-
Modeling beam propagation in a moving nonlinear medium
Authors:
Ryan Hogan,
Giulia Marcucci,
Akbar Safari,
A. Nicholas Black,
Boris Braverman,
Jeremy Upham,
Robert W. Boyd
Abstract:
Fully describing light propagation in a rotating, anisotropic medium with thermal nonlinearity requires modeling the interplay between nonlinear refraction, birefringence, and the nonlinear group index. Incorporating these factors into a generalized nonlinear Schrödinger equation and fitting them to recent experimental results reveals two key relationships: the photon drag effect can have a nonlin…
▽ More
Fully describing light propagation in a rotating, anisotropic medium with thermal nonlinearity requires modeling the interplay between nonlinear refraction, birefringence, and the nonlinear group index. Incorporating these factors into a generalized nonlinear Schrödinger equation and fitting them to recent experimental results reveals two key relationships: the photon drag effect can have a nonlinear component that is dependent on the motion of the medium, and the temporal dynamics of the moving birefringent nonlinear medium create distorted figure-eight-like transverse trajectories at the output. The beam trajectory can be accurately modelled with a full understanding of the propagation effects. Efficiently modeling these effects and accurately predicting the beam's output position has implications for optimizing applications in velocimetry and beam-steering. Understanding the roles of competitive nonlinearities gives insight into the creation or suppression of nonlinear phenomena like self-action effects.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Photon Number Resolving Detection with a Single-Photon Detector and Adaptive Storage Loop
Authors:
Nicholas M. Sullivan,
Boris Braverman,
Jeremy Upham,
Robert W. Boyd
Abstract:
Photon number resolving (PNR) measurements are beneficial or even necessary for many applications in quantum optics. Unfortunately, PNR detectors are usually large, slow, expensive, and difficult to operate. However, if the input signal is multiplexed, photon "click" detectors, that lack an intrinsic photon number resolving capability, can still be used to realize photon number resolution. Here, w…
▽ More
Photon number resolving (PNR) measurements are beneficial or even necessary for many applications in quantum optics. Unfortunately, PNR detectors are usually large, slow, expensive, and difficult to operate. However, if the input signal is multiplexed, photon "click" detectors, that lack an intrinsic photon number resolving capability, can still be used to realize photon number resolution. Here, we investigate the operation of a single click detector, together with a storage line with tunable outcoupling. Using adaptive feedback to adjust the storage outcoupling rate, the dynamic range of the detector can in certain situations be extended by up to an order of magnitude relative to a purely passive setup. An adaptive approach can thus allow for photon number variance below the quantum shot noise limit under a wider range of conditions than using a passive multiplexing approach. This can enable applications in quantum enhanced metrology and quantum computing.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Strong Reverse Saturation and Fast-Light in Ruby
Authors:
Akbar Safari,
Cara Selvarajah,
Jenine Evans,
Jeremy Upham,
Robert W. Boyd
Abstract:
We observe a strong reverse saturation of absorption in ruby at a wavelength of 473 nm. With an intensity-modulated laser, we observe that the peaks of the pulses appear more than a hundred microseconds earlier than the reference signal. A theoretical model based on coherent population oscillation would suggest a fast-light effect with an extremely large and negative group index of…
▽ More
We observe a strong reverse saturation of absorption in ruby at a wavelength of 473 nm. With an intensity-modulated laser, we observe that the peaks of the pulses appear more than a hundred microseconds earlier than the reference signal. A theoretical model based on coherent population oscillation would suggest a fast-light effect with an extremely large and negative group index of $-(1.7\pm0.1)\times 10^6$. We propose that this pulse advancement can also be described by time-dependent absorption of ruby. Our study helps to understand the nature of the fast- and slow-light effects in transition-metal-doped crystals such as ruby and alexandrite.
△ Less
Submitted 30 January, 2023;
originally announced January 2023.
-
Fourier-Engineered Plasmonic Lattice Resonances
Authors:
Theng-Loo Lim,
Yaswant Vaddi,
M. Saad Bin-Alam,
Lin Cheng,
Rasoul Alaee,
Jeremy Upham,
Mikko J. Huttunen,
Ksenia Dolgaleva,
Orad Reshef,
Robert W. Boyd
Abstract:
Resonances in optical systems are useful for many applications, such as frequency comb generation, optical filtering, and biosensing. However, many of these applications are difficult to implement in optical metasurfaces because traditional approaches for designing multi-resonant nanostructures require significant computational and fabrication efforts. To address this challenge, we introduce the c…
▽ More
Resonances in optical systems are useful for many applications, such as frequency comb generation, optical filtering, and biosensing. However, many of these applications are difficult to implement in optical metasurfaces because traditional approaches for designing multi-resonant nanostructures require significant computational and fabrication efforts. To address this challenge, we introduce the concept of Fourier lattice resonances (FLRs) in which multiple desired resonances can be chosen a priori and used to dictate the metasurface design. Because each resonance is supported by a distinct surface lattice mode, each can have a high quality factor. Here, we experimentally demonstrate several metasurfaces with arbitrarily placed resonances (e.g., at 1310 and 1550 nm) and Q-factors as high as 800 in a plasmonic platform. This flexible procedure requires only the computation of a single Fourier transform for its design, and is based on standard lithographic fabrication methods, allowing one to design and fabricate a metasurface to fit any specific, optical-cavity-based application. This work represents an important milestone towards the complete control over the transmission spectrum of a metasurface.
△ Less
Submitted 21 December, 2021;
originally announced December 2021.
-
Flat Magic Window
Authors:
Felix Hufnagel,
Alessio D'Errico,
Hugo Larocque,
Fatimah Alsaiari,
Jeremy Upham,
Ebrahim Karimi
Abstract:
Magic windows (or mirrors) consist of optical devices with a surface deformation or thickness distribution devised in such a way to form a desired image. The associated image intensity distribution has been shown to be related to the Laplacian of the height of the surface relief. We experimentally realize such devices with flat optics employing optical spin-to-orbital angular momentum coupling, wh…
▽ More
Magic windows (or mirrors) consist of optical devices with a surface deformation or thickness distribution devised in such a way to form a desired image. The associated image intensity distribution has been shown to be related to the Laplacian of the height of the surface relief. We experimentally realize such devices with flat optics employing optical spin-to-orbital angular momentum coupling, which represent a new paradigm for light manipulation. The desired pattern and experimental specifications for designing the flat optics was implemented with a re-configurable spatial light modulator which acted as the magic mirror. The flat plate, optical spin-to-orbital angular momentum coupler, is then fabricated by spatially structuring nematic liquid crystals. The plate is used to demonstrate the concept of a polarization-switchable magic window, where, depending on the input circular polarization handedness, one can display either the desired image or the image resulting from the negative of the window's phase.
△ Less
Submitted 13 December, 2021;
originally announced December 2021.
-
Cross-polarized surface lattice resonances in a rectangular lattice plasmonic metasurface
Authors:
M. Saad Bin-Alam,
Orad Reshef,
Raja Naeem Ahmad,
Jeremy Upham,
Mikko J. Huttunen,
Ksenia Dolgaleva,
Robert W. Boyd
Abstract:
Multiresonant metasurfaces could enable many applications in filtering, sensing and nonlinear optics. However, develo** a metasurface with more than one high-quality-factor or high-Q resonance at designated resonant wavelengths is challenging. Here, we experimentally demonstrate a plasmonic metasurface exhibiting different, narrow surface lattice resonances by exploiting the polarization degree…
▽ More
Multiresonant metasurfaces could enable many applications in filtering, sensing and nonlinear optics. However, develo** a metasurface with more than one high-quality-factor or high-Q resonance at designated resonant wavelengths is challenging. Here, we experimentally demonstrate a plasmonic metasurface exhibiting different, narrow surface lattice resonances by exploiting the polarization degree of freedom where different lattice modes propagate along different dimensions of the lattice. The surface consists of aluminum nanostructures in a rectangular periodic lattice. The resulting surface lattice resonances were measured around 630 nm and 1160 nm with Q-factors of ~50 and ~800, respectively. The latter is a record-high plasmonic Q-factor within the near-infrared type-II window. Such metasurfaces could benefit applications such as frequency conversion and all-optical switching.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Relaxed phase-matching constraints in zero-index waveguides
Authors:
Justin R. Gagnon,
Orad Reshef,
Daniel H. G. Espinosa,
M. Zahirul Alam,
Daryl I. Vulis,
Erik N. Knall,
Jeremy Upham,
Yang Li,
Ksenia Dolgaleva,
Eric Mazur,
Robert W. Boyd
Abstract:
The nonlinear optical response of materials is the foundation upon which applications such as frequency conversion, all-optical signal processing, molecular spectroscopy, and nonlinear microscopy are built. However, the utility of all such parametric nonlinear optical processes is hampered by phase-matching requirements. Quasi-phase-matching, birefringent phase matching, and higher-order-mode phas…
▽ More
The nonlinear optical response of materials is the foundation upon which applications such as frequency conversion, all-optical signal processing, molecular spectroscopy, and nonlinear microscopy are built. However, the utility of all such parametric nonlinear optical processes is hampered by phase-matching requirements. Quasi-phase-matching, birefringent phase matching, and higher-order-mode phase matching have all been developed to address this constraint, but the methods demonstrated to date suffer from the inconvenience of only being phase-matched for a single, specific arrangement of beams, typically co-propagating, resulting in cumbersome experimental configurations and large footprints for integrated devices. Here, we experimentally demonstrate that these phase-matching requirements may be satisfied in a parametric nonlinear optical process for multiple, if not all, configurations of input and output beams when using low-index media. Our measurement constitutes the first experimental observation of direction-independent phase matching for a medium sufficiently long for phase matching concerns to be relevant. We demonstrate four-wave mixing from spectrally distinct co- and counter-propagating pump and probe beams, the backward-generation of a nonlinear signal, and excitation by an out-of-plane probe beam. These results explicitly show that the unique properties of low-index media relax traditional phase-matching constraints, which can be exploited to facilitate nonlinear interactions and miniaturize nonlinear devices, thus adding to the established exceptional properties of low-index materials.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
Enhanced Nonlinear Optical Responses of Layered Epsilon-Near-Zero Metamaterials at Visible Frequencies
Authors:
Sisira Suresh,
Orad Reshef,
M. Zahirul Alam,
Jeremy Upham,
Mohammad Karimi,
Robert W. Boyd
Abstract:
Optical materials with vanishing dielectric permittivity, known as epsilon-near-zero (ENZ) materials, have been shown to possess enhanced nonlinear optical responses in their ENZ region. These strong nonlinear optical properties have been firmly established in homogeneous materials; however, it is as of yet unclear whether metamaterials with effective optical parameters can exhibit a similar enhan…
▽ More
Optical materials with vanishing dielectric permittivity, known as epsilon-near-zero (ENZ) materials, have been shown to possess enhanced nonlinear optical responses in their ENZ region. These strong nonlinear optical properties have been firmly established in homogeneous materials; however, it is as of yet unclear whether metamaterials with effective optical parameters can exhibit a similar enhancement. Here, we probe an optical ENZ metamaterial composed of a subwavelength periodic stack of alternating Ag and SiO$_2$ layers and measure a nonlinear refractive index $n_2 = (1.2 \pm 0.1) \times 10^{-12}$ m$^2$/W and nonlinear absorption coefficient $β= (-1.5 \pm 0.2) \times 10^{-5}$ m/W at its effective zero-permittivity wavelength. The measured $n_2$ is $10^7$ times larger than $n_2$ of fused silica and four times larger than that the $n_2$ of silver. We observe that the nonlinear enhancement in $n_2$ scales as $1/(n_0 \mathrm{Re}[n_0])$, where $n_0$ is the linear effective refractive index. As opposed to homogeneous ENZ materials, whose optical properties are dictated by their intrinsic material properties and hence are not widely tunable, the zero-permittivity wavelength of the demonstrated metamaterials may be chosen to lie anywhere within the visible spectrum by selecting the right thicknesses of the sub-wavelength layers. Consequently, our results offer the promise of a means to design metamaterials with large nonlinearities for applications in nanophotonics at any specified optical wavelength.
△ Less
Submitted 24 February, 2021; v1 submitted 25 May, 2020;
originally announced May 2020.
-
Ultra-high-Q resonances in plasmonic metasurfaces
Authors:
M. Saad Bin-Alam,
Orad Reshef,
Yaryna Mamchur,
M. Zahirul Alam,
Graham Carlow,
Jeremy Upham,
Brian T. Sullivan,
Jean-Michel Ménard,
Mikko J. Huttunen,
Robert W. Boyd,
Ksenia Dolgaleva
Abstract:
Plasmonic nanostructures hold promise for the realization of ultra-thin sub-wavelength devices, reducing power operating thresholds and enabling nonlinear optical functionality in metasurfaces. However, this promise is substantially undercut by absorption introduced by resistive losses, causing the metasurface community to turn away from plasmonics in favour of alternative material platforms (e.g.…
▽ More
Plasmonic nanostructures hold promise for the realization of ultra-thin sub-wavelength devices, reducing power operating thresholds and enabling nonlinear optical functionality in metasurfaces. However, this promise is substantially undercut by absorption introduced by resistive losses, causing the metasurface community to turn away from plasmonics in favour of alternative material platforms (e.g., dielectrics) that provide weaker field enhancement, but more tolerable losses. Here, we report a plasmonic metasurface with a quality-factor (Q-factor) of 2340 in the telecommunication C band by exploiting surface lattice resonances (SLRs), exceeding the record by an order of magnitude. Additionally, we show that SLRs retain many of the same benefits as localized plasmonic resonances, such as field enhancement and strong confinement of light along the metal surface. Our results demonstrate that SLRs provide an exciting and unexplored method to tailor incident light fields, and could pave the way to flexible wavelength-scale devices for any optical resonating application.
△ Less
Submitted 24 February, 2021; v1 submitted 10 April, 2020;
originally announced April 2020.
-
A nonreciprocal optical resonator with broken time-invariance for arbitrarily high time-bandwidth performance
Authors:
Ivan Cardea,
Davide Grassani,
Simon J. Fabbri,
Jeremy Upham,
Robert W. Boyd,
Hatice Altug,
Sebastian A. Schulz,
Kosmas L. Tsakmakidis,
Camille-Sophie Brès
Abstract:
Most present-day resonant systems, throughout physics and engineering, are characterized by a strict time-reversal symmetry between the rates of energy coupled in and out of the system, which leads to a trade-off between how long a wave can be stored in the system and the system bandwidth. Any attempt to reduce the losses of the resonant system, and hence store a (mechanical, acoustic, electronic,…
▽ More
Most present-day resonant systems, throughout physics and engineering, are characterized by a strict time-reversal symmetry between the rates of energy coupled in and out of the system, which leads to a trade-off between how long a wave can be stored in the system and the system bandwidth. Any attempt to reduce the losses of the resonant system, and hence store a (mechanical, acoustic, electronic, optical, atomic, or of any other nature) wave for more time, will inevitably also reduce the bandwidth of the system. Until recently, this time-bandwidth limit has been considered fundamental, arising from basic Fourier reciprocity. A recent theory suggested that it might in fact be overcome by breaking Lorentz reciprocity in the resonant system, reinvigorated a debate about whether (or not) this was indeed the case. Here, we report an experimental realization of a cavity where, inducing nonreciprocity by breaking the time invariance, we do overcome the fundamental time-bandwidth limit of ordinary resonant systems by a factor of 30, in full agreement with accompanying numerical simulations. We show that, although in practice experimental constraints limit our scheme, the time bandwidth product can be arbitrarily large, simply dictated by the finesse of the cavity. Our experimental realization uses a simple macroscopic, time-variant, fiber-optic cavity, where we break Lorentz reciprocity by non-adiabatically opening the cavity, injecting a pulse of large bandwidth, and then closing the cavity, storing the pulse which can be released on-demand at a later time. Our results open the path for designing resonant systems, ubiquitous in physics and engineering, that can simultaneously be broadband (i.e., ultrafast) and possessing long storage times, thereby unleashing fundamentally new functionalities in wave physics and wave-matter interactions.
△ Less
Submitted 10 April, 2020; v1 submitted 20 March, 2019;
originally announced March 2019.
-
Beyond the perturbative description of the nonlinear optical response of low-index materials
Authors:
Orad Reshef,
Enno Giese,
M. Zahirul Alam,
Israel De Leon,
Jeremy Upham,
Robert W. Boyd
Abstract:
We show that standard approximations in nonlinear optics are violated for situations involving a small value of the linear refractive index. Consequently, the conventional equation for the intensity-dependent refractive index, $n(I) = n_0 + n_2 I$, becomes inapplicable in epsilon-near-zero and low-index media, even in the presence of only third-order effects. For the particular case of indium tin…
▽ More
We show that standard approximations in nonlinear optics are violated for situations involving a small value of the linear refractive index. Consequently, the conventional equation for the intensity-dependent refractive index, $n(I) = n_0 + n_2 I$, becomes inapplicable in epsilon-near-zero and low-index media, even in the presence of only third-order effects. For the particular case of indium tin oxide, we find that the $χ^{(3)}$, $χ^{(5)}$ and $χ^{(7)}$ contributions to refraction eclipse the linear term; thus, the nonlinear response can no longer be interpreted as a perturbation in these materials. Although the response is non-perturbative, we find no evidence that the power series expansion of the material polarization diverges.
△ Less
Submitted 15 July, 2017; v1 submitted 14 February, 2017;
originally announced February 2017.
-
Arbitrary optical wavefront sha** via spin-to-orbit coupling
Authors:
Hugo Larocque,
Jérémie Gagnon-Bischoff,
Frédéric Bouchard,
Robert Fickler,
Jeremy Upham,
Robert W. Boyd,
Ebrahim Karimi
Abstract:
Converting spin angular momentum to orbital angular momentum has been shown to be a practical and efficient method for generating optical beams carrying orbital angular momentum and possessing a space-varying polarized field. Here, we present novel liquid crystal devices for tailoring the wavefront of optical beams through the Pancharatnam-Berry phase concept. We demonstrate the versatility of the…
▽ More
Converting spin angular momentum to orbital angular momentum has been shown to be a practical and efficient method for generating optical beams carrying orbital angular momentum and possessing a space-varying polarized field. Here, we present novel liquid crystal devices for tailoring the wavefront of optical beams through the Pancharatnam-Berry phase concept. We demonstrate the versatility of these devices by generating an extensive range of optical beams such as beams carrying $\pm200$ units of orbital angular momentum along with Bessel, Airy and Ince-Gauss beams. We characterize both the phase and the polarization properties of the generated beams, confirming our devices' performance.
△ Less
Submitted 23 August, 2016;
originally announced August 2016.
-
Enhanced spectral sensitivity of a chip-scale photonic-crystal slow-light interferometer
Authors:
Omar S. Magaña-Loaiza,
Boshen Gao,
Sebastian A. Schulz,
Kashif Awan,
Jeremy Upham,
Ksenia Dolgaleva,
Robert W. Boyd
Abstract:
We experimentally demonstrate that the spectral sensitivity of a Mach-Zehnder (MZ) interferometer can be enhanced through structural slow light. We observe a 20 times enhancement by placing a dispersion-engineered-slow-light photonic-crystal waveguide in one arm of a fibre-based MZ interferometer. The spectral sensitivity of the interferometer increases roughly linearly with the group index, and w…
▽ More
We experimentally demonstrate that the spectral sensitivity of a Mach-Zehnder (MZ) interferometer can be enhanced through structural slow light. We observe a 20 times enhancement by placing a dispersion-engineered-slow-light photonic-crystal waveguide in one arm of a fibre-based MZ interferometer. The spectral sensitivity of the interferometer increases roughly linearly with the group index, and we have quantified the resolution in terms of the spectral density of interference fringes. These results show promise for the use of slow-light methods for develo** novel tools for optical metrology and, specifically, for compact high-resolution spectrometers.
△ Less
Submitted 28 January, 2016;
originally announced January 2016.
-
Optical spin-to-orbital angular momentum conversion in ultra-thin metasurfaces with arbitrary topological charges
Authors:
Frédéric Bouchard,
Israel De Leon,
Sebastian A. Schulz,
Jeremy Upham,
Ebrahim Karimi,
Robert W Boyd
Abstract:
Orbital angular momentum associated with the helical phase-front of optical beams provides an unbounded \qo{space} for both classical and quantum communications. Among the different approaches to generate and manipulate orbital angular momentum states of light, coupling between spin and orbital angular momentum allows a faster manipulation of orbital angular momentum states because it depends on m…
▽ More
Orbital angular momentum associated with the helical phase-front of optical beams provides an unbounded \qo{space} for both classical and quantum communications. Among the different approaches to generate and manipulate orbital angular momentum states of light, coupling between spin and orbital angular momentum allows a faster manipulation of orbital angular momentum states because it depends on manipulating the polarisation state of light, which is simpler and generally faster than manipulating conventional orbital angular momentum generators. In this work, we design and fabricate an ultra-thin spin-to-orbital angular momentum converter, based on plasmonic nano-antennas and operating in the visible wavelength range that is capable of converting spin to an arbitrary value of OAM $\ell$. The nano-antennas are arranged in an array with a well-defined geometry in the transverse plane of the beam, possessing a specific integer or half-integer topological charge $q$. When a circularly polarised light beam traverses this metasurface, the output beam polarisation switches handedness and the OAM changes in value by $\ell = \pm2q\hbar$ per photon. We experimentally demonstrate $\ell$ values ranging from $\pm 1$ to $\pm 25$ with conversion efficiencies of $8.6\pm0.4~\%$. Our ultra-thin devices are integratable and thus suitable for applications in quantum communications, quantum computations and nano-scale sensing.
△ Less
Submitted 21 July, 2014;
originally announced July 2014.
