-
PMMA-grafted graphene nanoplatelets to reinforce the mechanical and thermal properties of PMMA composites
Authors:
Cristina Vallés,
Dimitrios G. Papageorgiou,
Fei Lin,
Zheling Li,
Ben F. Spencer,
Robert J. Young,
Ian A. Kinloch
Abstract:
In order to realise the potential of graphene nanocomposites it is vital to control the degree of dispersion and achieve a strong graphene polymer interface. Herein, we developed a facile grafting to functionalisation approach for graphene nanoplatelets. NH2-terminated graphene nanoplatelets, NH2 GNPs, prepared by a diazonium coupling were used as a platform to covalently graft PMMA chains to the…
▽ More
In order to realise the potential of graphene nanocomposites it is vital to control the degree of dispersion and achieve a strong graphene polymer interface. Herein, we developed a facile grafting to functionalisation approach for graphene nanoplatelets. NH2-terminated graphene nanoplatelets, NH2 GNPs, prepared by a diazonium coupling were used as a platform to covalently graft PMMA chains to the surface of graphene through an amidation between the NH2 groups and PMMA chains, PMMA NH GNPs. A degree of PMMA grafting of 3.8 wt, one chain per 40 carbon atoms, was found to both improve the dispersion of the GNPs in a PMMA matrix and give strong graphene-polymer interfaces compared to as-provided GNPs. Thus, 2 wt of PMMA NH GNPs in PMMA was found to increase the elastic modulus, strength and strain at break of PMMA, whereas the incorporation of unmodified GNPs showed poor levels of reinforcement at all loadings. Furthermore, Tg and Td of PMMA were increased by 15 C and 29 C, respectively, by adding 5 wt of PMMA NH GNPs, whereas incorporating unmodified GNPs led to smaller increases. This work offers the possibility of controlling the properties of graphene-polymer composites through chemically tuning the graphene-polymer interface, which will have broad implications in the field of nanocomposites.
△ Less
Submitted 3 November, 2019;
originally announced November 2019.
-
Graphene/Polyelectrolyte Layer-by-Layer Coatings for Electromagnetic Interference Shielding
Authors:
Cristina Valles,
Xiao Zhang,
Jianyun Cao,
Fei Lin,
Robert J. Young,
Antonio Lombardo,
Andrea C. Ferrari,
Laura Burk,
Rolf Mulhaupt,
Ian A. Kinloch
Abstract:
Electromagnetic interference (EMI) shielding coating materials with thicknesses in the microscale are required in many sectors, including communications, medical, aerospace and electronics, to isolate the electromagnetic radiation emitted from electronic equipment. We report a spray, layer-by-layer (LbL) coating approach to fabricate micron thick, highly-ordered and electrically-conductive coating…
▽ More
Electromagnetic interference (EMI) shielding coating materials with thicknesses in the microscale are required in many sectors, including communications, medical, aerospace and electronics, to isolate the electromagnetic radiation emitted from electronic equipment. We report a spray, layer-by-layer (LbL) coating approach to fabricate micron thick, highly-ordered and electrically-conductive coatings with exceptional EMI shielding effectiveness (EMI SE >4830 dB/mm), through the alternating self-assembly of negatively-charged reduced graphene oxide (RGO) and a positively-charged polyelectrolyte (PEI). The microstructure and resulting electrical properties of the (PEI/RGO)n LbL structures are studied as function of increasing mass of graphene deposited per cycle (kee** the PEI content constant), number of deposited layers (n), flake diameter and type of RGO. A strong effect of the lateral flake dimensions on the electrical properties is observed, which also influences the EMI SE. A maximum EMI SE of 29 dB is obtained for a 6 um thick (PEI/RGO)10 coating with 19 vol.% loading of reduced electrochemically-exfoliated graphene oxide flakes with diameters ~3um. This SE performance exceeds those previously reported for thicker graphene papers and bulk graphene/polymer composite films with higher RGO or graphene nanoplatelets contents, which represents an important step towards the fabrication of thin and light-weight high-performance EMI shielding structures.
△ Less
Submitted 25 June, 2019;
originally announced June 2019.
-
Electrically conductive GNP/epoxy composites for out-of-autoclave thermoset curing through Joule heating
Authors:
Tian Xia,
Desen Zeng,
Zheling Li,
Robert J. Young,
Cristina Valles,
Ian Kinloch
Abstract:
The development of scalable Out of Autoclave (OoA) in situ thermoset curing methods are required to overcome important drawbacks related to the autoclave based processing methods typically used in industry. The incorporation of graphene, an electrothermal carbon nanomaterial with the ability to transform electric energy into heat through Joule heating, emerges as a promising route to replace the c…
▽ More
The development of scalable Out of Autoclave (OoA) in situ thermoset curing methods are required to overcome important drawbacks related to the autoclave based processing methods typically used in industry. The incorporation of graphene, an electrothermal carbon nanomaterial with the ability to transform electric energy into heat through Joule heating, emerges as a promising route to replace the conventional processing methods. In this work the electrical behaviour of both uncured and oven cured GNPs/epoxy composites with loadings of up to 10 wt% were evaluated and electrical percolation thresholds were established for both. Above the critical loading found for oven cured materials (8.5 wt%) the electrically conducting networks of GNPs formed in the matrix showed the ability to act as integrated nanoheaters when an electric current was passed through them, successfully curing the composites by Joule heating. Composites prepared by this OoA curing method (as an alternative to the traditional oven based one) at 10 wt% loading of GNPs were also prepared and compared to the oven cured ones. They showed more compact composite structures, with less microvoids and a preferred orientation of the GNPs in the matrix relative to the oven cured material at identical loading, as revealed by electron microscopy and polarized Raman spectroscopy, respectively. This microstructure and anisotropy induced by the electrically induced (i.e. OoA) cure led to GNPs/epoxy composites with superior electrical and mechanical properties (revealed by tensile testing). The well distributed GNP nanoparticles acting as nanoheaters integrated in a thermosetting matrix, in combination with excellent mechanical and electrical performances achieved for the overall graphene/epoxy composites and the simplicity associated to the method, should open the door to novel industrial applications.
△ Less
Submitted 9 April, 2019; v1 submitted 5 April, 2019;
originally announced April 2019.
-
Preparation of clean surfaces and Se vacancy formation in Bi$_{2}$Se$_{3}$ by ion bombardment and annealing
Authors:
Weimin Zhou,
Haoshan Zhu,
Connie M. Valles,
Jory A. Yarmoff
Abstract:
Bismuth Selenide (Bi$_{2}$Se$_{3}$) is a topological insulator (TI) with a structure consisting of stacked quintuple layers. Single crystal surfaces are commonly prepared by mechanical cleaving. This work explores the use of low energy Ar$^{+}$ ion bombardment and annealing (IBA) as an alternative method to produce reproducible and stable Bi$_{2}$Se$_{3}$ surfaces under ultra-high vacuum (UHV). It…
▽ More
Bismuth Selenide (Bi$_{2}$Se$_{3}$) is a topological insulator (TI) with a structure consisting of stacked quintuple layers. Single crystal surfaces are commonly prepared by mechanical cleaving. This work explores the use of low energy Ar$^{+}$ ion bombardment and annealing (IBA) as an alternative method to produce reproducible and stable Bi$_{2}$Se$_{3}$ surfaces under ultra-high vacuum (UHV). It is found that a well-ordered surface can be prepared by a single cycle of 1 keV Ar$^{+}$ ion bombardment and 30 min of annealing. Low energy electron diffraction (LEED) and detailed low energy ion scattering (LEIS) measurements show no differences between IBA-prepared surfaces and those prepared by $\textit{in situ}$ cleaving in UHV. Analysis of the LEED patterns shows that the optimal annealing temperature is 450°C. Angular LEIS scans reveal the formation of surface Se vacancies when the annealing temperature exceeds 520°C.
△ Less
Submitted 15 December, 2016;
originally announced December 2016.
-
NEOPROP: a NEO Propagator for Space Situational Awareness
Authors:
V. Zuccarelli,
D. Bancelin,
S. Weikert,
W. Thuillot,
D. Hestroffer,
C. Y. Valles,
D. Koschny
Abstract:
The overall aim of the Space Situational Awareness (SSA) Preparatory Programme is to support the European independent utilisation of and access to space for research or services, through providing timely and quality data, information, services and knowledge regarding the environment, the threats and the sustainable exploitation of the outer space surrounding our planet Earth. The SSA system will c…
▽ More
The overall aim of the Space Situational Awareness (SSA) Preparatory Programme is to support the European independent utilisation of and access to space for research or services, through providing timely and quality data, information, services and knowledge regarding the environment, the threats and the sustainable exploitation of the outer space surrounding our planet Earth. The SSA system will comprise three main segments: Space Weather (SWE) monitoring and forecast Near-Earth Objects (NEO) survey and follow-up Space Surveillance and Tracking (SST) of man-made space objects. There already exist different algorithms to predict orbits for NEOs. The objective of this activity is to come up with a different trajectory prediction algorithm, which allows an independent validation of the current algorithms within the SSA-NEO segment (e.g. NEODyS, JPL Sentry System). The key objective of this activity was to design, develop, test, verify, and validate trajectory prediction algorithm of NEOs in order to be able to compute analytically and numerically the minimum orbital intersection distances (MOIDs). The NEOPROP software consists of two separate modules/tools: (i) the Analytical Module makes use of analytical algorithms in order to rapidly assess the impact risk of a NEO. (ii) The Numerical Module makes use of numerical algorithms in order to refine and to better assess the impact probabilities.
△ Less
Submitted 31 August, 2016;
originally announced August 2016.