-
Hybrid Electro-Optic Modulator Combining Silicon Photonic Slot Waveguides with High-k Radio-Frequency Slotlines
Authors:
Sandeep Ummethala,
Juned N. Kemal,
Ahmed S. Alam,
Matthias Lauermann,
Yasar Kutuvantavida,
Sree H. Nandam,
Lothar Hahn,
Delwin L. Elder,
Larry R. Dalton,
Thomas Zwick,
Sebastian Randel,
Wolfgang Freude,
Christian Koos
Abstract:
Electro-optic (EO) modulators rely on interaction of optical and electrical signals with second-order nonlinear media. For the optical signal, this interaction can be strongly enhanced by using dielectric slot-waveguide structures that exploit a field discontinuity at the interface between a high-index waveguide core and the low-index EO cladding. In contrast to this, the electrical signal is usua…
▽ More
Electro-optic (EO) modulators rely on interaction of optical and electrical signals with second-order nonlinear media. For the optical signal, this interaction can be strongly enhanced by using dielectric slot-waveguide structures that exploit a field discontinuity at the interface between a high-index waveguide core and the low-index EO cladding. In contrast to this, the electrical signal is usually applied through conductive regions in the direct vicinity of the optical waveguide. To avoid excessive optical loss, the conductivity of these regions is maintained at a moderate level, thus leading to inherent RC-limitations of the modulation bandwidth. In this paper, we show that these limitations can be overcome by extending the slot-waveguide concept to the modulating radio-frequency (RF) signal. Our device combines an RF slotline that relies on BaTiO3 as a high-k dielectric material with a conventional silicon photonic slot waveguide and a highly efficient organic EO cladding material. In a proof-of-concept experiment, we demonstrate a 1 mm-long Mach-Zehnder modulator that offers a 3 dB-bandwidth of 76 GHz and a 6 dB-bandwidth of 110 GHz along with a small π-voltage of 1.3 V (UπL = 1.3 V mm). To the best of our knowledge, this represents the largest EO bandwidth so far achieved with a silicon photonic modulator based on dielectric waveguides. We further demonstrate the viability of the device in a data transmission experiment using four-state pulse-amplitude modulation (PAM4) at line rates up to 200 Gbit/s. Our first-generation devices leave vast room for further improvement and may open an attractive route towards highly efficient silicon photonic modulators that combine sub-1 mm device lengths with sub-1 V drive voltages and modulation bandwidths of more than 100 GHz.
△ Less
Submitted 20 October, 2020;
originally announced November 2020.
-
Generalized Kramers-Kronig Receiver for Coherent THz Communications
Authors:
Tobias Harter,
Christoph Füllner,
Juned N. Kemal,
Sandeep Ummethala,
Johannes L. Steinmann,
Miriam Brosi,
Jeffrey L. Hesler,
Erik Bründermann,
Anke-Susanne Müller,
Wolfgang Freude,
Sebastian Randel,
Christian Koos
Abstract:
High-speed communication systems rely on spectrally efficient modulation formats that encode information both on the amplitude and on the phase of an electromagnetic carrier. Coherent detection of such signals typically uses rather complex receiver schemes, requiring a continuous-wave (c.w.) local oscillator (LO) as a phase reference and a mixer circuit for spectral down-conversion. In optical com…
▽ More
High-speed communication systems rely on spectrally efficient modulation formats that encode information both on the amplitude and on the phase of an electromagnetic carrier. Coherent detection of such signals typically uses rather complex receiver schemes, requiring a continuous-wave (c.w.) local oscillator (LO) as a phase reference and a mixer circuit for spectral down-conversion. In optical communications, the so-called Kramers-Kronig (KK) scheme has been demonstrated to greatly simplify the receiver, reducing the hardware to a single photodiode. In this approach, an LO tone is transmitted along with the signal, and the amplitude and phase of the complex signal envelope are reconstructed from the photocurrent by digital signal processing. This reconstruction exploits the fact that the real and the imaginary part, or, equivalently, the amplitude and the phase of an analytic signal are connected by a KK-type relation. Here, we transfer the KK scheme to high-speed wireless communications at THz carrier frequencies. We use a Schottky-barrier diode (SBD) as a nonlinear element and generalize the theory of KK processing to account for the non-quadratic characteristics of this device. Using 16-state quadrature amplitude modulation (16QAM), we transmit a net data rate of 115 Gbit/s at a carrier frequency of 0.3 THz over a distance of 110 m.
△ Less
Submitted 8 July, 2019;
originally announced July 2019.
-
Wireless THz link with optoelectronic transmitter and receiver
Authors:
Tobias Harter,
Sandeep Ummethala,
Matthias Blaicher,
Sascha Muehlbrandt,
Stefan Wolf,
Marco Weber,
Md Mosaddek Hossain Adib,
Juned N. Kemal,
Marco Merboldt,
Florian Boes,
Simon Nellen,
Axel Tessmann,
Martin Walther,
Björn Globisch,
Thomas Zwick,
Wolfgang Freude,
Sebastian Randel,
Christian Koos
Abstract:
Photonics might play a key role in future wireless communication systems that operate at THz carrier frequencies. A prime example is the generation of THz data streams by mixing optical signals in high-speed photodetectors. Over the previous years, this concept has enabled a series of wireless transmission experiments at record-high data rates. Reception of THz signals in these experiments, howeve…
▽ More
Photonics might play a key role in future wireless communication systems that operate at THz carrier frequencies. A prime example is the generation of THz data streams by mixing optical signals in high-speed photodetectors. Over the previous years, this concept has enabled a series of wireless transmission experiments at record-high data rates. Reception of THz signals in these experiments, however, still relied on electronic circuits. In this paper, we show that wireless THz receivers can also greatly benefit from optoelectronic signal processing techniques, in particular when carrier frequencies beyond 0.1 THz and wideband tunability over more than an octave is required. Our approach relies on a high-speed photoconductor and a photonic local oscillator for optoelectronic down-conversion of THz data signals to an intermediate frequency band that is easily accessible by conventional microelectronics. By tuning the frequency of the photonic local oscillator, we can cover a wide range of carrier frequencies between 0.03 THz and 0.34 THz. We demonstrate line rates of up to 10 Gbit/s on a single channel and up to 30 Gbit/s on multiple channels over a distance of 58 m. To the best of our knowledge, our experiments represent the first demonstration of a THz transmission link that exploits optoelectronic signal processing techniques both at the transmitter and the receiver.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
THz-to-Optical Conversion in Wireless Communications Using an Ultra-Broadband Plasmonic Modulator
Authors:
Sandeep Ummethala,
Tobias Harter,
Kira Koehnle,
Zheng Li,
Sascha Muehlbrandt,
Yasar Kutuvantavida,
Juned Kemal,
Jochen Schaefer,
Axel Tessmann,
Suresh Kumar Garlapati,
Andreas Bacher,
Lothar Hahn,
Martin Walther,
Thomas Zwick,
Sebastian Randel,
Wolfgang Freude,
Christian Koos
Abstract:
Future wireless communication networks have to handle data rates of tens or even hundreds of Gbit/s per link, requiring carrier frequencies in the unallocated terahertz (THz) spectrum. In this context, seamless integration of THz links into existing fiber-optic infrastructures is of great importance to complement the inherent portability and flexibility advantages of wireless networks by the relia…
▽ More
Future wireless communication networks have to handle data rates of tens or even hundreds of Gbit/s per link, requiring carrier frequencies in the unallocated terahertz (THz) spectrum. In this context, seamless integration of THz links into existing fiber-optic infrastructures is of great importance to complement the inherent portability and flexibility advantages of wireless networks by the reliable and virtually unlimited capacity of optical transmission systems. On the technological level, this requires novel device and signal processing concepts for direct conversion of data streams between the THz and the optical domains. Here, we report on the first demonstration of a THz link that is seamlessly integrated into a fiber-optic network using direct terahertz-to-optical (T/O) conversion at the wireless receiver. We exploit an ultra-broadband silicon-plasmonic modulator having a 3 dB bandwidth in excess of 0.36 THz for T/O conversion of a 50 Gbit/s data stream that is transmitted on a 0.2885 THz carrier over a 16 m-long wireless link. Optical-to-terahertz (O/T) conversion at the wireless transmitter relies on photomixing in a uni-travelling-carrier photodiode.
△ Less
Submitted 6 November, 2018;
originally announced December 2018.
-
Silicon-plasmonic integrated circuits for terahertz signal generation and coherent detection
Authors:
Tobias Harter,
Sascha Muehlbrandt,
Sandeep Ummethala,
Alexander Schmid,
Lothar Hahn,
Wolfgang Freude,
Christian Koos
Abstract:
Optoelectronic signal processing offers great potential for generation and detection of ultra-broadband waveforms in the THz range, so-called T-waves. However, fabrication of the underlying high-speed photodiodes and photoconductors still relies on complex processes using dedicated III-V semiconductor substrates. This severely limits the application potential of current T-wave transmitters and rec…
▽ More
Optoelectronic signal processing offers great potential for generation and detection of ultra-broadband waveforms in the THz range, so-called T-waves. However, fabrication of the underlying high-speed photodiodes and photoconductors still relies on complex processes using dedicated III-V semiconductor substrates. This severely limits the application potential of current T-wave transmitters and receivers, in particular when it comes to highly integrated systems that combine photonic signal processing with optoelectronic conversion to THz frequencies. In this paper, we demonstrate that these limitations can be overcome by plasmonic internal photoemission detectors (PIPED). PIPED can be realized on the silicon photonic platform and hence allow to leverage the enormous opportunities of the associated device portfolio. In our experiments, we demonstrate both T-wave signal generation and coherent detection at frequencies of up to 1 THz. To proof the viability of our concept, we monolithically integrate a PIPED transmitter and a PIPED receiver on a common silicon photonic chip and use them for measuring the complex transfer impedance of an integrated T-wave device.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
Diamond as a material for monolithically integrated optical and optomechanical devices
Authors:
Patrik Rath,
Sandeep Ummethala,
Christoph Nebel,
Wolfram H. P. Pernice
Abstract:
Diamond provides superior optical and mechanical material properties, making it a prime candidate for the realization of integrated optomechanical circuits. Because diamond sub- strates have matured in size, efficient nanostructuring methods can be used to realize full-scale integrated devices. Here we review optical and mechanical resonators fab- ricated from polycrystalline as well as single cry…
▽ More
Diamond provides superior optical and mechanical material properties, making it a prime candidate for the realization of integrated optomechanical circuits. Because diamond sub- strates have matured in size, efficient nanostructuring methods can be used to realize full-scale integrated devices. Here we review optical and mechanical resonators fab- ricated from polycrystalline as well as single crystalline diamond. We present relevant material properties with respect to implementing optomechanical devices and compare them with other material systems. We give an overview of diamond integrated optomechanical circuits and present the optical readout mechanism and the actuation via optical or electrostatic forces that have been implemented to date. By combining diamond nanophotonic circuits with superconducting nanowires single photons can be efficiently detected on such chips and we outline how future single photon optomechanical circuits can be realized on this platform.
△ Less
Submitted 12 March, 2016;
originally announced March 2016.
-
Diamond electro-optomechanical resonators integrated in nanophotonic circuits
Authors:
P. Rath,
S. Ummethala,
S. Diewald,
G. Lewes-Malandrakis,
D. Brink,
N. Heidrich,
C. Nebel,
W. H. P. Pernice
Abstract:
Diamond integrated photonic devices are promising candidates for emerging applications in nanophotonics and quantum optics. Here we demonstrate active modulation of diamond nanophotonic circuits by exploiting mechanical degrees of freedom in free-standing diamond electro-optomechanical resonators. We obtain high quality factors up to 9600, allowing us to read out the driven nanomechanical response…
▽ More
Diamond integrated photonic devices are promising candidates for emerging applications in nanophotonics and quantum optics. Here we demonstrate active modulation of diamond nanophotonic circuits by exploiting mechanical degrees of freedom in free-standing diamond electro-optomechanical resonators. We obtain high quality factors up to 9600, allowing us to read out the driven nanomechanical response with integrated optical interferometers with high sensitivity. We are able to excite higher order mechanical modes up to 115 MHz and observe the nanomechanical response also under ambient conditions.
△ Less
Submitted 28 October, 2014;
originally announced October 2014.
-
High-Q optomechanical circuits made from polished nanocrystalline diamond thin films
Authors:
S. Ummethala,
P. Rath,
G. Lewes-Malandrakis,
D. Brink,
C. Nebel,
W. H. P. Pernice
Abstract:
We demonstrate integrated optomechanical circuits with high mechanical quality factors prepared from nanocrystalline diamond thin films. Using chemomechanical polishing, the RMS surface roughness of as grown polycrystalline diamond films is reduced below 3nm to allow for the fabrication of high-quality nanophotonic circuits. By integrating free-standing nanomechanical resonators into integrated op…
▽ More
We demonstrate integrated optomechanical circuits with high mechanical quality factors prepared from nanocrystalline diamond thin films. Using chemomechanical polishing, the RMS surface roughness of as grown polycrystalline diamond films is reduced below 3nm to allow for the fabrication of high-quality nanophotonic circuits. By integrating free-standing nanomechanical resonators into integrated optical devices, efficient read-out of the thermomechanical motion of diamond resonators is achieved with on-chip Mach-Zehnder interferometers. Mechanical quality factors up to 28,800 are measured for four-fold clamped optomechanical resonators coupled to the evanescent near-field of nanophotonic waveguides. Our platform holds promise for large-scale integration of optomechanical circuits for on-chip metrology and sensing applications.
△ Less
Submitted 22 March, 2014;
originally announced March 2014.
