-
First high peak and average power single-pass THz FEL based on high brightness photoinjector
Authors:
M. Krasilnikov,
Z. Aboulbanine,
G. Adhikari,
N. Aftab,
A. Asoyan,
P. Boonpornprasert,
H. Davtyan,
G. Georgiev,
J. Good,
A. Grebinyk,
M. Gross,
A. Hoffmann,
E. Kongmon,
X. -K. Li,
A. Lueangaramwong,
D. Melkumyan,
S. Mohanty,
R. Niemczyk,
A. Oppelt,
H. Qian,
C. Richard,
F. Stephan,
G. Vashchenko,
T. Weilbach,
X. Zhang
, et al. (9 additional authors not shown)
Abstract:
Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central waveleng…
▽ More
Advanced experiments using THz pump and X-ray probe pulses at modern free-electron lasers (FELs) like the European X-ray FEL require a frequency-tunable, high-power, narrow-band THz source maintaining the repetition rate and pulse structure of the X-ray pulses. This paper reports the first results from a THz source, that is based on a single-pass high-gain THz FEL operating with a central wavelength of 100 micrometers. The THz FEL prototype is currently in operation at the Photo Injector Test facility at DESY in Zeuthen (PITZ) and uses the same type of electron source as the European XFEL photo injector. A self-amplified spontaneous emission (SASE) FEL was envisioned as the main mechanism for generating the THz pulses. Although the THz FEL at PITZ is supposed to use the same mechanism as at X-ray facilities, it cannot be considered as a simple scaling of the radiation wavelength because there is a large difference in the number of electrons per radiation wavelength, which is five orders of magnitude higher for the THz case. The bunching factor arising from the electron beam current profile contributes strongly to the initial spontaneous emission starting the FEL process. Proof-of-principle experiments were done at PITZ using an LCLS-I undulator to generate the first high-power, high-repetition-rate single-pass THz FEL radiation. Electron bunches with a beam energy of ~17 MeV and a bunch charge of up to several nC are used to generate THz pulses with a pulse energy of several tens of microjoules. For example, for an electron beam with a charge of ~2.4 nC, more than 100 microjoules were generated at a central wavelength of 100 micrometers. The narrowband spectrum was also demonstrated by spectral measurements. These proof-of-principle experiments pave the way for a tunable, high-repetition-rate THz source providing pulses with energies in the millijoule range.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Analysis of photoinjector transverse phase space in action and phase coordinates
Authors:
Houjun Qian,
Mikhail Krasilnikov,
Zakaria Aboulbanine,
Gowri Adhikari,
Namra Aftab,
Prach Boonpornpras,
Georgi Georgiev,
James Good,
Matthias Gross,
Christian Koschitzki,
Xiangkun Li,
Osip Lishilin,
Anusorn Lueangaramwong,
Raffael Niemczyk,
Anne Oppelt,
Guan Shu,
Frank Stephan,
Grygorii Vashchenko,
Tobias Weilbach
Abstract:
Photoinjectors are the main high brightness electron sources for X-ray free electron lasers (XFEL). Photoinjector emittance reduction is one of the key knobs for improving XFEL lasing, so precise emittance measurement is critical. It's well known that rms emittance is very sensitive to low intensity tails of particle distributions in the phase space, whose measurement depend on the signal to noise…
▽ More
Photoinjectors are the main high brightness electron sources for X-ray free electron lasers (XFEL). Photoinjector emittance reduction is one of the key knobs for improving XFEL lasing, so precise emittance measurement is critical. It's well known that rms emittance is very sensitive to low intensity tails of particle distributions in the phase space, whose measurement depend on the signal to noise ratio (SNR) and image processing procedures. Such sensitivities make the interpretations of beam transverse brightness challenging, leading to different emittance definitions to reduce the impact of tail particles. In this paper, transverse phase space is analyzed in action and phase coordinates for both analytical models and experiments, which give a more intuitive way to calculate the beam core brightness.
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
Slice energy spread measurement in the low energy photoinjector
Authors:
Houjun Qian,
Mikhail Krasilnikov,
Anusorn Lueangaramwong,
Xiangkun Li,
Osip Lishilin,
Zakaria Aboulbanine,
Gowri Adhikari,
Namra Aftab,
Prach Boonpornprasert,
Georgi Georgiev,
James Good,
Matthias Gross,
Christian Koschitzki,
Raffael Niemczyk,
Anne Oppelt,
Guan Shu,
Frank Stephan,
Grygorii Vashchenko,
Tobias Weilbach
Abstract:
Slice energy spread is one of the key parameters in free electron laser optimizations, but its accurate measurement is not straightforward. Two recent studies from high energy ($>$100 MeV) photoinjectors at SwissFEL and European XFEL have reported much higher slice energy spread than expected at their XFEL working points (200 - 250 pC). In this paper, a new method for measuring slice energy spread…
▽ More
Slice energy spread is one of the key parameters in free electron laser optimizations, but its accurate measurement is not straightforward. Two recent studies from high energy ($>$100 MeV) photoinjectors at SwissFEL and European XFEL have reported much higher slice energy spread than expected at their XFEL working points (200 - 250 pC). In this paper, a new method for measuring slice energy spread at a lower beam energy ($\sim$20 MeV) is proposed and demonstrated at the PhotoInjector Test facility at DESY Zeuthen (PITZ), and the results for 250 pC and 500 pC are much lower than those measured at high energy injectors.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
Single shot cathode transverse momentum imaging in high brightness photoinjectors
Authors:
Peng-Wei Huang,
Houjun Qian,
Ye Chen,
Daniele Filippetto,
Matthias Gross,
Igor Isaev,
Christian Koschitzki,
Mikhail Krasilnikov,
Shankar Lal,
Xiangkun Li,
Osip Lishilin,
David Melkumyan,
Raffael Niemczyk,
Anne Oppelt,
Fernando Sannibale,
Hamed Shaker,
Guan Shu,
Frank Stephan,
Chuanxiang Tang,
Grygorii Vashchenko,
Weishi Wan
Abstract:
In state of the art photoinjector electron sources, thermal emittance from photoemission dominates the final injector emittance. Therefore, low thermal emittance cathode developments and diagnostics are very important. Conventional thermal emittance measurements for the high gradient gun are time-consuming and thus thermal emittance is not measured as frequently as quantum efficiency during the li…
▽ More
In state of the art photoinjector electron sources, thermal emittance from photoemission dominates the final injector emittance. Therefore, low thermal emittance cathode developments and diagnostics are very important. Conventional thermal emittance measurements for the high gradient gun are time-consuming and thus thermal emittance is not measured as frequently as quantum efficiency during the lifetime of photocathodes, although both are important properties for the photoinjector optimizations. In this paper, a single shot measurement of photoemission transverse momentum, i.e., thermal emittance per rms laser spot size, is proposed for photocathode RF guns. By tuning the gun solenoid focusing, the electrons transverse momenta at the cathode are imaged to a downstream screen, which enables a single shot measurement of both the rms value and the detailed spectra of the photoelectrons transverse momenta. Both simulations and proof of principle experiments are reported.
△ Less
Submitted 17 February, 2020;
originally announced February 2020.
-
Performance analysis of the prototype THz-driven electron gun for the AXSIS project
Authors:
G. Vashchenko,
R. Assmann,
U. Dorda,
M. Fakhari,
A. Fallahi,
K. Galaydych,
F. Kaertner,
B. Marchetti,
N. Matlis,
T. Vinatier,
W. Qiao,
C. Zhou
Abstract:
The AXSIS project (Attosecond X-ray Science: Imaging and Spectroscopy) aims to develop a THz-driven compact X-ray source for applications e.g. in chemistry and biology by using ultrafast coherent diffraction imaging and spectroscopy. The key components of AXSIS are the THz-driven electron gun and THz-driven dielectric loaded linear accelerator as well as an inverse Compton scattering scheme for th…
▽ More
The AXSIS project (Attosecond X-ray Science: Imaging and Spectroscopy) aims to develop a THz-driven compact X-ray source for applications e.g. in chemistry and biology by using ultrafast coherent diffraction imaging and spectroscopy. The key components of AXSIS are the THz-driven electron gun and THz-driven dielectric loaded linear accelerator as well as an inverse Compton scattering scheme for the X-rays production. This paper is focused on the prototype of the THz-driven electron gun which is capable of accelerating electrons up to tens of keV. Such a gun was manufactured and tested at the test-stand at DESY. Due to variations in gun fabrication and generation of THz-fields the gun is not exactly operated at design parameters. Extended simulations have been performed to understand the experimentally observed performance of the gun. A detailed comparison between simulations and experimental measurements is presented in this paper.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
-
Beam Dynamics and Tolerance Studies of the THz-driven Electron Linac for the AXSIS Experiment
Authors:
K. Galaydych,
R. Assmann,
U. Dorda,
B. Marchetti,
G. Vashchenko,
I. Zagorodnov
Abstract:
A dielectric-loaded linac powered by THz-pulses is one of the key parts of the "Attosecond X-ray Science: Imaging and Spectroscopy" (AXSIS) project at DESY, Hamburg. As in conventional accelerators, the AXSIS linac is designed to have phase velocity equal to the speed of light which, in this case, is realized by tuning the thickness of the dielectric layer and the radius of the vacuum channel. The…
▽ More
A dielectric-loaded linac powered by THz-pulses is one of the key parts of the "Attosecond X-ray Science: Imaging and Spectroscopy" (AXSIS) project at DESY, Hamburg. As in conventional accelerators, the AXSIS linac is designed to have phase velocity equal to the speed of light which, in this case, is realized by tuning the thickness of the dielectric layer and the radius of the vacuum channel. Therefore, structure fabrication errors will lead to a change in the beam dynamics and beam quality. Additionally, errors in the bunch injection will also affect the acceleration process and can cause beam loss on the linac wall. This paper numerically investigates the process of electron beam acceleration in the AXSIS linac, taking into account the aforementioned errors. Particle tracking simulations were done using the code ECHO, which uses a low-dispersive algorithm for the field calculation and was specially adapted for the dielectric-loaded accelerating structures.
△ Less
Submitted 26 February, 2018;
originally announced February 2018.
-
Status and Objectives of the Dedicated Accelerator R&D Facility "SINBAD" at DESY
Authors:
U. Dorda,
B. Marchetti,
J. Zhu,
F. Mayet,
W. Kuropka,
T. Vinatier,
G. Vashchenko,
K. Galaydych,
P. A. Walker,
D. Marx,
R. Brinkmann,
R. Assmann,
N. H. Matlis,
A. Fallahi,
F. X. Kaertner
Abstract:
We present a status update on the dedicated R\&D facility SINBAD which is currently under construction at DESY. The facility will host multiple independent experiments on the acceleration of ultra-short electron bunches and novel, high gradient acceleration methods. The first experiment is the ARES-experiment with a normal conducting 100\,MeV S-band linac at its core. We present the objectives of…
▽ More
We present a status update on the dedicated R\&D facility SINBAD which is currently under construction at DESY. The facility will host multiple independent experiments on the acceleration of ultra-short electron bunches and novel, high gradient acceleration methods. The first experiment is the ARES-experiment with a normal conducting 100\,MeV S-band linac at its core. We present the objectives of this experiment ranging from the study of compression techniques to sub-fs level to its application as injector for various advanced acceleration schemes e.g. the plans to use ARES as a test-site for DLA experiments in the context of the ACHIP collaboration. The time-line including the planned extension with laser driven plasma-wakefield acceleration is presented. The second initial experiment is AXSIS which aims to accelerate fs-electron bunches to 15\,MeV in a THz driven dielectric structure and subsequently create X-rays by inverse Compton scattering.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Studies on charge production from Cs2Te photocathodes in the PITZ L-band normal conducting radio frequency photo injector
Authors:
C. Hernandez-Garcia,
M. Kraslinikov,
G. Asova,
M. Bakr,
P. Boonpornprasert,
J. Good,
M. Gross,
H. Huck,
I. Isaev,
D. Kalantaryan,
M. Khojoyan,
G. Kourkafas,
O. Lishilin,
D. Malyutin,
D. Melkumyan,
A. Oppelt,
M. Otevrel,
G. Pathak,
Y. Renier,
T. Rublack,
F. Stephan,
G. Vashchenko,
Q. Zhao
Abstract:
This paper discusses the behavior of electron bunch charge produced in an L-band normal conducting radio frequency cavity (RF gun) from Cs2Te photocathodes illuminated with ps-long UV laser pulses when the laser transverse distribution consists of a flat-top core with Gaussian-like decaying halo. The produced charge shows a linear dependence at low laser pulse energies as expected in the quantum e…
▽ More
This paper discusses the behavior of electron bunch charge produced in an L-band normal conducting radio frequency cavity (RF gun) from Cs2Te photocathodes illuminated with ps-long UV laser pulses when the laser transverse distribution consists of a flat-top core with Gaussian-like decaying halo. The produced charge shows a linear dependence at low laser pulse energies as expected in the quantum efficiency limited emission regime, while its dependence on laser pulse energy is observed to be much weaker for higher values, due to space charge limited emission. However, direct plug-in of experimental parameters into the space charge tracking code ASTRA yields lower output charge in the space charge limited regime compared to measured values. The rate of increase of the produced charge at high laser pulse energies close to the space charge limited emission regime seems to be proportional to the amount of halo present in the radial laser profile since the charge from the core has saturated already. By utilizing core + halo particle distributions based on measured radial laser profiles, ASTRA simulations and semi-analytical emission models reproduce the behavior of the measured charge for a wide range of RF gun and laser operational parameters within the measurement uncertainties.
△ Less
Submitted 1 July, 2016;
originally announced July 2016.
-
New class of compounds - variators - are reprogramming substrate specificity of H4K12Ac, H4K16Ac and H4K20Ac epigenetic marks reading bromodomain of BPTF protein
Authors:
Oleksandr Ya Yakovenko,
Sreeja Leelakumari,
Ganna Vashchenko,
Albert Badiong,
Steven J. M. Jones
Abstract:
Previously reported [http://arxiv.longhoe.net/abs/1506.06433] reprogramming of substrate specificity of H3K4Me3 epigenetic marks reading PHD domain of BPTF protein illustrates therapeutic potential of a new class of non-inhibitor small organic compounds - variators. Here we address the question about reproducibility of rational design of variators by reprogramming of the second epigenetic marks reading do…
▽ More
Previously reported [http://arxiv.longhoe.net/abs/1506.06433] reprogramming of substrate specificity of H3K4Me3 epigenetic marks reading PHD domain of BPTF protein illustrates therapeutic potential of a new class of non-inhibitor small organic compounds - variators. Here we address the question about reproducibility of rational design of variators by reprogramming of the second epigenetic marks reading domain of BPTF protein - bromodomain. Bromodomain of BPTF binds to epigenetic marks in form of acetylated lysine of histone H4 (H4K12Ac, H4K16Ac and H4K20Ac), which physicochemical properties and binding mode differs considerably from those of methylated H3K4 marks. Thus, detailed description of computational approach for reprogramming of bromodomain substrate specificity illustrates both general and target specific attributes of computer aided variators design.
△ Less
Submitted 22 June, 2015;
originally announced June 2015.
-
New class of compounds - variators - are reprogramming substrate specificity of H3K4me3 epigenetic marks reading PHD domain of BPTF protein
Authors:
Oleksandr Ya Yakovenko,
Sreeja Leelakumari,
Ganna Vashchenko,
Pierre Cheung,
Albert Badiong,
Steven J. M. Jones
Abstract:
In lymphoma, mutations in genes of histone modifying proteins are frequently observed. Notably, somatic mutations in the activatory histone modification writing protein MLL2 and the repressive modification writer EZH2 are the most frequent. Gain of function mutations are typically detected in EZH2 whilst MLL2 mutations are usually observed as conferring a homozygous loss of function. The gain-of-f…
▽ More
In lymphoma, mutations in genes of histone modifying proteins are frequently observed. Notably, somatic mutations in the activatory histone modification writing protein MLL2 and the repressive modification writer EZH2 are the most frequent. Gain of function mutations are typically detected in EZH2 whilst MLL2 mutations are usually observed as conferring a homozygous loss of function. The gain-of-function mutations in EZH2 provide an obvious target for the development of inhibitors with therapeutic potential. To counter the loss of functional MLL2 protein, we computationally predicted compounds that are able to modulate the reader of the corresponding modifications, BPTF, to recognize other forms of the histone H3 lysine 4, instead of the tri-methylated form normally produced by MLL2. By forming a synthetic triple-complex of a compound, the histone H3 tail and BPTF we potentially circumvent the requirement for functional MLL2 methyl-transferase through the modulation of BPTF activity. Here we show a proof-of-principle that special compounds, named variators, can reprogram selectivity of protein binding and thus create artificial regulatory pathways which can have a potential therapeutic role. A therapeutic role of BPTF variators may extend to other diseases that involve loss of MLL2 function, such as Kabuki syndrome or the aberrant functioning of H3K4 modification as observed in Huntington disease and in memory formation.
△ Less
Submitted 21 June, 2015;
originally announced June 2015.