-
System equivalent flux density of Stokes I, Q, U, V of a polarimetric interferometer
Authors:
A. T. Sutinjo,
D. C. X. Ung,
M. Sokolowski
Abstract:
We present the system equivalent flux density (SEFD) expressions for all four Stokes parameters: I, Q, U, V. The expressions were derived based on our derivation of SEFD I (for Stokes I) and subsequent extensions of that work to phased array and multipole interferometers. The key to the derivation of the SEFD Q, U, V expressions is to recognize that the noisy estimates of Q, U, V can be written as…
▽ More
We present the system equivalent flux density (SEFD) expressions for all four Stokes parameters: I, Q, U, V. The expressions were derived based on our derivation of SEFD I (for Stokes I) and subsequent extensions of that work to phased array and multipole interferometers. The key to the derivation of the SEFD Q, U, V expressions is to recognize that the noisy estimates of Q, U, V can be written as the trace of a matrix product. This shows that the SEFD I is a special case, where the general case involves a diagonal or anti-diagonal 2x2 matrix interposed in the matrix multiplication. Following this step, the relation between the SEFD for I and Q, U, V becomes immediately evident. We present example calculations for a crossed dipole based on the formulas derived and the comparison between simulation and observation using the Murchison Widefield Array (MWA).
△ Less
Submitted 31 May, 2022;
originally announced May 2022.
-
System design and calibration of SITARA -- a global 21 cm short spacing interferometer prototype
Authors:
Jishnu N. Thekkeppattu,
Benjamin McKinley,
Cathryn M. Trott,
Jake Jones,
Daniel C. X. Ung
Abstract:
Global 21-cm experiments require exquisitely precise calibration of the measurement systems in order to separate the weak 21-cm signal from Galactic and extragalactic foregrounds as well as instrumental systematics. Hitherto, experiments aiming to make this measurement have concentrated on measuring this signal using the single element approach. However, an alternative approach based on interferom…
▽ More
Global 21-cm experiments require exquisitely precise calibration of the measurement systems in order to separate the weak 21-cm signal from Galactic and extragalactic foregrounds as well as instrumental systematics. Hitherto, experiments aiming to make this measurement have concentrated on measuring this signal using the single element approach. However, an alternative approach based on interferometers with short baselines is expected to alleviate some of the difficulties associated with a single element approach such as precision modelling of the receiver noise spectrum. Short spacing Interferometer Telescope probing cosmic dAwn and epoch of ReionisAtion (SITARA) is a short spacing interferometer deployed at the Murchison Radio-astronomy Observatory (MRO). It is intended to be a prototype or a test-bed to gain a better understanding of interferometry at short baselines, and develop tools to perform observations and data calibration. In this paper, we provide a description of the SITARA system and its deployment at the MRO, and discuss strategies developed to calibrate SITARA. We touch upon certain systematics seen in SITARA data and their modelling. We find that SITARA has sensitivity to all sky signals as well as non-negligible noise coupling between the antennas. It is seen that the coupled receiver noise has a spectral shape that broadly matches the theoretical calculations reported in prior works. We also find that when appropriately modified antenna radiation patterns taking into account the effects of mutual coupling are used, the measured data are well modelled by the standard visibility equation.
△ Less
Submitted 20 March, 2022;
originally announced March 2022.
-
System equivalent flux density of a low-frequency polarimetric phased array interferometer
Authors:
A. T. Sutinjo,
D. C. X. Ung,
M. Sokolowski,
M. Kovaleva,
S. McSweeney
Abstract:
This paper extends the treatment of system equivalent flux density (SEFD) in Sutinjo, A. T. et al. (2021) (Paper I) to interferometric phased array telescopes. The objective is to develop an SEFD formula involving only the most fundamental assumptions and one that is readily applicable to phased array interferometer radio observations. Then, we aimed at comparing the resultant SEFD expression agai…
▽ More
This paper extends the treatment of system equivalent flux density (SEFD) in Sutinjo, A. T. et al. (2021) (Paper I) to interferometric phased array telescopes. The objective is to develop an SEFD formula involving only the most fundamental assumptions and one that is readily applicable to phased array interferometer radio observations. Then, we aimed at comparing the resultant SEFD expression against the often-used root-mean-square (RMS) SEFD approximation, SEFDrmsI = (1/2)(SEFD^2_XX + SEFD^2_YY)^(1/2) to study the inaccuracy of the SEFDrms.
We take into account all mutual coupling and noise coupling within an array environment (intra-array coupling). This intra-array noise coupling is included in the SEFD expression through the realized noise resistance of the array, which accounts for the system noise. No assumption is made regarding the polarization (or lack thereof) of the sky nor the orthogonality of the antenna elements. The fundamental noise assumption is that, in phasor representation, the real and imaginary components of a given noise source are independent and equally distributed (iid) with zero mean. Noise sources that are mutually correlated and non-iid among themselves are allowed, provided the real and imaginary components of each noise source are iid. The system noise is uncorrelated between array entities separated by a baseline distance, which in the case of the Murchison Widefield Array (MWA) is typically tens of wavelengths or greater. By comparing the resulting SEFD formula to the SEFD_I^rms approximation, we proved that SEFD_I^rms always underestimates the SEFD, which leads to an overestimation of array sensitivity.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
Sensitivity of a Low-Frequency Polarimetric Radio Interferometer
Authors:
A. T. Sutinjo,
M. Sokolowski,
M. Kovaleva,
D. C. X. Ung,
J. W. Broderick,
R. B. Wayth,
D. B. Davidson,
S. J. Tingay
Abstract:
Aims: This paper aims to derive an expression for the sensitivity of a polarimetric radio interferometer that is valid for all-sky observations of arbitrarily polarized sources, with neither a restriction on FoV nor with any a priori assumption regarding the polarization state of the source. We verify the resulting formula with an all-sky observation using the Murchison Widefield Array (MWA) teles…
▽ More
Aims: This paper aims to derive an expression for the sensitivity of a polarimetric radio interferometer that is valid for all-sky observations of arbitrarily polarized sources, with neither a restriction on FoV nor with any a priori assumption regarding the polarization state of the source. We verify the resulting formula with an all-sky observation using the Murchison Widefield Array (MWA) telescope. Methods: The sensitivity expression is developed from first principles by applying the concept of System Equivalent Flux Density (SEFD) to a polarimetric radio interferometer not by computing $A_e/T_{sys}$. The SEFD is calculated from the standard deviation of the noisy flux density estimate for a target source due to system noise. Results: The SEFD for a polarimetric radio interferometer is generally not $1/\sqrt{2}$ of a single-polarized interferometer as is often assumed for narrow FoV. This assumption can lead to significant errors for a dual-polarized dipole based system, which is common in low-frequency radio astronomy: up to $\sim 15\%$ for a zenith angle (ZA) coverage of $45^\circ$, and up to $\sim45\%$ for $60^\circ$ coverage. The worst case errors occur in the diagonal planes of the dipole for very wide FoV. This is demonstrated through theory, simulation and observations. Furthermore, using the resulting formulation, calculation of the off-zenith sensitivity is straightforward and unambiguous. Conclusions: For wide FoV observations pertinent to low-frequency radio interferometer such as the SKA-Low, the narrow FoV and the single-polarized sensitivity expressions are not correct and should be replaced by the formula derived in this paper.
△ Less
Submitted 14 December, 2020;
originally announced December 2020.
-
The All-Sky SignAl Short-Spacing INterferometer (ASSASSIN) I: Global sky measurements with the Engineering Development Array-2
Authors:
B. McKinley,
C. M. Trott,
M. Sokolowski,
R. B. Wayth,
A. Sutinjo,
N. Patra,
J. Nambissan T.,
D. C. X. Ung
Abstract:
Aiming to fill a crucial gap in our observational knowledge of the early Universe, experiments around the world continue to attempt to verify the claimed detection of the redshifted 21-cm signal from Cosmic Dawn by the EDGES experiment. This sky-averaged or 'global' signal from neutral hydrogen should be detectable at low radio frequencies (50-200 MHz), but is difficult to measure due to bright fo…
▽ More
Aiming to fill a crucial gap in our observational knowledge of the early Universe, experiments around the world continue to attempt to verify the claimed detection of the redshifted 21-cm signal from Cosmic Dawn by the EDGES experiment. This sky-averaged or 'global' signal from neutral hydrogen should be detectable at low radio frequencies (50-200 MHz), but is difficult to measure due to bright foreground emission and difficulties in reaching the required levels of instrumental-calibration precision. In this paper we outline our progress toward using a novel new method to measure the global redshifted 21-cm signal. Motivated by the need to use alternative methods with very different systematic errors to EDGES for an independent result, we employ an array of closely-spaced antennas to measure the global sky signal interferometrically, rather than using the conventional approach with a single antenna. We use simulations to demonstrate our newly-developed methods and show that, for an idealised instrument, a 21-cm signal could theoretically be extracted from the visibilities of an array of closely-spaced dipoles. We verify that our signal-extraction methods work on real data using observations made with a Square Kilometre-Array-like prototype; the Engineering Development Array-2. Finally, we use the lessons learned in both our simulations and observations to lay out a clear plan for future work, which will ultimately lead to a new global redshifted 21-cm instrument: the All-Sky SignAl Short-Spacing INterferometer (ASSASSIN).
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
Design Equations for a Closely-Spaced Two-Element Interferometer Including Internal Noise Coupling
Authors:
Adrian T. Sutinjo,
Benjamin McKinley,
Leonid Belostotski,
Daniel C. X. Ung,
Jishnu N. Thekkeppattu
Abstract:
We present design equations for a two-element closely-spaced interferometer for measuring the noise temperature of a uniform sky. Such an interferometer is useful for observing highly diffuse radio sources such as the Milky Way and Cosmological signals. We develop a simple equivalent circuit based on radiophysics and antenna theory to describe the interactions between key design parameters such as…
▽ More
We present design equations for a two-element closely-spaced interferometer for measuring the noise temperature of a uniform sky. Such an interferometer is useful for observing highly diffuse radio sources such as the Milky Way and Cosmological signals. We develop a simple equivalent circuit based on radiophysics and antenna theory to describe the interactions between key design parameters such as antenna self and mutual impedance and noise parameters of the receiver; the latter is considered internal noise. This approach straightforwardly facilitates design studies as the response of the uniform signal and the systematic error due to internal noise coupling can be analyzed using the same equivalent circuit. The equivalent circuit shows that mutual coherence due to internal noise coupling is non-negligible and an inherent property of a closely-spaced interferometer. A realistic example design involving two closely-spaced horizontal dipoles over a lossy ground for Cosmological signal detection from 50 to 100 MHz is discussed as an illustration.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
Noise Temperature of Phased Array Radio Telescope: The Murchison Widefield Array and the Engineering Development Array
Authors:
Daniel C. X. Ung,
Marcin Sokolowski,
Adrian T. Sutinjo,
David B. Davidson
Abstract:
This paper presents a framework to compute the receiver noise temperature (Trcv) of two low-frequency radio telescopes, the Murchison Widefield Array (MWA) and the Engineering Development Array (EDA). The MWA was selected because it is the only operational low-frequency Square Kilometre Array (SKA) precursor at the Murchison Radio-astronomy Observatory, while the EDA was selected because it mimics…
▽ More
This paper presents a framework to compute the receiver noise temperature (Trcv) of two low-frequency radio telescopes, the Murchison Widefield Array (MWA) and the Engineering Development Array (EDA). The MWA was selected because it is the only operational low-frequency Square Kilometre Array (SKA) precursor at the Murchison Radio-astronomy Observatory, while the EDA was selected because it mimics the proposed SKA-Low station size and configuration. It will demonstrated that the use of an existing power wave based framework for noise characterization of multiport amplifiers is sufficiently general to evaluate Trcv of phased arrays. The calculation of Trcv was done using a combination of measured noise parameters of the low-noise amplifier (LNA) and simulated S-parameters of the arrays. The calculated values were compared to measured results obtained via astronomical observation and both results are found to be in agreement. Such verification is lacking in current literature. It was shown that the receiver noise temperatures of both arrays are lower when compared to a single isolated element. This is caused by the increase in mutual coupling within the array which is discussed in depth in this paper.
△ Less
Submitted 11 March, 2020;
originally announced March 2020.
