Development and validation of a cryogenic far-infrared diffraction grating spectrometer used to post-disperse the output from a Fourier transform spectrometer
Authors:
Alicia M. Anderson,
David A. Naylor,
Brad G. Gom,
Matthew A. Buchan,
Adam J. Christiansen,
Ian T. Veenendaal
Abstract:
Recent advances in far-infrared detector technology have led to increases in raw sensitivity of more than an order of magnitude over previous state-of-the-art detectors. With such sensitivity, photon noise becomes the dominant noise component, even when using cryogenically cooled optics, unless a method of restricting the spectral bandpass is employed. The leading instrument concept features refle…
▽ More
Recent advances in far-infrared detector technology have led to increases in raw sensitivity of more than an order of magnitude over previous state-of-the-art detectors. With such sensitivity, photon noise becomes the dominant noise component, even when using cryogenically cooled optics, unless a method of restricting the spectral bandpass is employed. The leading instrument concept features reflecting diffraction gratings which post-disperse the light that has been modulated by a polarizing Fourier transform spectrometer (FTS) onto a detector array, thereby reducing the photon noise on each detector. This paper discusses the development of a cryogenic (4 K) diffraction grating spectrometer which operates over the wavelength range from 285 - 500 $μ$m and was used to post-disperse the output from a room-temperature polarizing FTS. Measurements of the grating spectral response and diffraction efficiency are presented as a function of both wavelength and polarization to characterize the instrumental performance.
△ Less
Submitted 30 January, 2024; v1 submitted 9 January, 2024;
originally announced January 2024.
Applying Energy Absorption Interferometry to THz direct detectors using photomixers
Authors:
Ian Veenendaal,
Edgar Castillo-Dominguez,
Stephen J. C. Yates,
Bram Lap,
Willem Jellema
Abstract:
Detector requirements for far infrared astronomy generally result in devices which exhibit a few-moded response to incident radiation. The sensitivity and spatial form of the individual modes to which such a detector is sensitive can be determined with knowledge of the complex valued cross-spectral density of the system, which we label the detector response function (DRF). A matrix representing th…
▽ More
Detector requirements for far infrared astronomy generally result in devices which exhibit a few-moded response to incident radiation. The sensitivity and spatial form of the individual modes to which such a detector is sensitive can be determined with knowledge of the complex valued cross-spectral density of the system, which we label the detector response function (DRF). A matrix representing the discretized cross-spectral density can be measured from the complex amplitudes of interference fringes generated by two identical sources as they are independently scanned through the field of view. We provide experimental verification of this technique using monochromatic THz beams generated by photomixers in which the relative phase is varied with fiber stretchers. We use this system to characterize the modal response of a single pixel from an array of microwave kinetic inductance detectors (MKIDs).
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
The Herschel Comprehensive (U)LIRG Emission Survey (HerCULES): CO Ladders, fine structure lines, and neutral gas cooling
Authors:
M. J. F. Rosenberg,
P. P. van der Werf,
S. Aalto,
L. Armus,
V. Charmandaris,
T. Díaz-Santos,
A. S. Evans,
J. Fischer,
Y. Gao,
E. González-Alfonso,
T. R. Greve,
A. I. Harris,
C. Henkel,
F. P. Israel,
K. G. Isaak,
C. Kramer,
R. Meijerink,
D. A. Naylor,
D. B. Sanders,
H. A. Smith,
M. Spaans,
L. Spinoglio,
G. J. Stacey,
I. Veenendaal,
S. Veilleux
, et al. (5 additional authors not shown)
Abstract:
(Ultra) Luminous Infrared Galaxies ((U)LIRGs) are objects characterized by their extreme infrared (8-1000 $μ$m) luminosities ($L_{LIRG}>10^{11} $L$_\odot$ and $L_{ULIRG}>10^{12}$ L$_\odot$). The Herschel Comprehensive ULIRG Emission Survey (HerCULES; PI van der Werf) presents a representative flux-limited sample of 29 (U)LIRGs that spans the full luminosity range of these objects (10…
▽ More
(Ultra) Luminous Infrared Galaxies ((U)LIRGs) are objects characterized by their extreme infrared (8-1000 $μ$m) luminosities ($L_{LIRG}>10^{11} $L$_\odot$ and $L_{ULIRG}>10^{12}$ L$_\odot$). The Herschel Comprehensive ULIRG Emission Survey (HerCULES; PI van der Werf) presents a representative flux-limited sample of 29 (U)LIRGs that spans the full luminosity range of these objects (10$^{11}\leq L_\odot \geq10^{13}$). With the \emph{Herschel Space Observatory}, we observe [CII] 157 $μ$m, [OI] 63 $μ$m, and [OI] 145 $μ$m line emission with PACS, CO J=4-3 through J=13-12, [CI] 370 $μ$m, and [CI] 609 $μ$m with SPIRE, and low-J CO transitions with ground-based telescopes. The CO ladders of the sample are separated into three classes based on their excitation level. In 13 of the galaxies, the [OI] 63 $μ$m emission line is self absorbed. Comparing the CO excitation to the IRAS 60/100 $μ$m ratio and to far infrared luminosity, we find that the CO excitation is more correlated to the far infrared colors. We present cooling budgets for the galaxies and find fine-structure line flux deficits in the [CII], [SiII], [OI], and [CI] lines in the objects with the highest far IR fluxes, but do not observe this for CO $4\leq J_{upp}\leq13$. In order to study the heating of the molecular gas, we present a combination of three diagnostic quantities to help determine the dominant heating source. Using the CO excitation, the CO J=1-0 linewidth, and the AGN contribution, we conclude that galaxies with large CO linewidths always have high-excitation CO ladders, and often low AGN contributions, suggesting that mechanical heating is important.
△ Less
Submitted 13 January, 2015;
originally announced January 2015.