-
Hydrogen crystals reduce dissipation in superconducting resonators
Authors:
Francesco Valenti,
Andrew N. Kanagin,
Andreas Angerer,
Luiza Buimaga-Iarinca,
Cristian Morari,
Jörg Schmiedmayer,
Ioan M. Pop
Abstract:
We show that the internal quality factors of high impedance superconducting resonators made of granular aluminum can be improved by coating them with micrometric films of solid para-hydrogen molecular crystals. We attribute the average measured $\approx 8\%$ reduction in dissipation to absorption of stray terahertz radiation at the crystal-resonator interface and the subsequent dissipation of its…
▽ More
We show that the internal quality factors of high impedance superconducting resonators made of granular aluminum can be improved by coating them with micrometric films of solid para-hydrogen molecular crystals. We attribute the average measured $\approx 8\%$ reduction in dissipation to absorption of stray terahertz radiation at the crystal-resonator interface and the subsequent dissipation of its energy in the form of phonons below the pair-breaking gap. Our results prove that, contrary to expectations, replacing the vacuum dielectric atop a superconducting resonator can be beneficial, thanks to the added protection against Cooper pair-braking terahertz radiation. Moreover, at the level of internal quality factors in the $10^5$ range, the hydrogen crystal does not introduce additional losses, which is promising for embedding impurities to couple to superconducting thin-film devices in hybrid quantum architectures.
△ Less
Submitted 5 April, 2024; v1 submitted 6 June, 2023;
originally announced June 2023.
-
Two-level system hyperpolarization using a quantum Szilard engine
Authors:
Martin Spiecker,
Patrick Paluch,
Nicolas Gosling,
Niv Drucker,
Shlomi Matityahu,
Daria Gusenkova,
Simon Günzler,
Dennis Rieger,
Ivan Takmakov,
Francesco Valenti,
Patrick Winkel,
Richard Gebauer,
Oliver Sander,
Gianluigi Catelani,
Alexander Shnirman,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Yonatan Cohen,
Ioan M. Pop
Abstract:
The innate complexity of solid state physics exposes superconducting quantum circuits to interactions with uncontrolled degrees of freedom degrading their coherence. By using a simple stabilization sequence we show that a superconducting fluxonium qubit is coupled to a two-level system (TLS) environment of unknown origin, with a relatively long energy relaxation time exceeding $50\,\text{ms}$. Imp…
▽ More
The innate complexity of solid state physics exposes superconducting quantum circuits to interactions with uncontrolled degrees of freedom degrading their coherence. By using a simple stabilization sequence we show that a superconducting fluxonium qubit is coupled to a two-level system (TLS) environment of unknown origin, with a relatively long energy relaxation time exceeding $50\,\text{ms}$. Implementing a quantum Szilard engine with an active feedback control loop allows us to decide whether the qubit heats or cools its TLS environment. The TLSs can be cooled down resulting in a four times lower qubit population, or they can be heated to manifest themselves as a negative temperature environment corresponding to a qubit population of $\sim 80\,\%$. We show that the TLSs and the qubit are each other's dominant loss mechanism and that the qubit relaxation is independent of the TLS populations. Understanding and mitigating TLS environments is therefore not only crucial to improve qubit lifetimes but also to avoid non-Markovian qubit dynamics.
△ Less
Submitted 22 May, 2024; v1 submitted 1 April, 2022;
originally announced April 2022.
-
Operating in a deep underground facility improves the locking of gradiometric fluxonium qubits at the sweet spots
Authors:
Daria Gusenkova,
Francesco Valenti,
Martin Spiecker,
Simon Günzler,
Patrick Paluch,
Dennis Rieger,
Larisa-Milena Pioraş-Ţimbolmaş,
Liviu P. Zârbo,
Nicola Casali,
Ivan Colantoni,
Angelo Cruciani,
Stefano Pirro,
Laura Cardani,
Alexandru Petrescu,
Wolfgang Wernsdorfer,
Patrick Winkel,
Ioan M. Pop
Abstract:
We demonstrate flux-bias locking and operation of a gradiometric fluxonium artificial atom using two symmetric granular aluminum (grAl) loops to implement the superinductor. The gradiometric fluxonium shows two orders of magnitude suppression of sensitivity to homogeneous magnetic fields, which can be an asset for hybrid quantum systems requiring strong magnetic field biasing. By cooling down the…
▽ More
We demonstrate flux-bias locking and operation of a gradiometric fluxonium artificial atom using two symmetric granular aluminum (grAl) loops to implement the superinductor. The gradiometric fluxonium shows two orders of magnitude suppression of sensitivity to homogeneous magnetic fields, which can be an asset for hybrid quantum systems requiring strong magnetic field biasing. By cooling down the device in an external magnetic field while crossing the metal-to-superconductor transition, the gradiometric fluxonium can be locked either at $0$ or $Φ_0/2$ effective flux bias, corresponding to an even or odd number of trapped fluxons, respectively. At mK temperatures, the fluxon parity prepared during initialization survives to magnetic field bias exceeding $100 \,Φ_0$. However, even for states biased in the vicinity of $1 \,Φ_0$, we observe unexpectedly short fluxon lifetimes of a few hours, which cannot be explained by thermal or quantum phase slips. When operating in a deep-underground cryostat of the Gran Sasso laboratory, the fluxon lifetimes increase to days, indicating that ionizing events activate phase slips in the grAl superinductor.
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Subgap kinetic inductance detector sensitive to 85-GHz radiation
Authors:
F. Levy-Bertrand,
A. Benoît,
O. Bourrion,
M. Calvo,
A. Catalano,
J. Goupy,
F. Valenti,
N. Maleeva,
L. Grünhaupt,
I. M. Pop,
A. Monfardini
Abstract:
We have fabricated an array of subgap kinetic inductance detectors (SKIDs) made of granular aluminum ($T_c\sim$2~K) sensitive in the 80-90 GHz frequency band and operating at 300~mK. We measure a noise equivalent power of $1.3\times10^{-16}$~W/Hz$^{0.5}$ on average and $2.6\times10^{-17}$~W/Hz$^{0.5}$ at best, for an illuminating power of 50~fW per pixel. Even though the circuit design of SKIDs is…
▽ More
We have fabricated an array of subgap kinetic inductance detectors (SKIDs) made of granular aluminum ($T_c\sim$2~K) sensitive in the 80-90 GHz frequency band and operating at 300~mK. We measure a noise equivalent power of $1.3\times10^{-16}$~W/Hz$^{0.5}$ on average and $2.6\times10^{-17}$~W/Hz$^{0.5}$ at best, for an illuminating power of 50~fW per pixel. Even though the circuit design of SKIDs is identical to that of the kinetic inductance detectors (KIDs), the SKIDs operating principle is based on their sensitivity to subgap excitations. This detection scheme is advantageous because it avoids having to lower the operating temperature proportionally to the lowest detectable frequency. The SKIDs presented here are intrinsically selecting the 80-90 GHz frequency band, well below the superconducting spectral gap of the film, at approximately 180 GHz.
△ Less
Submitted 6 April, 2021; v1 submitted 8 October, 2020;
originally announced October 2020.
-
Quantum non-demolition dispersive readout of a superconducting artificial atom using large photon numbers
Authors:
Daria Gusenkova,
Martin Spiecker,
Richard Gebauer,
Madita Willsch,
Francesco Valenti,
Nick Karcher,
Lukas Grünhaupt,
Ivan Takmakov,
Patrick Winkel,
Dennis Rieger,
Alexey V. Ustinov,
Nicolas Roch,
Wolfgang Wernsdorfer,
Kristel Michielsen,
Oliver Sander,
Ioan M. Pop
Abstract:
Reading out the state of superconducting artificial atoms typically relies on dispersive coupling to a readout resonator. For a given system noise temperature, increasing the circulating photon number $\bar{n}$ in the resonator enables a shorter measurement time and is therefore expected to reduce readout errors caused by spontaneous atom transitions. However, increasing $\bar{n}$ is generally obs…
▽ More
Reading out the state of superconducting artificial atoms typically relies on dispersive coupling to a readout resonator. For a given system noise temperature, increasing the circulating photon number $\bar{n}$ in the resonator enables a shorter measurement time and is therefore expected to reduce readout errors caused by spontaneous atom transitions. However, increasing $\bar{n}$ is generally observed to also increase these transition rates. Here we present a fluxonium artificial atom in which we measure an overall flat dependence of the transition rates between its first two states as a function of $\bar{n}$, up to $\bar{n}\approx200$. Despite the fact that we observe the expected decrease of the dispersive shift with increasing readout power, the signal-to-noise ratio continuously improves with increasing $\bar{n}$. Even without the use of a parametric amplifier, at $\bar{n}=74$, we measure fidelities of 99% and 93% for feedback-assisted ground and excited state preparation, respectively.
△ Less
Submitted 20 November, 2020; v1 submitted 30 September, 2020;
originally announced September 2020.
-
Superconducting granular aluminum resonators resilient to magnetic fields up to 1 Tesla
Authors:
K. Borisov,
D. Rieger,
P. Winkel,
F. Henriques,
F. Valenti,
A. Ionita,
M. Wessbecher,
M. Spiecker,
D. Gusenkova,
I. M. Pop,
W. Wernsdorfer
Abstract:
High kinetic inductance materials constitute a valuable resource for superconducting quantum circuits and hybrid architectures. Superconducting granular aluminum (grAl) reaches kinetic sheet inductances in the nH/$\square$ range, with proven applicability in superconducting quantum bits and microwave detectors. Here we show that the single photon internal quality factor $Q_{\mathrm{i}}$ of grAl mi…
▽ More
High kinetic inductance materials constitute a valuable resource for superconducting quantum circuits and hybrid architectures. Superconducting granular aluminum (grAl) reaches kinetic sheet inductances in the nH/$\square$ range, with proven applicability in superconducting quantum bits and microwave detectors. Here we show that the single photon internal quality factor $Q_{\mathrm{i}}$ of grAl microwave resonators exceeds $10^5$ in magnetic fields up to 1T, aligned in-plane to the grAl films. Small perpendicular magnetic fields, in the range of 0.5mT, enhance $Q_{\mathrm{i}}$ by approximately 15%, possibly due to the introduction of quasiparticle traps in the form of fluxons. Further increasing the perpendicular field deteriorates the resonators' quality factor. These results open the door for the use of high kinetic inductance grAl structures in circuit quantum electrodynamics and hybrid architectures with magnetic field requirements.
△ Less
Submitted 11 June, 2020; v1 submitted 9 June, 2020;
originally announced June 2020.
-
Reducing the impact of radioactivity on quantum circuits in a deep-underground facility
Authors:
Laura Cardani,
Francesco Valenti,
Nicola Casali,
Gianluigi Catelani,
Thibault Charpentier,
Massimiliano Clemenza,
Ivan Colantoni,
Angelo Cruciani,
Luca Gironi,
Lukas Grünhaupt,
Daria Gusenkova,
Fabio Henriques,
Marc Lagoin,
Maria Martinez,
Giorgio Pettinari,
Claudia Rusconi,
Oliver Sander,
Alexey V. Ustinov,
Marc Weber,
Wolfgang Wernsdorfer,
Marco Vignati,
Stefano Pirro,
Ioan M. Pop
Abstract:
As quantum coherence times of superconducting circuits have increased from nanoseconds to hundreds of microseconds, they are currently one of the leading platforms for quantum information processing. However, coherence needs to further improve by orders of magnitude to reduce the prohibitive hardware overhead of current error correction schemes. Reaching this goal hinges on reducing the density of…
▽ More
As quantum coherence times of superconducting circuits have increased from nanoseconds to hundreds of microseconds, they are currently one of the leading platforms for quantum information processing. However, coherence needs to further improve by orders of magnitude to reduce the prohibitive hardware overhead of current error correction schemes. Reaching this goal hinges on reducing the density of broken Cooper pairs, so-called quasiparticles. Here, we show that environmental radioactivity is a significant source of nonequilibrium quasiparticles. Moreover, ionizing radiation introduces time-correlated quasiparticle bursts in resonators on the same chip, further complicating quantum error correction. Operating in a deep-underground lead-shielded cryostat decreases the quasiparticle burst rate by a factor fifty and reduces dissipation up to a factor four, showcasing the importance of radiation abatement in future solid-state quantum hardware.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Implementation of a transmon qubit using superconducting granular aluminum
Authors:
Patrick Winkel,
Kiril Borisov,
Lukas Grünhaupt,
Dennis Rieger,
Martin Spiecker,
Francesco Valenti,
Alexey V. Ustinov,
Wolfgang Wernsdorfer,
Ioan M. Pop
Abstract:
The high kinetic inductance offered by granular aluminum (grAl) has recently been employed for linear inductors in superconducting high-impedance qubits and kinetic inductance detectors. Due to its large critical current density compared to typical Josephson junctions, its resilience to external magnetic fields, and its low dissipation, grAl may also provide a robust source of non-linearity for st…
▽ More
The high kinetic inductance offered by granular aluminum (grAl) has recently been employed for linear inductors in superconducting high-impedance qubits and kinetic inductance detectors. Due to its large critical current density compared to typical Josephson junctions, its resilience to external magnetic fields, and its low dissipation, grAl may also provide a robust source of non-linearity for strongly driven quantum circuits, topological superconductivity, and hybrid systems. Having said that, can the grAl non-linearity be sufficient to build a qubit? Here we show that a small grAl volume ($10 \times 200 \times 500 \,\mathrm{nm^3}$) shunted by a thin film aluminum capacitor results in a microwave oscillator with anharmonicity $α$ two orders of magnitude larger than its spectral linewidth $Γ_{01}$, effectively forming a transmon qubit. With increasing drive power, we observe several multi-photon transitions starting from the ground state, from which we extract $α= 2 π\times 4.48\,\mathrm{MHz}$. Resonance fluorescence measurements of the $|0> \rightarrow |1>$ transition yield an intrinsic qubit linewidth $γ= 2 π\times 10\,\mathrm{kHz}$, corresponding to a lifetime of $16\,\mathrm{μs}$. This linewidth remains below $2 π\times 150\,\mathrm{kHz}$ for in-plane magnetic fields up to $\sim70\,\mathrm{mT}$.
△ Less
Submitted 27 October, 2023; v1 submitted 6 November, 2019;
originally announced November 2019.
-
Phonon traps reduce the quasiparticle density in superconducting circuits
Authors:
Fabio Henriques,
Francesco Valenti,
Thibault Charpentier,
Marc Lagoin,
Clement Gouriou,
Maria Martínez,
Laura Cardani,
Marco Vignati,
Lukas Grünhaupt,
Daria Gusenkova,
Julian Ferrero,
Sebastian T. Skacel,
Wolfgang Wernsdorfer,
Alexey V. Ustinov,
Gianluigi Catelani,
Oliver Sander,
Ioan M. Pop
Abstract:
Out of equilibrium quasiparticles (QPs) are one of the main sources of decoherence in superconducting quantum circuits, and are particularly detrimental in devices with high kinetic inductance, such as high impedance resonators, qubits, and detectors. Despite significant progress in the understanding of QP dynamics, pinpointing their origin and decreasing their density remain outstanding tasks. Th…
▽ More
Out of equilibrium quasiparticles (QPs) are one of the main sources of decoherence in superconducting quantum circuits, and are particularly detrimental in devices with high kinetic inductance, such as high impedance resonators, qubits, and detectors. Despite significant progress in the understanding of QP dynamics, pinpointing their origin and decreasing their density remain outstanding tasks. The cyclic process of recombination and generation of QPs implies the exchange of phonons between the superconducting thin film and the underlying substrate. Reducing the number of substrate phonons with frequencies exceeding the spectral gap of the superconductor should result in a reduction of QPs. Indeed, we demonstrate that surrounding high impedance resonators made of granular aluminum (grAl) with lower gapped thin film aluminum islands increases the internal quality factors of the resonators in the single photon regime, suppresses the noise, and reduces the rate of observed QP bursts. The aluminum islands are positioned far enough from the resonators to be electromagnetically decoupled, thus not changing the resonator frequency, nor the loading. We therefore attribute the improvements observed in grAl resonators to phonon trap** at frequencies close to the spectral gap of aluminum, well below the grAl gap.
△ Less
Submitted 20 August, 2019; v1 submitted 12 August, 2019;
originally announced August 2019.
-
Electrodynamics of granular aluminum from superconductor to insulator: observation of collective superconducting modes
Authors:
F. Levy-Bertrand,
T. Klein,
T. Grenet,
O. Dupré,
A. Benoît,
A. Bideaud,
O. Bourrion,
M. Calvo,
A. Catalano,
A. Gomez,
J. Goupy,
L. Grünhaupt,
U. v. Luepke,
N. Maleeva,
F. Valenti,
I. M. Pop,
A. Monfardini
Abstract:
We report on a detailed study of the optical response and $T_c-ρ$ phase diagram ($T_c$ being the superconducting critical temperature and $ρ$ the normal state resistivity of the film) of granular aluminum, combining transport measurements and a high resolution optical spectroscopy technique. The $T_c-ρ$ phase diagram is discussed as resulting from an interplay between the phase stiffness, the Coul…
▽ More
We report on a detailed study of the optical response and $T_c-ρ$ phase diagram ($T_c$ being the superconducting critical temperature and $ρ$ the normal state resistivity of the film) of granular aluminum, combining transport measurements and a high resolution optical spectroscopy technique. The $T_c-ρ$ phase diagram is discussed as resulting from an interplay between the phase stiffness, the Coulomb repulsion and the superconducting gap $Δ$. We provide a direct evidence for two different types of well resolved sub-gap absorptions, at $ω_1\simeqΔ$ and at $Δ\lesssimω_2\lesssim2Δ$ (decreasing with increasing resistivity).
△ Less
Submitted 13 March, 2019; v1 submitted 15 February, 2019;
originally announced February 2019.
-
Interplay between kinetic inductance, non-linearity and quasiparticle dynamics in granular aluminum MKIDs
Authors:
Francesco Valenti,
Fábio Henriques,
Gianluigi Catelani,
Nataliya Maleeva,
Lukas Grünhaupt,
Uwe von Lüpke,
Sebastian T. Skacel,
Patrick Winkel,
Alexander Bilmes,
Alexey V. Ustinov,
Johannes Goupy,
Martino Calvo,
Alain Benoît,
Florence Lévy-Bertrand,
Alessandro Monfardini,
Ioan M. Pop
Abstract:
Microwave kinetic inductance detectors (MKIDs) are thin film, cryogenic, superconducting resonators. Incident Cooper pair-breaking radiation increases their kinetic inductance, thereby measurably lowering their resonant frequency. For a given resonant frequency, the highest MKID responsivity is obtained by maximizing the kinetic inductance fraction $α$. However, in circuits with $α$ close to unity…
▽ More
Microwave kinetic inductance detectors (MKIDs) are thin film, cryogenic, superconducting resonators. Incident Cooper pair-breaking radiation increases their kinetic inductance, thereby measurably lowering their resonant frequency. For a given resonant frequency, the highest MKID responsivity is obtained by maximizing the kinetic inductance fraction $α$. However, in circuits with $α$ close to unity, the low supercurrent density reduces the maximum number of readout photons before bifurcation due to self-Kerr non-linearity, therefore setting a bound for the maximum $α$ before the noise equivalent power (NEP) starts to increase. By fabricating granular aluminum MKIDs with different resistivities, we effectively sweep their kinetic inductance from tens to several hundreds of pH per square. We find a NEP minimum in the range of $25\; \text{aW}/\sqrt{\text{Hz}}$ at $α\approx 0.9$, which results from a tradeoff between the onset of non-linearity and a non-monotonic dependence of the noise spectral density vs. resistivity.
△ Less
Submitted 10 November, 2018; v1 submitted 29 October, 2018;
originally announced October 2018.
-
Granular aluminum: A superconducting material for high impedance quantum circuits
Authors:
Lukas Grünhaupt,
Martin Spiecker,
Daria Gusenkova,
Nataliya Maleeva,
Sebastian T. Skacel,
Ivan Takmakov,
Francesco Valenti,
Patrick Winkel,
Hannes Rotzinger,
Alexey V. Ustinov,
Ioan M. Pop
Abstract:
Superconducting quantum information processing machines are predominantly based on microwave circuits with relatively low characteristic impedance, of about 100 Ohm, and small anharmonicity, which can limit their coherence and logic gate fidelity. A promising alternative are circuits based on so-called superinductors, with characteristic impedances exceeding the resistance quantum $R_Q = 6.4$ k…
▽ More
Superconducting quantum information processing machines are predominantly based on microwave circuits with relatively low characteristic impedance, of about 100 Ohm, and small anharmonicity, which can limit their coherence and logic gate fidelity. A promising alternative are circuits based on so-called superinductors, with characteristic impedances exceeding the resistance quantum $R_Q = 6.4$ k$Ω$. However, previous implementations of superinductors, consisting of mesoscopic Josephson junction arrays, can introduce unintended nonlinearity or parasitic resonant modes in the qubit vicinity, degrading its coherence. Here we present a fluxonium qubit design using a granular aluminum (grAl) superinductor strip. Granular aluminum is a particularly attractive material, as it self-assembles into an effective junction array with a remarkably high kinetic inductance, and its fabrication can be in-situ integrated with standard aluminum circuit processing. The measured qubit coherence time $T_2^R$ up to 30 $μ$s illustrates the potential of grAl for applications ranging from protected qubit designs to quantum limited amplifiers and detectors.
△ Less
Submitted 27 September, 2018;
originally announced September 2018.
-
Circuit Quantum Electrodynamics of Granular Aluminum Resonators
Authors:
N. Maleeva,
L. Grünhaupt,
T. Klein,
F. Levy-Bertrand,
O. Dupré,
M. Calvo,
F. Valenti,
P. Winkel,
F. Friedrich,
W. Wernsdorfer,
A. V. Ustinov,
H. Rotzinger,
A. Monfardini,
M. V. Fistul,
I. M. Pop
Abstract:
The introduction of crystalline defects or dopants can give rise to so-called "dirty superconductors", characterized by reduced coherence length and quasiparticle mean free path. In particular, granular superconductors such as Granular Aluminum (GrAl), consisting of remarkably uniform grains connected by Josephson contacts have attracted interest since the sixties thanks to their rich phase diagra…
▽ More
The introduction of crystalline defects or dopants can give rise to so-called "dirty superconductors", characterized by reduced coherence length and quasiparticle mean free path. In particular, granular superconductors such as Granular Aluminum (GrAl), consisting of remarkably uniform grains connected by Josephson contacts have attracted interest since the sixties thanks to their rich phase diagram and practical advantages, like increased critical temperature, critical field, and kinetic inductance. Here we report the measurement and modeling of circuit quantum electrodynamics properties of GrAl microwave resonators in a wide frequency range, up to the spectral superconducting gap. Interestingly, we observe self-Kerr coefficients ranging from $10^{-2}$ Hz to $10^5$ Hz, within an order of magnitude from analytic calculations based on GrAl microstructure. This amenable nonlinearity, combined with the relatively high quality factors in the $10^5$ range, open new avenues for applications in quantum information processing and kinetic inductance detectors.
△ Less
Submitted 7 February, 2018; v1 submitted 6 February, 2018;
originally announced February 2018.