Showing 1–14 of 14 results for author: USA

The Galactic Chemical Evolution of phosphorus observed with IGRINS

Authors: G. Nandakumar, N. Ryde, M. Montelius, B. Thorsbro, H. Jönsson, G. Mace, Lund Observatory, Department of Astronomy, Theoretical Physics, Lund University, Box 43, SE-221 00 Lund, Sweden, Kapteyn Astronomical Institute, University of Groningen, Landleven 12, NL-9747 AD Groningen, the Netherlands, Department of Astronomy, School of Science, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033, Japan , et al. (11 additional authors not shown)

Abstract: Phosphorus (P) is considered to be one of the key elements for life, making it an important element to look for in the abundance analysis of spectra of stellar systems. Yet, there exists only a handful of spectroscopic studies to estimate the P abundances and investigate its trend across a range of metallicities. We have observed full HK band spectra at a spectral resolving power of R=45,000 with… ▽ More Phosphorus (P) is considered to be one of the key elements for life, making it an important element to look for in the abundance analysis of spectra of stellar systems. Yet, there exists only a handful of spectroscopic studies to estimate the P abundances and investigate its trend across a range of metallicities. We have observed full HK band spectra at a spectral resolving power of R=45,000 with IGRINS instrument. Abundances are determined using SME in combination with 1D MARCS stellar atmosphere models. The investigated sample of stars have reliable stellar parameters estimated using optical FIES spectra (GILD; Jönsson et al. in prep.). In order to determine the P abundances from the 16482.92 Angstrom P line, we take special care of the CO($ν=7-4$) blend. We determine the C, N, O abundances from atomic carbon and a range of non-blended molecular lines (CO, CN, OH) which are aplenty in the H band region of K giant stars, assuring an appropriate modelling of the blending CO($ν=7-4$) line. We present [P/Fe] vs [Fe/H] trend for 38 K giant stars in the metallicity range of -1.2 dex $<$ [Fe/H] $<$ 0.4 dex. We find that our trend matches well with the compiled literature sample of prominently dwarf stars and limited number of giant stars. Our trend is found to be higher by $\sim$ 0.05 - 0.1 dex compared to the theoretical chemical evolution trend in Cescutti et al. 2012 resulting from core collapse supernova (type II) of massive stars with the P yields from Kobayashi et al. (2006) arbitrarily increased by a factor of 2.75. Thus the enhancement factor might need to be $\sim$ 0.05 - 0.1 dex higher to match our trend. We also find an empirically determined primary behaviour for phosphorus. Furthermore, the phosphorus abundance is found to be elevated by $\sim$ 0.6 - 0.9 dex in two metal poor s-enriched stars compared to the theoretical chemical evolution trend. △ Less

Submitted 10 October, 2022; originally announced October 2022.

Comments: 13 pages, 9 figures, accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 668, A88 (2022)

Inverse deformation analysis: an experimental and numerical assessment using the FEniCS Project

Authors: Arnaud Mazier, Alexandre Bilger, Antonio E. Forte, Igor Peterlik, Jack S. Hale, Stéphane P. A. Bordas, ., Institute of Computational Engineering, Department of Engineering, University of Luxembourg, Esch-sur-Alzette, Luxembourg., Harvard University, Cambridge, USA., Department of Electronics, Information, Bioengineering, Politecnico di Milano, Milan, Italy., Institute of Computer Science, Masaryk University, Czech Republic., Institute of Research , et al. (3 additional authors not shown)

Abstract: In this paper, we develop a framework for solving inverse deformation problems using the FEniCS Project finite element software. We validate our approach with experimental imaging data acquired from a soft silicone beam under gravity. In contrast with inverse iterative algorithms that require multiple solutions of a standard elasticity problem, the proposed method can compute the undeformed config… ▽ More In this paper, we develop a framework for solving inverse deformation problems using the FEniCS Project finite element software. We validate our approach with experimental imaging data acquired from a soft silicone beam under gravity. In contrast with inverse iterative algorithms that require multiple solutions of a standard elasticity problem, the proposed method can compute the undeformed configuration by solving only one modified elasticity problem. This modified problem has a complexity comparable to the standard one. The framework is implemented within an open-source pipeline enabling the direct and inverse deformation simulation directly from imaging data. We use the high-level Unified Form Language (UFL) of the FEniCS Project to express the finite element model in variational form and to automatically derive the consistent Jacobian. Consequently, the design of the pipeline is flexible: for example, it allows the modification of the constitutive models by changing a single line of code. We include a complete working example showing the inverse deformation of a beam deformed by gravity as supplementary material. △ Less

Submitted 26 February, 2021; originally announced February 2021.

Comments: 33 pages, 12 figures, submitted to Elsevier

How to Deal with Fake News: Visualizing Disinformation

Authors: F. Espinoza, Department of Physics, Astronomy, Hofstra University, Hempstead, NY. USA., Department of Chemistry, Physics-Adolescence Education, SUNY Old Westbury, Old Westbury, NY. USA

Abstract: The current public sense of anxiety in dealing with disinformation as manifested by so-called fake news is acutely displayed by the reaction to recent events prompted by a belief in conspiracies among certain groups. A model to deal with disinformation is proposed; it is based on a demonstration of the analogous behavior of disinformation to that of wave phenomena. Two criteria form the basis to c… ▽ More The current public sense of anxiety in dealing with disinformation as manifested by so-called fake news is acutely displayed by the reaction to recent events prompted by a belief in conspiracies among certain groups. A model to deal with disinformation is proposed; it is based on a demonstration of the analogous behavior of disinformation to that of wave phenomena. Two criteria form the basis to combat the deleterious effects of disinformation: the use of a refractive medium based on skepticism as the default mode, and polarization as a filter mechanism to analyze its merits based on evidence. Critical thinking is enhanced since the first one tackles the pernicious effect of the confirmation bias, and the second the tendency towards attribution, both of which undermine our efforts to think and act rationally. The benefits of such a strategy include an epistemic reformulation of disinformation as an independently existing phenomenon, that removes its negative connotations when perceived as being possessed by groups or individuals. △ Less

Submitted 22 January, 2021; originally announced January 2021.

Comments: Four figures explaining the proposed mechanism that describe wave properties and behavior. The quantitative details are kept to a minimum so as to highlight the relevance of the treatment of disinformation as a wave, to the larger public sphere

Multi-nucleon transfer in the interaction of 977 MeV and 1143 MeV $^{204}$Hg with $^{208}$Pb

Authors: V. V. Desai, A. Pica, W. Loveland, J. S. Barrett, Department of Chemistry, Oregon State University, Corvallis, Oregon 97331 USA, E. A. McCutchan, National Nuclear Data Center, Brookhaven National Laboratory, Upton, New York 11973, USA, S. Zhu, M. P. Carpenter, J. P. Greene, T. Lauritsen, Physics Division, Argonne National Laboratory, Argonne, Illinois 60439 USA, R. V. F. Janssens, Department of Physics, Astronomy , et al. (16 additional authors not shown)

Abstract: A previous study of symmetric collisions of massive nuclei has shown that current models of multi-nucleon transfer (MNT) reactions do not adequately describe the transfer product yields. To gain further insight into this problem, we have measured the yields of MNT products in the interaction of 977 (E/A = 4.79 MeV) and 1143 MeV (E/A = 5.60 MeV) $^{204}$Hg with $^{208}$Pb. We find that the yield of… ▽ More A previous study of symmetric collisions of massive nuclei has shown that current models of multi-nucleon transfer (MNT) reactions do not adequately describe the transfer product yields. To gain further insight into this problem, we have measured the yields of MNT products in the interaction of 977 (E/A = 4.79 MeV) and 1143 MeV (E/A = 5.60 MeV) $^{204}$Hg with $^{208}$Pb. We find that the yield of multi-nucleon transfer products are similar in these two reactions and are substantially lower than those observed in the reaction of 1257 MeV (E/A = 6.16 MeV) $^{204}$Hg + $^{198}$Pt. We compare our measurements with the predictions of the GRAZING-F, di-nuclear systems (DNS) and improved quantum molecular dynamics (ImQMD) models. For the observed isotopes of the elements Au, Hg, Tl, Pb and Bi, the measured values of the MNT cross sections are orders of magnitude larger than the predicted values. Furthermore, the various models predict the formation of nuclides near the N=126 shell, which are not observed. △ Less

Submitted 13 July, 2020; originally announced July 2020.

Comments: 11 figures. arXiv admin note: text overlap with arXiv:1505.00257

Journal ref: Physical Review C 101, 034612 (2020)

Intra-bunch feedback system developments at DAFNE

Authors: Alessandro Drago, INFN-LNF, Frascati, Tor Vergata University, Rome, Italy D. Alesini, S. Caschera, A. Gallo, INFN-LNF, Frascati, Italy J. D. Fox, Stanford University, Stanford, USA J. Cesaratto, J. Dusatko, J. Olsen, C. Rivetta, O. Turgut, SLAC, Menlo Park, USA W. Hofle, G. Iadarola, K. Li, E. Metral, E. Montesinos , et al. (12 additional authors not shown)

Abstract: This paper presents history and evolution of the intra-bunch feedback system for circular accelerators. This pro-ject has been presented by John D. Fox (SLAC/Stanford Un.) at the IPAC2010 held in Kyoto. The idea of the pro-posal is to build a flexible and powerful instrument to mit-igate the parasitic e-cloud effects on the proton (and poten-tially positron) beams in storage rings. Being a new and… ▽ More This paper presents history and evolution of the intra-bunch feedback system for circular accelerators. This pro-ject has been presented by John D. Fox (SLAC/Stanford Un.) at the IPAC2010 held in Kyoto. The idea of the pro-posal is to build a flexible and powerful instrument to mit-igate the parasitic e-cloud effects on the proton (and poten-tially positron) beams in storage rings. Being a new and ambitious project, the financial issues have been quite im-portant. US LHC Accelerator Research Program (LARP) and other institution funding sources have assured the de-velopment of the design for implementing the feedback in the SPS ring at CERN. Here the intra-bunch feedback sys-tem has been installed and tested in the frame of the LIU (LHC Injector Upgrade) program. After the end of the LARP funding, a possible new inter-esting chance to continue the R&D activity, could be by implementing the system in a lepton storage ring affected by e-cloud effects. For achieving this goal, a possible ex-periment could be carried out in the positron ring of DAFNE at Frascati, Italy. The feasibility of the proposal is evaluated in the following sections. In case of approval of the experiment, indeed the project could be inserted in the DAFNE-TF (DAFNE Test Facility) program that is fore-seen after the 2020 for the following 3-5 years. △ Less

Submitted 24 April, 2020; originally announced April 2020.

Comments: 6 pages, 5 figures, Sixth e-cloud workshop, ECLOUD'18 , 3-7 June, 2018, La Biodola (Isola d'Elba ), Italy

High-Temperature Conventional Superconductivity in the Boron-Carbon system: Material Trends

Authors: Santanu Saha, Simone Di Cataldo, Maximilian Amsler, Wolfgang von der Linden, Lilia Boeri, Graz University of Technology, NAWI Graz, 8010 Graz, Austria, Dipartimento di Fisica, Università di Roma La Sapienza, Piazzale Aldo Moro 5, I-00185 Roma, Italy, Department of Materials Science, Engineering, Cornell University, Ithaca, New York 14853, USA, Department of Chemistry, Biochemistry, University of Bern, Freiestrasse 3, CH-3012 Bern , et al. (1 additional authors not shown)

Abstract: In this work we probe the possibility of high-temperature conventional superconductivity in the boron-carbon system, using ab-initio screening. A database of 320 metastable structures with fixed composition (50$\%$/50$\%$) is generated with the Minima-Hop** method, and characterized with electronic and vibrational descriptors. Full electron-phonon calculations on sixteen representative structure… ▽ More In this work we probe the possibility of high-temperature conventional superconductivity in the boron-carbon system, using ab-initio screening. A database of 320 metastable structures with fixed composition (50$\%$/50$\%$) is generated with the Minima-Hop** method, and characterized with electronic and vibrational descriptors. Full electron-phonon calculations on sixteen representative structures allow to identify general trends in $T_{\textrm{c}}$ across and within the four families in the energy landscape, and to construct an approximate $T_{\textrm{c}}$ predictor, based on transparently interpretable and easily computable electronic and vibrational descriptors. Based on these, we estimate that around 10$\%$ of all metallic structures should exhibit $T_{\textrm{c}}$'s above 30 $K$. This work is a first step towards ab-initio design of new high-$T_{\textrm{c}}$ superconductors. △ Less

Submitted 7 April, 2020; originally announced April 2020.

Comments: 16 pages, 21 figures, 1 table

Journal ref: Phys. Rev. B 102, 024519 (2020)

Imaging and Modeling Data from the Hydrogen Epoch of Reionization Array

Authors: C. L. Carilli{1, 2}, N. Thyagarajan{1}, J. Kent{2}, B. Nikolic{2}, K. Gale-Sides{2}, N. S. Kern{3}, G. Bernardi{4, 5, 6}, A. Mesinger{7}, S. Matika{5}, the HERA TEAM {1}{National Radio Astronomy Observatory, P. O. Box 0, Socorro, NM 87801, USA, ccarilli@nrao. edu, ORCID, :, 0000-0001-6647-3861} {2}{Astrophysics Group, Cavendish Laboratory, JJ Thomson Avenue, Cambridge CB3 0HE, UK} {3}{Department of Astronomy , et al. (21 additional authors not shown)

Abstract: We analyze data from the Hydrogen Epoch of Reionization Array. This is the third in a series of papers on the closure phase delay-spectrum technique designed to detect the HI 21cm emission from cosmic reionization. We present the details of the data and models employed in the power spectral analysis, and discuss limitations to the process. We compare images and visibility spectra made with HERA da… ▽ More We analyze data from the Hydrogen Epoch of Reionization Array. This is the third in a series of papers on the closure phase delay-spectrum technique designed to detect the HI 21cm emission from cosmic reionization. We present the details of the data and models employed in the power spectral analysis, and discuss limitations to the process. We compare images and visibility spectra made with HERA data, to parallel quantities generated from sky models based on the GLEAM survey, incorporating the HERA telescope model. We find reasonable agreement between images made from HERA data, with those generated from the models, down to the confusion level. For the visibility spectra, there is broad agreement between model and data across the full band of $\sim 80$MHz. However, models with only GLEAM sources do not reproduce a roughly sinusoidal spectral structure at the tens of percent level seen in the observed visibility spectra on scales $\sim 10$ MHz on 29 m baselines. We find that this structure is likely due to diffuse Galactic emission, predominantly the Galactic plane, filling the far sidelobes of the antenna primary beam. We show that our current knowledge of the frequency dependence of the diffuse sky radio emission, and the primary beam at large zenith angles, is inadequate to provide an accurate reproduction of the diffuse structure in the models. We discuss implications due to this missing structure in the models, including calibration, and in the search for the HI 21cm signal, as well as possible mitigation techniques. △ Less

Submitted 18 February, 2020; originally announced February 2020.

Comments: 17 pages, 10 figures, accepted for the ApJ Supplement

Open-Source Projects and their Collaborative Development Workflows

Authors: Panuchart Bunyakiati, Usa Sammapun

Abstract: For teams using distributed version control systems, the right collaborative development workflows can help maintaining the long-term quality of project repositories and improving work efficiency. Despite the fact that the workflows are important, empirical evidence on how they are used and what impact they make on the project repositories is scarce. Most suggestions on the use of workflows are me… ▽ More For teams using distributed version control systems, the right collaborative development workflows can help maintaining the long-term quality of project repositories and improving work efficiency. Despite the fact that the workflows are important, empirical evidence on how they are used and what impact they make on the project repositories is scarce. Most suggestions on the use of workflows are merely expert opinions. Often, there is only some anecdotal evidence that underpins those advices. As a result, we do not know what workflows are used, how the developers are using them, and what impact do they have on the project repositories. This work investigates the various collaborative development workflows in eight major open-source projects, identifies and analyses the workflows together with the structures of their project repositories, discusses their similarities and differences, and lays out the future works. △ Less

Submitted 25 April, 2020; v1 submitted 2 September, 2019; originally announced September 2019.

Comments: 3 pages, ASE 2019 Late Breaking Results

SCMA for Open-Loop Joint Transmission CoMP

Authors: Usa Vilaipornsawai, Hosein Nikopour, Alireza Bayesteh, Jianglie Ma

Abstract: Sparse Code Multiple Access (SCMA), a non-orthogonal multiple access scheme, has been introduced as a key 5G technology to improve spectral efficiency. In this work, we propose SCMA to enable open-loop coordinated multipoint (CoMP) joint transmission (JT). The scheme combines CoMP techniques with multi-user SCMA (MU-SCMA) in downlink. This scheme provides open-loop user multiplexing and JT in powe… ▽ More Sparse Code Multiple Access (SCMA), a non-orthogonal multiple access scheme, has been introduced as a key 5G technology to improve spectral efficiency. In this work, we propose SCMA to enable open-loop coordinated multipoint (CoMP) joint transmission (JT). The scheme combines CoMP techniques with multi-user SCMA (MU-SCMA) in downlink. This scheme provides open-loop user multiplexing and JT in power and code domains, with robustness to mobility and low overhead of channel state information (CSI) acquisition. The combined scheme is called MU-SCMA-CoMP, in which SCMA layers and transmit power of multiple transmit points (TPs) are shared among multiple users while a user may receive multiple SCMA layers from multiple TPs within a CoMP cluster. The benefits of the proposed scheme includes: i) drastic overhead reduction of CSI acquisition, ii) significant increase in throughput and coverage, and iii) robustness to channel aging. Various algorithms of MU-SCMA-CoMP are presented, including the detection strategy, power sharing optimization, and scheduling. System level evaluation shows that the proposed schemes provide significant throughput and coverage gains over OFDMA for both pedestrian and vehicular users. △ Less

Submitted 7 April, 2015; originally announced April 2015.

Uplink Contention Based SCMA for 5G Radio Access

Authors: Kelvin Au, Liqing Zhang, Hosein Nikopour, Eric Yi, Alireza Bayesteh, Usa Vilaipornsawai, Jianglei Ma, Peiying Zhu

Abstract: Fifth generation (5G) wireless networks are expected to support very diverse applications and terminals. Massive connectivity with a large number of devices is an important requirement for 5G networks. Current LTE system is not able to efficiently support massive connectivity, especially on the uplink (UL). Among the issues arise due to massive connectivity is the cost of signaling overhead and la… ▽ More Fifth generation (5G) wireless networks are expected to support very diverse applications and terminals. Massive connectivity with a large number of devices is an important requirement for 5G networks. Current LTE system is not able to efficiently support massive connectivity, especially on the uplink (UL). Among the issues arise due to massive connectivity is the cost of signaling overhead and latency. In this paper, an uplink contention-based sparse code multiple access (SCMA) design is proposed as a solution. First, the system design aspects of the proposed multiple-access scheme are described. The SCMA parameters can be adjusted to provide different levels of overloading, thus suitable to meet the diverse traffic connectivity requirements. In addition, the system-level evaluations of a small packet application scenario are provided for contention-based UL SCMA. SCMA is compared to OFDMA in terms of connectivity and drop rate under a tight latency requirement. The simulation results demonstrate that contention-based SCMA can provide around 2.8 times gain over contention-based OFDMA in terms of supported active users. The uplink contention-based SCMA scheme can be a promising technology for 5G wireless networks for data transmission with low signaling overhead, low delay, and support of massive connectivity. △ Less

Submitted 22 July, 2014; v1 submitted 21 July, 2014; originally announced July 2014.

Comments: Submitted to Golobecom 5G workshop 2014

NuSTAR Discovery of a cyclotron line in KS 1947+300

Authors: Felix Fuerst, Katja Pottschmidt, Joern Wilms, Jamie Kennea, Matteo Bachetti, Eric Bellm, Steven E. Boggs, Deepto Chakrabarty, Finn E. Christensen, William W. Craig, Charles J. Hailey, Fiona Harrison, Daniel Stern1, John A. Tomsick, Dominic J. Walton, William Zhang, Cahill Center, Caltech, USA, CSST, UMBC, USA, CRESST, GSFC, USA , et al. (27 additional authors not shown)

Abstract: We present a spectral analysis of three simultaneous NuSTAR and Swift/XRT observations of the transient Be-neutron star binary KS 1947+300 taken during its outburst in 2013/2014. These broad-band observations were supported by Swift/XRT monitoring snap-shots every 3 days, which we use to study the evolution of the spectrum over the outburst. We find strong changes of the power-law photon index, wh… ▽ More We present a spectral analysis of three simultaneous NuSTAR and Swift/XRT observations of the transient Be-neutron star binary KS 1947+300 taken during its outburst in 2013/2014. These broad-band observations were supported by Swift/XRT monitoring snap-shots every 3 days, which we use to study the evolution of the spectrum over the outburst. We find strong changes of the power-law photon index, which shows a weak trend of softening with increasing X-ray flux. The neutron star shows very strong pulsations with a period of P ~ 18.8 s. The 0.8-79 keV broad-band spectrum can be described by a power-law with an exponential cutoff and a black-body component at low energies. During the second observation we detect a cyclotron resonant scattering feature at 12.5 keV, which is absent in the phase-averaged spectra of observations 1 and 3. Pulse phase-resolved spectroscopy reveals that the strength of the feature changes strongly with pulse phase and is most prominent during the broad minimum of the pulse profile. At the same phases the line also becomes visible in the first and third observation at the same energy. This discovery implies that KS 1947+300 has a magnetic field strength of B ~ 1.1e12 (1+z)G, which is at the lower end of known cyclotron line sources. △ Less

Submitted 7 March, 2014; originally announced March 2014.

Comments: 6 pages, 3 figures, accepted for publication in ApJ Letters

Amplitude Fine-Structure in the Cepheid P-L Relation I: Amplitude Distribution Across the RR Lyrae Instability Strip Mapped Using the Accessibility Restriction Imposed by the Horizontal Branch

Authors: Allan Sandage, Observatories of the Carnegie Institution of Washington, Pasadena, CA, USA

Abstract: The largest amplitude light curves for both RR Lyrae (RRL) variables and classical Cepheids with periods less than 10 days and greater than 20 days occur at the blue edge of the respective instability strips. It is shown that the equation for the decrease in amplitude with penetration into the strip from the blue edge, and hence the amplitude fine structure within the strip, is the same for RRL an… ▽ More The largest amplitude light curves for both RR Lyrae (RRL) variables and classical Cepheids with periods less than 10 days and greater than 20 days occur at the blue edge of the respective instability strips. It is shown that the equation for the decrease in amplitude with penetration into the strip from the blue edge, and hence the amplitude fine structure within the strip, is the same for RRL and the Cepheids despite their metallicity differences. However, the manifestation of this identity is different between the two classes of variables because the sampling of the RRL strip is restricted by the discrete strip positions of the horizontal branch, a restriction that is absent for the Cepheids in stellar aggregates with a variety of ages. To show the similarity of the strip amplitude fine structure for RRL and Cepheids we make a grid of lines of constant amplitude in the HR diagram of the strip using amplitude data for classical Cepheids in the Galaxy, LMC, and SMC. The model implicit in the grid, that also contains lines of constant period, is used to predict the correlations between period, amplitude, and color for the two Oosterhoff RRL groups in globular clusters. The good agreement of the predictions with the observations using the classical Cepheid amplitude fine structure also for the RRL shows one aspect of the unity of the pulsation processes between the two classes of variables. △ Less

Submitted 8 June, 2010; originally announced June 2010.

Comments: 24 pages, 3 tables, 5 figures, submitted to The Astrophysical Journal

High Power Testing Results of the X-Band Mixed-Mode RF Windows for Linear Colliders

Authors: S. Tokumoto, Y. H. Chin, H. Mizuno, K. Ohya, S. Yamaguchi, KEK, Tsukuba, Japan S. Kazakov, BINP, Protvino, Moscow, Russia R. Loewen, R. Fowkes, A. Menegat, A. Vlieks, SLAC, Stanford, CA, USA

Abstract: In this paper, we summarize the high power testing results of the X-band mixed-mode RF windows at KEK and SLAC for linear colliders. The main feature of these windows is that the combination of modes on the surface of the ceramic significantly decreases the electric and magnetic fields in the junction between the ceramic and the metal. So far two types of high power windows (with the diameter of… ▽ More In this paper, we summarize the high power testing results of the X-band mixed-mode RF windows at KEK and SLAC for linear colliders. The main feature of these windows is that the combination of modes on the surface of the ceramic significantly decreases the electric and magnetic fields in the junction between the ceramic and the metal. So far two types of high power windows (with the diameter of 53 mm and 64 mm) have been fabricated. A high power model of the smaller type window was fabricated and tested in a resonant ring at KEK. A maximum circulating power of 81 MW with 300 ns duration or 66 MW with 700 ns duration was achieved. Light emission was observed for a power level of over 10 MW. Later, both windows were shipped to SLAC for even higher power testing using combined power from two klystrons. The first window (53 mm diameter) achieved a transmitted power of 80 MW with 1.5 microsec duration at 30 Hz repetition. It was not destroyed during the testing. The testing of the second window was carried out next to the small type and achieved 62 MW with 1.5 maicrosec duration with 10 Hz repetition. The final results of both windows are presented in this report. △ Less

Submitted 19 August, 2000; originally announced August 2000.

Comments: LINAC2000

Report number: THA02

Journal ref: eConf C000821 (2000) THA02

Problems on geometric structures of projective embeddings

Authors: Takeshi Usa

Abstract: This is a survey of our research on geometric structures of projective embeddings and includes some topics of our talks in several symposia during 1990-99. We clarify our main problem, which is to construct a kind of geometric composition series of projective embeddings. The concept of "geometric composition series" is an analogy in Algebraic Geometry with Jordan-Hölder series in Group Theory. W… ▽ More This is a survey of our research on geometric structures of projective embeddings and includes some topics of our talks in several symposia during 1990-99. We clarify our main problem, which is to construct a kind of geometric composition series of projective embeddings. The concept of "geometric composition series" is an analogy in Algebraic Geometry with Jordan-Hölder series in Group Theory. We present two of the candidates for the construction problem. To approach this problem, we show several results and new tools for handling higher obstructions appearing in infinitesimal liftings. As a byproduct of the tools, we obtain a simplified proof for a criterion on arithmetic normality described in terms of Differential Geometry. (Keywords): Petri's analysis, Second fundamental form, Syzygy, Arithmetic normality, Infinitesimal lifting, Geometric shell, Geometric composition series, Lefschetz chain, Dual Lefschetz chain, Meta-Lefschetz operator. △ Less

Submitted 3 January, 2000; originally announced January 2000.

Comments: 25 pages, AmS-LaTeX with P.Burchard's diagram package(pb-diagram.sty)

MSC Class: 14N99