-
Accretion Geometry of GX 339-4 in the Hard State: AstroSat View
Authors:
Swadesh Chand,
Gulab C. Dewangan,
Andrzej A. Zdziarski,
Dipankar Bhattacharya,
N. P. S. Mithun,
Santosh V. Vadawale
Abstract:
We perform broadband ($0.7-100$ keV) spectral analysis of five hard state observations of the low-mass back hole X-ray binary GX~339--4 taken by AstroSat during the rising phase of three outbursts from $2019$ to $2022$. We find that the outburst in 2021 was the only successful/full outburst, while the source was unable to make transition to the soft state during the other two outbursts in 2019 and…
▽ More
We perform broadband ($0.7-100$ keV) spectral analysis of five hard state observations of the low-mass back hole X-ray binary GX~339--4 taken by AstroSat during the rising phase of three outbursts from $2019$ to $2022$. We find that the outburst in 2021 was the only successful/full outburst, while the source was unable to make transition to the soft state during the other two outbursts in 2019 and 2022. Our spectral analysis employs two different model combinations, requiring two separate Comptonizing regions and their associated reflection components, and soft X-ray excess emission. The harder Comptonizing component dominates the overall bolometric luminosity, while the softer one remains relatively weak. Our spectral fits indicate that the disk evolves with the source luminosity, where the inner disk radius decreases with increasing luminosity. However, the disk remains substantially truncated throughout all the observations at the source luminosity of $\sim2-8\%\times$ of the Eddington luminosity. We note that our assumption of the soft X-ray excess emission as disk blackbody may not be realistic, and this kind of soft excess may arise due the non-homogeneity in the disk/corona geometry. Our temporal analysis deriving the power density spectra suggests that the break frequency increases with the source luminosity. Furthermore, our analysis demonstrates a consistency between the inner disk radii estimated from break frequency of the power density spectra and those obtained from the reflection modelling, supporting the truncated disk geometry in the hard state.
△ Less
Submitted 15 June, 2024;
originally announced June 2024.
-
DarsakX: A Python Package for Designing and Analyzing Imaging Performance of X-ray Telescopes
Authors:
Neeraj K. Tiwari,
Santosh V. Vadawale,
N. P. S. Mithun,
C. S. Vaishnava,
Bharath Saiguhan
Abstract:
The imaging performance and sensitivity of an X-ray telescope when observing astrophysical sources are primarily governed by the optical design, geometrical uncertainties (figure errors, surface roughness, and mirror alignment inaccuracies), and the reflectivity properties of the X-ray reflecting mirror surface. To thoroughly evaluate the imaging performance of an X-ray telescope with an optical d…
▽ More
The imaging performance and sensitivity of an X-ray telescope when observing astrophysical sources are primarily governed by the optical design, geometrical uncertainties (figure errors, surface roughness, and mirror alignment inaccuracies), and the reflectivity properties of the X-ray reflecting mirror surface. To thoroughly evaluate the imaging performance of an X-ray telescope with an optical design similar to Wolter-1 optics, which comprises multiple shells with known geometrical uncertainties and mirror reflectivity properties, appropriate computational tools are essential. These tools are used to estimate the angular resolution and effective area for various source energies and locations and, more importantly, to assess the impact of figure errors on the telescope's imaging performance. Additionally, they can also be used to optimize optics geometry by modifying it in reference to the Wolter-1 optics, aiming to minimize the optical aberration associated with the Wolter-1 configuration. In this paper, we introduce DarsakX, a Python-based ray tracing computational tool specifically designed to estimate the imaging performance of a multi-shell X-ray telescope. DarsakX has the capability to simulate the impact of figure errors present in the axial direction of a mirror shell. The geometrical shape of the mirror shells can be defined as a combination of figure error with the base optics, such as Wolter-1 or Conical optics. Additionally, DarsakX allows the exploration of new optical designs involving two reflections similar to Wolter-1 optics but with an improved angular resolution for wide-field telescopes. Developed through an analytical approach, DarsakX ensures computational efficiency, enabling fast processing.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Multi-wavelength observations of a B-class flare using XSM, AIA, and XRT
Authors:
Yamini K. Rao,
B. Mondal,
Giulio Del Zanna,
N. P. S. Mithun,
S. V. Vadawale,
K. K. Reeves,
Helen E. Mason,
Anil Bhardwaj
Abstract:
We present multi-wavelength observations by Chandrayaan-2/XSM, SDO/AIA and Hinode/XRT of a B-class flare observed on 25th February, 2021, originating from an active region (AR 12804) near the North-West limb. The microflare lasts for approx 30 mins and is composed of hot loops reaching temperatures of 10 MK. We report excellent agreement (within 20 percent) for the average effective temperatures o…
▽ More
We present multi-wavelength observations by Chandrayaan-2/XSM, SDO/AIA and Hinode/XRT of a B-class flare observed on 25th February, 2021, originating from an active region (AR 12804) near the North-West limb. The microflare lasts for approx 30 mins and is composed of hot loops reaching temperatures of 10 MK. We report excellent agreement (within 20 percent) for the average effective temperatures obtained at the flare peak from all the three instruments, which have different temperature sensitivities. The XRT filter combination of Be-thin and Be-med provides an excellent opportunity to measure the high-temperatures in such microflare events. The elemental abundances during the evolution of the microflare are also studied and observed to drop towards photospheric values at the flare peak time, compared to coronal values during the rise and decay phase. This is consistent with previous XSM studies.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
High hard X-ray polarization in Cygnus X-1 confined to the intermediate hard state: evidence for a variable jet component
Authors:
Tanmoy Chattopadhyay,
Abhay Kumar,
A. R. Rao,
Yash Bhargava,
Santosh V. Vadawale,
Ajay Ratheesh,
Gulab Dewangan,
Dipankar Bhattacharyay,
Mithun N. P. S.,
Varun Bhalerao
Abstract:
Cygnus X-1, the well-known accreting black hole system, exhibits several observational features hinting at an intricate interplay between the accretion disk, its atmosphere known as the corona and the putative relativistic jet. It has been extensively studied using all available observational methods, including using the newly available technique of sensitive X-ray polarimetry. X-ray polarization…
▽ More
Cygnus X-1, the well-known accreting black hole system, exhibits several observational features hinting at an intricate interplay between the accretion disk, its atmosphere known as the corona and the putative relativistic jet. It has been extensively studied using all available observational methods, including using the newly available technique of sensitive X-ray polarimetry. X-ray polarization characteristics are distinct for coronal and jet emissions. The low X-ray polarization measured below $\sim$100 keV is understood as arising from the corona. In contrast, the high polarization measurements reported above $\sim$400 keV required a separate jet-dominated spectral component, which spectroscopy does not demonstrate conclusively. Here we report precise polarization measurements in the 100-380 keV region made during three different sub-classes of spectral states of the source using the CZTI instrument onboard {\em AstroSat}. A high polarization (23$\pm$4 \%) is found mainly in the Intermediate Hard State of the source, and the energy-resolved measurements smoothly connect the coronal and the jet regimes. When high polarization is observed, the simultaneous spectral data hints at a separate power law component above 100 keV. We examine the possible sources of this energy-dependent high polarization in Cygnus X-1.
△ Less
Submitted 30 November, 2023; v1 submitted 6 June, 2023;
originally announced June 2023.
-
Evolution of elemental abundances in hot active region cores from Chandrayaan-2 XSM observations
Authors:
Biswajit Mondal,
Santosh V. Vadawale,
Giulio Del Zanna,
N. P. S. Mithun,
Aveek Sarkar,
Helen E. Mason,
P. Janardhan,
Anil Bhardwaj
Abstract:
The First Ionization Potential (FIP) bias, whereby elemental abundances for low FIP elements in different coronal structures vary from their photospheric values and may also vary with time, has been widely studied. In order to study the temporal variation, and to understand the physical mechanisms giving rise to the FIP bias, we have investigated the hot cores of three ARs using disk-integrated so…
▽ More
The First Ionization Potential (FIP) bias, whereby elemental abundances for low FIP elements in different coronal structures vary from their photospheric values and may also vary with time, has been widely studied. In order to study the temporal variation, and to understand the physical mechanisms giving rise to the FIP bias, we have investigated the hot cores of three ARs using disk-integrated soft X-ray spectroscopic observation with the Solar X-ray Monitor (XSM) onboard Chandrayaan-2. Observations for periods when only one AR was present on the solar disk were used so as to ensure that the AR was the principal contributor to the total X-ray intensity. The average values of temperature and EM were ~3 MK and 3.0E46/cm3 respectively. Regardless of the age and activity of the AR, the elemental abundances of the low FIP elements, Al, Mg, and Si were consistently higher than their photospheric values. The average FIP bias for Mg and Si was ~3, whereas the FIP bias for the mid-FIP element, S, was ~1.5. However, the FIP bias for the lowest FIP element, Al, was observed to be higher than 3, which, if real, suggests a dependence of the FIP bias of low FIP elements on their FIP value. Another major result from our analysis is that the FIP bias of these elements is established in within ~10 hours of emergence of the AR and then remains almost constant throughout its lifetime.
△ Less
Submitted 6 June, 2023; v1 submitted 9 January, 2023;
originally announced January 2023.
-
Role of small-scale impulsive events in heating the X-ray bright points of the quiet Sun
Authors:
Biswajit Mondal,
James A Klimchuk,
Santosh V. Vadawale,
Aveek Sarkar,
Giulio Del Zanna,
P. S. Athiray,
N. P. S. Mithun,
Helen E. Mason,
A. Bhardwaj
Abstract:
Small-scale impulsive events, known as nanoflares, are thought to be one of the prime candidates that can keep the solar corona hot at its multi-million Kelvin temperature. Individual nanoflares are difficult to detect with the current generation instruments; however, their presence can be inferred through indirect techniques such as a Differential Emission Measure (DEM) analysis. Here we employ t…
▽ More
Small-scale impulsive events, known as nanoflares, are thought to be one of the prime candidates that can keep the solar corona hot at its multi-million Kelvin temperature. Individual nanoflares are difficult to detect with the current generation instruments; however, their presence can be inferred through indirect techniques such as a Differential Emission Measure (DEM) analysis. Here we employ this technique to investigate the possibility of nanoflare heating of the quiet corona during the minimum of solar cycle 24. During this minimum, active regions (ARs) were absent on the solar-disk for extended periods. In the absence of ARs, X-ray bright points (XBP) are the dominant contributor to disk-integrated X-rays. We estimate the DEM of the XBPs using observations from the Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 orbiter and the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamic Observatory. XBPs consist of small-scale loops associated with bipolar magnetic fields. We simulate such XBP loops using the EBTEL hydrodynamic code. The lengths and magnetic field strengths of these loops are obtained through a potential field extrapolation of the photospheric magnetogram. Each loop is assumed to be heated by random nanoflares having an energy that depends on the loop properties. The composite nanoflare energy distribution for all the loops has a power-law slope close to -2.5. The simulation output is then used to obtain the integrated DEM. It agrees remarkably well with the observed DEM at temperatures above 1 MK, suggesting that the nanoflare distribution, as predicted by our model, can explain the XBP heating.
△ Less
Submitted 6 January, 2023;
originally announced January 2023.
-
Soft X-ray Spectral Diagnostics of Multi-thermal Plasma in Solar Flares with Chandrayaan-2 XSM
Authors:
N. P. S. Mithun,
Santosh V. Vadawale,
Giulio Del Zanna,
Yamini K. Rao,
Bhuwan Joshi,
Aveek Sarkar,
Biswajit Mondal,
P. Janardhan,
Anil Bhardwaj,
Helen E. Mason
Abstract:
Spectroscopic observations in X-ray wavelengths provide excellent diagnostics of the temperature distribution in solar flare plasma. The Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 mission provides broad-band disk integrated soft X-ray solar spectral measurements in the energy range of 1-15 keV with high spectral resolution and time cadence. In this study, we analyse X-ray spectra of three…
▽ More
Spectroscopic observations in X-ray wavelengths provide excellent diagnostics of the temperature distribution in solar flare plasma. The Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 mission provides broad-band disk integrated soft X-ray solar spectral measurements in the energy range of 1-15 keV with high spectral resolution and time cadence. In this study, we analyse X-ray spectra of three representative GOES C-class flares obtained with the XSM to investigate the evolution of various plasma parameters during the course of the flares. Using the soft X-ray spectra consisting of the continuum and well-resolved line complexes of major elements like Mg, Si, and Fe, we investigate the validity of the isothermal and multi-thermal assumptions on the high temperature components of the flaring plasma. We show that the soft X-ray spectra during the impulsive phase of the high intensity flares are inconsistent with isothermal models and are best fitted with double peaked differential emission measure distributions where the temperature of the hotter component rises faster than that of the cooler component. The two distinct temperature components observed in DEM models during the impulsive phase of the flares suggest the presence of the directly heated plasma in the corona and evaporated plasma from the chromospheric footpoints. We also find that the abundances of low FIP elements Mg, Si, and Fe reduces from near coronal to near photospheric values during the rising phase of the flare and recovers back to coronal values during decay phase, which is also consistent with the chromospheric evaporation scenario.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Experimental verification of off-axis polarimetry with Cadmium Zinc Telluride detectors of AstroSat-CZT Imager
Authors:
C. S. Vaishnava,
N. P. S. Mithun,
Santosh V. Vadawale,
Esakkiappan Aarthy,
Arpit R. Patel,
Hiteshkumar L. Adalja,
Neeraj Kumar Tiwari,
Tinkal Ladiya,
Nilam Navale,
Tanmoy Chattopadhyay,
A. R. Rao,
Varun Bhalerao,
Dipankar Bhattacharya
Abstract:
The Cadmium Zinc Telluride Imager (CZTI) onboard AstroSat consists of an array of a large number of pixellated CZT detectors capable of measuring the polarization of incident hard X-rays. The polarization measurement capability of CZTI for on-axis sources was experimentally confirmed before the launch. CZTI has yielded tantalizing results on the X-ray polarization of the Crab nebula and pulsar in…
▽ More
The Cadmium Zinc Telluride Imager (CZTI) onboard AstroSat consists of an array of a large number of pixellated CZT detectors capable of measuring the polarization of incident hard X-rays. The polarization measurement capability of CZTI for on-axis sources was experimentally confirmed before the launch. CZTI has yielded tantalizing results on the X-ray polarization of the Crab nebula and pulsar in the energy range of 100 - 380 keV. CZTI has also contributed to the measurement of prompt emission polarization for several Gamma-Ray Bursts (GRBs). However, polarization measurements of off-axis sources like GRBs are challenging. It is vital to experimentally calibrate the CZTI sensitivity to off-axis sources to enhance the credence of the measurements. In this context, we report the verification of the off-axis polarimetric capability of pixellated CZT detectors through the controlled experiments carried out with a CZT detector similar to that used in CZTI and extensive Geant4 simulations of the experimental set-up. Our current results show that the CZT detectors can be used to measure the polarization of bright GRBs up to off-axis angles of ~60 degrees. However, at incidence angles between 45-60 degrees, there might be some systematic effects which needs to be taken into account while interpreting the measured polarisation fraction.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Extending the energy range of AstroSat-CZTI up to 380 keV with Compton Spectroscopy
Authors:
Abhay Kumar,
Tanmoy Chattopadhyay,
Santosh V. Vadawale,
A. R. Rao,
Mithun N. P. S.,
Varun Bhalerao,
Dipankar Bhattacharya
Abstract:
The CZTI (Cadmium Zinc Telluride Imager) onboard AstroSat is a high energy coded mask imager and spectrometer in the energy range of 20 - 100 keV. Above 100 keV, the dominance of Compton scattering cross-section in CZTI results in a significant number of 2-pixel Compton events and these have been successfully utilized for polarization analysis of Crab pulsar and nebula (and transients like Gamma-r…
▽ More
The CZTI (Cadmium Zinc Telluride Imager) onboard AstroSat is a high energy coded mask imager and spectrometer in the energy range of 20 - 100 keV. Above 100 keV, the dominance of Compton scattering cross-section in CZTI results in a significant number of 2-pixel Compton events and these have been successfully utilized for polarization analysis of Crab pulsar and nebula (and transients like Gamma-ray bursts) in 100 - 380 keV. These 2-pixel Compton events can also be used to extend the spectroscopic energy range of CZTI up to 380 keV for bright sources. However, unlike the spectroscopy in primary energy range, where simultaneous background measurement is available from masked pixels, Compton spectroscopy requires blank sky observation for background measurement. Background subtraction, in this case, is non-trivial because of the presence of both short-term and long-term temporal variations in the data, which depend on multiple factors like earth rotation and the effect of South Atlantic Anomaly (SAA) regions etc. We have developed a methodology of background selection and subtraction that takes into account for these effects. Here, we describe these background selection and subtraction techniques and validate them using spectroscopy of Crab in the extended energy range of 30 - 380 keV region, and compare the obtained spectral parameters with the INTEGRAL results. This new capability allows for the extension of the energy range of AstroSat spectroscopy and will also enable the simultaneous spectro-polarimetric study of other bright sources like Cygnus X-1.
△ Less
Submitted 24 August, 2022;
originally announced August 2022.
-
Multi-wavelength observations by XSM, Hinode and SDO of an active region. Chemical abundances and temperatures
Authors:
G. Del Zanna,
B. Mondal,
Y. K. Rao,
N. P. S. Mithun,
S. V. Vadawale,
K. K. Reeves,
H. E. Mason,
A. Sarkar,
P. Janardhan,
A. Bhardwaj
Abstract:
We have reviewed the first year of observations of the Solar X-ray Monitor (XSM) onboard Chandrayaan-2, and the available multi-wavelength observations to complement the XSM data, focusing on Solar Dynamics Observatory AIA and Hinode XRT, EIS observations. XSM has provided disk-integrated solar spectra in the 1--15 keV energy range, observing a large number of microflares. We present an analysis o…
▽ More
We have reviewed the first year of observations of the Solar X-ray Monitor (XSM) onboard Chandrayaan-2, and the available multi-wavelength observations to complement the XSM data, focusing on Solar Dynamics Observatory AIA and Hinode XRT, EIS observations. XSM has provided disk-integrated solar spectra in the 1--15 keV energy range, observing a large number of microflares. We present an analysis of multi-wavelength observations of AR 12759 during its disk crossing. We use a new radiometric calibration of EIS to find that the quiescent AR core emission during its disk crossing has a distribution of temperatures and chemical abundances that does not change significantly over time. An analysis of the XSM spectra confirms the EIS results, and shows that the low First Ionization Potential (FIP) elements are enhanced, compared to their photospheric values. The frequent microflares produced by the AR did not affect the abundances of the quiescent AR core. We also present an analysis of one of the flares it produced, SOL2020-04-09T09:32. The XSM analysis indicates isothermal temperatures reaching 6 MK. The lack of very high-T emission is confirmed by AIA. We find excellent agreement between the observed XSM spectrum and the one predicted using an AIA DEM analysis. In contrast, the XRT Al-Poly / Be-thin filter ratio gives lower temperatures for the quiescent and flaring phases. We show that this is due to the sensitivity of this ratio to low temperatures, as the XRT filter ratios predicted with a DEM analysis based on EIS and AIA gives values in good agreement with the observed ones.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Probing into emission mechanisms of GRB 190530A using time-resolved spectra and polarization studies: Synchrotron Origin?
Authors:
Rahul Gupta,
S. Gupta,
T. Chattopadhyay,
V. Lipunov,
A. J. Castro-Tirado,
D. Bhattacharya,
S. B. Pandey,
S. R. Oates,
Amit Kumar,
Y. -D. Hu,
A. F. Valeev,
P. Yu. Minaev,
H. Kumar,
J. Vinko,
Dimple,
V. Sharma,
A. Aryan,
A. Castellón,
A. Gabovich,
A. Moskvitin,
A. Ordasi,
A. Pál,
A. Pozanenko,
B. -B. Zhang,
B. Kumar
, et al. (25 additional authors not shown)
Abstract:
Multi-pulsed GRB 190530A, detected by the GBM and LAT onboard \fermi, is the sixth most fluent GBM burst detected so far. This paper presents the timing, spectral, and polarimetric analysis of the prompt emission observed using \AstroSat and \fermi to provide insight into the prompt emission radiation mechanisms. The time-integrated spectrum shows conclusive proof of two breaks due to peak energy…
▽ More
Multi-pulsed GRB 190530A, detected by the GBM and LAT onboard \fermi, is the sixth most fluent GBM burst detected so far. This paper presents the timing, spectral, and polarimetric analysis of the prompt emission observed using \AstroSat and \fermi to provide insight into the prompt emission radiation mechanisms. The time-integrated spectrum shows conclusive proof of two breaks due to peak energy and a second lower energy break. Time-integrated (55.43 $\pm$ 21.30 \%) as well as time-resolved polarization measurements, made by the Cadmium Zinc Telluride Imager (CZTI) onboard \AstroSat, show a hint of high degree of polarization. The presence of a hint of high degree of polarization and the values of low energy spectral index ($α_{\rm pt}$) do not run over the synchrotron limit for the first two pulses, supporting the synchrotron origin in an ordered magnetic field. However, during the third pulse, $α_{\rm pt}$ exceeds the synchrotron line of death in few bins, and a thermal signature along with the synchrotron component in the time-resolved spectra is observed. Furthermore, we also report the earliest optical observations constraining afterglow polarization using the MASTER (P $<$ 1.3 \%) and the redshift measurement ($z$= 0.9386) obtained with the 10.4m GTC telescopes. The broadband afterglow can be described with a forward shock model for an ISM-like medium with a wide jet opening angle. We determine a circumburst density of $n_{0} \sim$ 7.41, kinetic energy $E_{\rm K} \sim$ 7.24 $\times 10^{54}$ erg, and radiated $γ$-ray energy $E_{\rm γ, iso} \sim$ 6.05 $\times 10^{54}$ erg, respectively.
△ Less
Submitted 4 January, 2022;
originally announced January 2022.
-
Radio, X-ray and extreme-ultraviolet observations of weak energy releases in the `quiet' Sun
Authors:
R. Ramesh,
C. Kathiravan,
N. P. S. Mithun,
S. V. Vadawale
Abstract:
We analyzed ground-based low frequency ($<$100\,MHz) radio spectral and imaging data of the solar corona obtained with the facilities in the Gauribidanur observatory during the same time as the very weak soft X-ray flares (sub A-class, flux $\rm {<}10^{-7}\,Wm^{-2}$ in the 1\,-\,8\,$\rm Å$ wavelength range) from the `quiet' Sun observed with the X-ray Solar Monitor (XSM) onboard Chandrayaan-2 duri…
▽ More
We analyzed ground-based low frequency ($<$100\,MHz) radio spectral and imaging data of the solar corona obtained with the facilities in the Gauribidanur observatory during the same time as the very weak soft X-ray flares (sub A-class, flux $\rm {<}10^{-7}\,Wm^{-2}$ in the 1\,-\,8\,$\rm Å$ wavelength range) from the `quiet' Sun observed with the X-ray Solar Monitor (XSM) onboard Chandrayaan-2 during the recent solar minimum. Non-thermal type I radio burst activity were noticed in close temporal association with the X-ray events. The estimated brightness temperature ($T_{b}$) of the bursts at a typical frequency like 80\,MHz is ${\approx}3{\times}10^{5}$\,K. Extreme-ultraviolet (EUV) observations at 94Å with the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamics Observatory (SDO) revealed a brightening close to the same location and time as the type I radio bursts. As far as we know reports of simultaneous observations of X-ray and/or EUV counterpart to weak transient radio emission at low frequencies from the `quiet' Sun in particular are rare. Considering this and the fact that low frequency radio observations are sensitive to weak energy releases in the solar atmosphere, the results indicate that coordinated observations of similar events would be useful to understand transient activities in the `quiet' Sun.
△ Less
Submitted 17 September, 2021;
originally announced September 2021.
-
Imaging calibration of AstroSat Cadmium Zinc Telluride Imager (CZTI)
Authors:
Ajay Vibhute,
Dipankar Bhattacharya,
N. P. S. Mithun,
V. Bhalerao,
A. R. Rao,
S. V. Vadawale
Abstract:
AstroSat is India's first space-based astronomical observatory, launched on September 28, 2015. One of the payloads aboard AstroSat is the Cadmium Zinc Telluride Imager (CZTI), operating at hard X-rays. CZTI employs a two-dimensional coded aperture mask for the purpose of imaging. In this paper, we discuss various image reconstruction algorithms adopted for the test and calibration of the imaging…
▽ More
AstroSat is India's first space-based astronomical observatory, launched on September 28, 2015. One of the payloads aboard AstroSat is the Cadmium Zinc Telluride Imager (CZTI), operating at hard X-rays. CZTI employs a two-dimensional coded aperture mask for the purpose of imaging. In this paper, we discuss various image reconstruction algorithms adopted for the test and calibration of the imaging capability of CZTI and present results from CZTI on-ground as well as in-orbit image calibration.
△ Less
Submitted 15 August, 2021;
originally announced August 2021.
-
Evolution of Elemental Abundances During B-Class Solar Flares: Soft X-ray Spectral Measurements with Chandrayaan-2 XSM
Authors:
Biswajit Mondal,
Aveek Sarkar,
Santosh V. Vadawale,
N. P. S. Mithun,
P. Janardhan,
Giulio Del Zanna,
Helen E. Mason,
Urmila Mitra-Kraev,
S. Narendranath
Abstract:
The Solar X-ray Spectrometer (XSM) payload onboard Chandrayaan-2 provides disk-integrated solar spectra in the 1-15 keV energy range with an energy resolution of 180 eV (at 5.9 keV) and a cadence of 1~second. During the period from September 2019 to May 2020, covering the minimum of Solar Cycle 24, it observed nine B-class flares ranging from B1.3 to B4.5. Using time-resolved spectroscopic analysi…
▽ More
The Solar X-ray Spectrometer (XSM) payload onboard Chandrayaan-2 provides disk-integrated solar spectra in the 1-15 keV energy range with an energy resolution of 180 eV (at 5.9 keV) and a cadence of 1~second. During the period from September 2019 to May 2020, covering the minimum of Solar Cycle 24, it observed nine B-class flares ranging from B1.3 to B4.5. Using time-resolved spectroscopic analysis during these flares, we examined the evolution of temperature, emission measure, and absolute elemental abundances of four elements -- Mg, Al, Si, and S. These are the first measurements of absolute abundances during such small flares and this study offers a unique insight into the evolution of absolute abundances as the flares evolve. Our results demonstrate that the abundances of these four elements decrease towards their photospheric values during the peak phase of the flares. During the decay phase, the abundances are observed to quickly return to their pre-flare coronal values. The depletion of elemental abundances during the flares is consistent with the standard flare model, suggesting the injection of fresh material into coronal loops as a result of chromospheric evaporation. To explain the quick recovery of the so-called coronal "First Ionization Potential (FIP) bias" we propose two scenarios based on the Ponderomotive force model.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Observations of the Quiet Sun During the Deepest Solar Minimum of the Past Century with Chandrayaan-2 XSM -- Sub-A Class Microflares Outside Active Regions
Authors:
Santosh V. Vadawale,
N. P. S. Mithun,
Biswajit Mondal,
Aveek Sarkar,
P. Janardhan,
Bhuwan Joshi,
Anil Bhardwaj,
M. Shanmugam,
Arpit R. Patel,
Hitesh Kumar L. Adalja,
Shiv Kumar Goyal,
Tinkal Ladiya,
Neeraj Kumar Tiwari,
Nishant Singh,
Sushil Kumar
Abstract:
Solar flares, with energies ranging over several orders of magnitude, result from impulsive release of energy due to magnetic reconnection in the corona. Barring a handful, almost all microflares observed in X-rays are associated with the solar active regions. Here we present, for the first time, a comprehensive analysis of a large sample of quiet Sun microflares observed in soft X-rays by the Sol…
▽ More
Solar flares, with energies ranging over several orders of magnitude, result from impulsive release of energy due to magnetic reconnection in the corona. Barring a handful, almost all microflares observed in X-rays are associated with the solar active regions. Here we present, for the first time, a comprehensive analysis of a large sample of quiet Sun microflares observed in soft X-rays by the Solar X-ray Monitor (XSM) on board the Chandrayaan-2 mission during the 2019-20 solar minimum. A total of 98 microflares having peak flux below GOES A-level were observed by the XSM during observations spanning 76 days. By using the derived plasma temperature and emission measure of these events obtained by fitting the XSM spectra along with volume estimates from concurrent imaging observations in EUV with the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA), we estimated their thermal energies to be ranging from 3e26 to 6e27 erg. We present the frequency distribution of the quiet Sun microflares with energy and discuss the implications of these observations of small-scale magnetic reconnection events outside active regions on coronal heating.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Observations of the Quiet Sun During the Deepest Solar Minimum of the Past Century with Chandrayaan-2 XSM -- Elemental Abundances in the Quiescent Corona
Authors:
Santosh V. Vadawale,
Biswajit Mondal,
N. P. S. Mithun,
Aveek Sarkar,
P. Janardhan,
Bhuwan Joshi,
Anil Bhardwaj,
M. Shanmugam,
Arpit R. Patel,
Hitesh Kumar L. Adalja,
Shiv Kumar Goyal,
Tinkal Ladiya,
Neeraj Kumar Tiwari,
Nishant Singh,
Sushil Kumar
Abstract:
Elements with low First Ionization Potential (FIP) are known to be three to four times more abundant in active region loops of the solar corona than in the photosphere. There have been observations suggesting that this observed "FIP bias" may be different in other parts of the solar corona and such observations are thus important in understanding the underlying mechanism. The Solar X-ray Monitor (…
▽ More
Elements with low First Ionization Potential (FIP) are known to be three to four times more abundant in active region loops of the solar corona than in the photosphere. There have been observations suggesting that this observed "FIP bias" may be different in other parts of the solar corona and such observations are thus important in understanding the underlying mechanism. The Solar X-ray Monitor (XSM) on board the Chandrayaan-2 mission carried out spectroscopic observations of the Sun in soft X-rays during the 2019-20 solar minimum, considered to be the quietest solar minimum of the past century. These observations provided a unique opportunity to study soft X-ray spectra of the quiescent solar corona in the absence of any active regions. By modelling high resolution broadband X-ray spectra from XSM, we estimate the temperature and emission measure during periods of possibly the lowest solar X-ray intensity. We find that the derived parameters remain nearly constant over time with a temperature around 2 MK, suggesting the emission is dominated by X-ray Bright Points (XBPs). We also obtain the abundances of Mg, Al, and Si relative to H, and find that the FIP bias is ~2, lower than the values observed in active regions.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Sub-MeV spectroscopy with AstroSat-CZT Imager for Gamma Ray Bursts
Authors:
Tanmoy Chattopadhyay,
Soumya Gupta,
Vidushi Sharma,
Shabnam Iyyani,
Ajay Ratheesh,
N. P. S. Mithun,
E. Aarthy,
Sourav Palit,
Abhay Kumar,
Santosh V Vadawale,
A. R. Rao,
Varun Bhalerao,
Dipankar Bhattacharya
Abstract:
Cadmium Zinc Telluride Imager (CZTI) onboard AstroSat has been a prolific Gamma-Ray Burst (GRB) monitor. While the 2-pixel Compton scattered events (100 - 300 keV) are used to extract sensitive spectroscopic information, the inclusion of the low-gain pixels (around 20% of the detector plane) after careful calibration extends the energy range of Compton energy spectra to 600 keV. The new feature al…
▽ More
Cadmium Zinc Telluride Imager (CZTI) onboard AstroSat has been a prolific Gamma-Ray Burst (GRB) monitor. While the 2-pixel Compton scattered events (100 - 300 keV) are used to extract sensitive spectroscopic information, the inclusion of the low-gain pixels (around 20% of the detector plane) after careful calibration extends the energy range of Compton energy spectra to 600 keV. The new feature also allows single-pixel spectroscopy of the GRBs to the sub-MeV range which is otherwise limited to 150 keV. We also introduced a new noise rejection algorithm in the analysis ('Compton noise'). These new additions not only enhances the spectroscopic sensitivity of CZTI, but the sub-MeV spectroscopy will also allow proper characterization of the GRBs not detected by Fermi. This article describes the methodology of single, Compton event and veto spectroscopy in 100 - 600 keV for the GRBs detected in the first year of operation. CZTI in last five years has detected around 20 bright GRBs. The new methodologies, when applied on the spectral analysis for this large sample of GRBs, has the potential to improve the results significantly and help in better understanding the prompt emission mechanism.
△ Less
Submitted 26 February, 2021;
originally announced February 2021.
-
Exploring Sub-MeV Sensitivity of AstroSat-CZTI for ON-axis Bright Sources
Authors:
Abhay Kumar,
Tanmoy Chattopadhyay,
Santosh V Vadawale,
A. R. Rao,
Soumya Gupta,
Mithun N. P. S.,
Varun Bhalerao,
Dipankar Bhattacharya
Abstract:
The Cadmium Zinc Telluride Imager (CZTI) onboard AstroSat is designed for hard X-ray imaging and spectroscopy in the energy range of 20 - 100 keV. The CZT detectors are of 5 mm thickness and hence have good efficiency for Compton interactions beyond 100 keV. The polarisation analysis using CZTI relies on such Compton events and have been verified experimentally. The same Compton events can also be…
▽ More
The Cadmium Zinc Telluride Imager (CZTI) onboard AstroSat is designed for hard X-ray imaging and spectroscopy in the energy range of 20 - 100 keV. The CZT detectors are of 5 mm thickness and hence have good efficiency for Compton interactions beyond 100 keV. The polarisation analysis using CZTI relies on such Compton events and have been verified experimentally. The same Compton events can also be used to extend the spectroscopy up to 380 keV. Further, it has been observed that about 20% pixels of the CZTI detector plane have low gain, and they are excluded from the primary spectroscopy. If these pixels are included, then the spectroscopic capability of CZTI can be extended up to 500 keV and further up to 700 keV with a better gain calibration in the future. Here we explore the possibility of using the Compton events as well as the low gain pixels to extend the spectroscopic energy range of CZTI for ON-axis bright X-ray sources. We demonstrate this technique using Crab observations and explore its sensitivity.
△ Less
Submitted 26 February, 2021;
originally announced February 2021.
-
A generalized event selection algorithm for AstroSat CZT Imager data
Authors:
Ajay Ratheesh,
A. R. Rao,
N. P. S Mithun,
Santosh V. Vadawale,
Ajay Vibhute,
Dipankar Bhattacharya,
Priya Pradeep,
S. Sreekumar,
Varun Bhalerao
Abstract:
The Cadmium Zinc Telluride (CZT) Imager on board AstroSat is a hard X-ray imaging spectrometer operating in the energy range of 20 $-$ 100 keV. It also acts as an open hard X-ray monitor above 100 keV capable of detecting transient events like the Gamma-ray Bursts (GRBs). Additionally, the instrument has the sensitivity to measure hard X-ray polarization in the energy range of 100 $-$ 400 keV for…
▽ More
The Cadmium Zinc Telluride (CZT) Imager on board AstroSat is a hard X-ray imaging spectrometer operating in the energy range of 20 $-$ 100 keV. It also acts as an open hard X-ray monitor above 100 keV capable of detecting transient events like the Gamma-ray Bursts (GRBs). Additionally, the instrument has the sensitivity to measure hard X-ray polarization in the energy range of 100 $-$ 400 keV for bright on-axis sources like Crab and Cygnus X-1 and bright GRBs. As hard X-ray instruments like CZTI are sensitive to cosmic rays in addition to X-rays, it is required to identify and remove particle induced or other noise events and select events for scientific analysis of the data. The present CZTI data analysis pipeline includes algorithms for such event selection, but they have certain limitations. They were primarily designed for the analysis of data from persistent X-ray sources where the source flux is much less than the background and thus are not best suited for sources like GRBs. Here, we re-examine the characteristics of noise events in CZTI and present a generalized event selection method that caters to the analysis of data for all types of sources. The efficacy of the new method is reviewed by examining the Poissonian behavior of the selected events and the signal to noise ratio for GRBs.
△ Less
Submitted 26 February, 2021;
originally announced February 2021.
-
DarpanX: A Python Package for Modeling X-ray Reflectivity of Multilayer Mirrors
Authors:
Biswajit Mondal,
Santosh V. Vadawale,
N. P. S. Mithun,
C. S. Vaishnava,
Neeraj K. Tiwari,
S. K. Goyal,
Singam S. Panini,
Vinita Navalkar,
Chiranjit Karmakar,
Mansukhlal R. Patel,
R. B. Upadhyay
Abstract:
Multilayer X-ray mirrors consist of a coating of a large number of alternate layers of high Z and low Z materials with a typical thickness of 10-100 Angstrom, on a suitable substrate. Such coatings play an important role in enhancing the reflectivity of X-ray mirrors by allowing reflections at angles much larger than the critical angle of X-ray reflection for the given materials. Coating with an e…
▽ More
Multilayer X-ray mirrors consist of a coating of a large number of alternate layers of high Z and low Z materials with a typical thickness of 10-100 Angstrom, on a suitable substrate. Such coatings play an important role in enhancing the reflectivity of X-ray mirrors by allowing reflections at angles much larger than the critical angle of X-ray reflection for the given materials. Coating with an equal thickness of each bilayer enhances the reflectivity at discrete energies, satisfying Bragg condition. However, by systematically varying the bilayer thickness in the multilayer stack, it is possible to design X-ray mirrors having enhanced reflectivity over a broad energy range. One of the most important applications of such a depth graded multilayer mirror is to realize hard X-ray telescopes for astronomical purposes. Design of such multilayer X-ray mirrors and their characterization with X-ray reflectivity measurements require appropriate software tools. We have initiated the development of hard X-ray optics for future Indian X-ray astronomical missions, and in this context, we have developed a program, DarpanX, to calculate X-ray reflectivity for single and multilayer mirrors. It can be used as a stand-alone tool for designing multilayer mirrors with required characteristics. But more importantly, it has been implemented as a local model for the popular X-ray spectral fitting program, XSPEC, and thus can be used for accurate fitting of the experimentally measured X-ray reflectivity data. DarpanX is implemented as a Python 3 module, and an API is provided to access the underlying algorithms. Here we present details of DarpanX implementation and its validation for different type multilayer structures. We also demonstrate the model fitting capability of DarpanX for experimental X-ray reflectivity measurements of single and multilayer samples.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Multi-wavelength view of the galactic black-hole binary GRS 1716-249
Authors:
Sandeep K. Rout,
Santosh V. Vadawale,
Aarthy E.,
Shashikiran Ganesh,
Vishal Joshi,
Jayashree Roy,
Ranjeev Misra,
J. S. Yadav
Abstract:
The origins of X-ray and radio emissions during an X-ray binary outburst are comparatively better understood than those of ultraviolet, optical and infrared radiation. This is because multiple competing mechanisms peak in these mid-energy ranges. Ascertaining the true emission mechanism and segregating the contribution of different mechanisms, if present, is important for correct understanding of…
▽ More
The origins of X-ray and radio emissions during an X-ray binary outburst are comparatively better understood than those of ultraviolet, optical and infrared radiation. This is because multiple competing mechanisms peak in these mid-energy ranges. Ascertaining the true emission mechanism and segregating the contribution of different mechanisms, if present, is important for correct understanding of the energetics of the system and hence its geometry. We have studied the multi-wavelength spectral energy distribution of the galactic X-ray binary GRS 1716-249 ranging from near infrared (0.0005 keV) to hard X-rays (120 keV) using observations from AstroSat, Swift, and Mount Abu Infrared Observatory. Broadband spectral fitting suggests that the irradiated accretion disk dominates emission in ultraviolet and optical regimes. The near infrared emission exhibits some excess than the prediction of the irradiated disk model, which is most likely due to Synchrotron emission from jets as suggested by radio emission. Irradiation of the inner disk by the hard X-ray emission from the Corona also plays a significant role in accounting for the soft X-ray emission.
△ Less
Submitted 11 June, 2021; v1 submitted 23 December, 2020;
originally announced December 2020.
-
Solar X-ray Monitor On Board the Chandrayaan-2 Orbiter: In-flight Performance and Science Prospects
Authors:
N. P. S. Mithun,
Santosh V. Vadawale,
Aveek Sarkar,
M. Shanmugam,
Arpit R. Patel,
Biswajit Mondal,
Bhuwan Joshi,
Janardhan P.,
Hiteshkumar L. Adalja,
Shiv Kumar Goyal,
Tinkal Ladiya,
Neeraj Kumar Tiwari,
Nishant Singh,
Sushil Kumar,
Manoj K. Tiwari,
M. H. Modi,
Anil Bhardwaj
Abstract:
The Solar X-ray Monitor (abbreviated as XSM) on board India's Chandrayaan-2 mission is designed to carry out broadband spectroscopy of the Sun from lunar orbit. It observes the Sun as a star and measures the spectrum every second in the soft X-ray band of 1 - 15 keV with an energy resolution better than 180 eV at 5.9 keV. The primary objective of the XSM is to provide the incident solar spectrum f…
▽ More
The Solar X-ray Monitor (abbreviated as XSM) on board India's Chandrayaan-2 mission is designed to carry out broadband spectroscopy of the Sun from lunar orbit. It observes the Sun as a star and measures the spectrum every second in the soft X-ray band of 1 - 15 keV with an energy resolution better than 180 eV at 5.9 keV. The primary objective of the XSM is to provide the incident solar spectrum for the X-ray fluorescence spectroscopy experiment on the Chandrayaan-2 orbiter, which aims to generate elemental abundance maps of the lunar surface. However, observations with the XSM can independently be used to study the Sun as well. The Chandrayaan-2 mission was launched on 22 July 2019, and the XSM began nominal operations, in lunar orbit, from September 2019. The in-flight observations, so far, have shown that its spectral performance has been identical to that on the ground. Measurements of the effective area from ground calibration were found to require some refinement, which has been carried out using solar observations at different incident angles. It also has been shown that the XSM is sensitive enough to detect solar activity well below A-class. This makes the investigations of microflares and the quiet solar corona feasible in addition to the study of the evolution of physical parameters during intense flares. This article presents the in-flight performance and calibration of the XSM instrument and discusses some specific science cases that can be addressed using observations with the XSM.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Data Processing Software for Chandrayaan-2 Solar X-ray Monitor
Authors:
N. P. S. Mithun,
Santosh V. Vadawale,
Arpit R. Patel,
M. Shanmugam,
D. Chakrabarty,
Partha Konar,
Tejas N. Sarvaiya,
Girish D. Padia,
Aveek Sarkar,
Prashant Kumar,
Prashant Jangid,
Aaditya Sarda,
Manan S. Shah,
Anil Bhardwaj
Abstract:
Solar X-ray Monitor (XSM) instrument of India's Chandrayaan-2 lunar mission carries out broadband spectroscopy of the Sun in soft X-rays. XSM, with its unique features such as low background, high time cadence, and high spectral resolution, provides the opportunity to characterize transient and quiescent X-ray emission from the Sun even during low activity periods. It records the X-ray spectrum at…
▽ More
Solar X-ray Monitor (XSM) instrument of India's Chandrayaan-2 lunar mission carries out broadband spectroscopy of the Sun in soft X-rays. XSM, with its unique features such as low background, high time cadence, and high spectral resolution, provides the opportunity to characterize transient and quiescent X-ray emission from the Sun even during low activity periods. It records the X-ray spectrum at one-second cadence, and the data recorded on-board are downloaded at regular intervals along with that of other payloads. During ground pre-processing, the XSM data is segregated, and the level-0 data is made available for higher levels of processing at the Payload Operations Center (POC). XSM Data Analysis Software (XSMDAS) is developed to carry out the processing of the level-0 data to higher levels and to generate calibrated light curves and spectra for user-defined binning parameters such that it is suitable for further scientific analysis. A front-end for the XSMDAS named XSM Quick Look Display (XSMQLD) is also developed to facilitate a first look at the data without applying calibration. XSM Data Management-Monitoring System (XSMDMS) is designed to carry out automated data processing at the POC and to maintain an SQLite database with relevant information on the data sets and an internal web application for monitoring data quality and instrument health. All XSM raw and calibrated data products are in FITS format, organized into day-wise files, and the data archive follows Planetary Data System-4 (PDS4) standards. The XSM data will be made available after a lock-in period along with the XSM Data Analysis Software from ISRO Science Data Archive (ISDA) at Indian Space Science Data Center(ISSDC). Here we discuss the design and implementation of all components of the software for the XSM data processing and the contents of the XSM data archive.
△ Less
Submitted 22 July, 2020;
originally announced July 2020.
-
Ground Calibration of Solar X-ray Monitor On-board Chandrayaan-2 Orbiter
Authors:
N. P. S. Mithun,
Santosh V. Vadawale,
M. Shanmugam,
Arpit R. Patel,
Neeraj Kumar Tiwari,
Hiteshkumar L. Adalja,
Shiv Kumar Goyal,
Tinkal Ladiya,
Nishant Singh,
Sushil Kumar,
Manoj K. Tiwari,
M. H. Modi,
Biswajit Mondal,
Aveek Sarkar,
Bhuwan Joshi,
P. Janardhan,
Anil Bhardwaj
Abstract:
Chandrayaan-2, the second Indian mission to the Moon, carries a spectrometer called the Solar X-ray Monitor (XSM) to perform soft X-ray spectral measurements of the Sun while a companion payload measures the fluorescence emission from the Moon. Together these two payloads will provide quantitative estimates of elemental abundances on the lunar surface. XSM is also expected to provide significant c…
▽ More
Chandrayaan-2, the second Indian mission to the Moon, carries a spectrometer called the Solar X-ray Monitor (XSM) to perform soft X-ray spectral measurements of the Sun while a companion payload measures the fluorescence emission from the Moon. Together these two payloads will provide quantitative estimates of elemental abundances on the lunar surface. XSM is also expected to provide significant contributions to the solar X-ray studies with its highest time cadence and energy resolution spectral measurements. For this purpose, the XSM employs a Silicon Drift Detector and carries out energy measurements of incident photons in the 1 -- 15 keV range with a resolution of less than 180 eV at 5.9 keV, over a wide range of solar X-ray intensities. Extensive ground calibration experiments have been carried out with the XSM using laboratory X-ray sources as well as X-ray beam-line facilities to determine the instrument response matrix parameters required for quantitative spectral analysis. This includes measurements of gain, spectral redistribution function, and effective area, under various observing conditions. The capability of the XSM to maintain its spectral performance at high incident flux as well as the dead-time and pile-up characteristics have also been investigated. The results of these ground calibration experiments of the XSM payload are presented in this article.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
-
Spectro-polarimetric analysis of prompt emission of GRB 160325A: jet with evolving environment of internal shocks
Authors:
Vidushi Sharma,
Shabnam Iyyani,
Dipankar Bhattacharya,
Tanmoy Chattopadhyay,
Santosh V. Vadawale,
Varun. B. Bhalerao
Abstract:
GRB 160325A is the only bright burst detected by AstroSat CZT Imager in its primary field of view to date. In this work, we present the spectral and polarimetric analysis of the prompt emission of the burst using AstroSat, Fermi and Niel Gehrels Swift observations. The prompt emission consists of two distinct emission episodes separated by a few seconds of quiescent/ mild activity period. The firs…
▽ More
GRB 160325A is the only bright burst detected by AstroSat CZT Imager in its primary field of view to date. In this work, we present the spectral and polarimetric analysis of the prompt emission of the burst using AstroSat, Fermi and Niel Gehrels Swift observations. The prompt emission consists of two distinct emission episodes separated by a few seconds of quiescent/ mild activity period. The first emission episode shows a thermal component as well as a low polarisation fraction of $PF < 37\, \%$ at $1.5\, σ$ confidence level. On the other hand, the second emission episode shows a non-thermal spectrum and is found to be highly polarised with $PF > 43\, \%$ at $1.5 σ$ confidence level. We also study the afterglow properties of the jet using {\it Swift}/XRT data. The observed jet break suggests that the jet is pointed towards the observer and has an opening angle of $1.2^{\circ}$ for an assumed redshift, $z = 2$. With composite modelling of polarisation, spectrum of the prompt emission and the afterglow, we infer that the first episode of emission originates from the photosphere with localised dissipation happening below it, and the second from the optically thin region above the photosphere. The photospheric emission is generated mainly by inverse Compton scattering, whereas the emission in the optically thin region is produced by the synchrotron process. The low radiation efficiency of the burst suggests that the outflow remains baryonic dominated throughout the burst duration with only a subdominant Poynting flux component, and the kinetic energy of the jet is likely dissipated via internal shocks which evolves from an optically thick to optically thin environment within the jet.
△ Less
Submitted 4 March, 2020;
originally announced March 2020.
-
Characterisation of Cosmic Ray Induced Noise Events in AstroSat-CZT Imager
Authors:
Debdutta Paul,
A. R. Rao,
Ajay Ratheesh,
N. P. S. Mithun,
S. V. Vadawale,
Ajay Vibhute,
Dipankar Bhattacharya,
Priya Pradeep,
S. Sreekumar
Abstract:
The Cadmium Zinc Telluride (CZT) Imager onboard AstroSat, consists of pixelated CZT detectors, which are sensitive to hard X-rays above 20 keV. The individual pixels are triggered by ionising events occurring in them, and the detectors operate in a self-triggered mode, recording each event separately with information about its time of incidence, detector co-ordinates, and channel that scales with…
▽ More
The Cadmium Zinc Telluride (CZT) Imager onboard AstroSat, consists of pixelated CZT detectors, which are sensitive to hard X-rays above 20 keV. The individual pixels are triggered by ionising events occurring in them, and the detectors operate in a self-triggered mode, recording each event separately with information about its time of incidence, detector co-ordinates, and channel that scales with the amount of ionisation. The detectors are sensitive not only to photons from astrophysical sources of interest, but also prone to a number of other events like background X-rays, cosmic rays, and noise in detectors or the electronics. In this work a detailed analysis of the effect of cosmic rays on the detectors is made and it is found that cosmic rays can trigger multiple events which are closely packed in time (called 'bunches'). Higher energy cosmic rays, however, can also generate delayed emissions, a signature previously seen in the PICsIT detector on-board INTEGRAL. An algorithm to automatically detect them based on their spatial clustering properties is presented. Residual noise events are examined using examples of Gamma Ray Bursts as target sources.
△ Less
Submitted 12 April, 2021; v1 submitted 7 December, 2019;
originally announced December 2019.
-
Alpha Particle X-Ray Spectrometer (APXS) On-board Chandrayaan-2 Rover -- Pragyan
Authors:
M. Shanmugam,
S. V. Vadawale,
Arpit R. Patel,
N. P. S. Mithun,
Hitesh Kumar Adalaja,
Tinkal Ladiya,
Shiv Kumar Goyal,
Neeraj K. Tiwari,
Nishant Singh,
Sushil Kumar,
Deepak Kumar Painkra,
A. K. Hait,
A. Patinge,
Abhishek Kumar,
Saleem Basha,
Vivek R. Subramanian,
R. G. Venkatesh,
D. B. Prashant,
Sonal Navle,
Y. B. Acharya,
S. V. S. Murty,
Anil Bhardwaj
Abstract:
Alpha Particle X-ray Spectrometer (APXS) is one of the two scientific experiments on Chandrayaan-2 rover named as Pragyan. The primary scientific objective of APXS is to determine the elemental composition of the lunar surface in the surrounding regions of the landing site. This will be achieved by employing the technique of X-ray fluorescence spectroscopy using in-situ excitation source Cm-244 em…
▽ More
Alpha Particle X-ray Spectrometer (APXS) is one of the two scientific experiments on Chandrayaan-2 rover named as Pragyan. The primary scientific objective of APXS is to determine the elemental composition of the lunar surface in the surrounding regions of the landing site. This will be achieved by employing the technique of X-ray fluorescence spectroscopy using in-situ excitation source Cm-244 emitting both X-rays and alpha particles. These radiations excite characteristic X-rays of the elements by the processes of particle induced X-ray emission (PIXE) and X-ray fluorescence (XRF). The characteristic X-rays are detected by the state-of-the-art X-ray detector known as Silicon Drift Detector (SDD), which provides high energy resolution as well as high efficiency in the energy range of 1 to 25 keV. This enables APXS to detect all major rock forming elements such as, Na, Mg, Al, Si, Ca, Ti and Fe. The Flight Model (FM) of the APXS payload has been completed and tested for various instrument parameters. The APXS provides energy resolution of 135 eV at 5.9 keV for the detector operating temperature of about -35 deg C. The design details and the performance measurement of APXS are presented in this paper.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Solar X-ray Monitor (XSM) On-board Chandrayaan-2 Orbiter
Authors:
M. Shanmugam,
S. V. Vadawale,
Arpit R. Patel,
Hitesh Kumar Adalaja,
N. P. S. Mithun,
Tinkal Ladiya,
Shiv Kumar Goyal,
Neeraj K. Tiwari,
Nishant Singh,
Sushil Kumar,
Deepak Kumar Painkra,
Y. B. Acharya,
Anil Bhardwaj,
A. K. Hait,
A. Patinge,
Abinandhan Kapoor,
H. N. Suresh Kumar,
Neeraj Satya,
Gaurav Saxena,
Kalpana Arvind
Abstract:
Solar X-ray Monitor (XSM) is one of the scientific instruments on-board Chandrayaan-2 orbiter. The XSM along with instrument CLASS (Chandras Large Area Soft x-ray Spectrometer) comprise the remote X-ray fluorescence spectroscopy experiment of Chandrayaan-2 mission with an objective to determine the elemental composition of the lunar surface on a global scale. XSM instrument will measure the solar…
▽ More
Solar X-ray Monitor (XSM) is one of the scientific instruments on-board Chandrayaan-2 orbiter. The XSM along with instrument CLASS (Chandras Large Area Soft x-ray Spectrometer) comprise the remote X-ray fluorescence spectroscopy experiment of Chandrayaan-2 mission with an objective to determine the elemental composition of the lunar surface on a global scale. XSM instrument will measure the solar X-rays in the energy range of 1-15 keV using state-of-the-art Silicon Drift Detector (SDD). The Flight Model (FM) of the XSM payload has been designed, realized and characterized for various operating parameters. XSM provides energy resolution of 180 eV at 5.9 keV with high time cadence of one second. The X-ray spectra of the Sun observed with XSM will also contribute to the study of solar corona. The detailed description and the performance characteristics of the XSM instrument are presented in this paper.
△ Less
Submitted 21 October, 2019;
originally announced October 2019.
-
Time varying polarized gamma-rays from GRB 160821A: evidence for ordered magnetic fields
Authors:
Vidushi Sharma,
Shabnam Iyyani,
Dipankar Bhattacharya,
Tanmoy Chattopadhyay,
A. R. Rao,
E. Aarthy,
Santosh V. Vadawale,
N. P. S. Mithun,
Varun. B. Bhalerao,
Felix Ryde,
Asaf Peer
Abstract:
GRB 160821A is the third most energetic gamma ray burst observed by the {\it Fermi} gamma-ray space telescope. Based on the observations made by Cadmium Zinc Telluride Imager (CZTI) on board {\it AstroSat}, here we report the most conclusive evidence to date of (i) high linear polarization ($66^{+26}_{-27} \%$; $5.3 σ$ detection), and (ii) variation of its polarization angle with time happening tw…
▽ More
GRB 160821A is the third most energetic gamma ray burst observed by the {\it Fermi} gamma-ray space telescope. Based on the observations made by Cadmium Zinc Telluride Imager (CZTI) on board {\it AstroSat}, here we report the most conclusive evidence to date of (i) high linear polarization ($66^{+26}_{-27} \%$; $5.3 σ$ detection), and (ii) variation of its polarization angle with time happening twice during the rise and decay phase of the burst at $3.5 σ$ and $3.1 σ$ detections respectively. All confidence levels are reported for two parameters of interest. These observations strongly suggest synchrotron radiation produced in magnetic field lines which are highly ordered on angular scales of $1/Γ$, where $Γ$ is the Lorentz factor of the outflow.
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
NICSPol: A Near Infrared polarimeter for the 1.2 m telescope at Mount Abu Infrared Observatory
Authors:
Esakkiappan Aarthy,
Archita Rai,
Shashikiran Ganesh,
Santosh V. Vadawale
Abstract:
NICSPol is a near infrared imaging polarimeter developed for the Near Infrared Camera and Spectrograph (NICS), one of the back end instruments of the 1.2 m Cassegrain telescope at the Mount Abu Infrared Observatory (MIRO), India. The polarimeter consists of a rotating wire grid polarizer which is mounted between the telescope optics and NICS. The polarimetric observations are carried out by rotati…
▽ More
NICSPol is a near infrared imaging polarimeter developed for the Near Infrared Camera and Spectrograph (NICS), one of the back end instruments of the 1.2 m Cassegrain telescope at the Mount Abu Infrared Observatory (MIRO), India. The polarimeter consists of a rotating wire grid polarizer which is mounted between the telescope optics and NICS. The polarimetric observations are carried out by rotating the polarizer using a motorized mechanism to determine the Stokes parameters, which are then converted into the polarization fraction and polarization angle. Here we report the details of the instrument and the results of observations of IR polarimetric standards. A set of polarized and unpolarized standards were observed using NICSPol over J, H and Ks bands covering 0.8 to 2.5 micro m. The observations of polarized standards using NICSPol show that, NICSPol can constrain polarization within ~1% for sources brighter than ~16 magnitude in JHKs bands. NICSPol is a general purpose instrument which could be used to study variety of astrophysical sources such as AGNs, Pulsars, XRBs, Supernovae, star forming regions etc. With few NIR polarimeters available world-wide so far, NICSPol would be the first imaging NIR polarimeter in India.
△ Less
Submitted 23 July, 2019;
originally announced July 2019.
-
AstroSat and Chandra view of the high soft state of 4U 1630-47 (4U 1630-472): evidence of the disk wind and a rapidly spinning black hole
Authors:
Mayukh Pahari,
Sudip Bhattacharyya,
A R Rao,
Dipankar Bhattacharya,
Santosh V Vadawale,
Gulab C Dewangan,
I M McHardy,
Poshak Gandhi,
S Corbel,
Norbert S Schulz,
Diego Altamirano
Abstract:
We present the X-ray spectral and timing analysis of the transient black hole X-ray binary 4U 1630-47, observed with the AstroSat, Chandra and MAXI space missions during its soft X-ray outburst in 2016. The outburst, from the rising phase until the peak, is neither detected in hard X-rays (15-50 keV) by the Swift/BAT nor in radio. Such non-detection along with the source behavior in the hardness-i…
▽ More
We present the X-ray spectral and timing analysis of the transient black hole X-ray binary 4U 1630-47, observed with the AstroSat, Chandra and MAXI space missions during its soft X-ray outburst in 2016. The outburst, from the rising phase until the peak, is neither detected in hard X-rays (15-50 keV) by the Swift/BAT nor in radio. Such non-detection along with the source behavior in the hardness-intensity and color-color diagrams obtained using MAXI data confirm that both Chandra and AstroSat observations were performed during the high soft spectral state. The High Energy Grating (HEG) spectrum from the Chandra high-energy transmission grating spectrometer (HETGS) shows two strong, moderately blueshifted absorption lines at 6.705$_{-0.002}^{+0.002}$ keV and 6.974$_{-0.003}^{+0.004}$ keV, which are produced by Fe XXV and Fe XXVI in a low-velocity ionized disk wind. The corresponding outflow velocity is determined to be 366$\pm$56 km/s. Separate spectral fits of Chandra/HEG, AstroSat/SXT+LAXPC and Chandra/HEG + AstroSat/SXT+LAXPC data show that the broadband continuum can be well described with a relativistic disk-blackbody model, with the disk flux fraction of $\sim 0.97$. Based on the best-fit continuum spectral modeling of Chandra, AstroSat and Chandra+AstroSat joint spectra and using the Markov Chain Monte Carlo simulations, we constrain the spectral hardening factor at 1.56$^{+0.14}_{-0.06}$ and the dimensionless black hole spin parameter at 0.92 $\pm$ 0.04 within the 99.7% confidence interval. Our conclusion of a rapidly-spinning black hole in 4U 1630-47 using the continuum spectrum method is in agreement with a previous finding applying the reflection spectral fitting method.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
AstroSat-CZTI detection of variable prompt emission polarization in GRB 171010A
Authors:
Vikas Chand,
Tanmoy Chattopadhyay,
Gor Oganesyan,
A. R. Rao,
Santosh V. Vadawale,
Dipankar Bhattacharya,
V. B. Bhalerao,
Kuntal Misra
Abstract:
We present spectro-polarimetric analysis of \thisgrb\ using data from \asat, \fermi, and \swift, to provide insights into the physical mechanisms of the prompt radiation and the jet geometry.
Prompt emission from \thisgrb\ was very bright (fluence $>10^{-4}$~ergs~cm$^{-2}$) and had a complex structure composed of the superimposition of several pulses. The energy spectra deviate from the typical…
▽ More
We present spectro-polarimetric analysis of \thisgrb\ using data from \asat, \fermi, and \swift, to provide insights into the physical mechanisms of the prompt radiation and the jet geometry.
Prompt emission from \thisgrb\ was very bright (fluence $>10^{-4}$~ergs~cm$^{-2}$) and had a complex structure composed of the superimposition of several pulses. The energy spectra deviate from the typical Band function to show a low energy peak $\sim 15$~keV --- which we interpret as a power-law with two breaks, with a synchrotron origin. Alternately, the prompt spectra can also be interpreted as Comptonized emission, or a blackbody combined with a Band function. Time-resolved analysis confirms the presence of the low energy component, while the peak energy is found to be confined in the range of 100--200~keV.
Afterglow emission detected by \fermi-LAT is typical of an external shock model, and we constrain the initial Lorentz factor using the peak time of the emission. \swift-XRT measurements of the afterglow show an indication for a jet break, allowing us to constrain the jet opening angle to $>$ 6$\degr$.
Detection of a large number of Compton scattered events by \asat-CZTI provides an opportunity to study hard X-ray polarization of the prompt emission. We find that the burst has high, time-variable polarization, with the emission {\bf have higher polarization} at energies above the peak energy.
We discuss all observations in the context of GRB models and polarization arising due to {\bf due to physical or geometric effects:} synchrotron emission from multiple shocks with ordered or random magnetic fields, Poynting flux dominated jet undergoing abrupt magnetic dissipation, sub-photospheric dissipation, a jet consisting of fragmented fireballs, and the Comptonization model.
△ Less
Submitted 24 February, 2019; v1 submitted 4 July, 2018;
originally announced July 2018.
-
Violation of synchrotron line of death by the highly polarized $GRB~160802A$
Authors:
Vikas Chand,
Tanmoy Chattopadhyay,
S. Iyyani,
Rupal Basak,
Aarthy,
E.,
A. R. Rao,
Santosh V. Vadawale,
Dipankar Bhattacharya,
V. B. Bhalerao
Abstract:
$GRB~160802A$ is one of the brightest gamma-ray bursts (GRBs) observed with $Fermi$ Gamma-ray Burst Monitor (GBM) in the energy range of $10~-~1000$ keV, while at the same time it is surprisingly faint at energies $\gtrsim2$ MeV. An observation with $AstroSat…
▽ More
$GRB~160802A$ is one of the brightest gamma-ray bursts (GRBs) observed with $Fermi$ Gamma-ray Burst Monitor (GBM) in the energy range of $10~-~1000$ keV, while at the same time it is surprisingly faint at energies $\gtrsim2$ MeV. An observation with $AstroSat$/CZT Imager (CZTI) also provides the polarisation which helps in constraining different prompt emission models using the novel joint spectra-polarimetric data. We analyze the $Fermi$/GBM data, and find two main bursting episodes that are clearly separated in time, one particularly faint in higher energies and having certain differences in their spectra. The spectrum in general shows a hard-to-soft evolution in both the episodes. Only the later part of the first episode shows intensity tracking behaviour corresponding to multiple pulses. The photon index of the spectrum is hard, and in over 90 per cent cases, cross even the slow cooling limit ($α=-2/3$) of an optically thin synchrotron shock model (SSM). Though such hard values are generally associated with a sub-dominant thermal emission, such a component is not statistically required in our analysis. In addition, the measured polarisation in 100--300\,keV is too high, $π=85\pm29\%$, to be accommodated in such a scenario. Jitter radiation, which allows a much harder index up to $α=+0.5$, in principle can produce high polarisation but only beyond the spectral peak, which in our case lies close to $200~-~300$ keV during the time when most of the polarisation signal is obtained. The spectro-polarimetric data seems to be consistent with a subphotospheric dissipation process occurring within a narrow jet with a sharp drop in emissivity beyond the jet edge, and viewed along its boundary.
△ Less
Submitted 18 June, 2018;
originally announced June 2018.
-
Cadmium Zinc Telluride Imager onboard AstroSat : a multi-faceted hard X-ray instrument
Authors:
A. R. Rao,
D. Bhattacharya,
V. B. Bhalerao,
S. V. Vadawale,
S. Sreekumar
Abstract:
The AstroSat satellite is designed to make multi-waveband observations of astronomical sources and the Cadmium Zinc Telluride Imager (CZTI) instrument of AstroSat covers the hard X-ray band. CZTI has a large area position sensitive hard X-ray detector equipped with a Coded Aperture Mask, thus enabling simultaneous background measurement. Ability to record simultaneous detection of ionizing interac…
▽ More
The AstroSat satellite is designed to make multi-waveband observations of astronomical sources and the Cadmium Zinc Telluride Imager (CZTI) instrument of AstroSat covers the hard X-ray band. CZTI has a large area position sensitive hard X-ray detector equipped with a Coded Aperture Mask, thus enabling simultaneous background measurement. Ability to record simultaneous detection of ionizing interactions in multiple detector elements is a special feature of the instrument and this is exploited to provide polarization information in the 100 - 380 keV region. CZTI provides sensitive spectroscopic measurements in the 20 - 100 keV region, and acts as an all sky hard X-ray monitor and polarimeter above 100 keV. During the first year of operation, CZTI has recorded several gamma-ray bursts, measured the phase resolved hard X-ray polarization of the Crab pulsar, and the hard X-ray spectra of many bright Galactic X-ray binaries. The excellent timing capability of the instrument has been demonstrated with simultaneous observation of the Crab pulsar with radio telescopes like GMRT and Ooty radio telescope.
△ Less
Submitted 30 October, 2017;
originally announced October 2017.
-
Design & development of position sensitive detector for hard X-ray using SiPM and new generation scintillators
Authors:
S. K. Goyal,
Amisha P. Naik,
Mithun N. P. S.,
S. V. Vadawale,
Neeraj K. Tiwari,
T. Chattopadhyay,
N. Nagrani,
S. Madhavi,
T. ladiya,
A. R. Patel,
M. Shanmugam,
H. L. Adalja,
V. R. patel,
G. P. Ubale
Abstract:
There is growing interest in high-energy astrophysics community for the development of sensitive instruments in the hard X-ray energy extending to few hundred keV. This requires position sensitive detector modules with high efficiency in the hard X-ray energy range. Here, we present development of a detector module, which consists of 25 mm x 25 mm CeBr3 scintillation detector, read out by a custom…
▽ More
There is growing interest in high-energy astrophysics community for the development of sensitive instruments in the hard X-ray energy extending to few hundred keV. This requires position sensitive detector modules with high efficiency in the hard X-ray energy range. Here, we present development of a detector module, which consists of 25 mm x 25 mm CeBr3 scintillation detector, read out by a custom designed two dimensional array of Silicon Photo-Multipliers (SiPM). Readout of common cathode of SiPMs provides the spectral measurement whereas the readout of individual SiPM anodes provides measurement of interaction position in the crystal. Preliminary results for spectral and position measurements with the detector module are presented here.
△ Less
Submitted 19 October, 2017;
originally announced October 2017.
-
A precise measurement of the orbital period parameters of Cygnus X-3
Authors:
Yash Bhargava,
A. R. Rao,
K. P. Singh,
Manojendu Choudhury,
S. Bhattacharyya,
S. Chandra,
G. C. Dewangan,
K. Mukerjee,
G. C. Stewart,
D. Bhattacharya,
N. P. S. Mithun,
S. V. Vadawale
Abstract:
We present X-ray light curves of Cygnus X-3 as measured by the recently launched AstroSat satellite. The light curve folded over the binary period of 4.8 hours shows a remarkable stability over the past 45 years and we find that we can use this information to measure the zero point to better than 100 s. We revisit the historical binary phase measurements and examine the stability of the binary per…
▽ More
We present X-ray light curves of Cygnus X-3 as measured by the recently launched AstroSat satellite. The light curve folded over the binary period of 4.8 hours shows a remarkable stability over the past 45 years and we find that we can use this information to measure the zero point to better than 100 s. We revisit the historical binary phase measurements and examine the stability of the binary period over 45 years. We present a new binary ephemeris with the period and period derivative determined to an accuracy much better than previously reported. We do not find any evidence for a second derivative in the period variation. The precise binary period measurements, however, indicate a hint of short term episodic variations in periods. Interestingly, these short term period variations coincide with the period of enhanced jet activity exhibited by the source. We discuss the implications of these observations on the nature of the binary system.
△ Less
Submitted 25 November, 2017; v1 submitted 21 September, 2017;
originally announced September 2017.
-
Surprise in simplicity: an unusual spectral evolution of a single pulse GRB 151006A
Authors:
R. Basak,
S. Iyyani,
V. Chand,
T. Chattopadhyay,
D. Bhattacharya,
A. R. Rao,
S. V. Vadawale
Abstract:
We present a detailed analysis of GRB 151006A, the first GRB detected by Astrosat CZT Imager (CZTI). We study the long term spectral evolution by exploiting the capabilities of \emph{Fermi} and \emph{Swift} satellites at different phases, which is complemented by the polarization measurement with the CZTI. While the light curve of the GRB in different energy bands show a simple pulse profile, the…
▽ More
We present a detailed analysis of GRB 151006A, the first GRB detected by Astrosat CZT Imager (CZTI). We study the long term spectral evolution by exploiting the capabilities of \emph{Fermi} and \emph{Swift} satellites at different phases, which is complemented by the polarization measurement with the CZTI. While the light curve of the GRB in different energy bands show a simple pulse profile, the spectrum shows an unusual evolution. The first phase exhibits a hard-to-soft (HTS) evolution until $\sim16-20$\,s, followed by a sudden increase in the spectral peak reaching a few MeV. Such a dramatic change in the spectral evolution in case of a single pulse burst is reported for the first time. This is captured by all models we used namely, Band function, Blackbody+Band and two blackbodies+power law. Interestingly, the \emph{Fermi} Large Area Telescope (LAT) also detects its first photon ($>100$\,MeV) during this time. This new injection of energy may be associated with either the beginning of afterglow phase, or a second hard pulse of the prompt emission itself which, however, is not seen in the otherwise smooth pulse profile. By constructing Bayesian blocks and studying the hardness evolution we find a good evidence for a second hard pulse. The \emph{Swift} data at late epochs ($>T_{90}$ of the GRB) also shows a significant spectral evolution consistent with the early second phase. The CZTI data (100--350\,keV), though having low significance ($1σ$), show high values of polarization in the two epochs ($77\%$ to $94\%$), in agreement with our interpretation.
△ Less
Submitted 31 July, 2017;
originally announced July 2017.
-
Prompt emission polarimetry of Gamma Ray Bursts with ASTROSAT CZT-Imager
Authors:
Tanmoy Chattopadhyay,
Santosh V. Vadawale,
E. Aarthy,
N. P. S. Mithun,
Vikas Chand,
Ajay Ratheesh,
Rupal Basak,
A. R. Rao,
Varun Bhalerao,
Sujay Mate,
Arvind B.,
Vidushi Sharma,
Dipankar Bhattacharya
Abstract:
X-ray and Gamma-ray polarization measurements of the prompt emission of Gamma-ray bursts (GRBs) are believed to be extremely important for testing various models of GRBs. So far, the available measurements of hard X-ray polarization of GRB prompt emission have not significantly constrained the GRB models, particularly because of the difficulty of measuring polarization in these bands. The CZT Imag…
▽ More
X-ray and Gamma-ray polarization measurements of the prompt emission of Gamma-ray bursts (GRBs) are believed to be extremely important for testing various models of GRBs. So far, the available measurements of hard X-ray polarization of GRB prompt emission have not significantly constrained the GRB models, particularly because of the difficulty of measuring polarization in these bands. The CZT Imager (CZTI) onboard {\em AstroSat} is primarily an X-ray spectroscopic instrument that also works as a wide angle GRB monitor due to the transparency of its support structure above 100 keV. It also has experimentally verified polarization measurement capability in the 100 $-$ 300 keV energy range and thus provides a unique opportunity to attempt spectro-polarimetric studies of GRBs. Here we present the polarization data for the brightest 11 GRBs detected by CZTI during its first year of operation. Among these, 5 GRBs show polarization signatures with $\gtrapprox$3$σ$, and 1 GRB shows $\>$2$σ$ detection significance. We place upper limits for the remaining 5 GRBs. We provide details of the various tests performed to validate our polarization measurements. While it is difficult yet to discriminate between various emission models with the current sample alone, the large number of polarization measurements CZTI expects to gather in its minimum lifetime of five years should help to significantly improve our understanding of the prompt emission.
△ Less
Submitted 10 September, 2019; v1 submitted 20 July, 2017;
originally announced July 2017.
-
A tale of two transients: GW170104 and GRB170105A
Authors:
V. Bhalerao,
M. M. Kasliwal,
D. Bhattacharya,
A. Corsi,
E. Aarthy,
S. M. Adams,
N. Blagorodnova,
T. Cantwell,
S. B. Cenko,
R. Fender,
D. Frail,
R. Itoh,
J. Jencson,
N. Kawai,
A. K. H. Kong,
T. Kupfer,
A. Kutyrev,
J. Mao,
S. Mate,
N. P. S. Mithun,
K. Mooley,
D. A. Perley,
Y. C. Perrott,
R. M. Quimby,
A. R. Rao
, et al. (8 additional authors not shown)
Abstract:
We present multi-wavelength follow-up campaigns by the AstroSat-CZTI and GROWTH collaborations to search for an electromagnetic counterpart to the gravitational wave event GW170104. At the time of the GW170104 trigger, the AstroSat CZTI field-of-view covered 50.3\% of the sky localization. We do not detect any hard X-ray (>100 keV) signal at this time, and place an upper limit of…
▽ More
We present multi-wavelength follow-up campaigns by the AstroSat-CZTI and GROWTH collaborations to search for an electromagnetic counterpart to the gravitational wave event GW170104. At the time of the GW170104 trigger, the AstroSat CZTI field-of-view covered 50.3\% of the sky localization. We do not detect any hard X-ray (>100 keV) signal at this time, and place an upper limit of $\approx 4.5 \times 10^{-7}~{\rm erg~cm}^{-2}{\rm~s}^{-1}$ for a 1\,s timescale. Separately, the ATLAS survey reported a rapidly fading optical source dubbed ATLAS17aeu in the error circle of GW170104. Our panchromatic investigation of ATLAS17aeu shows that it is the afterglow of an unrelated long, soft GRB~170105A, with only a fortuitous spatial coincidence with GW170104. We then discuss the properties of this transient in the context of standard long GRB afterglow models.
△ Less
Submitted 21 July, 2017; v1 submitted 31 May, 2017;
originally announced June 2017.
-
In-orbit performance of AstroSat CZTI
Authors:
Santosh V. Vadawale,
A. R. Rao,
Dipankar Bhattacharya,
Varun B. Bhalerao,
Gulab Chand Dewangan,
Ajay M. Vibute,
Mithun N. P. S.,
Tanmoy Chattopadhyay,
S. Sreekumar
Abstract:
Cadmium-Zinc-Telluride Imager (CZTI) is one of the five payloads on-board recently launched Indian astronomy satellite AstroSat. CZTI is primarily designed for simultaneous hard X-ray imaging and spectroscopy of celestial X-ray sources. It employs the technique of coded mask imaging for measuring spectra in the energy range of 20 - 150 keV. It was the first scientific payload of AstroSat to be swi…
▽ More
Cadmium-Zinc-Telluride Imager (CZTI) is one of the five payloads on-board recently launched Indian astronomy satellite AstroSat. CZTI is primarily designed for simultaneous hard X-ray imaging and spectroscopy of celestial X-ray sources. It employs the technique of coded mask imaging for measuring spectra in the energy range of 20 - 150 keV. It was the first scientific payload of AstroSat to be switched on after one week of the launch and was made operational during the subsequent week. Here we present preliminary results from the performance verification phase observations and discuss the in-orbit performance of CZTI.
△ Less
Submitted 2 September, 2016;
originally announced September 2016.
-
AstroSat CZT Imager observations of GRB 151006A: timing, spectroscopy, and polarisation study
Authors:
A. R. Rao,
Vikas Chand,
M. K. Hingar,
S. Iyyani,
Rakesh Khanna,
A. P. K. Kutty,
J. P. Malkar,
D. Paul,
V. B. Bhalerao,
D. Bhattacharya,
G. C. Dewangan,
Pramod Pawar,
A. M. Vibhute,
T. Chattopadhyay,
N. P. S. Mithun,
S. V. Vadawale,
N. Vagshette,
R. Basak,
P. Pradeep,
Essy Samuel,
S. Sreekumar,
P. Vinod,
K. H. Navalgund,
R. Pandiyan,
K. S. Sarma
, et al. (2 additional authors not shown)
Abstract:
AstroSat is a multi-wavelength satellite launched on 2015 September 28. The CZT Imager of AstroSat on its very first day of operation detected a long duration gamma-ray burst (GRB) namely GRB 151006A. Using the off-axis imaging and spectral response of the instrument, we demonstrate that CZT Imager can localise this GRB correct to about a few degrees and it can provide, in conjunction with Swift,…
▽ More
AstroSat is a multi-wavelength satellite launched on 2015 September 28. The CZT Imager of AstroSat on its very first day of operation detected a long duration gamma-ray burst (GRB) namely GRB 151006A. Using the off-axis imaging and spectral response of the instrument, we demonstrate that CZT Imager can localise this GRB correct to about a few degrees and it can provide, in conjunction with Swift, spectral parameters similar to that obtained from Fermi/GBM. Hence CZT Imager would be a useful addition to the currently operating GRB instruments (Swift and Fermi). Specifically, we argue that the CZT Imager will be most useful for the short hard GRBs by providing localisation for those detected by Fermi and spectral information for those detected only by Swift. We also provide preliminary results on a new exciting capability of this instrument: CZT Imager is able to identify Compton scattered events thereby providing polarisation information for bright GRBs. GRB 151006A, in spite of being relatively faint, shows hints of a polarisation signal at 100-300 keV (though at a low significance level). We point out that CZT Imager should provide significant time resolved polarisation measurements for GRBs that have fluence 3 times higher than that of GRB 151006A. We estimate that the number of such bright GRBs detectable by CZT Imager is 5 - 6 per year. CZT Imager can also act as a good hard X-ray monitoring device for possible electromagnetic counterparts of Gravitational Wave events.
△ Less
Submitted 26 August, 2016;
originally announced August 2016.
-
Charged Particle Monitor on the AstroSat mission
Authors:
A. R. Rao,
M. H. Patil,
Yash Bhargava,
Rakesh Khanna,
M. K. Hingar,
A. P. K. Kutty,
J. P. Malkar,
Rupal Basak,
S. Sreekumar,
Essy Samuel,
P. Priya,
P. Vinod,
D. Bhattacharya,
V. Bhalerao,
S. V. Vadawale,
N. P. S. Mithun,
R. Pandiyan,
K. Subbarao,
S. Seetha,
K. Suryanarayana Sarma
Abstract:
Charged Particle Monitor (CPM) on-board the AstroSat satellite is an instrument designed to detect the flux of charged particles at the satellite location. A Cesium Iodide Thallium (CsI(Tl)) crystal is used with a Kapton window to detect protons with energies greater than 1 MeV. The ground calibration of CPM was done using gamma-rays from radioactive sources and protons from particle accelerators.…
▽ More
Charged Particle Monitor (CPM) on-board the AstroSat satellite is an instrument designed to detect the flux of charged particles at the satellite location. A Cesium Iodide Thallium (CsI(Tl)) crystal is used with a Kapton window to detect protons with energies greater than 1 MeV. The ground calibration of CPM was done using gamma-rays from radioactive sources and protons from particle accelerators. Based on the ground calibration results, energy deposition above 1 MeV are accepted and particle counts are recorded. It is found that CPM counts are steady and the signal for the onset and exit of South Atlantic Anomaly (SAA) region are generated in a very reliable and stable manner.
△ Less
Submitted 21 August, 2016;
originally announced August 2016.
-
The Cadmium Zinc Telluride Imager on AstroSat
Authors:
V. Bhalerao,
D. Bhattacharya,
A. Vibhute,
P. Pawar,
A. R. Rao,
M. K. Hingar,
Rakesh Khanna,
A. P. K. Kutty,
J. P. Malkar,
M. H. Patil,
Y. K. Arora,
S. Sinha,
P. Priya,
Essy Samuel,
S. Sreekumar,
P. Vinod,
N. P. S. Mithun,
S. V. Vadawale,
N. Vagshette,
K. H. Navalgund,
K. S. Sarma,
R. Pandiyan,
S. Seetha,
K. Subbarao
Abstract:
The Cadmium Zinc Telluride Imager (CZTI) is a high energy, wide-field imaging instrument on AstroSat. CZT's namesake Cadmium Zinc Telluride detectors cover an energy range from 20 keV to > 200 keV, with 11% energy resolution at 60 keV. The coded aperture mask attains an angular resolution of 17' over a 4.6 deg x 4.6 deg (FWHM) field of view. CZTI functions as an open detector above 100 keV, contin…
▽ More
The Cadmium Zinc Telluride Imager (CZTI) is a high energy, wide-field imaging instrument on AstroSat. CZT's namesake Cadmium Zinc Telluride detectors cover an energy range from 20 keV to > 200 keV, with 11% energy resolution at 60 keV. The coded aperture mask attains an angular resolution of 17' over a 4.6 deg x 4.6 deg (FWHM) field of view. CZTI functions as an open detector above 100 keV, continuously sensitive to GRBs and other transients in about 30% of the sky. The pixellated detectors are sensitive to polarisation above ~100 keV, with exciting possibilities for polarisation studies of transients and bright persistent sources. In this paper, we provide details of the complete CZTI instrument, detectors, coded aperture mask, mechanical and electronic configuration, as well as data and products.
△ Less
Submitted 11 August, 2016;
originally announced August 2016.
-
Investigating the connection between Quasi Periodic Oscillations and spectral components with NuSTAR data of GRS 1915+105
Authors:
Anjali Rao Jassal,
Santosh V. Vadawale,
Mithun N. P. S,
Ranjeev Misra
Abstract:
The low frequency quasi periodic oscillations (QPOs) are commonly observed during hard states of black hole binaries. Several studies have established various observational/empirical correlations between spectral parameters and QPO properties, indicating a close link between the two. However, the exact mechanism of generation of QPO is not yet well understood. In this paper, we present our attempt…
▽ More
The low frequency quasi periodic oscillations (QPOs) are commonly observed during hard states of black hole binaries. Several studies have established various observational/empirical correlations between spectral parameters and QPO properties, indicating a close link between the two. However, the exact mechanism of generation of QPO is not yet well understood. In this paper, we present our attempts to comprehend the connection between the spectral components and the low frequency QPO observed in GRS 1915+105 using the data from NuSTAR. Detailed spectral modeling as well as the presence of the low frequency QPO and its energy dependence during this observation have been reported by Miller et al. (2013) and Zhang et al. (2015) respectively. We investigate the compatibility of the spectral model and energy dependence of the QPO by simulating light curves in various energy bands for small variation of the spectral parameters. The basic concept here is to establish connection, if any, between the QPO and the variation of either a spectral component or a specific parameter, which in turn can shed some light on the origin of the QPO. We begin with the best fit spectral model of Miller et al. (2013) and simulate the light curve by varying the spectral parameter at frequencies close to the observed QPO frequency in order to generate the simulated QPO. Further we simulate similar light curves in various energy bands in order to reproduce the observed energy dependence of RMS amplitude of the QPO. We find that the observed trend of increasing RMS amplitude with energy can be reproduced qualitatively if the spectral index is assumed to be varying with the phases of the QPO. Variation of any other spectral parameter does not reproduce the observed energy dependence.
△ Less
Submitted 6 December, 2015;
originally announced December 2015.
-
Development of a Hard X-ray focal plane Compton Polarimeter: A compact polarimetric configuration with Scintillators and Si photomultipliers
Authors:
T. Chattopadhyay,
S. V. Vadawale,
S. K. Goyal,
Mithun N. P. S.,
A. R. Patel,
R. Shukla,
T. Ladiya,
M. Shanmugam,
V. R. Patel,
G. P. Ubale
Abstract:
X-ray polarization measurement of cosmic sources provides two unique parameters namely degree and angle of polarization which can probe the emission mechanism and geometry at close vicinity of the compact objects. Specifically, the hard X-ray polarimetry is more rewarding because the sources are expected to be intrinsically highly polarized at higher energies. With the successful implementation of…
▽ More
X-ray polarization measurement of cosmic sources provides two unique parameters namely degree and angle of polarization which can probe the emission mechanism and geometry at close vicinity of the compact objects. Specifically, the hard X-ray polarimetry is more rewarding because the sources are expected to be intrinsically highly polarized at higher energies. With the successful implementation of Hard X-ray optics in NuSTAR, it is now feasible to conceive Compton polarimeters as focal plane detectors. Such a configuration is likely to provide sensitive polarization measurements in hard X-rays with a broad energy band. We are develo** a focal plane hard X-ray Compton polarimeter consisting of a plastic scintillator as active scatterer surrounded by a cylindrical array of CsI(Tl) scintillators. The scatterer is 5 mm diameter and 100 mm long plastic scintillator (BC404) viewed by normal PMT. The photons scattered by the plastic scatterer are collected by a cylindrical array of 16 CsI(Tl) scintillators (5 mm x 5 mm x 150 mm) which are read by Si Photomultiplier (SiPM). Use of the new generation SiPMs ensures the compactness of the instrument which is essential for the design of focal plane detectors. The expected sensitivity of such polarimetric configuration and complete characterization of the plastic scatterer, specially at lower energies have been discussed in Chattopadhyay et al. (Exp. Astron. 35, 391-412, 2013; Astrophys. J. Suppl. 212, 12, 2014). In this paper, we characterize the CsI(Tl) absorbers coupled to SiPM. We also present the experimental results from the fully assembled configuration of the Compton polarimeter.
△ Less
Submitted 22 October, 2015;
originally announced October 2015.
-
Why is IGR J17091-3624 so faint? Constraints on distance, mass, and spin from `phase-resolved' spectroscopy of the `heartbeat' oscillations
Authors:
Anjali Rao,
S. V. Vadawale
Abstract:
IGR J17091--3624 is a transient X-ray source and is believed to be a Galactic black hole candidate. Recently, it has received a considerable attention due to the detection of peculiar variability patterns known as `heartbeats', which are quasi-periodic mini-outbursts repeated over timescales ranging between 5 and 70 s. So far, such variability patterns have been observed only in GRS 1915+105 and t…
▽ More
IGR J17091--3624 is a transient X-ray source and is believed to be a Galactic black hole candidate. Recently, it has received a considerable attention due to the detection of peculiar variability patterns known as `heartbeats', which are quasi-periodic mini-outbursts repeated over timescales ranging between 5 and 70 s. So far, such variability patterns have been observed only in GRS 1915+105 and these are classified as $ρ$- and $ν$-variability classes. Here, we present the results of `phase-resolved' spectroscopy of the `heartbeat' oscillations of IGR J17091-3624 using data from simultaneous observations made by RXTE and XMM-Newton. We find that the 0.7--35 keV spectra can be fitted with a `canonical' model for black hole sources consisting of only two components---a multi-temperature disk black body and a power law (or its equivalent). We attempt to constrain the system parameters of the source by simultaneously fitting spectra during different phases of the burst profile while tying the system parameters across the phases. The results indicate that the source is a high inclination binary ($i$>53$^\circ$). Further, the observed low flux from the source can be explained only if the black hole spin is very low, along with constraints on the black hole mass (<5 M$_\odot$) and the distance (>20 kpc). For higher inclination angles, which is favored by the data, the black hole spin is required to be negative. Thus, low or retrograde spin could be the reason for the low luminosity of the source.
△ Less
Submitted 12 September, 2012;
originally announced September 2012.
-
Radiation Environment In Earth-Moon Space: Results From RADOM Experiment Onboard Chandrayaan-1
Authors:
S. V. Vadawale,
J. N. Goswami,
T. P. Dachev,
B. T. Tomov,
V. Girish
Abstract:
The Radiation Monitor (RADOM) payload is a miniature dosimeter-spectrometer onboard Chandrayaan-1 mission for monitoring the local radiation environment in near-Earth space and in lunar space. RADOM measured the total absorbed dose and spectrum of the deposited energy from high energy particles in near-Earth space, en-route and in lunar orbit. RADOM was the first experiment to be switched on soon…
▽ More
The Radiation Monitor (RADOM) payload is a miniature dosimeter-spectrometer onboard Chandrayaan-1 mission for monitoring the local radiation environment in near-Earth space and in lunar space. RADOM measured the total absorbed dose and spectrum of the deposited energy from high energy particles in near-Earth space, en-route and in lunar orbit. RADOM was the first experiment to be switched on soon after the launch of Chandrayaan-1 and was operational till the end of the mission. This paper summarizes the observations carried out by RADOM during the entire life time of the Chandrayaan-1 mission and some the salient results.
△ Less
Submitted 9 December, 2010;
originally announced December 2010.
-
Suzaku observation of the transient X-ray pulsar GRO J1008-57
Authors:
Sachindra Naik,
Biswajit Paul,
Chetan Kachhara,
Santosh V. Vadawale
Abstract:
We report the timing and broad-band spectral properties of the Be transient high mass X-ray binary pulsar GRO J1008-57 using a Suzaku observation in the declining phase of its 2007 November-December outburst. Pulsations with a period of 93.737 s were clearly detected in the light curves of the pulsar up to the 80-100 keV energy band. The pulse profile was found to be strongly energy dependent, a d…
▽ More
We report the timing and broad-band spectral properties of the Be transient high mass X-ray binary pulsar GRO J1008-57 using a Suzaku observation in the declining phase of its 2007 November-December outburst. Pulsations with a period of 93.737 s were clearly detected in the light curves of the pulsar up to the 80-100 keV energy band. The pulse profile was found to be strongly energy dependent, a double peaked profile at soft X-ray energy bands (< 8 keV) and a single peaked smooth profile at hard X-rays. The broad-band energy spectrum of the pulsar, reported for the first instance in this paper, is well described with three different continuum models viz. (i) a high energy cut-off power-law, (ii) a Negative and Positive power-law with EXponential cut-off (NPEX), and (iii) a partial covering power-law with high energy cut-off. Inspite of large value of absorption column density in the direction of the pulsar, a blackbody component of temperature ~0.17 keV for the soft excess was required for the first two continuum models. A narrow iron K_αemission line was detected in the pulsar spectrum. The partial covering model, however, is found to explain the phase averaged and phase resolved spectra well. The dip like feature in the pulse profile can be explained by the presence of an additional absorption component with high column density and covering fraction at the same pulse phase. The details of the results are described in the paper.
△ Less
Submitted 2 December, 2010;
originally announced December 2010.
-
Comparative study of different scattering geometries for the proposed Indian X-ray polarization measurement experiment using Geant4
Authors:
S. V. Vadawale,
B. Paul,
J. Pendharkar,
Sachindra Naik
Abstract:
Polarization measurements in X-rays can provide unique opportunity to study the behavior of matter and radiation under extreme magnetic fields and extreme gravitational fields. Unfortunately, over past two decades, when X-ray astronomy witnessed multiple order of magnitude improvement in temporal, spatial and spectral sensitivities, there is no (or very little) progress in the field of polarizat…
▽ More
Polarization measurements in X-rays can provide unique opportunity to study the behavior of matter and radiation under extreme magnetic fields and extreme gravitational fields. Unfortunately, over past two decades, when X-ray astronomy witnessed multiple order of magnitude improvement in temporal, spatial and spectral sensitivities, there is no (or very little) progress in the field of polarization measurements of astrophysical X-rays. Recently, a proposal has been submitted to ISRO for a dedicated small satellite based experiment to carry out X-ray polarization measurement, which aims to provide the first X-ray polarization measurements since 1976. This experiment will be based on the well known principle of polarization measurement by Thomson scattering and employs the baseline design of a central low Z scatterer surrounded by X-ray detectors to measure the angular intensity distribution of the scattered X-rays. The sensitivity of such experiment is determined by the collecting area, scattering and detection efficiency, X-ray detector background, and the modulation factor. Therefore, it is necessary to carefully select the scattering geometry which can provide the highest modulation factor and thus highest sensitivity within the specified experimental constraints. The effective way to determine optimum scattering geometry is by studying various possible scattering geometries by means of Monte Carlo simulations. Here we present results of our detailed comparative study based on Geant4 simulations of five different scattering geometries which can be considered within the weight and size constraints of the proposed small satellite based X-ray polarization measurement experiment.
△ Less
Submitted 2 March, 2010;
originally announced March 2010.
-
Monte-Carlo simulations of the expected imaging performance of the EXIST high-energy telescope
Authors:
S. V. Vadawale,
J. Hong,
J. E. Grindlay,
G. Skinner
Abstract:
EXIST is being studied as the Black Hole Finder Probe, one of the 3 Einstein Probe missions under NASA's Beyond Einstein program. The major science goals for EXIST include highly sensitive full-sky hard X-ray survey in a very wide energy band of 5-600 keV. The scientific requirements of wide energy band (10-600 keV for the High Energy Telescope considered for EXIST) and large field of view (appr…
▽ More
EXIST is being studied as the Black Hole Finder Probe, one of the 3 Einstein Probe missions under NASA's Beyond Einstein program. The major science goals for EXIST include highly sensitive full-sky hard X-ray survey in a very wide energy band of 5-600 keV. The scientific requirements of wide energy band (10-600 keV for the High Energy Telescope considered for EXIST) and large field of view (approximately 130 deg x 60 deg in the current design, incorporating an array of 18 contiguous very large area coded aperture telescopes) presents significant imaging challenges. The requirement of achieving high imaging sensitivity puts stringent limits on the uniformity and knowledge of systematics for the detector plane. In order to accomplish the ambitious scientific requirements of EXIST, it is necessary to implement many novel techniques. Here we present the initial results of our extensive Monte-Carlo simulations of coded mask imaging for EXIST to estimate the performance degradation due to various factors affecting the imaging such as the non-ideal detector plane and bright partially coded sources.
△ Less
Submitted 26 September, 2005;
originally announced September 2005.