-
A Cryogenic Sapphire Resonator Oscillator with 1e-16 mid-term fractional frequency stability
Authors:
Christophe Fluhr,
Benoit Dubois,
Claudio E. Calosso,
Francois Vernotte,
Enrico Rubiola,
Vincent Giordano
Abstract:
We report in this letter the outstanding frequency stability performances of an autonomous cryogenique sapphire oscillator presenting a flicker frequency noise floor below 2e-16 near 1,000 s of integration time and a long term Allan Deviation (ADEV) limited by a random walk process of 1e-18/sqr(tau). The frequency stability qualification at this level called for the implementation of sophisticated…
▽ More
We report in this letter the outstanding frequency stability performances of an autonomous cryogenique sapphire oscillator presenting a flicker frequency noise floor below 2e-16 near 1,000 s of integration time and a long term Allan Deviation (ADEV) limited by a random walk process of 1e-18/sqr(tau). The frequency stability qualification at this level called for the implementation of sophisticated instrumentation associated with ultra-stable frequency references and ad hoq averaging and correlation methods.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
The Statistics of the Cross-Spectrum and the Spectrum Average: Generalization to Multiple Instruments
Authors:
Antoine Baudiquez,
Éric Lantz,
Enrico Rubiola,
François Vernotte
Abstract:
This article addresses the measurement of the power spectrum of red noise processes at the lowest frequencies, where the minimum acquisition time is so long that it is impossible to average on a sequence of data record. Therefore, averaging is possible only on simultaneous observation of multiple instruments. This is the case of radio astronomy, which we take as the paradigm, but examples may be f…
▽ More
This article addresses the measurement of the power spectrum of red noise processes at the lowest frequencies, where the minimum acquisition time is so long that it is impossible to average on a sequence of data record. Therefore, averaging is possible only on simultaneous observation of multiple instruments. This is the case of radio astronomy, which we take as the paradigm, but examples may be found in other fields such as climatology and geodesy. We compare the Bayesian confidence interval of the red-noise parameter using two estimators, the spectrum average and the cross-spectrum. While the spectrum average is widely used, the cross-spectrum using multiple instruments is rather uncommon. With two instruments, the cross-spectrum estimator leads to the Variance-Gamma distribution. A generalization to $q$ devices is provided, with the example of the observation of millisecond pulsars with 5 radio telescopes.
△ Less
Submitted 28 February, 2022;
originally announced February 2022.
-
The Companion of Enrico's Chart for Phase Noise and Two-Sample Variances
Authors:
Enrico Rubiola,
Francois Vernotte
Abstract:
Phase noise and frequency (in)stability both describe the fluctuation of stable periodic signals, from somewhat different standpoints. Frequency is unique compared to other domains of metrology, in that its fluctuations of interest span at least 14 orders of magnitude, from $10^{-4}$ in a mechanical watch to $10^{-18}$ in atomic clocks. The frequency span of interest is some 12-15 orders of magnit…
▽ More
Phase noise and frequency (in)stability both describe the fluctuation of stable periodic signals, from somewhat different standpoints. Frequency is unique compared to other domains of metrology, in that its fluctuations of interest span at least 14 orders of magnitude, from $10^{-4}$ in a mechanical watch to $10^{-18}$ in atomic clocks. The frequency span of interest is some 12-15 orders of magnitude, from $μ$Hz to GHz Fourier frequency for phase noise, while the time span over which the fluctuations occur ranges from sub-$μ$s to years integration time for variances. Because this domain is ubiquitous in science and technology, a common language and tools suitable to the variety mentioned are a challenge.
This article is at once (1) a tutorial, (2) a review covering the most important facts about phase noise, frequency noise and two-sample (Allan and Allan-like) variances, and (3) a user guide to "Enrico's Chart of Phase Noise and Two-Sample Variances." In turn, the Chart is a reference card collecting the most useful concepts, formulas and plots in a single A4/A-size sheet, intended to be a staple on the desk of whoever works with these topics. The Chart is available under Creative Commons 4.0 CC-BY-NC-ND license from Zenodo, DOI 10.5281/zenodo.4399218. A wealth of auxiliary material is available for free on the Enrico's home page http://rubiola.org.
△ Less
Submitted 1 March, 2023; v1 submitted 18 January, 2022;
originally announced January 2022.
-
Applying clock comparison methods to pulsar timing observations
Authors:
Siyuan Chen,
Francois Vernotte,
Enrico Rubiola
Abstract:
Frequency metrology outperforms any other branch of metrology in accuracy (parts in $10^{-16}$) and small fluctuations ($<10^{-17}$). In turn, among celestial bodies, the rotation speed of millisecond pulsars (MSP) is by far the most stable ($<10^{-18}$). Therefore, the precise measurement of the time of arrival (TOA) of pulsar signals is expected to disclose information about cosmological phenome…
▽ More
Frequency metrology outperforms any other branch of metrology in accuracy (parts in $10^{-16}$) and small fluctuations ($<10^{-17}$). In turn, among celestial bodies, the rotation speed of millisecond pulsars (MSP) is by far the most stable ($<10^{-18}$). Therefore, the precise measurement of the time of arrival (TOA) of pulsar signals is expected to disclose information about cosmological phenomena, and to enlarge our astrophysical knowledge. Related to this topic, Pulsar Timing Array (PTA) projects have been developed and operated for the last decades. The TOAs from a pulsar can be affected by local emission and environmental effects, in the direction of the propagation through the interstellar medium or universally by gravitational waves from super massive black hole binaries. These effects (signals) can manifest as a low-frequency fluctuation over time, phenomenologically similar to a red noise. While the remaining pulsar intrinsic and instrumental background (noise) are white. This article focuses on the frequency metrology of pulsars. From our standpoint, the pulsar is an accurate clock, to be measured simultaneously with several telescopes in order to reject the uncorrelated white noise. We apply the modern statistical methods of time-and-frequency metrology to simulated pulsar data, and we show the detection limit of the correlated red noise signal between telescopes.
△ Less
Submitted 9 March, 2021; v1 submitted 3 November, 2020;
originally announced November 2020.
-
The spectrum decorrelation assumption for the cross-spectrum method
Authors:
François Vernotte,
Antoine Baudiquez,
Enrico Rubiola
Abstract:
This paper presents a very simple method ensuring the independence of consecutive spectra of the phase or frequency noise of an oscillator. This condition is essential for using cross-spectrum averages.
This paper presents a very simple method ensuring the independence of consecutive spectra of the phase or frequency noise of an oscillator. This condition is essential for using cross-spectrum averages.
△ Less
Submitted 9 October, 2020;
originally announced October 2020.
-
Response and Uncertainty of the Parabolic Variance PVAR to Non-Integer Exponents of the Power Law
Authors:
François Vernotte,
Siyuan Chen,
Enrico Rubiola
Abstract:
Oscillator fluctuations are described as the phase or frequency noise spectrum, or in terms of a wavelet variance as a function of the measurement time. The spectrum is generally approximated by the `power law,' i.e., a Laurent polynomial with integer exponents of the frequency. This article extends the domain of application of PVAR, a wavelet variance which uses the linear regression on phase dat…
▽ More
Oscillator fluctuations are described as the phase or frequency noise spectrum, or in terms of a wavelet variance as a function of the measurement time. The spectrum is generally approximated by the `power law,' i.e., a Laurent polynomial with integer exponents of the frequency. This article extends the domain of application of PVAR, a wavelet variance which uses the linear regression on phase data to estimate the frequency, and called `parabolic' because such regression is equivalent to a parabolic-shaped weight function applied to frequency fluctuations. In turn, PVAR is relevant in that it improves on the widely-used Modified Allan variance (MVAR) enabling the detection of the same noise processes at the same confidence level in a shorter measurement time. More specifically, we provide (i) the analytical expression of the response of the PVAR to the frequency-noise spectrum in the general case of non-integer exponents of the frequency, and (ii) a useful approximate expression of the statistical uncertainty.
△ Less
Submitted 2 March, 2021; v1 submitted 27 May, 2020;
originally announced May 2020.
-
Cross-Spectrum Measurement Statistics
Authors:
Antoine Baudiquez,
Éric Lantz,
Enrico Rubiola,
François Vernotte
Abstract:
The cross-spectrum method consists in measuring a signal $c(t)$ simultaneously with two independent instruments. Each of these instruments contributes to the global noise by its intrinsec (white) noise, whereas the signal $c(t)$ that we want to characterize could be a (red) noise. We first define the real part of the cross-spectrum as a relevant estimator. Then, we characterize the probability den…
▽ More
The cross-spectrum method consists in measuring a signal $c(t)$ simultaneously with two independent instruments. Each of these instruments contributes to the global noise by its intrinsec (white) noise, whereas the signal $c(t)$ that we want to characterize could be a (red) noise. We first define the real part of the cross-spectrum as a relevant estimator. Then, we characterize the probability density function (PDF) of this estimator knowing the noise level (direct problem) as a Variance-Gamma (V$Γ$) distribution. Next, we solve the "inverse problem" thanks to Bayes' theorem to obtain an upper limit of the noise level knowing the estimate. Checked by massive Monte Carlo simulations, V$Γ$ proves to be perfectly reliable to any number of degrees of freedom (dof). Finally we compare this method with an other method using the Karhunen-Loève transfrom (KLT). We find an upper limit of the signal level slightly different as the one of V$Γ$ since KLT better takes into account the available informations.
△ Less
Submitted 16 March, 2020;
originally announced March 2020.
-
KLTS: A rigorous method to compute the confidence intervals for the Three-Cornered Hat and for Groslambert Covariance
Authors:
Éric Lantz,
Claudio E. Calosso,
Enrico Rubiola,
Vincent Giordano,
Christophe Fluhr,
Benoît Dubois,
François Vernotte
Abstract:
The three-cornered hat / Groslambert Covariance methods are widely used to estimate the stability of each individual clock in a set of three, but no method gives reliable confidence intervals for large integration times.
We propose a new KLTS (Karhunen-Loève Tansform using Sufficient statistics) method which uses these estimators to take into account the statistics of all the measurements betwee…
▽ More
The three-cornered hat / Groslambert Covariance methods are widely used to estimate the stability of each individual clock in a set of three, but no method gives reliable confidence intervals for large integration times.
We propose a new KLTS (Karhunen-Loève Tansform using Sufficient statistics) method which uses these estimators to take into account the statistics of all the measurements between the pairs of clocks in a Bayesian way. The resulting Cumulative Density Function (CDF) yields confidence intervals for each clock AVAR. This CDF provides also a stability estimator which is always positive.
Checked by massive Monte-Carlo simulations, KLTS proves to be perfectly reliable even for one degree of freedom. An example of experimental measurement is given.
△ Less
Submitted 1 August, 2019; v1 submitted 11 April, 2019;
originally announced April 2019.
-
Three-Cornered Hat and Groslambert Covariance: A first attempt to assess the uncertainty domains
Authors:
François Vernotte,
Éric Lantz
Abstract:
The three-cornered hat method and the Groslambert Covariance are very often used to estimate the frequency stability of each individual oscillator in a set of three oscillators by comparing them in pairs. However, no rigorous method to assess the uncertainties over their estimates has yet been formulated. In order to overcome this lack, this paper will first study the direct problem, i.e. the calc…
▽ More
The three-cornered hat method and the Groslambert Covariance are very often used to estimate the frequency stability of each individual oscillator in a set of three oscillators by comparing them in pairs. However, no rigorous method to assess the uncertainties over their estimates has yet been formulated. In order to overcome this lack, this paper will first study the direct problem, i.e. the calculation of the statistics of the clock stability estimates by assuming known values of the true clock stabilities and then will propose a first attempt to solve the inverse problem, i.e. the assessment of a confidence interval over the true clock stabilities by assuming known values of the clock stability estimates. We show that this method is reliable from 5 Equivalent Degrees of Freedom (EDF) and beyond.
△ Less
Submitted 26 November, 2018; v1 submitted 2 October, 2018;
originally announced October 2018.
-
Frequency Stability Measurement of Cryogenic Sapphire Oscillators with a Multichannel Tracking DDS and the Two-Sample Covariance
Authors:
Claudio E. Calosso,
François Vernotte,
Vincent Giordano,
Christophe Fluhr Benoît Dubois,
Enrico Rubiolar
Abstract:
This article shows the first measurement of three 100 MHz signals exhibiting fluctuations from 2E-16 to parts in 1E-15 for integration time tau between 1 s and 1 day. Such stable signals are provided by three Cryogenic Sapphire Oscillators (CSOs) operating at about 10 GHz, also delivering the 100 MHz output via a dedicated synthesizer. The measurement is made possible by a 6-channel Tracking DDS (…
▽ More
This article shows the first measurement of three 100 MHz signals exhibiting fluctuations from 2E-16 to parts in 1E-15 for integration time tau between 1 s and 1 day. Such stable signals are provided by three Cryogenic Sapphire Oscillators (CSOs) operating at about 10 GHz, also delivering the 100 MHz output via a dedicated synthesizer. The measurement is made possible by a 6-channel Tracking DDS (TDDS) and the two-sample covariance tool, used to estimate the Allan variance. The use of two TDDS channels per CSO enables high rejection of the instrument background noise. The covariance outperforms the Three-Cornered Hat (TCH) method in that the background converges to zero "out of the box," with no need of the hypothesis that the instrument channels are equally noisy, nor of more sophisticated techniques to estimate the background noise of each channel. Thanks to correlation and averaging, the instrument background (AVAR) rolls off with a slope 1/sqrt(m), the number of measurements, down to 1E-18 tau = 1E4 s. For consistency check, we compare the results to the traditional TCH method beating the 10 GHz outputs down to the MHz region. Given the flexibility of the TDDS, our methods find immediate application to the measurement of the 250 MHz output of the FS combs.
△ Less
Submitted 29 August, 2018;
originally announced August 2018.
-
A study of ancient Khmer ephemerides
Authors:
François Vernotte,
Satyanad Kichenassamy
Abstract:
We study ancient Khmer ephemerides described in 1910 by the French engineer Faraut, in order to determine whether they rely on observations carried out in Cambodia. These ephemerides were found to be of Indian origin and have been adapted for another longitude, most likely in Burma. A method for estimating the date and place where the ephemerides were developed or adapted is described and applied.
We study ancient Khmer ephemerides described in 1910 by the French engineer Faraut, in order to determine whether they rely on observations carried out in Cambodia. These ephemerides were found to be of Indian origin and have been adapted for another longitude, most likely in Burma. A method for estimating the date and place where the ephemerides were developed or adapted is described and applied.
△ Less
Submitted 27 September, 2017;
originally announced September 2017.
-
Least square estimation of phase, frequency and PDEV
Authors:
Magnus Danielson,
Francois Vernotte,
Enrico Rubiola
Abstract:
The Omega-preprocessing was introduced to improve phase noise rejection by using a least square algorithm. The associated variance is the PVAR which is more efficient than MVAR to separate the different noise types. However, unlike AVAR and MVAR, the decimation of PVAR estimates for multi-tau analysis is not possible if each counter measurement is a single scalar. This paper gives a decimation rul…
▽ More
The Omega-preprocessing was introduced to improve phase noise rejection by using a least square algorithm. The associated variance is the PVAR which is more efficient than MVAR to separate the different noise types. However, unlike AVAR and MVAR, the decimation of PVAR estimates for multi-tau analysis is not possible if each counter measurement is a single scalar. This paper gives a decimation rule based on two scalars, the processing blocks, for each measurement. For the Omega-preprocessing, this implies the definition of an output standard as well as hardware requirements for performing high-speed computations of the blocks.
△ Less
Submitted 4 April, 2016;
originally announced April 2016.
-
The Omega Counter, a Frequency Counter Based on the Linear Regression
Authors:
E. Rubiola,
M. Lenczner,
P. -Y. Bourgeois,
F. Vernotte
Abstract:
This article introduces the Ω counter, a frequency counter -- or a frequency-to-digital converter, in a different jargon -- based on the Linear Regression (LR) algorithm on time stamps. We discuss the noise of the electronics. We derive the statistical properties of the Ω counter on rigorous mathematical basis, including the weighted measure and the frequency response. We describe an implementatio…
▽ More
This article introduces the Ω counter, a frequency counter -- or a frequency-to-digital converter, in a different jargon -- based on the Linear Regression (LR) algorithm on time stamps. We discuss the noise of the electronics. We derive the statistical properties of the Ω counter on rigorous mathematical basis, including the weighted measure and the frequency response. We describe an implementation based on a SoC, under test in our laboratory, and we compare the Ω counter to the traditional Π and Λ counters. The LR exhibits optimum rejection of white phase noise, superior to that of the Π and Λ counters. White noise is the major practical problem of wideband digital electronics, both in the instrument internal circuits and in the fast processes which we may want to measure. The Ω counter finds a natural application in the measurement of the Parabolic Variance, described in the companion article arXiv:1506.00687 [physics.data-an].
△ Less
Submitted 16 June, 2015;
originally announced June 2015.
-
Allan variance computed in space domain: Application to InSAR data to characterize noise and geophysical signal
Authors:
Olivier Cavalié,
François Vernotte
Abstract:
The Allan variance was introduced fifty years ago for analyzing the stability of frequency standards. Beside its metrological interest, it is also an estimator of the large trends of the power spectral density (PSD) of frequency deviation. For instance, the Allan variance is able to discriminate different types of noise characterized by different power laws in the PSD. But, it was also used in oth…
▽ More
The Allan variance was introduced fifty years ago for analyzing the stability of frequency standards. Beside its metrological interest, it is also an estimator of the large trends of the power spectral density (PSD) of frequency deviation. For instance, the Allan variance is able to discriminate different types of noise characterized by different power laws in the PSD. But, it was also used in other fields: accelerometry, geophysics, geodesy, astrophysics and even finances! However, it seems that up to now, it has been exclusively applied for time series analysis. We propose here to use the Allan variance onto spatial data.
Interferometric synthetic aperture radar (InSAR) is used in geophysics to image ground displacements in space (over the SAR image spatial coverage) and in time thank to the regular SAR image acquisitions by dedicated satellites. The main limitation of the technique is the atmospheric disturbances that affect the radar signal while traveling from the sensor to the ground and back. In this paper, we propose to use the Allan variance for analyzing spatial data from InSAR measurements. The Allan variance was computed in XY mode as well as in radial mode for detecting different types of behavior for different space-scales, in the same way as the different types of noise versus the integration time in the classical time and frequency application. We found that radial AVAR is the more appropriate way to have an estimator insensitive to the spatial axis and we applied it on SAR data acquired over eastern Turkey for the period 2003-2011. Space AVAR allowed to well characterize noise features, classically found in InSAR such as phase decorrelation producing white noise or atmospheric delays, behaving like a random walk signal. We finally applied the space AVAR to an InSAR time series to detect when the geophysical signal, here the ground motion, emerges from the noise.
△ Less
Submitted 3 June, 2015;
originally announced June 2015.
-
The Parabolic variance (PVAR), a wavelet variance based on least-square fit
Authors:
F. Vernotte,
M. Lenczner,
P. -Y. Bourgeois,
E. Rubiola
Abstract:
This article introduces the Parabolic Variance (PVAR), a wavelet variance similar to the Allan variance, based on the Linear Regression (LR) of phase data. The companion article arXiv:1506.05009 [physics.ins-det] details the $Ω$ frequency counter, which implements the LR estimate.
The PVAR combines the advantages of AVAR and MVAR. PVAR is good for long-term analysis because the wavelet spans ove…
▽ More
This article introduces the Parabolic Variance (PVAR), a wavelet variance similar to the Allan variance, based on the Linear Regression (LR) of phase data. The companion article arXiv:1506.05009 [physics.ins-det] details the $Ω$ frequency counter, which implements the LR estimate.
The PVAR combines the advantages of AVAR and MVAR. PVAR is good for long-term analysis because the wavelet spans over $2 τ$, the same of the AVAR wavelet; and good for short-term analysis because the response to white and flicker PM is $1/τ^3$ and $1/τ^2$, same as the MVAR.
After setting the theoretical framework, we study the degrees of freedom and the confidence interval for the most common noise types. Then, we focus on the detection of a weak noise process at the transition - or corner - where a faster process rolls off. This new perspective raises the question of which variance detects the weak process with the shortest data record. Our simulations show that PVAR is a fortunate tradeoff. PVAR is superior to MVAR in all cases, exhibits the best ability to divide between fast noise phenomena (up to flicker FM), and is almost as good as AVAR for the detection of random walk and drift.
△ Less
Submitted 27 October, 2015; v1 submitted 1 June, 2015;
originally announced June 2015.
-
Metrology and 1/f noise: linear regressions and confidence intervals in flicker noise context
Authors:
Francois Vernotte,
Eric Lantz
Abstract:
1/f noise is very common but is difficult to handle in a metrological way. After having recalled the main characteristics of stongly correlated noise, this paper will determine relationships giving confidence intervals over the arithmetic mean and the linear drift parameters. A complete example of processing of an actual measurement sequence affected by 1/f noise will be given.
1/f noise is very common but is difficult to handle in a metrological way. After having recalled the main characteristics of stongly correlated noise, this paper will determine relationships giving confidence intervals over the arithmetic mean and the linear drift parameters. A complete example of processing of an actual measurement sequence affected by 1/f noise will be given.
△ Less
Submitted 19 January, 2015; v1 submitted 29 July, 2014;
originally announced July 2014.
-
Can we define a best estimator in simple 1-D cases ?
Authors:
Eric Lantz,
Francois Vernotte
Abstract:
With a small number of measurements, the three most well known estimators of a single parameter give very different results when estimating a scale parameter. A transformation of this scale parameter to a location parameter by using logarithms of the data rends the three estimators equivalent in the absence of any a priori information.
With a small number of measurements, the three most well known estimators of a single parameter give very different results when estimating a scale parameter. A transformation of this scale parameter to a location parameter by using logarithms of the data rends the three estimators equivalent in the absence of any a priori information.
△ Less
Submitted 11 August, 2014; v1 submitted 18 December, 2012;
originally announced December 2012.
-
The cross-spectrum experimental method
Authors:
Enrico Rubiola,
Francois Vernotte
Abstract:
The noise of a device under test (DUT) is measured simultaneously with two instruments, each of which contributes its own background. The average cross power spectral density converges to the DUT power spectral density. This method enables the extraction of the DUT noise spectrum, even if it is significantly lower than the background. After a snapshot on practical experiments, we go through the…
▽ More
The noise of a device under test (DUT) is measured simultaneously with two instruments, each of which contributes its own background. The average cross power spectral density converges to the DUT power spectral density. This method enables the extraction of the DUT noise spectrum, even if it is significantly lower than the background. After a snapshot on practical experiments, we go through the statistical theory and the choice of the estimator. A few experimental techniques are described, with reference to phase noise and amplitude noise in RF/microwave systems and in photonic systems. The set of applications of this method is wide. The final section gives a short panorama on radioastronomy, radiometry, quantum optics, thermometry (fundamental and applied), semiconductor technology, metallurgy, etc. This report is intended as a tutorial, as opposed to a report on advanced research, yet addressed to a broad readership: technicians, practitioners, Ph.D. students, academics, and full-time scientists.
△ Less
Submitted 1 March, 2010;
originally announced March 2010.
-
Stability Variances: A filter Approach
Authors:
Alaa Makdissi,
François Vernotte,
Emeric De Clercq
Abstract:
We analyze the Allan Variance estimator as the combination of Discrete-Time linear filters. We apply this analysis to the different variants of the Allan variance: the Overlap** Allan Variance, the Modified Allan variance, the Hadamard Variance and the Overlap** Hadamard variance. Based on this analysis we present a new method to compute a new estimator of the Allan Variance and its variants…
▽ More
We analyze the Allan Variance estimator as the combination of Discrete-Time linear filters. We apply this analysis to the different variants of the Allan variance: the Overlap** Allan Variance, the Modified Allan variance, the Hadamard Variance and the Overlap** Hadamard variance. Based on this analysis we present a new method to compute a new estimator of the Allan Variance and its variants in the frequency domain. We show that the proposed frequency domain equations are equivalent to extending the data by periodization in the time domain. Like the Total Variance \cite{totvar}, which is based on extending the data manually in the time domain, our frequency domain variances estimators have better statistics than the estimators of the classical variances in the time domain. We demonstrate that the previous well-know equation that relates the Allan Variance to the Power Spectrum Density (PSD) of continuous-time signals is not valid for real world discrete-time measurements and we propose a new equation that relates the Allan Variance to the PSD of the discrete-time signals and that allows to compute the Allan variance and its different variants in the frequency domain .
△ Less
Submitted 17 April, 2009;
originally announced April 2009.
