-
Hardware Implementation of an OPC UA Server for Industrial Field Devices
Authors:
Heiner Bauer,
Sebastian Höppner,
Chris Iatrou,
Zohra Charania,
Stephan Hartmann,
Saif-Ur Rehman,
Andreas Dixius,
Georg Ellguth,
Dennis Walter,
Johannes Uhlig,
Felix Neumärker,
Marc Berthel,
Marco Stolba,
Florian Kelber,
Leon Urbas,
Christian Mayr
Abstract:
Industrial plants suffer from a high degree of complexity and incompatibility in their communication infrastructure, caused by a wild mix of proprietary technologies. This prevents transformation towards Industry 4.0 and the Industrial Internet of Things. Open Platform Communications Unified Architecture (OPC UA) is a standardized protocol that addresses these problems with uniform and semantic co…
▽ More
Industrial plants suffer from a high degree of complexity and incompatibility in their communication infrastructure, caused by a wild mix of proprietary technologies. This prevents transformation towards Industry 4.0 and the Industrial Internet of Things. Open Platform Communications Unified Architecture (OPC UA) is a standardized protocol that addresses these problems with uniform and semantic communication across all levels of the hierarchy. However, its adoption in embedded field devices, such as sensors and actors, is still lacking due to prohibitive memory and power requirements of software implementations. We have developed a dedicated hardware engine that offloads processing of the OPC UA protocol and enables realization of compact and low-power field devices with OPC UA support. As part of a proof-of-concept embedded system we have implemented this engine in a 22 nm FDSOI technology. We measured performance, power consumption, and memory footprint of our test chip and compared it with a software implementation based on open62541 and a Raspberry Pi 2B. Our OPC UA hardware engine is 50 times more energy efficient and only requires 36 KiB of memory. The complete chip consumes only 24 mW under full load, making it suitable for low-power embedded applications.
△ Less
Submitted 3 May, 2021;
originally announced May 2021.
-
Origin of vibrational wavepacket dynamics in Fe carbene photosensitizer determined with femtosecond X-ray emission and scattering
Authors:
Kristjan Kunnus,
Morgane Vacher,
Tobias C. B. Harlang,
Kasper S. Kjær,
Kristoffer Haldrup,
Elisa Biasin,
Tim B. van Driel,
Mátyás Pápa,
Pavel Chabera,
Yizhu Liu,
Hideyuki Tatsuno,
Cornelia Timm,
Erik Källman,
Mickaël Delcey,
Robert W. Hartsock,
Marco E. Reinhard,
Sergey Koroidov,
Mads G. Laursen,
Frederik B. Hansen,
Peter Vester,
Morten Christensen,
Lise Sandberg,
Zoltán Németh,
Dorottya Sárosiné Szemes,
Éva Bajnóczi
, et al. (16 additional authors not shown)
Abstract:
Disentangling the dynamics of electrons and nuclei during nonadiabatic molecular transformations remains a considerable experimental challenge. Here we have investigated photoinduced electron transfer dynamics following a metal-to-ligand charge-transfer (MLCT) excitation of the [Fe(bmip)2]2+ photosensitizer, where bmip = 2,6-bis(3-methyl-imidazole-1- ylidine)-pyridine, with simultaneous femtosecon…
▽ More
Disentangling the dynamics of electrons and nuclei during nonadiabatic molecular transformations remains a considerable experimental challenge. Here we have investigated photoinduced electron transfer dynamics following a metal-to-ligand charge-transfer (MLCT) excitation of the [Fe(bmip)2]2+ photosensitizer, where bmip = 2,6-bis(3-methyl-imidazole-1- ylidine)-pyridine, with simultaneous femtosecond-resolution Fe Kα and K\b{eta} X-ray Emission Spectroscopy (XES) and Wide Angle X-ray Scattering (WAXS). This measurement clearly shows temporal oscillations in the XES and WAXS difference signals with the same 278 fs period oscillation. The oscillatory signal originates from an Fe-ligand stretching mode vibrational wavepacket on a triplet metal-centered (3MC) excited state surface. The vibrational wavepacket is created by 40% of the excited population that undergoes electron transfer from the non-equilibrium MLCT excited state to the 3MC excited state with a 110 fs time constant, while the other 60% relaxes to a 3MLCT excited state in parallel. The sensitivity of the Kα XES spectrum to molecular structure results from core-level vibronic coupling, due to a 0.7% average Fe-ligand bond length difference in the lowest energy geometry of the 1s and 2p core-ionized states. These results highlight the importance of vibronic effects in time-resolved XES experiments and demonstrate the role of metal-centered excited states in the electronic excited state relaxation dynamics of an Fe carbene photosensitizer.
△ Less
Submitted 29 October, 2019;
originally announced October 2019.
-
First application of superconducting transition-edge-sensor microcalorimeters to hadronic-atom x-ray spectroscopy
Authors:
S. Okada,
D. A. Bennett,
C. Curceanu,
W. B. Doriese,
J. W. Fowler,
J. Gard,
F. P. Gustafsson,
T. Hashimoto,
R. S. Hayano,
S. Hirenzaki,
J. P. Hays-Wehle,
G. C. Hilton,
N. Ikeno,
M. Iliescu,
S. Ishimoto,
K. Itahashi,
M. Iwasaki,
T. Koike,
K. Kuwabara,
Y. Ma,
J. Marton,
H. Noda,
G. C. O'Neil,
H. Outa,
C. D. Reintsema
, et al. (13 additional authors not shown)
Abstract:
High-resolution pionic-atom x-ray spectroscopy was performed with an x-ray spectrometer based on a 240-pixel array of superconducting transition-edge-sensor (TES) microcalorimeters at the piM1 beam line of the Paul Scherrer Institute. X-rays emitted by pionic carbon via the 4f->3d transition and the parallel 4d->3p transition were observed with a full-width-at-half-maximum energy resolution of 6.8…
▽ More
High-resolution pionic-atom x-ray spectroscopy was performed with an x-ray spectrometer based on a 240-pixel array of superconducting transition-edge-sensor (TES) microcalorimeters at the piM1 beam line of the Paul Scherrer Institute. X-rays emitted by pionic carbon via the 4f->3d transition and the parallel 4d->3p transition were observed with a full-width-at-half-maximum energy resolution of 6.8 eV at 6.4 keV. Measured x-ray energies are consistent with calculated electromagnetic values which considered the strong-interaction effect assessed via the Seki-Masutani potential for the 3p energy level, and favor the electronic population of two filled 1s electrons in the K-shell. Absolute energy calibration with an uncertainty of 0.1 eV was demonstrated under a high-rate hadron beam condition of 1.45 MHz. This is the first application of a TES spectrometer to hadronic-atom x-ray spectroscopy and is an important milestone towards next-generation high-resolution kaonic-atom x-ray spectroscopy.
△ Less
Submitted 18 August, 2016;
originally announced August 2016.
-
Femtosecond X-Ray Scattering Study of Ultrafast Photoinduced Structural Dynamics in Solvated [Co(terpy)2]2+
Authors:
Elisa Biasin,
Tim Brandt van Driel,
Kasper S. Kjær,
Asmus O. Dohn,
Morten Christensen,
Tobias Harlang,
Pavel Chabera,
Yizhu Liu,
Jens Uhlig,
Mátyás Pápai,
Zoltán Németh,
Robert Hartsock,
Winnie Liang,
Jianxin Zhang,
Roberto Alonso-Mori,
Matthieu Chollet,
James M. Glownia,
Silke Nelson,
Dimosthenis Sokaras,
Tadesse A. Assefa,
Alexander Britz,
Andreas Galler,
Wojciech Gawelda,
Christian Bressler,
Kelly J. Gaffney
, et al. (8 additional authors not shown)
Abstract:
We study the structural dynamics of photoexcited [Co(terpy)2]2+ in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows that the photoexcitation event leads to elongation of the Co-N bonds, followed by coherent Co-N bond length oscillations ari…
▽ More
We study the structural dynamics of photoexcited [Co(terpy)2]2+ in an aqueous solution with ultrafast x-ray diffuse scattering experiments conducted at the Linac Coherent Light Source. Through direct comparisons with density functional theory calculations, our analysis shows that the photoexcitation event leads to elongation of the Co-N bonds, followed by coherent Co-N bond length oscillations arising from the impulsive excitation of a vibrational mode dominated by the symmetrical stretch of all six Co-N bonds. This mode has a period of 0.33 ps and decays on a subpicosecond time scale. We find that the equilibrium bond-elongated structure of the high spin state is established on a single-picosecond time scale and that this state has a lifetime of ~ 7 ps.
△ Less
Submitted 6 July, 2016;
originally announced July 2016.
-
Absolute Energy Calibration of X-ray TESs with 0.04 eV Uncertainty at 6.4 keV in a Hadron-Beam Environment
Authors:
H. Tatsuno,
W. B. Doriese,
D. A. Bennett,
C. Curceanu,
J. W. Fowler,
J. Gard,
F. P. Gustafsson,
T. Hashimoto,
R. S. Hayano,
J. P. Hays-Wehle,
G. C. Hilton,
M. Iliescu,
S. Ishimoto,
K. Itahashi,
M. Iwasaki,
K. Kuwabara,
Y. Ma,
J. Marton,
H. Noda,
G. C. O'Neil,
S. Okada,
H. Outa,
C. D. Reintsema,
M. Sato,
D. R. Schmidt
, et al. (9 additional authors not shown)
Abstract:
A performance evaluation of superconducting transition-edge sensors (TESs) in the environment of a pion beam line at a particle accelerator is presented. Averaged across the 209 functioning sensors in the array, the achieved energy resolution is 5.2 eV FWHM at Co $K_α$ (6.9 keV) when the pion beam is off and 7.3 eV at a beam rate of 1.45 MHz. Absolute energy uncertainty of $\pm$0.04 eV is demonstr…
▽ More
A performance evaluation of superconducting transition-edge sensors (TESs) in the environment of a pion beam line at a particle accelerator is presented. Averaged across the 209 functioning sensors in the array, the achieved energy resolution is 5.2 eV FWHM at Co $K_α$ (6.9 keV) when the pion beam is off and 7.3 eV at a beam rate of 1.45 MHz. Absolute energy uncertainty of $\pm$0.04 eV is demonstrated for Fe $K_α$ (6.4 keV) with in-situ energy calibration obtained from other nearby known x-ray lines. To achieve this small uncertainty, it is essential to consider the non-Gaussian energy response of the TESs and thermal cross-talk pile-up effects due to charged-particle hits in the silicon substrate of the TES array.
△ Less
Submitted 13 January, 2016;
originally announced January 2016.
-
Observation of Plasma-Undulator Harmonics from a Laser Wakefield Accelerator
Authors:
G. Genoud,
K. Cassou,
F. Wojda,
M. Burza,
C. Kamperidis,
A. Persson,
J. Uhlig,
O. Lundh,
S. Kneip,
S. P. D. Mangles,
H. Ferrari,
A. Lifschitz,
B. Cros,
C. -G. Wahlström
Abstract:
This paper has been withdrawn by the author. An assumption made in the analysis is not valid under the experimental conditions.
This paper has been withdrawn by the author. An assumption made in the analysis is not valid under the experimental conditions.
△ Less
Submitted 9 March, 2010; v1 submitted 4 December, 2009;
originally announced December 2009.
-
Bayesian Approach to Inverse Quantum Statistics: Reconstruction of Potentials in the Feynman Path Integral Representation of Quantum Theory
Authors:
J. C. Lemm,
J. Uhlig,
A. Weiguny
Abstract:
The Feynman path integral representation of quantum theory is used in a non--parametric Bayesian approach to determine quantum potentials from measurements on a canonical ensemble. This representation allows to study explicitly the classical and semiclassical limits and provides a unified description in terms of functional integrals: the Feynman path integral for the statistical operator, and th…
▽ More
The Feynman path integral representation of quantum theory is used in a non--parametric Bayesian approach to determine quantum potentials from measurements on a canonical ensemble. This representation allows to study explicitly the classical and semiclassical limits and provides a unified description in terms of functional integrals: the Feynman path integral for the statistical operator, and the integration over the space of potentials for calculating the predictive density. The latter is treated in maximum a posteriori approximation, and various approximation schemes for the former are developed and discussed. A simple numerical example shows the applicability of the method.
△ Less
Submitted 23 December, 2003;
originally announced December 2003.
-
Bayesian Inverse Quantum Theory
Authors:
J. C. Lemm,
J. Uhlig
Abstract:
A Bayesian approach is developed to determine quantum mechanical potentials from empirical data. Bayesian methods, combining empirical measurements and "a priori" information, provide flexible tools for such empirical learning problems. The paper presents the basic theory, concentrating in particular on measurements of particle coordinates in quantum mechanical systems at finite temperature. The…
▽ More
A Bayesian approach is developed to determine quantum mechanical potentials from empirical data. Bayesian methods, combining empirical measurements and "a priori" information, provide flexible tools for such empirical learning problems. The paper presents the basic theory, concentrating in particular on measurements of particle coordinates in quantum mechanical systems at finite temperature. The computational feasibility of the approach is demonstrated by numerical case studies. Finally, it is shown how the approach can be generalized to such many-body and few-body systems for which a mean field description is appropriate. This is done by means of a Bayesian inverse Hartree-Fock approximation.
△ Less
Submitted 6 June, 2000;
originally announced June 2000.
-
Bayesian Reconstruction of Approximately Periodic Potentials at Finite Temperature
Authors:
J. C. Lemm,
J. Uhlig,
A. Weiguny
Abstract:
The paper discusses the reconstruction of potentials for quantum systems at finite temperatures from observational data. A nonparametric approach is developed, based on the framework of Bayesian statistics, to solve such inverse problems. Besides the specific model of quantum statistics giving the probability of observational data, a Bayesian approach is essentially based on "a priori" informati…
▽ More
The paper discusses the reconstruction of potentials for quantum systems at finite temperatures from observational data. A nonparametric approach is developed, based on the framework of Bayesian statistics, to solve such inverse problems. Besides the specific model of quantum statistics giving the probability of observational data, a Bayesian approach is essentially based on "a priori" information available for the potential. Different possibilities to implement "a priori" information are discussed in detail, including hyperparameters, hyperfields, and non--Gaussian auxiliary fields. Special emphasis is put on the reconstruction of potentials with approximate periodicity. The feasibility of the approach is demonstrated for a numerical model.
△ Less
Submitted 29 May, 2000;
originally announced May 2000.
-
Hartree-Fock Approximation for Inverse Many-Body Problems
Authors:
J. C. Lemm,
J. Uhlig
Abstract:
A new method is presented to reconstruct the potential of a quantum mechanical many-body system from observational data, combining a nonparametric Bayesian approach with a Hartree-Fock approximation. A priori information is implemented as a stochastic process, defined on the space of potentials. The method is computationally feasible and provides a general framework to treat inverse problems for…
▽ More
A new method is presented to reconstruct the potential of a quantum mechanical many-body system from observational data, combining a nonparametric Bayesian approach with a Hartree-Fock approximation. A priori information is implemented as a stochastic process, defined on the space of potentials. The method is computationally feasible and provides a general framework to treat inverse problems for quantum mechanical many-body systems.
△ Less
Submitted 18 August, 1999;
originally announced August 1999.
-
A Bayesian Approach to Inverse Quantum Statistics
Authors:
J. C. Lemm,
J. Uhlig,
A. Weiguny
Abstract:
A nonparametric Bayesian approach is developed to determine quantum potentials from empirical data for quantum systems at finite temperature. The approach combines the likelihood model of quantum mechanics with a priori information over potentials implemented in form of stochastic processes. Its specific advantages are the possibilities to deal with heterogeneous data and to express a priori inf…
▽ More
A nonparametric Bayesian approach is developed to determine quantum potentials from empirical data for quantum systems at finite temperature. The approach combines the likelihood model of quantum mechanics with a priori information over potentials implemented in form of stochastic processes. Its specific advantages are the possibilities to deal with heterogeneous data and to express a priori information explicitly, i.e., directly in terms of the potential of interest. A numerical solution in maximum a posteriori approximation was feasible for one--dimensional problems. Using correct a priori information turned out to be essential.
△ Less
Submitted 1 July, 1999;
originally announced July 1999.
-
Mean Field Methods for Atomic and Nuclear Reactions: The Link between Time--Dependent and Time--Independent Approaches
Authors:
J. Uhlig,
J. C. Lemm,
A. Weiguny
Abstract:
Three variants of mean field methods for atomic and nuclear reactions are compared with respect to both conception and applicability: The time--dependent Hartree--Fock method solves the equation of motion for a Hermitian density operator as initial value problem, with the colliding fragments in a continuum state of relative motion. With no specification of the final state, the method is restrict…
▽ More
Three variants of mean field methods for atomic and nuclear reactions are compared with respect to both conception and applicability: The time--dependent Hartree--Fock method solves the equation of motion for a Hermitian density operator as initial value problem, with the colliding fragments in a continuum state of relative motion. With no specification of the final state, the method is restricted to inclusive reactions. The time--dependent mean field method, as developed by Kerman, Levit and Negele as well as by Reinhardt, calculates the density for specific transitions and thus applies to exclusive reactions. It uses the Hubbard--Stratonovich transformation to express the full time--development operator with two--body interactions as functional integral over one--body densities. In stationary phase approximation and with Slater determinants as initial and final states, it defines non--Hermitian, time--dependent mean field equations to be solved self--consistently as boundary value problem in time. The time--independent mean field method of Giraud and Nagarajan is based on a Schwinger--type variational principle for the resolvent. It leads to a set of inhomogeneous, non--Hermitian equations of Hartree--Fock type to be solved for given total energy. All information about initial and final channels is contained in the inhomogeneities, hence the method is designed for exclusive reactions. A direct link is established between the time--dependent and time--independent versions. Their relation is non--trivial due to the non--linear nature of mean field methods.
△ Less
Submitted 26 June, 1998;
originally announced June 1998.
