-
Effect of particle stiffness and surface properties on the nonlinear viscoelasticity of dense microgel suspensions
Authors:
Jacopo Vialetto,
Shivaprakash N. Ramakrishna,
Lucio Isa,
Marco Laurati
Abstract:
Particle surface chemistry and internal softness are two fundamental parameters in governing the mechanical properties of dense colloidal suspensions, dictating structure and flow, therefore of interest from materials fabrication to processing. Here, we modulate softness by tuning the crosslinker content of poly(N-isopropylacrylamide) microgels, and we adjust their surface properties by co-polymer…
▽ More
Particle surface chemistry and internal softness are two fundamental parameters in governing the mechanical properties of dense colloidal suspensions, dictating structure and flow, therefore of interest from materials fabrication to processing. Here, we modulate softness by tuning the crosslinker content of poly(N-isopropylacrylamide) microgels, and we adjust their surface properties by co-polymerization with polyethylene glycol (PEG) chains, controlling adhesion, friction and fuzziness. We investigate the distinct effects of these parameters on the entire mechanical response from restructuring to complete fluidization of jammed samples at varying packing fractions under large-amplitude oscillatory shear experiments, and we complement rheological data with colloidal-probe atomic force microscopy to unravel variations in the particles' surface properties. We find that surface properties play a fundamental role at smaller packings; decreasing adhesion and friction at contact causes the samples to yield and fluidify in a lower deformation range. Instead, increasing softness or fuzziness has a similar effect at ultra-high densities, making suspensions able to better adapt to the applied shear and reach complete fluidization over a larger deformation range. These findings shed new light on the single-particle parameters governing the mechanical response of dense suspensions subjected to deformation, offering synthetic approaches to design materials with tailored mechanical properties.
△ Less
Submitted 5 March, 2024;
originally announced March 2024.
-
Tuning electrostatic interactions of colloidal particles at oil-water interfaces with organic salts
Authors:
Carolina van Baalen,
Jacopo Vialetto,
Lucio Isa
Abstract:
Monolayers of colloidal particles at oil-water interfaces readily crystalize owing to electrostatic repulsion, which is often mediated through the oil. However, little attempts exist to control it using oil-soluble electrolytes. We probe the interactions amongst charged hydrophobic micospheres confined at a water/hexadecane interface and show that repulsion can be continuously tuned over orders of…
▽ More
Monolayers of colloidal particles at oil-water interfaces readily crystalize owing to electrostatic repulsion, which is often mediated through the oil. However, little attempts exist to control it using oil-soluble electrolytes. We probe the interactions amongst charged hydrophobic micospheres confined at a water/hexadecane interface and show that repulsion can be continuously tuned over orders of magnitude upon introducing minor amounts of an organic salt into the oil. Our results show that charged groups at the particle/oil interface are subject to an associative discharging mechanism, analogous to the charge regulation kinetics observed for charged colloids in non-polar solvents.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
The effect of curvature on the diffusion of colloidal bananas
Authors:
Justin-Aurel Ulbrich,
Carla Fernandez-Rico,
Brian Rost,
Jacopo Vialetto,
Lucio Isa,
Jeffrey S. Urbach,
Roel P. A. Dullens
Abstract:
Anisotropic colloidal particles exhibit complex dynamics which play a crucial role in their functionality, transport and phase behaviour. In this work, we investigate the two-dimensional diffusion of smoothly curved colloidal rods -- also known as colloidal bananas -- as a function of their opening angle, α. We measure the translational and rotational diffusion coefficients of the particles with o…
▽ More
Anisotropic colloidal particles exhibit complex dynamics which play a crucial role in their functionality, transport and phase behaviour. In this work, we investigate the two-dimensional diffusion of smoothly curved colloidal rods -- also known as colloidal bananas -- as a function of their opening angle, α. We measure the translational and rotational diffusion coefficients of the particles with opening angles ranging from 0° (straight rods) to nearly 360°(closed rings). In particular, we find that the anisotropic diffusion of the particles varies non-monotonically with their opening angle and that the axis of fastest diffusion switches from the long to the short axis of the particles when α>180°.
We also find that the rotational diffusion coefficient of nearly closed rings is approximately an order of magnitude higher than that of straight rods of the same length. Finally, we show that the experimental results are consistent with Slender Body Theory, indicating that the dynamical behavior of the particles arises primarily from their local drag anisotropy. These results highlight the impact of curvature on the Brownian Motion of elongated colloidal particles, which must be taken into account when seeking to understand the behaviour of curved colloidal particles.
△ Less
Submitted 14 November, 2022;
originally announced November 2022.
-
In-situ imaging of the three-dimensional shape of soft responsive particles at fluid interfaces by atomic force microscopy
Authors:
Jacopo Vialetto,
Shivaprakash N. Ramakrishna,
Lucio Isa
Abstract:
The reconfiguration of soft, deformable particles upon adsorption at the interface between two fluids underpins many aspects of their dynamics and interactions, ultimately controlling the macroscopic properties of particle monolayers of relevance for materials, such as particle-stabilized emulsions and foams, and processes, e. g. particle-based lithography. In spite of its importance, experimental…
▽ More
The reconfiguration of soft, deformable particles upon adsorption at the interface between two fluids underpins many aspects of their dynamics and interactions, ultimately controlling the macroscopic properties of particle monolayers of relevance for materials, such as particle-stabilized emulsions and foams, and processes, e. g. particle-based lithography. In spite of its importance, experimentally determining the three-dimensional shape of soft particles at fluid interfaces with high resolution remains an elusive task. In this work, we take poly(N-isopropylacrylamide) (pNIPAM) microgels as model soft particles and demonstrate that their conformation at the interface between an aqueous and an oil phase can be fully reconstructed by means of in-situ atomic force microscopy (AFM) imaging. We show that imaging the particle topography from both sides of the interface allows one to characterize the in-plane deformation of the particle under the action of interfacial tension and to visualize the occurrence of asymmetric swelling in the two fluids. Additionally, the technique enables investigating different fluid phases and particle architectures, as well as studying in situ the effect of temperature variations on particle conformation. We envisage that these results open up an exciting range of possibilities to provide microscopic insights between the single-particle behavior of soft objects at fluid interfaces and macroscopic material properties of relevance for applications and fundamental studies alike.
△ Less
Submitted 20 April, 2022;
originally announced April 2022.
-
Influence of the interfacial tension on the microstructural and mechanical properties of microgels at fluid interfaces
Authors:
Jacopo Vialetto,
Natalie Nussbaum,
Jotam Bergfreund,
Peter Fischer,
Lucio Isa
Abstract:
Microgels are soft colloidal particles constituted by cross-linked polymer networks with a high potential for applications. In particular, after adsorption at a fluid interface, interfacial tension provides two-dimensional (2D) confinement for microgel monolayers and drives the reconfiguration of the particles, enabling their deployment in foam and emulsion stabilization and in surface patterning…
▽ More
Microgels are soft colloidal particles constituted by cross-linked polymer networks with a high potential for applications. In particular, after adsorption at a fluid interface, interfacial tension provides two-dimensional (2D) confinement for microgel monolayers and drives the reconfiguration of the particles, enabling their deployment in foam and emulsion stabilization and in surface patterning for lithography, sensing and optical materials. However, most studies focus on systems of fluids with a high interfacial tension, e.g. alkanes/ or air/water interfaces, which imparts similar properties to the assembled monolayers. Here, instead, we compare two organic fluid phases, hexane and methyl tert-butyl ether, which have markedly different interfacial tension ($γ$) values with water and thus tune the elasticity and deformation of adsorbed microgels. We rationalize how $γ$ controls the single-particle morphology, which consequently modulates the structural and mechanical response of the monolayers at varying interfacial compression. Specifically, when $γ$ is low, the microgels are less deformed within the interface plane and their polymer networks can rearrange more easily upon lateral compression, leading to softer monolayers. Selecting interfaces with different surface energy offers an additional control to customize the 2D assembly of soft particles, from the fine-tuning of particle size and interparticle spacing to the tailoring of mechanical properties.
△ Less
Submitted 2 September, 2021;
originally announced September 2021.
-
The effect of internal architecture on the assembly of soft particles at fluid interfaces
Authors:
Jacopo Vialetto,
Fabrizio Camerin,
Fabio Grillo,
Lorenzo Rovigatti,
Emanuela Zaccarelli,
Lucio Isa
Abstract:
Monolayers of soft colloidal particles confined at fluid interfaces have been attracting increasing interest for fundamental studies and applications alike. However, establishing the relation between their internal architecture, which is controlled during synthesis, and their structural and mechanical properties upon interfacial confinement, which define the monolayer's properties, remains an elus…
▽ More
Monolayers of soft colloidal particles confined at fluid interfaces have been attracting increasing interest for fundamental studies and applications alike. However, establishing the relation between their internal architecture, which is controlled during synthesis, and their structural and mechanical properties upon interfacial confinement, which define the monolayer's properties, remains an elusive task. Here, we propose a comprehensive study elucidating this relation for a system of microgels with tunable architecture. We synthesize core-shell microgels, whose soft core can be chemically degraded in a controlled fashion, yielding particles ranging from analogues of standard batch-synthesized to completely hollow microgels after total core removal. We characterize the internal structure of these particles, their swelling properties in bulk and their morphologies upon adsorption at an oil-water interface via a combination of numerical simulations and complementary experiments. In particular, we confirm that hollow microgels are mechanically stable in bulk aqueous conditions and that the progressive removal of the core leads to a significant flattening of the microgels, which become disk-like particles, at the interface. At low compression, the mechanical response of the monolayer is dominated by the presence of loosely crosslinked polymers forming a corona surrounding the particle within the interfacial plane, regardless of the presence of a core. By contrast, at high compression, the absence of a core enables the particles to deform in the direction orthogonal to the interface. These findings shed new light on which structural features of soft particles determine their interfacial behaviour, enabling new design strategies for tailored materials.
△ Less
Submitted 27 March, 2021;
originally announced March 2021.