-
The mechanics of solid-state nanofoaming
Authors:
Frederik Van Loock,
Victoria Bernardo,
Miguel Angel Rodríguez Pérez,
Norman A. Fleck
Abstract:
Solid-state nanofoaming experiments are conducted on two PMMA grades of markedly different molecular weight using CO$_2$ as the blowing agent. The sensitivity of porosity to foaming time and foaming temperature is measured. Also, the microstructure of the PMMA nanofoams is characterised in terms of cell size and cell nucleation density. A one dimensional numerical model is developed to predict the…
▽ More
Solid-state nanofoaming experiments are conducted on two PMMA grades of markedly different molecular weight using CO$_2$ as the blowing agent. The sensitivity of porosity to foaming time and foaming temperature is measured. Also, the microstructure of the PMMA nanofoams is characterised in terms of cell size and cell nucleation density. A one dimensional numerical model is developed to predict the growth of spherical, gas-filled voids during the solid-state foaming process. Diffusion of CO$_2$ within the PMMA matrix is sufficiently rapid for the concentration of CO$_2$ to remain almost uniform spatially. The foaming model makes use of experimentally calibrated constitutive laws for the uniaxial stress versus strain response of the PMMA grades as a function of strain rate and temperature, and the effect of dissolved CO$_2$ is accounted for by a shift in the glass transition temperature of the PMMA. The maximum achievable porosity is interpreted in terms of cell wall tearing and comparisons are made between the predictions of the model and nanofoaming measurements; it is deduced that the failure strain of the cell walls is sensitive to cell wall thickness.
△ Less
Submitted 17 September, 2019;
originally announced October 2019.
-
Mechanical properties of PMMA sepiolite nanocellular materials with a bimodal cellular structure
Authors:
Victoria Bernardo,
Frederik Van Loock,
Judith Martin de Leon,
Norman A. Fleck,
Miguel Angel Rodriguez Perez
Abstract:
Bimodal cellular poly(methyl methacrylate) with micron and nano sized (300 to 500 nm) cells with up to 5 weight percent of sepiolite nanoparticles and porosity from 50 weight percent to 75 weight percent are produced by solid state foaming. Uniaxial compression tests are performed to measure the effect of sepiolite concentration on the elastic modulus and the yield strength of the solid and cellul…
▽ More
Bimodal cellular poly(methyl methacrylate) with micron and nano sized (300 to 500 nm) cells with up to 5 weight percent of sepiolite nanoparticles and porosity from 50 weight percent to 75 weight percent are produced by solid state foaming. Uniaxial compression tests are performed to measure the effect of sepiolite concentration on the elastic modulus and the yield strength of the solid and cellular nanocomposites. Single edge notch bend tests are conducted to relate the fracture toughness of the solid and cellular nanocomposites to sepiolite concentration. The relative modulus is independent of sepiolite content to within material scatter when considering the complete porosity range. In contrast, a mild enhancement of the relative modulus is observed by the addition of sepiolite particles for the foamed nanocomposites with a porosity close to 50 percent. The relative compressive strength of the cellular nanocomposites mildly decreases as a function of sepiolite concentration. A strong enhancement of the relative fracture toughness by the addition of sepiolites is observed. The enhancement of the relative fracture toughness and the relative modulus (at 50 percent porosity) can be attributed to an improved dispersion of the particles due to foaming and the migration of micron sized aggregates from the solid phase to the microcellular pores during foaming.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Deformation and failure maps for PMMA in uniaxial tension
Authors:
Frederik Van Loock,
Norman A. Fleck
Abstract:
Uniaxial tensile tests are performed on a polymethyl methacrylate (PMMA) grade over a range of temperatures near the glass transition and over two decades of strain rate. Deformation maps are constructed for Young's modulus, flow strength, and failure strain as a function of temperature for selected strain rates. The glassy, glass transition and rubbery regimes are identified, and constitutive rel…
▽ More
Uniaxial tensile tests are performed on a polymethyl methacrylate (PMMA) grade over a range of temperatures near the glass transition and over two decades of strain rate. Deformation maps are constructed for Young's modulus, flow strength, and failure strain as a function of temperature for selected strain rates. The glassy, glass transition and rubbery regimes are identified, and constitutive relations are calibrated for the modulus and flow strength within each regime.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
