-
Effect of the neutral beam injector operational regime on the Alfven eigenmode saturation phase in DIII-D plasma
Authors:
J Varela,
D A Spong,
L Garcia,
Y Ghai,
D Zarzoso,
D del-Castillo-Negrete,
H Betar,
J Ortiz,
D C Pace,
M A Van Zeeland,
X Du,
R Sanchez,
V Tribaldos,
J M Reynolds-Barredo
Abstract:
The aim of this study is to analyze the effect of the neutral beam injector (NBI) operation regime on the saturation phase of the Alfven Eigenmodes (AEs) in DIII-D plasma. The analysis is done using the linear and nonlinear versions of the gyro-fluid code FAR3d. A set of parametric analyses are performed modifying the nonlinear simulation EP \b{eta} (NBI injection power), EP energy (NBI voltage) a…
▽ More
The aim of this study is to analyze the effect of the neutral beam injector (NBI) operation regime on the saturation phase of the Alfven Eigenmodes (AEs) in DIII-D plasma. The analysis is done using the linear and nonlinear versions of the gyro-fluid code FAR3d. A set of parametric analyses are performed modifying the nonlinear simulation EP \b{eta} (NBI injection power), EP energy (NBI voltage) and the radial location of the EP density profile gradient (NBI radial deposition). The analysis indicates a transition from the soft (local plasma relaxation) to the hard MHD (global plasma relaxation) limit if the simulation EP \b{eta} >= 0.02, leading to bursting MHD activity caused by radial AEs overlap**. MHD bursts cause an enhancement of the EP transport showing ballistic-like features as avalanche-like events. Simulations in the soft MHD limit show an increment of the EP density gradient as the EP \b{eta} increases. On the other hand, there is a gradient upper limit in the hard MHD limit, consistent with the critical-gradient behavior. AEs induce shear flows and zonal current leading to the deformation of the flux surfaces and the safety factor profile, respectively, particularly strong for the simulation in the hard MHD limit. Simulations in the hard MHD regime show a decrease of the AE frequency in the saturation phase; this is caused by the destabilization of a transitional mode between a 9/3-10/3 TAE and a 9/3 RSAE that may explain the AE frequency down-swee** observed in some DIII-D discharges. Reducing the EP energy in the nonlinear simulations leads to a weakening of the plasma perturbation. On the other hand, increasing the EP energy causes the opposite effect. Nonlinear simulations of off-axis NBI profiles indicate a lower plasma perturbation as the EP density gradient is located further away from the magnetic axis.
△ Less
Submitted 7 November, 2023;
originally announced November 2023.
-
Design and simulation of an Imaging Neutral Particle Analyzer for the ASDEX Upgrade tokamak
Authors:
J. Rueda-Rueda,
M. Garcia-Munoz,
E. Viezzer,
P. A. Schneider,
J. Garcia-Dominguez,
J. Ayllon-Guerola,
J. Galdon-Quiroga,
A. Herrmann,
X. Du,
M. A. Van Zeeland,
P. Oyola,
M. Rodriguez-Ramos,
the ASDEX-Upgrade team
Abstract:
An Imaging Neutral Particle Analyser (INPA) diagnostic has been designed for the ASDEX Upgrade (AUG) tokamak. The AUG INPA diagnostic will measure fast neutrals esca** the plasma after CX reactions. The neutrals will be ionised by a 20 nm carbon foil and deflected towards a scintillator by the local magnetic field. The use of a neutral beam injector (NBI) as active source of neutrals will provid…
▽ More
An Imaging Neutral Particle Analyser (INPA) diagnostic has been designed for the ASDEX Upgrade (AUG) tokamak. The AUG INPA diagnostic will measure fast neutrals esca** the plasma after CX reactions. The neutrals will be ionised by a 20 nm carbon foil and deflected towards a scintillator by the local magnetic field. The use of a neutral beam injector (NBI) as active source of neutrals will provide radially resolved measurements while the use of a scintillator as active component will allow us to cover the whole plasma along the NBI line with unprecedented phase-space resolution ($ < $ 12 keV and 8 cm) and fast temporal response (up to 1 kHz with the high resolution acquisition system and above 100 kHz with the low resolution one); making it suitable to study localised fast-ions redistributions in phase-space.
△ Less
Submitted 24 March, 2022;
originally announced March 2022.
-
Subdominant modes and optimization trends of DIII-D reverse magnetic shear configurations
Authors:
J. Varela,
D. A. Spong,
M. Murakami,
L. Garcia,
E. D'Azevedo,
M. A. Van Zeeland,
S. Munaretto
Abstract:
Alfven Eigenmodes and magneto-hydrodynamic modes are destabilized in DIII-D reverse magnetic shear configurations and may limit the performance of the device. We use the reduced MHD equations in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particles (with gyro-fluid closures) as well as the geodesic acoustic wave dynamics. The aim of the study…
▽ More
Alfven Eigenmodes and magneto-hydrodynamic modes are destabilized in DIII-D reverse magnetic shear configurations and may limit the performance of the device. We use the reduced MHD equations in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particles (with gyro-fluid closures) as well as the geodesic acoustic wave dynamics. The aim of the study consists in finding ways to avoid or minimize MHD and AE activity for different magnetic field configurations and neutral beam injection operational regimes. The simulations show at the beginning of the discharge, before the reverse shear region is formed, a plasma that is AE unstable and marginally MHD stable. As soon as the reverse shear region appears, ideal MHD modes are destabilized with a larger growth rate than the AEs. Both MHD modes and AEs coexist during the discharge, although the MHD modes are more unstable as the reverse shear region deepens. The simulations indicate the destabilization of Beta induced AE, Toroidal AE, Elliptical AE and Reverse Shear AE at different phases of the discharges. A further analysis of the NBI operational regime indicates that the AE stability can be improved if the NBI injection is off axis, because on-axis injection leads to AEs with larger growth rate and frequency. In addition, decreasing the beam energy or increasing the NBI relative density leads to AEs with larger growth rate and frequency, so an NBI operation in the weakly resonant regime requires higher beam energies than in the experiment. The MHD linear stability can be also improved if the reverse shear region and the q profile near the magnetic axis are in between the rational surfaces q=2 and q=1, particularly if there is a region in the core with negative shear, avoiding a flat q profile near the magnetic axis.
△ Less
Submitted 1 April, 2019;
originally announced April 2019.
-
Energetic particle instabilities in fusion plasmas
Authors:
S E Sharapov,
B Alper,
H L Berk,
D N Borba,
B N Breizman,
C D Challis,
I G J Classen,
E M Edlund,
J Eriksson,
A Fasoli,
E D Fredrickson,
G Y Fu,
M Garcia-Munoz,
T Gassner,
K Ghantous,
V Goloborodko,
N N Gorelenkov,
M P Gryaznevich,
S Hacquin,
W W Heidbrink,
C Hellesen,
V G Kiptily,
G J Kramer,
P Lauber,
M K Lilley
, et al. (19 additional authors not shown)
Abstract:
Remarkable progress has been made in diagnosing energetic particle instabilities on present-day machines and in establishing a theoretical framework for describing them. This overview describes the much improved diagnostics of Alfven instabilities and modelling tools developed world-wide, and discusses progress in interpreting the observed phenomena. A multi-machine comparison is presented giving…
▽ More
Remarkable progress has been made in diagnosing energetic particle instabilities on present-day machines and in establishing a theoretical framework for describing them. This overview describes the much improved diagnostics of Alfven instabilities and modelling tools developed world-wide, and discusses progress in interpreting the observed phenomena. A multi-machine comparison is presented giving information on the performance of both diagnostics and modelling tools for different plasma conditions outlining expectations for ITER based on our present knowledge.
△ Less
Submitted 31 October, 2013;
originally announced October 2013.
