-
Selective copper recovery from ammoniacal waste streams using a systematic biosorption process
Authors:
Nina Ricci Nicomel,
Lila Otero-Gonzalez,
Adam Williamson,
Yong Sik Ok,
Pascal Van Der Voort,
Tom Hennebel,
Gijs Du Laing
Abstract:
Cu-NH3 bearing effluents arise from electroplating and metal extraction industries, requiring innovative and sustainable Cu recovery technologies to reduce their adverse environmental impact. CO32- and Zn are often co-occurring, and thus, selective Cu recovery from these complex liquid streams is required for economic viability. This study assessed 23 sustainable biosorbents classified as tannin-r…
▽ More
Cu-NH3 bearing effluents arise from electroplating and metal extraction industries, requiring innovative and sustainable Cu recovery technologies to reduce their adverse environmental impact. CO32- and Zn are often co-occurring, and thus, selective Cu recovery from these complex liquid streams is required for economic viability. This study assessed 23 sustainable biosorbents classified as tannin-rich, lignin-rich, chitosan/chitin, dead biomass, macroalgae or biochar for their Cu adsorption capacity and selectivity in a complex NH3-bearing bioleachate. Under a preliminary screen with 12 mM Cu in 1 M ammoniacal solution, most biosorbents showed optimal Cu adsorption at pH 11, with pinecone remarkably showing high removal efficiencies (up to 68%) at all tested pH values. Further refinements on select biosorbents with pH, contact time, and presence of NH3, Zn and CO32- showed again that pinecone has a high maximum adsorption capacity (1.07 mmol g-1), worked over pH 5-12 and was Cu-selective with 3.97 selectivity quotient (KCu/Zn). Importantly, pinecone performance was maintained in a real Cu/NH3/Zn/CO32- bioleachate, with 69.4% Cu removal efficiency. Unlike synthetic adsorbents, pinecones require no pre-treatment, which together with its abundance, selectivity, and efficiency without the need for prior NH3 removal, makes it a competitive and sustainable Cu biosorbent for complex Cu-NH3 bearing streams. Overall, this study demonstrated the potential of integrating bioleaching and biosorption as a clean Cu recovery technology utilizing only sustainable resources (i.e., bio-lixiviant and biosorbents). This presents a closed-loop approach to Cu extraction and recovery from wastes, thus effectively addressing elemental sustainability.
△ Less
Submitted 25 August, 2021;
originally announced August 2021.
-
Continuous-feed nanocasting process for the synthesis of bismuth nanowire composites
Authors:
K. Vandaele,
J. P. Heremans,
I. Van Driessche,
P. Van Der Voort,
K. De Buysser
Abstract:
We present a novel, continuous-feed nanocasting procedure for the synthesis of bismuth nanowire structures embedded in the pores of a mesoporous silica template. The immobilization of a bismuth salt inside the silica template from a diluted metal salt solution yields a sufficiently high loading to obtain electrically conducting bulk nanowire composite samples after reduction and sintering the nano…
▽ More
We present a novel, continuous-feed nanocasting procedure for the synthesis of bismuth nanowire structures embedded in the pores of a mesoporous silica template. The immobilization of a bismuth salt inside the silica template from a diluted metal salt solution yields a sufficiently high loading to obtain electrically conducting bulk nanowire composite samples after reduction and sintering the nanocomposite powders. Electrical resistivity measurements of sintered bismuth nanowires embedded in the silica template reveal size-quantization effects.
△ Less
Submitted 2 August, 2017;
originally announced August 2017.
-
Atomic layer deposition-based tuning of the pore size in mesoporous thin films studied by in situ grazing incidence small angle x-ray scattering
Authors:
Jolien Dendooven,
Kilian Devloo-Casier,
Matthias Ide,
Kathryn Grandfield,
Mert Kurttepeli,
Karl F. Ludwig,
Sara Bals,
Pascal Van Der Voort,
Christophe Detavernier
Abstract:
Atomic layer deposition (ALD) enables the conformal coating of porous materials, making the technique suitable for pore size tuning at the atomic level, e.g., for applications in catalysis, gas separation and sensing. It is, however, not straightforward to obtain information about the conformality of ALD coatings deposited in pores with diameters in the low mesoporous regime (< 10 nm). In this wor…
▽ More
Atomic layer deposition (ALD) enables the conformal coating of porous materials, making the technique suitable for pore size tuning at the atomic level, e.g., for applications in catalysis, gas separation and sensing. It is, however, not straightforward to obtain information about the conformality of ALD coatings deposited in pores with diameters in the low mesoporous regime (< 10 nm). In this work, it is demonstrated that in situ synchrotron based grazing incidence small angle x-ray scattering (GISAXS) can provide valuable information on the change in density and internal surface area during ALD of TiO2 in a porous titania film with small mesopores (3-8 nm). The results are shown to be in good agreement with in situ x-ray fluorescence data representing the evolution of the amount of Ti atoms deposited in the porous film. Analysis of both data sets indicates that the minimum pore diameter that can be achieved by ALD is determined by the size of the Ti-precursor molecule.
△ Less
Submitted 25 February, 2015;
originally announced February 2015.
-
DMRG-SCF study of the singlet, triplet, and quintet states of oxo-Mn(Salen)
Authors:
Sebastian Wouters,
Thomas Bogaerts,
Pascal Van Der Voort,
Veronique Van Speybroeck,
Dimitri Van Neck
Abstract:
We use CheMPS2, our free open-source spin-adapted implementation of the density matrix renormalization group (DMRG) [Wouters et al., Comput. Phys. Commun. 185, 1501 (2014)], to study the lowest singlet, triplet, and quintet states of the oxo-Mn(Salen) complex. We describe how an initial approximate DMRG calculation in a large active space around the Fermi level can be used to obtain a good set of…
▽ More
We use CheMPS2, our free open-source spin-adapted implementation of the density matrix renormalization group (DMRG) [Wouters et al., Comput. Phys. Commun. 185, 1501 (2014)], to study the lowest singlet, triplet, and quintet states of the oxo-Mn(Salen) complex. We describe how an initial approximate DMRG calculation in a large active space around the Fermi level can be used to obtain a good set of starting orbitals for subsequent complete-active-space or DMRG self-consistent field (CASSCF or DMRG-SCF) calculations. This procedure mitigates the need for a localization procedure, followed by a manual selection of the active space. Per multiplicity, the same active space of 28 electrons in 22 orbitals (28e, 22o) is obtained with the 6-31G*, cc-pVDZ, and ANO-RCC-VDZP basis sets (the latter with DKH2 scalar relativistic corrections). Our calculations provide new insight into the electronic structure of the quintet.
△ Less
Submitted 18 June, 2014; v1 submitted 22 May, 2014;
originally announced May 2014.
