Showing 1–7 of 7 results for author: Ungureanu, B

Neolithic stone settlements as locally resonant metasurfaces

Authors: Stéphane Brûlé, Bogdan Ungureanu, Stefan Enoch, Sébastien Guenneau

Abstract: We study the dynamic surface response of neolithic stone settlements obtained with seismic ambient noise techniques near the city of Carnac in French Brittany. Surprisingly, we find that menhirs (neolithic human size standing alone granite stones) with an aspect ratio between 1 and 2 periodically arranged atop a thin layer of sandy soil laid on a granite bedrock, exhibit fundamental resonances in… ▽ More We study the dynamic surface response of neolithic stone settlements obtained with seismic ambient noise techniques near the city of Carnac in French Brittany. Surprisingly, we find that menhirs (neolithic human size standing alone granite stones) with an aspect ratio between 1 and 2 periodically arranged atop a thin layer of sandy soil laid on a granite bedrock, exhibit fundamental resonances in the range of 10 to 25 Hz. We propose an analogic Kelvin-Voigt viscoelastic model that explains the origin of such low frequency resonances. We further explore low frequency filtering effect with full wave finite element simulations. Our numerical results confirm the bending nature of fundamental resonances of the menhirs and further suggest additional resonances of rotational and longitudinal nature in the frequency range 25 to 50 Hz. Our study thus paves the way for large scale seismic metasurfaces consisting of granite stones periodically arranged atop a thin layer of regolith over a bedrock, for ground vibration mitigation in earthquake engineering. △ Less

Submitted 21 June, 2022; originally announced June 2022.

Comments: 6 pages, 7 figures

The influence of structure geometry and material on seismic metamaterial performance

Authors: T. Venkatesh Varma, Bogdan Ungureanu, Saikat Sarkar, Richard Craster, Sebastien Guenneau, Stephane Brule

Abstract: Diverting, and controlling, elastic vibrations impacting upon infrastructure is a major challenge for seismic hazard mitigation, and for the reduction of machine noise and vehicle vibration in the urban environment. Seismic metamaterials (SMs), with their inherent ability to manipulate wave propagation, provide a key route for overcoming the technological hurdles involved in this challenge. Engine… ▽ More Diverting, and controlling, elastic vibrations impacting upon infrastructure is a major challenge for seismic hazard mitigation, and for the reduction of machine noise and vehicle vibration in the urban environment. Seismic metamaterials (SMs), with their inherent ability to manipulate wave propagation, provide a key route for overcoming the technological hurdles involved in this challenge. Engineering the structure of the SM serves as a basis to tune and enhance its functionality, and inspired by split rings, swiss-rolls, notch-shaped and labyrinthine designs of elementary cells in electromagnetic and mechanical metamaterials, we investigate altering the structure geometries of SMs with the aim of creating large bandgaps \textcolor{black}{in a subwavelength regime}. We show that square stiff inclusions, perform better in comparison to circular ones, whilst kee** the same filling fraction. En route to enhancing the bandgap, we have also studied the performance of SMs with different constituent materials; we find that steel columns, as inclusions, show large bandgaps, however, the columns are too large for steel to be a feasible material in practical or financial terms. Non-reinforced concrete would be preferable for industry level scaling up of the technology because, concrete is cost-effective, easy to cast directly at the construction site and easy to provide arbitrary geometry of the structure. As a part of this study, we show that concrete columns can also be designed to exhibit bandgaps if we cast them within a soft soil coating surrounding the protected area for various civil structures like a bridge, building, oil pipelines etc. △ Less

Submitted 28 July, 2020; originally announced July 2020.

Localising elastic edge waves via the topological rainbow effect

Authors: Bogdan Ungureanu, Mehul P. Makwana, Richard V. Craster, Sebastien Guenneau

Abstract: We combine two different fields, topological physics and graded metamaterials to design a topological metasurface to control and redirect elastic waves. We strategically design a two-dimensional crystalline perforated elastic plate, using a square lattice, %consisting of bore holes, that hosts symmetry-induced topological edge states. By concurrently allowing the elastic substrate to spatially var… ▽ More We combine two different fields, topological physics and graded metamaterials to design a topological metasurface to control and redirect elastic waves. We strategically design a two-dimensional crystalline perforated elastic plate, using a square lattice, %consisting of bore holes, that hosts symmetry-induced topological edge states. By concurrently allowing the elastic substrate to spatially vary in depth, we are able to convert the incident slow wave into a series of robust modes, with differing envelope modulations. This adiabatic transition localises the incoming energy into a concentrated region where it can then be damped or extracted. For larger transitions, different behaviour is observed; the incoming energy propagates along the interface before being partitioned into two disparate chiral beams. This "topological rainbow" effect leverages two main concepts, namely the quantum valley-Hall effect and the rainbow effect usually associated with electromagnetic metamaterials. The topological rainbow effect transcends specific physical systems, hence, the phenomena we describe can be transposed to other wave physics. Due to the directional tunability of the elastic energy by geometry our results have far-reaching implications for applications such as switches, filters and energy-harvesters. △ Less

Submitted 20 November, 2020; v1 submitted 30 March, 2020; originally announced March 2020.

Seismic wave shield using cubic arrays of split-ball resonators

Authors: Bogdan Ungureanu, Younes Achaoui, Stephane Brule, Stefan Enoch, Richard Craster, Sebastien Guenneau

Abstract: Metre size inertial resonators located in the ground have been theoretically shown to interact with a seismic wave (attenuation, band gaps) to enable protection of surface structures such as buildings. The challenge for Civil Engineering is to both reduce the size of these resonators and to increase their efficiency. Here we explore steel spheres, connected to a concrete bulk medium, either by a c… ▽ More Metre size inertial resonators located in the ground have been theoretically shown to interact with a seismic wave (attenuation, band gaps) to enable protection of surface structures such as buildings. The challenge for Civil Engineering is to both reduce the size of these resonators and to increase their efficiency. Here we explore steel spheres, connected to a concrete bulk medium, either by a coating of rubber, or rubber and steel ligaments, or air and steel ligaments. We show that for a cubic lattice periodicity of 1 metre, we achieve stop bands in the frequency range 14 to 20 Hz; by splitting spheres in 2 and 8 pieces, we tune down the stop bands frequencies and further increase their bandwidth. We thus demonstrate we are able to provide a variety of inertial resonators with stop bands below 10 Hz i.e., in the frequency range of interest for earthquake engineering. △ Less

Submitted 22 April, 2019; originally announced April 2019.

The influence of building interactions on seismic and elastic surface waves

Authors: Bogdan Ungureanu, Sébastien Guenneau, Younes Achaoui, Andre Diatta, Mohamed Farhat, Harsha Hutridurga, Richard V Craster, Stefan Enoch, Stéphane Brûlé

Abstract: We outline some recent research advances on the control of elastic waves in thin and thick plates, that have occurred since the large scale experiment [Phys. Rev. Lett. 112, 133901, 2014] that demonstrated significant interaction of surface seismic waves with holes structuring sedimentary soils at the meter scale. We further investigate the seismic wave trajectories in soils structured with buildi… ▽ More We outline some recent research advances on the control of elastic waves in thin and thick plates, that have occurred since the large scale experiment [Phys. Rev. Lett. 112, 133901, 2014] that demonstrated significant interaction of surface seismic waves with holes structuring sedimentary soils at the meter scale. We further investigate the seismic wave trajectories in soils structured with buildings. A significant substitution of soils by inclusions, acting as foundations, raises the question of the effective dynamic properties of these structured soils. Buildings, in the case of perfect elastic conditions for both soil and buildings, are shown to interact and strongly influence elastic surface waves; such site-city seismic interactions were pointed out in [Bulletin of Seismological Society of America 92, 794-811, 2002], and we investigate a variety of scenarios to illustrate the variety of behaviours possible. △ Less

Submitted 8 April, 2019; originally announced April 2019.

Comments: 15 pages, 9 figures

Seismic waves dam** with arrays of inertial resonators

Authors: Younes Achaoui, Bogdan Ungureanu, Stefan Enoch, Stéphane Brûlé, Sébastien Guenneau

Abstract: We investigate the elastic stop band properties of a theoretical cubic array of iron spheres connected to a bulk of concrete via iron or rubber ligaments. Each sphere can move freely within a surrounding air cavity, but ligaments couple it to the bulk and further facilitate bending and rotational motions. Associated low frequency local resonances are well predicted by an asymptotic formula. We fin… ▽ More We investigate the elastic stop band properties of a theoretical cubic array of iron spheres connected to a bulk of concrete via iron or rubber ligaments. Each sphere can move freely within a surrounding air cavity, but ligaments couple it to the bulk and further facilitate bending and rotational motions. Associated low frequency local resonances are well predicted by an asymptotic formula. We find complete stop bands (for all wave-polarizations) in the frequency range $[16,21]$ Hertz (resp. $[6,11]$ Hertz) for $7.4$-meter (resp. $0.74$-meter) diameter iron spheres with a $10$-meter (resp. $1$-meter) center-to-center spacing, when they are connected to concrete via steel (resp. rubber) ligaments. The scattering problem shows that only bending modes are responsible for dam** and that rotational modes are totally overwritten by bending modes. Regarding seismic applications, we further consider soil as a bulk medium, in which case the relative bandwidth of the low frequency stop band can be enlarged through ligaments of different sizes that allow for well separated bending and rotational modes. We finally achieve some dam** of elastodynamic waves from $8$ to $49$ Hertz (relative stop band of $143$ percent) for iron spheres $0.74$-meter in diameter that are connected to soil with six rubber ligaments of optimized shapes. These results represent a preliminary step in the design of seismic shields placed around, or underneath, the foundations of large civil infrastructures. △ Less

Submitted 12 January, 2016; v1 submitted 18 December, 2015; originally announced December 2015.

Auxetic-like metamaterials as novel earthquake protections

Authors: Bogdan Ungureanu, Younes Achaoui, Stefan Enoch, Stéphane Brûlé, Sébastien Guenneau

Abstract: We propose that wave propagation through a class of mechanical metamaterials opens unprecedented avenues in seismic wave protection based on spectral properties of auxetic-like metamaterials. The elastic parameters of these metamaterials like the bulk and shear moduli, the mass density, and even the Poisson ratio, can exhibit negative values in elastic stop bands. We show here that the propagation… ▽ More We propose that wave propagation through a class of mechanical metamaterials opens unprecedented avenues in seismic wave protection based on spectral properties of auxetic-like metamaterials. The elastic parameters of these metamaterials like the bulk and shear moduli, the mass density, and even the Poisson ratio, can exhibit negative values in elastic stop bands. We show here that the propagation of seismic waves with frequencies ranging from 1Hz to 40Hz can be influenced by a decameter scale version of auxetic-like metamaterials buried in the soil, with the combined effects of impedance mismatch, local resonances and Bragg stop bands. More precisely, we numerically examine and illustrate the markedly different behaviors between the propagation of seismic waves through a homogeneous isotropic elastic medium (concrete) and an auxetic-like metamaterial plate consisting of 64 cells (40mx40mx40m), utilized here as a foundation of a building one would like to protect from seismic site effects. This novel class of seismic metamaterials opens band gaps at frequencies compatible with seismic waves when they are designed appropriately, what makes them interesting candidates for seismic isolation structures. △ Less

Submitted 15 January, 2016; v1 submitted 29 October, 2015; originally announced October 2015.