-
Achieving increased Phasor POD performance by introducing a Control-Input Model
Authors:
Hallvar Haugdal,
Kjetil Uhlen,
Hjörtur Jóhannsson
Abstract:
In this paper, an enhancement to the well known Phasor Power Oscillation Damper is proposed, aiming to increase its performance. Fundamental to the functioning of this controller is the estimation of a phasor representing oscillatory behaviour at a particular frequency in a measured signal. The phasor is transformed to time domain and applied as a setpoint signal to a controllable device. The cont…
▽ More
In this paper, an enhancement to the well known Phasor Power Oscillation Damper is proposed, aiming to increase its performance. Fundamental to the functioning of this controller is the estimation of a phasor representing oscillatory behaviour at a particular frequency in a measured signal. The phasor is transformed to time domain and applied as a setpoint signal to a controllable device. The contribution in this paper specifically targets the estimation algorithm of the controller: It is found that increased estimation accuracy and thereby enhanced dam** performance can be achieved by introducing a prediction-correction scheme for the estimator, in the form of a Kalman Filter. The prediction of the phasor at the next step is performed based on the control signal that is applied at the current step. This enables more precise dam** of the targeted mode.
The presented results, which are obtained from simulations on a Single-Machine Infinite Bus system and the IEEE 39-Bus system, indicate that the proposed enhancement improves the performance of this type of controller.
△ Less
Submitted 9 November, 2021; v1 submitted 1 November, 2021;
originally announced November 2021.
-
An Open Source Power System Simulator in Python for Efficient Prototy** of WAMPAC Applications
Authors:
Hallvar Haugdal,
Kjetil Uhlen
Abstract:
An open source software package for performing dynamic RMS simulation of small to medium-sized power systems is presented, written entirely in the Python programming language. The main objective is to facilitate fast prototy** of new wide area monitoring, control and protection applications for the future power system by enabling seamless integration with other tools available for Python in the…
▽ More
An open source software package for performing dynamic RMS simulation of small to medium-sized power systems is presented, written entirely in the Python programming language. The main objective is to facilitate fast prototy** of new wide area monitoring, control and protection applications for the future power system by enabling seamless integration with other tools available for Python in the open source community, e.g. for signal processing, artificial intelligence, communication protocols etc. The focus is thus transparency and expandability rather than computational efficiency and performance. The main purpose of this paper, besides presenting the code and some results, is to share interesting experiences with the power system community, and thus stimulate wider use and further development. Two interesting conclusions at the current stage of development are as follows: First, the simulation code is fast enough to emulate real-time simulation for small and medium-size grids with a time step of 5 ms, and allows for interactive feedback from the user during the simulation. Second, the simulation code can be uploaded to an online Python interpreter, edited, run and shared with anyone with a compatible internet browser. Based on this, we believe that the presented simulation code could be a valuable tool, both for researchers in early stages of prototy** real-time applications, and in the educational setting, for students develo** intuition for concepts and phenomena through real-time interaction with a running power system model.
△ Less
Submitted 8 January, 2021;
originally announced January 2021.
-
Nonlinear Model Predictive Control of Variable Speed Hydropower for Provision of Fast Frequency Reserves
Authors:
Tor Inge Reigstad,
Kjetil Uhlen
Abstract:
This paper presents the development of a non-linear model predictive controller (MPC) for controlling variable speed hydropower (VSHP) plants. The MPC coordinates the turbine controller with the virtual synchronous generator (VSG) control of the power electronics converter to optimize the plant's performance. The main objective is to deliver a fast power response to frequency deviations by utilizi…
▽ More
This paper presents the development of a non-linear model predictive controller (MPC) for controlling variable speed hydropower (VSHP) plants. The MPC coordinates the turbine controller with the virtual synchronous generator (VSG) control of the power electronics converter to optimize the plant's performance. The main objective is to deliver a fast power response to frequency deviations by utilizing the kinetic energy of the turbine and generator. This is made possible by allowing the turbine rotational speed to deviate temporarily from its optimal speed. In addition, the efficiency should be maximized while kee** the electric and hydraulic variables within their constraints. The simulation results show that the proposed MPC is also able to damp power oscillations in the grid, reduce water hammering in the penstock and improve the future estimation of turbine head, turbine power and turbine flow. This ensures that the turbine head does not exceed its limits and that the overshoot in the turbine speed after a disturbance is reduced. Besides, the VSG converter control enables a fast power response by utilizing the rotational energy of the turbine and generator. Thereby, the VSHP can provide a significant amount of fast frequency reserves (FFR) to the grid.
△ Less
Submitted 3 June, 2020;
originally announced June 2020.
-
Variable speed hydropower plant with virtual inertia control for provision of fast frequency reserves
Authors:
Tor Inge Reigstad,
Kjetil Uhlen
Abstract:
In this paper, five virtual inertia control structures are implemented and tested on a variable speed hydropower (VSHP) plant. The results show that all five can deliver fast power reserves to maintain grid stability after disturbances after a disturbance. The VSHP is well suited for the purposed since its output power can be changed almost instantaneously by utilizing the rotational energy of the…
▽ More
In this paper, five virtual inertia control structures are implemented and tested on a variable speed hydropower (VSHP) plant. The results show that all five can deliver fast power reserves to maintain grid stability after disturbances after a disturbance. The VSHP is well suited for the purposed since its output power can be changed almost instantaneously by utilizing the rotational energy of the turbine and generator. This will cause the turbine rotational speed to deviate from its optimal value temporarily. Then the governor control will regain the turbine rotational speed by controlling the guide vane opening and thereby the turbine flow and mechanical power. With that, the VSHP output power can be changed permanently to contribute with primarily frequency reserves. Dynamic and eigenvalue analyses are performed to compare five different versions of the basic VSG and VSM control structures; VSG, power-frequency PID-controller with permanent droop (VSG-PID), VSM, VSM with power-frequency PD-controller (VSM-PD), and VSM with power-frequency PID-controller and permanent droop (VSM-PID). They are evaluated by two main criteria; their ability to deliver instantaneous power (inertia) to reduce the rate of change of frequency (ROCOF) and their contribution to frequency containment control (steady-state frequency droop response)
△ Less
Submitted 18 March, 2020; v1 submitted 16 March, 2020;
originally announced March 2020.
-
Modelling of Variable Speed Hydropower for Grid Integration Studies
Authors:
Tor Inge Reigstad,
Kjetil Uhlen
Abstract:
This paper proposes a hydraulic model based on the Euler turbine equations suitable for the purpose of grid integration studies of variable speed hydropower (VSHP). The work was motivated by the need to assess how the dynamic performance might change when a hydropower plant is operated at variable speed. The Euler model considers the water flow dependency on the turbine rotational speed and calcul…
▽ More
This paper proposes a hydraulic model based on the Euler turbine equations suitable for the purpose of grid integration studies of variable speed hydropower (VSHP). The work was motivated by the need to assess how the dynamic performance might change when a hydropower plant is operated at variable speed. The Euler model considers the water flow dependency on the turbine rotational speed and calculates the turbine power as a non-linear function of water flow, turbine rotational speed and guide vane opening. A waterway model is included, based on the 1-D momentum and continuity balance for a water-filled elementary pipe to simulate water hammer, mass oscillation and tunnel losses. These detailed and accurate models are necessary for recognising possible limitations in the hydraulic system, to model the turbine power and rotational speed correctly and thereby to be able to maximise power delivery for system control purposes. All Euler model parameters can be derived from the physical dimensions of the turbine and waterway, ensuring easy implementation. State-space representation of the Euler model is approximated by utilising a lumped-parameter equivalent of the penstock dynamics. Dynamic simulations and eigenvalue analysis show the strength of the Euler model compared to conventional hydropower models.
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
Optimized Control of Variable Speed Hydropower for Provision of Fast Frequency Reserves
Authors:
Tor Inge Reigstad,
Kjetil Uhlen
Abstract:
This paper deals with the design of controllers for variable speed hydropower (VSHP) plants with the objective of optimize the plants' performance. The control objectives imply enabling fast responses to frequency deviations while kee** the electric and hydraulic variables within their constraints. A model predictive controller (MPC) was developed to coordinate the turbine controller with the vi…
▽ More
This paper deals with the design of controllers for variable speed hydropower (VSHP) plants with the objective of optimize the plants' performance. The control objectives imply enabling fast responses to frequency deviations while kee** the electric and hydraulic variables within their constraints. A model predictive controller (MPC) was developed to coordinate the turbine controller with the virtual synchronous generator (VSG) control of the power electronics converter. The simulation results show that the VSG is able to deliver fast power responses by utilizing the rotational energy of the turbine and the generator. The MPC controls the guide vane opening of the turbine to regain the nominal turbine rotational speed. If this is not possible due to the constraints of the hydraulic system, the MPC adjusts the power output of the VSHP by changing the VSG power reference. The proposed control system allows the VSHP to provide fast frequency reserves (FFR).
△ Less
Submitted 13 March, 2020;
originally announced March 2020.
-
Mode Shape Estimation using Complex Principal Component Analysis and k-Means Clustering
Authors:
Hallvar Haugdal,
Kjetil Uhlen
Abstract:
We propose an empirical method for identifying low damped modes and corresponding mode shapes using frequency measurements from a Wide Area Monitoring System. The method consists of two main steps: Firstly, Complex Principal Component Analysis is used in combination with the Hilbert Transform and Empirical Mode Decomposition to provide estimates of modes and mode shapes. The estimates are stored a…
▽ More
We propose an empirical method for identifying low damped modes and corresponding mode shapes using frequency measurements from a Wide Area Monitoring System. The method consists of two main steps: Firstly, Complex Principal Component Analysis is used in combination with the Hilbert Transform and Empirical Mode Decomposition to provide estimates of modes and mode shapes. The estimates are stored as multidimensional points. Secondly, the points are grouped using a clustering algorithm, and new averaged estimates of modes and mode shapes are computed as the centroids of the clusters. Applying the method on data resulting from a non-linear power system simulator yields estimates of dominant modes and corresponding mode shapes that are similar to those resulting from modal analysis of the linearized system model. Encouraged by the results, the method is further tested with real PMU data at transmission grid level. Initial results indicate that the performance of the proposed method is promising.
△ Less
Submitted 1 February, 2021; v1 submitted 7 December, 2018;
originally announced December 2018.
-
Optimisation of energy and exergy of two-spool turbofan engines using genetic algorithms
Authors:
Vin Cent Tai,
Phen Chiak See,
Cristinel Mares,
Kjetil Uhlen
Abstract:
This paper presents an application of Genetic Algorithm (GA) metaheuristics to optimise the design of two-spool turbofan engines based on exergy and energy theories. The GA is used to seek the optimal values of eight parameters that define the turbofan engine. These parameters are encoded as chromosomes (a metaphor) in GA. A computer program called TurboJet-Engine Optimizer v1.0 (TJEO-1.0) was dev…
▽ More
This paper presents an application of Genetic Algorithm (GA) metaheuristics to optimise the design of two-spool turbofan engines based on exergy and energy theories. The GA is used to seek the optimal values of eight parameters that define the turbofan engine. These parameters are encoded as chromosomes (a metaphor) in GA. A computer program called TurboJet-Engine Optimizer v1.0 (TJEO-1.0) was developed by the authors to perform calculations of thermodynamic properties of the engine and implement the optimisations. The caloric properties of the working fluids are obtained by using an 8th-order polynomial fluid model taken from an existing literature. The turbo-mechanical components in the turbofan engine are as well assumed to exhibit polytropic efficiencies of today's technology level. The TJEO-1.0 is integrated with Pyevolve, an open source GA optimisation framework built for used with Python programming language. The optimal design created by TJEO-1.0 was evaluated with the following criteria: (1.) energy efficiency, (2.) exergy efficiency, and (3.) combination of both of them. The results suggest that the design of turbofan engine optimised based on the third criterion is able to produce higher specific thrust (by more than 30 %), compared with the ones optimised based on the first and the second criteria.
△ Less
Submitted 3 July, 2012;
originally announced July 2012.
-
Enhanced active power filter control for nonlinear non-stationary reactive power compensation
Authors:
Phen Chiak See,
Vin Cent Tai,
Marta Molinas,
Kjetil Uhlen,
Olav Bjarte Fosso
Abstract:
This paper describes a method to implement Reactive Power Compensation (RPC) in power systems that possess nonlinear non-stationary current disturbances. The Empirical Mode Decomposition (EMD) introduced in the Hilbert-Huang Transform (HHT) is used to separate the disturbances from the original current waveform. These disturbances are subsequently removed. Following that, Power Factor Correction (…
▽ More
This paper describes a method to implement Reactive Power Compensation (RPC) in power systems that possess nonlinear non-stationary current disturbances. The Empirical Mode Decomposition (EMD) introduced in the Hilbert-Huang Transform (HHT) is used to separate the disturbances from the original current waveform. These disturbances are subsequently removed. Following that, Power Factor Correction (PFC) based on the well-known p-q power theory is conducted to remove the reactive power. Both operations were implemented in a shunt Active Power Filter (APF). The EMD significantly simplifies the singulation and the removal of the current disturbances. This helps to effectively identify the fundamental current waveform. Hence, it simplifies the implementation of RPC on nonlinear non-stationary power systems.
△ Less
Submitted 19 June, 2012;
originally announced June 2012.
-
Performance assessment of two active power filter control strategies in the presence of non-stationary currents
Authors:
Vin Cent Tai,
Phen Chiak See,
Marta Molinas,
Kjetil Uhlen
Abstract:
This paper describes an active power filter (APF) control strategy, which eliminates harmonics and compensates reactive power in a three-phase four-wire power system supplying non-linear unbalanced loads in the presence of non-linear non-stationary currents. Empirical Mode Decomposition (EMD) technique developed as part of the Hilbert-Huang Transform (HHT) is used to singulate the harmonics and no…
▽ More
This paper describes an active power filter (APF) control strategy, which eliminates harmonics and compensates reactive power in a three-phase four-wire power system supplying non-linear unbalanced loads in the presence of non-linear non-stationary currents. Empirical Mode Decomposition (EMD) technique developed as part of the Hilbert-Huang Transform (HHT) is used to singulate the harmonics and non-linear non stationary disturbances from the load currents. The control strategy for the APF is formulated by hybridizing the so called modified p-q theory with the EMD algorithm. A four-leg split-capacitor converter controlled by hysteresis band current controller is used as an APF. The results obtained are compared with those obtained with the conventional modified p-q theory, which does not possess current harmonics or distortions separation strategy, to validate its performance.
△ Less
Submitted 7 June, 2012;
originally announced June 2012.