Showing 1–4 of 4 results for author: Vasilev, A A

Tailoring wetting properties of organic hole-transport interlayers for slot-die coated perovskite solar modules

Authors: T. S. Le, I. A. Chuykoa, L. O. Luchnikova, K. A. Ilicheva, P. O. Sukhorukova, D. O. Balakirev, N. S. Saratovsky, A. O. Alekseev, S. S. Kozlov, D. S. Muratov, V. V. Voronov, P. A. Gostishchev, D. A. Kiselev, T. S. Ilina, A. A. Vasilev, A. Y. Polyakov, E. A. Svidchenko, O. A. Maloshitskaya, Yu. N. Luponosov, D. S. Saranin

Abstract: The use of self-assembled monolayers (SAMs) with anchoring groups was considered as an effective approach for interface engineering in perovskite solar cells with metal oxide charge transporting layers. However, the coating of SAM layers in PSMs by means of a slot-die is a challenging process due to the low viscosity of the solutions and the low wettability of the films. In this study, we integrat… ▽ More The use of self-assembled monolayers (SAMs) with anchoring groups was considered as an effective approach for interface engineering in perovskite solar cells with metal oxide charge transporting layers. However, the coating of SAM layers in PSMs by means of a slot-die is a challenging process due to the low viscosity of the solutions and the low wettability of the films. In this study, we integrate a triphenylamine-based polymer, pTPA-TDP, blended with SAM based on 5-[4-[4-(diphenylamino) phenyl] thiophene-2-carboxylic acid (TPATC), to address the challenges of uniform slot-die coating and interface passivation in large-area modules. We fabricated p-i-n oriented PSMs on 50x50 mm2 substrates (12-sub-cells) with NiO hole transport layer (HTL) and organic interlayers for surface modification. Wetting angle map** demonstrated that ununiform regions of the slot-die coated SAM have hydrophobicity with contact angle values up to 90°, causing fluctuations in absorber thickness and the presence of macro-defects at buried interfaces. The incorporation of the blended interlayer to NiO/perovskite junction homogenized the surface wettability (contact angle=40°) and mitigated lattice strain in the absorber. This enabled the effective use of SAM properties on a large-area surface, improving energy level alignment and enhancing the power conversion efficiency (PCE) of the modules from 13.98% to 15.83% and stability (ISOS-L-2, T80 period) from 500-1000 hours to 1630 hours. Investigation of PSMs upon cooling till -5 °C showed that the PCE increased by +0.19%/°C for samples with NiO HTL, while using SAM and blended interlayers raised the coefficient to ~0.40%/°C due to changes in activation energy and trap contributions to device performance across a wide temperature range. △ Less

Submitted 12 June, 2024; originally announced June 2024.

Micro pixelated halide perovskite photodiodes fabricated with ultraviolet laser scribing

Authors: A. P. Morozov, P. A. Gostishchev, A. Zharkova, A. A. Vasilev, A. E. Aleksandrov, A. R. Tameev, A. R. Ishteev, S. I. Didenko, D. S. Saranin

Abstract: In this study, we present a complex investigation for miniaturizing of perovskite photodiodes (PPDs) in various geometries with use of ultraviolet laser scribing (UV-LS). Employing a 355 nm (3.5 eV) pulsed laser at 30 kHz, we successfully manufactured PPDs with pixel configurations of 70x130 um2, 520x580 um2, and 2000x2000 um2. The utilization of UV-LS has a proven efficiency in achieving relevant… ▽ More In this study, we present a complex investigation for miniaturizing of perovskite photodiodes (PPDs) in various geometries with use of ultraviolet laser scribing (UV-LS). Employing a 355 nm (3.5 eV) pulsed laser at 30 kHz, we successfully manufactured PPDs with pixel configurations of 70x130 um2, 520x580 um2, and 2000x2000 um2. The utilization of UV-LS has a proven efficiency in achieving relevant diode characteristics, such as low dark currents and high shunt resistance, as well as ultrafast response. The multi-step scribing cycle provided precise patterning of perovskite photodiodes (PPDs) in a string design. The dark current densities demonstrated exceptional uniformity, ranging from 10-10 A/cm2 for 2000x2000 um2 pixelated PPDs to 10-9 A/cm2 for the 70x130 um2 configuration. The string PPDs, consisting of 10 pixels per string, displayed homogenous dark current values, ensuring effective isolation between devices. Under green light illumination (540 nm), all PPD types exhibited a broad Linear Dynamic Range (LDR). Specifically, LDR values reached 110 dB, 117 dB, and 136 dB for 70x130, 520x580, and 2000x2000 devices, respectively, spanning an illumination intensity range from 2*10-3 mW/cm2 to 2 mW/cm2. High responsivity values up to 0.38 A/W, depending on the PPDs geometry, highlight the potential of laser scribing devices for sensing in the visible range. The calculated specific detectivity performance (from 1011 to 1013 Jones) surpasses commercial analogs, while the sub-microsecond response of 70x130 um2 and 520x580 um2 miniaturized devices underscores their suitability for precise time resolution detection systems. △ Less

Submitted 9 December, 2023; originally announced December 2023.

Triphenylamine-based interlayer with carboxyl anchoring group for tuning of charge collection interface in stabilized p-i-n perovskite solar cells and modules

Authors: P. K. Sukhorukova, E. A. Ilicheva, P. A. Gostishchev, L. O. Luchnikov, M. M. Tepliakova, D. O. Balakirev, I. V. Dyadishchev, A. A. Vasilev, D. S. Muratov, Yu. N. Luponosov, A. Di Carlo, D. S. Saranin

Abstract: A novel triphenylamine-based hole transport material (HTM) with a carboxyl anchoring group (TPATC) was developed for tuning the interface between nanocrystalline NiO and double cation CsCH3(NH2)2PbI3-xClx absorber in p-i-n device architectures. We present a unique comprehensive confinement study of PSCs with TPATC as the self-assembled HTM, including analysis of numerical defect parameters, phase… ▽ More A novel triphenylamine-based hole transport material (HTM) with a carboxyl anchoring group (TPATC) was developed for tuning the interface between nanocrystalline NiO and double cation CsCH3(NH2)2PbI3-xClx absorber in p-i-n device architectures. We present a unique comprehensive confinement study of PSCs with TPATC as the self-assembled HTM, including analysis of numerical defect parameters, phase composition evolution, and up-scaling capabilities. Our investigation shows that the ultrathin TPATC interlayer effectively passivates traps, increases work-function of HTL by about ~0.2 eV, and enhances the charge carrier extraction efficiency. Advanced transient spectroscopy measurements revealed that modification of the NiO surface with TPATC in perovskite solar cells (PSCs) reduces the concentration of ionic defects by an order of magnitude. Interface engineering with TPATC allowed to reach power conversion efficiency of 20.58% for small area devices (0.15 cm2) under standard AM 1.5 G conditions. Using TPATC interlayer also provided stabilized performance of PSCs under operation conditions and improved sustainability of the perovskite absorber to decomposition. After continuous light-soaking (1000 h, ISOS-L-2 protocol), NiO/TPATC devices showed a slight decrease of 2% in maximum power. In contrast, NiO PSCs demonstrated decrease in power output (>20%) after 400 h. We explored the potential of TPATC to modify interfaces in large-area perovskite solar modules (PSM, active area-64.8 cm2, 12 sub-cells). By applying slot-die-coated TPATC, the PCE at AM 1.5 G conditions increased from 13.22% for NiO PSM to 15.64% for NiO/TPATC ones. This study provides new insights into the interface engineering for p-i-n perovskite solar cells, behavior of the ionic defects and their contribution to the long-term stability. △ Less

Submitted 22 November, 2023; originally announced November 2023.

Deep-level transient spectroscopy of the charged defects in p-i-n perovskite solar cells induced by light-soaking

Authors: A. A. Vasilev, D. S. Saranin, P. A. Gostishchev, M. P. Tuhova, S. I. Didenko, A. Y. Polyakov, A. Di Carlo

Abstract: The long-term stability of halide perovskite solar cells (PSCs) remains the critical problem of this photovoltaic technology. Different structural defects formed in the thin-film perovskite films were considered as a main trigger for the decomposition of the absorber and corrosion of the interfaces in the device structure. The changes in the stability performance of the PSCs require a detailed ana… ▽ More The long-term stability of halide perovskite solar cells (PSCs) remains the critical problem of this photovoltaic technology. Different structural defects formed in the thin-film perovskite films were considered as a main trigger for the decomposition of the absorber and corrosion of the interfaces in the device structure. The changes in the stability performance of the PSCs require a detailed analysis of the defects generated under external stress (light and heat). Using admittance, deep-level transient spectroscopy (DLTS) and reverse DLTS we determined the evolution of the defect energy levels in p-i-n PCS under continuous light soaking stress. We compared the impact of the charged defects on the performance and long-term stability of the CsFAPbI3 based devices with and without Cl-do**. Despite the gain in the output performance of the PCSs, the devices with CsFAPbI3-xClx showed improved light soaking stability. The T80 (time required to reduce initial efficiency by 20%) for Cl-doped PSCs was 1280h, while for pure CsFAPbI3 based devices only 650h. Three different defect energy levels were determined for different device configurations. We found that Cl-do** suppressed the formation of the antisite defects (IPb, IFA) and iodine interstitials (Ii). The changes in the defect's energy levels after continuous light soaking stress were analyzed and discussed. The present work provides new insights for the defect behavior of PSCs under continuous external stress, revealing the physical-chemical impact of the Cl-additive strategy. △ Less

Submitted 20 October, 2022; originally announced October 2022.