-
Unsteady control of supersonic turbulent cavity flow based on resolvent analysis
Authors:
Qiong Liu,
Yiyang Sun,
Chi-An Yeh,
Lawrence S. Ukeiley,
Louis N. Cattafesta III,
Kunihiko Taira
Abstract:
We use resolvent analysis to determine an unsteady active control setup to attenuate pressure fluctuations in turbulent supersonic flow over a rectangular cavity with a length-to-depth ratio of 6 at a Mach number of 1.4 and a Reynolds number based on cavity depth of 10,000. Large-eddy simulations (LES) and dynamic modal decomposition (DMD) of the supersonic cavity flow reveal the dominance of two-…
▽ More
We use resolvent analysis to determine an unsteady active control setup to attenuate pressure fluctuations in turbulent supersonic flow over a rectangular cavity with a length-to-depth ratio of 6 at a Mach number of 1.4 and a Reynolds number based on cavity depth of 10,000. Large-eddy simulations (LES) and dynamic modal decomposition (DMD) of the supersonic cavity flow reveal the dominance of two-dimensional Rossiter modes II and IV. These predominantly two-dimensional vortical structures generate high-amplitude unsteadiness over the cavity through trailing-edge im**ement and create oblique shock waves by obstructing the freestream. To disrupt the undesired formation of vortical structures, we introduce three-dimensional unsteady forcing along the cavity leading edge to generate streamwise vortical structures. Resolvent analysis with respect to the time-averaged base flow is leveraged to determine the optimal combination of forcing frequency and spanwise wavenumber. Instead of selecting the most amplified resolvent forcing modes, we seek the combination of control parameters that yields sustained amplification of the primary resolvent-based kinetic energy distribution over the entire length of the cavity. The sustained amplification is critical to ensure that the selected forcing input remains effective to prevent the formation of the large spanwise vortices. This resolvent-analysis-based flow control guideline is validated with a number of companion LES of the controlled cavity flows. The optimal control setup is verified to be the most effective in reducing the pressure root-mean-square level up to 52% along the aft and bottom cavity walls compared to the baseline cavity flow. The present flow control guideline derived from resolvent analysis should be applicable to flows that require the actuation input to remain effective over an extended region of interest.
△ Less
Submitted 23 March, 2020;
originally announced March 2020.
-
Resolvent analysis of compressible laminar and turbulent cavity flows
Authors:
Yiyang Sun,
Qiong Liu,
Louis N. Cattafesta,
Lawrence S. Ukeiley,
Kunihiko Taira
Abstract:
The present work demonstrates the use of resolvent analysis to obtain physical insights for open-cavity flows. Resolvent analysis identifies the flow response to harmonic forcing, given a steady base state, in terms of the response and forcing modes and the amplification gain. The response and forcing modes reveal the spatial structures associated with this amplification process. In this study, we…
▽ More
The present work demonstrates the use of resolvent analysis to obtain physical insights for open-cavity flows. Resolvent analysis identifies the flow response to harmonic forcing, given a steady base state, in terms of the response and forcing modes and the amplification gain. The response and forcing modes reveal the spatial structures associated with this amplification process. In this study, we perform resolvent analysis on both laminar and turbulent flows over a rectangular cavity with length-to-depth ratio of $L/D=6$ at a free stream Mach number of $M_\infty=0.6$ in a spanwise periodic setting. Based on the dominant instability of the base state, a discount parameter is introduced to resolvent analysis to examine the harmonic characteristics over a finite-time window. We first uncover the underlying flow physics and interpret findings from laminar flow at $Re_D = 502$. These findings from laminar flow are extended to a more practical cavity flow example at a much higher Reynolds number of $Re_D = 10^4$. The features of response and forcing modes from the laminar and turbulent cavity flows are similar to the spatial structures from the laminar analysis. We further find that the large amplification of energy in flow response is associated with high frequency for turbulent flow, while the flow is more responsive to low frequency excitation in the laminar case. These findings from resolvent analysis provide valuable insights for flow control studies with regard to parameter selection and placement of actuators and sensors.
△ Less
Submitted 13 September, 2019;
originally announced September 2019.
-
Spanwise effects on instabilities of compressible flow over a long rectangular cavity
Authors:
Yiyang Sun,
Kunihiko Taira,
Louis N. Cattafesta,
Lawrence S. Ukeiley
Abstract:
The stability properties of two- (2D) and three-dimensional (3D) compressible flows over a rectangular cavity with length-to-depth ratio of $L/D=6$ is analyzed at a free stream Mach number of $M_\infty=0.6$ and depth-based Reynolds number of $Re_D=502$. In this study, we closely examine the influence of three-dimensionality on the wake-mode that has been reported to exhibit high-amplitude fluctuat…
▽ More
The stability properties of two- (2D) and three-dimensional (3D) compressible flows over a rectangular cavity with length-to-depth ratio of $L/D=6$ is analyzed at a free stream Mach number of $M_\infty=0.6$ and depth-based Reynolds number of $Re_D=502$. In this study, we closely examine the influence of three-dimensionality on the wake-mode that has been reported to exhibit high-amplitude fluctuations from the formation and ejection of large-scale spanwise vortices. Direct numerical simulation (DNS) and bi-global stability analysis are utilized to study the instability characteristics of the wake-mode. Using the bi-global stability analysis with the time-average flow as the base state, we capture the global stability properties of the wake-mode at a spanwise wavenumber of $β=0$. To uncover spanwise effects on the 2D wake-mode, 3D DNS are performed with cavity width-to-depth ratio of $W/D=1$ and $2$. We find that the 2D wake-mode is not present in the 3D cavity flow for a wider spanwise setting with $W/D=2$, in which spanwise structures are observed near the rear region of the cavity. These 3D instabilities are further investigated via bi-global stability analysis for spanwise wavelengths of $λ/D=0.5-2.0$ to reveal the eigenspectra of the 3D eigenmodes. Based on the findings of 2D and 3D global stability analysis, we conclude that the absence of the wake-mode in 3D rectangular cavity flows is due to the release of kinetic energy from the spanwise vortices to the streamwise vortical structures that develops from the spanwise instabilities.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
Effects of sidewalls and leading-edge blowing on flows over long rectangular cavities
Authors:
Yiyang Sun,
Qiong Liu,
Louis N. Cattafesta,
Lawrence S. Ukeiley,
Kunihiko Taira
Abstract:
The present work investigates sidewall effects on the characteristics of three-dimensional (3D) compressible flows over a rectangular cavity with aspect ratios of $L/D=6$ and $W/D=2$ at $Re_D=10^4$ using large eddy simulations (LES). For the spanwise-periodic cavity flow, large pressure fluctuations are present in the shear layer and on the cavity aft wall due to spanwise vortex roll-ups and flow…
▽ More
The present work investigates sidewall effects on the characteristics of three-dimensional (3D) compressible flows over a rectangular cavity with aspect ratios of $L/D=6$ and $W/D=2$ at $Re_D=10^4$ using large eddy simulations (LES). For the spanwise-periodic cavity flow, large pressure fluctuations are present in the shear layer and on the cavity aft wall due to spanwise vortex roll-ups and flow im**ement. For the finite-span cavity with sidewalls, pressure fluctuations are reduced due to interference to the vortex roll-ups from the sidewalls. Flow oscillations are also reduced by increasing the Mach number from 0.6 to 1.4. Furthermore, secondary flow inside the cavity enhances kinetic energy transport in the spanwise direction. Moreover, 3D slotted jets are placed along the cavity leading edge with the objective of reducing flow oscillations. Steady blowing into the boundary layer is considered with momentum coefficient $C_μ=0.0584$ and $0.0194$ for $M_\infty=0.6$ and $1.4$ cases, respectively. The three-dimensionality introduced to the flow by the jets inhibits large coherent roll-ups of the spanwise vortices in the shear layer, yielding $9-40\%$ reductions in rms pressure and rms velocity for both spanwise-periodic and finite-span cavities.
△ Less
Submitted 2 May, 2018;
originally announced May 2018.
-
Biglobal instabilities of compressible open-cavity flows
Authors:
Y. Sun,
K. Taira,
L. N. Cattafesta III,
L. S. Ukeiley
Abstract:
The stability characteristics of compressible spanwise-periodic open-cavity flows are investigated with direct numerical simulation and biglobal stability analysis for rectangular cavities with aspect ratios of $L/D=2$ and 6. This study examines the behavior of instabilities with respect to stable/unstable steady states in the laminar regimes for subsonic and transonic conditions where compressibi…
▽ More
The stability characteristics of compressible spanwise-periodic open-cavity flows are investigated with direct numerical simulation and biglobal stability analysis for rectangular cavities with aspect ratios of $L/D=2$ and 6. This study examines the behavior of instabilities with respect to stable/unstable steady states in the laminar regimes for subsonic and transonic conditions where compressibility plays an important role. It is observed that an increase in Mach number destabilizes the flow in the subsonic regime and stabilizes the flow in the transonic regime. Biglobal stability analysis is conducted to extract 2D and 3D eigenmodes for prescribed spanwise wavelengths about the 2D steady state. The properties of 2D eigenmodes agree well with those observed in the 2D nonlinear simulations. In the analysis of 3D eigenmodes, it is found that an increase of Mach number stabilizes dominant 3D eigenmodes. For a short cavity with $L/D=2$, the 3D eigenmodes primarily stem from centrifugal instabilities. For a long cavity with $L/D=6$, other types of eigenmodes appear whose structures extend from the aft-region to the mid-region of the cavity. A selected number of 3D DNS are performed at $M_\infty=0.6$. For $L/D=2$, the properties of 3D structures present in the 3D nonlinear flow correspond closely to those obtained from linear stability analysis. However, for $L/D=6$, the 3D eigenmodes cannot be clearly observed in the 3D DNS, due to the strong nonlinearity that develops over the length of the cavity. In addition, it is noted that three-dimensionality in the flow helps alleviate violent oscillations for the long cavity. The analysis performed in this paper can provide valuable insights for designing effective flow control strategies to suppress undesirable aerodynamic and pressure fluctuations in compressible open-cavity flows.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Modal Analysis of Fluid Flows: An Overview
Authors:
Kunihiko Taira,
Steven L. Brunton,
Scott T. M. Dawson,
Clarence W. Rowley,
Tim Colonius,
Beverley J. McKeon,
Oliver T. Schmidt,
Stanislav Gordeyev,
Vassilios Theofilis,
Lawrence S. Ukeiley
Abstract:
Simple aerodynamic configurations under even modest conditions can exhibit complex flows with a wide range of temporal and spatial features. It has become common practice in the analysis of these flows to look for and extract physically important features, or modes, as a first step in the analysis. This step typically starts with a modal decomposition of an experimental or numerical dataset of the…
▽ More
Simple aerodynamic configurations under even modest conditions can exhibit complex flows with a wide range of temporal and spatial features. It has become common practice in the analysis of these flows to look for and extract physically important features, or modes, as a first step in the analysis. This step typically starts with a modal decomposition of an experimental or numerical dataset of the flow field, or of an operator relevant to the system. We describe herein some of the dominant techniques for accomplishing these modal decompositions and analyses that have seen a surge of activity in recent decades. For a non-expert, kee** track of recent developments can be daunting, and the intent of this document is to provide an introduction to modal analysis that is accessible to the larger fluid dynamics community. In particular, we present a brief overview of several of the well-established techniques and clearly lay the framework of these methods using familiar linear algebra. The modal analysis techniques covered in this paper include the proper orthogonal decomposition (POD), balanced proper orthogonal decomposition (Balanced POD), dynamic mode decomposition (DMD), Koopman analysis, global linear stability analysis, and resolvent analysis.
△ Less
Submitted 9 August, 2017; v1 submitted 5 February, 2017;
originally announced February 2017.
