-
Metasurface-based Toroidal Lenslet Array Design for Addressing Laser Guide Star Elongation
Authors:
Josephine Munro,
Sarah E. Dean,
Neuton Li,
Israel J. Vaughn,
Andrew W. Kruse,
Tony Travouillon,
Dragomir N. Neshev,
Robert Sharp,
Andrey A. Sukhorukov
Abstract:
The Giant Magellan Telescope will use laser tomography adaptive optics to correct for atmospheric turbulence using artificial guide stars created in the sodium layer of the atmosphere (altitude ~95km). The sodium layer has appreciable thickness (~11km) and this results in the laser guide star being an elongated cylinder shape. Wavefront sensing with a Shack-Hartmann is challenging, as subapertures…
▽ More
The Giant Magellan Telescope will use laser tomography adaptive optics to correct for atmospheric turbulence using artificial guide stars created in the sodium layer of the atmosphere (altitude ~95km). The sodium layer has appreciable thickness (~11km) and this results in the laser guide star being an elongated cylinder shape. Wavefront sensing with a Shack-Hartmann is challenging, as subapertures located further away from the laser launch position image an increasingly elongated perspective of the laser guide star. Large detectors can be used to adequately pack and sample the images on the detector, however, this increases readout noise and limits the design space available for the wavefront sensor. To tackle this challenge, we propose an original solution based on nano-engineered meta-optics tailored to produce a spatially varying anamorphic image scale compression. We present meta-lenslet array designs that can deliver ~100% of the full anamorphic image size reduction required for focal lengths down to 8mm, and greater than 50% image size reduction for focal lengths down to 2mm. This will allow greatly improved sampling of the available information across the whole wavefront sensor, while still being a viable design within the limits of current-generation fabrication facilities.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Approximating Accelerator Impedances with Resonator Networks
Authors:
Brian J. Vaughn
Abstract:
It is common in the accelerator community to use the impedance of accelerator components to describe wake interactions in the frequency domain. However, it is often desirable to understand such wake interactions in the time domain in a general manner for excitations that are not necessarily Gaussian in nature. The conventional method for doing this involves taking the inverse Fourier Transform of…
▽ More
It is common in the accelerator community to use the impedance of accelerator components to describe wake interactions in the frequency domain. However, it is often desirable to understand such wake interactions in the time domain in a general manner for excitations that are not necessarily Gaussian in nature. The conventional method for doing this involves taking the inverse Fourier Transform of the component impedance, obtaining the Green's Function, and then convolving it with the desired excitation distribution. This method can prove numerically cumbersome, for a convolution integral must be evaluated for each individual point in time when the wake function is desired. An alternative to this method would be to compute the wake function analytically, which would sidestep the need for repetitive integration. Only a handful of cases, however, are simple enough for this method to be tenable. One of these cases is the case where the component in question is an RLC resonator, which has a closed-form analytical wake function solution. This means that a component which can be represented in terms of resonators can leverage this solution. As it happens, common network synthesis techniques may be used to map arbitrary impedance profiles to RLC resonator networks in a manner the accelerator community has yet to take advantage of. In this work, we will use Foster Canonical Resonator Networks and partial derivative descent optimization to develop a technique for synthesizing resonator networks that well approximate the impedances of real-world accelerator components. We will link this synthesis to the closed-form resonator wake function solution, giving rise to a powerful workflow that may be used to streamline beam dynamics simulations.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
Generative AI in Computing Education: Perspectives of Students and Instructors
Authors:
Cynthia Zastudil,
Magdalena Rogalska,
Christine Kapp,
Jennifer Vaughn,
Stephen MacNeil
Abstract:
Generative models are now capable of producing natural language text that is, in some cases, comparable in quality to the text produced by people. In the computing education context, these models are being used to generate code, code explanations, and programming exercises. The rapid adoption of these models has prompted multiple position papers and workshops which discuss the implications of thes…
▽ More
Generative models are now capable of producing natural language text that is, in some cases, comparable in quality to the text produced by people. In the computing education context, these models are being used to generate code, code explanations, and programming exercises. The rapid adoption of these models has prompted multiple position papers and workshops which discuss the implications of these models for computing education, both positive and negative. This paper presents results from a series of semi-structured interviews with 12 students and 6 instructors about their awareness, experiences, and preferences regarding the use of tools powered by generative AI in computing classrooms. The results suggest that Generative AI (GAI) tools will play an increasingly significant role in computing education. However, students and instructors also raised numerous concerns about how these models should be integrated to best support the needs and learning goals of students. We also identified interesting tensions and alignments that emerged between how instructors and students prefer to engage with these models. We discuss these results and provide recommendations related to curriculum development, assessment methods, and pedagogical practice. As GAI tools become increasingly prevalent, it's important to understand educational stakeholders' preferences and values to ensure that these tools can be used for good and that potential harms can be mitigated.
△ Less
Submitted 8 August, 2023;
originally announced August 2023.
-
A Simple, Flexible Technique for RF Cavity Wake-Field Calculations
Authors:
Brian J. Vaughn
Abstract:
It is typical in the accelerator field to model machine components, especially RF cavities, as parallel RLC resonators. To properly model wake-fields, knowledge of the time-domain voltage resulting from beam excitation is often necessary. While analytical and quasi-analytical expressions are available to accomplish this for common bunch distributions such as the Gaussian, analogous results for les…
▽ More
It is typical in the accelerator field to model machine components, especially RF cavities, as parallel RLC resonators. To properly model wake-fields, knowledge of the time-domain voltage resulting from beam excitation is often necessary. While analytical and quasi-analytical expressions are available to accomplish this for common bunch distributions such as the Gaussian, analogous results for less standard distributions can be difficult or computationally-taxing to obtain using direct methods, which opens the door for the development of a more generalized technique. In this paper, a formulation is created that allows for the simple computation of the time-domain voltage waveform of an RLC resonator. The formulation uses the Cauchy Residue Theorem to extract the convolution result from the Fourier Domain, and if current distribution Fourier Transform has no poles, knowledge of its value is only required at one specific evaluation point. This greatly simplifies the computation of the time domain voltage for a large amount of bunch distributions both common and uncommon. Accuracy considerations for this technique and the approximation of accelerator components as RLC resonators are also discussed, resulting the development of a figure of merit for quantifying the robustness of this type of approximation.
△ Less
Submitted 8 December, 2023; v1 submitted 9 May, 2023;
originally announced May 2023.
-
Measuring Pain in Sickle Cell Disease using Clinical Text
Authors:
Amanuel Alambo,
Ryan Andrew,
Sid Gollarahalli,
Jacqueline Vaughn,
Tanvi Banerjee,
Krishnaprasad Thirunarayan,
Daniel Abrams,
Nirmish Shah
Abstract:
Sickle Cell Disease (SCD) is a hereditary disorder of red blood cells in humans. Complications such as pain, stroke, and organ failure occur in SCD as malformed, sickled red blood cells passing through small blood vessels get trapped. Particularly, acute pain is known to be the primary symptom of SCD. The insidious and subjective nature of SCD pain leads to challenges in pain assessment among Medi…
▽ More
Sickle Cell Disease (SCD) is a hereditary disorder of red blood cells in humans. Complications such as pain, stroke, and organ failure occur in SCD as malformed, sickled red blood cells passing through small blood vessels get trapped. Particularly, acute pain is known to be the primary symptom of SCD. The insidious and subjective nature of SCD pain leads to challenges in pain assessment among Medical Practitioners (MPs). Thus, accurate identification of markers of pain in patients with SCD is crucial for pain management. Classifying clinical notes of patients with SCD based on their pain level enables MPs to give appropriate treatment. We propose a binary classification model to predict pain relevance of clinical notes and a multiclass classification model to predict pain level. While our four binary machine learning (ML) classifiers are comparable in their performance, Decision Trees had the best performance for the multiclass classification task achieving 0.70 in F-measure. Our results show the potential clinical text analysis and machine learning offer to pain management in sickle cell patients.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
Workplace Accidents and Self-Organized Criticality
Authors:
John C. Mauro,
Brett Diehl,
Richard F. Marcellin,
Daniel J. Vaughn
Abstract:
The occurrence of workplace accidents is described within the context of self-organized criticality, a theory from statistical physics that governs a wide range of phenomena across physics, biology, geosciences, economics, and the social sciences. Workplace accident data from the U.S. Bureau of Labor Statistics reveal a power-law relationship between the number of accidents and their severity as m…
▽ More
The occurrence of workplace accidents is described within the context of self-organized criticality, a theory from statistical physics that governs a wide range of phenomena across physics, biology, geosciences, economics, and the social sciences. Workplace accident data from the U.S. Bureau of Labor Statistics reveal a power-law relationship between the number of accidents and their severity as measured by the number of days lost from work. This power-law scaling is indicative of workplace accidents being governed by self-organized criticality, suggesting that nearly all workplace accidents have a common underlying cause, independent of their severity. Such power-law scaling is found for all labor categories documented by the U.S. Bureau of Labor Statistics. Our results provide scientific support for the Heinrich accident triangle, with the practical implication that suppressing the rate of severe accidents requires changing the attitude toward workplace safety in general. By creating a culture that values safety, empowers individuals, and strives to continuously improve, accident rates can be suppressed across the full range of severities.
△ Less
Submitted 20 March, 2018;
originally announced March 2018.
-
Statistical scene generation for polarimetric imaging systems
Authors:
Israel J. Vaughn,
Andrey S. Alenin,
J. Scott Tyo
Abstract:
Little publicly available data exists for polarimetric measurements. When designing task specific polarimetric systems, the statistical properties of the task specific data becomes important. Until better polarimetric datasets are available to deduce statistics from, the statistics must be simulated to test instrument performance. Most imaged scenes have been shown to follow a power law power spec…
▽ More
Little publicly available data exists for polarimetric measurements. When designing task specific polarimetric systems, the statistical properties of the task specific data becomes important. Until better polarimetric datasets are available to deduce statistics from, the statistics must be simulated to test instrument performance. Most imaged scenes have been shown to follow a power law power spectral density distribution, for both natural and city scenes. Furthermore, imaged data appears to follow a power law power spectral distribution temporally. We are interested in generating image sets which change over time, and at the same time are correlated between different components (spectral or polarimetric). In this brief communication, we present a framework and provide code to generate such data.
△ Less
Submitted 10 July, 2017;
originally announced July 2017.
-
Topic Grids for Homogeneous Data Visualization
Authors:
Shih-Chieh Su,
Joseph Vaughn,
Jean-Laurent Huynh
Abstract:
We propose the topic grids to detect anomaly and analyze the behavior based on the access log content. Content-based behavioral risk is quantified in the high dimensional space where the topics are generated from the log. The topics are being projected homogeneously into a space that is perception- and interaction-friendly to the human experts.
We propose the topic grids to detect anomaly and analyze the behavior based on the access log content. Content-based behavioral risk is quantified in the high dimensional space where the topics are generated from the log. The topics are being projected homogeneously into a space that is perception- and interaction-friendly to the human experts.
△ Less
Submitted 23 August, 2016;
originally announced August 2016.
-
Atom-by-atom extraction using scanning tunneling microscope tip-cluster interaction
Authors:
A. Deshpande,
H. Yildirim,
A. Kara,
D. P. Acharya,
J. Vaughn,
T. S. Rahman,
S. -W. Hla
Abstract:
We investigate atomistic details of a single atom extraction process realized by using scanning tunneling microscope (STM) tip-cluster interaction on a Ag(111) surface at 6 K. Single atoms are extracted from a silver cluster one atom at a time using small tunneling biases less than 35 mV and a threshold tunneling resistance of 47 kOhm. A combination of total energy calculations and molecular dyn…
▽ More
We investigate atomistic details of a single atom extraction process realized by using scanning tunneling microscope (STM) tip-cluster interaction on a Ag(111) surface at 6 K. Single atoms are extracted from a silver cluster one atom at a time using small tunneling biases less than 35 mV and a threshold tunneling resistance of 47 kOhm. A combination of total energy calculations and molecular dynamics simulations shows a lowering of the atom extraction barrier upon approaching the tip to the cluster. Thus, a mere tuning of the proximity between the tip and the cluster governs the extraction process and is sufficient to extract an atom. The atomically precise control and reproducibility of the process are demonstrated by repeatedly extracting single atoms from a silver cluster on an atom-by-atom basis.
△ Less
Submitted 3 November, 2006;
originally announced November 2006.