density of 838 Wh kg-1. The rechargeable Zn-air batteries exhibit a low discharge-charge overpotential and excellent stability. This work provides novel simply achieved self-standing air electrodes with exceptional performance for structural Zn-air batteries. △ Less

Submitted 31 January, 2019; originally announced January 2019.

Journal ref: ACS Applied Energy Materials, 2018

Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves

Authors: Evgeny Senokos, Yunfu Ou, Juan Jose Torres, Federico Sket, Carlos Gonzalez, Rebeca Marcilla, Juan J. Vilatela

Abstract: This work presents a method to produce structural composites capable of energy storage. They are produced by integrating thin sandwich structures of CNT fiber veils and an ionic liquid-based polymer electrolyte between carbon fiber plies, followed by infusion and curing of an epoxy resin. The resulting structure behaves simultaneously as an electric double-layer capacitor and a structural composit… ▽ More This work presents a method to produce structural composites capable of energy storage. They are produced by integrating thin sandwich structures of CNT fiber veils and an ionic liquid-based polymer electrolyte between carbon fiber plies, followed by infusion and curing of an epoxy resin. The resulting structure behaves simultaneously as an electric double-layer capacitor and a structural composite, with flexural modulus of 60 GPa and flexural strength of 153 MPa, combined with 88 mF/g of specific capacitance and the highest power (30 W/kg) and energy (37.5 mWh/kg) densities reported so far for structural supercapacitors. In-situ electrochemical measurements during 4-point bending show that electrochemical performance is retained up to fracture, with minor changes in equivalent series resistance for interleaves under compressive stress. En route to improving interlaminar properties we produce grid-shaped interleaves that enable mechanical interconnection of plies by the stiff epoxy. Synchrotron 3D X-ray tomography analysis of the resulting hierarchical structure confirms the formation of interlaminar epoxy joints. The manuscript discusses encapsulation role of epoxy, demonstrated by charge-discharge measurements of composites immersed in water, a deleterious agent for ionic liquids. Finally, we show different architectures free of current collector and electrical insulators, in which both CNT fiber and CF act as active electrodes. △ Less

Submitted 1 October, 2018; originally announced October 2018.

Journal ref: Scientific Reports; 2018, 8, 3407;

Structural composites for multifunctional applications: current challenges and future trends

Authors: C. González, J. J. Vilatela, J. M. Molina-Aldareguía, C. S. Lopes, J. LLorca

Abstract: This review paper summarizes the current state-of-art and challenges for the future developments of fiber-reinforced composites for structural applications with multifunctional capabilities. After a brief analysis of the reasons of the successful incorporation of fiber-reinforced composites in many different industrial sectors, the review analyzes three critical factors that will define the future… ▽ More This review paper summarizes the current state-of-art and challenges for the future developments of fiber-reinforced composites for structural applications with multifunctional capabilities. After a brief analysis of the reasons of the successful incorporation of fiber-reinforced composites in many different industrial sectors, the review analyzes three critical factors that will define the future of composites. The first one is the application of novel fiber-deposition and preforming techniques together with innovative liquid moulding strategies, which will be combined by optimization tools based on novel multiscale modelling approaches, so fiber-reinforced composites with optimized properties can be designed and manufactured for each application. In addition, composite applications will be enhanced by the incorporation of multifunctional capabilities. Among them, electrical conductivity, energy storage (structural supercapacitors and batteries) and energy harvesting (piezoelectric and solar energy) seem to be the most promising ones. △ Less

Submitted 10 April, 2017; v1 submitted 29 March, 2017; originally announced March 2017.

Journal ref: Progress in Materials Science, 89, 194-251, 2017

Highly responsive UV-photodetectors based on single electrospun TiO2 nanofibres

Authors: Aday J. Molina-Mendoza, Alicia Moya, Riccardo Frisenda, Simon A. Svatek, Patricia Gant, Sergio Gonzalez-Abad, Elisa Antolin, Nicolás Agraït, Gabino Rubio-Bollinger, David Perez de Lara, Juan J. Vilatela, Andres Castellanos-Gomez

Abstract: In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol-gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the dark give a conductivity above 2*10^-5 S, which increases up to 8*10^-5 S in vacuum. Photocurrent measurements under UV-irradiation show high sensitivity (respo… ▽ More In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol-gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the dark give a conductivity above 2*10^-5 S, which increases up to 8*10^-5 S in vacuum. Photocurrent measurements under UV-irradiation show high sensitivity (responsivity of 90 A/W for 375 nm wavelength) and a response time to illumination of ~ 5 s, which is superior to state-of-the-art TiO2-based UV photodetectors. Both responsivity and response speed are higher in air than in vacuum, due to oxygen adsorbed on the TiO2 surface which traps photoexcited free electrons in the conduction band, thus reducing the recombination processes. The photodetectors are sensitive to light polarization, with an anisotropy ratio of 12%. These results highlight the interesting combination of large surface area and low 1D transport resistance in electrospun TiO2 fibres. The simplicity of the sol-gel/electrospinning synthesis method, combined with a fast response and high responsivity makes them attractive candidates for UV-photodetection in ambient conditions. We anticipate their high (photo) conductance is also relevant for photocatalysis and dye-sensitized solar cells. △ Less

Submitted 3 November, 2016; originally announced November 2016.

Comments: 29 pages, 5 figures in the main text, 9 figures in the Supporting Information. in J. Mater. Chem. C, 2016

Threading Through Macrocycles Enhances the Performance of Carbon Nanotubes as Polymer Fillers

Authors: A. López-Moreno, B. Nieto-Ortega, M. Moffa, A. de Juan, M. Mar Bernal, J. P. Fernández-Blázquez, J. J. Vilatela, D. Pisignano, E. M. Pérez

Abstract: In this work we study the reinforcement of polymers by mechanically interlocked derivatives of single-walled carbon nanotubes (SWNTs). We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked derivatives of SWNTs (MINTs) and the corresponding supramolecular models. Improvements of both Young's m… ▽ More In this work we study the reinforcement of polymers by mechanically interlocked derivatives of single-walled carbon nanotubes (SWNTs). We compare the mechanical properties of fibers made of polymers and of composites with pristine single-walled carbon nanotubes (SWNTs), mechanically interlocked derivatives of SWNTs (MINTs) and the corresponding supramolecular models. Improvements of both Young's modulus and tensile strength of up to 200 % were observed for the polystyrene-MINTs samples with an optimized loading of just 0.01 wt.%, while the supramolecular models with identical chemical composition and loading showed negligible or even detrimental influence. This behavior is found for three different types of SWNTs and two types of macrocycles. Molecular dynamics simulations show that the polymer adopts an elongated conformation parallel to the SWNT when interacting with MINT fillers, irrespective of the macrocycle chemical nature, whereas a more globular structure is taken upon facing with either pristine SWNTs or supramolecular models. The MINT composite architecture thus leads to a more efficient exploitation of the axial properties of the SWNTs and of the polymer chain at the interface, in agreement with experimental results. Our findings demonstrate that the mechanical bond imparts distinctive advantageous properties to SWNT derivatives as polymer fillers. △ Less

Submitted 2 August, 2016; originally announced August 2016.

Comments: 39 pages, 19 figures

Journal ref: ACS Nano, 2016