Showing 1–50 of 123 results for author: Vazquez, M

Aligning Multiclass Neural Network Classifier Criterion with Task Performance via $F_β$-Score

Authors: Nathan Tsoi, Deyuan Li, Taesoo Daniel Lee, Marynel Vázquez

Abstract: Multiclass neural network classifiers are typically trained using cross-entropy loss. Following training, the performance of this same neural network is evaluated using an application-specific metric based on the multiclass confusion matrix, such as the Macro $F_β$-Score. It is questionable whether the use of cross-entropy will yield a classifier that aligns with the intended application-specific… ▽ More Multiclass neural network classifiers are typically trained using cross-entropy loss. Following training, the performance of this same neural network is evaluated using an application-specific metric based on the multiclass confusion matrix, such as the Macro $F_β$-Score. It is questionable whether the use of cross-entropy will yield a classifier that aligns with the intended application-specific performance criteria, particularly in scenarios where there is a need to emphasize one aspect of classifier performance. For example, if greater precision is preferred over recall, the $β$ value in the $F_β$ evaluation metric can be adjusted accordingly, but the cross-entropy objective remains unaware of this preference during training. We propose a method that addresses this training-evaluation gap for multiclass neural network classifiers such that users can train these models informed by the desired final $F_β$-Score. Following prior work in binary classification, we utilize the concepts of the soft-set confusion matrices and a piecewise-linear approximation of the Heaviside step function. Our method extends the $2 \times 2$ binary soft-set confusion matrix to a multiclass $d \times d$ confusion matrix and proposes dynamic adaptation of the threshold value $τ$, which parameterizes the piecewise-linear Heaviside approximation during run-time. We present a theoretical analysis that shows that our method can be used to optimize for a soft-set based approximation of Macro-$F_β$ that is a consistent estimator of Macro-$F_β$, and our extensive experiments show the practical effectiveness of our approach. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Optimización del sistema de iluminación y proyección para un sensor multiparamétrico acusto-óptico

Authors: Patricia María Elena Vázquez, Germán Eduardo Caro

Abstract: In previous works we presented a novel multiparametric sensor to simultaneously measure the refractive index and the speed of sound in a liquid by means of the acousto-optic effect. The sensor requires an illumination system that expands the laser beam so that it interacts effectively with the liquid under study. Also, a projection system is necessary in order to adequately capture the diffraction… ▽ More In previous works we presented a novel multiparametric sensor to simultaneously measure the refractive index and the speed of sound in a liquid by means of the acousto-optic effect. The sensor requires an illumination system that expands the laser beam so that it interacts effectively with the liquid under study. Also, a projection system is necessary in order to adequately capture the diffraction pattern at the cell exit. In this article, we present the optimization of the sensor illumination and projection system using the optical design computational tool Zemax OpticStudio. The considered range of refractive indices of the liquid samples is between 1.33 and 1.51. The results show a correct expansion of the incident beam on the cell, and the projection system achieves an image with very few aberrations and an adequate angular separation between the maxima of the diffraction pattern. Based on the resulting dimensions of the sensor after optimizing the illumination and projection system, we confirm that it is compact and portable. △ Less

Submitted 4 June, 2024; v1 submitted 28 May, 2024; originally announced May 2024.

Comments: In Spanish language

Open Datasets for Satellite Radio Resource Control

Authors: Husnain Shahid, Miguel Á. Vázquez, Musbah Shaat, Pol Henarejos, Nuria T Quijada, Enrique Marinu

Abstract: In Non-Terrestrial Networks (NTN), achieving effective radio resource allocation across multi-satellite system, encompassing efficient channel and bandwidth allocation, effective beam management, power control and interference mitigation, poses significant challenges due to the varying satellite links and highly dynamic nature of user traffic. This calls for the development of an intelligent decis… ▽ More In Non-Terrestrial Networks (NTN), achieving effective radio resource allocation across multi-satellite system, encompassing efficient channel and bandwidth allocation, effective beam management, power control and interference mitigation, poses significant challenges due to the varying satellite links and highly dynamic nature of user traffic. This calls for the development of an intelligent decision-making controller using Artificial Intelligence (AI) to efficiently manage resources in this complex environment. In this context, open datasets can play a crucial role in driving new advancement and facilitating research. Recognizing the significance, this paper aims to contribute the satellite communication research community by providing various open datasets that incorporate realistic traffic flow enabling a variety of uses cases. The primary objective of sharing these datasets is to facilitate the development and benchmarking of advanced resource management solutions, thereby improving the overall satellite communication systems. Furthermore, an application example focused on beam placement optimization via terminal clustering is provided. This assists in optimizing beam allocation task, enabling adaptive beamforming to effectively meet spatiotemporally varying user traffic demands and optimize resource utilization. △ Less

Submitted 22 April, 2024; originally announced April 2024.

Comments: 40th International Communication Satellite Systems Conference ICSSC, Bradford, UK, 24_26 October 2023

Emerging Advancements in 6G NTN Radio Access Technologies: An Overview

Authors: Husnain Shahid, Carla Amatetti, Riccardo Campana, Sorya Tong, Dorin Panaitopol, Alessandro Vanelli Coralli, Abdelhamed Mohamed, Chao Zhang, Ebraam Khalifa, Eduardo Medeiros, Estefania Recayte, Fatemeh Ghasemifard, Ji Lianghai, Juan Bucheli, Karthik Anantha Swamy, Marius Caus, Mehmet Gurelli, Miguel A. Vazquez, Musbah Shaat, Nathan Borios, Per-Erik Eriksson, Sebastian Euler, Zheng Li, Xiaotian Fu

Abstract: The efforts on the development, standardization and improvements to communication systems towards 5G Advanced and 6G are on track to provide benefits such as an unprecedented level of connectivity and performance, enabling a diverse range of vertical services. The full integration of non-terrestrial components into 6G plays a pivotal role in realizing this paradigm shift towards ubiquitous communi… ▽ More The efforts on the development, standardization and improvements to communication systems towards 5G Advanced and 6G are on track to provide benefits such as an unprecedented level of connectivity and performance, enabling a diverse range of vertical services. The full integration of non-terrestrial components into 6G plays a pivotal role in realizing this paradigm shift towards ubiquitous communication and global coverage. However, this integration into 6G brings forth a set of its own challenges, particularly in Radio Access Technologies (RATs). To this end, this paper comprehensively discusses those challenges at different levels of RATs and proposes the corresponding potential emerging advancements in the realm of 6G NTN. In particular, the focus is on advancing the prospective aspects of Radio Resource Management (RRM), spectral coexistence in terrestrial and non-terrestrial components and flexible waveform design solutions to combat the impediments. This discussion with a specific focus on emerging advancements in 6G NTN RATs is critical for sha** the next generation networks and potentially relevant in contributing the part in standardization in forthcoming releases △ Less

Submitted 22 April, 2024; originally announced April 2024.

Comments: accepted in 2024 EuCNC and 6G Summit, Antwerp, Belgium, 3_6 June 2024

Open Datasets for AI-Enabled Radio Resource Control in Non-Terrestrial Networks

Authors: Husnain Shahid, Miguel Angel Vazquez, Laurent Reynaud, Fanny Parzysz, Musbah Shaat

Abstract: By effectively implementing the strategies for resource allocation, the capabilities, and reliability of non-terrestrial networks (NTN) can be enhanced. This leads to enhance spectrum utilization performance while minimizing the unmet system capacity, meeting quality of service (QoS) requirements and overall system optimization. In turn, a wide range of applications and services in various domains… ▽ More By effectively implementing the strategies for resource allocation, the capabilities, and reliability of non-terrestrial networks (NTN) can be enhanced. This leads to enhance spectrum utilization performance while minimizing the unmet system capacity, meeting quality of service (QoS) requirements and overall system optimization. In turn, a wide range of applications and services in various domains can be supported. However, allocating resources in a multi-constellation system with heterogeneous satellite links and highly dynamic user traffic demand pose challenges in ensuring sufficient and fair resource distribution. To mitigate these complexities and minimize the overhead, there is a growing shift towards utilizing artificial intelligence (AI) for its ability to handle such problems effectively. This calls for the development of an intelligent decision-making controller using AI to efficiently manage resources in this complex environment. In this context, real-world open datasets play a pivotal role in the development of AI models addressing radio control optimization problems. As a matter of fact, acquiring suitable datasets can be arduous. Therefore, this paper identifies pertinent real-world open datasets representing realistic traffic pattern, network performances and demand for fixed and dynamic user terminals, enabling a variety of uses cases. The aim of gathering and publishing the information of these datasets are to inspire and assist the research community in crafting the advance resource management solutions. In a nutshell, this paper establishes a solid foundation of commercially accessible data, with the potential to set benchmarks and accelerate the resolution of resource allocation optimization challenges. △ Less

Submitted 19 April, 2024; originally announced April 2024.

Comments: In the proceedings of IEEE Future Networks World Forum 13_15 November 2023, Baltimore, MD, USA

Advancing aortic stenosis assessment: validation of fluid-structure interaction models against 4D flow MRI data

Authors: Alberto Zingaro, Irmantas Burba, David Oks, Mauro Fontana, Cristóbal Samaniego, Micha Bischofberger, Bart de Boeck, Andre Douverny, Özge Karakas, Stefan Toggweiler, Dabit Arzamendi-Aizpurua, Utku Gülan, Mariano Vázquez

Abstract: Systematic in vivo validations of computational models of the aortic valve remain scarce, despite successful validation against in vitro data. Utilizing a combination of computed tomography and 4D flow magnetic resonance imaging data, we developed patient-specific fluid-structure interaction models of the aortic valve immersed in the aorta for five patients in the pre-transcatheter aortic valve re… ▽ More Systematic in vivo validations of computational models of the aortic valve remain scarce, despite successful validation against in vitro data. Utilizing a combination of computed tomography and 4D flow magnetic resonance imaging data, we developed patient-specific fluid-structure interaction models of the aortic valve immersed in the aorta for five patients in the pre-transcatheter aortic valve replacement configuration. Incorporating also an in vitro setup of the valve, our computational models are subjected to rigorous validation against 4D flow measurements. Our results demonstrate the models' capacity to accurately replicate flow dynamics within established ranges of uncertainties mainly arising from 4D flow noise. In addition, we illustrate how computational models can serve as valuable cross-checks to reduce noise and erratic behaviour of in vivo data. This study represents a significant step towards integrating in silico technologies into real clinical contexts, providing a robust framework for improving aortic stenosis diagnosis and the design of next-generation aortic valve bioprostheses. △ Less

Submitted 12 April, 2024; originally announced April 2024.

Learning Human Preferences Over Robot Behavior as Soft Planning Constraints

Authors: Austin Narcomey, Nathan Tsoi, Ruta Desai, Marynel Vázquez

Abstract: Preference learning has long been studied in Human-Robot Interaction (HRI) in order to adapt robot behavior to specific user needs and desires. Typically, human preferences are modeled as a scalar function; however, such a formulation confounds critical considerations on how the robot should behave for a given task, with desired -- but not required -- robot behavior. In this work, we distinguish b… ▽ More Preference learning has long been studied in Human-Robot Interaction (HRI) in order to adapt robot behavior to specific user needs and desires. Typically, human preferences are modeled as a scalar function; however, such a formulation confounds critical considerations on how the robot should behave for a given task, with desired -- but not required -- robot behavior. In this work, we distinguish between such required and desired robot behavior by leveraging a planning framework. Specifically, we propose a novel problem formulation for preference learning in HRI where various types of human preferences are encoded as soft planning constraints. Then, we explore a data-driven method to enable a robot to infer preferences by querying users, which we instantiate in rearrangement tasks in the Habitat 2.0 simulator. We show that the proposed approach is promising at inferring three types of preferences even under varying levels of noise in simulated user choices between potential robot behaviors. Our contributions open up doors to adaptable planning-based robot behavior in the future. △ Less

Submitted 28 March, 2024; originally announced March 2024.

Optimisation of photodetectors design: comparison between Montecarlo and Genetic Algorithms

Authors: Patricia M. E. Vázquez, Ligia Ciocci Brazzano, Francisco E. Veiras, Patricio A. Sorichetti

Abstract: We present Montecarlo and Genetic Algorithm optimisations applied to the design of photodetectors based on a transimpedance amplifier and a photodiode. The circuit performance is evaluated with a merit function and the systematic search method is used as a reference. The design parameters are the feedback network components and the photodiode bias voltage. To evaluate the optimisations, we define… ▽ More We present Montecarlo and Genetic Algorithm optimisations applied to the design of photodetectors based on a transimpedance amplifier and a photodiode. The circuit performance is evaluated with a merit function and the systematic search method is used as a reference. The design parameters are the feedback network components and the photodiode bias voltage. To evaluate the optimisations, we define the relative difference between its merit and the optimum merit obtained by the systematic search. In both algorithms, the relative difference decreases with the number of evaluations, following a power law. The power-law exponent for the Genetic Algorithm is larger than that of Montecarlo (0.74 vs. 0.50). We conclude that both algorithms are advantageous compared to the systematic search method, and that the Genetic Algorithm shows a better performance than Montecarlo. △ Less

Submitted 21 March, 2024; originally announced March 2024.

Comments: 10 pages, 14 figures

Synthesizing extreme-ultraviolet vector beams in a chip

Authors: Riccardo Piccoli, Marco Bardellini, Stavroula Vovla, Linda Oberti, Kamal A. A. Abedin, Anna G. Ciriolo, Rebeca Martínez Vázquez, Roberto Osellame, Luca Poletto, Fabio Frassetto, Davide Faccialá, Michele Devetta, Caterina Vozzi, Salvatore Stagira

Abstract: Structured light has gained significant attention in recent years, especially in the generation and application of vector beams. These beams, characterized by a spatially varying polarization state, are a powerful tool to enhance our capacity to control light-matter interactions. In this study, we demonstrate the synthesis of extreme-ultraviolet (EUV) vector beams in a chip through high-order harm… ▽ More Structured light has gained significant attention in recent years, especially in the generation and application of vector beams. These beams, characterized by a spatially varying polarization state, are a powerful tool to enhance our capacity to control light-matter interactions. In this study, we demonstrate the synthesis of extreme-ultraviolet (EUV) vector beams in a chip through high-order harmonic generation (HHG). Our findings showcase the chip's ability to transfer the laser polarization state into the EUV beam despite the extended interaction length. This approach not only outperforms conventional free-space methods but also paves the way for a multitude of on-chip investigations in the realms of EUV and soft-X-ray spectroscopy. △ Less

Submitted 16 March, 2024; originally announced March 2024.

Validation of electrodeposited 241Am alpha-particle sources for use in liquified gas detectors at cryogenic temperatures

Authors: E. Calvo Alamillo, M. T. Crespo Vázquez, P. F. Rato Mendes, R. Álvarez Garrote, J. I. Crespo Anadón, C. Cuesta, A. De la Torre Rojo, I. Gil-Botella, I. Martín Martín, M. Mejuto Mendieta, C. Palomares, L. Pérez Molina, J. A. Soto Otón, A. Verdugo de Osa

Abstract: This paper describes a procedure for the validation of alpha-particle sources (exempt unsealed sources) to be used in experimental setups with liquefied gases at cryogenic temperatures (down to -196 C) and high vacuum. These setups are of interest for the development and characterization of neutrino and dark matter detectors based on liquid argon, among others. Due to the high purity requirements,… ▽ More This paper describes a procedure for the validation of alpha-particle sources (exempt unsealed sources) to be used in experimental setups with liquefied gases at cryogenic temperatures (down to -196 C) and high vacuum. These setups are of interest for the development and characterization of neutrino and dark matter detectors based on liquid argon, among others. Due to the high purity requirements, the sources have to withstand high vacuum and cryogenic temperatures for extended periods. The validation procedure has been applied to 241Am sources produced by electrodeposition. △ Less

Submitted 12 March, 2024; originally announced March 2024.

Comments: 5 pages

Journal ref: Applied Radiation and Isotopes, Volume 200, October 2023, 110913

Training Implicit Generative Models via an Invariant Statistical Loss

Authors: José Manuel de Frutos, Pablo M. Olmos, Manuel A. Vázquez, Joaquín Míguez

Abstract: Implicit generative models have the capability to learn arbitrary complex data distributions. On the downside, training requires telling apart real data from artificially-generated ones using adversarial discriminators, leading to unstable training and mode-drop** issues. As reported by Zahee et al. (2017), even in the one-dimensional (1D) case, training a generative adversarial network (GAN) is… ▽ More Implicit generative models have the capability to learn arbitrary complex data distributions. On the downside, training requires telling apart real data from artificially-generated ones using adversarial discriminators, leading to unstable training and mode-drop** issues. As reported by Zahee et al. (2017), even in the one-dimensional (1D) case, training a generative adversarial network (GAN) is challenging and often suboptimal. In this work, we develop a discriminator-free method for training one-dimensional (1D) generative implicit models and subsequently expand this method to accommodate multivariate cases. Our loss function is a discrepancy measure between a suitably chosen transformation of the model samples and a uniform distribution; hence, it is invariant with respect to the true distribution of the data. We first formulate our method for 1D random variables, providing an effective solution for approximate reparameterization of arbitrary complex distributions. Then, we consider the temporal setting (both univariate and multivariate), in which we model the conditional distribution of each sample given the history of the process. We demonstrate through numerical simulations that this new method yields promising results, successfully learning true distributions in a variety of scenarios and mitigating some of the well-known problems that state-of-the-art implicit methods present. △ Less

Submitted 26 February, 2024; originally announced February 2024.

Comments: Proceedings of the 27th International Conference on Artificial Intelligence and Statistics (AISTATS) 2024

REACT: Two Datasets for Analyzing Both Human Reactions and Evaluative Feedback to Robots Over Time

Authors: Kate Candon, Nicholas C. Georgiou, Helen Zhou, Sidney Richardson, Qi** Zhang, Brian Scassellati, Marynel Vázquez

Abstract: Recent work in Human-Robot Interaction (HRI) has shown that robots can leverage implicit communicative signals from users to understand how they are being perceived during interactions. For example, these signals can be gaze patterns, facial expressions, or body motions that reflect internal human states. To facilitate future research in this direction, we contribute the REACT database, a collecti… ▽ More Recent work in Human-Robot Interaction (HRI) has shown that robots can leverage implicit communicative signals from users to understand how they are being perceived during interactions. For example, these signals can be gaze patterns, facial expressions, or body motions that reflect internal human states. To facilitate future research in this direction, we contribute the REACT database, a collection of two datasets of human-robot interactions that display users' natural reactions to robots during a collaborative game and a photography scenario. Further, we analyze the datasets to show that interaction history is an important factor that can influence human reactions to robots. As a result, we believe that future models for interpreting implicit feedback in HRI should explicitly account for this history. REACT opens up doors to this possibility in the future. △ Less

Submitted 31 January, 2024; originally announced February 2024.

Recursos lexicográficos electrónicos multilingües y plurilingües: definición y clasificación tipológico-descriptiva

Authors: María José Domínguez Vázquez

Abstract: The aim of this paper is to provide a classification of multilingual and plurilingual electronic lexicographic resources which would enable, one the one hand, the implementation of quantitative and qualitative criteria to produce a typological taxonomy of lexicographical tools, such as dictionaries, as opposed to platforms and websites and, on the other, the distinction of multilingual and plurili… ▽ More The aim of this paper is to provide a classification of multilingual and plurilingual electronic lexicographic resources which would enable, one the one hand, the implementation of quantitative and qualitative criteria to produce a typological taxonomy of lexicographical tools, such as dictionaries, as opposed to platforms and websites and, on the other, the distinction of multilingual and plurilingual resources in terms of their larger or lesser prototy** degree. In addition to offering a thorough description of the different resources, this paper also puts forward some parameters and typological proposals to define and demarcate a number of electronic resources, particularly multilingual dictionaries and portals, while also outlining, and even questioning, the object of study of multilingual and plurilingual lexicography. △ Less

Submitted 26 December, 2023; originally announced December 2023.

Comments: 25 pages, in Spanish language

Journal ref: Revista Internacional de Lenguas Extranjeras, 10, 2019

Zur Darstellung eines mehrstufigen Prototypbegriffs in der multilingualen automatischen Sprachgenerierung: vom Korpus über word embeddings bis hin zum automatischen Wörterbuch

Authors: María José Domínguez Vázquez

Abstract: The multilingual dictionary of noun valency Portlex is considered to be the trigger for the creation of the automatic language generators Xera and Combinatoria, whose development and use is presented in this paper. Both prototypes are used for the automatic generation of nominal phrases with their mono- and bi-argumental valence slots, which could be used, among others, as dictionary examples or a… ▽ More The multilingual dictionary of noun valency Portlex is considered to be the trigger for the creation of the automatic language generators Xera and Combinatoria, whose development and use is presented in this paper. Both prototypes are used for the automatic generation of nominal phrases with their mono- and bi-argumental valence slots, which could be used, among others, as dictionary examples or as integrated components of future autonomous E-Learning-Tools. As samples for new types of automatic valency dictionaries including user interaction, we consider the language generators as we know them today. In the specific methodological procedure for the development of the language generators, the syntactic-semantic description of the noun slots turns out to be the main focus from a syntagmatic and paradigmatic point of view. Along with factors such as representativeness, grammatical correctness, semantic coherence, frequency and the variety of lexical candidates, as well as semantic classes and argument structures, which are fixed components of both resources, a concept of a multi-sided prototype stands out. The combined application of this prototype concept as well as of word embeddings together with techniques from the field of automatic natural language processing and generation (NLP and NLG) opens up a new way for the future development of automatically generated plurilingual valency dictionaries. All things considered, the paper depicts the language generators both from the point of view of their development as well as from that of the users. The focus lies on the role of the prototype concept within the development of the resources. △ Less

Submitted 26 December, 2023; originally announced December 2023.

Comments: 31 pages, in German language

Journal ref: Lexikos 31 (AFRILEX-reeks/series 31: 2021):

Contribución de la semántica combinatoria al desarrollo de herramientas digitales multilingües

Authors: María José Domínguez Vázquez

Abstract: This paper describes how the field of Combinatorial Semantics has contributed to the design of three prototypes for the automatic generation of argument patterns in nominal phrases in Spanish, French and German (Xera, Combinatoria and CombiContext). It also shows the importance of knowing about the argument syntactic-semantic interface in a production situation in the context of foreign languages.… ▽ More This paper describes how the field of Combinatorial Semantics has contributed to the design of three prototypes for the automatic generation of argument patterns in nominal phrases in Spanish, French and German (Xera, Combinatoria and CombiContext). It also shows the importance of knowing about the argument syntactic-semantic interface in a production situation in the context of foreign languages. After a descriptive section on the design, typologie and information levels of the resources, there follows an explanation of the central role of the combinatorial meaning (roles and ontological features). The study deals with different semantic f ilters applied in the selection, organization and expansion of the lexicon, being these key pieces for the generation of grammatically correct and semantically acceptable mono- and biargumental nominal phrases. △ Less

Submitted 26 December, 2023; originally announced December 2023.

Comments: 18 pages, in Spanish language. Círculo de lingüística aplicada a la comunicación, 2022

Insights to Molecular and Bulk Mechanical Properties of Glassy Carbon Through Molecular Dynamics Simulation and Mechanical Tensile Testing

Authors: Manali Kuntea, Lucía Carballo Chanfóna, Surabhi Nimbalkara, James Bunnell, Emanuel Rodriguez Barajasa, Mario Enrique Vazquez, David Trejo-Rodriguez, Carter Faucher, Skelly Smitha, Sam Kassegne

Abstract: With increasing interest in the use of glassy carbon (GC) for a wide variety of application areas, the need for develo** fundamental understanding of its mechanical properties has come to the forefront. Further, recent theoretical and modeling works that shed some light on the synthesis of GC through the process of pyrolysis of polymer precursors have highlighted the possibilities of a revisit t… ▽ More With increasing interest in the use of glassy carbon (GC) for a wide variety of application areas, the need for develo** fundamental understanding of its mechanical properties has come to the forefront. Further, recent theoretical and modeling works that shed some light on the synthesis of GC through the process of pyrolysis of polymer precursors have highlighted the possibilities of a revisit to investigation of its mechanical properties at a fundamental level. While there are isolated reports on the experimental determination of its elastic modulus, insights into stress-strain behavior of GC material under tension and compression obtained through simulation, either at molecular level or for the bulk material is missing. This current study fills the gap at the molecular level and investigates the mechanical properties of GC using molecular dynamics (MD) simulations which model the atomistic level formation and breaking of bonds using bond-order based reactive force field formulations. The molecular model considered for this simulation has a characteristics 3D cagey structure of 5-, 6-, and 7-membered carbon rings and graphitic domain of a flat graphene-like structure. The GC molecular model was subjected to loading under varying strain rates (0.4/ns, 0.6/ns, 1.25/ns, and 2.5/ns) and varying temperatures (300 - 800 K) in each of the three axes x, y, and z. The simulation showed that GC molecule has distinct stress-strain curves under tension and compression. In tension, MD modeling predicted mean elastic modulus of 5.71 GPa for a single GC molecule with some dependency on strain rates and temperature, while in compression, the elastic modulus was also found to depend on the strain rates as well as temperature and was predicted to have a mean value of 35 GPa △ Less

Submitted 4 December, 2023; originally announced December 2023.

Cosmic-ray searches with the MATHUSLA detector

Authors: Cristiano Alpigiani, J. C. Arteaga-Velázquez, Daniela Blanco-Lira, Davide Boscherini, K. S. Caballero-Mora, Paolo Camarri, Roberto Cardarelli, Dennis Cazar Ramírez, Giuseppe Di Sciascio, Arturo Fernández Téllez, H. J. Lubatti, O. G. Morales-Olivares, Piter Amador Paye Mamani, David Rivera Rangel, Mario Rodríguez-Cahuantzi, Rinaldo Santonico, Martin Alfonso Subieta Vázquez

Abstract: The performance of the proposed MATHUSLA detector as an instrument for studying the physics of cosmic rays by measuring extensive air showers is presented. The MATHUSLA detector is designed to observe and study the decay of long-lived particles produced at the pp interaction point of the CMS detector at CERN during the HL-LHC data-taking period. The proposed MATHUSLA detector will be composed of m… ▽ More The performance of the proposed MATHUSLA detector as an instrument for studying the physics of cosmic rays by measuring extensive air showers is presented. The MATHUSLA detector is designed to observe and study the decay of long-lived particles produced at the pp interaction point of the CMS detector at CERN during the HL-LHC data-taking period. The proposed MATHUSLA detector will be composed of many layers of long scintillating bars that cannot measure more than one hit per bar and correctly report the hit coordinate in case of multiple hits. This study shows that adding a layer of RPC detectors with both analogue and digital readout significantly enhances the capabilities of MATHUSLA to measure the local densities and arrival times of charged particles at the front of air showers. We discuss open issues in cosmic-ray physics that the proposed MATHUSLA detector with an additional layer of RPC detectors could address and conclude by comparing with other air-shower facilities that measure cosmic rays in the PeV energy range. △ Less

Submitted 13 November, 2023; originally announced November 2023.

Comments: 64 pages, 58 figures

From 5G to 6G: Revolutionizing Satellite Networks through TRANTOR Foundation

Authors: Pol Henarejos, Xavier Artiga, Miguel A. Vázquez, Màrius Caus, Musbah Shaat, Joan Bas, Lluís Blanco, Ana I. Pérez-Neira

Abstract: 5G technology will drastically change the way satellite internet providers deliver services by offering higher data speeds, massive network capacity, reduced latency, improved reliability and increased availability. A standardised 5G ecosystem will enable adapting 5G to satellite needs. The EU-funded TRANTOR project will seek to develop novel and secure satellite network management solutions that… ▽ More 5G technology will drastically change the way satellite internet providers deliver services by offering higher data speeds, massive network capacity, reduced latency, improved reliability and increased availability. A standardised 5G ecosystem will enable adapting 5G to satellite needs. The EU-funded TRANTOR project will seek to develop novel and secure satellite network management solutions that allow scaling up heterogeneous satellite traffic demands and capacities in a cost-effective and highly dynamic way. Researchers also target the development of flexible 6G non-terrestrial access architectures. The focus will be on the design of a multi-orbit and multi-band antenna for satellite user equipment (UE), as well as the development of gNodeB (gNB) and UE 5G non-terrestrial network equipment to support multi-connectivity. △ Less

Submitted 2 November, 2023; originally announced November 2023.

Towards Inferring Users' Impressions of Robot Performance in Navigation Scenarios

Authors: Qi** Zhang, Nathan Tsoi, Booyeon Choi, Jie Tan, Hao-Tien Lewis Chiang, Marynel Vázquez

Abstract: Human impressions of robot performance are often measured through surveys. As a more scalable and cost-effective alternative, we study the possibility of predicting people's impressions of robot behavior using non-verbal behavioral cues and machine learning techniques. To this end, we first contribute the SEAN TOGETHER Dataset consisting of observations of an interaction between a person and a mob… ▽ More Human impressions of robot performance are often measured through surveys. As a more scalable and cost-effective alternative, we study the possibility of predicting people's impressions of robot behavior using non-verbal behavioral cues and machine learning techniques. To this end, we first contribute the SEAN TOGETHER Dataset consisting of observations of an interaction between a person and a mobile robot in a Virtual Reality simulation, together with impressions of robot performance provided by users on a 5-point scale. Second, we contribute analyses of how well humans and supervised learning techniques can predict perceived robot performance based on different combinations of observation types (e.g., facial, spatial, and map features). Our results show that facial expressions alone provide useful information about human impressions of robot performance; but in the navigation scenarios we tested, spatial features are the most critical piece of information for this inference task. Also, when evaluating results as binary classification (rather than multiclass classification), the F1-Score of human predictions and machine learning models more than doubles, showing that both are better at telling the directionality of robot performance than predicting exact performance ratings. Based on our findings, we provide guidelines for implementing these predictions models in real-world navigation scenarios. △ Less

Submitted 17 October, 2023; originally announced October 2023.

Realistic pedestrian behaviour in the CARLA simulator using VR and mocap

Authors: Sergio Martín Serrano, David Fernández Llorca, Iván García Daza, Miguel Ángel Sotelo Vázquez

Abstract: Simulations are gaining increasingly significance in the field of autonomous driving due to the demand for rapid prototy** and extensive testing. Employing physics-based simulation brings several benefits at an affordable cost, while mitigating potential risks to prototypes, drivers, and vulnerable road users. However, there exit two primary limitations. Firstly, the reality gap which refers to… ▽ More Simulations are gaining increasingly significance in the field of autonomous driving due to the demand for rapid prototy** and extensive testing. Employing physics-based simulation brings several benefits at an affordable cost, while mitigating potential risks to prototypes, drivers, and vulnerable road users. However, there exit two primary limitations. Firstly, the reality gap which refers to the disparity between reality and simulation and prevents the simulated autonomous driving systems from having the same performance in the real world. Secondly, the lack of empirical understanding regarding the behavior of real agents, such as backup drivers or passengers, as well as other road users such as vehicles, pedestrians, or cyclists. Agent simulation is commonly implemented through deterministic or randomized probabilistic pre-programmed models, or generated from real-world data; but it fails to accurately represent the behaviors adopted by real agents while interacting within a specific simulated scenario. This paper extends the description of our proposed framework to enable real-time interaction between real agents and simulated environments, by means immersive virtual reality and human motion capture systems within the CARLA simulator for autonomous driving. We have designed a set of usability examples that allow the analysis of the interactions between real pedestrians and simulated autonomous vehicles and we provide a first measure of the user's sensation of presence in the virtual environment. △ Less

Submitted 8 September, 2023; originally announced September 2023.

Comments: This is a pre-print of the following work: Communications in Computer and Information Science (CCIS, volume 1882), 2023, Computer-Human Interaction Research and Applications reproduced with permission of Springer Nature. The final authenticated version is available online at: https://link.springer.com/chapter/10.1007/978-3-031-41962-1_5. arXiv admin note: substantial text overlap with arXiv:2206.00337

Principles and Guidelines for Evaluating Social Robot Navigation Algorithms

Authors: Anthony Francis, Claudia Pérez-D'Arpino, Chengshu Li, Fei Xia, Alexandre Alahi, Rachid Alami, Aniket Bera, Abhijat Biswas, Joydeep Biswas, Rohan Chandra, Hao-Tien Lewis Chiang, Michael Everett, Sehoon Ha, Justin Hart, Jonathan P. How, Haresh Karnan, Tsang-Wei Edward Lee, Luis J. Manso, Reuth Mirksy, Sören Pirk, Phani Teja Singamaneni, Peter Stone, Ada V. Taylor, Peter Trautman, Nathan Tsoi , et al. (6 additional authors not shown)

Abstract: A major challenge to deploying robots widely is navigation in human-populated environments, commonly referred to as social robot navigation. While the field of social navigation has advanced tremendously in recent years, the fair evaluation of algorithms that tackle social navigation remains hard because it involves not just robotic agents moving in static environments but also dynamic human agent… ▽ More A major challenge to deploying robots widely is navigation in human-populated environments, commonly referred to as social robot navigation. While the field of social navigation has advanced tremendously in recent years, the fair evaluation of algorithms that tackle social navigation remains hard because it involves not just robotic agents moving in static environments but also dynamic human agents and their perceptions of the appropriateness of robot behavior. In contrast, clear, repeatable, and accessible benchmarks have accelerated progress in fields like computer vision, natural language processing and traditional robot navigation by enabling researchers to fairly compare algorithms, revealing limitations of existing solutions and illuminating promising new directions. We believe the same approach can benefit social navigation. In this paper, we pave the road towards common, widely accessible, and repeatable benchmarking criteria to evaluate social robot navigation. Our contributions include (a) a definition of a socially navigating robot as one that respects the principles of safety, comfort, legibility, politeness, social competency, agent understanding, proactivity, and responsiveness to context, (b) guidelines for the use of metrics, development of scenarios, benchmarks, datasets, and simulators to evaluate social navigation, and (c) a design of a social navigation metrics framework to make it easier to compare results from different simulators, robots and datasets. △ Less

Submitted 19 September, 2023; v1 submitted 29 June, 2023; originally announced June 2023.

Comments: 42 pages, 11 figures, 6 tables

ACM Class: I.2.9

Artificial Intelligence for Satellite Communication and Non-Terrestrial Networks: A Survey

Authors: G. Fontanesi, F. Ortíz, E. Lagunas, V. Monzon Baeza, M. Á. Vázquez, J. A. Vásquez-Peralvo, M. Minardi, H. N. Vu, P. J. Honnaiah, C. Lacoste, Y. Drif, T. S. Abdu, G. Eappen, J. Rehman, L. M. Garcés-Socorrás, W. A. Martins, P. Henarejos, H. Al-Hraishawi, J. C. Merlano Duncan, T. X. Vu, S. Chatzinotas

Abstract: This paper surveys the application and development of Artificial Intelligence (AI) in Satellite Communication (SatCom) and Non-Terrestrial Networks (NTN). We first present a comprehensive list of use cases, the relative challenges and the main AI tools capable of addressing those challenges. For each use case, we present the main motivation, a system description, the available non-AI solutions and… ▽ More This paper surveys the application and development of Artificial Intelligence (AI) in Satellite Communication (SatCom) and Non-Terrestrial Networks (NTN). We first present a comprehensive list of use cases, the relative challenges and the main AI tools capable of addressing those challenges. For each use case, we present the main motivation, a system description, the available non-AI solutions and the potential benefits and available works using AI. We also discuss the pros and cons of an on-board and on-ground AI-based architecture, and we revise the current commercial and research activities relevant to this topic. Next, we describe the state-of-the-art hardware solutions for develo** ML in real satellite systems. Finally, we discuss the long-term developments of AI in the SatCom and NTN sectors and potential research directions. This paper provides a comprehensive and up-to-date overview of the opportunities and challenges offered by AI to improve the performance and efficiency of NTNs. △ Less

Submitted 25 April, 2023; originally announced April 2023.

Shutter, the Robot Photographer: Leveraging Behavior Trees for Public, In-the-Wild Human-Robot Interactions

Authors: Alexander Lew, Sydney Thompson, Nathan Tsoi, Marynel Vázquez

Abstract: Deploying interactive systems in-the-wild requires adaptability to situations not encountered in lab environments. Our work details our experience about the impact of architecture choice on behavior reusability and reactivity while deploying a public interactive system. In particular, we introduce Shutter, a robot photographer and a platform for public interaction. In designing Shutter's architect… ▽ More Deploying interactive systems in-the-wild requires adaptability to situations not encountered in lab environments. Our work details our experience about the impact of architecture choice on behavior reusability and reactivity while deploying a public interactive system. In particular, we introduce Shutter, a robot photographer and a platform for public interaction. In designing Shutter's architecture, we focused on adaptability for in-the-wild deployment, while develo** a reusable platform to facilitate future research in public human-robot interaction. We find that behavior trees allow reactivity, especially in group settings, and encourage designing reusable behaviors. △ Less

Submitted 31 January, 2023; originally announced February 2023.

Comments: Submitted to the 2022 Human-Robot Interaction in Public Spaces workshop: https://sites.google.com/view/hripublicspaces2022

Application of the partial Dirichlet-Neumann contact algorithm to simulate low-velocity impact events on composite structures

Authors: G. Guillamet, A. Quintanas-Corominas, M. Rivero, G. Houzeuax, M. Vázquez, A. Turon

Abstract: Impact simulations for damage resistance analysis are computationally intensive due to contact algorithms and advanced damage models. Both methods, which are the main ingredients in an impact event, require refined meshes at the contact zone to obtain accurate predictions of the contact force and damage onset and propagation through the material. This work presents the application of the partial D… ▽ More Impact simulations for damage resistance analysis are computationally intensive due to contact algorithms and advanced damage models. Both methods, which are the main ingredients in an impact event, require refined meshes at the contact zone to obtain accurate predictions of the contact force and damage onset and propagation through the material. This work presents the application of the partial Dirichlet-Neumann contact algorithm to simulate low-velocity impact problems on composite structures using High-Performance Computing. This algorithm is devised for parallel finite element codes running on supercomputers, and it is extended to explicit time integration schemes to solve impact problems including damage. The proposed framework is validated with a standard test for damage resistance on fiber-reinforced polymer matrix composites. Moreover, the parallel performance of the proposed algorithm has been evaluated in a mesh of 74M of elements running with 2400 processors. △ Less

Submitted 16 January, 2023; v1 submitted 11 January, 2023; originally announced January 2023.

Comments: 30 pages, 11 figures, journal

MSC Class: 74M15; 74M20; 74F99; 74S05; 65Y05; ACM Class: J.2; I.6.3

Satellite edge computing for real-time and very-high resolution Earth observation

Authors: Israel Leyva-Mayorga, Marc M. Gost, Marco Moretti, Ana Pérez-Neira, Miguel Ángel Vázquez, Petar Popovski, Beatriz Soret

Abstract: In real-time and high-resolution Earth observation imagery, Low Earth Orbit (LEO) satellites capture images that are subsequently transmitted to ground to create an updated map of an area of interest. Such maps provide valuable information for meteorology or environmental monitoring, but can also be employed in near-real time operation for disaster detection, identification, and management. Howeve… ▽ More In real-time and high-resolution Earth observation imagery, Low Earth Orbit (LEO) satellites capture images that are subsequently transmitted to ground to create an updated map of an area of interest. Such maps provide valuable information for meteorology or environmental monitoring, but can also be employed in near-real time operation for disaster detection, identification, and management. However, the amount of data generated by these applications can easily exceed the communication capabilities of LEO satellites, leading to congestion and packet drop**. To avoid these problems, the Inter-Satellite Links (ISLs) can be used to distribute the data among the satellites for processing. In this paper, we address an energy minimization problem based on a general satellite mobile edge computing (SMEC) framework for real-time and very-high resolution Earth observation. Our results illustrate that the optimal allocation of data and selection of the compression parameters increase the amount of images that the system can support by a factor of 12 when compared to directly downloading the data. Further, energy savings greater than 11% were observed in a real-life scenario of imaging a volcanic island, while a sensitivity analysis of the image acquisition process demonstrates that potential energy savings can be as high as 92%. △ Less

Submitted 16 July, 2023; v1 submitted 25 December, 2022; originally announced December 2022.

Comments: To be published in IEEE Transactions on Communications

Domain Wall Propagation and Pinning Induced by Current Pulses in Cylindrical Modulated Nanowires

Authors: C. Bran, J. A. Fernandez-Roldan, J. A. Moreno, A. Fraile Rodríguez, R. P. del Real, A. Asenjo, E. Saugar, J. Marqués-Marchán, H. Mohammed, M. Foerster, L. Aballe, J. Kosel, M. Vazquez, O. Chubykalo-Fesenko

Abstract: The future developments of three-dimensional magnetic nanotechnology require the control of domain wall dynamics by means of current pulses. While this has been extensively studied in planar magnetic strips (planar nanowires), few reports exist in cylindrical geometry, where Bloch point domain walls are expected to have intriguing properties. Here we report this investigation in cylindrical magnet… ▽ More The future developments of three-dimensional magnetic nanotechnology require the control of domain wall dynamics by means of current pulses. While this has been extensively studied in planar magnetic strips (planar nanowires), few reports exist in cylindrical geometry, where Bloch point domain walls are expected to have intriguing properties. Here we report this investigation in cylindrical magnetic Ni nanowires with geometrical notches. Experimental work based on synchrotron X-ray magnetic circular dichroism (XMCD) combined with photoemission electron microscopy (PEEM) indicates that large current densities induce domain wall nucleation while smaller currents move domain walls preferably against the current direction. In the region where no pinning centers are present we found domain wall velocity of about 1 km/s. The domain wall motion along current was also detected in the vicinity of the notch region. Pinning of domain walls has been observed not only at geometrical constrictions but also outside of them. Thermal modelling indicates that large current densities temporarily raise the temperature in the nanowire above the Curie temperature leading to nucleation of domain walls during the system cooling. Micromagnetic modelling with spin-torque effect shows that for intermediate current densities Bloch point domain walls with chirality parallel to the Oersted field propagate antiparallel to the current direction. In other cases, domain walls can be bounced from the notches and/or get pinned outside their positions. We thus find that current is not only responsible for the domain wall propagation but is also a source of pinning due to the Oersted field action. △ Less

Submitted 4 October, 2022; originally announced October 2022.

A parallel algorithm for unilateral contact problems

Authors: G. Guillamet, M. Rivero, M. Zavala-Aké, M. Vázquez, G. Houzeaux, S. Oller

Abstract: In this paper, we introduce a novel parallel contact algorithm designed to run efficiently in High-Performance Computing based supercomputers. Particular emphasis is put on its computational implementation in a multiphysics finite element code. The algorithm is based on the method of partial Dirichlet-Neumann boundary conditions and is capable to solve numerically a nonlinear contact problem betwe… ▽ More In this paper, we introduce a novel parallel contact algorithm designed to run efficiently in High-Performance Computing based supercomputers. Particular emphasis is put on its computational implementation in a multiphysics finite element code. The algorithm is based on the method of partial Dirichlet-Neumann boundary conditions and is capable to solve numerically a nonlinear contact problem between rigid and deformable bodies in a whole parallel framework. Its distinctive characteristic is that the contact is tackled as a coupled problem, in which the contacting bodies are treated separately, in a staggered way. Then, the coupling is performed through the exchange of boundary conditions at the contact interface following a Gauss-Seidel strategy. To validate this algorithm we conducted several benchmark tests by comparing the proposed solution against theoretical and other numerical solutions. Finally, we evaluated the parallel performance of the proposed algorithm in a real impact test to show its capabilities for large-scale applications. △ Less

Submitted 1 August, 2022; v1 submitted 27 July, 2022; originally announced July 2022.

Comments: 26 pages, 23 figures

MSC Class: 74M15; 74M20; 74F99; 74S05; 65Y05; ACM Class: J.2; I.6.3

Journal ref: Computers & Structures, Volume 271 (2022) 106862

Efficient Coherent XUV Generation and Manipulation in Microfluidic Glass Devices

Authors: Anna Gabriella Ciriolo, Rebeca Martínez Vázquez, Gabriele Crippa, Michele Devetta, Davide Faccialà, Pasquale Barbato, Fabio Frassetto, Matteo Negro, Federico Bariselli, Luca Poletto, Valer Tosa, Aldo Frezzotti, Caterina Vozzi, Roberto Osellame, Salvatore Stagira

Abstract: The development of compact and bright XUV and soft X-ray sources based on high-order harmonic generation is boosting advances towards understanding the behavior of matter with extreme temporal and spatial resolutions. Here, we report efficient XUV generation inside microfluidic devices fabricated by femtosecond laser irradiation followed by chemical etching. Our microfluidic approach allows one to… ▽ More The development of compact and bright XUV and soft X-ray sources based on high-order harmonic generation is boosting advances towards understanding the behavior of matter with extreme temporal and spatial resolutions. Here, we report efficient XUV generation inside microfluidic devices fabricated by femtosecond laser irradiation followed by chemical etching. Our microfluidic approach allows one to control and manipulate the generation conditions in gas on a micro-meter scale with unprecedented flexibility, thus enabling a high photon-flux and broadband harmonics spectra up to 200 eV. △ Less

Submitted 22 June, 2022; originally announced June 2022.

Entanglement statistics of polymers in a lattice tube and unknotting of 4-plats

Authors: Nicholas R. Beaton, Kai Ishihara, Mahshid Atapour, Jeremy W. Eng, Mariel Vazquez, Koya Shimokawa, Christine E. Soteros

Abstract: It has been conjectured that the exponential growth rate of the number of lattice polygons with knot-type $K$ is the same as that for unknot polygons, and that the entropic critical exponent increases by one for each prime knot in the knot decomposition of $K$. We provide the first proof of this conjecture by considering knots and non-split links in tube $\mathbb{T}^*$, the… ▽ More It has been conjectured that the exponential growth rate of the number of lattice polygons with knot-type $K$ is the same as that for unknot polygons, and that the entropic critical exponent increases by one for each prime knot in the knot decomposition of $K$. We provide the first proof of this conjecture by considering knots and non-split links in tube $\mathbb{T}^*$, the $\infty \times 2\times 1$ sublattice of the simple cubic lattice. We establish upper and lower bounds relating the asymptotics of the number of $n$-edge polygons with fixed link-type in $\mathbb{T}^*$ to that of the number of $n$-edge unknots. For the upper bounds, we prove that polygons can be unknotted by braid insertions. For the lower bounds, we prove a pattern theorem for unknots using information from exact transfer-matrices. We prove new results for 4-plats and highlight connections to modelling DNA in nanochannels. △ Less

Submitted 9 February, 2023; v1 submitted 13 April, 2022; originally announced April 2022.

MSC Class: 05A16; 82D60; 57K10

Edge Computing and Communication for Energy-Efficient Earth Surveillance with LEO Satellites

Authors: Marc Martinez-Gost, Israel Leyva-Mayorga, Ana Pérez-Neira, Miguel Ángel Vázquez, Beatriz Soret, Marco Moretti

Abstract: Modern satellites deployed in low Earth orbit (LEO) accommodate processing payloads that can be exploited for edge computing. Furthermore, by implementing inter-satellite links, the LEO satellites in a constellation can route the data end-to-end (E2E). These capabilities can be exploited to greatly improve the current store-and-forward approaches in Earth surveillance systems. However, they give r… ▽ More Modern satellites deployed in low Earth orbit (LEO) accommodate processing payloads that can be exploited for edge computing. Furthermore, by implementing inter-satellite links, the LEO satellites in a constellation can route the data end-to-end (E2E). These capabilities can be exploited to greatly improve the current store-and-forward approaches in Earth surveillance systems. However, they give rise to an NP-hard problem of joint communication and edge computing resource management (RM). In this paper, we propose an algorithm that allows the satellites to select between computing the tasks at the edge or at a cloud server and to allocate an adequate power for communication. The overall objective is to minimize the energy consumption at the satellites while fulfilling specific service E2E latency constraints for the computing tasks. Experimental results show that our algorithm achieves energy savings of up to 18% when compared to the selected benchmarks with either 1) fixed edge computing decisions or 2) maximum power allocation. △ Less

Submitted 21 June, 2023; v1 submitted 17 November, 2021; originally announced November 2021.

Comments: Accepted in ICC Workshops 2022

A Bayesian inference and model selection algorithm with an optimisation scheme to infer the model noise power

Authors: J. Lopez-Santiago, L. Martino, J. Miguez, M. A. Vazquez

Abstract: Model fitting is possibly the most extended problem in science. Classical approaches include the use of least-squares fitting procedures and maximum likelihood methods to estimate the value of the parameters in the model. However, in recent years, Bayesian inference tools have gained traction. Usually, Markov chain Monte Carlo methods are applied to inference problems, but they present some disadv… ▽ More Model fitting is possibly the most extended problem in science. Classical approaches include the use of least-squares fitting procedures and maximum likelihood methods to estimate the value of the parameters in the model. However, in recent years, Bayesian inference tools have gained traction. Usually, Markov chain Monte Carlo methods are applied to inference problems, but they present some disadvantages, particularly when comparing different models fitted to the same dataset. Other Bayesian methods can deal with this issue in a natural and effective way. We have implemented an importance sampling algorithm adapted to Bayesian inference problems in which the power of the noise in the observations is not known a priori. The main advantage of importance sampling is that the model evidence can be derived directly from the so-called importance weights -- while MCMC methods demand considerable postprocessing. The use of our adaptive target, adaptive importance sampling (ATAIS) method is shown by inferring, on the one hand, the parameters of a simulated flaring event which includes a damped oscillation {and, on the other hand, real data from the Kepler mission. ATAIS includes a novel automatic adaptation of the target distribution. It automatically estimates the variance of the noise in the model. ATAIS admits parallelisation, which decreases the computational run-times notably. We compare our method against a nested sampling method within a model selection problem. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Comments: This article has been accepted for publication in MNRAS, published by Oxford University Press on behalf of the Royal Astronomical Society

Journal ref: Monthly Notices of the Royal Astronomical Society, Volume 507, Issue 3, Pages 3351-3361, 2021

Field tunable three-dimensional magnetic nanotextures in cobalt-nickel nanowires

Authors: I. M. Andersen, D. Wolf, L. A. Rodriguez, A. Lubk, D. Oliveros, C. Bran, T. Niermann, U. K. Rößler, M. Vazquez, C. Gatel, E. Snoeck

Abstract: Cylindrical magnetic nanowires with large transversal magnetocrystalline anisotropy have been shown to sustain non-trivial magnetic configurations resulting from the interplay of spatial confinement, exchange, and anisotropies. Exploiting these peculiar 3D spin configurations and their solitonic inhomogeneities are prospected to improve magnetization switching in future spintronics, such as power-… ▽ More Cylindrical magnetic nanowires with large transversal magnetocrystalline anisotropy have been shown to sustain non-trivial magnetic configurations resulting from the interplay of spatial confinement, exchange, and anisotropies. Exploiting these peculiar 3D spin configurations and their solitonic inhomogeneities are prospected to improve magnetization switching in future spintronics, such as power-saving magnetic memory and logic applications. Here we employ holographic vector field electron tomography to reconstruct the remanent magnetic states in CoNi nanowires with 10 nm resolution in 3D, with a particular focus on domain walls between remanent states and ubiquitous real-structure effects stemming from irregular morphology and anisotropy variations. By tuning the applied magnetic field direction, both longitudinal and transverse multi-vortex states of different chiralities and peculiar 3D features such as shifted vortex cores are stabilized. The chiral domain wall between the longitudinal vortices of opposite chiralities exhibits a complex 3D shape characterized by a push out of the central vortex line and a gain in exchange and anisotropy energy. A similar complex 3D texture, including bent vortex lines, forms at the domain boundary between transverse-vortex states and longitudinal configurations. Micromagnetic simulations allow an understanding of the origin of the observed complex magnetic states. △ Less

Submitted 28 July, 2021; originally announced July 2021.

Comments: 22 pages, 5 figures, preprent of original paper

Journal ref: Phys. Rev. Res. 3, (2021) 033085

Conformal Windows beyond Asymptotic Freedom

Authors: Andrew D. Bond, Daniel F. Litim, Gustavo Medina Vazquez

Abstract: We study four-dimensional gauge theories coupled to fermions in the fundamental and meson-like scalars. All requisite beta functions are provided for general gauge group and fermion representation. In the regime where asymptotic freedom is absent, we determine all interacting fixed points using perturbation theory up to three loop in the gauge and two loop in the Yukawa and quartic couplings. We f… ▽ More We study four-dimensional gauge theories coupled to fermions in the fundamental and meson-like scalars. All requisite beta functions are provided for general gauge group and fermion representation. In the regime where asymptotic freedom is absent, we determine all interacting fixed points using perturbation theory up to three loop in the gauge and two loop in the Yukawa and quartic couplings. We find that the conformal window of ultraviolet fixed points is narrowed-down by finite-$N$ corrections beyond the Veneziano limit. We also find a new infrared fixed point whose main features such as scaling exponents, UV-IR connecting trajectories, and phase diagram are provided. Both fixed points collide upon varying the number of fermion flavours $N_{\rm f}$, and conformality is lost through a saddle-node bifurcation. We further revisit the prospect for ultraviolet fixed points in the large $N_{\rm f}$ limit where matter field fluctuations dominate. Unlike at weak coupling, we do not find clear evidence for new scaling solutions even in the presence of scalar and Yukawa couplings. △ Less

Submitted 27 July, 2021; originally announced July 2021.

Comments: 20 pages, 10 figures

Uncertainty-aware deep learning for robot touch: Application to Bayesian tactile servo control

Authors: Manuel Floriano Vazquez, Nathan F. Lepora

Abstract: This work investigates uncertainty-aware deep learning (DL) in tactile robotics based on a general framework introduced recently for robot vision. For a test scenario, we consider optical tactile sensing in combination with DL to estimate the edge pose as a feedback signal to servo around various 2D test objects. We demonstrate that uncertainty-aware DL can improve the pose estimation over determi… ▽ More This work investigates uncertainty-aware deep learning (DL) in tactile robotics based on a general framework introduced recently for robot vision. For a test scenario, we consider optical tactile sensing in combination with DL to estimate the edge pose as a feedback signal to servo around various 2D test objects. We demonstrate that uncertainty-aware DL can improve the pose estimation over deterministic DL methods. The system estimates the uncertainty associated with each prediction, which is used along with temporal coherency to improve the predictions via a Kalman filter, and hence improve the tactile servo control. The robot is able to robustly follow all of the presented contour shapes to reduce not only the error by a factor of two but also smooth the trajectory from the undesired noisy behaviour caused by previous deterministic networks. In our view, as the field of tactile robotics matures in its use of DL, the estimation of uncertainty will become a key component in the control of physically interactive tasks in complex environments. △ Less

Submitted 29 April, 2021; originally announced April 2021.

Comments: Accepted in ICRA 2021

Direct Estimation of Appearance Models for Segmentation

Authors: Jeova F. S. Rocha Neto, Pedro Felzenszwalb, Marilyn Vazquez

Abstract: Image segmentation algorithms often depend on appearance models that characterize the distribution of pixel values in different image regions. We describe a new approach for estimating appearance models directly from an image, without explicit consideration of the pixels that make up each region. Our approach is based on novel algebraic expressions that relate local image statistics to the appeara… ▽ More Image segmentation algorithms often depend on appearance models that characterize the distribution of pixel values in different image regions. We describe a new approach for estimating appearance models directly from an image, without explicit consideration of the pixels that make up each region. Our approach is based on novel algebraic expressions that relate local image statistics to the appearance of spatially coherent regions. We describe two algorithms that can use the aforementioned algebraic expressions to estimate appearance models directly from an image. The first algorithm solves a system of linear and quadratic equations using a least squares formulation. The second algorithm is a spectral method based on an eigenvector computation. We present experimental results that demonstrate the proposed methods work well in practice and lead to effective image segmentation algorithms. △ Less

Submitted 15 September, 2021; v1 submitted 22 February, 2021; originally announced February 2021.

Comments: To appear in the SIAM Journal on Imaging Sciences (SIIMS)

MSC Class: 68U10; 62M05; 62H30; 65C20

An Approach to Deploy Interactive Robotic Simulators on the Web for HRI Experiments: Results in Social Robot Navigation

Authors: Nathan Tsoi, Mohamed Hussein, Olivia Fugikawa, J. D. Zhao, Marynel Vázquez

Abstract: Evaluation of social robot navigation inherently requires human input due to its qualitative nature. Motivated by the need to scale human evaluation, we propose a general method for deploying interactive, rich-client robotic simulations on the web. Prior approaches implement specific web-compatible simulators or provide tools to build a simulator for a specific study. Instead, our approach builds… ▽ More Evaluation of social robot navigation inherently requires human input due to its qualitative nature. Motivated by the need to scale human evaluation, we propose a general method for deploying interactive, rich-client robotic simulations on the web. Prior approaches implement specific web-compatible simulators or provide tools to build a simulator for a specific study. Instead, our approach builds on standard Linux tools to share a graphical desktop with remote users. We leverage these tools to deploy simulators on the web that would typically be constrained to desktop computing environments. As an example implementation of our approach, we introduce the SEAN Experimental Platform (SEAN-EP). With SEAN-EP, remote users can virtually interact with a mobile robot in the Social Environment for Autonomous Navigation, without installing any software on their computer or needing specialized hardware. We validated that SEAN-EP could quickly scale the collection of human feedback and its usability through an online survey. In addition, we compared human feedback from participants that interacted with a robot using SEAN-EP with feedback obtained through a more traditional video survey. Our results suggest that human perceptions of robots may differ based on whether they interact with the robots in simulation or observe them in videos. Also, they suggest that people perceive the surveys with interactive simulations as less mentally demanding than video surveys. △ Less

Submitted 16 August, 2021; v1 submitted 22 December, 2020; originally announced December 2020.

Topological Planning with Transformers for Vision-and-Language Navigation

Authors: Kevin Chen, Junshen K. Chen, Jo Chuang, Marynel Vázquez, Silvio Savarese

Abstract: Conventional approaches to vision-and-language navigation (VLN) are trained end-to-end but struggle to perform well in freely traversable environments. Inspired by the robotics community, we propose a modular approach to VLN using topological maps. Given a natural language instruction and topological map, our approach leverages attention mechanisms to predict a navigation plan in the map. The plan… ▽ More Conventional approaches to vision-and-language navigation (VLN) are trained end-to-end but struggle to perform well in freely traversable environments. Inspired by the robotics community, we propose a modular approach to VLN using topological maps. Given a natural language instruction and topological map, our approach leverages attention mechanisms to predict a navigation plan in the map. The plan is then executed with low-level actions (e.g. forward, rotate) using a robust controller. Experiments show that our method outperforms previous end-to-end approaches, generates interpretable navigation plans, and exhibits intelligent behaviors such as backtracking. △ Less

Submitted 9 December, 2020; originally announced December 2020.

Probing Excitons in Ultrathin PbS Nanoplatelets with Enhanced Near-Infrared Emission

Authors: Francisco Manteiga Vázquez, Qianli Yu, Lars F. Klepzig, Laurens D. A. Siebbeles, Ryan W. Crisp, Jannika Lauth

Abstract: Strongly quantum-confined 2D colloidal PbS nanoplatelets (NPLs) are highly interesting materials for near-infrared optoelectronic applications. Here, we use ultrafast transient optical absorption spectroscopy to study the characteristics and dynamics of photoexcited excitons in ultrathin PbS NPLs with a cubic (rock-salt) structure. The NPLs are synthesized at near room temperature from lead oleate… ▽ More Strongly quantum-confined 2D colloidal PbS nanoplatelets (NPLs) are highly interesting materials for near-infrared optoelectronic applications. Here, we use ultrafast transient optical absorption spectroscopy to study the characteristics and dynamics of photoexcited excitons in ultrathin PbS NPLs with a cubic (rock-salt) structure. The NPLs are synthesized at near room temperature from lead oleate and thiourea precursors and show an optical absorption onset at 680 nm (1.8 eV) as well as photoluminescence at 720 nm (1.7 eV). By treating PbS NPLs with CdCl2 in a post-synthetic step, their photoluminescence quantum yield is strongly enhanced from 1.4 % to 19.4 %. The surface treatment leads to an increased lead to sulfur ratio in the structures and associated reduced non-radiative recombination. Exciton-phonon interactions in pristine and CdCl2 treated PbS NPLs at frequencies of 1.8 and 2.2 THz are apparent from coherent oscillations in the measured transient absorption spectra. This study is an important step forward in unraveling and controlling the optical properties of IV-VI semiconductor NPLs. △ Less

Submitted 20 November, 2020; v1 submitted 13 November, 2020; originally announced November 2020.

A likely magnetic activity cycle for the exoplanet host M dwarf GJ 3512

Authors: J. Lopez-Santiago, L. Martino, J. Miguez, M. A. Vazquez

Abstract: Current radial velocity data from specialized instruments contain a large amount of information that may pass unnoticed if their analysis is not accurate. The joint use of Bayesian inference tools and frequency analysis has been shown effective to reveal exoplanets but they have been used less frequently to investigate stellar activity. We intend to use radial velocity data of the exoplanet host s… ▽ More Current radial velocity data from specialized instruments contain a large amount of information that may pass unnoticed if their analysis is not accurate. The joint use of Bayesian inference tools and frequency analysis has been shown effective to reveal exoplanets but they have been used less frequently to investigate stellar activity. We intend to use radial velocity data of the exoplanet host star GJ 3512 to investigate its magnetic activity. Our study includes the analysis of the photometric data available. The main objectives of our work are to constrain the orbital parameters of the exoplanets in the system, to determine the current level of activity of the star and to derive an activity cycle length for it. An adaptive importance sampling method was used to determine the parameters of the exoplanets orbit. Generalized Lomb-Scargle periodograms were constructed with both radial velocity curve and photometric data. A careful analysis of the harmonic frequencies was conducted in each periodogram. Our fit to multiple Keplerian orbits constrained the orbital parameters of two giant gas planets orbiting the star GJ 3512. The host star showed an increase of its magnetic activity during the last observing campaign. The accurate fit of the radial velocity curve data to the multi-Keplerian orbit permitted to reveal the star rotation in the residuals of the best fit and estimate an activity cycle length of ~ 14 years. △ Less

Submitted 15 October, 2020; originally announced October 2020.

Comments: Accepted for publication in the Astronomical Journal. 15 pages, 11 figures

Ion-dependent DNA Configuration in Bacteriophage Capsids

Authors: Pei Liu, Javier Arsuaga, M. Carme Calderer, Dmitry Golovaty, Mariel Vazquez, Shawn Walker

Abstract: Bacteriophages densely pack their long dsDNA genome inside a protein capsid. The conformation of the viral genome inside the capsid is consistent with a hexagonal liquid crystalline structure. Experiments have confirmed that the details of the hexagonal packing depend on the electrochemistry of the capsid and its environment. In this work, we propose a biophysical model that quantifies the relatio… ▽ More Bacteriophages densely pack their long dsDNA genome inside a protein capsid. The conformation of the viral genome inside the capsid is consistent with a hexagonal liquid crystalline structure. Experiments have confirmed that the details of the hexagonal packing depend on the electrochemistry of the capsid and its environment. In this work, we propose a biophysical model that quantifies the relationship between DNA configurations inside bacteriophage capsids and the types and concentrations of ions present in a biological system. We introduce an expression for the free energy which combines the electrostatic energy with contributions from bending of individual segments of DNA and Lennard-Jones-type interactions between these segments. The equilibrium points of this energy solve a partial differential equation that defines the distributions of DNA and the ions inside the capsid. We develop a computational approach that allows us to simulate much larger systems than what is currently possible using the existing simulations, typically done at a molecular level. In particular, we are able to estimate bending and repulsion between DNA segments as well as the full electrochemistry of the solution, both inside and outside of the capsid. The numerical results show good agreement with existing experiments and molecular dynamics simulations for small capsids. △ Less

Submitted 24 November, 2020; v1 submitted 15 September, 2020; originally announced September 2020.

SEAN: Social Environment for Autonomous Navigation

Authors: Nathan Tsoi, Mohamed Hussein, Jeacy Espinoza, Xavier Ruiz, Marynel Vázquez

Abstract: Social navigation research is performed on a variety of robotic platforms, scenarios, and environments. Making comparisons between navigation algorithms is challenging because of the effort involved in building these systems and the diversity of platforms used by the community; nonetheless, evaluation is critical to understanding progress in the field. In a step towards reproducible evaluation of… ▽ More Social navigation research is performed on a variety of robotic platforms, scenarios, and environments. Making comparisons between navigation algorithms is challenging because of the effort involved in building these systems and the diversity of platforms used by the community; nonetheless, evaluation is critical to understanding progress in the field. In a step towards reproducible evaluation of social navigation algorithms, we propose the Social Environment for Autonomous Navigation (SEAN). SEAN is a high visual fidelity, open source, and extensible social navigation simulation platform which includes a toolkit for evaluation of navigation algorithms. We demonstrate SEAN and its evaluation toolkit in two environments with dynamic pedestrians and using two different robots. △ Less

Submitted 9 September, 2020; originally announced September 2020.

Bridging the Gap: Unifying the Training and Evaluation of Neural Network Binary Classifiers

Authors: Nathan Tsoi, Kate Candon, Deyuan Li, Yofti Milkessa, Marynel Vázquez

Abstract: While neural network binary classifiers are often evaluated on metrics such as Accuracy and $F_1$-Score, they are commonly trained with a cross-entropy objective. How can this training-evaluation gap be addressed? While specific techniques have been adopted to optimize certain confusion matrix based metrics, it is challenging or impossible in some cases to generalize the techniques to other metric… ▽ More While neural network binary classifiers are often evaluated on metrics such as Accuracy and $F_1$-Score, they are commonly trained with a cross-entropy objective. How can this training-evaluation gap be addressed? While specific techniques have been adopted to optimize certain confusion matrix based metrics, it is challenging or impossible in some cases to generalize the techniques to other metrics. Adversarial learning approaches have also been proposed to optimize networks via confusion matrix based metrics, but they tend to be much slower than common training methods. In this work, we propose a unifying approach to training neural network binary classifiers that combines a differentiable approximation of the Heaviside function with a probabilistic view of the typical confusion matrix values using soft sets. Our theoretical analysis shows the benefit of using our method to optimize for a given evaluation metric, such as $F_1$-Score, with soft sets, and our extensive experiments show the effectiveness of our approach in several domains. △ Less

Submitted 1 June, 2022; v1 submitted 2 September, 2020; originally announced September 2020.

On the Use of AI for Satellite Communications

Authors: Miguel Ángel Vázquez, Pol Henarejos, Ana I. Pérez-Neira, Elena Grechi, Andreas Voight, Juan Carlos Gil, Irene Pappalardo, Federico Di Credico, Rocco Michele Lancellotti

Abstract: This document presents an initial approach to the investigation and development of artificial intelligence (AI) mechanisms in satellite communication (SatCom) systems. We first introduce the nowadays SatCom operations which are strongly dependent on the human intervention. Along with those use cases, we present an initial way of automatizing some of those tasks and we show the key AI tools capable… ▽ More This document presents an initial approach to the investigation and development of artificial intelligence (AI) mechanisms in satellite communication (SatCom) systems. We first introduce the nowadays SatCom operations which are strongly dependent on the human intervention. Along with those use cases, we present an initial way of automatizing some of those tasks and we show the key AI tools capable of dealing with those challenges. Finally, the long term AI developments in the SatCom sector is discussed. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Report number: IEEE Satellite and Space Communications Newsletter, Vol. 1, No. 29, December 2019

Decoding 5G-NR Communications via Deep Learning

Authors: Pol Henarejos, Miguel Ángel Vázquez

Abstract: Upcoming modern communications are based on 5G specifications and aim at providing solutions for novel vertical industries. One of the major changes of the physical layer is the use of Low-Density Parity-Check (LDPC) code for channel coding. Although LDPC codes introduce additional computational complexity compared with the previous generation, where Turbocodes where used, LDPC codes provide a rea… ▽ More Upcoming modern communications are based on 5G specifications and aim at providing solutions for novel vertical industries. One of the major changes of the physical layer is the use of Low-Density Parity-Check (LDPC) code for channel coding. Although LDPC codes introduce additional computational complexity compared with the previous generation, where Turbocodes where used, LDPC codes provide a reasonable trade-off in terms of complexity-Bit Error Rate (BER). In parallel to this, Deep Learning algorithms are experiencing a new revolution, specially to image and video processing. In this context, there are some approaches that can be exploited in radio communications. In this paper we propose to use Autoencoding Neural Networks (ANN) jointly with a Deep Neural Network (DNN) to construct Autoencoding Deep Neural Networks (ADNN) for demap** and decoding. The results will unveil that, for a particular BER target, $3$ dB less of Signal to Noise Ratio (SNR) is required, in Additive White Gaussian Noise (AWGN) channels. △ Less

Submitted 15 July, 2020; originally announced July 2020.

Comments: in Proceedings of IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) 2020, 4-8 May 2020, Barcelona (Spain)

Temperature Accelerated Life Test and Failure Analysis on Upright Metamorphic Ga0.37In0.63P/Ga0.83In0.17As/Ge Triple Junction Solar Cells

Authors: Vincenzo Orlando, Iván Lombardero, Mercedes Gabás, Neftali Nuñez, Manuel Vázquez, Pilar Espinet-González, Jesús Bautista, Rocio Romero, Carlos Algora

Abstract: A temperature accelerated life test on Upright Metamorphic Ga0.37In0.63P/Ga0.83In0.17As/Ge triple-junction solar cells has been carried out. The acceleration has been accomplished by subjecting the solar cells to temperatures (125, 145 and 165°C) significantly higher than the nominal working temperature inside a concentrator (90°C), while the nominal photo-current (500 suns) has been emulated by i… ▽ More A temperature accelerated life test on Upright Metamorphic Ga0.37In0.63P/Ga0.83In0.17As/Ge triple-junction solar cells has been carried out. The acceleration has been accomplished by subjecting the solar cells to temperatures (125, 145 and 165°C) significantly higher than the nominal working temperature inside a concentrator (90°C), while the nominal photo-current (500 suns) has been emulated by injecting current in darkness. The failure distributions have been fitted to an Arrhenius-Weibull model resulting in an activation energy of 1.39 eV. Accordingly, a 72 years warranty time for those solar cells for a place like Tucson (AZ, USA), was determined. After the ALT, an intense characterization campaign has been carried out in order to determine the failure origin. We have detected that temperature soak alone is enough to degrade the cell performance by increasing the leakage currents, the series resistance, and the recombination currents. When solar cells were also forward biased an increase of series resistance together with a reduction of short circuit current is detected. The failure analysis shows that: a) several metallization sub-products concentrate in several regions of front metal grid where they poison the silver, resulting in a two times reduction of the metal sheet resistance; b) the metal/cap layer interface is greatly degraded and there is also a deterioration of the cap layer crystalline quality producing a huge increase of the specific front contact resistance, c) the decrease of short circuit current is mainly due to the GaInP top subcell degradation. △ Less

Submitted 30 June, 2020; originally announced June 2020.

Heterogeneous CPU/GPU co-execution of CFD simulations on the POWER9 architecture: Application to airplane aerodynamics

Authors: R. Borrell, D. Dosimont, M. Garcia-Gasulla, G. Houzeaux, O. Lehmkuhl, V. Mehta, H. Owen, M. Vazquez, G. Oyarzun

Abstract: High fidelity Computational Fluid Dynamics simulations are generally associated with large computing requirements, which are progressively acute with each new generation of supercomputers. However, significant research efforts are required to unlock the computing power of leading-edge systems, currently referred to as pre-Exascale systems, based on increasingly complex architectures. In this paper… ▽ More High fidelity Computational Fluid Dynamics simulations are generally associated with large computing requirements, which are progressively acute with each new generation of supercomputers. However, significant research efforts are required to unlock the computing power of leading-edge systems, currently referred to as pre-Exascale systems, based on increasingly complex architectures. In this paper, we present the approach implemented in the computational mechanics code Alya. We describe in detail the parallelization strategy implemented to fully exploit the different levels of parallelism, together with a novel co-execution method for the efficient utilization of heterogeneous CPU/GPU architectures. The latter is based on a multi-code co-execution approach with a dynamic load balancing mechanism. The assessment of the performance of all the proposed strategies has been carried out for airplane simulations on the POWER9 architecture accelerated with NVIDIA Volta V100 GPUs. △ Less

Submitted 6 July, 2020; v1 submitted 12 May, 2020; originally announced May 2020.

Journal ref: Future Generation Computer Systems, Volume 107, 2020,Pages 31-48

Design and construction of a compact rotary substrate heater for deposition systems

Authors: Israel Perez, Tareik Netro, Mario Vazquez, Jose Elizalde

Abstract: We have designed and constructed a compact rotary substrate heater for the temperature range from 25 $^\circ$C to 700 $^\circ$C. The heater can be implemented in any deposition system where crystalline samples are needed. Its main function is to provide a heat treatment in situ during film growth. The temperature is monitored and controlled by a temperature controller coupled to a type K thermocou… ▽ More We have designed and constructed a compact rotary substrate heater for the temperature range from 25 $^\circ$C to 700 $^\circ$C. The heater can be implemented in any deposition system where crystalline samples are needed. Its main function is to provide a heat treatment in situ during film growth. The temperature is monitored and controlled by a temperature controller coupled to a type K thermocouple. A heater case was designed to host a resistive element and at the same time to allow the substrate holder to freely rotate. Rotation is crucial not only for film homogeneity during deposition but also for the elimination of temperature gradients on the substrate holder. To tolerate oxidizing and corrosive environments, the instrument was made of stainless steel which also works as "coolant" taking advantage of heat dissipation. The instrument performs well for long periods of time with stable temperatures. We hope that this project is useful for laboratories wishing to have a compact rotary heater that meets the requirements for crystal growth and film homogeneity. △ Less

Submitted 4 March, 2020; originally announced March 2020.

Comments: 7 pages, 8 figures

Journal ref: Canadian Journal of Physics, 98, 1009-1014, 2020

A survey of statistical learning techniques as applied to inexpensive pediatric Obstructive Sleep Apnea data

Authors: Emily T. Winn, Marilyn Vazquez, Prachi Loliencar, Kaisa Taipale, Xu Wang, Giseon Heo

Abstract: Pediatric obstructive sleep apnea affects an estimated 1-5% of elementary-school aged children and can lead to other detrimental health problems. Swift diagnosis and treatment are critical to a child's growth and development, but the variability of symptoms and the complexity of the available data make this a challenge. We take a first step in streamlining the process by focusing on inexpensive da… ▽ More Pediatric obstructive sleep apnea affects an estimated 1-5% of elementary-school aged children and can lead to other detrimental health problems. Swift diagnosis and treatment are critical to a child's growth and development, but the variability of symptoms and the complexity of the available data make this a challenge. We take a first step in streamlining the process by focusing on inexpensive data from questionnaires and craniofacial measurements. We apply correlation networks, the Mapper algorithm from topological data analysis, and singular value decomposition in a process of exploratory data analysis. We then apply a variety of supervised and unsupervised learning techniques from statistics, machine learning, and topology, ranging from support vector machines to Bayesian classifiers and manifold learning. Finally, we analyze the results of each of these methods and discuss the implications for a multi-data-sourced algorithm moving forward. △ Less

Submitted 8 August, 2021; v1 submitted 17 February, 2020; originally announced February 2020.

MSC Class: 62P10; 62-07; 62H30; 92B20 ACM Class: G.3; E.0; J.3

Exotic Transverse-Vortex Magnetic Configurations in CoNi Nanowires

Authors: Ingrid Andersen, Luis Alfredo Rodríguez González, Cristina Bran, Cécile Marcelot, Sébastien Joulié, Teresa Hungría, Manuel Vazquez, Christophe Gatel, Etienne Snoeck

Abstract: The magnetic configurations of cylindrical Co-rich CoNi nanowires have been quantitatively analyzed at the nanoscale by electron holography and correlated to local structural and chemical properties. The nanowires display grains of both face-centered cubic (fcc) and hexagonal close packed (hcp) crystal structures, with grain boundaries parallel to the nanowire axis direction. Electron holography e… ▽ More The magnetic configurations of cylindrical Co-rich CoNi nanowires have been quantitatively analyzed at the nanoscale by electron holography and correlated to local structural and chemical properties. The nanowires display grains of both face-centered cubic (fcc) and hexagonal close packed (hcp) crystal structures, with grain boundaries parallel to the nanowire axis direction. Electron holography evidences the existence of a complex exotic magnetic configuration characterized by two distinctly different types of magnetic configurations within a single nanowire: an array of periodical vortices separating small transverse domains in hcp rich regions with perpendicular easy axis orientation, and a mostly axial configuration parallel to the nanowire axis in regions with fcc grains. These vastly different domains are found to be caused by local variations in the chemical composition modifying the crystalline orientation and/or structure, which give rise to change in magnetic aniso-tropies. Micromagnetic simulations, including the structural properties that have been experimentally determined, allows for a deeper understanding of the complex magnetic states observed by electron holography. △ Less

Submitted 13 December, 2019; originally announced December 2019.

Investigation of magnetic noise in Advanced Virgo

Authors: A. Cirone, I. Fiori, F. Paoletti, M. M. Perez, A. R. Rodríguez, B. L. Swinkels, A. M. Vazquez, G. Gemme, A. Chincarini

Abstract: The Advanced Virgo (AdV) sensitivity might be influenced by the effects of environmental noise, in particular magnetic noise (MN). In order to show the impact on the gravitational-wave strain signal h(t) and on the AdV sensitivity, we must understand the coupling between the environmental magnetic activity and the strain. The relationship between the environmental noise - measured by a physical en… ▽ More The Advanced Virgo (AdV) sensitivity might be influenced by the effects of environmental noise, in particular magnetic noise (MN). In order to show the impact on the gravitational-wave strain signal h(t) and on the AdV sensitivity, we must understand the coupling between the environmental magnetic activity and the strain. The relationship between the environmental noise - measured by a physical environment monitor (PEM) - and h(t) is investigated using injection studies, where an intentional stimulus is introduced and the responses of both PEM sensors and the instrument are analyzed. We also present the most outstanding measurements and results obtained from both the characterization and the mitigation studies of the environmental MN. Results show that MN does not affect AdV sensitivity up to $\approx 100$ Mpc in BNS range. △ Less

Submitted 29 August, 2019; originally announced August 2019.