-
Effect of Oxygen Defects Blocking Barriers on Gadolinium Doped Ceria (GDC) Electro-Chemo-Mechanical Properties
Authors:
Ahsanul Kabir,
Simone Santucci,
Ngo Van Nong,
Maxim Varenik,
Igor Lubomirsky,
Robin Nigon,
Paul Muralt,
Vincenzo Esposito
Abstract:
Some oxygen defective metal oxides, such as cerium and bismuth oxides, have recently shown exceptional electrostrictive properties that are even superior to the best performing lead-based electrostrictors, e.g. lead-magnesium-niobates (PMN). Compared to piezoelectric ceramics, electromechanical mechanisms of such materials do not depend on crystalline symmetry, but on the concentration of oxygen v…
▽ More
Some oxygen defective metal oxides, such as cerium and bismuth oxides, have recently shown exceptional electrostrictive properties that are even superior to the best performing lead-based electrostrictors, e.g. lead-magnesium-niobates (PMN). Compared to piezoelectric ceramics, electromechanical mechanisms of such materials do not depend on crystalline symmetry, but on the concentration of oxygen vacancy in the lattice. In this work, we investigate for the first time the role of oxygen defect configuration on the electro-chemo-mechanical properties. This is achieved by tuning the oxygen defects blocking barrier density in polycrystalline gadolinium doped ceria with known oxygen vacancy concentration, Ce0.9Gd0.1O2-x,x= 0.05. Nanometric starting powders of ca. 12 nm are sintered in different conditions, including field assisted spark plasma sintering (SPS), fast firing and conventional method at high temperatures. These approaches allow controlling grain size and Gd-dopant diffusion, i.e. via thermally driven solute drag mechanism. By correlating the electro-chemo-mechanical properties, we show that oxygen vacancy distribution in the materials play a key role in ceria electrostriction, overcoming the expected contributions from grain size and dopant concentration.
△ Less
Submitted 3 July, 2019;
originally announced July 2019.
-
Effect of ion-implantation-induced defects and Mg dopants on thermoelectric properties of ScN
Authors:
Nina Tureson,
Marc Marteau,
Thierry Cabioch,
Ngo Van Nong,
Jens Jensen,
Jun Lu,
Grzegorz Greczynski,
Daniele Fournier,
Niraj Singh,
Ajay Soni,
Laurent Belliard,
Per Eklund,
Arnaud le Febvrier
Abstract:
For applications in energy harvesting, environmentally friendly cooling, and as power sources in remote or portable applications, it is desired to enhance the efficiency of thermoelectric materials. One strategy consists of reducing the thermal conductivity while increasing or retaining the thermoelectric power factor. An approach to achieve this is do** to enhance the Seebeck coefficient and el…
▽ More
For applications in energy harvesting, environmentally friendly cooling, and as power sources in remote or portable applications, it is desired to enhance the efficiency of thermoelectric materials. One strategy consists of reducing the thermal conductivity while increasing or retaining the thermoelectric power factor. An approach to achieve this is do** to enhance the Seebeck coefficient and electrical conductivity, while simultaneously introducing defects in the materials to increase phonon scattering. Here, we use Mg ion implantation to induce defects in epitaxial ScN (111) films. The films were implanted with Mg+ ions with different concentration profiles along the thickness of the film, incorporating 0.35 to 2.2 at.% of Mg in ScN. Implantation at high temperature (600 C), with few defects due to the temperature, does not substantially affect the thermal conductivity compared to a reference ScN. Samples implanted at room temperature, in contrast, exhibited a reduction of the thermal conductivity by a factor of three. The sample doped with 2.2 at.% Mg also showed an increased power factor after implantation. This study thus shows the effect of ion-induced defects on thermal conductivity of ScN films. High-temperature implantation allows the defects to be annealed out during implantation, while the defects are retained for room-temperature implanted samples, allowing for a drastic reduction in thermal conductivity.
△ Less
Submitted 24 September, 2018;
originally announced September 2018.
-
The electronic-structure origin of the anisotropic thermopower of nanolaminated Ti3SiC2 determined by polarized x-ray spectroscopy and Seebeck measurements
Authors:
Martin Magnuson,
Maurizio Mattesini,
Ngo Van Nong,
Per Eklund,
Lars Hultman
Abstract:
Nanolaminated materials exhibit characteristic magnetic, mechanical, and thermoelectric properties, with large contemporary scientific and technological interest. Here, we report on the anisotropic Seebeck coefficient in nanolaminated Ti3SiC2 single-crystal thin films and trace the origin to anisotropies in element-specific electronic states. In bulk polycrystalline form, Ti3SiC2 has a virtually z…
▽ More
Nanolaminated materials exhibit characteristic magnetic, mechanical, and thermoelectric properties, with large contemporary scientific and technological interest. Here, we report on the anisotropic Seebeck coefficient in nanolaminated Ti3SiC2 single-crystal thin films and trace the origin to anisotropies in element-specific electronic states. In bulk polycrystalline form, Ti3SiC2 has a virtually zero Seebeck coefficient over a wide temperature range. In contrast, we find that the in-plane (basal ab) Seebeck coefficient of Ti3SiC2, measured on single-crystal films has a substantial and positive value of 4-6 muV/K. Employing a combination of polarized angle-dependent x-ray spectroscopy and density functional theory we directly show electronic structure anisotropy in inherently nanolaminated Ti3SiC2 single-crystal thin films as a model system. The density of Ti 3d and C 2p states at the Fermi level in the basal ab-plane is about 40 % higher than along the c-axis. The Seebeck coefficient is related to electron and hole-like bands close to the Fermi level but in contrast to ground state density functional theory modeling, the electronic structure is also influenced by phonons that need to be taken into account. Positive contribution to the Seebeck coefficient of the element-specific electronic occupations in the basal plane is compensated by 73 % enhanced Si 3d electronic states across the laminate plane that give rise to a negative Seebeck coefficient in that direction. Strong phonon vibration modes with three to four times higher frequency along the c-axis than along the basal ab-plane also influence the electronic population and the measured spectra by the asymmetric average displacements of the Si atoms. These results constitute experimental evidence explaining why the average Seebeck coefficient of Ti3SiC2 in polycrystals is negligible over a wide temperature range.
△ Less
Submitted 22 May, 2012;
originally announced May 2012.
