Showing 1–50 of 76 results for author: Valeriani, C

Anomalous behaviour of transport properties in a supercooled water-glycerol mixture

Authors: Alberto Zaragoza, Rajat Kumar, Jose Martín Roca, Prabir Khatua, Valeria Molinero, Frédéric Caupin, Chantal Valeriani

Abstract: Glycerol acts as a natural cryoprotectant by depressing the temperature of ice nucleation and slowing down the dynamics of water mixtures. In this work we characterize dynamics -- diffusion, viscosity, and hydrogen-bond dynamics -- as well as density anomaly and structure of water mixtures with 1\% to 50\% w/w glycerol at low temperatures via molecular dynamics simulations using all-atom and coars… ▽ More Glycerol acts as a natural cryoprotectant by depressing the temperature of ice nucleation and slowing down the dynamics of water mixtures. In this work we characterize dynamics -- diffusion, viscosity, and hydrogen-bond dynamics -- as well as density anomaly and structure of water mixtures with 1\% to 50\% w/w glycerol at low temperatures via molecular dynamics simulations using all-atom and coarse-grained models. Simulations reveal distinct violations of the Stokes-Einsten relation in the low temperature regime for water and glycerol. Deviations are positive for water at all concentrations, and positive for glycerol in very dilute solutions but turning negative in concentrated ones. The all-atom and coarse-grained models reveal an unexpected crossover in the dynamics of the 1% and 10 % w/w glycerol at the lowest simulated temperatures. This crossover manifests in the diffusion coefficients of water and glycerol, as well as in the viscosity and lifetime of hydrogen-bonds in water. We interpret that the crossover originates on the opposing dependence with glycerol concentration of the two factors controlling the solution's slow-down: the increase in tetrahedrally coordinated water and the dynamics and clustering of the glycerol molecules. We anticipate that this dynamic crossover will also occur for solution of water with other polyols. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: Anomalies; Transport properties; Mixtures; Water; Viscosity; Simulations

Self-Assembly of Active Bivalent Patchy Particles

Authors: Caterina Landi, John Russo, Francesco Sciortino, Chantal Valeriani

Abstract: In the present work, with the intent of exploring the out-of-equilibrium polymerization of active patchy particles in linear chains, we study a suspension of active bivalent Brownian particles (ABBPs). At all studied temperatures and densities, ABBPs self-assemble in aggregating chains, as opposed to the uniformly space-distributed chains observed in the corresponding passive systems. The main eff… ▽ More In the present work, with the intent of exploring the out-of-equilibrium polymerization of active patchy particles in linear chains, we study a suspension of active bivalent Brownian particles (ABBPs). At all studied temperatures and densities, ABBPs self-assemble in aggregating chains, as opposed to the uniformly space-distributed chains observed in the corresponding passive systems. The main effect of activity, other than inducing chain aggregation, is to reduce the chain length and favor alignment of the propulsion vectors in the bonding process. At low activities, attraction dominates over activity in the bonding process, leading self-assembly to occur randomly regardless of the particle orientations.Interestingly, we find that at the lowest temperature, as density increases, chains aggregate forming a novel state: MISP, i.e., Motility-Induced Spirals, where spirals are characterised by a finite angular velocity. On the contrary, at the highest temperature, density and activity, chains aggregate forming a different novel state (a spinning crystalline cluster) characterized by a compact and hexagonal ordered structure, both translating and rotating. The rotation arises from an effective torque generated by the presence of competing domains where particles self-propel in the same direction. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Collective motion of energy depot active disks

Authors: Juan Pablo Miranda, Demian Levis, Chantal Valeriani

Abstract: In the present work we have studied collectives of active disks with an energy depot, moving in the two-dimensional plane and interacting via excluded volume. The energy depot accounts for the extraction of energy taking place at the level of each particle in order to perform self-propulsion, included in an underdampled Langevin dynamics. We show that this model undergoes a flocking transition, ex… ▽ More In the present work we have studied collectives of active disks with an energy depot, moving in the two-dimensional plane and interacting via excluded volume. The energy depot accounts for the extraction of energy taking place at the level of each particle in order to perform self-propulsion, included in an underdampled Langevin dynamics. We show that this model undergoes a flocking transition, exhibiting some of the key features of the Vicsek model, namely, band formation and giant number fluctuations. Large density bands disappear as the activity is further increased, eventually reaching a homogeneous polar state. We unravel an effective alignment interaction at the level of two-particle collisions that can be controlled by activity and gives rise to flocking at large scales. △ Less

Submitted 3 July, 2024; v1 submitted 28 June, 2024; originally announced June 2024.

Tangentially Active Polymers in Cylindrical Channels

Authors: José Martín-Roca, Emanuele Locatelli, Valentino Bianco, Paolo Malgaretti, Chantal Valeriani

Abstract: We present an analytical and computational study characterizing the structural and dynamical properties of an active filament confined in cylindrical channels. We first outline the effects of the interplay between confinement and polar self-propulsion on the conformation of the chains. We observe that the scaling of the polymer size in the channel, quantified by the end-to-end distance, shows diff… ▽ More We present an analytical and computational study characterizing the structural and dynamical properties of an active filament confined in cylindrical channels. We first outline the effects of the interplay between confinement and polar self-propulsion on the conformation of the chains. We observe that the scaling of the polymer size in the channel, quantified by the end-to-end distance, shows different anomalous behaviours at different confinement and activity conditions. Interestingly, we show that the universal relation, describing the ratio between the end-to-end distance of passive polymer chains in cylindrical channels and in bulk is broken by activity. Finally, we show that the long-time diffusion coefficient under confinement can be rationalised by an analytical model, that takes into account the presence of the channel and the elongated nature of the polymer. △ Less

Submitted 3 May, 2024; originally announced May 2024.

Comments: 11 pages, 8 figures and supplemental 5 pages, 7 figures; Submission to SciPost

Coil-to-globule collapse of active polymers: a Rouse perspective

Authors: P. Malgaretti, E. Locatelli, C. Valeriani

Abstract: We derive an effective Rouse model for tangentially active polymers, characterized by a constant active force tangent to their backbone. In particular, we show that, once extended to account for finite bending rigidity, such active Rouse model captures the reduction in the gyration radius, or coil-to-globule-like transition, that has been observed numerically in the literature for such active fila… ▽ More We derive an effective Rouse model for tangentially active polymers, characterized by a constant active force tangent to their backbone. In particular, we show that, once extended to account for finite bending rigidity, such active Rouse model captures the reduction in the gyration radius, or coil-to-globule-like transition, that has been observed numerically in the literature for such active filaments. Interestingly, our analysis identifies the proper definition of the Peclet number, that allows to collapse all numerical data onto a master curve. △ Less

Submitted 18 April, 2024; originally announced April 2024.

The carnivorous plant Genlisea harnesses active particle dynamics to prey on microfauna

Authors: José Martín-Roca, C. Miguel Barriuso-Gutiérrez, Raúl Martínez Fernández, Camila Betterelli Giuliano, Rong**g Zhang, Chantal Valeriani, Laurence G. Wilson

Abstract: Carnivory in plants is an unusual trait that has arisen multiple times, independently, throughout evolutionary history. Plants in the genus Genlisea are carnivorous, and feed on microorganisms that live in soil using modified subterranean leaf structures (rhizophylls). A surprisingly broad array of microfauna has been observed in the plants' digestive chambers, including ciliates, amoebae and soil… ▽ More Carnivory in plants is an unusual trait that has arisen multiple times, independently, throughout evolutionary history. Plants in the genus Genlisea are carnivorous, and feed on microorganisms that live in soil using modified subterranean leaf structures (rhizophylls). A surprisingly broad array of microfauna has been observed in the plants' digestive chambers, including ciliates, amoebae and soil mites. Here we show, through experiments and simulations, that Genlisea exploit active matter physics to 'rectify' bacterial swimming and establish a local flux of bacteria through the structured environment of the rhizophyll towards the plant's digestion vesicle. In contrast, macromolecular digestion products are free to diffuse away from the digestion vesicle and establish a concentration gradient of carbon sources to draw larger microorganisms further inside the plant. Our experiments and simulations show that this mechanism is likely to be a localised one, and that no large-scale efflux of digested matter is present. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Comments: 13 pages 2 figures

Rheology of Pseudomonas fluorescens biofilms: from experiments to predictive DPD mesoscopic modelling

Authors: Jose Mart. n-Roca, Valentino Bianco, Francisco Alarcon, Ajay K. Monnappa, Paolo Natale, Francisco Monroy, Belen Orgaz, Ivan L. pez-Montero, Chantal Valeriani

Abstract: Bacterial biofilms mechanically behave as viscoelastic media consisting of micron-sized bacteria crosslinked to a selfproduced network of extracellular polymeric substances (EPS) embedded in water. Structural principles for numerical modelling aim at describing mesoscopic viscoelasticity without loosing detail on the underlying interactions existing in wide regimes of deformation under hydrodynami… ▽ More Bacterial biofilms mechanically behave as viscoelastic media consisting of micron-sized bacteria crosslinked to a selfproduced network of extracellular polymeric substances (EPS) embedded in water. Structural principles for numerical modelling aim at describing mesoscopic viscoelasticity without loosing detail on the underlying interactions existing in wide regimes of deformation under hydrodynamic stress. Here we approach the computational challenge to model bacterial biofilms for predictive mechanics in silico under variable stress conditions. Up-to-date models are not entirely satisfactory due to the plethora of parameters required to make them functioning under the effects of stress. As guided by the structural depiction gained in a previous work with Pseudomonas fluorescens (Jara et al. Front. Microbiol. (2021)), we propose a mechanical modeling by means of Dissipative Particle Dynamics (DPD), which captures the essentials of the topological and compositional interactions between bacteria particles and crosslinked EPS-embedding under imposed shear. The P. fluorescens biofilms have been modeled under mechanical stress mimicking shear stresses as undergone in vitro. The predictive capacity for mechanical features in DPD-simulated biofilms has been investigated by varying the externally imposed field of shear strain at variable amplitude and frequency. The parametric map of essential biofilm ingredients has been explored by making the rheological responses to emerge among conservative mesoscopic interactions and frictional dissipation in the underlying microscale. The proposed coarse grained DPD simulation qualitatively catches the rheology of the P. fluorescens biofilm over several decades of dynamic scaling. △ Less

Submitted 31 July, 2023; originally announced July 2023.

Journal ref: J. Chem. Phys. 158, 074902 (2023)

Minimal numerical ingredients describe chemical microswimmers's 3D motion

Authors: Maximilian R. Bailey, C. Miguel Barriuso Gutiérrez, José Martín-Roca, Vincent Niggel, Virginia Carrasco-Fadanelli, Ivo Buttinoni, Ignacio Pagonabarraga, Lucio Isa, Chantal Valeriani

Abstract: The underlying mechanisms and physics of catalytic Janus microswimmers is highly complex, requiring details of the associated phoretic fields and the physiochemical properties of catalyst, particle, boundaries, and the fuel used. Therefore, develo** a minimal (and more general) model capable of capturing the overall dynamics of these autonomous particles is highly desirable. In the presented wor… ▽ More The underlying mechanisms and physics of catalytic Janus microswimmers is highly complex, requiring details of the associated phoretic fields and the physiochemical properties of catalyst, particle, boundaries, and the fuel used. Therefore, develo** a minimal (and more general) model capable of capturing the overall dynamics of these autonomous particles is highly desirable. In the presented work, we demonstrate that a coarse-grained dissipative particle-hydrodynamics model is capable of describing the behaviour of various chemical microswimmer systems. Specifically, we show how a competing balance between hydrodynamic interactions experienced by a squirmer in the presence of a substrate, gravity, and mass and shape asymmetries can reproduce a range of dynamics seen in different experimental systems. We hope that our general model will inspire further synthetic work where various modes of swimmer motion can be encoded via shape and mass during fabrication, hel** to realise the still outstanding goal of microswimmers capable of complex 3-D behaviour △ Less

Submitted 30 July, 2023; originally announced July 2023.

Self-organized states of solutions of active ring polymers in bulk and under confinement

Authors: Juan Pablo Miranda-López, Emanuele Locatelli, Chantal Valeriani

Abstract: In the presented work we study, by means of numerical simulations, the behaviour of a suspension of active ring polymers in the bulk and under lateral confinement. When changing the separation between the confining planes and the polymers' density, we detect the emergence of a self-organised dynamical state, characterised by the coexistence of slowly diffusing clusters of rotating disks and faster… ▽ More In the presented work we study, by means of numerical simulations, the behaviour of a suspension of active ring polymers in the bulk and under lateral confinement. When changing the separation between the confining planes and the polymers' density, we detect the emergence of a self-organised dynamical state, characterised by the coexistence of slowly diffusing clusters of rotating disks and faster rings moving in between them. This system represents a peculiar case at the crossing point between polymer, liquid crystals and active matter physics, where the interplay between activity, topology and confinement leads to a spontaneous segregation of a one component solution. △ Less

Submitted 28 July, 2023; originally announced July 2023.

Comments: 26 pages (single column), 10 figures

Non-monotonous translocation time of polymers across pores

Authors: Emanuele Locatelli, Valentino Bianco, Chantal Valeriani, Paolo Malgaretti

Abstract: Polymers confined in corrugated channels, i.e. channels of varying amplitude, display {multiple local maxima and minima of the diffusion coefficient upon increasing their degree of polymerization $N$}. We propose a theoretical effective free energy for linear polymers based on a Fick-Jacobs approach. We validate the predictions against numerical data, obtaining quantitative agreement for {the effe… ▽ More Polymers confined in corrugated channels, i.e. channels of varying amplitude, display {multiple local maxima and minima of the diffusion coefficient upon increasing their degree of polymerization $N$}. We propose a theoretical effective free energy for linear polymers based on a Fick-Jacobs approach. We validate the predictions against numerical data, obtaining quantitative agreement for {the effective free energy, the diffusion coefficient and the Mean First Passage Time}. Finally, we employ the effective free energy to compute the polymer lengths $N_{min}$ at which the diffusion coefficient presents a minimum: we find a scaling expression that we rationalize with a blob model. Our results could be useful to design porous adsorbers, that separate polymers of different sizes without the action of an external flow. △ Less

Submitted 25 August, 2023; v1 submitted 10 May, 2023; originally announced May 2023.

Comments: 6 pages,7 figures + Supplemental 4 pages, 6 figures

Colloidal Hard Spheres: Triumphs, Challenges and Mysteries

Authors: C. Patrick Royall, Patrick Charbonneau, Marjolein Dijkstra, John Russo, Frank Smallenburg, Thomas Speck, Chantal Valeriani

Abstract: The simplicity of hard spheres as a model system is deceptive. Although the particles interact solely through volume exclusion, that nevertheless suffices for a wealth of static and dynamical phenomena to emerge, making the model an important target for achieving a comprehensive understanding of matter. In addition, while real colloidal suspensions are typically governed by complex interactions, P… ▽ More The simplicity of hard spheres as a model system is deceptive. Although the particles interact solely through volume exclusion, that nevertheless suffices for a wealth of static and dynamical phenomena to emerge, making the model an important target for achieving a comprehensive understanding of matter. In addition, while real colloidal suspensions are typically governed by complex interactions, Pusey and Van Megen [Nature 320 340--342 (1986)] demonstrated that suitably tuned suspensions result in hard-sphere like behavior, thus bringing a valuable experimental complement to the celebrated theoretical model. Colloidal hard spheres are thus both a material in their own right and a platform upon which phenomena exhibited by simple materials can be explored in great detail. These various purposes enable a particular synergy between experiment, theory and computer simulation. Here we review the extensive body of work on hard spheres, ranging from their equilibrium properties such as phase behavior, interfaces and confinement to some of the non--equilibrium phenomena they exhibit such as sedimentation, glass formation and nucleation. △ Less

Submitted 22 May, 2023; v1 submitted 3 May, 2023; originally announced May 2023.

Comments: 97 pages

Rheology of Pseudomonas fluorescens biofilms: from experiments to DPD mesoscopic modelling

Authors: Jose Martin Roca, Valentino Bianco, Francisco Alarcon, Ajay K. Monnappa, Paolo Natale, Francisco Monroy, Belen Orgaz, Ivan Lopez-Montero, Chantal Valeriani

Abstract: The presence of bacterial biofilms in clinical and industrial settings is a major issue worldwide. A biofilm is a viscoelastic matrix, composed of bacteria producing a network of Extracellular Polymeric Substances (EPS) to which bacteria crosslink. Modelling of complex biofilms is relevant to provide accurate descriptions and predictions that include parameters as hydrodynamics, dynamics of the ba… ▽ More The presence of bacterial biofilms in clinical and industrial settings is a major issue worldwide. A biofilm is a viscoelastic matrix, composed of bacteria producing a network of Extracellular Polymeric Substances (EPS) to which bacteria crosslink. Modelling of complex biofilms is relevant to provide accurate descriptions and predictions that include parameters as hydrodynamics, dynamics of the bacterial population and solute mass transport. However, up-to-date numerical modelling, even at a coarse-grained level, is not satisfactorily. In this work, we present a numerical coarse-grain model of a bacterial biofilm, consisting of bacteria immersed in an aqueous matrix of a polymer network, that allows to study rheological properties of a biofilm. We study its viscoelastic modulus, varying topology and composition (such as the number of crosslinks between EPS polymers, the number of bacteria and the amount of solvent), and compare the numerical results with experimental rheological data of Pseudomonas fluorescens biofilms grown under static and shaking conditions, as previously described by Jara et al, Frontiers in Microbiology (2021). △ Less

Submitted 22 April, 2022; originally announced April 2022.

Simulating active agents under confinement with Dissipative Particles (hydro)Dynamics

Authors: Carlos Miguel Barriuso Gutierrez, Jose Martin-Roca, Valentino Bianco, Ignacio Pagonabarraga, Chantal Valeriani

Abstract: We study active agents embedded in bulk or in confinement explicitly considering hydrodynamics and simulating the swimmers via an implementation inspired by the squirmer model. We develop a Dissipative Particle Dynamics scheme for the solvent. This approach allows us to properly deal not only with hydrodynamics but also with thermal fluctuations. On the other side, this approach enables us to stud… ▽ More We study active agents embedded in bulk or in confinement explicitly considering hydrodynamics and simulating the swimmers via an implementation inspired by the squirmer model. We develop a Dissipative Particle Dynamics scheme for the solvent. This approach allows us to properly deal not only with hydrodynamics but also with thermal fluctuations. On the other side, this approach enables us to study active agents with complex shapes, ranging from spherical colloids to polymers. To start with, we study a simple spherical colloid. We analyze the features of the velocity fields of the surrounding solvent, when the colloid is a pusher, a puller or a neutral swimmer either in bulk or confined in a cylindrical channel. Next, we characterise its dynamical behaviour by computing the mean square displacement and the long time diffusion when the active colloid is in bulk or in a channel (varying its radius) and analyze the orientation autocorrelation function in the latter case. While the three studied squirmer types are characterised by the same bulk diffusion, the cylindrical confinement considerably modulates the diffusion and the orientation autocorrelation function. Finally, we focus our attention on a more complex shape: an active polymer. We first characterise the structural features computing its radius of gyration when in bulk or in cylindrical confinement, and compare to known results obtained without hydrodynamics. Next, we characterise the dynamical behaviour of the active polymer by computing its mean square displacement and the long time diffusion. On the one hand, both diffusion and radius of gyration decrease due to the hydrodynamic interaction when the system is in bulk. On the other hand, the effect of confinement is to decrease the radius of gyration, disturbing the motion of the polymer and thus reducing its diffusion. △ Less

Submitted 22 April, 2022; originally announced April 2022.

Discovering dynamic laws from observations: the case of self-propelled, interacting colloids

Authors: Miguel Ruiz-Garcia, C. Miguel Barriuso Gutierrez, Lachlan C. Alexander, Dirk G. A. L. Aarts, Luca Ghiringhelli, Chantal Valeriani

Abstract: Active matter spans a wide range of time and length scales, from groups of cells and synthetic self-propelled particles to schools of fish, flocks of birds, or even human crowds. The theoretical framework describing these systems has shown tremendous success at finding universal phenomenology. However, further progress is often burdened by the difficulty of determining the forces that control the… ▽ More Active matter spans a wide range of time and length scales, from groups of cells and synthetic self-propelled particles to schools of fish, flocks of birds, or even human crowds. The theoretical framework describing these systems has shown tremendous success at finding universal phenomenology. However, further progress is often burdened by the difficulty of determining the forces that control the dynamics of the individual elements within each system. Accessing this local information is key to understanding the physics dominating the system and to create the models that can explain the observed collective phenomena. In this work, we present a machine-learning model, a graph neural network, that uses the collective movement of the system to learn the active and two-body forces controlling the individual dynamics of the particles. We verify our approach using numerical simulations of active brownian particles, considering different interaction potentials and levels of activity. Finally, we apply our model to experiments of electrophoretic Janus particles, extracting the active and two-body forces that control the dynamics of the colloids. Due to this, we can uncover the physics dominating the behavior of the system. We extract an active force that depends on the electric field and also area fraction. We also discover a dependence of the two-body interaction with the electric field that leads us to propose that the dominant force between these colloids is a screened electrostatic interaction with a constant length scale. We expect that this methodology can open a new avenue for the study and modeling of experimental systems of active particles. △ Less

Submitted 19 July, 2023; v1 submitted 28 March, 2022; originally announced March 2022.

Rotating Micro-Spheres for Adsorption Monitoring at a Fluid Interface

Authors: J. Martín-Roca, M. Jiménez, F. Ortega, C. Calero, Ch. Valeriani, R. G. Rubio, F. Martínez-Pedrero

Abstract: Hypothesis: A broad range of phenomena, such as emulsification and emulsion stability, foam formation or liquid evaporation, are closely related to the dynamics of adsorbing colloidal particles. Elucidation of the mechanisms implied is key to a correct design of many different types of materials. Experiments: Microspheres forced to rotate near a fluid interface exhibit a roto-translational hydro… ▽ More Hypothesis: A broad range of phenomena, such as emulsification and emulsion stability, foam formation or liquid evaporation, are closely related to the dynamics of adsorbing colloidal particles. Elucidation of the mechanisms implied is key to a correct design of many different types of materials. Experiments: Microspheres forced to rotate near a fluid interface exhibit a roto-translational hydrodynamic mechanism that is hindered by capillary torques as soon as the particles protrude the interface. Under these conditions, the time evolution in the ratio of moving spheres provides a direct description of the adsorption kinetics, while microscopy monitoring of particle acceleration\deceleration informs about the adsorption\desorption dynamics. In this work, the proposed strategy is applied at an air/water interface loaded with spherical magnetic particles negatively charged, forced to rotate by the action of a rotating magnetic field. Findings: The proposed method enables the adsorption/desorption dynamics to be followed during the earliest phase of the process, when desorption of a small fraction of particles is detected, as well as to estimate approximated values of the adsorption/desorption constants. The results obtained show that the addition of a monovalent salt or a cationic (anionic) surfactant promotes (inhibits) both adsorption and formation of permanent bonds between particles. △ Less

Submitted 19 February, 2022; originally announced February 2022.

Journal ref: Journal of Colloid and Interface Science, Volume 614, 15 May 2022, Pages 378-388

Dynamical anomalies and structural features of Active Brownian Particles characterised by two repulsive length scales

Authors: Jose Martin-Roca, Raul Martinez, Fernando Martinez-Pedrero, Jorge Ramirez, Chantal Valeriani

Abstract: In this work we study a two-dimensional system composed by Active Brownian Particles (ABPs) interacting via a repulsive potential with two-length-scales, a soft shell and a hard-core. Depending on the ratio between the strength of the soft shell barrier and the activity, we find two regimes: If this ratio is much larger or smaller than 1, the observed behaviour is comparable with ABPs interacting… ▽ More In this work we study a two-dimensional system composed by Active Brownian Particles (ABPs) interacting via a repulsive potential with two-length-scales, a soft shell and a hard-core. Depending on the ratio between the strength of the soft shell barrier and the activity, we find two regimes: If this ratio is much larger or smaller than 1, the observed behaviour is comparable with ABPs interacting via a single length-scale potential. If this ratio is similar to 1, the two length-scales are relevant for both structure and dynamical properties. On the structural side, when the system exhibits a motility induced phase separation, the dense phase is characterised by new and more complex structures compared with the hexatic phase observed in single length-scale systems. On the dynamical side, as far as we are aware, this is the first representation of an anomalous dynamics in active particles. △ Less

Submitted 24 March, 2022; v1 submitted 8 February, 2022; originally announced February 2022.

Intrinsic structure perspective for MIPS interfaces in two dimensional systems of Active Brownian Particles

Authors: Enrique Chacon, Francisco Alarcon, Jorge Ramirez, Pedro Tarazona, Chantal Valeriani

Abstract: Suspensions of Active Brownian Particles (ABP) undergo motility induced phase separation (MIPS) over a wide range of mean density and activity strength [1], even in the absence of an explicit attraction. Negative values of the mechanical surface tension have been reported, from the total forces across the interface, while the stable fluctuations of the interfacial line would be interpreted as a po… ▽ More Suspensions of Active Brownian Particles (ABP) undergo motility induced phase separation (MIPS) over a wide range of mean density and activity strength [1], even in the absence of an explicit attraction. Negative values of the mechanical surface tension have been reported, from the total forces across the interface, while the stable fluctuations of the interfacial line would be interpreted as a positive capillary surface tension [2], while in equilibrium liquid surfaces these two magnitudes are equal. We present here the analysis of 2D-ABP interfaces in terms of the intrinsic density and force profiles, calculated with the particle distance to the instantaneous interfacial line. Our results provide a new insight in the origin of the MIPS from the local rectification of the random active force on the particles near the interface. As it had been pointed, that effect acts as an external potential [3] that produces a pressure gradient across the interface, so that the mechanical surface tension of the MIPS cannot be described as that of equilibrium coexisting phases; but our analysis shows that most of that effect comes from the tightly caged particles at the dense (inner) side of the MIPS interface, rather than from the free moving particles at the outer side that collide with the dense cluster. Moreover, a clear correlation appears between the decay of the hexatic order parameter at the dense slab and the end of the MIPS as the strength of the active force is lowered. We test that with the strong active forces required for MIPS, the interfacial structure and properties are very similar for ABP with purely repulsive (WCA-LJ model truncated at its minimum) and when the interaction includes a range of the LJ attractive force. △ Less

Submitted 4 February, 2022; originally announced February 2022.

Heterogeneous versus homogeneous crystal nucleation in hard spheres

Authors: Jorge R. Espinosa, Carlos Vega, Chantal Valeriani, Daan Frenkel, Eduardo Sanz

Abstract: Hard-sphere model systems are well-suited in both experiment and simulations to investigate fundamental aspects of the crystallization of fluids. In experiments on colloidal models of hard-sphere fluids, the uid is unavoidably at contact with the walls of the sample cell, where heterogeneous crystallization may take place. In this work we use simulations to investigate the competition between homo… ▽ More Hard-sphere model systems are well-suited in both experiment and simulations to investigate fundamental aspects of the crystallization of fluids. In experiments on colloidal models of hard-sphere fluids, the uid is unavoidably at contact with the walls of the sample cell, where heterogeneous crystallization may take place. In this work we use simulations to investigate the competition between homogeneous and heterogeneous crystallization. We report simulations of wall-induced nucleation for different confining walls. Combining the results of these simulations with earlier studies of homogeneous allows us to asses the competition between homogeneous and heterogeneous nucleation as a function of wall type, fluid density and the system size. On at walls, heterogeneous nucleation will typically overwhelm homogeneous nucleation. However, even for surfaces randomly coated with spheres with a diameter that was some three times larger than that of the fluid spheres - as has been used in some experiments - heterogeneous nucleation is likely to be dominant for volume fractions smaller than 0.535. Only for a disordered coating that has the same structure as the liquid holds promise did we find the nucleation was likely to occur in the bulk. Hence, such coatings might be used to suppress heterogeneous nucleation in experiments. Finally, we report the apparent homogeneous nucleation rate taking into account the formation of crystallites both in the bulk and at the walls. We find that the apparent overall nucleation rates coincides with those reported in "homogeneous nucleation" experiments. This suggests that heterogeneous nucleation at the walls could partly explain the large discrepancies found between experimental measurements and simulation estimates of the homogeneous nucleation rate. △ Less

Submitted 27 April, 2021; originally announced April 2021.

Journal ref: Soft Matter, 15 (47), 9625-9631 (2019)

Self-assembly of active amphiphilic Janus particles

Authors: S. A. Mallory, F. Alarcon, A. Cacciuto, C. Valeriani

Abstract: In this article, we study the phenomenology of a two dimensional dilute suspension of active amphiphilic Janus particles. We analyze how the morphology of the aggregates emerging from their self-assembly depends on the strength and the direction of the active forces. We systematically explore and contrast the phenomenologies resulting from particles with a range of attractive patch coverages. Fina… ▽ More In this article, we study the phenomenology of a two dimensional dilute suspension of active amphiphilic Janus particles. We analyze how the morphology of the aggregates emerging from their self-assembly depends on the strength and the direction of the active forces. We systematically explore and contrast the phenomenologies resulting from particles with a range of attractive patch coverages. Finally, we illustrate how the geometry of the colloids and the directionality of their interactions can be used to control the physical properties of the assembled active aggregates and suggest possible strategies to exploit self-propulsion as a tunable driving force for self-assembly. △ Less

Submitted 23 February, 2021; originally announced February 2021.

Journal ref: New journal of Physics, 19 125014 (2017)

An active approach to colloidal self-assembly

Authors: S. A. Mallory, C. Valeriani, A. Cacciuto

Abstract: In this review we discuss recent advances in the self-assembly of self-propelled colloidal particles and highlight some of the most exciting results in this field with a specific focus on dry active matter. We explore this phenomenology through the lens of the complexity of the colloidal building blocks. We begin by considering the behavior of isotropic spherical particles. We then discuss the cas… ▽ More In this review we discuss recent advances in the self-assembly of self-propelled colloidal particles and highlight some of the most exciting results in this field with a specific focus on dry active matter. We explore this phenomenology through the lens of the complexity of the colloidal building blocks. We begin by considering the behavior of isotropic spherical particles. We then discuss the case of amphiphilic and dipolar Janus particles. Finally, we show how the geometry of the colloids and/or the directionality of their interactions can be used to control the physical properties of the assembled active aggregates, and suggest possible strategies on how to exploit activity as a tunable driving force for self-assembly. The unique properties of active colloids lend promise for the design of the next generation of functional, environment-sensing microstructures able to perform specific tasks in an autonomous and targeted manner. △ Less

Submitted 23 February, 2021; originally announced February 2021.

Journal ref: Ann Rev Phys Chem, 69, 59 (2018)

In-silico modeling of early-stage biofilm formation

Authors: Pin Nie, Francisco Alarcon Oseguera, Ivan Lopez-Montero, Belen Orgaz, Chantal Valeriani, Massimo Pica Ciamarra

Abstract: Several bacteria and bacteria strands form biofilms in different environmental conditions, e.g. pH, temperature, nutrients, etc. Biofilm growth, therefore, is an extremely robust process. Because of this, while biofilm growth is a complex process affected by several variables, insights into biofilm formation could be obtained studying simple schematic models. In this manuscript, we describe a hybr… ▽ More Several bacteria and bacteria strands form biofilms in different environmental conditions, e.g. pH, temperature, nutrients, etc. Biofilm growth, therefore, is an extremely robust process. Because of this, while biofilm growth is a complex process affected by several variables, insights into biofilm formation could be obtained studying simple schematic models. In this manuscript, we describe a hybrid molecular dynamics and Monte Carlo model for the simulation of the early stage formation of a biofilm, to explicitly demonstrate that it is possible to account for most of the processes expected to be relevant. The simulations account for the growth and reproduction of the bacteria, for their interaction and motility, for the synthesis of extracellular polymeric substances and Psl trails. We describe the effect of these processes on the early stage formation of biofilms, in two dimensions, and also discuss preliminary three-dimensional results. △ Less

Submitted 25 January, 2021; originally announced January 2021.

Comments: This article has been accepted for publication in Soft Materials, published by Taylor & Francis

Influence of water models on water movement through AQP1

Authors: Miguel A. Gonzalez, Alberto Zaragoza, Charlotte I. Lynch, Mark S. P. Sansom, Chantal Valeriani

Abstract: Water diffusion through membrane proteins is a key aspect of cellular function. Essential processes of cellular metabolism are driven by osmotic pressure, which depends on water channels. Membrane proteins such as aquaporins (AQPs) are responsible for enabling water transport through the cell membrane. AQPs are highly selective, allowing only water and relatively small polar molecules to cross the… ▽ More Water diffusion through membrane proteins is a key aspect of cellular function. Essential processes of cellular metabolism are driven by osmotic pressure, which depends on water channels. Membrane proteins such as aquaporins (AQPs) are responsible for enabling water transport through the cell membrane. AQPs are highly selective, allowing only water and relatively small polar molecules to cross the membrane. Experimentally, estimation of water flux through membrane proteins is still a challenge, and hence accurate simulations of water transport are of particular importance. We present a numerical study of water diffusion through AQP1 comparing three water models: TIP3P, OPC and TIP4P/2005. Bulk diffusion, diffusion permeability and osmotic permeability are computed and compared among all models. The results show that there are significant differences between TIP3P (a particularly widespread model for simulations of biological systems), and the more recently developed TIP4P/2005 and OPC models. We demonstrate that OPC and TIP4P/2005 reproduce protein-water interactions and dynamics in excellent agreement with experimental data. From this study, we find that the choice of the water model has a significant effect on the computed water dynamics as well as its molecular behaviour within a biological nanopore. △ Less

Submitted 20 October, 2021; v1 submitted 18 January, 2021; originally announced January 2021.

Self-adaptation of Pseudomonas fluorescens biofilms to hydrodynamic stress

Authors: Josue J. Perez, Francisco Alarcon Oseguera, Ajay K. Monnappa, Jose I. Santos, Valentino Bianco, Pin Nie, Massimo P. Ciamarra, Angeles Canales, Luis Dinis, Ivan Lopezmontero, Chantal Valeriani, Belen Orgaz

Abstract: In some conditions, bacteria self-organise into biofilms, supracellular structures made of a self-produced embedding matrix, mainly composed on polysaccharides, DNA, proteins and lipids. It is known that bacteria change their colony/matrix ratio in the presence of external stimuli such as hydrodynamic stress. However, little is still known about the molecular mechanisms driving this self-adaptatio… ▽ More In some conditions, bacteria self-organise into biofilms, supracellular structures made of a self-produced embedding matrix, mainly composed on polysaccharides, DNA, proteins and lipids. It is known that bacteria change their colony/matrix ratio in the presence of external stimuli such as hydrodynamic stress. However, little is still known about the molecular mechanisms driving this self-adaptation. In this work, we monitor structural features of Pseudomonas fluorescens biofilms grown with and without hydrodynamic stress. Our measurements show that the hydrodynamic stress concomitantly increases the cell density population and the matrix production. At short growth timescales, the matrix mediates a weak cell-cell attractive interaction due to the depletion forces originated by the polymer constituents. Using a population dynamics model, we conclude that hydrodynamic stress causes a faster diffusion of nutrients and a higher incorporation of planktonic bacteria to the already formed microcolonies. This results in the formation of more mechanically stable biofilms due to an increase of the number of crosslinks, as shown by computer simulations. The mechanical stability also lies on a change in the chemical compositions of the matrix, which becomes enriched in carbohydrates, known to display adhering properties. Overall, we demonstrate that bacteria are capable of self-adapting to hostile hydrodynamic stress by tailoring the biofilm chemical composition, thus affecting both the mesoscale structure of the matrix and its viscoelastic properties that ultimately regulate the bacteria-polymer interactions. △ Less

Submitted 7 January, 2021; originally announced January 2021.

Characterization of MIPS in a suspension of repulsive Active Brownian Particles through dynamical features

Authors: Jose Martin, Raul Martinez, Lachlan C. Alexander, Angel Luis Diez, Dirk G. A. L. Aarts, Francisco Alarcon, Jorge Ramirez, Chantal Valeriani

Abstract: The two-dimensional Active Brownian Particles system is meant to be composed of hard disks, that show excluded volume interactions, usually simulated via molecular dynamics using pure repulsive potentials. We show that the softness of the chosen potential plays a role in the result of the simulation, focusing on the case of the emergence of Motility Induced Phase Separation. In a pure hard-sphere… ▽ More The two-dimensional Active Brownian Particles system is meant to be composed of hard disks, that show excluded volume interactions, usually simulated via molecular dynamics using pure repulsive potentials. We show that the softness of the chosen potential plays a role in the result of the simulation, focusing on the case of the emergence of Motility Induced Phase Separation. In a pure hard-sphere system with no traslational diffusion,the phase diagram should be completely determined by their density and Péclet number. However, we have found two additional effects that affect the phase diagram in the ABP model we simulate: the relative strength of the traslational diffusion compared to the propulsion term and the overlap** of the particles. As we show, the second effect can be strongly mitigated if we use, instead of the standard Weeks-Chandler- Andersen potential, a harder one, the pseudo-hard spheres potential. Moreover, in determining the boundary of our phase space, we have tried different approaches to detect MIPS and concluded that observing dynamical features, via the non-Gaussian parameter, is more efficient than observing structural ones, via the local density distribution function. We also demonstrate that the Vogel-Fulcher equation successfully reproduces the decay of the diffusion as a function of density, except for very high density cases. Thus, the ABP system behaves similarly to a fragile glass in this regard. △ Less

Submitted 26 April, 2021; v1 submitted 13 December, 2020; originally announced December 2020.

Journal ref: Journal of Chemical Physics, 154, 164901 (2021)

Seeding Approach to Bubble Nucleation in Superheated Lennard Jones Fluids

Authors: Pablo Rosales-Pelaez, Marta Irene Garcia-Cid, Chantal Valeriani, Carlos Vega, Eduardo Sanz

Abstract: We investigate vapor homogeneous nucleation in a superheated Lennard Jones liquid with computer simulations. Special simulation techniques are required to address this study since the nucleation of a critical vapor bubble --one that has equal chance to grow or shrink-- in a moderately superheated liquid is a rare event. We use the Seeding method, that combines Classical Nucleation Theory with comp… ▽ More We investigate vapor homogeneous nucleation in a superheated Lennard Jones liquid with computer simulations. Special simulation techniques are required to address this study since the nucleation of a critical vapor bubble --one that has equal chance to grow or shrink-- in a moderately superheated liquid is a rare event. We use the Seeding method, that combines Classical Nucleation Theory with computer simulations of a liquid containing a vapor bubble to provide bubble nucleation rates in a wide temperature range. Seeding has been successfully applied to investigate the nucleation of crystals in supercooled fluids and here we apply it for the fist time --to the best of our knowledge-- to the liquid-to-vapor transition. We find that Seeding provides nucleation rates that are consistent with independent calculations not based on the assumptions of Classical Nucleation Theory. Different criteria to determine the radius of the critical bubble give different rate values. The accuracy of each criterion depends of the degree of superheating. Moreover, Seeding simulations show that the surface tension depends on pressure for a given temperature. Therefore, using Classical Nucleation Theory with the coexistence surface tension does not provide good estimates of the nucleation rate. △ Less

Submitted 5 March, 2020; originally announced March 2020.

Comments: paper

Journal ref: Phys. Rev. E., 100, 052609, 2019

Seeding Approach to nucleation in the NVT ensemble: the case of bubble cavitation in overstretched Lennard Jones fluids

Authors: Pablo Rosales-Pelaez, Ignacio Sanchez-Burgos, Chantal Valeriani, Carlos Vega, Eduardo Sanz

Abstract: Simulations are widely used to study nucleation in first order phase transitions due to the fact that they have access to the relevant length and time scales. However, simulations face the problem that nucleation is an activated process. Therefore, rare event simulation techniques are needed to promote the formation of the critical nucleus. The Seeding method, where the simulations are started wit… ▽ More Simulations are widely used to study nucleation in first order phase transitions due to the fact that they have access to the relevant length and time scales. However, simulations face the problem that nucleation is an activated process. Therefore, rare event simulation techniques are needed to promote the formation of the critical nucleus. The Seeding method, where the simulations are started with the nucleus already formed, has proven quite useful in efficiently providing estimates of the nucleation rate for a wide range of orders of magnitude. So far, Seeding has been employed in the NPT ensemble, where the nucleus either grows or redissolves. Thus, several trajectories have to be run in order to find the thermodynamic conditions that make the seeded nucleus critical. Moreover, the nucleus lifetime is short and the statistics for obtaining its properties is consequently poor. To deal with these shortcomings we extend the Seeding method to the NVT ensemble. We focus on the problem of bubble nucleation in a mestastable Lennard Jones fluid. We show that, in the NVT ensemble, it is possible to equilibrate and stabilise critical bubbles for a long time. The nucleation rate inferred from NVT-Seeding is fully consistent with that coming from NPT-Seeding. The former is quite suitable to obtain the nucleation rate along isotherms, whereas the latter is preferable if the dependence of the rate with temperature at constant pressure is required. Care should be taken with finite size effects when using NVT-Seeding. Further work is required to extend NVT seeding to other sorts of phase transitions. △ Less

Submitted 5 March, 2020; originally announced March 2020.

Comments: 10 pages, 9 figures

Journal ref: Phys. Rev. E, 101, 022611, 2020

Effect of dissolved salt on the anomalies of water at negative pressure

Authors: Alberto Zaragoza, Chandra Shekhar Pati Tripathi, Miguel A. Gonzalez, José Luis F. Abascal, Frédéric Caupin, Chantal Valeriani

Abstract: Adding salt to water at ambient pressure affects its thermodynamic properties. At low salt concentration, anomalies such as the density maximum are shifted to lower temperature, while at large enough salt concentration they cannot be observed any more. Here we investigate the effect of salt on an anomaly recently observed in pure water at negative pressure: the existence of a sound velocity minimu… ▽ More Adding salt to water at ambient pressure affects its thermodynamic properties. At low salt concentration, anomalies such as the density maximum are shifted to lower temperature, while at large enough salt concentration they cannot be observed any more. Here we investigate the effect of salt on an anomaly recently observed in pure water at negative pressure: the existence of a sound velocity minimum along isochores. We compare experiments and simulations for an aqueous solution of sodium chloride with molality around $1.2\,\mathrm{mol\,kg^{-1}}$, reaching pressures beyond $-100\,\mathrm{MPa}$. We also discuss the origin of the minima in the sound velocity and emphasize the importance of the relative position of the temperatures of sound velocity and density anomalies. △ Less

Submitted 20 April, 2020; v1 submitted 29 January, 2020; originally announced January 2020.

Comments: 10 pages, 13 figures, 1 appendix. Added minor simulation details

Journal ref: J. Chem. Phys. 152, 194501 (2020)

Molecular dynamics study of nanoconfined TIP4P/2005 water: how confinement and temperature affect diffusion and viscosity

Authors: A Zaragoza, MA Gonzalez, L Joly, I Lopez-Montero, MA Canales, AL Benavides, C Valeriani

Abstract: In the last decades a large effort has been devoted to the study of water confined in hydrophobic geometries at the nanoscale (tubes, slit pores), because of the multiple technological applications of such systems, ranging from drugs delivery to water desalinization devices. To our knowledge, neither numerical/theoretical nor experimental approaches have so far reached a consensual understanding o… ▽ More In the last decades a large effort has been devoted to the study of water confined in hydrophobic geometries at the nanoscale (tubes, slit pores), because of the multiple technological applications of such systems, ranging from drugs delivery to water desalinization devices. To our knowledge, neither numerical/theoretical nor experimental approaches have so far reached a consensual understanding of structural and transport properties of water under these conditions. In this work, we present molecular dynamics simulations of TIP4P/2005 water under different hydrophobic nano-confinements (slit pores or nanotubes, with two degrees of hydrophobicity) within a wide temperature range. On the one side, water is more structured near the hydrophobic walls, independently on the confining geometries. On the other side, we show that the combined effect of confinement and curvature leads to an enhanced diffusion coefficient of water in hydrophobic nanotubes. Finally, we propose a confined Stokes-Einstein relation to extract viscosity from diffusivity, whose result strongly differs from the Green-Kubo expression that has been used in previous work. We discuss the shortcomings of both approaches, which could explain this discrepancy. △ Less

Submitted 20 December, 2019; originally announced December 2019.

Journal ref: Phys. Chem. Chem. Phys., 2019,21, 13653-13667

Collective motion of run-and-tumble particles drives aggregation in one-dimensional systems

Authors: C. Miguel Barriuso Gutierrez, Christian Vanhille Campos, Francisco Alarcon Oseguera, Ignacio Pagonabarraga, Ricardo Brito, Chantal Valeriani

Abstract: Active matter deals with systems whose particles consume energy at the individual level in order to move. To unravel features such as the emergence of collective structures several models have been suggested, such as the on-lattice model of run-and-tumble particles implemented via the Persistent Exclusion Process (PEP). In our work, we study a one dimensional system of run-and-tumble repulsive or… ▽ More Active matter deals with systems whose particles consume energy at the individual level in order to move. To unravel features such as the emergence of collective structures several models have been suggested, such as the on-lattice model of run-and-tumble particles implemented via the Persistent Exclusion Process (PEP). In our work, we study a one dimensional system of run-and-tumble repulsive or attractive particles, both on and off lattice. Additionally, we implement a cluster motility dynamics in the on-lattice case (since in the off-lattice case cluster motility arises from the individual particle dynamics). While we observe important differences between discrete and continuous dynamics, few common features are of particular importance. Increasing particle density drives aggregation across all different systems explored. For non-attractive particles, the effects of particle activity on aggregation are largely independent of the details of the dynamics. On the contrary, once attractive interactions are introduced, the steady state, which is completely determined by the interplay between these and the particles' activity, becomes highly dependent on the details of the dynamics. △ Less

Submitted 14 October, 2021; v1 submitted 3 December, 2019; originally announced December 2019.

Trap** flocking particles with asymmetric obstacles

Authors: Raul Martinez, Francisco Alarcon, Juan Luis Aragones, Chantal Valeriani

Abstract: Asymmetric obstacles can be exploited to direct the motion and induce sorting of run-and-tumbling particles. In this work, we show that flocking particles which follow the Vicsek model aligning rules experience a collective trap** in the presence of a wall of funnels made of chevrons, concentrating at the opposite side of a wall of funnels than run-and-tumbling particles. Flocking particles can… ▽ More Asymmetric obstacles can be exploited to direct the motion and induce sorting of run-and-tumbling particles. In this work, we show that flocking particles which follow the Vicsek model aligning rules experience a collective trap** in the presence of a wall of funnels made of chevrons, concentrating at the opposite side of a wall of funnels than run-and-tumbling particles. Flocking particles can be completely trapped or exhibit a dynamical trap** behaviour; these two regimes open the door to the design of a system with two perpendicular flows of active particles. This systematic study broaden our understanding about the emergence of collective motion of microorganisms in confined environments and direct the design of new microfluidics devices able to controlthese collective behaviours. △ Less

Submitted 29 November, 2019; originally announced November 2019.

Collective behavior of Vicsek particles without and with obstacles

Authors: Raul Martinez, Francisco Alarcon, Diego Rogel Rodriguez, Juan Luis Aragones, Chantal Valeriani

Abstract: In our work we have studied a two-dimensional suspension of finite-size Vicsek hard-disks, whose time evolution follows an event-driven dynamics between subsequent time steps. Having compared its collective behaviour with the one expected for a system of scalar Vicsek point-like particles, we have analysed the effect of considering two possible bouncing rules between the disks: a Vicsek-like rule… ▽ More In our work we have studied a two-dimensional suspension of finite-size Vicsek hard-disks, whose time evolution follows an event-driven dynamics between subsequent time steps. Having compared its collective behaviour with the one expected for a system of scalar Vicsek point-like particles, we have analysed the effect of considering two possible bouncing rules between the disks: a Vicsek-like rule and a pseudo-elastic one, focusing on the order-disorder transition. Next, we have added to the two-dimensional suspension of hard-disk Vicsek particles disk-like passive obstacles of two types: either fixed in space or moving according to the same event-driven dynamics. We have performed a detailed analysis of the particles' collective behaviour observed for both fixed and moving obstacles. In the fixed obstacles case, we have observed formation of clusters at low noise, in agreement with previous studies. When using moving passive obstacles, we found that that order of active particles is better destroyed as the drag of obstacles increases. In the no drag limit an interesting result was found: introduction of low drag passive particles can lead in some cases to a more ordered state of active flocking particles than what they show in bulk. △ Less

Submitted 23 November, 2019; originally announced November 2019.

Orientational order and morphology of clusters of self-assembled Janus swimmers

Authors: Francisco Alarcon, Eloy Navarro-Argemí, Chantal Valeriani, Ignacio Pagonabarraga

Abstract: Due to the combined effect of anisotropic interactions and activity, Janus swimmers are capable to self-assemble in a wide variety of structures, many more than their equilibrium counterpart. This might lead to the development of novel active materials capable of performing tasks without any central control. Their potential application in designing such materials endows trying to understand the fu… ▽ More Due to the combined effect of anisotropic interactions and activity, Janus swimmers are capable to self-assemble in a wide variety of structures, many more than their equilibrium counterpart. This might lead to the development of novel active materials capable of performing tasks without any central control. Their potential application in designing such materials endows trying to understand the fundamental mechanism in which these swimmers self-assemble. In the present work, we study a quasi-two dimensional semi-dilute suspensions of two classes of amphiphilic spherical swimmers whose direction of motion can be tuned: either swimmers propelling in the direction of the hydrophobic patch (WP), or swimmers propelling in the opposite direction (towards the hydrophilic side) (AP). In both systems we have systematically tuned swimmers' hydrophobic strength and signature, and observed that the anisotropic interactions, characterized by the angular attractive potential and its interaction range, in competition with the active stress, pointing towards or against the attractive patch gives rise to a rich aggregation phenomenology. △ Less

Submitted 21 May, 2019; originally announced May 2019.

Comments: Submitted in Physical Review E

Viscosity and self-diffusion of supercooled and stretched water from molecular dynamics simulations

Authors: Pablo Montero de Hijes, Eduardo Sanz, Laurent Joly, Chantal Valeriani, Frédéric Caupin

Abstract: Among the numerous anomalies of water, the acceleration of dynamics under pressure is particularly puzzling. Whereas the diffusivity anomaly observed in experiments has been reproduced in several computer studies, the parallel viscosity anomaly has received less attention. Here we simulate viscosity and self-diffusion coefficient of the TIP4P/2005 water model over a broad temperature and pressure… ▽ More Among the numerous anomalies of water, the acceleration of dynamics under pressure is particularly puzzling. Whereas the diffusivity anomaly observed in experiments has been reproduced in several computer studies, the parallel viscosity anomaly has received less attention. Here we simulate viscosity and self-diffusion coefficient of the TIP4P/2005 water model over a broad temperature and pressure range. We reproduce the experimental behavior, and find additional anomalies at negative pressure. The anomalous effect of pressure on dynamic properties becomes more pronounced upon cooling, reaching two orders of magnitude for viscosity at 220 K. We analyze our results with a dynamic extension of a thermodynamic two-state model, an approach which has proved successful in describing experimental data. Water is regarded as a mixture of interconverting species with contrasting dynamic behaviors, one being strong (Arrhenius), and the other fragile (non-Arrhenius). The dynamic parameters of the two-state models are remarkably close between experiment and simulations. The larger pressure range accessible to simulations suggests a modification of the dynamic two-state model, which in turn also improves the agreement with experimental data. Furthermore, our simulations demonstrate the decoupling between viscosity $η$ and self-diffusion coefficient $D$ as a function of temperature $T$. The Stokes-Einstein relation, which predicts a constant $D η/T$, is violated when $T$ is lowered, in connection with the Widom line defined by an equal fraction of the two interconverting species. These results provide a unifying picture of thermodynamics and dynamics in water, and call for experiments at negative pressure. △ Less

Submitted 27 July, 2018; v1 submitted 30 May, 2018; originally announced May 2018.

Comments: 13 pages, 11 figures, 4 tables; results for one simulated state point replaced by results from a longer simulation, corresponding minor changes made to figures and tables, minor clarifications

Journal ref: The Journal of Chemical Physics 149, 094503 (2018)

Phase boundaries, nucleation rates and speed of crystal growth of the water-to-ice transition under an electric field: a simulation study

Authors: Alberto Zaragoza, Jorge R Espinosa, Regina Ramos, José Antonio Cobos, Juan Luis Aragones, Carlos Vega, Eduardo Sanz, Jorge Ramírez, Chantal Valeriani

Abstract: We investigate with computer simulations the effect of applying an electric field on the water-to-ice transition. We use a combination of state-of-the-art simulation techniques to obtain phase boundaries and crystal growth rates (direct coexistence), nucleation rates (seeding) and interfacial free energies (seeding and mold integration). First, we consider ice Ih, the most stable polymorph in the… ▽ More We investigate with computer simulations the effect of applying an electric field on the water-to-ice transition. We use a combination of state-of-the-art simulation techniques to obtain phase boundaries and crystal growth rates (direct coexistence), nucleation rates (seeding) and interfacial free energies (seeding and mold integration). First, we consider ice Ih, the most stable polymorph in the absence of a field. Its normal melting temperature, speed of crystal growth and nucleation rate (for a given supercooling) diminish as the intensity of the field goes up. Then, we study polarised cubic ice, or ice Icf, the most stable solid phase under a strong electric field. Its normal melting point goes up with the field and, for a given supercooling, under the studied field (0.3 V/nm) ice Icf nucleates and grows at a similar rate as Ih with no field. The net effect of the field would be then that ice nucleates at warmer temperatures, but in the form of ice Icf. The main conclusion of this work is that reasonable electric fields (not strong enough to break water molecules apart) are not relevant in the context of homogeneous ice nucleation at 1 bar. △ Less

Submitted 5 April, 2018; originally announced April 2018.

Journal ref: J. Phys. Condens. Matter 30 174002 (2018)

A simulation study of homogeneous ice nucleation in supercooled salty water

Authors: Guiomar D. Soria, Jorge R. Espinosa, Jorge Ramirez, Chantal Valeriani, Carlos Vega, Eduardo Sanz

Abstract: We use computer simulations to investigate the effect of salt on homogeneous ice nucleation. The melting point of the employed solution model was obtained both by direct coexistence simulations and by thermodynamic integration from previous calculations of the water chemical potential. Using a Seeding approach, in which we simulate ice seeds embedded in a supercooled aqueous solution, we compute… ▽ More We use computer simulations to investigate the effect of salt on homogeneous ice nucleation. The melting point of the employed solution model was obtained both by direct coexistence simulations and by thermodynamic integration from previous calculations of the water chemical potential. Using a Seeding approach, in which we simulate ice seeds embedded in a supercooled aqueous solution, we compute the nucleation rate as a function of temperature for a 1.85 NaCl mole per water kilogram solution at 1 bar. To improve the accuracy and reliability of our calculations we combine Seeding with the direct computation of the ice-solution interfacial free energy at coexistence using the Mold Integration method. We compare the results with previous simulation work on pure water to understand the effect caused by the solute. The model captures the experimental trend that the nucleation rate at a given supercooling decreases when adding salt. Despite the fact that the thermodynamic driving force for ice nucleation is higher for salty water for a given supercooling, the nucleation rate slows down with salt due to a significant increase of the ice-fluid interfacial free energy. The salty water model predicts an ice nucleation rate that is in good agreement with experimental measurements, bringing confidence in the predictive ability of the model. △ Less

Submitted 10 October, 2017; v1 submitted 2 September, 2017; originally announced September 2017.

Morphology of clusters of attractive dry and wet self-propelled spherical particle suspensions

Authors: Francisco Alarcón, Chantal Valeriani, Ignacio Pagonabarraga

Abstract: In order to asses the effect of hydrodynamics in the assembly of active attractive spheres, we simulate a semi-dilute suspension of attractive self-propelled spherical particles in a quasi two dimensional geometry comparing the case with and without hydrodynamics interactions. To start with, independently on the presence of hydrodynamics, we observe that depending on the ratio between attraction a… ▽ More In order to asses the effect of hydrodynamics in the assembly of active attractive spheres, we simulate a semi-dilute suspension of attractive self-propelled spherical particles in a quasi two dimensional geometry comparing the case with and without hydrodynamics interactions. To start with, independently on the presence of hydrodynamics, we observe that depending on the ratio between attraction and propulsion, particles either coarsen or aggregate forming finite-size clusters. Focusing on the clustering regime, we characterize two different clusters parameters, i.e. their morphology and orientational order, and compare the case when active particles behave either as pushers or pullers (always in the regime where inter-particles attractions competes with self-propulsion). Studying cluster phases for squirmers with respect to those obtained for active Brownian disks (indicated as ABP), we have shown that hydrodynamics alone can sustain a cluster phase of active swimmers (pullers), while ABP form cluster phases due to the competition between attraction and self propulsion. The structural properties of the cluster phases of squirmers and ABP are similar, although squirmers show sensitivity to active stresses. Active Brownian disks resemble weakly pusher squirmer suspensions in terms of cluster size distribution, structure of the radius of gyration on cluster size and degree of cluster polarity. △ Less

Submitted 14 December, 2016; v1 submitted 12 December, 2016; originally announced December 2016.

Comments: Accepted in Soft Matter Journal

Journal ref: Soft Matter, 2016

Two-structure thermodynamics for the TIP4P/2005 model of water covering supercooled and deeply stretched regions

Authors: John W. Biddle, Rakesh S. Singh, Evan M. Sparano, Francesco Ricci, Miguel A. González, Chantal Valeriani, José L. F. Abascal, Pablo G. Debenedetti, Mikhail A. Anisimov, Frédéric Caupin

Abstract: One of the most promising frameworks for understanding the anomalies of cold and supercooled water postulates the existence of two competing, interconvertible local structures. If the non-ideality in the Gibbs energy of mixing overcomes the ideal entropy of mixing of these two structures, a liquid-liquid phase transition, terminated at a liquid-liquid critical point, is predicted. Various versions… ▽ More One of the most promising frameworks for understanding the anomalies of cold and supercooled water postulates the existence of two competing, interconvertible local structures. If the non-ideality in the Gibbs energy of mixing overcomes the ideal entropy of mixing of these two structures, a liquid-liquid phase transition, terminated at a liquid-liquid critical point, is predicted. Various versions of the "two-structure equation of state" (TSEOS) based on this concept have shown remarkable agreement with both experimental data for metastable, deeply supercooled water and simulations of molecular water models. However, existing TSEOSs were not designed to describe the negative pressure region and do not account for the stability limit of the liquid state with respect to the vapor. While experimental data on supercooled water at negative pressures may shed additional light on the source of the anomalies of water, such data are very limited. To fill this gap, we have analyzed simulation results for TIP4P/2005, one of the most accurate classical water models available. We have used recently published simulation data, and performed additional simulations, over a broad range of positive and negative pressures, from ambient temperature to deeply supercooled conditions. We show that, by explicitly incorporating the liquid-vapor spinodal into a TSEOS, we are able to match the simulation data for TIP4P/2005 with remarkable accuracy. In particular, this equation of state quantitatively reproduces the lines of extrema in density, isothermal compressibility, and isobaric heat capacity. Contrary to an explanation of the thermodynamic anomalies of water based on a "retracing spinodal", the liquid-vapor spinodal in the present TSEOS continues monotonically to lower pressures upon cooling, influencing but not giving rise to density extrema and other thermodynamic anomalies. △ Less

Submitted 22 December, 2017; v1 submitted 1 November, 2016; originally announced November 2016.

Comments: 11 pages, 9 figures. Supplementary Materials (2 pages, 2 figures) in anc subdirectory. Changes from previous version: Corrected misprint of values of S1 and S2 in Table I. Results unchanged. Supersedes arXiv:1605.05993

Journal ref: Journal of Chemical Physics, 146 (2017) 034502

Molecular mechanism for cavitation in water under tension

Authors: Georg Menzl, Miguel A. Gonzalez, Philipp Geiger, Frédéric Caupin, Jose L. F. Abascal, Chantal Valeriani, Christoph Dellago

Abstract: Despite its relevance in biology and engineering, the molecular mechanism driving cavitation in water remains unknown. Using computer simulations, we investigate the structure and dynamics of vapor bubbles emerging from metastable water at negative pressures. We find that in the early stages of cavitation, bubbles are irregularly shaped and become more spherical as they grow. Nevertheless, the fre… ▽ More Despite its relevance in biology and engineering, the molecular mechanism driving cavitation in water remains unknown. Using computer simulations, we investigate the structure and dynamics of vapor bubbles emerging from metastable water at negative pressures. We find that in the early stages of cavitation, bubbles are irregularly shaped and become more spherical as they grow. Nevertheless, the free energy of bubble formation can be perfectly reproduced in the framework of classical nucleation theory (CNT) if the curvature dependence of the surface tension is taken into account. Comparison of the observed bubble dynamics to the predictions of the macroscopic Rayleigh--Plesset (RP) equation, augmented with thermal fluctuations, demonstrates that the growth of nanoscale bubbles is governed by viscous forces. Combining the dynamical prefactor determined from the RP equation with the free energy of CNT yields an analytical expression for the cavitation rate that reproduces the simulation results very well over a wide range of pressures. Furthermore, our theoretical predictions are in excellent agreement with cavitation rates obtained from inclusion experiments. This suggests that homogeneous nucleation is observed in inclusions, whereas only heterogeneous nucleation on impurities or defects occurs in other experiments. △ Less

Submitted 5 December, 2016; v1 submitted 10 June, 2016; originally announced June 2016.

Comments: Commentary by D. Lohse and A. Prosperetti: Proc. Natl. Acad. Sci. USA, 113(48), 13549-13550 (2016), doi:10.1073/pnas.1616271113

Journal ref: Proc. Natl. Acad. Sci. USA, 113(48), 13582-13587 (2016)

An Equation of State For The TIP4P/2005 Model of Water Including Negative Pressures

Authors: John W. Biddle, Rakesh S. Singh, Miguel A. González, Chantal Valeriani, José L. F. Abascal, Pablo G. Debenedetti, Mikhail A. Anisimov, Frédéric Caupin

Abstract: One of the most promising frameworks for understanding the anomalies of cold and especially supercooled water is that of two-structure thermodynamics, in which water is viewed as a non-ideal mixture of two interconvertible local structures. The non-ideality of this mixture may give rise, at very low temperatures, to a liquid-liquid phase transition (LLPT) and a liquid-liquid critical point (LLCP),… ▽ More One of the most promising frameworks for understanding the anomalies of cold and especially supercooled water is that of two-structure thermodynamics, in which water is viewed as a non-ideal mixture of two interconvertible local structures. The non-ideality of this mixture may give rise, at very low temperatures, to a liquid-liquid phase transition (LLPT) and a liquid-liquid critical point (LLCP), at which thermodynamic response functions diverge. Various versions of the "two-structure equation of state" (TSEOS) based on this concept have shown remarkable agreement with both experimental data in real water and simulation results. However, recent experiments probing supercooled water at negative pressures reveal the inadequacy of extrapolations of equations of state developed for positive pressures, and have begun to shed additional light on the source of the anomalies of supercooled water. We have analyzed simulation results for the TIP4P/2005 model over a broad range of positive and negative pressures from ambient temperature to deep supercooling. We find that by explicitly incorporating a liquid-vapor spinodal into a two-structure equation of state, we are able to match the simulation data in TIP4P/2005 with striking accuracy. In particular, our equation of state reproduces the observed lines of minima and maxima in the density, isothermal compressibility, and isobaric heat capacity. Contrary to scenarios in which a retracing spinodal accounts for the thermodynamic anomalies of water, we find that the liquid-vapor spinodal in this model continues monotonically to lower pressures as temperature is decreased, influencing but not giving rise to the locus of density maxima and other thermodynamic anomalies. We explain the behavior of TIP4P/2005 in terms of two phenomena: the competition between two local structures and a monotonic liquid-vapor spinodal. △ Less

Submitted 11 November, 2016; v1 submitted 19 May, 2016; originally announced May 2016.

Comments: 18 pages, 8 figures. This paper has been withdrawn by the authors because it is superseded by arXiv:1611.00443

A comprehensive scenario of the thermodynamic anomalies of water using the TIP4P/2005 model

Authors: Miguel A. Gonzalez, Chantal Valeriani, Frederic Caupin, Jose L. F. Abascal

Abstract: The striking behavior of water has deserved it to be referred to as an "anomalous" liquid. The water anomalies are greatly amplified in metastable (supercooled/stretched) regions. This makes difficult a complete experimental description since, beyond certain limits, the metastable phase necessarily transforms into the stable one. Theoretical interpretation of the water anomalies could then be base… ▽ More The striking behavior of water has deserved it to be referred to as an "anomalous" liquid. The water anomalies are greatly amplified in metastable (supercooled/stretched) regions. This makes difficult a complete experimental description since, beyond certain limits, the metastable phase necessarily transforms into the stable one. Theoretical interpretation of the water anomalies could then be based on simulation results of well validated water models. But the analysis of the simulations has not yet reached a consensus. In particular, one of the most popular theoretical scenarios -involving the existence of a liquid-liquid critical point (LLCP)- is disputed by several authors. In this work we propose to use a number of exact thermodynamic relations which can be tested in a region of the phase diagram outside the LLCP thus avoiding the problems associated to the coexistence region. The central property connected to other water anomalies is the locus of temperatures at which the density along isobars attain a maximum (TMD line) or a minimum (TmD), computed via simulations for a successful water model, TIP4P/2005. Next, we have evaluated the vapor-liquid spinodal in the region of large negative pressures. The shape of these curves and their connection to the extrema of response functions (isothermal compressibility and heat capacity at constant pressure) may help to elucidate the validity of the theoretical proposals. In this way we are able to present for the first time a comprehensive scenario of the thermodynamic water anomalies for TIP4P/2005 and their relation to the vapor-liquid spinodal. The overall picture shows a remarkable similarity with the corresponding one for the ST2 water model, for which the existence of a LLCP has been demonstrated in recent years. It also provides a hint as to where the long-sought for extrema in response functions might become accessible to experiments. △ Less

Submitted 1 August, 2016; v1 submitted 17 May, 2016; originally announced May 2016.

Journal ref: The Journal of Chemical Physics, tentative reference: vol 145 issue 6 number 025630 (2016)

Microphase separation in two dimensional suspensions of self-propelled spheres and dumbbells

Authors: Clarion Tung, Joseph Harder, Chantal Valeriani, Angelo Cacciuto

Abstract: We use numerical simulations to study the phase behavior of self-propelled spherical and dumbbellar particles interacting via micro-phase separation inducing potentials. Our results indicate that under the appropriate conditions, it is possible to drive the formation of two new active states; a spinning cluster crystal, i.e. an ordered mesoscopic phase having finite size spinning crystallites as l… ▽ More We use numerical simulations to study the phase behavior of self-propelled spherical and dumbbellar particles interacting via micro-phase separation inducing potentials. Our results indicate that under the appropriate conditions, it is possible to drive the formation of two new active states; a spinning cluster crystal, i.e. an ordered mesoscopic phase having finite size spinning crystallites as lattice sites, and a fluid of living clusters, i.e. a two dimensional fluid where each "particle" is a finite size living cluster. We discuss the dynamics of these phases and suggest ways of extending their stability under a wide range of active forces. △ Less

Submitted 12 October, 2015; originally announced October 2015.

Anomalous dynamics of an elastic membrane in an active fluid

Authors: S. A. Mallory, C. Valeriani, A. Cacciuto

Abstract: Using numerical simulations, we characterized the behavior of an elastic membrane immersed in an active fluid. Our findings reveal a nontrivial folding and re-expansion of the membrane that is controlled by the interplay of its resistance to bending and the self-propulsion strength of the active components in solution. We show how flexible membranes tend to collapse into multi-folded states, where… ▽ More Using numerical simulations, we characterized the behavior of an elastic membrane immersed in an active fluid. Our findings reveal a nontrivial folding and re-expansion of the membrane that is controlled by the interplay of its resistance to bending and the self-propulsion strength of the active components in solution. We show how flexible membranes tend to collapse into multi-folded states, whereas stiff membranes oscillates between an extended configuration and a singly folded state. This study provides a simple example of how to exploit the random motion of active particles to perform mechanical work at the micro-scale. △ Less

Submitted 6 May, 2015; originally announced May 2015.

Journal ref: Phys. Rev. E 92, 012314 (2015)

Homogeneous ice nucleation evaluated for several water models

Authors: J. R. Espinosa, E. Sanz, C. Valeriani, C. Vega

Abstract: In this work, we evaluate by means of computer simulations the rate for ice homogeneous nucleation for several water models such as TIP4P, TIP4P/2005,TIP4P/ICE, and mW (following the same procedure as in Sanz et al. [J. Am. Chem. Soc.135, 15008 (2013)]) in a broad temperature range. We estimate the ice-liquid interfacial free-energy, and conclude that for all water models γ decreases as the temper… ▽ More In this work, we evaluate by means of computer simulations the rate for ice homogeneous nucleation for several water models such as TIP4P, TIP4P/2005,TIP4P/ICE, and mW (following the same procedure as in Sanz et al. [J. Am. Chem. Soc.135, 15008 (2013)]) in a broad temperature range. We estimate the ice-liquid interfacial free-energy, and conclude that for all water models γ decreases as the temperature decreases. Extrapolating our results to the melting temperature, we obtain a value of the interfacial free-energy between 25 and 32 mN/m in reasonable agreement with the reported experimental values. Moreover, we observe that the values of γ depend on the chosen water model and this is a key factor when numerically evaluating nucleation rates, given that the kinetic prefactor is quite similar for all water models with the exception of the mW (due to the absence of hydrogens). Somewhat surprisingly the estimates of the nucleation rates found in this work for TIP4P/2005 are slightly higher than those of the mW model, even though the former has explicit hydrogens. Our results suggest that it may be possible to observe in computer simulations spontaneous crystallization of TIP4P/2005 at about 60 K below the melting point. △ Less

Submitted 25 November, 2014; originally announced November 2014.

Journal ref: J. Chem. Phys. 141, 18C529 (2014)

Activity induced collapse and re-expansion of rigid polymers

Authors: Joseph Harder, Chantal Valeriani, Angelo Cacciuto

Abstract: We study the elastic properties of a rigid filament in a bath of self-propelled particles. We find that while fully flexible filaments swell monotonically upon increasing the strength of the propelling force, rigid filaments soften for moderate activities, collapse into metastable hairpins for intermediate strengths, and eventually re-expand when the strength of the activity of the surrounding flu… ▽ More We study the elastic properties of a rigid filament in a bath of self-propelled particles. We find that while fully flexible filaments swell monotonically upon increasing the strength of the propelling force, rigid filaments soften for moderate activities, collapse into metastable hairpins for intermediate strengths, and eventually re-expand when the strength of the activity of the surrounding fluid is large. This collapse and re-expansion of the filament with the bath activity is reminiscent of the behavior observed in polyelectrolytes in the presence of different concentrations of multivalent salt. △ Less

Submitted 17 November, 2014; originally announced November 2014.

Comments: 10 pages, 4 figures

The role of particle shape in active depletion

Authors: J. Harder, S. A. Mallory, C. Tung, C. Valeriani, A. Cacciuto

Abstract: Using numerical simulations, we study how a solution of small active disks, acting as depletants, induces effective interactions on large passive colloids. Specifically, we analyze how the range, strength, and sign of these interactions are crucially dependent on the shape of the colloids. Our findings indicate that while colloidal rods experience a long-ranged predominantly attractive interaction… ▽ More Using numerical simulations, we study how a solution of small active disks, acting as depletants, induces effective interactions on large passive colloids. Specifically, we analyze how the range, strength, and sign of these interactions are crucially dependent on the shape of the colloids. Our findings indicate that while colloidal rods experience a long-ranged predominantly attractive interaction, colloidal disks feel a purely repulsive force that is short-ranged in nature and grows in strength with the size ratio between the colloids and active depletants. For colloidal rods, simple scaling arguments are proposed to characterize the strength of these induced interactions. △ Less

Submitted 18 November, 2014; v1 submitted 24 July, 2014; originally announced July 2014.

Curvature Induced Activation of a Passive Tracer in an Active Bath

Authors: S. A. Mallory, C. Valeriani, A. Cacciuto

Abstract: We use numerical simulations to study the motion of a large asymmetric tracer immersed in a low density suspension of self-propelled nanoparticles in two dimensions. Specifically, we analyze how the curvature of the tracer affects its translational and rotational motion in an active environment. We find that even very small amounts of curvature are sufficient for the active bath to impart directed… ▽ More We use numerical simulations to study the motion of a large asymmetric tracer immersed in a low density suspension of self-propelled nanoparticles in two dimensions. Specifically, we analyze how the curvature of the tracer affects its translational and rotational motion in an active environment. We find that even very small amounts of curvature are sufficient for the active bath to impart directed motion to the tracer which results in its effective activation. We propose simple scaling arguments to characterize this induced activity in terms of the curvature of the tracer and the strength of the self-propelling force. Our results suggest new ways of controlling the transport properties of passive tracers in an active medium by carefully tailoring their geometry. △ Less

Submitted 25 September, 2014; v1 submitted 12 July, 2014; originally announced July 2014.

Journal ref: Physical Review E 90, 032309 (2014)

Avalanches mediate crystallization in a hard-sphere glass

Authors: Eduardo Sanz, Chantal Valeriani, Emanuela Zaccarelli, Wilson C K Poon, Michael E Cates, Peter N Pusey

Abstract: By molecular-dynamics simulations, we have studied the devitrification (or crystallization) of aged hard-sphere glasses. First, we find that the dynamics of the particles are intermittent: Quiescent periods, when the particles simply "rattle" in their nearest-neighbor cages, are interrupted by abrupt "avalanches," where a subset of particles undergo large rearrangements. Second, we find that cryst… ▽ More By molecular-dynamics simulations, we have studied the devitrification (or crystallization) of aged hard-sphere glasses. First, we find that the dynamics of the particles are intermittent: Quiescent periods, when the particles simply "rattle" in their nearest-neighbor cages, are interrupted by abrupt "avalanches," where a subset of particles undergo large rearrangements. Second, we find that crystallization is associated with these avalanches but that the connection is not straightforward. The amount of crystal in the system increases during an avalanche, but most of the particles that become crystalline are different from those involved in the avalanche. Third, the occurrence of the avalanches is a largely stochastic process. Randomizing the velocities of the particles at any time during the simulation leads to a different subsequent series of avalanches. The spatial distribution of avalanching particles appears random, although correlations are found among avalanche initiation events. By contrast, we find that crystallization tends to take place in regions that already show incipient local order. △ Less

Submitted 2 April, 2014; originally announced April 2014.

Journal ref: Proceedings of the National Academy of Sciences, 12/2013

Homogeneous ice nucleation at moderate supercooling from molecular simulation

Authors: E. Sanz, C. Vega, J. R. Espinosa, R. Caballero-Bernal, J. L. F. Abascal, C. Valeriani

Abstract: Among all the freezing transitions, that of water into ice is probably the most relevant to biology, physics, geology or atmospheric science. In this work we investigate homogeneous ice nucleation by means of computer simulations. We evaluate the size of the critical cluster and the nucleation rate for temperatures ranging between 15K and 35K below melting. We use the TIP4P/2005 and the TIP4P/Ice… ▽ More Among all the freezing transitions, that of water into ice is probably the most relevant to biology, physics, geology or atmospheric science. In this work we investigate homogeneous ice nucleation by means of computer simulations. We evaluate the size of the critical cluster and the nucleation rate for temperatures ranging between 15K and 35K below melting. We use the TIP4P/2005 and the TIP4P/Ice water models. Both give similar results when compared at the same temperature difference with the model's melting temperature. The size of the critical cluster varies from $\sim$8000 molecules (radius$ = 4$nm) at 15K below melting to $\sim$600 molecules (radius$ = 1.7$nm) at 35K below melting. We use Classical Nucleation Theory (CNT) to estimate the ice-water interfacial free energy and the nucleation free energy barrier. We obtain an interfacial free energy of 29(3)mN/m from an extrapolation of our results to the melting temperature. This value is in good agreement both with experimental measurements and with previous estimates from computer simulations of TIP4P-like models. Moreover, we obtain estimates of the nucleation rate from simulations of the critical cluster at the barrier top. The values we get for both models agree within statistical error with experimental measurements. At temperatures higher than 20K below melting we get nucleation rates slower than the appearance of a critical cluster in all the water of the hydrosphere in the age of the universe. Therefore, our simulations predict that water freezing above this temperature must necessarily be heterogeneous. △ Less

Submitted 3 December, 2013; originally announced December 2013.

Journal ref: JACS, vol. 135 , p. 15008, (2013)

Living clusters and crystals from low density suspensions of active colloids

Authors: B. M. Mognetti, A. Šarić, S. Angioletti-Uberti, A. Cacciuto, C. Valeriani, D. Frenkel

Abstract: Recent studies aimed at investigating artificial analogs of bacterial colonies have shown that low-density suspensions of self-propelled particles confined in two dimensions can assemble into finite aggregates that merge and split, but have a typical size that remains constant (living clusters). In this Letter we address the problem of the formation of living clusters and crystals of active partic… ▽ More Recent studies aimed at investigating artificial analogs of bacterial colonies have shown that low-density suspensions of self-propelled particles confined in two dimensions can assemble into finite aggregates that merge and split, but have a typical size that remains constant (living clusters). In this Letter we address the problem of the formation of living clusters and crystals of active particles in three dimensions. We study two systems: self-propelled particles interacting via a generic attractive potential and colloids that can move towards each other as a result of active agents (e.g. by molecular motors). In both cases fluid-like `living' clusters form. We explain this general feature in terms of the balance between active forces and regression to thermodynamic equilibrium. This balance can be quantified in terms of a dimensionless number that allows us to collapse the observed clustering behaviour onto a universal curve. We also discuss how active motion affects the kinetics of crystal formation. △ Less

Submitted 13 February, 2014; v1 submitted 19 November, 2013; originally announced November 2013.

Comments: the first two authors contributed equally; published version

Journal ref: Phys. Rev. Lett. 111, 245702 (2013)

Anomalies in bulk supercooled water at negative pressure

Authors: Gaël Pallares, Mouna El Mekki Azouzi, Miguel Angel Gonzalez, Juan Luis Aragones, Jose Luis F. Abascal, Chantal Valeriani, Frédéric Caupin

Abstract: Water is the most familiar liquid, and arguably the most complex. Anomalies of supercooled water have been measured during decades, and competing interpretations proposed. Yet, a decisive experiment remains elusive, because of unavoidable crystallization into ice. We investigate the state of water that is both supercooled and under mechanical tension, or negative pressure. Liquids under negative p… ▽ More Water is the most familiar liquid, and arguably the most complex. Anomalies of supercooled water have been measured during decades, and competing interpretations proposed. Yet, a decisive experiment remains elusive, because of unavoidable crystallization into ice. We investigate the state of water that is both supercooled and under mechanical tension, or negative pressure. Liquids under negative pressure can be found in plants or fluid inclusions in minerals. Using such water inclusions in quartz, we report the first measurements on doubly metastable water down to $-15^\circ\mathrm{C}$ and around $-100\,\mathrm{MPa}$. We observe sound velocity anomalies that can be reproduced quantitatively with molecular dynamics simulations. These results rule out one proposed scenario for water anomalies, and put further constraints on the remaining ones. △ Less

Submitted 27 November, 2013; v1 submitted 7 November, 2013; originally announced November 2013.

Comments: 6 pages, 4 figures + Supplementary Materials in anc subdirectory (10 pages, 7 figures, 3 tables)

Journal ref: Proc. Natl. Acad. Sci. USA 111 (2014) 7936-7941