-
Anisotropic Rheology and Friction of Suspended Graphene
Authors:
Andrea Mescola,
Andrea Silva,
Ali Khosravi,
Andrea Vanossi,
Erio Tosatti,
Sergio Valeri,
Guido Paolicelli
Abstract:
Graphene is a powerful membrane prototype for both applications and fundamental research. Rheological phenomena including indentation, twisting, and wrinkling in deposited and suspended graphene are actively investigated to unravel the mechanical laws at the nanoscale. Most studies focused on isotropic set-ups, while realistic graphene membranes are often subject to strongly anisotropic constraint…
▽ More
Graphene is a powerful membrane prototype for both applications and fundamental research. Rheological phenomena including indentation, twisting, and wrinkling in deposited and suspended graphene are actively investigated to unravel the mechanical laws at the nanoscale. Most studies focused on isotropic set-ups, while realistic graphene membranes are often subject to strongly anisotropic constraints, with important consequences for the rheology, strain, indentation, and friction in engineering conditions.
△ Less
Submitted 6 June, 2023;
originally announced June 2023.
-
Anisotropic Frictional Response of Texture Induced Strained Graphene
Authors:
Andrea Mescola,
Guido Paolicelli,
Roberto Guarino,
James G. McHugh,
Sean P. Ogilvie,
Alberto Rota,
Enrico Gnecco,
Erica Iacob,
Sergio Valeri,
Nicola M. Pugno,
Venkata Gadhamshetty,
Muhammad M. Rahman,
Pulickel M. Ajayan,
Alan B. Dalton,
Manoj Tripathi
Abstract:
Friction-induced energy dissipation impedes the performance of nanoscale devices during their relative motion. Nevertheless, an ingeniously designed structure which utilizes graphene top** can tune the friction force signal by inducing local strain. The present work reports cap** of graphene over Si grooved surfaces of different pitch lengths from sub-nanoscale (P=40 nm) to a quarter of a micr…
▽ More
Friction-induced energy dissipation impedes the performance of nanoscale devices during their relative motion. Nevertheless, an ingeniously designed structure which utilizes graphene top** can tune the friction force signal by inducing local strain. The present work reports cap** of graphene over Si grooved surfaces of different pitch lengths from sub-nanoscale (P=40 nm) to a quarter of a micron (P= 250 nm). The variation in the pitch lengths induces different strains in graphene revealed by scanning probe techniques, Raman spectroscopy and molecular dynamics (MD) simulation. The asymmetric straining of C-C bonds over the groove architecture is exploited through friction force microscopy in different directions of orthogonal and parallel to groove axis. The presence of graphene lubricates the textured surface by a factor of 10 and periodically dissipated friction force, which was found to be stochastic over the bare surface. For the first time, we presented transformation of the lubrication into an ultra-low friction force by a factor of 20 over the crest scanning parallel to the groove axis. Such anisotropy is found to be insignificant at the bare textured system, clearly demonstrating the strain-dependent regulation of friction force. Our results are applicable for graphene, and other 2D materials covered corrugated structures with movable components such as NEMS, nanoscale gears and robotics.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
Surface passivation by graphene in the lubrication of iron: A comparison with bronze
Authors:
Diego Marchetto,
Paolo Restuccia,
Antonio Ballestrazzi,
M. C. Righi,
Alberto Rota,
Sergio Valeri
Abstract:
It has been recently reported that graphene is able to significantly reduce the friction coefficient of steel-on-steel sliding contacts. The microscopic origin of this behavior has been attributed to the mechanical action of load carrying capacity. However, a recent work highlighted the importance of the chemical action of graphene. According to this work graphene reduces the adhesion of iron inte…
▽ More
It has been recently reported that graphene is able to significantly reduce the friction coefficient of steel-on-steel sliding contacts. The microscopic origin of this behavior has been attributed to the mechanical action of load carrying capacity. However, a recent work highlighted the importance of the chemical action of graphene. According to this work graphene reduces the adhesion of iron interfaces by reducing the surface energy thanks to a passivation effect. The aim of the present work is to clarify the still debated lubricating behavior of graphene flakes. We perform pin-on-disc experiments using liquid dispersed graphene solution as a lubricant. Two different materials, pure iron and bronze are tested against 100Cr6 steel. Raman spectroscopy is used to analyze the surfaces after the friction tests. The results of these tests prove that graphene flakes have a beneficial effect on the friction coefficient. At the same time they show a tendency of graphene to passivate the native iron surfaces that are exposed during sliding as a consequence of wear.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
Frictional Transition from Superlubric Islands to Pinned Monolayers
Authors:
Matteo Pierno,
Lorenzo Bruschi,
Giampaolo Mistura,
Guido Paolicelli,
Alessandro di Bona,
Sergio Valeri,
Roberto Guerra,
Andrea Vanossi,
Erio Tosatti
Abstract:
The inertial sliding of physisorbed submonolayer islands on crystal surfaces contains unexpected information on the exceptionally incommensurate smooth sliding state associated with superlubricity and on the mechanisms of its disappearance. Here we show in a joint quartz crystal microbalance (QCM) and molecular dynamics (MD) simulation case study of Xe on Cu(111) how superlubricity emerges in the…
▽ More
The inertial sliding of physisorbed submonolayer islands on crystal surfaces contains unexpected information on the exceptionally incommensurate smooth sliding state associated with superlubricity and on the mechanisms of its disappearance. Here we show in a joint quartz crystal microbalance (QCM) and molecular dynamics (MD) simulation case study of Xe on Cu(111) how superlubricity emerges in the large size limit of naturally incommensurate Xe islands. Theory also predicts, as coverage approaches a full monolayer, an abrupt adhesion-driven 2D density compression of order several %, implying here a hysteretic jump from superlubric free islands to a pressurized commensurate immobile monolayer. This scenario is fully supported by QCM data showing remarkably large slip times at increasing submonolayer coverages, signaling superlubricity, followed by a dramatic drop to zero for the dense commensurate monolayer. Careful analysis of this variety of island sliding phenomena will be mandatory in future applications of friction of crystal-adsorbate interfaces.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
-
Image charge screening: a new approach to enhance magnetic ordering temperatures
Authors:
S. Altieri,
M. Finazzi,
H. H. Hsieh,
M. W. Haverkort,
H. -J. Lin,
C. T. Chen,
S. Frabboni,
G. C. Gazzadi,
A. Rota,
S. Valeri,
L. H. Tjeng
Abstract:
We have tested the concept of image charge screening as a new approach to enhance magnetic ordering temperatures and superexchange interactions in ultra thin films. Using a 3 monolayer NiO(100) film grown on Ag(100) and an identically thin film on MgO(100) as model systems, we observed that the Neel temperature of the NiO film on the highly polarizable metal substrate is 390 K while that of the…
▽ More
We have tested the concept of image charge screening as a new approach to enhance magnetic ordering temperatures and superexchange interactions in ultra thin films. Using a 3 monolayer NiO(100) film grown on Ag(100) and an identically thin film on MgO(100) as model systems, we observed that the Neel temperature of the NiO film on the highly polarizable metal substrate is 390 K while that of the film on the poorly polarizable insulator substrate is below 40 K. This demonstrates that screening by highly polarizable media may point to a practical way towards designing strongly correlated oxide nanostructures with greatly improved magnetic properties.
△ Less
Submitted 10 June, 2008;
originally announced June 2008.
