-
Simulating carbon mineralization at pore scale in capillary networks of digital rock
Authors:
David A. Lazo Vasquez,
Jaione Tirapu Azpiroz,
Rodrigo Neumann Barros Ferreira,
Ronaldo Giro,
Manuela Fernandes Blanco Rodriguez,
Matheus Esteves Ferreira,
Mathias B. Steiner
Abstract:
Predicting the geometrical evolution of the pore space in geological formations due to fluid-solid interactions has applications in reservoir engineering, oil recovery, and geological storage of carbon dioxide. However, modeling frameworks that combine fluid flow with physical and chemical processes at a rock's pore scale are scarce. Here, we report a method for modeling a rock's pore space as a n…
▽ More
Predicting the geometrical evolution of the pore space in geological formations due to fluid-solid interactions has applications in reservoir engineering, oil recovery, and geological storage of carbon dioxide. However, modeling frameworks that combine fluid flow with physical and chemical processes at a rock's pore scale are scarce. Here, we report a method for modeling a rock's pore space as a network of connected capillaries and to simulate the capillary diameter modifications caused by reactive flow processes. Specifically, we model mineral erosion, deposition, dissolution, and precipitation processes by solving the transport equations iteratively, computing diameter changes within each capillary of the network simultaneously. Our automated modeling framework enables simulations on digital rock samples as large as (1.125mm)$^3$ with 125$\times 10^6$ voxels within seconds of CPU time per iteration. As an application of the computational method, we have simulated brine injection and calcium carbonate precipitation in sandstone. For quantitatively comparing simulation results obtained with models predicting either a constant or a flow-rate dependent precipitation, we track the time-dependent capillary diameter distribution as well as the permeability of the connected pore space. For validation and reuse, we have made the automated simulation workflow, the reactive flow model library, and the digital rock samples available in public repositories.
△ Less
Submitted 4 July, 2024;
originally announced July 2024.
-
User-Centric Beam Selection and Precoding Design for Coordinated Multiple-Satellite Systems
Authors:
Vu Nguyen Ha,
Duy H. N. Nguyen,
Juan C. -M. Duncan,
Jorge L. Gonzalez-Rios,
Juan A. Vasquez,
Geoffrey Eappen,
Luis M. Garces-Socarras,
Rakesh Palisetty,
Symeon Chatzinotas,
Bjorn Ottersten
Abstract:
This paper introduces a joint optimization framework for user-centric beam selection and linear precoding (LP) design in a coordinated multiple-satellite (CoMSat) system, employing a Digital-Fourier-Transform-based (DFT) beamforming (BF) technique. Regarding serving users at their target SINRs and minimizing the total transmit power, the scheme aims to efficiently determine satellites for users to…
▽ More
This paper introduces a joint optimization framework for user-centric beam selection and linear precoding (LP) design in a coordinated multiple-satellite (CoMSat) system, employing a Digital-Fourier-Transform-based (DFT) beamforming (BF) technique. Regarding serving users at their target SINRs and minimizing the total transmit power, the scheme aims to efficiently determine satellites for users to associate with and activate the best cluster of beams together with optimizing LP for every satellite-to-user transmission. These technical objectives are first framed as a complex mixed-integer programming (MIP) challenge. To tackle this, we reformulate it into a joint cluster association and LP design problem. Then, by theoretically analyzing the duality relationship between downlink and uplink transmissions, we develop an efficient iterative method to identify the optimal solution. Additionally, a simpler duality approach for rapid beam selection and LP design is presented for comparison purposes. Simulation results underscore the effectiveness of our proposed schemes across various settings.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Collider sensitivity to SMEFT heavy-quark operators at one-loop in top-quark processes
Authors:
Celine Degrande,
Rogerio Rosenfeld,
Andres Vasquez
Abstract:
We study the effects of four-heavy-quark operators in the production of top quarks in the framework of the Standard Model Effective Field Theory (SMEFT) at the LHC. In particular, we compute for the first time the total contribution of the four-top-quark operator which enters only at the one-loop level in the top-quark pair production process. Analytical results at one-loop are presented for the g…
▽ More
We study the effects of four-heavy-quark operators in the production of top quarks in the framework of the Standard Model Effective Field Theory (SMEFT) at the LHC. In particular, we compute for the first time the total contribution of the four-top-quark operator which enters only at the one-loop level in the top-quark pair production process. Analytical results at one-loop are presented for the gluon- and quark-initiated sub-processes, which allowed a first complete validation of the SMEFT@NLO in Madgraph5_aMC@NLO. The 95% CL bounds on four-heavy-quark operators from the available top-quark pair and four-top-quark production data are provided, which are complementary to other bounds found in the literature. We focus on the comparison of the sensitivities of the top-quark pair and the four-top-quark production processes, where in the latter case the four-top-quark operator contributes at tree-level. We conclude that the sensitivities of the two processes to four-heavy-quark operators are comparable. The projected sensitivities of both processes at HL-LHC are also presented.
△ Less
Submitted 21 June, 2024; v1 submitted 9 February, 2024;
originally announced February 2024.
-
Multi-zone trapped-ion qubit control in an integrated photonics QCCD device
Authors:
Carmelo Mordini,
Alfredo Ricci Vasquez,
Yuto Motohashi,
Mose Müller,
Maciej Malinowski,
Chi Zhang,
Karan K. Mehta,
Daniel Kienzler,
Jonathan P. Home
Abstract:
Multiplexed operations and extended coherent control over multiple trap** sites are fundamental requirements for a trapped-ion processor in a large scale architecture. Here we demonstrate these building blocks using a surface electrode trap with integrated photonic components which are scalable to larger numbers of zones. We implement a Ramsey sequence using the integrated light in two zones, se…
▽ More
Multiplexed operations and extended coherent control over multiple trap** sites are fundamental requirements for a trapped-ion processor in a large scale architecture. Here we demonstrate these building blocks using a surface electrode trap with integrated photonic components which are scalable to larger numbers of zones. We implement a Ramsey sequence using the integrated light in two zones, separated by 375 $μ$m, performing transport of the ion from one zone to the other in 200 $μ$s between pulses. In order to achieve low motional excitation during transport we developed techniques to measure and mitigate the effect of the exposed dielectric surfaces used to deliver the integrated light to the ion. We also demonstrate simultaneous control of two ions in separate zones with low optical crosstalk, and use this to perform simultaneous spectroscopy to correlate field noise between the two sites. Our work demonstrates the first transport and coherent multi-zone operations in integrated photonic ion trap systems, forming the basis for further scaling in the trapped-ion QCCD architecture.
△ Less
Submitted 23 February, 2024; v1 submitted 31 January, 2024;
originally announced January 2024.
-
Optimizing carbon dioxide trap** for geological storage
Authors:
Jaione Tirapu Azpiroz,
Ronaldo Giro,
Rodrigo Neumann Barros Ferreira,
Marcio Nogueira Pereira da Silva,
Manuela Fernandes Blanco Rodriguez,
Adolfo E. Correa Lopez,
David A. Lazo Vasquez,
Matheus Esteves Ferreira,
Mariana Del Grande,
Ademir Ferreira Da Silva,
Mathias B. Steiner
Abstract:
Carbon dioxide (CO2) trap** in capillary networks of reservoir rocks is a pathway to long-term geological storage. At pore scale, the CO2 trap** potential depends on injection pressure, temperature, and the rock's interaction with the surrounding fluids. Modeling this interaction requires adequate representations of both capillary volume and surface. For the lack of scalable representations, h…
▽ More
Carbon dioxide (CO2) trap** in capillary networks of reservoir rocks is a pathway to long-term geological storage. At pore scale, the CO2 trap** potential depends on injection pressure, temperature, and the rock's interaction with the surrounding fluids. Modeling this interaction requires adequate representations of both capillary volume and surface. For the lack of scalable representations, however, the prediction of a rock's CO2 storage potential has been challenging. Here, we report how to represent a rock's pore space by statistically sampled capillary networks (ssCN) that preserve morphological rock characteristics. We have used the ssCN method to simulate CO2 drainage within a representative sandstone sample at reservoir pressures and temperatures, exploring intermediate- and CO2-wet conditions. This wetting regime is often neglected, despite evidence of plausibility. By raising pressure and temperature we observe increasing CO2 penetration within the capillary network. For contact angles approaching 90 degrees, the CO2 saturation exhibits a pronounced maximum reaching 80 percent of the accessible pore volume. This is about twice as high as the saturation values reported previously. For enabling validation of our results and a broader application of our methodology, we have made available the rock tomography data, the digital rock computational workflows, and the ssCN models used in this study.
△ Less
Submitted 20 December, 2023;
originally announced December 2023.
-
Harnessing the Power of Swarm Satellite Networks with Wideband Distributed Beamforming
Authors:
Juan Carlos Merlano Duncan,
Vu Nguyen Ha,
Jevgenij Krivochiza,
Rakesh Palisetty,
Geoffrey Eappen,
Juan Andres Vasquez,
Wallace Alves Martins,
Symeon Chatzinotas,
Björn Ottersten
Abstract:
The space communications industry is challenged to develop a technology that can deliver broadband services to user terminals equipped with miniature antennas, such as handheld devices. One potential solution to establish links with ground users is the deployment of massive antennas in one single spacecraft. However, this is not cost-effective. Aligning with recent \emph{NewSpace} activities direc…
▽ More
The space communications industry is challenged to develop a technology that can deliver broadband services to user terminals equipped with miniature antennas, such as handheld devices. One potential solution to establish links with ground users is the deployment of massive antennas in one single spacecraft. However, this is not cost-effective. Aligning with recent \emph{NewSpace} activities directed toward miniaturization, mass production, and a significant reduction in spacecraft launch costs, an alternative could be distributed beamforming from multiple satellites. In this context, we propose a distributed beamforming modeling technique for wideband signals. We also consider the statistical behavior of the relative geometry of the swarm nodes. The paper assesses the proposed technique via computer simulations, providing interesting results on the beamforming gains in terms of power and the security of the communication against potential eavesdroppers at non-intended pointing angles. This approach paves the way for further exploration of wideband distributed beamforming from satellite swarms in several future communication applications.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
Unveiling the Heavy Neutrino Nature at LHCb
Authors:
G. A. Vasquez,
Jilberto Zamora-Saa
Abstract:
In this work, we study the lepton number violating Bc meson decays via one intermediate on-shell heavy neutrino. The specific studied process is $B_{c}^{+} \to μ^{+} \ N \to μ^{+} μ^{+} τ^{-} ν$ which could allow distinguishing the nature of the heavy neutrino nature (Dirac or Majorana) by studying the tau lepton energy spectrum in the LHCb experiment. The result suggests that this signature could…
▽ More
In this work, we study the lepton number violating Bc meson decays via one intermediate on-shell heavy neutrino. The specific studied process is $B_{c}^{+} \to μ^{+} \ N \to μ^{+} μ^{+} τ^{-} ν$ which could allow distinguishing the nature of the heavy neutrino nature (Dirac or Majorana) by studying the tau lepton energy spectrum in the LHCb experiment. The result suggests that this signature could be observed in the collected data during the HL-LHCb lifetime.
△ Less
Submitted 4 July, 2023;
originally announced July 2023.
-
3UCubed: The IMAP Student Collaboration CubeSat Project
Authors:
Marcus Alfred,
Sonya Smith,
Charles Kim,
Carissma McGee,
Ruth Davis,
Myles Pope,
Taran Richardson,
Trinity Sager,
Avery Williams,
Matthew Gales,
Wilson Jean Baptiste,
Tyrese Kierstdet,
Oluwatamilore Ogunbanjo,
Laura Peticolas,
Lynn Cominsky,
Garrett Jernigan,
Jeffrey Reedy,
Doug Clarke,
Sabrina Blais,
Erik Castellanos-Vasquez,
Jack Dawson,
Erika Diaz Ramirez,
Walter Foster,
Cristopher Gopar Carreno,
Haley Joerger
, et al. (17 additional authors not shown)
Abstract:
The 3UCubed project is a 3U CubeSat being jointly developed by the University of New Hampshire, Sonoma State University, and Howard University as a part of the NASA Interstellar Map** and Acceleration Probe, IMAP, student collaboration. This project comprises of a multidisciplinary team of undergraduate students from all three universities. The mission goal of the 3UCubed is to understand how Ea…
▽ More
The 3UCubed project is a 3U CubeSat being jointly developed by the University of New Hampshire, Sonoma State University, and Howard University as a part of the NASA Interstellar Map** and Acceleration Probe, IMAP, student collaboration. This project comprises of a multidisciplinary team of undergraduate students from all three universities. The mission goal of the 3UCubed is to understand how Earths polar upper atmosphere the thermosphere in Earths auroral regions, responds to particle precipitation and solar wind forcing, and internal magnetospheric processes.
3UCubed includes two instruments with rocket heritage to achieve the science mission: an ultraviolet photomultiplier tube, UVPMT, and an electron retarding potential analyzer ERPA. The spacecraft bus consists of the following subsystems: Attitude Determination and Control, Command and Data Handling, Power, Communication, Structural, and Thermal.
Currently, the project is in the post-PDR stage, starting to build and test engineering models to develop a FlatSat prior to critical design review in 2023. The goal is to launch at least one 3U CubeSat to collect science data close to the anticipated peak of Solar Cycle 25 around July 2025. Our mother mission, IMAP, is also projected to launch in 2025, which will let us jointly analyze the science data of the main mission, providing the solar wind measurements and inputs to the magnetosphere with that of 3UCubed, providing the response of Earths cusp to these inputs.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
Charting Visual Impression of Robot Hands
Authors:
Hasti Seifi,
Steven A. Vasquez,
Hyunyoung Kim,
Pooyan Fazli
Abstract:
A wide variety of robotic hands have been designed to date. Yet, we do not know how users perceive these hands and feel about interacting with them. To inform hand design for social robots, we compiled a dataset of 73 robot hands and ran an online study, in which 160 users rated their impressions of the hands using 17 rating scales. Next, we developed 17 regression models that can predict user rat…
▽ More
A wide variety of robotic hands have been designed to date. Yet, we do not know how users perceive these hands and feel about interacting with them. To inform hand design for social robots, we compiled a dataset of 73 robot hands and ran an online study, in which 160 users rated their impressions of the hands using 17 rating scales. Next, we developed 17 regression models that can predict user ratings (e.g., humanlike) from the design features of the hands (e.g., number of fingers). The models have less than a 10-point error in predicting the user ratings on a 0-100 scale. The shape of the fingertips, color scheme, and size of the hands influence the user ratings the most. We present simple guidelines to improve user impression of robot hands and outline remaining questions for future work.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
Joint Linear Precoding and DFT Beamforming Design for Massive MIMO Satellite Communication
Authors:
Vu Nguyen Ha,
Zaid Abdullah,
Geoffrey Eappen,
Juan Carlos Merlano Duncan,
Rakesh Palisetty,
Jorge Luis Gonzalez Rios,
Wallace Alves Martins,
Hong-Fu Chou,
Juan Andres Vasquez,
Luis Manuel Garces-Socarras,
Haythem Chaker,
Symeon Chatzinotas
Abstract:
This paper jointly designs linear precoding (LP) and codebook-based beamforming implemented in a satellite with massive multiple-input multiple-output (mMIMO) antenna technology. The codebook of beamforming weights is built using the columns of the discrete Fourier transform (DFT) matrix, and the resulting joint design maximizes the achievable throughput under limited transmission power. The corre…
▽ More
This paper jointly designs linear precoding (LP) and codebook-based beamforming implemented in a satellite with massive multiple-input multiple-output (mMIMO) antenna technology. The codebook of beamforming weights is built using the columns of the discrete Fourier transform (DFT) matrix, and the resulting joint design maximizes the achievable throughput under limited transmission power. The corresponding optimization problem is first formulated as a mixed integer non-linear programming (MINP). To adequately address this challenging problem, an efficient LP and DFT-based beamforming algorithm are developed by utilizing several optimization tools, such as the weighted minimum mean square error transformation, duality method, and Hungarian algorithm. In addition, a greedy algorithm is proposed for benchmarking. A complexity analysis of these solutions is provided along with a comprehensive set of Monte Carlo simulations demonstrating the efficiency of our proposed algorithms.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
Control of an atomic quadrupole transition in a phase-stable standing wave
Authors:
Alfredo Ricci Vasquez,
Carmelo Mordini,
Chloé Vérnière,
Martin Stadler,
Maciej Malinowski,
Chi Zhang,
Daniel Kienzler,
Karan K. Mehta,
Jonathan P. Home
Abstract:
Using a single calcium ion confined in a surface-electrode trap, we study the interaction of electric quadrupole transitions with a passively phase-stable optical standing wave field sourced by photonics integrated within the trap. We characterize the optical fields through spatial map** of the Rabi frequencies of both carrier and motional sideband transitions as well as AC Stark shifts. Our mea…
▽ More
Using a single calcium ion confined in a surface-electrode trap, we study the interaction of electric quadrupole transitions with a passively phase-stable optical standing wave field sourced by photonics integrated within the trap. We characterize the optical fields through spatial map** of the Rabi frequencies of both carrier and motional sideband transitions as well as AC Stark shifts. Our measurements demonstrate the ability to engineer favorable combinations of sideband and carrier Rabi frequency as well as AC Stark shifts for specific tasks in quantum state control and metrology.
△ Less
Submitted 6 June, 2023; v1 submitted 5 October, 2022;
originally announced October 2022.
-
P-wave Sommerfeld enhancement near threshold: a simplified approach
Authors:
Carlos Henrique de Lima,
Alberto Tonero,
Andres Vasquez,
Rogerio Rosenfeld
Abstract:
The calculation of P-wave Sommerfeld enhancement in processes with unstable particles in the final state is known to be divergent. In a complete description, where resonant (on-shell unstable particles) and non-resonant contributions are included, it has been shown that results are finite. For most beyond the Standard Model applications, these complete calculations are not readily available. In th…
▽ More
The calculation of P-wave Sommerfeld enhancement in processes with unstable particles in the final state is known to be divergent. In a complete description, where resonant (on-shell unstable particles) and non-resonant contributions are included, it has been shown that results are finite. For most beyond the Standard Model applications, these complete calculations are not readily available. In this work, we are interested in the near-threshold region and we consider only the resonant contribution. In this case, we provide a simplified prescription to compute the P-wave Sommerfeld enhancement in the narrow-width approximation of the unstable particle that directly eliminates divergences. We show that we can define a finite resonant contribution without the inclusion of the non-resonant processes in a way similar to the usual S-wave Sommerfeld enhancement.
△ Less
Submitted 4 October, 2023; v1 submitted 28 August, 2022;
originally announced August 2022.
-
Scaling Laws of Quiet-Sun Coronal Loops
Authors:
C. Mac Cormack,
M. López Fuentes,
C. H. Mandrini,
D. G. Lloveras,
M. Poisson,
A. M. Vásquez
Abstract:
We study a series of relations between physical parameters in coronal loops of the quiet Sun reconstructed by combining tomographic techniques and modeling of the coronal magnetic field. We use differential emission measure tomography (DEMT) to determine the three-dimensional distribution of the electron density and temperature in the corona, and we model the magnetic field with a potential-field…
▽ More
We study a series of relations between physical parameters in coronal loops of the quiet Sun reconstructed by combining tomographic techniques and modeling of the coronal magnetic field. We use differential emission measure tomography (DEMT) to determine the three-dimensional distribution of the electron density and temperature in the corona, and we model the magnetic field with a potential-field source-surface (PFSS) extrapolation of a synoptic magnetogram. By tracing the DEMT products along the extrapolated magnetic field lines, we obtain loop-averaged electron density and temperature. Also, loop-integrated energy-related quantities are computed for each closed magnetic field line. We apply the procedure to Carrington rotation 2082, during the activity minimum between Solar Cycles 23 and 24. We find a scaling law between the loop-average density $N$ and loop length $L$, $N_m \sim L^{-0.35}$, but we do not find a significant relation between loop-average temperature and loop length. We confirm though the previously found result that loop-average temperatures at the equatorial latitudes are lower than at higher latitudes. We associate this behavior with the presence at the equatorial latitudes of loops with decreasing temperatures along their length (``down'' loops), which are in general colder than loops with increasing temperatures (``up'' loops). We find that the obtained scalings for quiet-Sun loops do not generally agree with those found in the case of AR loops from previous observational and theoretical studies. We suggest that to better understand the relations found, it is necessary to forward model the reconstructed loops using hydrodynamic codes working under the physical conditions of the quiet-Sun corona.
△ Less
Submitted 20 June, 2022;
originally announced June 2022.
-
Enthalpy-based modeling of tomographically reconstructed quiet-Sun coronal loops
Authors:
C. Mac Cormack,
M. López Fuentes,
C. H. Mandrini,
D. G. Lloveras,
A. M. Vásquez
Abstract:
The structure of the solar corona is made of magnetic flux tubes or loops. Due to the lack of contrast with their environment, observing and studying coronal loops in the quiet Sun is extremely difficult. In this work we use a differential emission measure tomographic (DEMT) technique to reconstruct, from a series of EUV images covering an entire solar rotation, the average 3D distribution of the…
▽ More
The structure of the solar corona is made of magnetic flux tubes or loops. Due to the lack of contrast with their environment, observing and studying coronal loops in the quiet Sun is extremely difficult. In this work we use a differential emission measure tomographic (DEMT) technique to reconstruct, from a series of EUV images covering an entire solar rotation, the average 3D distribution of the thermal properties of the coronal plasma. By combining the DEMT products with extrapolations of the global coronal magnetic field, we reconstruct coronal loops and obtain the energy input required to keep them at the typical million-degree temperatures of the corona. We statistically study a large number of reconstructed loops for Carrington rotation (CR) 2082 obtaining a series of typical average loops of different lengths. We look for relations between the thermal properties and the lengths of the constructed typical loops and find similar results to those found in a previous work \citep{maccormack_2020}. We also analyze the typical loop properties by comparing them with the zero-dimensional (0D) hydrodynamic model Enthalpy-Based Thermal Evolution of Loops \citep[EBTEL, ][]{klimchuk_2008}. We explore two heating scenarios. In the first one, we apply a constant heating rate assuming that typical loops are in quasi-static equilibrium. In the second scenario we heat the plasma in the loops using short impulsive events. We find that the reconstructed typical loops are overdense with respect to quasi-static equilibrium solutions of the hydrodynamic model. Impulsive heating, on the other hand, reproduces better the observed densities and temperatures for the shorter and approximately semicircular loops.
△ Less
Submitted 20 June, 2022;
originally announced June 2022.
-
Recent Progress and Next Steps for the MATHUSLA LLP Detector
Authors:
Cristiano Alpigiani,
Juan Carlos Arteaga-Velázquez,
Austin Ball,
Liron Barak,
Jared Barron,
Brian Batell,
James Beacham,
Yan Benhammo,
Benjamin Brau,
Karen Salomé Caballero-Mora,
Paolo Camarri,
Roberto Cardarelli,
John Paul Chou,
Wentao Cui,
David Curtin,
Miriam Diamond,
Keith R. Dienes,
Liam Andrew Dougherty,
William Dougherty,
Marco Drewes,
Sameer Erramilli,
Rouven Essig,
Erez Etzion,
Jared Evans,
Arturo Fernández Téllez
, et al. (71 additional authors not shown)
Abstract:
We report on recent progress and next steps in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC as part of the Snowmass 2021 process. Our understanding of backgrounds has greatly improved, aided by detailed simulation studies, and significant R&D has been performed on designing the scintillator detectors and understanding their performance. The collaboration is…
▽ More
We report on recent progress and next steps in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC as part of the Snowmass 2021 process. Our understanding of backgrounds has greatly improved, aided by detailed simulation studies, and significant R&D has been performed on designing the scintillator detectors and understanding their performance. The collaboration is on track to complete a Technical Design Report, and there are many opportunities for interested new members to contribute towards the goal of designing and constructing MATHUSLA in time for HL-LHC collisions, which would increase the sensitivity to a large variety of highly motivated LLP signals by orders of magnitude.
△ Less
Submitted 30 March, 2023; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Low-Cost Access to the Deep, High-Cadence Sky: the Argus Optical Array
Authors:
Nicholas M. Law,
Hank Corbett,
Nathan W. Galliher,
Ramses Gonzalez,
Alan Vasquez,
Glenn Walters,
Lawrence Machia,
Jeff Ratzloff,
Kendall Ackley,
Chris Bizon,
Christopher Clemens,
Steven Cox,
Steven Eikenberry,
Ward S. Howard,
Amy Glazier,
Andrew W. Mann,
Robert Quimby,
Daniel Reichart,
David Trilling
Abstract:
New mass-produced, wide-field, small-aperture telescopes have the potential to revolutionize ground-based astronomy by greatly reducing the cost of collecting area. In this paper, we introduce a new class of large telescope based on these advances: an all-sky, arcsecond-resolution, 1000-telescope array which builds a simultaneously high-cadence and deep survey by observing the entire sky all night…
▽ More
New mass-produced, wide-field, small-aperture telescopes have the potential to revolutionize ground-based astronomy by greatly reducing the cost of collecting area. In this paper, we introduce a new class of large telescope based on these advances: an all-sky, arcsecond-resolution, 1000-telescope array which builds a simultaneously high-cadence and deep survey by observing the entire sky all night. As a concrete example, we describe the Argus Array, a 5m-class telescope with an all-sky field of view and the ability to reach extremely high cadences using low-noise CMOS detectors. Each 55 GPix Argus exposure covers 20% of the entire sky to g=19.6 each minute and g=21.9 each hour; a high-speed mode will allow sub-second survey cadences for short times. Deep coadds will reach g=23.6 every five nights over 47% of the sky; a larger-aperture array telescope, with an étendue close to the Rubin Observatory, could reach g=24.3 in five nights. These arrays can build two-color, million-epoch movies of the sky, enabling sensitive and rapid searches for high-speed transients, fast-radio-burst counterparts, gravitational-wave counterparts, exoplanet microlensing events, occultations by distant solar system bodies, and myriad other phenomena. An array of O(1,000) telescopes, however, would be one of the most complex astronomical instruments yet built. Standard arrays with hundreds of tracking mounts entail thousands of moving parts and exposed optics, and maintenance costs would rapidly outpace the mass-produced-hardware cost savings compared to a monolithic large telescope. We discuss how to greatly reduce operations costs by placing all optics in a thermally controlled, sealed dome with a single moving part. Coupled with careful software scope control and use of existing pipelines, we show that the Argus Array could become the deepest and fastest Northern sky survey, with total costs below $20M.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Revisiting the HD 21749 Planetary System with Stellar Activity Modeling
Authors:
Tianjun Gan,
Sharon Xuesong Wang,
Johanna K. Teske,
Shude Mao,
Ward S. Howard,
Nicholas M. Law,
Natasha E. Batalha,
Andrew Vanderburg,
Diana Dragomir,
Chelsea X. Huang,
Fabo Feng,
R. Paul Butler,
Jeffrey D. Crane,
Stephen A. Shectman,
Yuri Beletsky,
Avi Shporer,
Benjamin T. Montet,
Jennifer A. Burt,
Adina D. Feinstein,
Erin Flowers,
Sangeetha Nandakumar,
Mauro Barbieri,
Hank Corbett,
Jeffrey K. Ratzloff,
Nathan Galliher
, et al. (4 additional authors not shown)
Abstract:
HD 21749 is a bright ($V=8.1$ mag) K dwarf at 16 pc known to host an inner terrestrial planet HD 21749c as well as an outer sub-Neptune HD 21749b, both delivered by TESS. Follow-up spectroscopic observations measured the mass of HD 21749b to be $22.7\pm2.2\ M_{\oplus}$ with a density of $7.0^{+1.6}_{-1.3}$ g~cm$^{-3}$, making it one of the densest sub-Neptunes. However, the mass measurement was su…
▽ More
HD 21749 is a bright ($V=8.1$ mag) K dwarf at 16 pc known to host an inner terrestrial planet HD 21749c as well as an outer sub-Neptune HD 21749b, both delivered by TESS. Follow-up spectroscopic observations measured the mass of HD 21749b to be $22.7\pm2.2\ M_{\oplus}$ with a density of $7.0^{+1.6}_{-1.3}$ g~cm$^{-3}$, making it one of the densest sub-Neptunes. However, the mass measurement was suspected to be influenced by stellar rotation. Here we present new high-cadence PFS RV data to disentangle the stellar activity signal from the planetary signal. We find that HD 21749 has a similar rotational timescale as the planet's orbital period, and the amplitude of the planetary orbital RV signal is estimated to be similar to that of the stellar activity signal. We perform Gaussian Process (GP) regression on the photometry and RVs from HARPS and PFS to model the stellar activity signal. Our new models reveal that HD 21749b has a radius of $2.86\pm0.20\ R_{\oplus}$, an orbital period of $35.6133\pm0.0005$ d with a mass of $M_{b}=20.0\pm2.7\ M_{\oplus}$ and a density of $4.8^{+2.0}_{-1.4}$ g~cm$^{-3}$ on an eccentric orbit with $e=0.16\pm0.06$, which is consistent with the most recent values published for this system. HD 21749c has an orbital period of $7.7902\pm0.0006$ d, a radius of $1.13\pm0.10\ R_{\oplus}$, and a 3$σ$ mass upper limit of $3.5\ M_{\oplus}$. Our Monte Carlo simulations confirm that without properly taking stellar activity signals into account, the mass measurement of HD 21749b is likely to arrive at a significantly underestimated error bar.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Three-Dimensional Reconstruction and Thermal Modelling of Observed Loops
Authors:
F. A. Nuevo,
C. Mac Cormack,
M. López Fuentes,
A. M. Vásquez,
C. H. Mandrini
Abstract:
Due to their characteristic temperature and density, loop structures in active regions (ARs) can be seen bright in extreme ultraviolet (EUV) and soft X-ray images. The semiempirical determination of the three-dimensional (3D) distribution of basic physical parameters (electronic density and temperature, and magnetic field) is a key constraint for coronal heating models. In this work we develop a t…
▽ More
Due to their characteristic temperature and density, loop structures in active regions (ARs) can be seen bright in extreme ultraviolet (EUV) and soft X-ray images. The semiempirical determination of the three-dimensional (3D) distribution of basic physical parameters (electronic density and temperature, and magnetic field) is a key constraint for coronal heating models. In this work we develop a technique for the study of EUV bright loops based on differential emission measure (DEM) analysis and we first apply it to AR structures observed by the {Atmospheric Imaging Assembly} (AIA) on board the {Solar Dynamics Observatory} (SDO). The 3D structure and intensity of the magnetic field of the observed EUV loops are modelled using force-free field extrapolations based on magnetograms taken by the {Helioseismic and Magnetic Imager} (HMI) on board SDO. In this work we report the results obtained for several bright loops identified in different ARs. Our analysis indicates that the mean and width of the temperature distributions are nearly invariant along the loop lengths. For a particular loop we study its temporal evolution and find that these characteristics remain approximately constant for most of its life time. The appearance and disappearance of this loop occurs at time-scales much shorter than its life time of $\approx 2.5$ hours. The results of this analysis are compared with numerical simulations using the zero-dimensional (0D) hydrodynamic model, Enthalpy-Based Thermal Evolution of Loops (EBTEL). We study two alternative heating scenarios: first, we apply a constant heating rate assuming loops in quasi-static equilibrium, and second, we heat the loops using impulsive events or nanoflares. We find that all the observed loops are overdense with respect to a quasi-static equilibrium solution and that the nanoflare heating better reproduces the observed densities and temperatures.
△ Less
Submitted 18 November, 2020;
originally announced November 2020.
-
Study of the spatial association between an active region jet and a nonthermal type~${\rm III}$ radio burst
Authors:
Sargam M. Mulay,
Rohit Sharma,
Gherardo Valori,
Alberto M. Vásquez,
Giulio Del Zanna,
Helen Mason,
Divya Oberoi
Abstract:
We aim to investigate the spatial location of the source of an active region (AR) jet and its relation with associated nonthermal type~III radio emission. An emission measure (EM) method was used to study the thermodynamic nature of the AR jet. The nonthermal type~{\rm III} radio burst observed at meterwavelength was studied using the Murchison Widefield Array (MWA) radio imaging and spectroscopic…
▽ More
We aim to investigate the spatial location of the source of an active region (AR) jet and its relation with associated nonthermal type~III radio emission. An emission measure (EM) method was used to study the thermodynamic nature of the AR jet. The nonthermal type~{\rm III} radio burst observed at meterwavelength was studied using the Murchison Widefield Array (MWA) radio imaging and spectroscopic data. The local configuration of the magnetic field and the connectivity of the source region of the jet with open magnetic field structures was studied using a nonlinear force-free field (NLFFF) extrapolation and potential field source surface (PFSS) extrapolation respectively. The plane-of-sky velocity of the AR jet was found to be $\sim$136~km/s. The EM analysis confirmed the presence of low temperature 2~MK plasma for the spire, whereas hot plasma, between 5-8 MK, was present at the footpoint region which also showed the presence of Fe~{\sc xviii} emission. A lower limit on the electron number density was found to be 1.4$\times$10$^{8}$ cm$^{-3}$ for the spire and 2.2$\times$10$^{8}$~cm$^{-3}$ for the footpoint. A temporal and spatial correlation between the AR jet and nonthermal type III burst confirmed the presence of open magnetic fields. An NLFFF extrapolation showed that the photospheric footpoints of the null point were anchored at the location of the source brightening of the jet. The spatial location of the radio sources suggests an association with the extrapolated closed and open magnetic fields although strong propagation effects are also present. The multi-scale analysis of the field at local, AR, and solar scales confirms the interlink between different flux bundles involved in the generation of the type III radio signal with flux transferred from a small coronal hole to the periphery of the sunspot via null point reconnection with an emerging structure.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
An Update to the Letter of Intent for MATHUSLA: Search for Long-Lived Particles at the HL-LHC
Authors:
Cristiano Alpigiani,
Juan Carlos Arteaga-Velázquez,
Austin Ball,
Liron Barak,
Jared Barron,
Brian Batell,
James Beacham,
Yan Benhammo,
Karen Salomé Caballero-Mora,
Paolo Camarri,
Roberto Cardarelli,
John Paul Chou,
Wentao Cui,
David Curtin,
Miriam Diamond,
Keith R. Dienes,
Liam Andrew Dougherty,
Giuseppe Di Sciascio,
Marco Drewes,
Erez Etzion,
Rouven Essig,
Jared Evans,
Arturo Fernández Téllez,
Oliver Fischer,
Jim Freeman
, et al. (58 additional authors not shown)
Abstract:
We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m…
▽ More
We report on recent progress in the design of the proposed MATHUSLA Long Lived Particle (LLP) detector for the HL-LHC, updating the information in the original Letter of Intent (LoI), see CDS:LHCC-I-031, arXiv:1811.00927. A suitable site has been identified at LHC Point 5 that is closer to the CMS Interaction Point (IP) than assumed in the LoI. The decay volume has been increased from 20 m to 25 m in height. Engineering studies have been made in order to locate much of the decay volume below ground, bringing the detector even closer to the IP. With these changes, a 100 m x 100 m detector has the same physics reach for large c$τ$ as the 200 m x 200 m detector described in the LoI and other studies. The performance for small c$τ$ is improved because of the proximity to the IP. Detector technology has also evolved while retaining the strip-like sensor geometry in Resistive Plate Chambers (RPC) described in the LoI. The present design uses extruded scintillator bars read out using wavelength shifting fibers and silicon photomultipliers (SiPM). Operations will be simpler and more robust with much lower operating voltages and without the use of greenhouse gases. Manufacturing is straightforward and should result in cost savings. Understanding of backgrounds has also significantly advanced, thanks to new simulation studies and measurements taken at the MATHUSLA test stand operating above ATLAS in 2018. We discuss next steps for the MATHUSLA collaboration, and identify areas where new members can make particularly important contributions.
△ Less
Submitted 3 September, 2020;
originally announced September 2020.
-
Thermodynamic Structure of the Solar Corona: Tomographic Reconstructions and MHD Modeling
Authors:
D. G. Lloveras,
A. M. Vásquez,
F. A. Nuevo,
C. Mac Cormack,
N. Sachdeva,
W. Manchester IV,
B. Van der Holst,
R. A. Frazin
Abstract:
We carry out a study of the global three-dimensional (3D) structure of the electron density and temperature of the quiescent inner solar corona ($r<1.25 R_\odot$) by means of tomographic reconstructions and magnetohydrodynamic simulations. We use differential emission measure tomography (DEMT) and the Alfvén Wave Solar Model (AWSoM), in their latest versions. Two target rotations were selected fro…
▽ More
We carry out a study of the global three-dimensional (3D) structure of the electron density and temperature of the quiescent inner solar corona ($r<1.25 R_\odot$) by means of tomographic reconstructions and magnetohydrodynamic simulations. We use differential emission measure tomography (DEMT) and the Alfvén Wave Solar Model (AWSoM), in their latest versions. Two target rotations were selected from the solar minimum between solar cycles (SCs) 23 and 24 and the declining phase of SC 24. We report in quantitative detail on the 3D thermodynamic structure of the core and outer layers of the streamer belt, and of the high latitude coronal holes (CH), as revealed by the DEMT analysis. We report on the presence of two types of structures within the streamer belt, loops with temperature decreasing/increasing with height (dubbed down/up loops), as reported first in previous DEMT studies. We also estimate the heating energy flux required at the coronal base to keep these structures stable, found to be or order $10^5 erg\, cm^{-2} s^{-1}$, consistently with previous DEMT and spectroscopic studies. We discuss how these findings are consistent with coronal dissipation of Alfvén waves. We compare the 3D results of DEMT and AWSoM in distinct magnetic structures. We show that the agreement between the products of both techniques is the best so far, with an overall agreement $\lesssim 20\%$, depending on the target rotation and the specific coronal region. In its current implementation the ASWsoM model can not reproduce down loops though. Also, in the source region of the fast and slow components of the solar wind, the electron density of the AWSoM model increases with latitude, opposite to the trend observed in DEMT reconstructions.
△ Less
Submitted 14 April, 2020;
originally announced April 2020.
-
Validation of the Alfvén Wave Solar atmosphere Model (AWSoM) with Observations from the Low Corona to 1 AU
Authors:
N. Sachdeva,
B. van der Holst,
W. B. Manchester,
G. Tóth,
Y. Chen,
D. G. Lloveras,
A. M. Vásquez,
Philippe Lamy,
Julien Wojak,
B. V. Jackson,
H. -S. Yu,
C. J. Henney
Abstract:
We perform a validation study of the latest version of the Alfvén Wave Solar atmosphere Model (AWSoM) within the Space Weather Modeling Framework (SWMF). To do so, we compare the simulation results of the model with a comprehensive suite of observations for Carrington rotations representative of the solar minimum conditions extending from the solar corona to the heliosphere up to the Earth. In the…
▽ More
We perform a validation study of the latest version of the Alfvén Wave Solar atmosphere Model (AWSoM) within the Space Weather Modeling Framework (SWMF). To do so, we compare the simulation results of the model with a comprehensive suite of observations for Carrington rotations representative of the solar minimum conditions extending from the solar corona to the heliosphere up to the Earth. In the low corona ($r < 1.25$ \Rs), we compare with EUV images from both STEREO-A/EUVI and SDO/AIA and to three-dimensional (3-D) tomographic reconstructions of the electron temperature and density based on these same data. We also compare the model to tomographic reconstructions of the electron density from SOHO/LASCO observations ($2.55 < r < 6.0$\Rs). In the heliosphere, we compare model predictions of solar wind speed with velocity reconstructions from InterPlanetary Scintillation (IPS) observations. For comparison with observations near the Earth, we use OMNI data. Our results show that the improved AWSoM model performs well in quantitative agreement with the observations between the inner corona and 1 AU. The model now reproduces the fast solar wind speed in the polar regions. Near the Earth, our model shows good agreement with observations of solar wind velocity, proton temperature and density. AWSoM offers an extensive application to study the solar corona and larger heliosphere in concert with current and future solar missions as well as being well suited for space weather predictions.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Contributions of the LAGO Collaboration to the 36th ICRC
Authors:
A. Alberto,
W. Alvarez,
L. Ancari,
M. Andrade Uzieda,
R. Arceo,
O. Areso,
L. H. Arnaldi,
H. Asorey,
M. Audelo,
E. Berazaín,
X. Bertou,
M. J. Bonilla-Rosales,
K. S. Caballero-Mora,
R. Calderón-Ardila,
C. A. Calle García,
J. Campelo,
A. Campos-Fauth,
J. Cando,
A. Carramiñana,
E. Carrasco-Licea,
E. Carrera,
C. Castromonte-Flores,
D. Cazar,
D. Cogollo,
R. Conde-Sanchez
, et al. (68 additional authors not shown)
Abstract:
The LAGO (Latin American Giant Observatory) observatory is an experiment that spans over Latin America in a wide range of latitudes that gives different rigidity cut offs for the enter of cosmic rays in the atmosphere. The motivation of the Observatory is to study atmospheric radiation and space weather through the measurement of the secondary emission of low energy cosmic rays at ground level usi…
▽ More
The LAGO (Latin American Giant Observatory) observatory is an experiment that spans over Latin America in a wide range of latitudes that gives different rigidity cut offs for the enter of cosmic rays in the atmosphere. The motivation of the Observatory is to study atmospheric radiation and space weather through the measurement of the secondary emission of low energy cosmic rays at ground level using Water Cherenkov Detectors (WCD). This work presents the contributions of the LAGO collaboration to the 2019 36th ICRC.
△ Less
Submitted 22 September, 2019;
originally announced September 2019.
-
On $(t,r)$ broadcast domination of certain grid graphs
Authors:
Natasha Crepeau,
Pamela E. Harris,
Sean Hays,
Marissa Loving,
Joseph Rennie,
Gordon Rojas Kirby,
Alexandro Vasquez
Abstract:
Let $G=( V(G), E(G) )$ be a connected graph with vertex set $V(G)$ and edge set $E(G)$. We say a subset $D$ of $V(G)$ dominates $G$ if every vertex in $V \setminus D$ is adjacent to a vertex in $D$. A generalization of this concept is $(t,r)$ broadcast domination. We designate certain vertices to be towers of signal strength $t$, which send out signal to neighboring vertices with signal strength d…
▽ More
Let $G=( V(G), E(G) )$ be a connected graph with vertex set $V(G)$ and edge set $E(G)$. We say a subset $D$ of $V(G)$ dominates $G$ if every vertex in $V \setminus D$ is adjacent to a vertex in $D$. A generalization of this concept is $(t,r)$ broadcast domination. We designate certain vertices to be towers of signal strength $t$, which send out signal to neighboring vertices with signal strength decaying linearly as the signal traverses the edges of the graph. We let $\mathbb{T}$ be the set of all towers, and we define the signal received by a vertex $v\in V(G)$ from a tower $w \in \mathbb T$ to be $f(v)=\sum_{w\in \mathbb{T}}max(0,t-d(v,w))$. Blessing, Insko, Johnson, Mauretour (2014) defined a $(t,r)$ broadcast dominating set, or a $(t,r) $ broadcast, on $G$ as a set $\mathbb{T} \subseteq V(G) $ such that $f(v)\geq r$ for all $v\in V(G)$. The minimal cardinality of a $(t, r)$ broadcast on $G$ is called the $(t, r)$ broadcast domination number of $G$. In this paper, we present our research on the $(t,r)$ broadcast domination number for certain graphs including paths, grid graphs, the slant lattice, and the king's lattice.
△ Less
Submitted 22 June, 2023; v1 submitted 16 August, 2019;
originally announced August 2019.
-
Pattern formation induced by intraspecific interactions in a predator-prey system
Authors:
Luciano Stucchi,
Javier Galeano,
Desiderio A. Vasquez
Abstract:
Differential diffusion is a source of instability in population dynamics systems when species diffuse with different rates. Predator-prey systems show this instability only under certain specific conditions, usually requiring Holling-type functionals involved. Here we study the effects of intraspecific cooperation and competition on diffusion-driven instability in a predator-prey system with a dif…
▽ More
Differential diffusion is a source of instability in population dynamics systems when species diffuse with different rates. Predator-prey systems show this instability only under certain specific conditions, usually requiring Holling-type functionals involved. Here we study the effects of intraspecific cooperation and competition on diffusion-driven instability in a predator-prey system with a different structure. We conduct the analysis on a generalized population dynamics that bounds intraspecific and interspecific interactions with Verhulst-type saturation terms instead of Holling-type functionals. We find that instability occurs due to the intraspecific saturation or intraspecific interactions, both cooperative and competitive. We present numerical simulations and show spatial patterns due to diffusion.
△ Less
Submitted 17 May, 2019;
originally announced May 2019.
-
Micro-Structuring, Ablation and Defect Generation in Graphene with Femtosecond Pulses
Authors:
Andres Vasquez,
Panagis Samolis,
Junjie Zeng,
Michelle Y Sander
Abstract:
Femtosecond micromachining offers a contact-free and mask-less technique for material patterning. With ultrafast laser irradiation, permanent modifications to the properties of single layer graphene through material ablation or defect introduction can be induced. Multiple femtosecond pulse interactions with a single layer graphene are studied and a low laser ablation threshold ~9.2 mJ/cm2 is repor…
▽ More
Femtosecond micromachining offers a contact-free and mask-less technique for material patterning. With ultrafast laser irradiation, permanent modifications to the properties of single layer graphene through material ablation or defect introduction can be induced. Multiple femtosecond pulse interactions with a single layer graphene are studied and a low laser ablation threshold ~9.2 mJ/cm2 is reported for a 15 second illumination time. Clean ablated structures are generated in such a multi pulse irradiation configuration at low pulse energies as an attractive alternative to ablation with single femtosecond, high energy pulses. For a fully ablated graphene hole, a radially symmetric region extending around 2 um from the ablated edge is characterized by strong defect generation. Average distances between point-defects down to ~58 nm are derived and Raman spectroscopy implies that overall there is a strong resemblance to amorphous structures. For fluence values around 75% of the ablation threshold, modification with defect generation down to ~48 nm average defects lengths is reported, while the underlying graphene structure is maintained. Thus, depending on the laser parameter choice, the same laser configuration can be used to ablate graphene or to primarily introduce defect states. The presented findings offer interesting insights into femtosecond induced structural modifications of graphene that can lead to improved precision ablation and patterning of single-layer materials at the micro- and nano-scale. Further, this can be attractive for graphene or carbon-based device fabrication as well as sensor and transistor applications, where regions of varying carrier concentrations and different electrical, optical or physical properties are desired.
△ Less
Submitted 28 February, 2019;
originally announced March 2019.
-
New Physics in Double Higgs Production at Future $e^+ e^-$ Colliders
Authors:
Andres Vasquez,
Celine Degrande,
Alberto Tonero,
Rogerio Rosenfeld
Abstract:
We study the effects of new physics in double Higgs production at future $e^+ e^-$ colliders. In the Standard Model the chiral limit ($m_e=0$) plays an important role for this process, being responsible for the smallness of the tree-level diagrams with respect to the 1-loop contributions. In our work, we consider the possibility of an enhancement due to the contribution of Standard Model dimension…
▽ More
We study the effects of new physics in double Higgs production at future $e^+ e^-$ colliders. In the Standard Model the chiral limit ($m_e=0$) plays an important role for this process, being responsible for the smallness of the tree-level diagrams with respect to the 1-loop contributions. In our work, we consider the possibility of an enhancement due to the contribution of Standard Model dimension-six effective operators. We show that there are only two relevant operators for this process that are not yet (strongly) constrained by other data. We perform a sensitivity study on the operator coefficients for several benchmark values of energy and integrated luminosity related to the proposed linear colliders such as CLIC, ILC and FCC-ee and we derive expected 95% CL limits for each benchmark scenario.
△ Less
Submitted 4 February, 2019; v1 submitted 17 January, 2019;
originally announced January 2019.
-
MATHUSLA: A Detector Proposal to Explore the Lifetime Frontier at the HL-LHC
Authors:
Henry Lubatti,
Cristiano Alpigiani,
Juan Carlos Arteaga-Velázquez,
Austin Ball,
Liron Barak James Beacham,
Yan Benhammo,
Karen Salomé Caballero-Mora,
Paolo Camarri,
Tingting Cao,
Roberto Cardarelli,
John Paul Chou,
David Curtin,
Albert de Roeck,
Giuseppe Di Sciascio,
Miriam Diamond,
Marco Drewes,
Sarah C. Eno,
Rouven Essig,
Jared Evans,
Erez Etzion,
Arturo Fernández Téllez,
Oliver Fischer,
Jim Freeman,
Stefano Giagu,
Brandon Gomes
, et al. (38 additional authors not shown)
Abstract:
The observation of long-lived particles at the LHC would reveal physics beyond the Standard Model, could account for the many open issues in our understanding of our universe, and conceivably point to a more complete theory of the fundamental interactions. Such long-lived particle signatures are fundamentally motivated and can appear in virtually every theoretical construct that address the Hierar…
▽ More
The observation of long-lived particles at the LHC would reveal physics beyond the Standard Model, could account for the many open issues in our understanding of our universe, and conceivably point to a more complete theory of the fundamental interactions. Such long-lived particle signatures are fundamentally motivated and can appear in virtually every theoretical construct that address the Hierarchy Problem, Dark Matter, Neutrino Masses and the Baryon Asymmetry of the Universe. We describe in this document a large detector, MATHUSLA, located on the surface above an HL-LHC $pp$ interaction point, that could observe long-lived particles with lifetimes up to the Big Bang Nucleosynthesis limit of 0.1 s. We also note that its large detector area allows MATHUSLA to make important contributions to cosmic ray physics. Because of the potential for making a major breakthrough in our conceptual understanding of the universe, long-lived particle searches should have the highest level of priority.
△ Less
Submitted 13 January, 2019;
originally announced January 2019.
-
A Letter of Intent for MATHUSLA: a dedicated displaced vertex detector above ATLAS or CMS
Authors:
Cristiano Alpigiani,
Austin Ball,
Liron Barak,
James Beacham,
Yan Benhammo,
Tingting Cao,
Paolo Camarri,
Roberto Cardarelli,
Mario Rodriguez-Cahuantzi,
John Paul Chou,
David Curtin,
Miriam Diamond,
Giuseppe Di Sciascio,
Marco Drewes,
Sarah C. Eno,
Erez Etzion,
Rouven Essig,
Jared Evans,
Oliver Fischer,
Stefano Giagu,
Brandon Gomes,
Andy Haas,
Yuekun Heng,
Giuseppe Iaselli,
Ken Johns
, et al. (39 additional authors not shown)
Abstract:
In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particle…
▽ More
In this Letter of Intent (LOI) we propose the construction of MATHUSLA (MAssive Timing Hodoscope for Ultra-Stable neutraL pArticles), a dedicated large-volume displaced vertex detector for the HL-LHC on the surface above ATLAS or CMS. Such a detector, which can be built using existing technologies with a reasonable budget in time for the HL-LHC upgrade, could search for neutral long-lived particles (LLPs) with up to several orders of magnitude better sensitivity than ATLAS or CMS, while also acting as a cutting-edge cosmic ray telescope at CERN to explore many open questions in cosmic ray and astro-particle physics. We review the physics motivations for MATHUSLA and summarize its LLP reach for several different possible detector geometries, as well as outline the cosmic ray physics program. We present several updated background studies for MATHUSLA, which help inform a first detector-design concept utilizing modular construction with Resistive Plate Chambers (RPCs) as the primary tracking technology. We present first efficiency and reconstruction studies to verify the viability of this design concept, and we explore some aspects of its total cost. We end with a summary of recent progress made on the MATHUSLA test stand, a small-scale demonstrator experiment currently taking data at CERN Point 1, and finish with a short comment on future work.
△ Less
Submitted 2 November, 2018;
originally announced November 2018.
-
Long-Lived Particles at the Energy Frontier: The MATHUSLA Physics Case
Authors:
David Curtin,
Marco Drewes,
Matthew McCullough,
Patrick Meade,
Rabindra N. Mohapatra,
Jessie Shelton,
Brian Shuve,
Elena Accomando,
Cristiano Alpigiani,
Stefan Antusch,
Juan Carlos Arteaga-Velázquez,
Brian Batell,
Martin Bauer,
Nikita Blinov,
Karen Salomé Caballero-Mora,
Jae Hyeok Chang,
Eung ** Chun,
Raymond T. Co,
Timothy Cohen,
Peter Cox,
Nathaniel Craig,
Csaba Csáki,
Yanou Cui,
Francesco D'Eramo,
Luigi Delle Rose
, et al. (63 additional authors not shown)
Abstract:
We examine the theoretical motivations for long-lived particle (LLP) signals at the LHC in a comprehensive survey of Standard Model (SM) extensions. LLPs are a common prediction of a wide range of theories that address unsolved fundamental mysteries such as naturalness, dark matter, baryogenesis and neutrino masses, and represent a natural and generic possibility for physics beyond the SM (BSM). I…
▽ More
We examine the theoretical motivations for long-lived particle (LLP) signals at the LHC in a comprehensive survey of Standard Model (SM) extensions. LLPs are a common prediction of a wide range of theories that address unsolved fundamental mysteries such as naturalness, dark matter, baryogenesis and neutrino masses, and represent a natural and generic possibility for physics beyond the SM (BSM). In most cases the LLP lifetime can be treated as a free parameter from the $μ$m scale up to the Big Bang Nucleosynthesis limit of $\sim 10^7$m. Neutral LLPs with lifetimes above $\sim$ 100m are particularly difficult to probe, as the sensitivity of the LHC main detectors is limited by challenging backgrounds, triggers, and small acceptances. MATHUSLA is a proposal for a minimally instrumented, large-volume surface detector near ATLAS or CMS. It would search for neutral LLPs produced in HL-LHC collisions by reconstructing displaced vertices (DVs) in a low-background environment, extending the sensitivity of the main detectors by orders of magnitude in the long-lifetime regime. In this white paper we study the LLP physics opportunities afforded by a MATHUSLA-like detector at the HL-LHC. We develop a model-independent approach to describe the sensitivity of MATHUSLA to BSM LLP signals, and compare it to DV and missing energy searches at ATLAS or CMS. We then explore the BSM motivations for LLPs in considerable detail, presenting a large number of new sensitivity studies. While our discussion is especially oriented towards the long-lifetime regime at MATHUSLA, this survey underlines the importance of a varied LLP search program at the LHC in general. By synthesizing these results into a general discussion of the top-down and bottom-up motivations for LLP searches, it is our aim to demonstrate the exceptional strength and breadth of the physics case for the construction of the MATHUSLA detector.
△ Less
Submitted 5 March, 2019; v1 submitted 19 June, 2018;
originally announced June 2018.
-
Deep Detection of People and their Mobility Aids for a Hospital Robot
Authors:
Andres Vasquez,
Marina Kollmitz,
Andreas Eitel,
Wolfram Burgard
Abstract:
Robots operating in populated environments encounter many different types of people, some of whom might have an advanced need for cautious interaction, because of physical impairments or their advanced age. Robots therefore need to recognize such advanced demands to provide appropriate assistance, guidance or other forms of support. In this paper, we propose a depth-based perception pipeline that…
▽ More
Robots operating in populated environments encounter many different types of people, some of whom might have an advanced need for cautious interaction, because of physical impairments or their advanced age. Robots therefore need to recognize such advanced demands to provide appropriate assistance, guidance or other forms of support. In this paper, we propose a depth-based perception pipeline that estimates the position and velocity of people in the environment and categorizes them according to the mobility aids they use: pedestrian, person in wheelchair, person in a wheelchair with a person pushing them, person with crutches and person using a walker. We present a fast region proposal method that feeds a Region-based Convolutional Network (Fast R-CNN). With this, we speed up the object detection process by a factor of seven compared to a dense sliding window approach. We furthermore propose a probabilistic position, velocity and class estimator to smooth the CNN's detections and account for occlusions and misclassifications. In addition, we introduce a new hospital dataset with over 17,000 annotated RGB-D images. Extensive experiments confirm that our pipeline successfully keeps track of people and their mobility aids, even in challenging situations with multiple people from different categories and frequent occlusions. Videos of our experiments and the dataset are available at http://www2.informatik.uni-freiburg.de/~kollmitz/MobilityAids
△ Less
Submitted 2 August, 2017;
originally announced August 2017.
-
Energy Input Flux in the Global Quiet-Sun Corona
Authors:
C. Mac Cormack,
A. M. Vásquez,
M. López Fuentes,
F. A. Nuevo,
E. Landi,
R. A. Frazin
Abstract:
We present first results of a novel technique that provides, for the first time, constraints on the energy input flux at the coronal base ($r\sim\,1.025\,{\rm R}_\odot$) of the quiet-Sun at a global scale. By combining differential emission measure tomography (DEMT) of EUV images, with global models of the coronal magnetic field, we estimate the energy input flux at the coronal base that is requir…
▽ More
We present first results of a novel technique that provides, for the first time, constraints on the energy input flux at the coronal base ($r\sim\,1.025\,{\rm R}_\odot$) of the quiet-Sun at a global scale. By combining differential emission measure tomography (DEMT) of EUV images, with global models of the coronal magnetic field, we estimate the energy input flux at the coronal base that is required to maintain thermodynamically stable structures. The technique is described in detail and first applied to data provided by the Extreme Ultraviolet Imager (EUVI) instrument, on board the Solar TErrestrial RElations Observatory (STEREO) mission, and the Atmospheric Imaging Assembly (AIA) instrument, on board the Solar Dynamics Observatory (SDO) mission, for two solar rotations with different levels of activity. Our analysis indicates that the typical energy input flux at the coronal base of magnetic loops in the quiet-Sun is in the range $\sim\,0.5-2.0\times 10^5\,{\rm (erg\,sec^{-1}\,{\rm cm}^{-2})}$, depending on the structure size and level of activity. A large fraction of this energy input, or even its totality, could be accounted for by Alfvén waves, as shown by recent independent observational estimates derived from determinations of the non-thermal broadening of spectral lines in the coronal base of quiet-Sun regions. This new tomography product will be useful for validation of coronal heating models in magnetohydrodinamic simulations of the global corona.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Measuring the magnetic field of a trans-equatorial loop system using coronal seismology
Authors:
David M. Long,
Gherardo Valori,
David Pérez-Suárez,
Richard J. Morton,
Alberto Marcos Vásquez
Abstract:
"EIT waves" are freely-propagating global pulses in the low corona which are strongly associated with the initial evolution of coronal mass ejections (CMEs). They are thought to be large-amplitude, fast-mode magnetohydrodynamic waves initially driven by the rapid expansion of a CME in the low corona. An "EIT wave" was observed on 6 July 2012 to impact an adjacent trans-equatorial loop system which…
▽ More
"EIT waves" are freely-propagating global pulses in the low corona which are strongly associated with the initial evolution of coronal mass ejections (CMEs). They are thought to be large-amplitude, fast-mode magnetohydrodynamic waves initially driven by the rapid expansion of a CME in the low corona. An "EIT wave" was observed on 6 July 2012 to impact an adjacent trans-equatorial loop system which then exhibited a decaying oscillation as it returned to rest. Observations of the loop oscillations were used to estimate the magnetic field strength of the loop system by studying the decaying oscillation of the loop, measuring the propagation of ubiquitous transverse waves in the loop and extrapolating the magnetic field from observed magnetograms. Observations from the Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory (SDO/AIA) and the Coronal Multi-channel Polarimeter (CoMP) were used to study the event. An Empirical Mode Decomposition analysis was used to characterise the oscillation of the loop system in CoMP Doppler velocity and line width and in AIA intensity. The loop system was shown to oscillate in the 2nd harmonic mode rather than at the fundamental frequency, with the seismological analysis returning an estimated magnetic field strength of ~5.5+/-1.5 G. This compares to the magnetic field strength estimates of ~1-9 G and ~3-9 G found using the measurements of transverse wave propagation and magnetic field extrapolation respectively.
△ Less
Submitted 29 March, 2017;
originally announced March 2017.
-
Mass Loss Evolution in the EUV Low Corona from SDO/AIA Data
Authors:
Fernando M. López,
Hebe Cremades,
Federico A. Nuevo,
Laura A. Balmaceda,
Alberto A. Vásquez
Abstract:
We carry out an analysis of the evacuated mass from three coronal dimming regions observed by the {\it Atmospheric Imaging Assembly} (AIA) on board the {\it Solar Dynamics Observatory}. The three events are unambiguously identified with white-light coronal mass ejections (CMEs) associated in turn with surface activity of diverse nature: an impulsive (M-class) flare, a weak (B-class) flare and a fi…
▽ More
We carry out an analysis of the evacuated mass from three coronal dimming regions observed by the {\it Atmospheric Imaging Assembly} (AIA) on board the {\it Solar Dynamics Observatory}. The three events are unambiguously identified with white-light coronal mass ejections (CMEs) associated in turn with surface activity of diverse nature: an impulsive (M-class) flare, a weak (B-class) flare and a filament eruption without a flare. The use of three AIA coronal passbands allows applying a differential emission measure technique to define the dimming regions and identify their evacuated mass through the analysis of the electronic density depletion associated to the eruptions. The temporal evolution of the mass loss from the three dimmings can be approximated by an exponential equation followed by a linear fit. We determine the mass of the associated CMEs from COR2 data. The results show that the evacuated masses from the low corona represent a considerable amount of the mass of the CMEs. We also find that plasma is still being evacuated from the low corona at the time when the CMEs reach the COR2 field of view. The temporal evolution of the angular width of the CMEs, of the dimming regions in the low corona, and of the flux registered by GOES in soft X-rays are all in close relation with the behavior of mass evacuation from the low corona. We discuss the implications of our findings toward a better understanding of the temporal evolution of several parameters associated to the analyzed dimmings and CMEs.
△ Less
Submitted 2 November, 2016;
originally announced November 2016.
-
Maximum Likelihood Estimation for Single Particle, Passive Microrheology Data with Drift
Authors:
John W. R. Mellnik,
Martin Lysy,
Paula A. Vasquez,
Natesh S. Pillai,
David B. Hill,
Jeremy Crib,
Scott A. McKinley,
M. Gregory Forest
Abstract:
Volume limitations and low yield thresholds of biological fluids have led to widespread use of passive microparticle rheology. The mean-squared-displacement (MSD) statistics of bead position time series (bead paths) are either applied directly to determine the creep compliance [Xu et al (1998)] or transformed to determine dynamic storage and loss moduli [Mason & Weitz (1995)]. A prevalent hurdle a…
▽ More
Volume limitations and low yield thresholds of biological fluids have led to widespread use of passive microparticle rheology. The mean-squared-displacement (MSD) statistics of bead position time series (bead paths) are either applied directly to determine the creep compliance [Xu et al (1998)] or transformed to determine dynamic storage and loss moduli [Mason & Weitz (1995)]. A prevalent hurdle arises when there is a non-diffusive experimental drift in the data. Commensurate with the magnitude of drift relative to diffusive mobility, quantified by a Péclet number, the MSD statistics are distorted, and thus the path data must be "corrected" for drift. The standard approach is to estimate and subtract the drift from particle paths, and then calculate MSD statistics. We present an alternative, parametric approach using maximum likelihood estimation that simultaneously fits drift and diffusive model parameters from the path data; the MSD statistics (and consequently the compliance and dynamic moduli) then follow directly from the best-fit model. We illustrate and compare both methods on simulated path data over a range of Péclet numbers, where exact answers are known. We choose fractional Brownian motion as the numerical model because it affords tunable, sub-diffusive MSD statistics consistent with typical 30 second long, experimental observations of microbeads in several biological fluids. Finally, we apply and compare both methods on data from human bronchial epithelial cell culture mucus.
△ Less
Submitted 21 February, 2016; v1 submitted 10 September, 2015;
originally announced September 2015.
-
Parallel Evolution of Quasi-separatrix Layers and Active Region Upflows
Authors:
C. H. Mandrini,
D. Baker,
P. Démoulin,
G. D. Cristiani,
L. van Driel-Gesztelyi,
S. Vargas Domínguez,
F. A. Nuevo,
A. M. Vásquez,
M. Pick
Abstract:
Persistent plasma upflows were observed with Hinode's EUV Imaging Spectrometer (EIS) at the edges of active region (AR) 10978 as it crossed the solar disk. We analyze the evolution of the photospheric magnetic and velocity fields of the AR, model its coronal magnetic field, and compute the location of magnetic null-points and quasi-sepratrix layers (QSLs) searching for the origin of EIS upflows. M…
▽ More
Persistent plasma upflows were observed with Hinode's EUV Imaging Spectrometer (EIS) at the edges of active region (AR) 10978 as it crossed the solar disk. We analyze the evolution of the photospheric magnetic and velocity fields of the AR, model its coronal magnetic field, and compute the location of magnetic null-points and quasi-sepratrix layers (QSLs) searching for the origin of EIS upflows. Magnetic reconnection at the computed null points cannot explain all of the observed EIS upflow regions. However, EIS upflows and QSLs are found to evolve in parallel, both temporarily and spatially. Sections of two sets of QSLs, called outer and inner, are found associated to EIS upflow streams having different characteristics. The reconnection process in the outer QSLs is forced by a large-scale photospheric flow pattern which is present in the AR for several days. We propose a scenario in which upflows are observed provided a large enough asymmetry in plasma pressure exists between the pre-reconnection loops and for as long as a photospheric forcing is at work. A similar mechanism operates in the inner QSLs, in this case, it is forced by the emergence and evolution of the bipoles between the two main AR polarities. Our findings provide strong support to the results from previous individual case studies investigating the role of magnetic reconnection at QSLs as the origin of the upflowing plasma. Furthermore, we propose that persistent reconnection along QSLs does not only drive the EIS upflows, but it is also responsible for a continuous metric radio noise-storm observed in AR 10978 along its disk transit by the Nançay Radio Heliograph.
△ Less
Submitted 5 July, 2015;
originally announced July 2015.
-
Multimodal Differential Emission Measure in the Solar Corona
Authors:
Federico A. Nuevo,
Alberto M. Vásquez,
Enrico Landi,
Richard Frazin
Abstract:
The Atmospheric Imaging Assembly (AIA) telescope on board the Solar Dynamics Observatory (SDO) provides coronal EUV imaging over a broader temperature sensitivity range than the previous generations of instruments (EUVI, EIT, and TRACE). Differential emission measure tomography (DEMT) of the solar corona based on AIA data is presented here for the first time. The main product of DEMT is the three-…
▽ More
The Atmospheric Imaging Assembly (AIA) telescope on board the Solar Dynamics Observatory (SDO) provides coronal EUV imaging over a broader temperature sensitivity range than the previous generations of instruments (EUVI, EIT, and TRACE). Differential emission measure tomography (DEMT) of the solar corona based on AIA data is presented here for the first time. The main product of DEMT is the three-dimensional (3D) distribution of the local differential emission measure (LDEM). While in previous studies, based on EIT or EUVI data, there were 3 available EUV bands, with a sensitivity range $\sim 0.60 - 2.70$ MK, the present study is based on the 4 cooler AIA bands (aimed at studying the quiet sun), sensitive to the range $\sim 0.55 - 3.75$ MK. The AIA filters allow exploration of new parametric LDEM models. Since DEMT is better suited for lower activity periods, we use data from Carrington Rotation 2099, when the Sun was in its most quiescent state during the AIA mission. Also, we validate the parametric LDEM inversion technique by applying it to standard bi-dimensional (2D) differential emission measure (DEM) analysis on sets of simultaneous AIA images, and comparing the results with DEM curves obtained using other methods. Our study reveals a ubiquitous bimodal LDEM distribution in the quiet diffuse corona, which is stronger for denser regions. We argue that the nanoflare heating scenario is less likely to explain these results, and that alternative mechanisms, such as wave dissipation appear better supported by our results.
△ Less
Submitted 9 March, 2015;
originally announced March 2015.
-
Seeing The Solar Corona in Three Dimensions
Authors:
Alberto Marcos Vásquez
Abstract:
The large availability and rich spectral coverage of today's observational data of the solar corona, and the high spatial and temporal resolution of many instruments, has enabled the evolution of three-dimensional (3D) physical models to a great level of detail. However, the 3D information provided by the data is rather limited as every instrument observes from a single angle of vision, or two at…
▽ More
The large availability and rich spectral coverage of today's observational data of the solar corona, and the high spatial and temporal resolution of many instruments, has enabled the evolution of three-dimensional (3D) physical models to a great level of detail. However, the 3D information provided by the data is rather limited as every instrument observes from a single angle of vision, or two at the most in the case of the STEREO mission. Two powerful available observational techniques to infer detailed 3D information of the solar corona from empirical data are stereoscopy and tomography. In particular, the technique known as \emph{differential emission measure tomography} (DEMT) allows determination of the 3D distribution of the coronal electron density and temperature in the inner corona. This paper summarizes the main technical aspects of DEMT, reviews all published work based on it, and comments its future development and applications.
△ Less
Submitted 7 March, 2015;
originally announced March 2015.
-
A Steady-State Picture of Solar Wind Acceleration and Charge State Composition Derived from a Global Wave-Driven MHD Model
Authors:
Rona Oran,
Enrico Landi,
Bart van der Holst,
Susan T. Lepri,
Alberto M. Vásquez,
Federico. A. Nuevo,
Richard Frazin,
Ward B. Manchester IV,
Igor V. Sokolov,
Tamas I. Gombosi
Abstract:
The higher charge states found in slow ($<$400km s$^{-1}$) solar wind streams compared to fast streams have supported the hypothesis that the slow wind originates in closed coronal loops, and released intermittently through reconnection. Here we examine whether a highly ionized slow wind can also form along steady and open magnetic field lines. We model the steady-state solar atmosphere using AWSo…
▽ More
The higher charge states found in slow ($<$400km s$^{-1}$) solar wind streams compared to fast streams have supported the hypothesis that the slow wind originates in closed coronal loops, and released intermittently through reconnection. Here we examine whether a highly ionized slow wind can also form along steady and open magnetic field lines. We model the steady-state solar atmosphere using AWSoM, a global magnetohydrodynamic model driven by Alfv{é}n waves, and apply an ionization code to calculate the charge state evolution along modeled open field lines. This constitutes the first charge states calculation covering all latitudes in a realistic magnetic field. The ratios $O^{+7}/O^{+6}$ and $C^{+6}/C^{+5}$ are compared to in-situ Ulysses observations, and are found to be higher in the slow wind, as observed; however, they are under-predicted in both wind types. The modeled ion fractions of S, Si, and Fe are used to calculate line-of-sight intensities, which are compared to EIS observations above a coronal hole. The agreement is partial, and suggests that all ionization rates are under-predicted. Assuming the presence of suprathermal electrons improved the agreement with both EIS and Ulysses observations; importantly, the trend of higher ionization in the slow wind was maintained. The results suggest there can be a sub-class of slow wind that is steady and highly ionized. Further analysis shows it originates from coronal hole boundaries (CHB), where the modeled electron density and temperature are higher than inside the hole, leading to faster ionization. This property of CHBs is global, and observationally supported by EUV tomography.
△ Less
Submitted 29 December, 2014;
originally announced December 2014.
-
How Can Active Region Plasma Escape into the Solar Wind from below a Closed Helmet Streamer?
Authors:
C. H. Mandrini,
F. A. Nuevo,
A. M. Vásquez,
P. Démoulin,
L. van Driel-Gesztelyi,
D. Baker,
J. L. Culhane,
G. D. Cristiani,
M. Pick
Abstract:
Recent studies show that active-region (AR) upflowing plasma, observed by the EUV-Imaging Spectrometer (EIS), onboard Hinode, can gain access to open field-lines and be released into the solar wind (SW) via magnetic-interchange reconnection at magnetic null-points in pseudo-streamer configurations. When only one bipolar AR is present on the Sun and it is fully covered by the separatrix of a stream…
▽ More
Recent studies show that active-region (AR) upflowing plasma, observed by the EUV-Imaging Spectrometer (EIS), onboard Hinode, can gain access to open field-lines and be released into the solar wind (SW) via magnetic-interchange reconnection at magnetic null-points in pseudo-streamer configurations. When only one bipolar AR is present on the Sun and it is fully covered by the separatrix of a streamer, such as AR 10978 in December 2007, it seems unlikely that the upflowing AR plasma can find its way into the slow SW. However, signatures of plasma with AR composition have been found at 1 AU by Culhane et al. (2014) apparently originating from the West of AR 10978. We present a detailed topology analysis of AR 10978 and the surrounding large-scale corona based on a potential-field source-surface (PFSS) model. Our study shows that it is possible for the AR plasma to get around the streamer separatrix and be released into the SW via magnetic reconnection, occurring in at least two main steps. We analyse data from the Nançay Radioheliograph (NRH) searching for evidence of the chain of magnetic reconnections proposed. We find a noise storm above the AR and several varying sources at 150.9 MHz. Their locations suggest that they could be associated with particles accelerated during the first-step reconnection process and at a null point well outside of the AR. However, we find no evidence of the second-step reconnection in the radio data. Our results demonstrate that even when it appears highly improbable for the AR plasma to reach the SW, indirect channels involving a sequence of reconnections can make it possible.
△ Less
Submitted 25 September, 2014;
originally announced September 2014.
-
Annihilation of low energy antiprotons in silicon
Authors:
S. Aghion,
O. Ahlén,
A. S. Belov,
G. Bonomi,
P. Bräunig,
J. Bremer,
R. S. Brusa,
G. Burghart,
L. Cabaret,
M. Caccia,
C. Canali,
R. Caravita,
F. Castelli,
G. Cerchiari,
S. Cialdi,
D. Comparat,
G. Consolati,
J. H. Derking,
S. Di Domizio,
L. Di Noto,
M. Doser,
A. Dudarev,
R. Ferragut,
A. Fontana,
P. Genova
, et al. (34 additional authors not shown)
Abstract:
The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straig…
▽ More
The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straight path. The final position of the falling antihydrogen will be detected by a position sensitive detector. This detector will consist of an active silicon part, where the annihilations take place, followed by an emulsion part. Together, they allow to achieve 1$%$ precision on the measurement of $\bar{g}$ with about 600 reconstructed and time tagged annihilations.
We present here, to the best of our knowledge, the first direct measurement of antiproton annihilation in a segmented silicon sensor, the first step towards designing a position sensitive silicon detector for the AE$\mathrm{\bar{g}}$IS experiment. We also present a first comparison with Monte Carlo simulations (GEANT4) for antiproton energies below 5 MeV
△ Less
Submitted 11 March, 2014; v1 submitted 20 November, 2013;
originally announced November 2013.
-
Molecular hydrogen in the z = 2.66 damped Lyman-alpha absorber toward Q J0643-5041
Authors:
D. Albornoz Vásquez,
H. Rahmani,
P. Noterdaeme,
P. Petitjean,
R. Srianand,
C. Ledoux
Abstract:
We use high signal-to-noise ratio, high-resolution VLT-UVES data of Q J0643-5041 amounting to a total of more than 23 hours exposure time and fit the neutral hydrogen, metals and H2 absorption features with multiple-component Voigt profiles. We study the relative populations of H2 rotational levels and the fine-structure excitation of neutral carbon to determine the physical conditions in the H2-b…
▽ More
We use high signal-to-noise ratio, high-resolution VLT-UVES data of Q J0643-5041 amounting to a total of more than 23 hours exposure time and fit the neutral hydrogen, metals and H2 absorption features with multiple-component Voigt profiles. We study the relative populations of H2 rotational levels and the fine-structure excitation of neutral carbon to determine the physical conditions in the H2-bearing cloud. We find some evidence for part of the quasar broad line emission region not being fully covered by the H2-bearing cloud. We measure a total neutral hydrogen column density of log N(H) = 21.03 +/- 0.08. Molecular hydrogen is detected in several rotational levels, possibly up to J = 7, in a single component. The corresponding molecular fraction is log f = -2.19+0.07-0.08, where f = 2N(H2)/(2N(H2)+N(H)). The H2 Doppler parameter is of the order of 1.5 km/s for J = 0, 1 and 2 and larger for J>2. The molecular component has a kinetic temperature of T = 80 K, which yields a mean thermal velocity of about 1 km/s, consistent with the Doppler broadening of the lines. The UV ambient flux is of the order of the mean ISM Galactic flux. We discuss the possible detection of HD and derive an upper limit of log N(HD) < 13.65 +/- 0.07 leading to log HD/(2 H2) < -5.19 +/- 0.07 which is consistently lower than the primordial D/H ratio. Metals span about 210 km/s with [Zn/H] = -0.91 +/- 0.09 relative to solar, with iron depleted relative to zinc [Zn/Fe] = 0.45 +/- 0.06, and with the rare detection of copper. We follow the procedures used in our previous works to derive a constraint on the cosmological variation of the proton-to-electron mass ratio of (7.4 +/- 4.3 (stat) +/- 5.1 (syst)) ppm.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
-
Prospects for measuring the gravitational free-fall of antihydrogen with emulsion detectors
Authors:
AEgIS Collaboration,
S. Aghion,
O. Ahlén,
C. Amsler,
A. Ariga,
T. Ariga,
A. S. Belov,
G. Bonomi,
P. Bräunig,
J. Bremer,
R. S. Brusa,
L. Cabaret,
C. Canali,
R. Caravita,
F. Castelli,
G. Cerchiari,
S. Cialdi,
D. Comparat,
G. Consolati,
J. H. Derking,
S. Di Domizio,
L. Di Noto,
M. Doser,
A. Dudarev,
A. Ereditato
, et al. (46 additional authors not shown)
Abstract:
The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moiré deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the…
▽ More
The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moiré deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the time of flight. Nuclear emulsions can measure the annihilation vertex of antihydrogen atoms with a precision of about 1 - 2 microns r.m.s. We present here results for emulsion detectors operated in vacuum using low energy antiprotons from the CERN antiproton decelerator. We compare with Monte Carlo simulations, and discuss the impact on the AEgIS project.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Neutron injection during primordial nucleosynthesis alleviates the primordial 7Li problem
Authors:
Daniel Albornoz Vasquez,
Alexander Belikov,
Alain Coc,
Joseph Silk,
Elisabeth Vangioni
Abstract:
We present a parametrized study of the effects of free thermal neutron injection on primordial nucleosynthesis, where both the rate and the time scale of injection are varied. This generic approach is found to yield a successful solution for reducing the 7Li abundance without causing significant problems to other elemental abundances. Our analysis demonstrates that hadronic injection, possibly due…
▽ More
We present a parametrized study of the effects of free thermal neutron injection on primordial nucleosynthesis, where both the rate and the time scale of injection are varied. This generic approach is found to yield a successful solution for reducing the 7Li abundance without causing significant problems to other elemental abundances. Our analysis demonstrates that hadronic injection, possibly due to decays or annihilations of dark matter particles with a mass of about 1 to 30 GeV, provides a possible solution to an outstanding problem in the standard Big Bang model.
△ Less
Submitted 2 August, 2012;
originally announced August 2012.
-
Estructura, Biomasa aérea y carbono almacenado en los bosques del Sur y Noroccidente de córdoba
Authors:
Adela Vásquez,
Henry Arellano
Abstract:
We estimated the aerial biomass and stored carbon in twelve types of forests in the department of Córdoba with annual rain fall ranging from 3000 mm (super humid climates) to 1300 mm (semi-humid climate). Biomass was estimated based on structural aspects of the vegetation (diameter at breast height, total height, and wood specific weight). We tested nine allometric equations for tropical forests a…
▽ More
We estimated the aerial biomass and stored carbon in twelve types of forests in the department of Córdoba with annual rain fall ranging from 3000 mm (super humid climates) to 1300 mm (semi-humid climate). Biomass was estimated based on structural aspects of the vegetation (diameter at breast height, total height, and wood specific weight). We tested nine allometric equations for tropical forests available in the literature and selected those proposed by Chave et al (2005) that are specific for humid and dry forests. Carbon content in trees was measured in four tissues (stem, branch, bark, and leafs) through an automated dry combustion method, which estimates the percentage of carbon in a sample of known weight.
△ Less
Submitted 31 July, 2012;
originally announced August 2012.
-
Newly Discovered Global Temperature Structures in the Quiet Sun at Solar Minimum
Authors:
Zhenguang Huang,
Richard A. Frazin,
Enrico Landi,
Ward B. Manchester IV,
Alberto M. Vásquez,
Tamas I. Gombosi
Abstract:
Magnetic loops are building blocks of the closed-field corona. While active region loops are readily seen in images taken at EUV and X-ray wavelengths, quiet Sun loops are seldom identifiable and therefore difficult to study on an individual basis. The first analysis of solar minimum (Carrington Rotation 2077) quiet Sun (QS) coronal loops utilizing a novel technique called the Michigan Loop Diagno…
▽ More
Magnetic loops are building blocks of the closed-field corona. While active region loops are readily seen in images taken at EUV and X-ray wavelengths, quiet Sun loops are seldom identifiable and therefore difficult to study on an individual basis. The first analysis of solar minimum (Carrington Rotation 2077) quiet Sun (QS) coronal loops utilizing a novel technique called the Michigan Loop Diagnostic Technique (MLDT) is presented. This technique combines Differential Emission Measure Tomography (DEMT) and a potential field source surface (PFSS) model, and consists of tracing PFSS field lines through the tomographic grid on which the Local Differential Emission Measure (LDEM) is determined. As a result, the electron temperature Te and density Ne at each point along each individual field line can be obtained. Using data from STEREO/EUVI and SOHO/MDI, the MLDT identifies two types of QS loops in the corona: so-called "up" loops in which the temperature increases with height, and so-called "down" loops in which the temperature decreases with height. Up loops are expected, however, down loops are a surprise, and furthermore, they are ubiquitous in the low-latitude corona. Up loops dominate the QS at higher latitudes. The MLDT allows independent determination of the empirical pressure and density scale heights, and the differences between the two remain to be explained. The down loops appear to be a newly discovered property of the solar minimum corona that may shed light on the physics of coronal heating. The results are shown to be robust to the calibration uncertainties of the EUVI instrument.
△ Less
Submitted 27 July, 2012;
originally announced July 2012.
-
Constraining the variation of fundamental constants at z ~ 1.3 using 21-cm absorbers
Authors:
H. Rahmani,
R. Srianand,
N. Gupta,
P. Petitjean,
P. Noterdaeme,
D. Albornoz Vasquez
Abstract:
We present high resolution optical spectra obtained with the Ultraviolet and Visual Echelle Spectrograph (UVES) at the Very Large Telescope (VLT) and 21-cm absorption spectra obtained with the Giant Metrewave Radio Telescope (GMRT) and the Green Bank Telescope (GBT) of five quasars along the line of sight of which 21-cm absorption systems at 1.17 < z < 1.56 have been detected previously. We also p…
▽ More
We present high resolution optical spectra obtained with the Ultraviolet and Visual Echelle Spectrograph (UVES) at the Very Large Telescope (VLT) and 21-cm absorption spectra obtained with the Giant Metrewave Radio Telescope (GMRT) and the Green Bank Telescope (GBT) of five quasars along the line of sight of which 21-cm absorption systems at 1.17 < z < 1.56 have been detected previously. We also present milliarcsec scale radio images of these quasars obtained with the Very Large Baseline Array (VLBA). We use the data on four of these systems to constrain the time variation of x = g_p*alpha^2/mu where g_p is the proton gyromagnetic factor, alpha is the fine structure constant, and mu is the proton-to-electron mass ratio. We carefully evaluate the systematic uncertainties in redshift measurements using cross-correlation analysis and repeated Voigt profile fitting. In two cases we also confirm our results by analysing optical spectra obtained with the Keck telescope. We find the weighted and the simple means of Delta_x / x to be respectively -(0.1 +/- 1.3)x10^-6 and (0.0 +/- 1.5)x10^-6 at the mean redshift of <z> = 1.36 corresponding to a look back time of ~ 9 Gyr. This is the most stringent constraint ever obtained on Delta_x / x. If we only use the two systems towards quasars unresolved at milliarcsec scales, we get the simple mean of Delta_x / x = + (0.2 +/- 1.6)x10^-6. Assuming constancy of other constants we get Delta_alpha / alpha = (0.0 +/- 0.8)x10^-6 which is a factor of two better than the best constraints obtained so far using the Many Multiplet Method. On the other hand assuming alpha and g_p have not varied we derive Delta_mmu / mu = (0.0 +/- 1.5)x10^-6 which is again the best limit ever obtained on the variation of mu over this redshift range. [Abridged]
△ Less
Submitted 12 June, 2012;
originally announced June 2012.
-
Regenerating WIMPs in the light of direct and indirect detection
Authors:
Andrew J. Williams,
Celine Boehm,
Stephen M. West,
Daniel Albornoz Vasquez
Abstract:
There are several ways to explain the dark matter relic density other than by the ordinary freeze-out scenario. For example, the freeze-in mechanism may constitute an alternative for generating the correct relic density for dark matter candidates whose predicted freeze-out abundance is too low due to a large total annihilation cross section. Here we show that although such a mechanism could explai…
▽ More
There are several ways to explain the dark matter relic density other than by the ordinary freeze-out scenario. For example, the freeze-in mechanism may constitute an alternative for generating the correct relic density for dark matter candidates whose predicted freeze-out abundance is too low due to a large total annihilation cross section. Here we show that although such a mechanism could explain why a dark matter candidate has the correct relic density, some candidates may still be ruled out because they would lead to a large gamma ray flux in dwarf spheroidal galaxies or a large elastic scattering rate in direct detection experiments. To investigate this scenario we examine neutralino dark matter in the MSSM. However our conclusions can be generalised to other types of annihilating DM candidates with a low relic density in the freeze-out scenario but which have their relic densities generated by some other mechanism.
△ Less
Submitted 17 April, 2012;
originally announced April 2012.
-
Inclusive J/psi production in pp collisions at sqrt(s) = 2.76 TeV
Authors:
ALICE Collaboration,
B. Abelev,
J. Adam,
D. Adamova,
A. M. Adare,
M. M. Aggarwal,
G. Aglieri Rinella,
A. G. Agocs,
A. Agostinelli,
S. Aguilar Salazar,
Z. Ahammed,
A. Ahmad Masoodi,
N. Ahmad,
S. U. Ahn,
A. Akindinov,
D. Aleksandrov,
B. Alessandro,
R. Alfaro Molina,
A. Alici,
A. Alkin,
E. Almaraz Avina,
J. Alme,
T. Alt,
V. Altini,
S. Altinpinar
, et al. (948 additional authors not shown)
Abstract:
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=…
▽ More
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c. The results are compared with previously published results at sqrt(s)=7 TeV and with theoretical calculations.
△ Less
Submitted 6 November, 2012; v1 submitted 16 March, 2012;
originally announced March 2012.
-
The 125 GeV Higgs in the NMSSM in light of LHC results and astrophysics constraints
Authors:
Daniel Albornoz Vasquez,
Genevieve Belanger,
Celine Boehm,
Jonathan Da Silva,
Peter Richardson,
Chris Wymant
Abstract:
Recent LHC data suggest an excess in the Higgs decay channels into gamma gamma, W W and Z Z at roughly 125 GeV. The current excess in the diphoton channel is twice that expected from a Standard Model Higgs; whilst this may well change with more statistics, it is interesting to consider the implications should the result persist. Here, we assess whether the NMSSM with a neutralino dark matter candi…
▽ More
Recent LHC data suggest an excess in the Higgs decay channels into gamma gamma, W W and Z Z at roughly 125 GeV. The current excess in the diphoton channel is twice that expected from a Standard Model Higgs; whilst this may well change with more statistics, it is interesting to consider the implications should the result persist. Here, we assess whether the NMSSM with a neutralino dark matter candidate could explain this excess when astrophysical constraints (e.g. no overproduction of gamma rays and radio emission in the galaxy, no anomalous excess in the dark matter direct detection experiments and no dark matter overabundance) are imposed on the neutralino. This enables us to disregard unphysical regions of the parameter space even though the Higgs signal is compatible with the observed excess. The result of our analysis is that there are configurations of the parameter space which can explain the signal strength reported by the ATLAS and CMS collaborations for a Higgs mass within the required range. Should the observed signal strength finally be compatible with Standard Model expectations, it would be difficult to distinguish between the discovery of Standard Model Higgs and a SM-like Higgs from the NMSSM, unless one performs dedicated searches of very light Higgs bosons and possibly investigate peculiar signatures of supersymmetric particles. We also propose a new jets + missing E_T signal for the case where the LSP is a singlino-like neutralino.
△ Less
Submitted 1 August, 2012; v1 submitted 15 March, 2012;
originally announced March 2012.