-
Role of the constriction angle on the clogging by bridging of suspensions of particles
Authors:
Nathan Vani,
Sacha Escudier,
Deok-Hoon Jeong,
Alban Sauret
Abstract:
Confined flows of particles can lead to clogging, and therefore failure, of various fluidic systems across many applications. As a result, design guidelines need to be developed to ensure that clogging is prevented or at least delayed. In this Letter, we investigate the influence of the angle of reduction in the cross-section of the channel on the bridging of semi-dilute and dense non-Brownian sus…
▽ More
Confined flows of particles can lead to clogging, and therefore failure, of various fluidic systems across many applications. As a result, design guidelines need to be developed to ensure that clogging is prevented or at least delayed. In this Letter, we investigate the influence of the angle of reduction in the cross-section of the channel on the bridging of semi-dilute and dense non-Brownian suspensions of spherical particles. We observe a decrease of the clogging probability with the reduction of the constriction angle. This effect is more pronounced for dense suspensions close to the maximum packing fraction where particles are in contact in contrast to semi-dilute suspensions. We rationalize this difference in terms of arch selection. We describe the role of the constriction angle and the flow profile, providing insights into the distinct behavior of semi-dilute and dense suspensions.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Caging and fluid deformations in dense bidisperse suspensions
Authors:
Virgile Thiévenaz,
Nathan Vani,
Alban Sauret
Abstract:
We investigate the link between the geometric environment of particles, the local deformations of the solvent, and the bulk effective viscosity in non-Brownian suspensions. First, we discuss the caging of particles by their neighbors,and especially the caging of small particles by large ones in bidisperse suspensions.We develop a model that attributes an effective volume to particles depending on…
▽ More
We investigate the link between the geometric environment of particles, the local deformations of the solvent, and the bulk effective viscosity in non-Brownian suspensions. First, we discuss the caging of particles by their neighbors,and especially the caging of small particles by large ones in bidisperse suspensions.We develop a model that attributes an effective volume to particles depending on their environment, and yields the local deformations and effective viscosity. We compare this model to data from the literature, as well as to our own experiments with suspensions of non-Brownian polystyrene beads. Using dissolved polymers and their coil-stretch transition as strain probes, we measure the local deformation of the liquid and the effect of caging thereon. We obtain a linear relationship between the amplified local strain rate and the particle volume fraction, in which the critical volume fraction $φ_\mathrm{c}$ appears as an effective volume of the particles; this relationship is found valid up into the dense regime.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
Deposition and alignment of fiber suspensions by dip coating
Authors:
Deok-Hoon Jeong,
Langqi Xing,
Michael Ka Ho Lee,
Nathan Vani,
Alban Sauret
Abstract:
The dip coating of suspensions made of monodisperse non-Brownian spherical particles dispersed in a Newtonian fluid leads to different coating regimes depending on the ratio of the particle diameter to the thickness of the film entrained on the substrate. In particular, dilute particles dispersed in the liquid are entrained only above a threshold value of film thickness. In the case of anisotropic…
▽ More
The dip coating of suspensions made of monodisperse non-Brownian spherical particles dispersed in a Newtonian fluid leads to different coating regimes depending on the ratio of the particle diameter to the thickness of the film entrained on the substrate. In particular, dilute particles dispersed in the liquid are entrained only above a threshold value of film thickness. In the case of anisotropic particles, in particular fibers, the smallest characteristic dimension will control the entrainment of the particle. Furthermore, it is possible to control the orientation of the anisotropic particles depending on the substrate geometry. To test the hypotheses, we performed dip-coating experiments with dilute suspensions of non-Brownian fibers with different length-to-diameter aspect ratios. We characterize the number of fibers entrained on the surface of the substrate as a function of the withdrawal velocity, allowing us to estimate a threshold capillary number below which all the particles remain in the liquid bath. Besides, we measure the angular distribution of the entrained fibers for two different substrate geometries: flat plates and cylindrical rods. We then measure the film thickness for more concentrated fiber suspensions. The entrainment of the fibers on a flat plate and a cylindrical rod is primarily controlled by the smaller characteristic length of the fibers: their diameter. At first order, the entrainment threshold scales similarly to that of spherical particles. The length of the fibers only appears to have a minor influence on the entrainment threshold. No preferential alignment is observed for non-Brownian fibers on a flat plate, except for very thin films, whereas the fibers tend to align themselves along the axis of a cylindrical rod for a large enough ratio of the fiber length to the radius of the cylindrical rod.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Influence of the solid fraction on the clogging by bridging of suspensions in constricted channels
Authors:
Nathan Vani,
Sacha Escudier,
Alban Sauret
Abstract:
Clogging can occur whenever a suspension of particles flows through a confined system. The formation of clogs is often correlated to a reduction in the cross-section of the channel. In this study, we consider the clogging by bridging, i.e., through the formation of a stable arch of particles at a constriction that hinders the transport of particles downstream of the clog. To characterize the role…
▽ More
Clogging can occur whenever a suspension of particles flows through a confined system. The formation of clogs is often correlated to a reduction in the cross-section of the channel. In this study, we consider the clogging by bridging, i.e., through the formation of a stable arch of particles at a constriction that hinders the transport of particles downstream of the clog. To characterize the role of the volume fraction of the suspension on the clogging dynamics, we study the flow of particulate suspensions through 3D-printed millifluidic devices. We systematically characterize the bridging of non-Brownian particles in a quasi-bidimensional system in which we directly visualize and track the particles as they flow and form arches at a constriction. We report the conditions for clogging by bridging when varying the constriction width to particle diameter ratio for different concentrations of the particles in suspension. We then discuss our results using a stochastic model to rationalize the influence of solid fraction on the probability of clogging. Understanding the mechanisms and conditions of clog formation is an important step for optimizing engineering design and develo** more reliable dispensing systems.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
