-
Laser Interactions with Gas Jets: EMP Emission and Nozzle Damage
Authors:
Philip Wykeham Bradford,
Valeria Ospina-Bohorquez,
Michael Ehret,
Jose-Luis Henares,
Pilar Puyuelo-Valdes,
Tomasz Chodukowski,
Tadeusz Pisarczyk,
Zofia Rusiniak,
Carlos Salgado-Lopez,
Christos Vlachos,
Massimiliano Sciscio,
Martina Salvadori,
Claudio Verona,
George Hicks,
Jean-Raphael Marques,
Laurent Gremillet,
Joao Jorge Santos,
Fabrizio Consoli,
Vladimir Tikhonchuk
Abstract:
We present a theoretical model of electromagnetic pulse emission and nozzle damage from high-power laser interactions with gas jets. As hot electrons are accelerated beyond the laser channel, they produce a positively-charged plasma that expands into the ambient gas until it reaches the gas jet nozzle. A strong plasma potential leads to electrical breakdown that ionises the gas even faster than th…
▽ More
We present a theoretical model of electromagnetic pulse emission and nozzle damage from high-power laser interactions with gas jets. As hot electrons are accelerated beyond the laser channel, they produce a positively-charged plasma that expands into the ambient gas until it reaches the gas jet nozzle. A strong plasma potential leads to electrical breakdown that ionises the gas even faster than the expanding plasma ions. When contact is made between the plasma and the conducting nozzle surface, a discharge current propagates to ground and an electromagnetic pulse is radiated via an antenna emission mechanism. Damage to gas jet nozzles is caused by heating from plasma ions rather than Ohmic heating via a discharge current. Our model agrees with experimental data from experiments on proton acceleration in near-critical plasmas at the Vulcan and VEGA-3 lasers.
△ Less
Submitted 22 April, 2024; v1 submitted 28 March, 2024;
originally announced March 2024.
-
Radioisotopes production using lasers: from basic science to applications
Authors:
M. R. D. Rodrigues,
A. Bonasera,
M. Scisciò,
J. A. Pérez-Hernández,
M. Ehret,
F. Filippi,
P. L. Andreoli,
M. Huault,
H. Larreur,
D. Singappuli,
D. Molloy,
D. Raffestin,
M. Alonzo,
G. G. Rapisarda,
D. Lattuada,
G. L. Guardo,
C. Verona,
Fe. Consoli,
G. Petringa,
A. McNamee,
M. La Cognata,
S. Palmerini,
T. Carriere,
M. Cipriani,
G. Di Giorgio
, et al. (15 additional authors not shown)
Abstract:
Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions c…
▽ More
Laser technologies improved after the understanding of the Chirped Pulse Amplification (CPA) which allows energetic laser beams to be compressed to tens of femtosecond (fs) pulse durations and focused to few $μ$m. Protons of tens of MeV can be accelerated using for instance the Target Normal Sheath Acceleration (TNSA) method and focused on secondary targets. In such conditions, nuclear reactions can occur and radioisotopes relevant for medical purposes be produced. High repetition lasers can be used to produce enough isotopes for medical applications. This route is competitive to conventional methods mostly based on accelerators. In this paper we study the production of $^{67}$Cu, $^{63}$Zn, $^{18}$F and $^{11}$C currently used in positron emission tomography (PET) and other applications. At the same time, we study the reaction $^{10}$B(p,$α$)$^{7}$Be and $^{70}$Zn(p,4n)$^{67}$Ga to put further constraints to the proton distributions at different angles and to the reaction $^{11}$B(p,$α$)$^{8}$Be relevant for energy production. The experiment was performed at the 1 petawatt (PW) laser facility at Vega III located in Salamanca-Spain. Angular distributions of radioisotopes in the forward (with respect to the laser direction) and backward directions were measured using a High Purity Germanium Detector (HPGE). Our results are reasonably reproduced by the numerical estimates following the approach of Kimura et al. (NIMA637(2011)167)
△ Less
Submitted 14 December, 2023;
originally announced December 2023.
-
Laser-driven ion and electron acceleration from near-critical density gas targets: towards high-repetition rate operation in the 1 PW, sub-100 fs laser interaction regime
Authors:
V. Ospina-Bohórquez,
C. Salgado-López,
M. Ehret,
S. Malko,
M. Salvadori,
T. Pisarczyk,
T. Chodukowski,
Z. Rusiniak,
M. Krupka,
P. GuillonM. Lendrin,
G. Pérez-Callejo,
C. Vlachos,
F. Hannachi,
M. Tarisien,
F. Consoli,
C. Verona,
G. Prestopino,
J. Dostal,
R. Dudzak,
J. L. Henares,
J. I. Apiñaniz,
D. DeLuis,
A. Debayle,
J. Caron,
T. Ceccotti
, et al. (12 additional authors not shown)
Abstract:
Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 90s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ($\sim 10^{20}\,\rm W\,cm^{-2}$, 1 PW), ultrashort ($\sim 70\,\rm fs$) Ti:Sa laser…
▽ More
Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 90s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ($\sim 10^{20}\,\rm W\,cm^{-2}$, 1 PW), ultrashort ($\sim 70\,\rm fs$) Ti:Sa laser pulses with near-critical ($\sim 10^{20}\,\rm cm^{-3}$) helium gas jets, a debris-free targetry compatible with high ($\sim 1\,\rm Hz$) repetition rate operation. We provide evidence of $α$ particles being forward accelerated up to $\sim 2.7\,\rm MeV$ energy with a total flux of $\sim 10^{11}\,\rm sr^{-1}$ as integrated over $>0.1 \,\rm MeV$ energies and detected within a $0.5\,\rm mrad$ solid angle. We also report on on-axis emission of relativistic electrons with an exponentially decaying spectrum characterized by a $\sim 10\,\rm MeV$ slope, i.e., five times larger than the standard ponderomotive scaling. The total charge of these electrons with energy above 2 MeV is estimated to be of $\sim 1 \,\rm nC$, corresponding to $\sim 0.1\,\%$ of the laser drive energy. In addition, we observe the formation of a plasma channel, extending longitudinally across the gas density maximum and expanding radially with time. These results are well captured by large-scale particle-in-cell simulations, which reveal that the detected fast ions most likely originate from reflection off the rapidly expanding channel walls. The latter process is predicted to yield ion energies in the MeV range, which compare well with the measurements. Finally, direct laser acceleration is shown to be the dominant mechanism behind the observed electron energization.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Time-Of-Flight methodologies with large-area diamond detectors for ion characterization in laser-driven experiments
Authors:
M. Salvadori,
G. Di Giorgio,
M. Cipriani,
C. Verona,
P. L. Andreoli,
G. Cristofari,
R. De Angelis,
M. Pillon,
N. E. Andreev,
P. Antici,
N. G. Borisenko,
D. Giulietti,
M. Migliorati,
O. Rosmej,
S. Zahter,
F. Consoli
Abstract:
Time-Of-Flight (TOF) technique coupled with semiconductor detectors is a powerful instrument to provide real-time characterization of ions accelerated because of laser-matter interactions. Nevertheless, the presence of strong electromagnetic pulses (EMPs) generated during the interactions, can severely hinder its employment. For this reason, the diagnostic system must be designed to have high EMP…
▽ More
Time-Of-Flight (TOF) technique coupled with semiconductor detectors is a powerful instrument to provide real-time characterization of ions accelerated because of laser-matter interactions. Nevertheless, the presence of strong electromagnetic pulses (EMPs) generated during the interactions, can severely hinder its employment. For this reason, the diagnostic system must be designed to have high EMP shielding. Here we present a new advanced prototype of detector, developed at ENEA-Centro Ricerche Frascati (Italy), with a large area (15 mm x 15 mm) polycrystalline diamond sensor having 150 microns thickness. The tailored detector design and testing ensure high sensitivity and, thanks to the fast temporal response, high energy resolution of the reconstructed ion spectrum. The detector was offline calibrated and then successfully tested during an experimental campaign carried out at the PHELIX laser facility at GSI (Germany). The high rejection to EMP fields was demonstrated and suitable calibrated spectra of the accelerated protons were obtained.
△ Less
Submitted 29 October, 2021;
originally announced October 2021.
-
CLUE: Exact maximal reduction of kinetic models by constrained lum** of differential equations
Authors:
Alexey Ovchinnikov,
Isabel Cristina Pérez Verona,
Gleb Pogudin,
Mirco Tribastone
Abstract:
Motivation: Detailed mechanistic models of biological processes can pose significant challenges for analysis and parameter estimations due to the large number of equations used to track the dynamics of all distinct configurations in which each involved biochemical species can be found. Model reduction can help tame such complexity by providing a lower-dimensional model in which each macro-variable…
▽ More
Motivation: Detailed mechanistic models of biological processes can pose significant challenges for analysis and parameter estimations due to the large number of equations used to track the dynamics of all distinct configurations in which each involved biochemical species can be found. Model reduction can help tame such complexity by providing a lower-dimensional model in which each macro-variable can be directly related to the original variables.
Results: We present CLUE, an algorithm for exact model reduction of systems of polynomial differential equations by constrained linear lum**. It computes the smallest dimensional reduction as a linear map** of the state space such that the reduced model preserves the dynamics of user-specified linear combinations of the original variables. Even though CLUE works with nonlinear differential equations, it is based on linear algebra tools, which makes it applicable to high-dimensional models. Using case studies from the literature, we show how CLUE can substantially lower model dimensionality and help extract biologically intelligible insights from the reduction.
Availability: An implementation of the algorithm and relevant resources to replicate the experiments herein reported are freely available for download at https://github.com/pogudingleb/CLUE.
Supplementary information: enclosed.
△ Less
Submitted 14 December, 2020; v1 submitted 24 April, 2020;
originally announced April 2020.
-
Accurate spectra for high energy ions by advanced time-of-flight diamond-detector schemes in experiments with high energy and intensity lasers
Authors:
M. Salvadori,
F. Consoli,
C. Verona,
M. Cipriani,
M. P. Anania,
P. L. Andreoli,
P. Antici,
F. Bisesto,
G. Costa,
G. Cristofari,
R. De Angelis,
G. Di Giorgio,
M. Ferrario,
M. Galletti,
D. Giulietti,
M. Migliorati,
R. Pompili,
A. Zigler
Abstract:
Time-Of-Flight (TOF) methods are very effective to detect particles accelerated in laser-plasma interactions, but they shows significant limitations when used in experiments with high energy and intensity lasers, where both high-energy ions and remarkable levels of ElectroMagnetic Pulses (EMPs) in the radiofrequency-microwave range are generated. Here we describe a novel advanced diagnostic method…
▽ More
Time-Of-Flight (TOF) methods are very effective to detect particles accelerated in laser-plasma interactions, but they shows significant limitations when used in experiments with high energy and intensity lasers, where both high-energy ions and remarkable levels of ElectroMagnetic Pulses (EMPs) in the radiofrequency-microwave range are generated. Here we describe a novel advanced diagnostic method for the characterization of protons accelerated by intense matter interactions with high-energy and high-intensity ultra-short laser pulses up to the femtosecond and even future attosecond range. The method employs a stacked diamond detector structure and the TOF technique, featuring high sensitivity, high resolution, high radiation hardness and high signal-to-noise ratio in environments heavily affected by remarkable EMP fields. A detailed study on the use, the optimization and the properties of a single module of the stack is here also described for an experiment where a fast diamond detector is employed in an highly EMP-polluted environment. Accurate calibrated spectra of accelerated protons are presented from an experiment with the femtosecond Flame laser (beyond 100 TW power and ~$10^{19}$ W/cm$^2$ intensity) interacting with thin foil targets. The results that can be readily applied to the case of complex stack configurations and to more general experimental conditions.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Photo-physical properties of He-related color centers in diamond
Authors:
G. Prestopino,
M. Marinelli,
E. Milani,
C. Verona,
G. Verona-Rinati P. Traina,
E. Moreva,
I. P. Degiovanni,
M. Genovese,
S. Ditalia Tchernij,
F. Picollo,
P. Olivero,
J. Forneris
Abstract:
Diamond is a promising platform for the development of technological applications in quantum optics and photonics. The quest for color centers with optimal photo-physical properties has led in recent years to the search for novel impurity-related defects in this material. Here, we report on a systematic investigation of the photo-physical properties of two He-related (HR) emission lines at 535 nm…
▽ More
Diamond is a promising platform for the development of technological applications in quantum optics and photonics. The quest for color centers with optimal photo-physical properties has led in recent years to the search for novel impurity-related defects in this material. Here, we report on a systematic investigation of the photo-physical properties of two He-related (HR) emission lines at 535 nm and 560 nm created in three different diamond substrates upon implantation with 1.3 MeV He+ ions and subsequent annealing. The spectral features of the HR centers were studied in an "optical grade" diamond substrate as a function of several physical parameters, namely the measurement temperature, the excitation wavelength and the intensity of external electric fields. The emission lifetimes of the 535 nm and 560 nm lines were also measured by means of time-gated photoluminescence measurements, yielding characteristic decay times of (29 +- 5) ns and (106 +- 10) ns, respectively. The Stark shifting of the HR centers under the application of an external electrical field was observed in a CVD diamond film equipped with buried graphitic electrodes, suggesting a lack of inversion symmetry in the defects' structure. Furthermore, the photoluminescence map** under 405 nm excitation of a "detector grade" diamond sample implanted at a 1x1010 cm-2 He+ ion fluence enabled to identify the spectral features of both the HR emission lines from the same localized optical spots. The reported results provide a first insight towards the understanding of the structure of He-related defects in diamond and their possible utilization in practical applications
△ Less
Submitted 29 August, 2017;
originally announced August 2017.
-
Lateral IBIC characterization of single crystal synthetic diamond detectors
Authors:
A. Lo Giudice,
P. Olivero,
C. Manfredotti,
M. Marinelli,
E. Milani,
F. Picollo,
G. Prestopino,
A. Re,
V. Rigato,
C. Verona,
G. Verona-Rinati,
E. Vittone
Abstract:
In order to evaluate the charge collection efficiency (CCE) profile of single-crystal diamond devices based on a p type/intrinsic/metal configuration, a lateral Ion Beam Induced Charge (IBIC) analysis was performed over their cleaved cross sections using a 2 MeV proton microbeam. CCE profiles in the depth direction were extracted from the cross-sectional maps at variable bias voltage. IBIC spectra…
▽ More
In order to evaluate the charge collection efficiency (CCE) profile of single-crystal diamond devices based on a p type/intrinsic/metal configuration, a lateral Ion Beam Induced Charge (IBIC) analysis was performed over their cleaved cross sections using a 2 MeV proton microbeam. CCE profiles in the depth direction were extracted from the cross-sectional maps at variable bias voltage. IBIC spectra relevant to the depletion region extending beneath the frontal Schottky electrode show a 100% CCE, with a spectral resolution of about 1.5%. The dependence of the width of the high efficiency region from applied bias voltage allows the constant residual do** concentration of the active region to be evaluated. The region where the electric field is absent shows an exponentially decreasing CCE profile, from which it is possible to estimate the diffusion length of the minority carriers by means of a drift-diffusion model.
△ Less
Submitted 25 August, 2016;
originally announced August 2016.
-
IBIC characterization of an ion-beam-micromachined multi-electrode diamond detector
Authors:
J. Forneris,
V. Grilj,
M. Jaksic,
A. Lo Giudice,
P. Olivero,
F. Picollo,
N. Skukan,
C. Verona,
G. Verona-Rinati,
E. Vittone
Abstract:
Deep Ion Beam Lithography (DIBL) has been used for the direct writing of buried graphitic regions in monocrystalline diamond with micrometric resolution. Aiming at the development and the characterization of a fully ion-beam-micromachined solid state ionization chamber, a device with interdigitated electrodes was fabricated by using a 1.8 MeV He+ ion microbeam scanning on a homoepitaxial, grown by…
▽ More
Deep Ion Beam Lithography (DIBL) has been used for the direct writing of buried graphitic regions in monocrystalline diamond with micrometric resolution. Aiming at the development and the characterization of a fully ion-beam-micromachined solid state ionization chamber, a device with interdigitated electrodes was fabricated by using a 1.8 MeV He+ ion microbeam scanning on a homoepitaxial, grown by chemical vapour deposition (CVD). In order to evaluate the ionizing-radiation-detection performance of the device, charge collection efficiency (CCE) maps were extracted from Ion Beam Induced Charge (IBIC) measurements carried out by probing different arrangements of buried microelectrodes. The analysis of the CCE maps allowed for an exhaustive evaluation of the detector features, in particular the individuation of the different role played by electrons and holes in the formation of the induced charge pulses. Finally, a comparison of the performances of the detector with buried graphitic electrodes with those relevant to conventional metallic surface electrodes evidenced the formation of a dead layer overlying the buried electrodes as a result of the fabrication process.
△ Less
Submitted 25 August, 2016;
originally announced August 2016.
-
A 3-dimensional interdigitated electrode geometry for the enhancement of charge collection efficiency in diamond detectors
Authors:
J. Forneris,
A. Lo Giudice,
P. Olivero,
F. Picollo,
A. Re,
M. Marinelli,
F. Pompili,
C. Verona,
G. Verona Rinati,
M. Benetti,
D. Cannata,
F. Di Pietrantonio
Abstract:
In this work, a single crystal CVD diamond film with a novel three-dimensional (3D) interdigitated electrode geometry has been fabricated with the Reactive Ion Etching (RIE) technique in order to increase the charge collection efficiency (CCE) with respect to that obtained by standard superficial electrodes. The geometrical arrangement of the electric field lines due to the 3D patterning of the el…
▽ More
In this work, a single crystal CVD diamond film with a novel three-dimensional (3D) interdigitated electrode geometry has been fabricated with the Reactive Ion Etching (RIE) technique in order to increase the charge collection efficiency (CCE) with respect to that obtained by standard superficial electrodes. The geometrical arrangement of the electric field lines due to the 3D patterning of the electrodes results in a shorter travel path for the excess charge carriers, thus contributing to a more efficient charge collection mech-anism. The CCE of the device was mapped by means of the Ion Beam Induced Charge (IBIC) technique. A 1 MeV proton micro-beam was raster scanned over the active area of the diamond detector under different bias voltage conditions, enabling to probe the charge transport properties of the detector up to a depth of 8 μm below the sample surface. The experimental results, supported by the numerical simulations, show a significant improvement in the 3D-detector performance (i.e. CCE, energy resolution, extension of the active area) if compared with the results obtained by standard surface metallic electrodes.
△ Less
Submitted 25 August, 2016;
originally announced August 2016.
-
Electroluminescence from a diamond device with ion-beam-micromachined buried graphitic electrodes
Authors:
J. Forneris,
A. Battiato,
D. Gatto Monticone,
F. Picollo,
G. Amato,
L. Boarino,
G. Brida,
I. P. Degiovanni,
E. Enrico,
M. Genovese,
E. Moreva,
P. Traina,
C. Verona,
G. Verona-Rinati,
P. Olivero
Abstract:
Focused MeV ion microbeams are suitable tools for the direct writing of conductive graphitic channels buried in an insulating diamond bulk, as demonstrated in previous works with the fabrication of multi-electrode ionizing radiation detectors and cellular biosensors. In this work we investigate the suitability of the fabrication method for the electrical excitation of colour centres in diamond. Di…
▽ More
Focused MeV ion microbeams are suitable tools for the direct writing of conductive graphitic channels buried in an insulating diamond bulk, as demonstrated in previous works with the fabrication of multi-electrode ionizing radiation detectors and cellular biosensors. In this work we investigate the suitability of the fabrication method for the electrical excitation of colour centres in diamond. Differently from photoluminescence, electroluminescence requires an electrical current flowing through the diamond sub-gap states for the excitation of the colour centres. With this purpose, buried graphitic electrodes with a spacing of 10 micrometers were fabricated in the bulk of a detector-grade CVD single-crystal diamond sample using a scanning 1.8 MeV He micro-beam. The current flowing in the gap region between the electrodes upon the application of a 250 V bias voltage was exploited as the excitation pump for the electroluminescence of different types of colour centres localized in the above-mentioned gap. The bright light emission was spatially mapped using a confocal optical microscopy setup. The spectral analysis of electroluminescence revealed the emission from neutrally-charged nitrogen-vacancy centres ($NV^0$, $λ_{ZPL}$ = 575 nm), as well as from cluster crystal dislocations (A-band, λ = 400-500 nm). Moreover, an electroluminescence signal with appealing spectral features (sharp emission at room temperature, low phonon sidebands) from He-related defects was detected ($λ_{ZPL}$ = 536.3 nm, $λ_{ZPL}$ = 560.5 nm); a low and broad peak around λ = 740 nm was also observed and tentatively ascribed to Si-V or GR1 centres. These results pose interesting future perspectives for the fabrication of electrically-stimulated single-photon emitters in diamond for applications in quantum optics and quantum cryptography.
△ Less
Submitted 29 July, 2014;
originally announced July 2014.
-
Measurement and modelling of anomalous polarity pulses in a multi-electrode diamond detector
Authors:
J. Forneris,
V. Grilj,
M. Jaksic,
P. Olivero,
F. Picollo,
N. Skukan,
C. Verona,
G. Verona-Rinati,
E. Vittone
Abstract:
In multi-electrode detectors, the motion of excess carriers generated by ionizing radiation induces charge pulses at the electrodes, whose intensities and polarities depend on the geometrical, electrostatic and carriers transport properties of the device. The resulting charge sharing effects may lead to bipolar currents, pulse height defects and anomalous polarity signals affecting the response of…
▽ More
In multi-electrode detectors, the motion of excess carriers generated by ionizing radiation induces charge pulses at the electrodes, whose intensities and polarities depend on the geometrical, electrostatic and carriers transport properties of the device. The resulting charge sharing effects may lead to bipolar currents, pulse height defects and anomalous polarity signals affecting the response of the device to ionizing radiation. This latter effect has recently attracted attention in commonly used detector materials, but different interpretations have been suggested, depending on the material, the geometry of the device and the nature of the ionizing radiation. In this letter, we report on the investigation in the formation of anomalous polarity pulses in a multi-electrode diamond detector with buried graphitic electrodes. In particular, we propose a purely electrostatic model based on the Shockley-Ramo-Gunn theory, providing a satisfactory description of anomalous pulses observed in charge collection efficiency maps measured by means of Ion Beam Induced Charge (IBIC) microscopy, and suitable for a general application in multi-electrode devices and detectors.
△ Less
Submitted 17 December, 2013;
originally announced December 2013.