-
Flow Structure near Three Phase Contact Line of Low-Contact-Angle Evaporating Droplets
Authors:
Zhenying Wang,
George Karapetsas,
Prashant Valluri,
Chihiro Inoue
Abstract:
Flow structure near three phase contact line (TPCL) of evaporating liquids plays a significant role in liquid wetting and dewetting, liquid film evaporation and boiling, etc. Despite the wide focus it receives, the interacting mechanisms therein remain elusive and in specific cases, controversial. Here, we reveal the profile of internal flow and elucidate the dominating mechanisms near TPCL of eva…
▽ More
Flow structure near three phase contact line (TPCL) of evaporating liquids plays a significant role in liquid wetting and dewetting, liquid film evaporation and boiling, etc. Despite the wide focus it receives, the interacting mechanisms therein remain elusive and in specific cases, controversial. Here, we reveal the profile of internal flow and elucidate the dominating mechanisms near TPCL of evaporating droplets, using mathematical modelling, microPIV, and infrared thermography. We indicate that for less volatile liquids such as butanol, the flow pattern is dominated by capillary flow. With increasing liquid volatility, e.g., alcohol, the effect of evaporation cooling, under conditions, induces interfacial temperature gradient with cold droplet apex and warm edge. The temperature gradient leads to Marangoni flow that competes with outwarding capillary flow, resulting in the reversal of interfacial flow and the formation of a stagnation point near TPCL. The spatiotemporal variations of capillary velocity and Marangoni velocity are further quantified by mathematically decomposing the tangential velocity of interfacial flow. The conclusions can serve as a theoretical base for explaining deposition patterns from colloidal suspensions, and can be utilized as a benchmark in analyzing more complex liquid systems.
△ Less
Submitted 18 January, 2024;
originally announced January 2024.
-
Intricate Role of Thermal Properties and Volatility in Droplet Spreading: A Generalization to Tanner's Law
Authors:
Zhenying Wang,
George Karapetsas,
Prashant Valluri,
Chihiro Inoue
Abstract:
Droplet spreading is ubiquitous and plays a significant role in liquid-based energy systems, thermal management devices, and microfluidics. While the spreading of non-volatile droplets is quantitatively understood, the spreading and flow transition in volatile droplets remains elusive due to the complexity added by interfacial phase change and non-equilibrium thermal transport. Here we show, using…
▽ More
Droplet spreading is ubiquitous and plays a significant role in liquid-based energy systems, thermal management devices, and microfluidics. While the spreading of non-volatile droplets is quantitatively understood, the spreading and flow transition in volatile droplets remains elusive due to the complexity added by interfacial phase change and non-equilibrium thermal transport. Here we show, using both mathematical modeling and experiments, that the wetting dynamics of volatile droplets can be scaled by the spatial-temporal interplay between capillary, evaporation, and thermal Marangoni effects. We elucidate and quantify these complex interactions using phase diagrams based on systematic theoretical and experimental investigations. A spreading law of evaporative droplets is derived by generalizing Tanner's law (valid for non-volatile liquids) to a full range of liquids with saturation vapor pressure spanning from 10^1 to 10^4 Pa and on substrates with thermal conductivity from 10^{-1} to 10^3 W/m/K. Besides its importance in fluid-based industries, the conclusions also enable a unifying explanation to a series of individual works including the criterion of flow reversal and the state of dynamic wetting, making it possible to control liquid transport in diverse application scenarios.
△ Less
Submitted 23 August, 2023; v1 submitted 8 April, 2023;
originally announced April 2023.
-
Spreading and retraction dynamics of sessileevaporating droplets comprising volatile binary mixtures
Authors:
A. G. L. Williams. G. Karapetsas,
D. Mamalis,
K. Sefiane,
O. K. Matar,
P. Valluri
Abstract:
The dynamics of thin volatile droplets comprising of binary mixtures deposited on a heated substrate are investigated. Using lubrication theory, we develop a novel one-sided model to predict the spreading and retraction of an evaporating sessile axisymmetric droplet formed of a volatile binary mixture on a substrate with high wettability. A thin droplet with a moving contact line is considered, ta…
▽ More
The dynamics of thin volatile droplets comprising of binary mixtures deposited on a heated substrate are investigated. Using lubrication theory, we develop a novel one-sided model to predict the spreading and retraction of an evaporating sessile axisymmetric droplet formed of a volatile binary mixture on a substrate with high wettability. A thin droplet with a moving contact line is considered, taking into account the variation of liquid properties with concentration as well as the effects of inertia. The parameter space is explored and the resultant effects on wetting and evaporation are evaluated. Increasing solutal Marangoni stress enhances spreading rates in all cases, approaching those of superspreading liquids. To validate our model, experiments are conducted with binary ethanol-water droplets spreading on hydrophilic glass slides heated from below. The spreading rate is quantified, revealing that preferential evaporation of the more volatile component (ethanol) at the contact line drives superspreading, leading in some cases to a contact line instability. Good qualitative agreement is found between our model and experiments, with quantitative agreement being achieved in terms of spreading rate.
△ Less
Submitted 22 September, 2020;
originally announced September 2020.
-
The stability of slowly evaporating thin liquid films of binary mixtures
Authors:
R. K. Nazareth,
G. Karapetsas,
K. Sefiane,
O. Matar,
P. Valluri
Abstract:
We consider the evaporation of a thin liquid layer which consists of a binary mixture of volatile liquids. The mixture is on top of a heated substrate and in contact with the gas phase that consists of the same vapour as the binary mixture. The effect of thermocapillarity, solutocapillarity and the van der Waals interactions are considered. We derive the long-wave evolution equations for the free…
▽ More
We consider the evaporation of a thin liquid layer which consists of a binary mixture of volatile liquids. The mixture is on top of a heated substrate and in contact with the gas phase that consists of the same vapour as the binary mixture. The effect of thermocapillarity, solutocapillarity and the van der Waals interactions are considered. We derive the long-wave evolution equations for the free interface and the volume fraction that govern the two-dimensional stability of the layer subject to the above coupled mechanisms and perform a linear stability analysis. Our results demonstrate two modes of instabilities, a monotonic instability mode and an oscillatory instability mode. We supplement our results from stability analysis with transient simulations to examine the dynamics in the nonlinear regime and analyse how these instabilities evolve with time. More precisely we discuss how the effect of relative volatility along with the competition between thermal and solutal Marangoni effect defines the mode of instability that develops during the evaporation of the liquid layer due to preferential evaporation of one of the components.
△ Less
Submitted 24 August, 2020;
originally announced August 2020.
-
Simplified TPLS as a learning tool for high-performance computational fluid dynamics
Authors:
James Fannon,
Jean-Christophe Loiseau,
Prashant Valluri,
Iain Bethune,
Lennon O'Naraigh
Abstract:
We introduce a modified and simplified version of the pre-existing fully parallelized three-dimensional Navier--Stokes flow solver known as TPLS. We demonstrate how the simplified version can be used as a pedagogical tool for the study of computational fluid dynamics and parallel computing. TPLS is at its heart a two-phase flow solver, and uses calls to a range of external libraries to accelerate…
▽ More
We introduce a modified and simplified version of the pre-existing fully parallelized three-dimensional Navier--Stokes flow solver known as TPLS. We demonstrate how the simplified version can be used as a pedagogical tool for the study of computational fluid dynamics and parallel computing. TPLS is at its heart a two-phase flow solver, and uses calls to a range of external libraries to accelerate its performance. However, in the present context we narrow the focus of the study to basic hydrodynamics and parallel computing techniques, and the code is therefore simplified and modified to simulate pressure-driven single-phase flow in a channel, using only relatively simple Fortran 90 code with MPI parallelization, but no calls to any other external libraries. The modified code is analysed in order to both validate its accuracy and investigate its scalability up to 1000 CPU cores. Simulations are performed for several benchmark cases in pressure-driven channel flow, including a turbulent simulation, wherein the turbulence is incorporated via the large-eddy simulation technique. The work may be of use to advanced undergraduate and graduate students as an introductory study in computational fluid dynamics, while also providing insight for those interested in more general aspects of high-performance computing.
△ Less
Submitted 24 November, 2015;
originally announced November 2015.
-
Linear and nonlinear instability in vertical counter-current laminar gas-liquid flows
Authors:
Patrick Schmidt,
Lennon Ó'Náraigh,
Mathieu Lucquiaud,
Prashant Valluri
Abstract:
We consider the genesis and dynamics of interfacial instability in gas-liquid flows, using as a model the two-dimensional channel flow of a thin falling film sheared by counter-current gas. The methodology is linear stability theory (Orr-Sommerfeld analysis) together with direct numerical simulation of the two-phase flow in the case of nonlinear disturbances. We investigate the influence of three…
▽ More
We consider the genesis and dynamics of interfacial instability in gas-liquid flows, using as a model the two-dimensional channel flow of a thin falling film sheared by counter-current gas. The methodology is linear stability theory (Orr-Sommerfeld analysis) together with direct numerical simulation of the two-phase flow in the case of nonlinear disturbances. We investigate the influence of three main flow parameters (density contrast between liquid and gas, film thickness, pressure drop applied to drive the gas stream) on the interfacial dynamics. Energy budget analyses based on the Orr-Sommerfeld theory reveal various coexisting unstable modes (interfacial, shear, internal) in the case of high density contrasts, which results in mode coalescence and mode competition, but only one dynamically relevant unstable internal mode for low density contrast. The same linear stability approach provides a quantitative prediction for the onset of (partial) liquid flow reversal in terms of the gas and liquid flow rates. A study of absolute and convective instability for low density contrast shows that the system is absolutely unstable for all but two narrow regions of the investigated parameter space. Direct numerical simulations of the same system (low density contrast) show that linear theory holds up remarkably well upon the onset of large-amplitude waves as well as the existence of weakly nonlinear waves. In comparison, for high density contrasts corresponding more closely to an air-water-type system, although the linear stability theory is successful at determining the most-dominant features in the interfacial wave dynamics at early-to-intermediate times, the short waves selected by the linear theory undergo secondary instability and the wave train is no longer regular but rather exhibits chaotic dynamics and eventually, wave overturning.
△ Less
Submitted 16 July, 2015;
originally announced July 2015.
