-
Disorder-to-order transition of long fibers contained in evaporating sessile drops
Authors:
S. Sannyamath,
R. Vetter,
H. Bonart,
M. Hartmann,
R. Ganguly,
S. Hardt
Abstract:
A liquid drop containing a long fiber is a complex system whose configuration is determined by an interplay of elastic stresses in the fiber and capillary forces due to the liquid. We study the morphological evolution of fibers that are much longer than the drop diameter in evaporating sessile drops. After insertion, the fibers are either found in an ordered or disordered state, with increasing di…
▽ More
A liquid drop containing a long fiber is a complex system whose configuration is determined by an interplay of elastic stresses in the fiber and capillary forces due to the liquid. We study the morphological evolution of fibers that are much longer than the drop diameter in evaporating sessile drops. After insertion, the fibers are either found in an ordered or disordered state, with increasing disorder for increasing fiber length. Upon evaporation, the order increases, in such a way that the final configuration deposited on the solid surface is either a circle, an ellipse, or 8-shaped. The morphology of the deposit depends on the fiber length and the elastocapillary length, both non-dimensionalized with the characteristic drop size, which we classify in a morphology regime map. The disorder-to-order transition allows depositing ordered fiber structures on solid surfaces even in cases of a strongly disordered state after fiber insertion. Combined with technologies such as inkjet printing, this process could open new avenues to decorate surfaces with filamental structures whose morphology can be controlled by varying the fiber length.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Reply to: Assessing the precision of morphogen gradients in neural tube development
Authors:
Roman Vetter,
Dagmar Iber
Abstract:
In a recent article [Vetter and Iber, Nat. Commun. 13, 1145 (2022)], we demonstrated that single morphogen gradients in the develo** mouse neural tube can carry sufficient positional accuracy to explain the patterning precision of progenitor domain boundaries. Zagorski et al. had previously concluded otherwise [Zagorski et al., Science 356, 1379-1383 (2017)], based on methodological inconsistenc…
▽ More
In a recent article [Vetter and Iber, Nat. Commun. 13, 1145 (2022)], we demonstrated that single morphogen gradients in the develo** mouse neural tube can carry sufficient positional accuracy to explain the patterning precision of progenitor domain boundaries. Zagorski et al. had previously concluded otherwise [Zagorski et al., Science 356, 1379-1383 (2017)], based on methodological inconsistencies that we have revealed. The authors now comment on our work with a Matters Arising letter. We rebut their criticism point by point in the Supplement, and summarize the main aspects here.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
A Geometric Map** from Rectilinear Material Orthotropy to Isotropy: Insights to Plates and Shells
Authors:
Wenqian Sun,
Cody Rasmussen,
Roman Vetter,
Jayson Paulose
Abstract:
Orthotropic shell structures are ubiquitous in biology and engineering, from bacterial cell walls to reinforced domes. We present a rescaling transformation that maps an orthotropic shallow shell to an isotropic one with a different local geometry. The map** is applicable to any shell section for which the material orthotropy directions match the principal curvature directions, assuming a common…
▽ More
Orthotropic shell structures are ubiquitous in biology and engineering, from bacterial cell walls to reinforced domes. We present a rescaling transformation that maps an orthotropic shallow shell to an isotropic one with a different local geometry. The map** is applicable to any shell section for which the material orthotropy directions match the principal curvature directions, assuming a commonly used form for the orthotropic shear modulus. Using the rescaling transformation, we derive exact expressions for the buckling pressure as well as the linear indentation response of orthotropic cylinders and general ellipsoids of revolution, which we verify against numerical simulations. Our analysis disentangles the separate contributions of geometric and material anisotropy to shell rigidity. In particular, we identify the geometric mean of orthotropic elastic constants as the key quantifier of material stiffness, playing a role akin to the Gaussian curvature which captures the geometric stiffness contribution. Besides providing insights into the mechanical response of orthotropic shells, our work rigorously establishes the validity of isotropic approximations to orthotropic shells and also identifies situations in which these approximations might fail.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
PolyHoop: Soft particle and tissue dynamics with topological transitions
Authors:
Roman Vetter,
Steve V. M. Runser,
Dagmar Iber
Abstract:
We present PolyHoop, a lightweight standalone C++ implementation of a mechanical model to simulate the dynamics of soft particles and cellular tissues in two dimensions. With only few geometrical and physical parameters, PolyHoop is capable of simulating a wide range of particulate soft matter systems: from biological cells and tissues to vesicles, bubbles, foams, emulsions, and other amorphous ma…
▽ More
We present PolyHoop, a lightweight standalone C++ implementation of a mechanical model to simulate the dynamics of soft particles and cellular tissues in two dimensions. With only few geometrical and physical parameters, PolyHoop is capable of simulating a wide range of particulate soft matter systems: from biological cells and tissues to vesicles, bubbles, foams, emulsions, and other amorphous materials. The soft particles or cells are represented by continuously remodeling, non-convex, high-resolution polygons that can undergo growth, division, fusion, aggregation, and separation. With PolyHoop, a tissue or foam consisting of a million cells with high spatial resolution can be simulated on conventional laptop computers.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
Bacterial biofilms use chiral branches to escape crowded environments by tracking oxygen gradient
Authors:
Mustafa Basaran,
Tevfik Can Yüce,
Yusuf Ilker Yaman,
Roman Vetter,
Askin Kocabas
Abstract:
Bacterial biofilms collectively develop distinct and ordered structures, including fibers, bundles, and branches. Often, it is unclear how these structural motifs convey specific advantages to bacterial strains under challenging conditions. In oxygen-limited environments, dense bacterial aggregates generally deplete oxygen, which leads to arrest of bacterial growth. However, we observed that biofi…
▽ More
Bacterial biofilms collectively develop distinct and ordered structures, including fibers, bundles, and branches. Often, it is unclear how these structural motifs convey specific advantages to bacterial strains under challenging conditions. In oxygen-limited environments, dense bacterial aggregates generally deplete oxygen, which leads to arrest of bacterial growth. However, we observed that biofilm-forming Bacillus subtilis could use branching patterns to escape from these crowded regions by tracking the oxygen gradient. The process depends on the chain-forming ability of the biofilm. As a result of collective branching triggered by bending and mechanical buckling, bacteria can extend from the oxygen-depleted biofilm core to the oxygen available periphery. Remarkably, these bacterial branches are strongly chiral and curve in a clockwise direction. Our analysis revealed that the surface friction and axial rotation of the twisting cell wall break left-right symmetry on solid surfaces and drive chiral bending of bacterial chains. We further observed that the chirality of individual branches could propagate across a large scale and shape the macroscopic morphology of the colony under a limited spatiotemporal growth profile. Taken together, our results provide new insights into how simple physical interactions lead to bacterial collaboration and promote the survival of biofilm-forming strains in challenging environments.
△ Less
Submitted 15 November, 2022; v1 submitted 20 August, 2022;
originally announced August 2022.
-
Large-scale orientational order in bacterial colonies during inward growth
Authors:
Mustafa Başaran,
Y. Ilker Yaman,
Tevfik Can Yuce,
Roman Vetter,
Askin Kocabas
Abstract:
During colony growth, complex interactions regulate the bacterial orientation, leading to the formation of large-scale ordered structures, including topological defects and microdomains. These structures may benefit bacterial strains, providing invasive advantages during colonization. Active matter dynamics of growing colonies drives the emergence of these ordered structures. However, additional b…
▽ More
During colony growth, complex interactions regulate the bacterial orientation, leading to the formation of large-scale ordered structures, including topological defects and microdomains. These structures may benefit bacterial strains, providing invasive advantages during colonization. Active matter dynamics of growing colonies drives the emergence of these ordered structures. However, additional biomechanical factors also play a significant role during this process. Here we show that the velocity profile of growing colonies creates strong radial orientation during inward growth when crowded populations invade a closed area. During this process, growth geometry sets virtual confinement and dictates the velocity profile. Herein, flow-induced alignment and torque balance on the rod-shaped bacteria significantly differed, resulting in new stable orientational equilibrium in the radial direction. Our analysis revealed that the dynamics of these orientational defects depend on bacterial length and can promote the survival of the longest bacteria around localized nutritional hot spots. The present results indicate a new mechanism underlying structural order and provide mechanistic insights into the dynamics of bacterial growth on complex surfaces.
△ Less
Submitted 13 November, 2021; v1 submitted 12 August, 2020;
originally announced August 2020.
-
Modelling the Effects of using Gas Diffusion Layers with Patterned Wettability for Advanced Water Management in Proton Exchange Membrane Fuel Cells
Authors:
Jaka Dujc,
Antoni Forner-Cuenca,
Philip Marmet,
Magali Cochet,
Roman Vetter,
Jürgen O. Schumacher
Abstract:
We present a macrohomogeneous two-phase model of a proton exchange membrane fuel cell (PEMFC). The model takes into account the mechanical compression of the gas diffusion layer (GDL), the two-phase flow of water, the transport of the gas species and the electrochemical reaction of the reactant gases. The model was used to simulate the behavior of a PEMFC with a patterned GDL. The results of the r…
▽ More
We present a macrohomogeneous two-phase model of a proton exchange membrane fuel cell (PEMFC). The model takes into account the mechanical compression of the gas diffusion layer (GDL), the two-phase flow of water, the transport of the gas species and the electrochemical reaction of the reactant gases. The model was used to simulate the behavior of a PEMFC with a patterned GDL. The results of the reduced model, which considers only the mechanical compression and the two-phase flow, are compared to the experimental ex-situ imbibition data obtained by neutron radiography imaging. The results are in good agreement. Additionally, by using all model features, a simulation of an operating fuel cell has been performed to study the intricate couplings in an operating fuel cell and to examine the patterned GDL effects. The model confirms that the patterned GDL design liberates the pre-defined domains from liquid water and thus locally increases the oxygen diffusivity.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Simulating isothermal aging of snow
Authors:
Roman Vetter,
Stephan Sigg,
Herman M. Singer,
Dirk Kadau,
Hans J. Herrmann,
Martin Schneebeli
Abstract:
A Monte Carlo algorithm to simulate the isothermal recrystallization process of snow is presented. The snow metamorphism is approximated by two mass redistribution processes, surface diffusion and sublimation-deposition. The algorithm is justified and its parametrization is determined. The simulation results are compared to experimental data, in particular, the temporal evolution of the specific s…
▽ More
A Monte Carlo algorithm to simulate the isothermal recrystallization process of snow is presented. The snow metamorphism is approximated by two mass redistribution processes, surface diffusion and sublimation-deposition. The algorithm is justified and its parametrization is determined. The simulation results are compared to experimental data, in particular, the temporal evolution of the specific surface area and the ice thickness. We find that the two effects of surface diffusion and sublimation-deposition can accurately model many aspects of the isothermal metamorphism of snow. Furthermore, it is shown that sublimation-deposition is the dominant contribution for temperatures close to the melting point, whereas surface diffusion dominates at temperatures far below the melting point. A simple approximation of gravitational compaction is implemented to simulate density change.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Collapse of orthotropic spherical shells
Authors:
Gautam Munglani,
Falk K. Wittel,
Roman Vetter,
Filippo Bianchi,
Hans J. Herrmann
Abstract:
We report on the buckling and subsequent collapse of orthotropic elastic spherical shells under volume and pressure control. Going far beyond what is known for isotropic shells, a rich morphological phase space with three distinct regimes emerges upon variation of shell slenderness and degree of orthotropy. Our extensive numerical simulations are in agreement with experiments using fabricated poly…
▽ More
We report on the buckling and subsequent collapse of orthotropic elastic spherical shells under volume and pressure control. Going far beyond what is known for isotropic shells, a rich morphological phase space with three distinct regimes emerges upon variation of shell slenderness and degree of orthotropy. Our extensive numerical simulations are in agreement with experiments using fabricated polymer shells. The shell buckling pathways and corresponding strain energy evolution are shown to depend strongly on material orthotropy. We find surprisingly robust orthotropic structures with strong similarities to stomatocytes and tricolpate pollen grains, suggesting that the shape of several of Nature's collapsed shells could be understood from the viewpoint of material orthotropy.
△ Less
Submitted 11 July, 2019; v1 submitted 22 March, 2019;
originally announced March 2019.
-
Emergence of active nematics in bacterial biofilms
Authors:
Yusuf Ilker Yaman,
Esin Demir,
Roman Vetter,
Askin Kocabas
Abstract:
Growing tissue and bacterial colonies are active matter systems where cell divisions and cellular motion generate active stress. Although they operate in the non-equilibrium regime, these biological systems can form large-scale ordered structures such as nematically aligned cells, topological defects, and fingerings. Mechanical instabilities also play an essential role during growth by generating…
▽ More
Growing tissue and bacterial colonies are active matter systems where cell divisions and cellular motion generate active stress. Although they operate in the non-equilibrium regime, these biological systems can form large-scale ordered structures such as nematically aligned cells, topological defects, and fingerings. Mechanical instabilities also play an essential role during growth by generating large structural folding. How active matter dynamics and mechanical instabilities together develop large-scale order in growing tissue is not well understood. Here, we use chain forming Bacillus subtilis, also known as a biofilm, to study the direct relation between active stress and nematic ordering. We find that a bacterial biofilm has intrinsic length scales above which series of mechanical instabilities occur. Localized stress and friction control both linear buckling and edge instabilities. Remarkably, these instabilities develop nematically aligned cellular structures and create pairs of motile and stationary topological defects. We also observe that stress distribution across the biofilm strongly depends on the defect dynamics which can further initiate the formation of sporulation sites by creating three-dimensional structures. By investigating the development of bacterial biofilms and their mechanical instabilities we are proposing a new type of active matter system which provides a unique platform to study the essential roles of nematics in growing biological tissue.
△ Less
Submitted 29 November, 2018;
originally announced November 2018.
-
Experimental parameter uncertainty in PEM fuel cell modeling. Part II: Sensitivity analysis and importance ranking
Authors:
Roman Vetter,
Jürgen O. Schumacher
Abstract:
Numerical modeling of proton exchange membrane fuel cells is at the verge of becoming predictive. A crucial requisite for this, though, is that material properties of the membrane-electrode assembly and their functional dependence on the conditions of operation are known with high precision. In this bipartite paper series we determine the most critical transport parameters for which accurate exper…
▽ More
Numerical modeling of proton exchange membrane fuel cells is at the verge of becoming predictive. A crucial requisite for this, though, is that material properties of the membrane-electrode assembly and their functional dependence on the conditions of operation are known with high precision. In this bipartite paper series we determine the most critical transport parameters for which accurate experimental characterization is required in order to enable the simulation of fuel cell operation with sufficient confidence from small to large current densities. In Part II, we employ the two-phase model developed in Part I to carry out extensive forward uncertainty propagation analyses. These include the study of local parameter sensitivity in the vicinity of a baseline parameter set, and a global sensitivity analysis in which a broad range of operating conditions and material properties is covered. A comprehensive ranking list of model parameters is presented, sorted by impact on predicted fuel cell properties such as the current-voltage characteristics and water balance. The top five in this list are, in this order: The membrane hydration isotherm, the electro-osmotic drag coefficient, the membrane thickness, the water diffusivity in the ionomer and its ionic conductivity.
△ Less
Submitted 25 November, 2018;
originally announced November 2018.
-
Experimental parameter uncertainty in PEM fuel cell modeling. Part I: Scatter in material parameterization
Authors:
Roman Vetter,
Jürgen O. Schumacher
Abstract:
Ever since modeling has become a mature part of proton exchange membrane fuel cell (PEMFC) research and development, it has been plagued by significant uncertainty lying in the detailed knowledge of material properties required. Experimental data published on several transport coefficients are scattered over orders of magnitude, even for the most extensively studied materials such as Nafion membra…
▽ More
Ever since modeling has become a mature part of proton exchange membrane fuel cell (PEMFC) research and development, it has been plagued by significant uncertainty lying in the detailed knowledge of material properties required. Experimental data published on several transport coefficients are scattered over orders of magnitude, even for the most extensively studied materials such as Nafion membranes, for instance. For PEMFC performance models to become predictive, high-quality input data is essential. In this bipartite paper series, we determine the most critical transport parameters for which accurate experimental characterization is required in order to enable performance prediction with sufficient confidence from small to large current densities. In the first part, a macro-homogeneous two-phase membrane-electrode assembly model is furnished with a comprehensive set of material parameterizations from the experimental and modeling literature. The computational model is applied to demonstrate the large spread in performance prediction resulting from experimentally measured or validated material parameterizations alone. The result of this is a ranking list of material properties, sorted by induced spread in the fuel cell performance curve. The three most influential parameters in this list stem from membrane properties: The Fickean diffusivity of dissolved water, the protonic conductivity and the electro-osmotic drag coefficient.
△ Less
Submitted 25 November, 2018;
originally announced November 2018.
-
Free open reference implementation of a two-phase PEM fuel cell model
Authors:
Roman Vetter,
Jürgen O. Schumacher
Abstract:
In almost 30 years of PEM fuel cell modeling, countless numerical models have been developed in science and industrial applications, almost none of which have been fully disclosed to the public. There is a large need for standardization and establishing a common ground not only in experimental characterization of fuel cells, but also in the development of simulation codes, to prevent each research…
▽ More
In almost 30 years of PEM fuel cell modeling, countless numerical models have been developed in science and industrial applications, almost none of which have been fully disclosed to the public. There is a large need for standardization and establishing a common ground not only in experimental characterization of fuel cells, but also in the development of simulation codes, to prevent each research group from having to start anew from scratch. Here, we publish the first open standalone implementation of a full-blown, steady-state, non-isothermal two-phase model for low-temperature PEM fuel cells. It is based on macro-homogeneous modeling approaches and implements the most essential through-plane transport processes in a five-layer MEA. The focus is on code simplicity and compactness with only a few hundred lines of clearly readable code, providing a starting point for more complex model development. The model is implemented as a standalone MATLAB function, based on MATLAB's standard boundary value problem solver. The default simulation setup reflects wide-spread commercially available MEA materials. Operating conditions recommended for automotive applications by the European Commission are used to establish new fuel cell simulation base data, making our program a valuable candidate for model comparison, validation and benchmarking.
△ Less
Submitted 24 November, 2018;
originally announced November 2018.
-
Orthotropic rotation-free thin shell elements
Authors:
Gautam Munglani,
Roman Vetter,
Falk K. Wittel,
Hans J. Herrmann
Abstract:
A method to simulate orthotropic behaviour in thin shell finite elements is proposed. The approach is based on the transformation of shape function derivatives, resulting in a new orthogonal basis aligned to a specified preferred direction for all elements. This transformation is carried out solely in the undeformed state leaving minimal additional impact on the computational effort expended to si…
▽ More
A method to simulate orthotropic behaviour in thin shell finite elements is proposed. The approach is based on the transformation of shape function derivatives, resulting in a new orthogonal basis aligned to a specified preferred direction for all elements. This transformation is carried out solely in the undeformed state leaving minimal additional impact on the computational effort expended to simulate orthotropic materials compared to isotropic, resulting in a straightforward and highly efficient implementation. This method is implemented for rotation-free triangular shells using the finite element framework built on the Kirchhoff--Love theory employing subdivision surfaces. The accuracy of this approach is demonstrated using the deformation of a pinched hemispherical shell (with a 18° hole) standard benchmark. To showcase the efficiency of this implementation, the wrinkling of orthotropic sheets under shear displacement is analyzed. It is found that orthotropic subdivision shells are able to capture the wrinkling behavior of sheets accurately for coarse meshes without the use of an additional wrinkling model.
△ Less
Submitted 3 August, 2015;
originally announced August 2015.
-
Simulating Thin Sheets: Buckling, Wrinkling, Folding and Growth
Authors:
Roman Vetter,
Norbert Stoop,
Falk K. Wittel,
Hans J. Herrmann
Abstract:
Numerical simulations of thin sheets undergoing large deformations are computationally challenging. Depending on the scenario, they may spontaneously buckle, wrinkle, fold, or crumple. Nature's thin tissues often experience significant anisotropic growth, which can act as the driving force for such instabilities. We use a recently developed finite element model to simulate the rich variety of nonl…
▽ More
Numerical simulations of thin sheets undergoing large deformations are computationally challenging. Depending on the scenario, they may spontaneously buckle, wrinkle, fold, or crumple. Nature's thin tissues often experience significant anisotropic growth, which can act as the driving force for such instabilities. We use a recently developed finite element model to simulate the rich variety of nonlinear responses of Kirchhoff-Love sheets. The model uses subdivision surface shape functions in order to guarantee convergence of the method, and to allow a finite element description of anisotropically growing sheets in the classical Rayleigh-Ritz formalism. We illustrate the great potential in this approach by simulating the inflation of airbags, the buckling of a stretched cylinder, as well as the formation and scaling of wrinkles at free boundaries of growing sheets. Finally, we compare the folding of spatially confined sheets subject to growth and shrinking confinement to find that the two processes are equivalent.
△ Less
Submitted 31 July, 2015;
originally announced July 2015.
-
Packing of elastic wires in flexible shells
Authors:
Roman Vetter,
Falk K. Wittel,
Hans J. Herrmann
Abstract:
The packing problem of long thin filaments that are injected into confined spaces is of fundamental interest for physicists and biologists alike. How linear threads pack and coil is well known only for the ideal case of rigid containers, though. Here, we force long elastic rods into flexible spatial confinement borne by an elastic shell to examine under which conditions recently acquired knowledge…
▽ More
The packing problem of long thin filaments that are injected into confined spaces is of fundamental interest for physicists and biologists alike. How linear threads pack and coil is well known only for the ideal case of rigid containers, though. Here, we force long elastic rods into flexible spatial confinement borne by an elastic shell to examine under which conditions recently acquired knowledge on wire packing in rigid spheres breaks down. We find that unlike in rigid cavities, friction plays a key role by giving rise to the emergence of two distinct packing patterns. At low friction, the wire densely coils into an ordered toroidal bundle with semi-ellipsoidal cross-section, while at high friction, it packs into a highly disordered, hierarchic structure. These two morphologies are shown to be separated by a continuous phase transition. Our findings demonstrate the dramatic impact of friction and confinement elasticity on filamentous packing and might drive future research on such systems in physics, biology and even medical technology toward including these mutually interacting effects.
△ Less
Submitted 9 December, 2015; v1 submitted 3 April, 2015;
originally announced April 2015.
-
Particle-fluid-structure interaction for debris flow impact on flexible barriers
Authors:
Alessandro Leonardi,
Falk K. Wittel,
Miller Mendoza,
Roman Vetter,
Hans J. Herrmann
Abstract:
Flexible barriers are increasingly used for the protection from debris flow in mountainous terrain due to their low cost and environmental impact. However, a numerical tool for rational design of such structures is still missing. In this work, a hybrid computational framework is presented, using a total Lagrangian formulation of the Finite Element Method (FEM) to represent a flexible barrier. The…
▽ More
Flexible barriers are increasingly used for the protection from debris flow in mountainous terrain due to their low cost and environmental impact. However, a numerical tool for rational design of such structures is still missing. In this work, a hybrid computational framework is presented, using a total Lagrangian formulation of the Finite Element Method (FEM) to represent a flexible barrier. The actions exerted on the structure by a debris flow are obtained from simultaneous simulations of the flow of a fluid-grain mixture, using two conveniently coupled solvers: the Discrete Element Method (DEM) governs the motion of the grains, while the free-surface non-Newtonian fluid phase is solved using the Lattice-Boltzmann Method (LBM). Simulations on realistic geometries show the dependence of the momentum transfer on the barrier on the composition of the debris flow, challenging typical assumptions made during the design process today. In particular, we demonstrate that both grains and fluid contribute in a non-negligible way to the momentum transfer. Moreover, we show how the flexibility of the barrier reduces its vulnerability to structural collapse, and how the stress is distributed on its fabric, highlighting potential weak points.
△ Less
Submitted 29 September, 2014;
originally announced September 2014.
-
Morphogenesis of filaments growing in flexible confinements
Authors:
Roman Vetter,
Falk K. Wittel,
Hans J. Herrmann
Abstract:
Space-saving design is a requirement that is encountered in biological systems and the development of modern technological devices alike. Many living organisms dynamically pack their polymer chains, filaments or membranes inside of deformable vesicles or soft tissue like cell walls, chorions, and buds. Surprisingly little is known about morphogenesis due to growth in flexible confinements - perhap…
▽ More
Space-saving design is a requirement that is encountered in biological systems and the development of modern technological devices alike. Many living organisms dynamically pack their polymer chains, filaments or membranes inside of deformable vesicles or soft tissue like cell walls, chorions, and buds. Surprisingly little is known about morphogenesis due to growth in flexible confinements - perhaps owing to the daunting complexity lying in the nonlinear feedback between packed material and expandable cavity. Here we show by experiments and simulations how geometric and material properties lead to a plethora of morphologies when elastic filaments are growing far beyond the equilibrium size of a flexible thin sheet they are confined in. Depending on friction, sheet flexibility and thickness, we identify four distinct morphological phases emerging from bifurcation and present the corresponding phase diagram. Four order parameters quantifying the transitions between these phases are proposed.
△ Less
Submitted 17 July, 2014;
originally announced July 2014.
-
Subdivision Shell Elements with Anisotropic Growth
Authors:
Roman Vetter,
Norbert Stoop,
Thomas Jenni,
Falk K. Wittel,
Hans J. Herrmann
Abstract:
A thin shell finite element approach based on Loop's subdivision surfaces is proposed, capable of dealing with large deformations and anisotropic growth. To this end, the Kirchhoff-Love theory of thin shells is derived and extended to allow for arbitrary in-plane growth. The simplicity and computational efficiency of the subdivision thin shell elements is outstanding, which is demonstrated on a fe…
▽ More
A thin shell finite element approach based on Loop's subdivision surfaces is proposed, capable of dealing with large deformations and anisotropic growth. To this end, the Kirchhoff-Love theory of thin shells is derived and extended to allow for arbitrary in-plane growth. The simplicity and computational efficiency of the subdivision thin shell elements is outstanding, which is demonstrated on a few standard loading benchmarks. With this powerful tool at hand, we demonstrate the broad range of possible applications by numerical solution of several growth scenarios, ranging from the uniform growth of a sphere, to boundary instabilities induced by large anisotropic growth. Finally, it is shown that the problem of a slowly and uniformly growing sheet confined in a fixed hollow sphere is equivalent to the inverse process where a sheet of fixed size is slowly crumpled in a shrinking hollow sphere in the frictionless, quasi-static, elastic limit.
△ Less
Submitted 27 March, 2013; v1 submitted 22 August, 2012;
originally announced August 2012.
-
Finite Element Simulation of Dense Wire Packings
Authors:
Roman Vetter,
Falk K. Wittel,
Norbert Stoop,
Hans J. Herrmann
Abstract:
A finite element program is presented to simulate the process of packing and coiling elastic wires in two- and three-dimensional confining cavities. The wire is represented by third order beam elements and embedded into a corotational formulation to capture the geometric nonlinearity resulting from large rotations and deformations. The hyperbolic equations of motion are integrated in time using tw…
▽ More
A finite element program is presented to simulate the process of packing and coiling elastic wires in two- and three-dimensional confining cavities. The wire is represented by third order beam elements and embedded into a corotational formulation to capture the geometric nonlinearity resulting from large rotations and deformations. The hyperbolic equations of motion are integrated in time using two different integration methods from the Newmark family: an implicit iterative Newton-Raphson line search solver, and an explicit predictor-corrector scheme, both with adaptive time step**. These two approaches reveal fundamentally different suitability for the problem of strongly self-interacting bodies found in densely packed cavities. Generalizing the spherical confinement symmetry investigated in recent studies, the packing of a wire in hard ellipsoidal cavities is simulated in the frictionless elastic limit. Evidence is given that packings in oblate spheroids and scalene ellipsoids are energetically preferred to spheres.
△ Less
Submitted 3 July, 2012; v1 submitted 22 November, 2011;
originally announced November 2011.
-
Modular Workflow Engine for Distributed Services using Lightweight Java Clients
Authors:
R. -M. Vetter,
W. Lennartz,
J. -V. Peetz
Abstract:
In this article we introduce the concept and the first implementation of a lightweight client-server-framework as middleware for distributed computing. On the client side an installation without administrative rights or privileged ports can turn any computer into a worker node. Only a Java runtime environment and the JAR files comprising the workflow client are needed. To connect all clients to…
▽ More
In this article we introduce the concept and the first implementation of a lightweight client-server-framework as middleware for distributed computing. On the client side an installation without administrative rights or privileged ports can turn any computer into a worker node. Only a Java runtime environment and the JAR files comprising the workflow client are needed. To connect all clients to the engine one open server port is sufficient. The engine submits data to the clients and orchestrates their work by workflow descriptions from a central database. Clients request new task descriptions periodically, thus the system is robust against network failures. In the basic set-up, data up- and downloads are handled via HTTP communication with the server. The performance of the modular system could additionally be improved using dedicated file servers or distributed network file systems.
We demonstrate the design features of the proposed engine in real-world applications from mechanical engineering. We have used this system on a compute cluster in design-of-experiment studies, parameter optimisations and robustness validations of finite element structures.
△ Less
Submitted 2 December, 2009;
originally announced December 2009.
-
Data Mining on Crash Simulation Data
Authors:
A. Kuhlmann,
R. -M. Vetter,
Ch. Luebbing,
C. -A. Thole
Abstract:
The work presented in this paper is part of the cooperative research project AUTO-OPT carried out by twelve partners from the automotive industries. One major work package concerns the application of data mining methods in the area of automotive design. Suitable methods for data preparation and data analysis are developed. The objective of the work is the re-use of data stored in the crash-simul…
▽ More
The work presented in this paper is part of the cooperative research project AUTO-OPT carried out by twelve partners from the automotive industries. One major work package concerns the application of data mining methods in the area of automotive design. Suitable methods for data preparation and data analysis are developed. The objective of the work is the re-use of data stored in the crash-simulation department at BMW in order to gain deeper insight into the interrelations between the geometric variations of the car during its design and its performance in crash testing. In this paper a method for data analysis of finite element models and results from crash simulation is proposed and application to recent data from the industrial partner BMW is demonstrated. All necessary steps from data pre-processing to re-integration into the working environment of the engineer are covered.
△ Less
Submitted 2 May, 2005;
originally announced May 2005.
-
Nonlocal reflection by photonic barriers
Authors:
R. -M. Vetter,
A. Haibel,
G. Nimtz
Abstract:
The time behaviour of microwaves undergoing partial reflection by photonic barriers was measured in the time and in the frequency domain. It was observed that unlike the duration of partial reflection by dielectric layers, the measured reflection duration of barriers is independent of their length. The experimental results point to a nonlocal behaviour of evanescent modes at least over a distanc…
▽ More
The time behaviour of microwaves undergoing partial reflection by photonic barriers was measured in the time and in the frequency domain. It was observed that unlike the duration of partial reflection by dielectric layers, the measured reflection duration of barriers is independent of their length. The experimental results point to a nonlocal behaviour of evanescent modes at least over a distance of some ten wavelengths. Evanescent modes correspond to photonic tunnelling in quantum mechanics.
△ Less
Submitted 3 August, 2001; v1 submitted 22 March, 2001;
originally announced March 2001.
-
Negative phase time for Scattering at Quantum Wells: A Microwave Analogy Experiment
Authors:
R. -M. Vetter,
A. Haibel,
G. Nimtz
Abstract:
If a quantum mechanical particle is scattered by a potential well, the wave function of the particle can propagate with negative phase time. Due to the analogy of the Schrödinger and the Helmholtz equation this phenomenon is expected to be observable for electromagnetic wave propagation. Experimental data of electromagnetic wells realized by wave guides filled with different dielectrics confirm…
▽ More
If a quantum mechanical particle is scattered by a potential well, the wave function of the particle can propagate with negative phase time. Due to the analogy of the Schrödinger and the Helmholtz equation this phenomenon is expected to be observable for electromagnetic wave propagation. Experimental data of electromagnetic wells realized by wave guides filled with different dielectrics confirm this conjecture now.
△ Less
Submitted 29 June, 2000;
originally announced June 2000.
